706992
21
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
16
You can update the firmware only when the unit is connected to the Internet ( P.6).
Follow the instructions in the MusicCast CONTROLLER app to update.
While the firmware is being updated, the indicators flashes from the left in order, in accordance with the progress.
Updating completed: All indicators light, and the unit automatically enters standby mode.
Updating failed: All the indicators flash. Unplug the power cable from the wall outlet and plug it in after 30 seconds or
more, then update the firmware again.
Do not operate the unit or disconnect the power cable or network cables while updating.
Do not turn off the unit (enter standby) while updating the firmware.
y
The update of the firmware will be informed in the app.
When Internet speed is not fast enough or the unit is connected to the wireless network via a wireless network adapter,
network update may not be possible depending on the condition of the wireless connection.
To set the unit to option setting mode, where you can make the following settings, set the unit to standby, and then touch and
hold and for 5 seconds.
*1: If you do not tap any button during these 10 seconds, the unit will cancel the option setting mode.
*2: Network Standby is a standby which enables the unit to connect to the network by operating another device.
y
Eco Standby
If you disable Network Standby, the unit enters a standby where indicators and the network/Bluetooth functions are disabled
and where the standby power consumption is kept to a minimum.
While the unit is in Eco Standby, you cannot start it up with the MusicCast CONTROLLER app or specify stereo pair settings.
Perform these operations after turning on the unit by tapping (power)/CONNECT.
UPDATING THE FIRMWARE
OPTION SETTINGS
Items Operations
Initialize the unit.
Touch and hold (power)/CONNECT for 3 seconds ( P.3). During initialization, the three
indicators flash for about 20 seconds.
Enable/disable Network
Standby.
*2
Touch and hold for 3 seconds. Network Standby will be disabled. To enable it, perform the same
operation.
Enable: The power indicator flashes twice and remains lit.
Disable: The power indicator flashes twice and turns off.
Disable Wi-Fi.
Touch and hold for 3 seconds. Wi-Fi will be disabled.
The Wi-Fi indicator flashes twice and turns off.
To enable the Wi-Fi function, follow the procedures in “Connecting to the network“ ( P.6) and
reconnect the unit to the network.
Enable/Disable Bluetooth.
Touch and hold for 3 seconds. Bluetooth will be disabled. To enable it, perform the same operation.
Enable: The Bluetooth indicator flashes twice and remains lit.
Disable: The Bluetooth indicator flashes twice and turns off.
Flashes from the left in order
Indicator display
Note
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yamaha MusicCast - WX-010 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yamaha MusicCast - WX-010 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,46 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Yamaha MusicCast - WX-010

Yamaha MusicCast - WX-010 Gebruiksaanwijzing - Nederlands - 26 pagina's

Yamaha MusicCast - WX-010 Gebruiksaanwijzing - Deutsch - 26 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info