707395
22
Verklein
Vergroot
Pagina terug
1/84
Pagina verder
MODX Owner’s Manual
18
Power Supply
Connect the supplied AC adaptor in the following order.
Before you connect the AC adaptor, make sure the
[P] (Standby/On) switch on the instrument is set to the
Standby
(N) position.
1 Wrap the DC output cable of the AC adaptor
around the cable clip (as shown below), and
then connect the plug of the adaptor to the
DC IN jack on the rear panel.
NOTE
Use of the cable clip prevents accidental unplugging of the
cable during operation. Make sure to avoid tightening the cord
more than necessary or pulling on the cord strongly while it is
wrapped around the cable clip to prevent wear on the cord or
possible breakage of the clip.
2 Connect the other end of the AC adaptor to
an AC outlet.
NOTE
Reverse the order of the instruction steps above when disconnecting
the AC adaptor.
WARNING
Use the specified AC adaptor (page 71) only. Using the wrong
AC adaptor can result in damage to the instrument or
overheating.
When using the AC adaptor with
a removable plug, make sure to
keep the plug attached to the AC
adaptor. Using the plug alone can
cause electric shock or fire.
Never touch the metallic section
when attaching the plug. To avoid
electric shock, short circuit or
damage, also be careful that
there is no dust between the AC
adaptor and plug.
CAUTION
When setting up the product, make sure that the AC outlet you
are using is easily accessible. If some trouble or malfunction
occurs, immediately turn the power off and disconnect the
plug from the outlet.
The instrument remains charged and draws a small amount of
power even when the [P] (Standby/On) is set to the Standby
position. For this reason, if you intend not to use it for an
extended period of time, make sure to unplug the power cord
from the wall outlet.
Connecting Speakers or Headphones
Since the instrument has no built-in speakers, you will need
to monitor the sound of the instrument by using external
equipment. Connect a set of headphones, powered
speakers, or other playback equipment as illustrated below.
When making connections, be sure that your cables have
the appropriate ratings.
Powering Up the System
Make sure the volume settings of the instrument and external
devices such as powered speakers are turned to the
minimum before turning the power on. When connecting the
instrument to powered speakers, turn on the power switch of
each device in the following order.
When turning the power on:
First, the instrument (the display will turn on and the buttons
will light), then the connected powered speakers.
When turning the power off:
First, the connected powered speakers, then the instrument
(the display will turn off and the buttons will turn off).
Keep in mind that the [P] (Standby/On) switch is located at
the left side (from the view of the keyboard) of the DC IN
socket on the rear panel of the instrument.
Setting Up
Cable clip
Be careful not to bend
the connector
1
2
DC IN jack (page 16)
AC outlet
AC adaptor
Plug
Slide the plug as indicated.
The shape of the plug differs
depending on your area.
Powered speaker (left)
Powered speaker (right)
Headphones
OUTPUT L/MONO OUTPUT R
PHONES
DC IN
[P] (Standby/On) switch
22

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Yamaha-Modx

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yamaha Modx bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yamaha Modx in de taal/talen: Engels als bijlage per email.

De handleiding is 13,53 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Yamaha Modx

Yamaha Modx Gebruiksaanwijzing - Nederlands - 80 pagina's

Yamaha Modx Gebruiksaanwijzing - Deutsch - 80 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info