2Install the appropriate driver to your computer..................................................................................................page 4
3Install the MOTIF XS Editor VST............................................................................................................................page 5
4Start up the MOTIF XS Editor VST in the DAW application..........................................................................page 5
For subsequent operations, refer to the PDF manual accessed from the [HELP] menu in the respective software
program.
Precautions when using the USB TO HOST connector
When connecting the computer to the USB TO HOST connector, make sure to observe the following points. Failing to do so
risks freezing the computer and corrupting or even losing the data. If the computer or the instrument freezes, turn the power
to the instrument off or restart the computer.
•Before connecting the computer to the USB TO HOST connector, exit from any power-saving mode
(such as suspended, sleep, standby) of the computer.
•Before turning on the power to the instrument, connect the computer to the USB TO HOST connector.
•Execute the following before turning the power to the instrument on/off or plugging/unplugging the USB
cable to/from the USB TO HOST connector.
-Quit any open applications.
-Make sure that data is not being transmitted from the instrument. (Data is transmitted only by playing
notes on the keyboard or playing back a song.)
•While a USB device is connected to the instrument, you should wait for six seconds or more between
these operations: (1) when turning the power of the instrument off then on again, or (2) when alternately
connecting/disconnecting the USB cable.
MOTIF XS Editor VST
Installing the Software
CAUTION
MOTIF XS Editor VST Installation Guide4
These are basically the same as those of the Cubase series (version 5.1.1 or later) as a host application. Regarding
Mac OS, only Mac OS 10.5 or later is supported. Note that this software does not support PowerPC architectures.
nKeep in mind that the software is often updated and the system requirements are subject to change. You can check the latest version
information of each program and its system requirements at the following website
http://www.yamahasynth.com/
The system requirements may differ slightly depending on the particular computer.
To use the MOTIF XS Editor VST as a VST3 plug-in of the DAW application, you’ll need to install the following
software programs. Follow the appropriate instructions below corresponding to the software you’re using.
Driver Installation
To operate your Yamaha hardware from your computer via a USB cable or an IEEE1394 cable, you’ll need to install
the USB-MIDI driver software or Yamaha Steinberg FW Driver software. The USB-MIDI driver is necessary when
using a USB connection to transfer MIDI data back and forth between your computer’s DAW application and the
MOTIF XS6/7/8.
The Yamaha Steinberg FW Driver is necessary when using an IEEE1394 connection to transfer Audio/MIDI data
back and forth between your computer’s DAW application and the MOTIF XS (MOTIF XS6/7 with optional
mLAN16E2 or FW16E installed, or MOTIF XS8).
nMOTIF XS Editor VST cannot be used over a MIDI connection.
nMake sure to properly install an audio device when connecting the MOTIF XS instrument to the computer via USB cable. For more
details, refer to the section “Audio Connection to the Computer” (page 5).
Minimum System Requirements
Software Installation
•USB-MIDI Driver or Yamaha Steinberg FW Driver
•MOTIF XS Editor VST
Make sure to check the following website for installation and up-to-date news on the USB-MIDI driver.
http://www.global.yamaha.com/download/usb_midi/
Make sure to check the following website for installation and up-to-date news on the and Yamaha Steinberg FW Driver.
http://www.global.yamaha.com/download/
DAW
USB cable
Driver
ComputerIEEE1394 cableMOTIF XS
MOTIF XS Editor VST Installation Guide5
MOTIF XS Editor VST Installation
Follow the instructions below to install the MOTIF XS Editor VST programs.
Windows
1After the downloaded compressed file is properly extracted, double-click the “setup.exe” file.
The MOTIF XS Editor VST setup dialog appears.
2Follow the on-screen instructions to install the software.
Mac
1After the downloaded compressed file is properly extracted, double-click the “install MOTIF XS Editor
VST.pkg” file.
The MOTIF XS Editor VST setup dialog appears.
2Follow the on-screen instructions to install the software.
When the MOTIF XS Editor VST and the other necessary software is installed, you can start the MOTIF XS Editor
VST. You’ll need to start the MOTIF XS Editor VST from the VST Instrument window of DAW application. For details
about starting and setting up the DAW application, refer to the manual of the DAW application.
Follow the instructions below to remove the installed editors from your computer.
nThe button names or menus may differ depending on the computer OS.
Windows
Select [START] → [Control Panel] → [Add or Remove Programs] →“Change or Remove Programs”, then select
[Yamaha MOTIF XS Editor VST] to be removed and click [Change/Remove].
Follow the on-screen instructions to uninstall the application.
Mac
After the downloaded compressed file is properly extracted, double-click the “Uninstall MOTIF XS Editor VST.app”
file, then follow the on-screen instructions to uninstall the application.
An audio connection between the MOTIF XS instrument and the computer is needed to use the MOTIF XS Editor
VST correctly. With such a connection, the MOTIF XS Editor VST provides full functionality, including the freeze
function, mixing within the Audio Mixer of Cubase, and other convenient features common to other VST instrument
software.
When using the Yamaha Steinberg FW Driver, an audio connection is completed automatically.
When using the USB-MIDI Driver, you need an audio interface to connect to the MOTIF XS. After installation of the
audio device, select the audio ports in the VSTi Setup window within the MOTIF XS Editor VST.
nWhen using the MIDI connection via USB-MIDI Driver, you need to select the audio ports in the VSTi Setup window. If no audio port is
selected, or no audio device is installed to the computer, an error message appears. Make sure to set the audio ports in the VSTi Setup
window.
Software Uninstall (removing the installed application)
Audio Connection to the Computer
MOTIF XS Editor VST Installation Guide6
When starting the MOTIF XS Editor VST after the installation and controlling the MOTIF XS6/7/8
from your computer via a USB or IEEE1394 cable, the MOTIF XS6/7/8 does not operate correctly.
•Did you install the latest Driver?.....................................................................................................................page 4
•Is the USB or IEEE1394 cable used to connect the MOTIF XS6/7/8 to your computer connected correctly?
Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.
Product:
Spelregels forum
Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:
lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;
Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.
Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.
Abonneren
Abonneer u voor het ontvangen van emails voor uw Yamaha MOTIF XS7 bij:
nieuwe vragen en antwoorden
nieuwe handleidingen
U ontvangt een email met instructies om u voor één of beide opties in te schrijven.
Ontvang uw handleiding per email
Vul uw emailadres in en ontvang de handleiding van Yamaha MOTIF XS7 in de taal/talen: Engels als bijlage per email.
De handleiding is 0,16 mb groot.
U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.
Uw handleiding is per email verstuurd. Controleer uw email
Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.
Er is een email naar u verstuurd om uw inschrijving definitief te maken.
Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken
U heeft geen emailadres opgegeven
Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.
Uw vraag is op deze pagina toegevoegd
Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.