571272
228
Verklein
Vergroot
Pagina terug
1/300
Pagina verder
Reference Song Mode
Song Job mode
228 Owner’s Manual
Rate Determines the percentage by which the gate time of the target notes will be changed.
Settings below 100% shorten the notes, and settings above 100% lengthen the notes proportionately. When the Set
All parameter (above) is set to something other than “off,” this parameter appears as “***” and cannot be changed.
Settings: 000% ~ 200%, ***
Offset Adds a fixed value to the Rate-adjusted gate time values. A setting of 0 produces no change. Settings below 0
shorten the gate time, and settings above 0 lengthen the gate time. When the Set All parameter (above) is set to
something other than “off,” this parameter appears as “***” and cannot be changed.
Settings: -9999 ~ +9999, ***
04: Crescendo This Job lets you create a crescendo or decrescendo over the specified range of notes. (Crescendo is a gradual
increase in volume, and decrescendo is a gradual decrease.)
TR (Track)
001 : 1 : 000 - 999 : 4 : 479 Determines the track (01-16, all) and range of measures/beats/clocks over which the Job is applied.
VelocityRange Determines the intensity of the crescendo or decrescendo. The velocity values of the notes in the specified range
are gradually increased or decreased starting at the first note in the range. The velocity of the last note in the range
becomes the original velocity of the note plus the Velocity Range value. If the resultant velocity is outside the 1 ~ 127
range, it is set to 1 or 127 accordingly. Settings greater than 0 produce a crescendo, and settings less than 0
produce a decrescendo. A setting of 0 produces no effect.
Settings: -127 ~ +127
05: Transpose Transpose lets you change the key or pitch of the notes in the specified range.
TR (Track)
001 : 1 : 000 - 999 : 4 : 479 Determines the track (01-16, all) and range of measures/beats/clocks over which the Job is applied.
Note Determines the range of note pitches over which the Job is applied. You can also set the Note directly from the
Keyboard, by holding down the [INFORMATION] button and pressing the desired key (page 53).
Settings: C-2 ~ G8
Transpose Transposes notes in the specified range (in semitones). A setting of +12 transposes up one octave, while a setting of
-12 transposes down an octave. A setting of 0 produces no change.
Settings: -127 ~ +127
06: Glide The Glide Job replaces all notes following the first note in the specified range with pitch bend data, producing
smooth glides from note to note. This is ideal for producing guitar-like slide or note-bending effects.
TR (Track)
001 : 1 : 000 - 999 : 4 : 479 Determines the track (01-16, all) and range of measures/beats/clocks over which the Job is applied.
GlideTime Determines the length of the glide. Higher values produce a longer glide between notes.
Settings: 000~100
PBRange (Pitch Bend Range) Determines the maximum pitch bend range to be applied by the Glide Job (in semitones).
Settings: 01~24
07: Create Roll This Job creates a series of repeated notes (like a drum roll) in the specified range with the specified continuous
changes in clock step and velocity. This is ideal for creating fast staccato rolls and special stuttering effects.
TR (Track)
001 : 1 : 000 - 999 : 4 : 479 Determines the track (01-16) and range of measures/beats/clocks over which the Job is applied.
StartStep (Starting Step)
EndStep (Ending Step) Determines the size of the step (i.e. the number of clocks) between each note in the roll. Both the starting and
ending clock values can be specified, making it easy to create rolls in which the step size varies during the roll.
Settings: StartStep: 001~999, EndStep: 001~999
Note Determines the specific note (or instrument in Drum voices) for the roll effect. You can also set the note directly from
the Keyboard, by holding down the [INFORMATION] button and pressing the desired key (page 53).
Settings: C-2~G8
StartVelo (Starting Velocity)
EndVelo (Ending Velocity) Determines the velocity of the notes in the roll. Both the starting and ending velocity values can be specified, making
it easy to create rolls in which the velocity increases or decreases. This lets you create rolls that gradually increase or
decrease in volume (crescendo/decrescendo) — a technique often used in dance music.
Settings: StartVelo: 001~127, EndVelo: 001~127
08: Sort Chord This Job sorts chord events (simultaneous note events) by order of pitch. The sort affects the order of the notes in
the Event List display (page 124), but does not change the timing of the notes. When used to pre-process chords
before using the Separate Chord Job (below), Chord Sort can be used to simulate the “stroke” or strumming sound
of guitars and similar instruments.
228

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yamaha MOTIF ES7 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yamaha MOTIF ES7 in de taal/talen: Engels als bijlage per email.

De handleiding is 8,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Yamaha MOTIF ES7

Yamaha MOTIF ES7 Gebruiksaanwijzing - Nederlands - 300 pagina's

Yamaha MOTIF ES7 Installatiehandleiding - Deutsch - 35 pagina's

Yamaha MOTIF ES7 Gebruiksaanwijzing - Deutsch - 300 pagina's

Yamaha MOTIF ES7 Installatiehandleiding - English - 35 pagina's

Yamaha MOTIF ES7 Gebruiksaanwijzing - Français - 300 pagina's

Yamaha MOTIF ES7 Installatiehandleiding - Français - 35 pagina's

Yamaha MOTIF ES7 Gebruiksaanwijzing - Italiano - 308 pagina's

Yamaha MOTIF ES7 Installatiehandleiding - Italiano - 12 pagina's

Yamaha MOTIF ES7 Gebruiksaanwijzing - Português - 300 pagina's

Yamaha MOTIF ES7 Gebruiksaanwijzing - Espanõl - 297 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info