571272
177
Verklein
Vergroot
Pagina terug
1/300
Pagina verder
Internal Structure (System Overview)
177
Owner’s Manual
Basic Structure
Effect Block
This block applies effects to the output of the tone generator
block, processing and enhancing the sound using
sophisticated DSP (digital signal processing) technology.
Effect structure
The effect processing of this synthesizer features the System
Effects, Insertion Effects, Master Effect, Part EQ (Equalizer),
and Master EQ (Equalizer).
System Effects (Reverb, Chorus)
System Effects are applied to the overall sound, whether it be
a Voice, an entire Performance, a Song, etc.
With System effects, the sound of each Part is sent to the
effect according to the effect Send Level for each Part. The
processed sound (referred to as “wet”) is sent back to the
mixer, according to the Return Level, and output – after being
mixed with the unprocessed “dry” sound. This arrangement
lets you prepare an optimum balance of the effect sound and
the original sound of the Parts.
Reverb
The Reverb effects add a warm ambience to the sound,
simulating the complex reflections of actual performance
spaces, such as a concert hall or a small club. A total of 20
different Reverb types are available.
Chorus
The Chorus effects use various types of modulation
processing, including flanger and phaser, to enhance the
sound in a variety of ways. A total of 49 types are available,
including reverb and delay effects.
nAbout the System Effect related display in each mode, see pages 179
and 180.
Insertion Effects A, B
Insertion effects can be applied individually to each part.
Insertion effects are mainly used to directly process a single
part. The depth of the effect is adjusted by setting the dry/wet
balance. Since an Insertion effect can only be applied to one
particular part, it should be used for sounds you want to
drastically change or for sounds that use an effect unintended
for other sounds. You can also set the balance so that only the
effect sound is heard, by setting Wet to 100%.
This synthesizer features eight sets of Insertion effects (one
set has A and B units). They can be applied to all parts of the
Performance, and applied to eight parts (maximum) of the
Song/Pattern.
A total of 116 different Chorus types are available.
nIn the Voice mode, only one set of the Insertion effects is available.
nFor details on the displays related to the Insertion effects in each
mode, see pages 179 and 180.
nAmong the AUDIO IN parts, Insertion effects cannot be applied to the
mLAN parts and AIEB2 parts.
Plug-in Insertion Effects
This is a special effect system, only available when an effect-
type Plug-in Board is installed. Plug-in Board effects are not
available in the Voice mode.
nFor details on the displays related to the Plug-in Insertion effects in
each mode, see pages 179 and 180.
Master Effect
This block applies effects to the final stereo output signal of
the entire sound. A total of 8 different Master Effect types are
available.
nFor details on the displays related to the Master effects in each mode,
see pages 179 and 180.
EFFECT Buttons
Three EFFECT buttons on the panel let you switch each
effect block on and off.
Press the [INSERTION] button below “BYPASS” so that
the lamp lights to turn the Insertion effects off. You can
specify which Insertion effects (only the internal
Insertion effect, only the Plug-in Insertion effect, or both
of them) are bypassed from the [UTILITY] [F1]
GENERAL [SF3] EF BYPS display in the Utility mode.
Press the [SYSTEM] button below “BYPASS” so that the
lamp lights to turn the System effects off. You can
specify which System effects (only the Reverb effect,
only the Chorus effect, or both of them) are bypassed
from the [UTILITY] [F1] GENERAL [SF3] EF BYPS
display in the Utility mode.
Press the [MASTER EFFECT] button so that the lamp
lights to turn the Master effect on. Keep in mind that
pressing and holding this button calls up the Master
effect setup display in the current mode.
Controlling the Master effect by using the Knobs
When pressing the [ARP FX] button and the [EQ] button
simultaneously (both lamps light), you can control the
Knobs to adjust the Master effect related parameters
specified in the [UTILITY] [F4] CTL ASN [SF5]
MEF display of the Utility mode.
BYPASS
INSERTION SYSTEM MASTER
EFFECT
EFFECT
177

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yamaha MOTIF ES7 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yamaha MOTIF ES7 in de taal/talen: Engels als bijlage per email.

De handleiding is 8,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Yamaha MOTIF ES7

Yamaha MOTIF ES7 Gebruiksaanwijzing - Nederlands - 300 pagina's

Yamaha MOTIF ES7 Installatiehandleiding - Deutsch - 35 pagina's

Yamaha MOTIF ES7 Gebruiksaanwijzing - Deutsch - 300 pagina's

Yamaha MOTIF ES7 Installatiehandleiding - English - 35 pagina's

Yamaha MOTIF ES7 Gebruiksaanwijzing - Français - 300 pagina's

Yamaha MOTIF ES7 Installatiehandleiding - Français - 35 pagina's

Yamaha MOTIF ES7 Gebruiksaanwijzing - Italiano - 308 pagina's

Yamaha MOTIF ES7 Installatiehandleiding - Italiano - 12 pagina's

Yamaha MOTIF ES7 Gebruiksaanwijzing - Português - 300 pagina's

Yamaha MOTIF ES7 Gebruiksaanwijzing - Espanõl - 297 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info