571272
119
Verklein
Vergroot
Pagina terug
1/300
Pagina verder
Quick Guide — Advanced Course
Creating a Song on the MOTIF ES
119
Owner’s Manual
Re-recording a specific part of a Song (Punch In/Out)
Use the Punch In/Out recording method to record over only a
specific portion of the track. In the example instructions
below, you’ll see how to re-record measures three through five
of an already recorded Song.
Set the Type parameter to “punch” and specify the area to be
re-recorded.
Set other parameters as necessary. See page 222 for details.
nPunch In/Out recording is available only in the Song Record mode.
This is not available in the Pattern Record mode.
Recording additional notes to an already-
recorded track (Overdub)
Use the Overdub recording method when you want to add
more data to a track that already contains data. This is useful
not only for recording more notes to a track; it’s also
convenient for adding non-note, sound-shaping data, such as
that of the Knobs and Ribbon Controller.
Set the Type parameter to “overdub.”
Set other parameters as necessary. See page 222 for details.
Playback starts, and the notes (or controller data) you play
are added to the existing data.
1
In the Song Play mode, select a Song to be created.
2Press the [] (Record) button to enter the Song
Record mode.
3Press the [TRACK SELECT] button (the lamp
lights), then select the desired track from the
number buttons [1] - [16].
4Set the parameters related to recording in the
[F1] SETUP display.
5Press the [F] (Play) button to start recording.
6Press the [] (Stop) button to stop recording
after the Song playback reaches the Punch Out
point.
7Press the [F] (Play) button to hear the part
you’ve just re-recorded.
Punch In (Recording start measure : beat)
Playback of the recording track is turned off from this point, and
your keyboard performance will be recorded to the track. Location setting
(page 58)
Punch Out (Recording end measure : beat)
Recording ends at this point and normal playback of the
recording track starts.
Press the [SF1] COPY LOC to assign the measure numbers registered to
the Locations (Loc1 and Loc2) to the Punch In and Punch Out points.
SEQ TRANSPORT
LOCATE 1 2
When Song playback
reaches the Punch In
point, play the keyboard.
Playback start
8Save the created Song data to a SmartMedia/USB
storage device (page 132) before turning the
power off.
1In the Song Play mode, select a song to be
created.
2Press the [] (Record) button to enter the Song
Record mode.
3Press the [TRACK SELECT] button (the lamp
lights), then select the desired track from the
number buttons [1] - [16].
4Set the parameters related to recording in the
[F1] SETUP display.
5Press the [F] (Play) button to start recording.
6Press the [] (Stop) button to stop recording
after the Song playback reaches the Punch Out
point.
7Press the [F] (Play) button to hear the part
you’ve just re-recorded.
8Save the created Song data to a SmartMedia/USB
storage device (page 132) before turning the
power off.
119

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yamaha MOTIF ES7 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yamaha MOTIF ES7 in de taal/talen: Engels als bijlage per email.

De handleiding is 8,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Yamaha MOTIF ES7

Yamaha MOTIF ES7 Gebruiksaanwijzing - Nederlands - 300 pagina's

Yamaha MOTIF ES7 Installatiehandleiding - Deutsch - 35 pagina's

Yamaha MOTIF ES7 Gebruiksaanwijzing - Deutsch - 300 pagina's

Yamaha MOTIF ES7 Installatiehandleiding - English - 35 pagina's

Yamaha MOTIF ES7 Gebruiksaanwijzing - Français - 300 pagina's

Yamaha MOTIF ES7 Installatiehandleiding - Français - 35 pagina's

Yamaha MOTIF ES7 Gebruiksaanwijzing - Italiano - 308 pagina's

Yamaha MOTIF ES7 Installatiehandleiding - Italiano - 12 pagina's

Yamaha MOTIF ES7 Gebruiksaanwijzing - Português - 300 pagina's

Yamaha MOTIF ES7 Gebruiksaanwijzing - Espanõl - 297 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info