571272
92
Verklein
Vergroot
Pagina terug
1/300
Pagina verder
Editing a Performance
92 Owner’s Manual
Quick Guide — Advanced Course
After the Performance has been stored, a “Completed” message
appears and operation returns to the Performance Play display.
Keep in mind that the Store operation may take a short time to complete,
during which an “Executing.. or “Please keep power on” message may be
shown. Never attempt to turn off the power while data is being written to
Flash ROM while such a message is displayed. Turning the power off in this
state results in loss of all user data and may cause the system to freeze (due
to corruption of data in the Flash ROM). This may also result in the MOTIF ES
being unable to properly start up the next time the power is turned on.
If you select another Performance without storing, the currently edited
Performance will be lost. Make sure to store the edited Performance before
selecting another Performance.
Saving the edited Performances to a
SmartMedia/USB storage device
Whether you are saving data to SmartMedia or a USB storage
device, the procedure is the same. Insert a SmartMedia card
(to the CARD slot) or connect the USB device and follow the
instructions below.
Refer to “Basic settings for using SmartMedia or a USB
storage device” on page 30.
Move the cursor to TYPE, then select a file type by using the
data dial, [INC/YES] and [DEC/NO] buttons. When Type is set
to “All,” execute the Save operation to save all the created
data, including the Performances as well as the Voices
assigned to them, as a single file (extension: W7A).
Move the cursor to the file name input location, then input a
file name. For detailed instructions on naming, refer to page
53 in the Basic Operation section.
If you are about to overwrite an existing file, the display
prompts you for confirmation. Press the [INC/YES] button to
execute the Save operation to overwrite the existing file, or
press the [DEC/NO] button to cancel it.
While the data is being saved, make sure to follow these precautions:
•Never remove or eject the media from the device (SmartMedia or USB
storage).
•Never unplug or disconnect any of the devices.
•Never turn off the power of the MOTIF ES or the relevant devices.
Loading the Performance data from the
SmartMedia/USB storage device
In the previous section, we saved Performance data as an
“All” file (extension: W7A) to a SmartMedia card or USB
storage device. Here, we’ll recall that Performance data and
load it to the instrument with the Load operation.
Refer to “Basic settings for using SmartMedia or a USB
storage device” on page 30.
4Press the [INC/YES] button to execute the Store
operation.
[FILE] [F2] SAVE
1Press the [FILE] button to enter the File mode,
then execute the basic settings.
2Press the [F2] SAVE button to call up the Save
display.
3Set the Type parameter to “All.”
EXIT ENTER
EXECUTE
DEC/NO INC/YES
CAUTION
CAUTION
4Input a file name.
5Press the [ENTER] button to execute the Save
operation.
[FILE] [F3] LOAD
1Press the [FILE] button to enter the File mode,
then execute the basic settings.
2Press the [F3] LOAD button to call up the Load
display.
File name
EXIT ENTER
EXECUTE
DEC/NO INC/YES
CAUTION
92

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yamaha MOTIF ES7 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yamaha MOTIF ES7 in de taal/talen: Engels als bijlage per email.

De handleiding is 8,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Yamaha MOTIF ES7

Yamaha MOTIF ES7 Gebruiksaanwijzing - Nederlands - 300 pagina's

Yamaha MOTIF ES7 Installatiehandleiding - Deutsch - 35 pagina's

Yamaha MOTIF ES7 Gebruiksaanwijzing - Deutsch - 300 pagina's

Yamaha MOTIF ES7 Installatiehandleiding - English - 35 pagina's

Yamaha MOTIF ES7 Gebruiksaanwijzing - Français - 300 pagina's

Yamaha MOTIF ES7 Installatiehandleiding - Français - 35 pagina's

Yamaha MOTIF ES7 Gebruiksaanwijzing - Italiano - 308 pagina's

Yamaha MOTIF ES7 Installatiehandleiding - Italiano - 12 pagina's

Yamaha MOTIF ES7 Gebruiksaanwijzing - Português - 300 pagina's

Yamaha MOTIF ES7 Gebruiksaanwijzing - Espanõl - 297 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info