530341
115
Verklein
Vergroot
Pagina terug
1/240
Pagina verder
Quick GuideConnecting the MO to external devices
Using the MO with computer software
115
Owner’s Manual
Using the Remote Control functions
The REMOTE display appears, and the panel controls are enabled for Remote operation of the computer software (their
normal functions are disabled).
n Press this button again to exit from the Remote Control mode.
Change the Mode by simultaneously holding down the [F6] SHIFT button and pressing the [DAW REMOTE] button.
The following explains which sequencer functions are assigned to which panel controls in the remote control.
n For details about how to operate the Editor, refer to the PDF manual included with the Editor.
[J], [F], [I], [ IE], [G], [H] buttons
The six MODE buttons are used as transport controls, letting you start/stop playback of the DAW software on the computer.
[EDIT], [JOB], and [STORE] buttons
[ARPEGGIO ON/OFF] button
1
To enter the Remote Control mode, press the [DAW REMOTE] button (the lamp flashes).
2
Select the software to be remote-controlled (Mode A or Mode B).
3
Use the Knobs and buttons on the MO to remotely control the software.
When the Mode is set to “General”
or “Cubase”
Not used.
When the Mode is set to “Logic” These buttons perform the same functions as those of the [OPTION], [CONTROL] and [ALT] buttons on the Logic
Control.
When the Mode is set to “SONAR” These buttons perform the same functions as those of the [M2], [M3] and [M4] buttons on the Mackie Control.
When the Mode is set to “D.Perf These buttons perform the same functions as those of the [OPTION], [CONTROL] and [COMMAND] buttons on the
Mackie Control.
When the Mode is set to “General”
or “Cubase”
Not used.
When the Mode is set to “Logic” The button can be used to switch the whether the track/slot number of DAW is displayed on the LCD or not.
When the Mode is set to “SONAR” The button can be used to switch the whether the track/slot number of DAW is displayed on the LCD or not.
When the Mode is set to “D.Perf The button can be used to switch the whether the send/effect number of DAW is displayed on the LCD or not.
DAW
REMOTE
FILE UTILITY
DEMO
F6
DAW
REMOTE
Mode A Mode B
PAN SEND
TONE
ARP FX
EQ
ASSIGN
MEF
These dark bars serve as the cursor, indicating the
track/part currently being edited by the Knob.
Moving the slider automatically moves the cursor to
the corresponding track/part.
Press the Control function button to
change the functions assigned to the
[F1] – [F6] and [SF1] – [SF5] buttons
(shown at the bottom of the display).
Refer to the separate Data List.
Upper row indicates the setting
values for knobs/sliders 1 – 4 on
the DAW controller.
Bottom row indicates the setting
values for knobs/sliders 5 – 8 on
the DAW controller.
The functions of the buttons on each DAW controller are assigned to
the [F1] – [F6] and [SF1] – [SF5] button on the MO. The functions to
be assigned depend on the software selected in the Mode A or B.
For details, refer to the “Remote Control Assignments” on page 117.
115

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yamaha MO8 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yamaha MO8 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,36 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Yamaha MO8

Yamaha MO8 Gebruiksaanwijzing - Deutsch - 239 pagina's

Yamaha MO8 Gebruiksaanwijzing - Français - 239 pagina's

Yamaha MO8 Gebruiksaanwijzing - Português - 240 pagina's

Yamaha MO8 Gebruiksaanwijzing - Espanõl - 240 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info