530341
106
Verklein
Vergroot
Pagina terug
1/240
Pagina verder
Quick Guide Connecting the MO to external devices
Connections
106
Owner’s Manual
Controlling another MIDI instrument via MIDI THRU
If you have more synthesizers and tone generators than MIDI ports, you can use the MIDI THRU jack to connect and control
additional devices. Here, the playback data of a MIDI sequencer is used to play the sounds of another MIDI instrument
(connected to the MIDI THRU connector) as well as the MO. The MIDI THRU connector simply redirects any received MIDI
data (via MIDI IN) to connected instrument.
In this case, make sure that the MO is set to the Song mode or Pattern mode. If the instrument is set to the Voice mode or to
a Performance mode setting in which multi-channel MIDI messages are not recognized, the external sequence data
(containing multi-channel data) will not play back properly on the MO. In addition, you may have to make certain MIDI
synchronization settings (see below). Likewise, make sure to set the MIDI tone generator (connected to the MIDI THRU
connector) to the multi-timbral mode.
In addition, you need to set the MIDI synchronization related parameters of the MO to enable external clock from the
following display.
Connecting to an MTR (Multi Track Recorder)
Since this synthesizer can receive the MTC (MIDI Time Code) and can transmit the MMC (MIDI Machine Control), you can
produce music by synchronizing to a MTC- or MMC-compatible multi-track.
You can use two types of MTR control (illustrated below) by setting the MIDI Sync to MTC in the Utility mode, with the
following operation.
n MTC and MMC are available only in the Song mode.
Synchronizing the MO to the MTC signal from an external MTR
After receiving the MTC signal transmitted from the MTR (when MTR playback is started), the selected Song of the MO will
start, once the MTC Start Offset time elapses (set from the display [UTILITY] [F5] MIDI [SF3] SYNC MTC StartOffset
in the Utility mode).
n MTC (MIDI Time Code) allows simultaneous synchronization of multiple audio devices via standard MIDI cables. It includes data corresponding to
hours, minutes, seconds, and frames. The MO does not transmit MTC. An instrument such as the Yamaha AW2400 is necessary as an MTC master.
[UTILITY] [F5] MIDI [SF3] SYNC MIDI Sync = MIDI
Splitting the sound between the MO and an external tone generator by MIDI channel (Part 2)
In this connection example shown above, you can split the sequence playback between the MO and another instrument connected to
MIDI THRU and have them sound different parts.
For example, on the MO assign the Song/Pattern parts to MIDI Receive Channels 1 through 9 with the following operation, and set the
rest of the parts (not to be sounded) to off.
On the connected MIDI tone generator, assign the parts to be sounded to MIDI Receive Channels 10 through 16, and set the rest of
the parts (not to be sounded) to off.
[UTILITY] [F5] MIDI [SF3] SYNC MIDI Sync = MTC
MIDI OUT
MIDI THRUMIDI IN
MIDI OUTMIDI IN MIDI IN
C
MO
MIDI tone generator
MIDI synthesizer
MIDI sequencer such as
the QY/QX series,
RM1x, RS7000
TIP
[SONG] or [PATTERN] [MIXING] [EDIT] Part selection [F1] VOICE [SF2] MODE ReceiveCh
MIDI IN
MTC OUT
MO
MIDI cable
AW2400, etc.
106

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yamaha MO8 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yamaha MO8 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,36 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Yamaha MO8

Yamaha MO8 Gebruiksaanwijzing - Deutsch - 239 pagina's

Yamaha MO8 Gebruiksaanwijzing - Français - 239 pagina's

Yamaha MO8 Gebruiksaanwijzing - Português - 240 pagina's

Yamaha MO8 Gebruiksaanwijzing - Espanõl - 240 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info