Tape 1 or tape 2 playback
1 Press the TAPE 1/2 input selector button.
2 Open the deck 1 or deck 2 cassette compartment by
pressing the EJECT button.
3 Load a tape into the deck 1 or deck 2 cassette
compartment, and close the lid panel completely by
pressing the panel until it clicks.
* If you have loaded two tapes into both the cassette
compartments, select either the tape 1 or tape 2 which
you want to play back by pressing the TAPE 1/2 input
selector button on the front panel or the TAPE 1/2
button on the remote control transmitter confirming it on
the display.
4 Use the Dolby NR system by pressing the DOLBY NR
button so that “ B” lights up on the display, if the tape
has been recorded with Dolby noise reduction. If not so,
set the DOLBY NR button so that “ B” does not light up.
* For details, refer to the “Dolby B Type Noise
Reduction” on page 31.
5 If necessary, switch the reverse mode to the desired one
by pressing the reverse MODE selector button so that the
corresponding indicator lights up.
The reverse MODE selector button can be operated before
or during playback, and changes tape playback as follows:
6 Press the play button on the remote control transmitter
to listen to side A, or the play button for side B.
* When using the play button on the front panel:
Pressing the button once begins playback in the
direction currently selected. Pressing the play button
once more changes the tape running direction
and begins playback.
* The play direction indicator on the display shows the
currently selected tape direction.
To stop playback
Press the stop button.
TAPE DECK OPERATION
2 6 2
4 5 1, 3
3
