35
Storing your own programs
Your favorite pair of any equalizer mode (or an equalizer
pattern of your own adjusting) and any sound field mode can
be stored as a user program. Up to 4 pairs can be stored as
desired.
To store
1 Select a desired equalizer mode by pressing the MUSIC
button.
* If desired, adjust the equalizer as you prefer by using
the equalizer control buttons.
2 Select a desired sound field mode by pressing the
LOCATION button.
3 Press the user program MEMORY button.
* “1” will flash on the user program number indicator and
the MEMORY indicator will flash for about 5 seconds.
4 Select the user program number (1, 2, 3 or 4) to which
you will store the selected modes by pressing the USER
button once or more before “1” stops flashing.
* Whenever you press the USER button, the user
program number changes and is displayed as follows.
5 Press the user program MEMORY button before the
number selected in step 4 stops flashing.
* In the same way, store other pairs to other three user
positions.
* It is also a good idea to store only an equalizer pattern of
your own adjusting (without storing any sound field mode).
Notes
• A new program can be stored in place of the former one.
• In step 4 or 5, if the user program number indicator stops
flashing before operation, return to step 3.
To recall a user program
11 Playback a source. (For source playback, refer to the
sections beginning on page 10.)
22 Press the USER button once or more so that the user
program number you want to recall lights up.
* Whenever you press the USER button, the user
program number changes and is displayed as follows.
GRAPHIC EQUALIZER/SOUND FIELD PROCESSOR CONTROL
