29
English
1
Set to the “
∞
” position.
2 Turn the power on.
3
Set to the “0” position.
4
Set to the “OFF ( )”.
5 Set the PARAMETER/SET MENU switch on the
remote control transmitter to the PARAMETER
position.
6 Press the TEST key on the remote control transmitter
so that “TEST DOLBY SUR.” appears on the display to
enter test mode.
This procedure lets you adjust the sound output level balance between the main, center rear and front effect speakers using the
built-in test tone generator. When this adjustment is performed, the sound output level heard at the listening position will be the
same from each speaker. This is important for the best performance of the digital sound field processor, the Dolby Digital (AC-3)
decoder, the Dolby Pro Logic Surround decoder and the DTS decoder.
The adjustment of each speaker output level should be done at your listening position with the remote control transmitter.
Otherwise, the result may not be satisfactory.
Note: Be sure to use the remote control transmitter with the lid open.
