571129
116
Verklein
Vergroot
Pagina terug
1/142
Pagina verder
116 DGX-620/520, YPG-625/525 Owner’s Manual
Keyboard Stand Assembly
The parts shown in the “Assembly Parts” illustration will be used. Follow the assembly instructions and
select the parts as needed.
z Attach the stand bases.
Making sure that the boards are facing the proper direc-
tion (the holes should face inside). The left and right side
boards for the DGX-520 and YPG-525 are the same shape.
Insert the joint connectors w into the holes as shown. The
joint connectors have been installed properly if you can see
a plus mark on the connector.
Attach the stand bases to the rear of the side boards,
using the 6 x 70 mm roundhead screws q. The left and
right stand bases are the same shape, and there is no differ-
ence between their front-to-back orientation. If you have
trouble screwing in the screws, use a screwdriver to rotate
the joint connectors to the appropriate position—the
mark on the joint connectors indicates the location of the
screw hole.
Have a phillips-head (+) screwdriver ready.
Read these cautions carefully before you assemble or use the keyboard stand.
These cautions are to promote safe use of the stand and to prevent injury and damage from
occurring to you and others. By following these cautions carefully, your keyboard stand will pro-
vide you with safe and prolonged use.
Be careful not to confuse parts, and be sure to install all parts in the correct direction. Please assemble in
accordance with the sequence given below.
Assembly should be carried out by at least two persons.
Be sure to use the correct screw size, as indicated above. Use of incorrect screws can cause damage.
Use the stand after assembly is complete. An uncompleted stand may overturn or the keyboard may drop.
•Always place the stand on a flat, stable surface. Placing the stand on uneven surfaces may cause it to
become unstable or overturn, the keyboard to drop, or injury.
Do not use the stand for anything other than its designed purpose. Placing other objects on the stand may
result in the object dropping or the stand overturning.
Do not apply excessive force to the keyboard as it may cause the stand to overturn or the keyboard to
drop.
Make sure the stand is sturdy and safe, and all screws have been tight and firm before use. If not, the
stand may overturn, the keyboard may drop, or may result in injury to the user.
•To disassemble, reverse the assembly sequence given below.
CAUTION
q 6 x 70 mm roundhead
screws (4 pcs.)
Side
boards
Stand
bases
Back board
w Joint connectors (4 pcs.)
e 6 x 30 mm roundhead
screws (4 pcs.)
r 5 x 16 mm roundhead
screws (4 pcs.)
Assembly Parts
t Support rail
y 4 x 45 mm flathead screws
(6 pcs.)
(DGX-620/YPG-625 only)
(DGX-620/YPG-625 only)
1
w Joint connectors
q 6 x 70 mm
roundhead screws
116

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yamaha DGX-620 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yamaha DGX-620 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,02 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Yamaha DGX-620

Yamaha DGX-620 Gebruiksaanwijzing - Nederlands - 142 pagina's

Yamaha DGX-620 Gebruiksaanwijzing - Deutsch - 148 pagina's

Yamaha DGX-620 Gebruiksaanwijzing - Français - 148 pagina's

Yamaha DGX-620 Gebruiksaanwijzing - Italiano - 189 pagina's

Yamaha DGX-620 Gebruiksaanwijzing - Português - 142 pagina's

Yamaha DGX-620 Gebruiksaanwijzing - Espanõl - 148 pagina's

Yamaha DGX-620 Gebruiksaanwijzing - Polski - 142 pagina's

Yamaha DGX-620 Gebruiksaanwijzing - Dansk - 142 pagina's

Yamaha DGX-620 Gebruiksaanwijzing - Svenska - 142 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info