594735
12
Verklein
Vergroot
Pagina terug
1/138
Pagina verder
CVP-509 / 505 / 503 / 501
Owner's Manual
DIC231
Thank you for purchasing this Yamaha Clavinova!
We recommend that you read this manual carefully so that you can fully take advantage of the advanced
and convenient functions of the instrument.
We also recommend that you keep this manual in a safe and handy place for future reference.
Before using the instrument, be sure to read “PRECAUTIONS” on pages 6-7.
EN
Yamaha Home Keyboards Home Page
http://music.yamaha.com/homekeyboard/
Yamaha Manual Library
http://www.yamaha.co.jp/manual/
IMPORTANT —Check your power supply—
Make sure that your local AC mains voltage matches the voltage specified on the name plate on the
bottom panel. In some areas a voltage selector may be provided on the bottom panel of the main
keyboard unit near the power cord. Make sure that the voltage selector is set for the voltage in your area.
The voltage selector is set at 240V when the unit is initially shipped. To change the setting use a "minus"
screwdriver to rotate the selector dial so that the correct voltage appears next to the pointer on the panel.
For information on assembling the keyboard stand, refer to the instructions at the end of this manual.
Owner's Manual
CVP-509/505/503/501
U.R.G., Digital Musical Instruments Division
© 2009-2011 Yamaha Corporation
WR05330 109MWAP*.*-**E0
Printed in China
2 CVP-509/505/503/501 Owner’s Manual
SPECIAL MESSAGE SECTION
PRODUCT SAFETY MARKINGS: Yamaha electronic
products may have either labels similar to the graphics
shown below or molded/stamped facsimiles of these graph-
ics on the enclosure. The explanation of these graphics
appears on this page. Please observe all cautions indicated
on this page and those indicated in the safety instruction
section.
See bottom of Keyboard enclosure for graphic symbol markings.
The exclamation point within the equi-
lateral triangle is intended to alert the
user to the presence of important operat-
ing and maintenance (servicing) instruc-
tions in the literature accompanying the
product.
The lightning flash with arrowhead sym-
bol, within the equilateral triangle, is
intended to alert the user to the presence
of uninsulated “dangerous voltage”
within the product’s enclosure that may
be of sufficient magnitude to constitute a
risk of electrical shock.
IMPORTANT NOTICE: All Yamaha electronic products
are tested and approved by an independent safety testing
laboratory in order that you may be sure that when it is
properly installed and used in its normal and customary
manner, all foreseeable risks have been eliminated. DO
NOT modify this unit or commission others to do so unless
specifically authorized by Yamaha. Product performance
and/or safety standards may be diminished. Claims filed
under the expressed warranty may be denied if the unit is/
has been modified. Implied warranties may also be affected.
SPECIFICATIONS SUBJECT TO CHANGE: The
information contained in this manual is believed to be cor-
rect at the time of printing. However, Yamaha reserves the
right to change or modify any of the specifications without
notice or obligation to update existing units.
ENVIRONMENTAL ISSUES: Yamaha strives to produce
products that are both user safe and environmentally
friendly. We sincerely believe that our products and the pro-
duction methods used to produce them, meet these goals. In
keeping with both the letter and the spirit of the law, we
want you to be aware of the following:
Battery Notice: This product MAY contain a small non-
rechargeable battery which (if applicable) is soldered in
place. The average life span of this type of battery is
approximately five years. When replacement becomes nec-
essary, contact a qualified service representative to perform
the replacement.
Warning: Do not attempt to recharge, disassemble, or
incinerate this type of battery. Keep all batteries away from
children. Dispose of used batteries promptly and as regu-
lated by applicable laws. Note: In some areas, the servicer is
required by law to return the defective parts. However, you
do have the option of having the servicer dispose of these
parts for you.
Disposal Notice: Should this product become damaged
beyond repair, or for some reason its useful life is consid-
ered to be at an end, please observe all local, state, and fed-
eral regulations that relate to the disposal of products that
contain lead, batteries, plastics, etc.
NOTICE: Service charges incurred due to lack of knowl-
edge relating to how a function or effect works (when the
unit is operating as designed) are not covered by the manu-
facturer’s warranty, and are therefore the owners responsi-
bility. Please study this manual carefully and consult your
dealer before requesting service.
NAME PLATE LOCATION: The graphic below indicates
the location of the name plate. The model number, serial
number, power requirements, etc., are located on this plate.
You should record the model number, serial number, and the
date of purchase in the spaces provided below and retain
this manual as a permanent record of your purchase.
Model
Serial No.
Purchase Date
92-469- (bottom)
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CVP-509/505/503/501 Owner’s Manual 3
The above warning is located on the bottom of the unit.
Explanation of Graphical Symbols
The lightning flash with arrowhead symbol
within an equilateral triangle is intended to alert
the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.
IMPORTANT SAFETY INSTRUCTIONS
1 Read these instructions.
2Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8 Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9 Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10 Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11 Only use attachments/accessories specified by the
manufacturer.
12 Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer, or sold with
the apparatus. When a cart is
used, use caution when moving
the cart/apparatus combination
to avoid injury from tip-over.
13 Unplug this apparatus during
lightning storms or when unused for long periods of
time.
14 Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally,
or has been dropped.
(UL60065_03)
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
Information for Users on Collection and Disposal of Old Equipment
This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic
products should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in
accordance with your national legislation and the Directives 2002/96/EC.
By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative
effects on human health and the environment which could otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old products, please contact your local municipality, your waste
disposal service or the point of sale where you purchased the items.
[For business users in the European Union]
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.
[Information on Disposal in other Countries outside the European Union]
This symbol is only valid in the European Union. If you wish to discard these items, please contact your local
authorities or dealer and ask for the correct method of disposal.
4 CVP-509/505/503/501 Owner’s Manual
Welcome to Clavinova
True Acoustic Piano Feel Chapter 1 Perform the piano songs by Clavinova
The Sound of Full Concert Grand Piano – Pure CF Sampling
This instrument features samples from Yamaha's most renowned full concert grand piano, the CFIIIS, and
employs meticulous processing and adjustment of each sample to achieve an extraordinarily realistic grand
piano sound. You can conveniently call this up by a single panel button press. Enjoy the exceptionally
expressive and delicate sound, with full, natural dynamic range.
Authentic Acoustic Piano-like Touch
Just as on an actual grand piano, the lower keys are heavy in touch and the higher keys are light, with all the
natural gradations in between. The CVP-509/505/503 provide the performance functions and expressive
power found only on grand pianos, such as having repeated plays of the same note perfectly articulated, even
when playing at high speed or with partial key release.
The Acoustic Ambience of a Grand Piano—with the iAFC
Feature (only CVP-509) ................page 34
By setting the iAFC (Instrumental Active Field Control) effect
properly, you can enjoy the sound expand around you—as if you’re
playing on stage in a concert hall—providing a remarkably natural
sound heretofore only found on acoustic instruments, and an overall
sound which is deeper and more resonant through use of the damper
pedal.
Play a Wide Variety of Instrument Voices Chapter 2 Voices
The instrument gives you not only various realistic piano Voices, but
also features an exceptionally wide variety of authentic instruments,
both acoustic and electronic.
Perform Along with a Backing Band
Chapter 3 Styles
Playing a chord with your left hand automatically plays the auto
accompaniment backing (Style function). Select an accompaniment
style — such as pop, jazz, Latin, and various other music genres in
the world — and let the instrument be your backing band!
CVP-509/505/503/501 Owner’s Manual 5
Playing Back Songs ................page 59
Play along with a Song data, and fill out your solo performance with the sounds of an entire band or orchestra.
Enjoy a wide variety of songs — commercially available music data or preset songs.
Guide function ................page 64
The key guide lamps are also helpful in learning and practicing, since they indicate
the notes you should play, when you should play them, and how long you should
hold them down.
Displaying Music Score ................page 62
While playing back a Song, you can have the music score (notation) automatically
shown on the display — an exceptionally convenient tool for learning and practicing
pieces.
Recording Your Performance ................page 66
The instrument lets you easily record your own performance and save it to internal
memory or a USB flash memory. The instrument also lets you listen back to your
performance, and further edit it or utilize it for your
music production.
Call Up the Ideal Voice and Style for Each Song
Chapter 5 Music Finder
By using the convenient Music Finder function, you can call up the ideal panel settings including the most
suitable Voice, Style, effects, etc. for each song. By registering the Song/audio data saved in various places
into Music Finder, the instrument can call up song data easily from the song title. Moreover, the Music Finder
Plus function gives you the capability, by connecting the instrument to the Internet, of searching for and adding
desired panel settings and song data via the Internet to the instrument.
Audio Playing and Recording from USB Flash Memory (CVP-509/505/503)
Chapter 7 USB Audi
o
Audio files (WAV or MP3*) stored to USB flash memory can be
played back on the instrument.
Moreover, you can record your performance as audio data to a USB
flash memory device.
Connect a microphone to the instrument and enjoy recording your
singing along with the keyboard performance.
* The MP3 format is supported only by the CVP-509/505.
Connect Directly to the Internet Chapter 9 Internet Direct Connection
The instrument also connects directly to the Internet, letting you
download Song and Style data from special websites, and save
them to internal memory or a USB storage device.
Play Along with Song Data Chapter 4 Songs
6 CVP-509/505/503/501 Owner’s Manual
(1)B-13 1/2
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
* Please keep this manual in a safe place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from
electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to,
the following:
Only use the voltage specified as correct for the instrument. The required
voltage is printed on the name plate of the instrument.
Check the electric plug periodically and remove any dirt or dust which may
have accumulated on it.
Use only the supplied power cord/plug.
Do not place the power cord near heat sources such as heaters or radiators,
and do not excessively bend or otherwise damage the cord, place heavy
objects on it, or place it in a position where anyone could walk on, trip over, or
roll anything over it.
Do not open the instrument or attempt to disassemble the internal parts or
modify them in any way. The instrument contains no user-serviceable parts. If
it should appear to be malfunctioning, discontinue use immediately and have it
inspected by qualified Yamaha service personnel.
Do not expose the instrument to rain, use it near water or in damp or wet
conditions, or place containers on it containing liquids which might spill into
any openings. If any liquid such as water seeps into the instrument, turn off the
power immediately and unplug the power cord from the AC outlet. Then have
the instrument inspected by qualified Yamaha service personnel.
Never insert or remove an electric plug with wet hands.
Do not put burning items, such as candles, on the unit.
A burning item may fall over and cause a fire.
If the power cord or plug becomes frayed or damaged, or if there is a sudden
loss of sound during use of the instrument, or if any unusual smells or smoke
should appear to be caused by it, immediately turn off the power switch,
disconnect the electric plug from the outlet, and have the instrument inspected
by qualified Yamaha service personnel.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage
to the instrument or other property. These precautions include, but are not limited to, the following:
When removing the electric plug from the instrument or an outlet, always hold
the plug itself and not the cord. Pulling by the cord can damage it.
Remove the electric plug from the outlet when the instrument is not to be used
for extended periods of time, or during electrical storms.
Do not connect the instrument to an electrical outlet using a multiple-
connector. Doing so can result in lower sound quality, or possibly cause
overheating in the outlet.
Read carefully the attached documentation explaining the assembly process.
Failure to assemble the instrument in the proper sequence might result in
damage to the instrument or even injury.
Do not expose the instrument to excessive dust or vibrations, or extreme cold
or heat (such as in direct sunlight, near a heater, or in a car during the day) to
prevent the possibility of panel disfiguration or damage to the internal
components.
Do not use the instrument in the vicinity of a TV, radio, stereo equipment,
mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio
may generate noise.
Do not place the instrument in an unstable position where it might accidentally
fall over.
Before moving the instrument, remove all connected cables.
When setting up the product, make sure that the AC outlet you are using is
easily accessible. If some trouble or malfunction occurs, immediately turn off
the power switch and disconnect the plug from the outlet. Even when the
power switch is turned off, electricity is still flowing to the product at the
minimum level. When you are not using the product for a long time, make sure
to unplug the power cord from the wall AC outlet.
Do not place the instrument against a wall (allow at least 3 cm/one-inch from
the wall), since this can cause inadequate air circulation, and possibly result in
the instrument overheating.
Power supply/Power cord
Do not open
Water warning
Fire warning
If you notice any abnormality
Power supply/Power cord
Assembly
Location
CVP-509/505/503/501 Owner’s Manual 7
Before connecting the instrument to other electronic components, turn off the
power for all components. Before turning the power on or off for all
components, set all volume levels to minimum. Also, be sure to set the
volumes of all components at their minimum levels and gradually raise the
volume controls while playing the instrument to set the desired listening level.
In the case of a model with a polished finish, gently remove dust and dirt with
a soft cloth. Do not wipe too hard since small particles of dirt can scratch the
instrument's finish.
When cleaning the instrument, use a soft, dry or slightly damp cloth. Do not
use paint thinners, solvents, cleaning fluids, or chemical-impregnated wiping
cloths.
During extreme changes in temperature or humidity, condensation may occur
and water may collect on the surface of the instrument. If water is left, the
wooden parts may absorb the water and be damaged. Make sure to wipe any
water off immediately with a soft cloth.
•Take care that the key cover does not pinch your fingers, and do not insert a
finger or hand in any gaps on the key cover or instrument.
Never insert or drop paper, metallic, or other objects into the gaps on the key
cover, panel or keyboard. If this happens, turn off the power immediately and
unplug the power cord from the AC outlet. Then have the instrument inspected
by qualified Yamaha service personnel.
Do not place vinyl, plastic or rubber objects on the instrument, since this
might discolor the panel or keyboard.
In the case of a model with a polished finish, bumping the surface of the
instrument with metal, porcelain, or other hard objects can cause the finish to
crack or peel. Use caution.
Do not rest your weight on, or place heavy objects on the instrument, and do
not use excessive force on the buttons, switches or connectors.
Do not use the instrument/device or headphones for a long period of time at a
high or uncomfortable volume level, since this can cause permanent hearing
loss. If you experience any hearing loss or ringing in the ears, consult a
physician.
Do not place the bench in an unstable position where it might accidentally fall
over.
Do not play carelessly with or stand on the bench. Using it as a tool or step-
ladder or for any other purpose might result in accident or injury.
Only one person should sit on the bench at a time, in order to prevent the
possibility of accident or injury.
Do not attempt to adjust the bench height while sitting on the bench, since this
can cause excessive force to be imposed on the adjustment mechanism,
possibly resulting in damage to the mechanism or even injury.
If the bench screws become loose due to extensive long-term use, tighten
them periodically using the included tool.
Saving and backing up your data
Edited Songs/Styles/Voices and MIDI settings are lost when you turn off the
power to the instrument. Save the data to the USER tab display (page 68), USB
storage device (USB flash memory/floppy disk, etc).
Data in the USER tab display may be lost due to malfunction or incorrect
operation. Save important data to a USB storage device.
When you change settings in a display page and then exit from that
page, Data other than above (edited Songs/Styles/Voices and MIDI
settings, etc.) is automatically stored. However, this edited data is
lost if you turn off the power without properly exiting from the
relevant display.
Backing up the USB storage device
•To protect against data loss through media damage, we recommend that you
save your important data onto two USB storage devices.
Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.
Always turn the power off when the instrument is not in use.
Connections
Maintenance
Handling caution
Using the bench (If included)
Saving data
(1)B-13 2/2
8 CVP-509/505/503/501 Owner’s Manual
Notices and Information
Notices and Information
Copyright Notices
• Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly
prohibited except for your personal use.
• This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with
respect to which it has license to use others’ copyrights. Such copyrighted materials include, without limitation, all com-
puter software, style files, MIDI files, WAVE data, musical scores and sound recordings. Any unauthorized use of such
programs and contents outside of personal use is not permitted under relevant laws.
Any violation of copyright has legal consequences.
DON’T MAKE, DISTRIBUTE OR USE ILLEGAL COPIES.
Information about functions/data bundled in the instrument
• Some of the preset songs have been edited for length or arrangement, and may not be exactly the same as the original.
• This device is capable of using various types/formats of music data by optimizing them to the proper format music data
for use with the device in advance. As a result, this device may not play them back precisely as their producers or com-
posers originally intended.
• The bitmap fonts used in this instrument have been provided by and are the property of Ricoh Co., Ltd.
• This product utilizes NF, an embedded Internet browser from ACCESS Co., Ltd. NF may not be separated from this
product, nor may it be sold, lent or transferred in any way. Also, NF may not be reverse-engineered,
reverse-compiled, reverse-assembled or copied.
• This software includes a module developed by the Independent JPEG Group.
• The photos of the harpsichord, bandoneon, hackbrett, music box, dulcimer and cimbalom, shown in the displays of the
Clavinova, are courtesy of the Gakkigaku Shiryokan (Collection for Organolgy), Kunitachi College of Music.
• The following instruments, shown in the displays of the Clavinova, are on display at the Hamamatsu Museum of Musical
Instruments:balafon, gender, kalimba, kanoon, santur, gamelan gong, harp, hand bell, bagpipe, banjo, carillon, mandolin,
oud, pan flute, pungi, rabab, shanai, sitar, steel drum, and tambra.
• (CVP-509/505) MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
CVP-509/505/503/501 Owner’s Manual 9
Included Accessories
Included Accessories
Accessory CD-ROM for Windows
• Owner’s Manual
• Data List
Accessory CD-ROM for Windows Installation Guide
• “50 greats for the Piano” Music Book
• My Yamaha Product User Registration
*The PRODUCT ID on the sheet will be needed when you fill out the User Registration form.
The following item may be included or optional, depending on your locale:
• Bench
The instrument is compatible with the following formats.
“GM (General MIDI)” is one of the most common Voice allocation formats. “GM System Level 2” is a standard
specification that enhances the original “GM” and improves Song data compatibility. It provides for increased
polyphony, greater Voice selection, expanded Voice parameters, and integrated effect processing.
XG is a major enhancement of the GM System Level 1 format, and was developed by Yamaha specifically to pro-
vide more Voices and variations, as well as greater expressive control over Voices and effects, and to ensure compat-
ibility of data well into the future.
GS was developed by the Roland Corporation. In the same way as Yamaha XG, GS is a major enhancement of the
GM specifically to provide more Voices and Drum kits and their variations, as well as greater expressive control
over Voices and effects.
The Yamaha XF format enhances the SMF (Standard MIDI File) standard with greater functionality and open-
ended expandability for the future. This instrument is capable of displaying lyrics when an XF file containing lyric
data is played.
“SFF (Style File Format)” is an original Style file format by Yamaha which uses a unique conversion system to pro-
vide high-quality automatic accompaniment based on a wide range of chord types. “SFF GE (Guitar Edition)” is an
enhanced format of SFF, which features improved note transposition for guitar tracks.
(CVP-509/505/503)
VH (Vocal Harmony) employs the digital signal processing technology to automatically add appropriate vocal har-
monies to a lead vocal line sung by the user.
(CVP-509)
AEM” is the trademark of Yamaha’s leading-edge tone generation technology. For information on AEM, refer to
page 41.
10 CVP-509/505/503/501 Owner’s Manual
About the Manuals
About the Manuals
This instrument has the following documents and instructional materials.
Included Documents
Owner’s Manual (this book)
Provides overall explanations of the Clavinova basic functions. See “How to use this Owner’s Manual” below.
Data List
Contains various important preset content lists such as Voices, Styles, Effects, as well as MIDI-related information.
Installation Guide
Provides introduction to the contents of the supplied CD-ROM and explains how to install the included software.
Online Materials (Downloadable from the web)
The following instructional materials are available for downloading from the Yamaha Manual Library. Access the Yamaha
Manual Library, then enter your model name (CVP-509, for example) in the Model Name area to search the manuals.
Reference Manual (only in English, French, German and Spanish)
Explains advanced features of the instrument, not explained in the Owner’s Manual. For example, you can learn how
to create original Styles or Songs, or find detailed explanations of specific parameters.
Internet Connection Guide (only in English, French, German and Spanish)
Explains how to connect the instrument to the Internet in detail, in order to use the Internet Direct Connection
function.
MIDI Basics (only in English, French, German and Spanish)
If you want to know more about MIDI and how to use it, refer to this introductory book.
• The illustrations and LCD screens as shown in this manual are for instructional purposes only, and may appear
somewhat different from those on your instrument.
• The example Operation Guide displays shown in this Manual are taken from the CVP-509, and in English.
• The company names and product names in this manual are the trademarks or registered trademarks of their respec-
tive companies.
Yamaha Manual Library http://www.yamaha.co.jp/manual/
CVP-501CVP-503CVP-505CVP-509
Provides an overview of
the chapter contents.
Shows the location of
buttons which are
explained in the chap-
ter.
The displays are taken
from the CVP-509, and
in English. (These may
appear somewhat dif-
ferent from those on
your instrument.)
Provides additional
helpful information in
the frame.
Shows that this function is only
available on one model.
Provides supplemen-
tary notes and
detailed information.
Introduces advanced features related
to the chapter contents.
Detailed explanations are provided in
the Reference Manual (above).
Chapter title for navigat-
ing through the manual.
How to use this Owner’s Manual
CVP-501CVP-503CVP-505CVP-509
Ex.: These icons indicate that
this function is only on the CVP-
509/505/503 but not on the
CVP-501.
CVP-509/505/503/501 Owner’s Manual 11
Contents
Contents
Welcome to Clavinova 4
Notices and Information..............................................................................8
Included Accessories..................................................................................9
About the Manuals....................................................................................10
Panel Controls 12
Starting Up 14
Powering Up.............................................................................................14
Using the Music Rest................................................................................15
Using Headphones ...................................................................................16
Changing the Display Language ...............................................................17
Adjusting the Contrast of the Display ....................................17
Showing the Owner Name in the Opening Display....................................18
Playing the Demos....................................................................................18
Display-based Controls ............................................................................20
The Messages Shown in the Display ........................................................23
Instant Selection of the Displays — Direct Access ...................................23
Main Display Configuration......................................................................24
File Selection Display Configuration ........................................................26
Entering Characters ..................................................................................27
Restoring the Factory-programmed Settings ............................................29
Data Backup..............................................................................................29
1 Perform the piano songs by Clavinova 30
One-touch Piano Play...............................................................................30
Setting the touch sensitivity of the keyboard.............................................31
Using the Pedals.......................................................................................32
Using the Metronome ...............................................................................33
Enhancing the Acoustic Realism of the Sound (iAFC) ....................34
Maintenance .............................................................................................36
2 Voices – Playing the keyboard – 37
Playing Preset Voices ...............................................................................37
Transposing the Pitch of the Keyboard .....................................................42
Adding Articulation Effects to Super Articulation Voices...........................43
Applying Voice Effects ..............................................................................44
Creating Your Original Organ Flutes Voices .............................................46
3 Styles – Playing Rhythm and Accompaniment – 48
Playing Only the Rhythm Channels of a Style ...........................................48
Playing a Style with the Auto Accompaniment ..........................................49
Operating Style Playback ..........................................................................52
Calling up the Panel Settings to Match the Style (Repertoire)...................54
Appropriate Panel Settings for the Selected Style (One Touch Setting).....55
Turning Style Parts On/Off and Changing Voices .....................................57
Adjusting the Volume Balance Between the Style and Keyboard ...............58
4 Songs – Playing, Practice and Recording Songs – 59
Playback of Songs ....................................................................................59
Displaying Music Notation (Score)...........................................................62
Displaying Lyrics (Text)............................................................................63
Turning Song Channels On/Off.................................................................64
One-handed Practice with the Guide Lamps .............................................64
Repeat Playback........................................................................................65
Recording Your Performance (Quick Recording) ......................................66
Saving Files..............................................................................................68
File Management ......................................................................................69
5 Music Finder – Calling Up Ideal Setups (Voice, Style, etc.)
for Each Song – 73
Selecting the Desired Song from among the Panel Settings .....................75
Searching the Panel Settings ....................................................................76
Registering the Song/Audio data (SONG/AUDIO) .................................... 77
6 Registration Memory – Saving and Recalling Custom Panel
Setups – 79
Registering Your Panel Setups................................................................. 79
Saving the Registration Memory as a Bank file ........................................ 80
7 USB Audio (CVP-509/505/503) – Playback and Recording
Audio Files – 83
Playing Back Audio Files ......................................................................... 83
Recording Your Performance as Audio .................................................... 86
8 Mixing Console – Editing the Volume and Tonal Balance –
88
Basic Procedure....................................................................................... 88
Changing Voices and Adjusting Panning/Volume for Each Part .............. 90
Applying Effects to Each Part ................................................................... 92
Adjusting the Overall Volume Using the Master Compressor ........ 93
9 Internet Direct Connection – Connecting the Clavinova
Directly to the Internet – 95
Entering the Internet Direct Connection Function..................................... 95
Connecting the Instrument to the Internet ................................................ 95
Operations in the Special Website ........................................................... 97
10 Connections – Using Your Instrument with Other Devices –
99
Connecting Audio Devices..................................................................... 100
Connecting an External Monitor ......................................... 101
Connecting a Microphone or Guitar .......................... 102
Connecting a Footswitch/Foot Controller .............................................. 105
Connecting a USB Storage Device ......................................................... 106
Connecting to the Internet...................................................................... 107
Connecting to a Computer ..................................................................... 108
Connecting External MIDI Devices......................................................... 109
11 Utility – Making Global Settings – 110
Basic Procedure..................................................................................... 110
CVP-509/505: Keyboard Stand Assembly 111
CVP-503: Keyboard Stand Assembly 114
CVP-501: Keyboard Stand Assembly 116
Installing the Floppy Disk Drive (Optional) (CVP-509/505)118
Handling the Floppy Disk Drive (FDD) and Floppy Disks 119
Troubleshooting 120
Panel Button Chart 123
Specifications 125
Index 128
CVP-501CVP-503
CVP-509
CVP-509
CVP-505CVP-509
CVP-503CVP-505CVP-509
12 CVP-509/505/503/501 Owner’s Manual
Panel Controls
Panel Controls
1 [USB TO DEVICE] terminal ...........................Page 106
For connecting a USB storage device.
2 [MASTER VOLUME] control ...........................Page 15
Adjusts the overall volume.
3 MIC [SIGNAL]/[OVER] lamps
(CVP-509/505/503) ........................................Page 102
These indicate the input level of the connected microphone.
4 [DEMO] button ................................................Page 18
Plays the Demos.
5 [METRONOME ON/OFF] button .....................Page 33
Turns the metronome sound on or off.
6 TRANSPOSE buttons .....................................Page 42
These transpose the pitch in semitone steps.
7 [TAP TEMPO]/TEMPO buttons .......................Page 53
These control the tempo for Style, Song and Metronome play-
back.
8 STYLE CONTROL buttons .............................Page 48
These select a Style and control Style playback.
9 [MUSIC FINDER] button .................................Page 73
Searches the appropriate panel settings or desired song.
) [LCD CONTRAST] knob (CVP-503/501)........Page 17
Adjusts the LCD contrast.
! [MIXING CONSOLE] button ............................Page 88
Controls over aspects of keyboard, Style and Song parts.
@ [CHANNEL ON/OFF] button......................Page 57, 64
Turns channels of Style/Song on or off.
# LCD and related controls................................Page 20
$ [USB] button ............................................. Page 26, 83
Loads certain data to the USB storage device and allows you to
record your performance to the USB storage device in audio
format.
% [FUNCTION] button
(See Reference Manual on website.)
Lets you make some advanced settings and create your origi-
nal Styles and Songs.
^ PART ON/OFF buttons ................................... Page 39
Turns the keyboard parts on or off.
& [INTERNET] button......................................... Page 95
Accesses to Internet website.
* SONG CONTROL buttons .............................. Page 59
These select a Song and control Song playback.
( [PIANO RESET] button................................... Page 30
Recalls the grand piano settings.
º REGISTRATION MEMORY buttons................ Page 79
These register and recall panel setups.
¡ VOICE CONTROL buttons.............................. Page 37
These select a Voice.
ONE TOUCH SETTING buttons...................... Page 55
These call up the appropriate panel settings for the Style.
£ [VOICE EFFECT] button................................. Page 44
Applies some effects to the keyboard performance.
¢ Power switch ............................................. Page 14
Turns the instrument’s power on or off.
Drum Kit icons................................................ Page 40
These indicate drum instruments assigned to each key when
the Standard Kit 1 is selected.
1
2
4
5
6
!
@
#
)
7
9
8
3
(CVP-503/501)
A-1 B-1 C0 D0 E0 F0 G0 A0 B0 C1 D1 E1 F1 G1 A1 B1 C2 D2 E2 F2 G2 A2 B2 C3 D3 E3 F3 G3 A3
CVP-509/505/503/501 Owner’s Manual 13
Panel Controls
$
%
^
&
¡*
(
£
º
¢
B3 C4 D4 E4 F4 G4 A4 B4 C5 D5 E5 F5 G5 A5 B5 C6 D6 E6 F6 G6 A6 B6 C7
CVP-509/505
CVP-503/501
Music rest
Page 15
I/O connectors
Page 99
Guide lamps
Page 64
Music rest
Page 15
Pedals
Page 32
Key cover
Page 14
Key cover
Page 14
I/O connectors
Page 99
Power switch
Page 14
Guide lamps
Page 64
Power switch
Page 14
Sheet music braces
Page 15
Pedals
Page 32
Sheet music braces
Page 15
14 CVP-509/505/503/501 Owner’s Manual
Starting Up
Starting Up
1 Connect the power cable.
First insert the plug of the power cable into the AC connector on the instrument,
then plug the other end of the cable into the proper AC outlet on the wall.
2 Open the key cover.
3 Turn the power on.
The display located in the center of the front panel and the power indicator
located below the left end of the keyboard lights up.
Powering Up
1-1
1-2
CVP-509/505 CVP-503/501
The shape of the plug and out-
let differ depending on locale.)
CAUTION
Hold the cover with both hands
when opening or closing it. Do
not release it until it is fully
opened or closed. Be careful to
avoid catching fingers (yours or
others, especially children’s)
between the cover and the unit.
CAUTION
Do not place objects such as a
piece of metal or paper on top of
the key cover. Small objects
placed on the key cover may fall
inside the unit when the cover is
opened and may be nearly
impossible to remove. This
could cause electric shock,
short circuit, fire or other seri-
ous damage to the instrument.
Be careful to avoid catching
your fingers when opening
the cover.
Be careful to avoid catching
your fingers when opening the
cover.
CVP-501: Lift the cover slightly,
then push and slide it open.
CVP-509/505/503: Using the
hand grip on the front, lift open
the key cover.
The power indicator lights up.
CVP-509/505/503/501 Owner’s Manual 15
Starting Up
4 Adjust the volume.
While playing the keyboard, adjust the volume level by using the [MASTER
VOLUME] located at the left of the panel.
5 After you use the instrument, press the power switch to turn the
power off.
The screen and the power indicator turn off.
6 Close the key cover.
CVP-509/505/503
Pull the music rest toward yourself as far as it will go. When raised, the music rest is
fixed at a certain angle and cannot be adjusted.
The braces allow you to hold the pages of music books in place.
To lower the music rest, lift the music rest slightly, then turn it back slowly.
CAUTION
Even when the power switch is
turned off, electricity is still
flowing to the instrument at the
minimum level. When you are
not using the instrument for a
long time, make sure you
unplug the power cable from the
wall AC outlet.
Using the Music Rest
CVP-509/505/503: Grip the metal rim at the
top of the panel, and close the key cover.
CVP-501: Slide the cover toward you and
gently lower the cover over the keys.
Be careful to avoid catch-
ing your fingers when clos-
ing the cover.
Be careful to avoid catching
your fingers when closing the
cover.
CAUTION
When raising or lowering the
music rest, do not release your
hands from the music rest until
it is all the way up or down.
Sheet music braces
CAUTION
Before lowering the music rest,
close the sheet music braces.
The music rest will not close
unless the sheet music braces
are also closed.
Close the sheet music braces
Be careful to avoid catching
your fingers.
16 CVP-509/505/503/501 Owner’s Manual
Starting Up
CVP-501
First pull the music rest up and toward yourself as far as it will go, flip down the two
metal supports at the left and right on the rear of the music rest, then lower the music
rest so that it rests on the metal supports.
To lower the music rest, first pull the music rest toward yourself as far as it will go,
raise the two metal supports, then gently lower the music rest backward until it is all
the way down.
Connect a pair of headphones to one of the [PHONES] jacks located on the bottom
left of the instrument.
Two sets of standard stereo headphones can be connected. (If you are using only one
pair of headphones, you can plug them into either of these jacks.).
A headphone hanger is included in the instrument package so that you can hang the
headphones on the instrument. Install the headphone hanger using included two
screws (4 x 10mm) as shown in the figure.
CAUTION
Do not try to use the music rest
in a half-raised position.
Using Headphones
CAUTION
Do not listen with the head-
phones at high volume for long
periods of time. Doing so may
cause hearing loss.
Using the Headphone Hanger
MIN MAX
INPUT
MIC.
MIC. LINE PHONES
VOLUME
LINE IN
CVP-509/505/503
CVP-501
Standard phone plug
CAUTION
Do not hang anything other than
the headphones on the hanger.
Otherwise, the instrument or the
hanger may be damaged.
CVP-509/505 CVP-503/501
CVP-509/505/503/501 Owner’s Manual 17
Starting Up
This determines the language used in the display for messages, file names, and
character input.
1 Call up the operation display.
[FUNCTION] [J] UTILITY TAB [E][F] OWNER
2 Use the [4 ▲▼]/[5 ▲▼] buttons to select the desired language.
You can adjust the contrast of the display by turning the [LCD CONTRAST] knob
located to the left of the display.
Changing the Display Language
NOTE
Throughout this manual, arrows are
used in the instructions, indicating in
shorthand the process of calling up
certain displays and functions.
Adjusting the Contrast of the Display
2
1
CVP-501CVP-503CVP-505CVP-509
NOTE
Since the color display of the CVP-
509/505 has a high level of visibility,
no contrast adjustment function is
necessary.
18 CVP-509/505/503/501 Owner’s Manual
Starting Up
You can have your name appear in the opening display (the display that appears
when the power is turned on).
1 Call up the operation display.
[FUNCTION] [J] UTILITY TAB [E][F] OWNER
2 Press the [I] (OWNER NAME) button to call up the Owner Name
display.
Refer to page 27 for character-entry details.
The Demos provide helpful, easy-to-understand introductions to the features and
functions as well as sound demonstrations.
1 Press the [DEMO] button to start the Demos.
Overview Demo will play back continuously, calling up the various displays in
sequence.
Showing the Owner Name in the Opening Display
NOTE
(CVP-509/505) If desired, you can
also change the background picture in
the Main display by pressing the [J]
(MAIN PICTURE) button in step 2
here.
Display the version number
To check the version number of this instrument, press the [7
▲▼]/[8 ▲▼]
(VERSION) buttons in the display in step 1 above. Press the [EXIT] button
or [8
▲▼] button to return to the original display.
Playing the Demos
CVP-509/505/503/501 Owner’s Manual 19
Starting Up
2 Press the [7 ▲▼]/[8 ▲▼] (SKIP OVERVIEW) buttons in the Demo
display to call up the specific Demo menu.
3 Press one of the [A] – [D] buttons to show a specific Demo.
Pressing the [E] button returns to the display of step 2.
The sub menus are shown at the bottom of the display. Press one of the [1 ▲▼]
– [8 ▲▼] buttons corresponding to the sub menu.
4 Press the [EXIT] button several times to exit from the Demos.
NOTE
The demo menu differs depending on
your instrument.
2
3
NOTE
To return to the higher level menu,
press the [EXIT] button.
20 CVP-509/505/503/501 Owner’s Manual
Starting Up
The LCD provides comprehensive at-a-glance information on all current settings.
The displayed menu can be selected or changed by the controls around the LCD.
The [A] – [J] buttons are used to select the corresponding menu.
• Example 1
• Example 2
Display-based Controls
[A] – [J] buttons
[A] – [E]
buttons
(see below)
[F] – [J]
buttons
(see below)
TAB [E][F]
buttons
(page 21)
[DIRECT
ACCESS]
button
(page 23)
[DATA ENTRY] dial
and
[ENTER] button
(page 22)
[1 ▲▼] – [8 ▲▼] buttons
(page 21)
[EXIT] button
(page 22)
In the File Selection display (page 26), the [A] – [J] buttons
can be used to select the corresponding respective files.
The [A] and [B] buttons
are used to move the
cursor up or down.
The [C], [D], [H]
and [I] buttons
are used to
select the cor-
responding
parameter.
CVP-509/505/503/501 Owner’s Manual 21
Starting Up
These buttons are used mainly to change the Pages of displays that have “tabs” at the
top.
The [1 ▲▼] – [8 ▲▼] buttons are used to make selections or adjust settings (up or
down correspondingly) for functions shown directly above them.
TAB [E][F] buttons
[1 ▲▼] – [8 ▲▼] buttons
If a menu appears
in this section of
the display, use
the [1 ] – [8 ]
buttons.
If a menu appears
in this section of
the display, use the
[1 ] – [8 ] but-
tons.
If list of the menu
appears, use the [1
▲▼] – [8 ▲▼] button
to select the desired
item.
If a parameter appears in slider
(or knob) form, use the [1 ▲▼] –
[8 ▲▼] button to adjust the
value.
22 CVP-509/505/503/501 Owner’s Manual
Starting Up
Depending on the selected LCD display, the [DATA ENTRY] dial can be used in the
following two ways.
• Selecting files (Voice, Style, Song, and so on)
When one of the File Selection displays (page 26) is shown, you can use the
[DATA ENTRY] dial and the [ENTER] button to select a file (Voice, Style, Song,
and so on).
• Adjusting the parameter values
You can conveniently use the [DATA ENTRY] dial in tandem with the [1 ▲▼] –
[8 ▲▼] buttons to adjust parameters indicated in the display.
This convenient technique also works well with pop-up parameters such as Tempo
and Transpose. Simply press the appropriate button (ex., TEMPO [+]), then rotate
the [DATA ENTRY] dial and press [ENTER] to close the window.
[DATA ENTRY] dial and [ENTER] button
[EXIT] button
Rotate the [DATA ENTRY] dial
to move the cursor.
Press the [ENTER] button to
actually select the highlighted
file.
Rotate the [DATA ENTRY] dial to
adjust the selected parameter.
Select the desired parameter with the appropriate
[1 ▲▼] – [8 ▲▼] button.
Pressing the [EXIT] button returns you to the previously indicated
display.
Pressing the [EXIT] button several times returns to the default
Main display (page 24).
CVP-509/505/503/501 Owner’s Manual 23
Starting Up
A message (information or confirmation dialog) sometimes appears on the screen to
facilitate operation. When the message appears, simply press the appropriate button.
With the convenient Direct Access function, you can instantly call up the desired
display — with just a single additional button press.
1 Press the [DIRECT ACCESS] button.
A message appears in the display prompting you to press the appropriate button.
2 Press the button or pedal corresponding to the desired setting
display to instantly call up that display.
For example, pressing the [GUIDE] button calls up the display in which the
Guide mode can be set.
Refer to the separate Data List for a list of the displays that can be called up with the
Direct Access function.
The Messages Shown in the Display
Instant Selection of the Displays — Direct Access
24 CVP-509/505/503/501 Owner’s Manual
Starting Up
The display that appears when the power is turned on is the Main display. The Main
display shows the current basic settings such as the currently selected Voice and
Style, allowing you to see them at a single glance. The Main display is the one you’ll
usually see when you play the keyboard.
1 Voice name
Displays the Voice names currently selected for RIGHT 1, RIGHT 2 and LEFT
parts (page 37). Pressing one of the [A] – [C] and [F] – [I] buttons calls up the
Voice Selection display for each part.
2 Style name and related information
Displays the currently selected Style name, time signature and tempo. Pressing
the [D] button (CVP-509/505/503) or one of the [1 ▲▼] – [4 ▲▼] buttons
(CVP-501) calls up the Style Selection display (page 48).
3 Current chord name
When the [ACMP ON/OFF] button is set to on, the chord specified in the chord
section of the keyboard will be displayed. When the Song containing the chord
data is played, the current chord name will be displayed.
4 Song name and related information
Displays the currently selected Song name, time signature and tempo. Pressing
the [I] button (CVP-509/505/503) or one of the [5 ▲▼] – [8 ▲▼] buttons
(CVP-501) calls up the Song Selection display (page 59).
5 Registration Memory Bank name
Displays the currently selected Registration Memory Bank name and
Registration Memory number (CVP-509/505/503). Pressing the [J] button calls
up the Registration Memory Bank Selection display (page 80).
6 Volume Balance
Displays the volume balance among the parts. When you use the CVP- 501,
pressing the [C] button calls up the volume balance display.
Adjust the volume balance among the parts by using the [1 ▲▼] – [7 ▲▼]
buttons.
7 Transpose
Displays the amount of transposition in semitone units (page 42).
Main Display Configuration
1
9
5
4
6
7)
)
8
2
3
1
5
4
7
8
2
3
6
CVP-509/505/503 CVP-501
NOTE
The corresponding button for each
Voice part differs depending on your
instrument.
NOTE
When the Left Hold function (page 45)
is ON, an “H” indication appear
NOTE
If the Volume Balance display is not
shown, press the [EXIT] button to
show the Volume Balance display.
CVP-509/505/503/501 Owner’s Manual 25
Starting Up
8 TEMPO/BAR/BEAT
Displays the current position (tempo/bar/beat) in Style playback or Song
playback.
9 USB Audio information (CVP-509/505/503)
Displays information for the selected audio file (file name, time, etc.) While
recording, a “REC” indication appears.
) Registration Sequence
Appears when the Registration Sequence (page 82) is active.
NOTE
For detailed information about the
Registration Sequence, refer to the
Reference manual on the website.
26 CVP-509/505/503/501 Owner’s Manual
Starting Up
The File Selection display is for selecting Voice, Styles, and other data. The File
Selection display appears when you press one of the VOICE or STYLE category
selection buttons, SONG [SELECT] button, etc.
1 Location (drive) of data
PRESET Location where pre-programmed (preset) data is stored.
USER Location where recorded or edited data is saved.
USB Location where data on USB storage device (USB flash memory,
floppy disk, etc.) is saved.This appears only when USB storage
device(s) is connected to the [USB TO DEVICE] terminal
(page 106).
2 Selectable data (files)
The files that can be selected on this display are shown. If more than 10 files
exist, the page numbers (P1, P2 ...) are shown below the files. Pressing the
corresponding button changes the display page. When other pages follow, the
“Next” button appears, and for the previous page, the “Prev.” button appears.
3 File/folder operation menu
You can save and manage your data files (copy, move, delete, etc.) from this
menu. For detailed instructions, refer to pages 68 – 71.
File Selection Display Configuration
3
2
1
NOTE
Hereafter in this manual, any USB
storage device such as USB flash
memory, floppy disk drive, etc. will be
referred to as “USB storage device.”
NOTE
The data, both pre-programmed and
your own original, are saved as
“files.”
NOTE
You can open the File Selection display
for a specified file from the [USB] button.
[USB] [A] SONG/[B] STYLE/[C]
REGIST/[F] VOICE.
CVP-509/505/503/501 Owner’s Manual 27
Starting Up
The instructions that follow show you how to enter characters for naming your files/
folders, inputting keywords, etc. Entering characters should be done in the display
shown below.
1 Change the type of character by pressing the [1 ] button.
If you select a language other than Japanese as the Language (page 17), the
following different types of characters are available:
• CASE capital letters, numbers, marks
• case lowercase letters, numbers, marks
If you select Japanese as the Language (page 17), the following different types
of characters and sizes can be entered:
Closing the current folder and calling up the next highest level
folder
In the PRESET display, several data (files) are contained together in a folder.
You can also organize your original data in the USER/USB display by creat-
ing several new folders (page 69).
To close the current folder and call up the next highest level folder, press the
[8 ] (UP) button.
Example of the PRESET Voice Selection display
The PRESET Voice files are categorized and contained in appropriate folders.
This display shows the Voice
files in a folder.
The next highest level — in this case,
folder — is shown. Each folder
shown in this display contains appro-
priately categorized Voices.
Entering Characters
Several different characters are
assigned to each button, and the
characters change each time you
press the button.
14
3
2
NOTE
Depending on the display for charac-
ter entry you are working in, some
types of characters cannot be
entered.”
28 CVP-509/505/503/501 Owner’s Manual
Starting Up
2 Use the [DATA ENTRY] dial to move the cursor to the desired
position.
3 Press the [2 ▲▼] – [6 ▲▼] and [7 ] buttons, corresponding to
the character you wish to enter.
To actually enter the selected character, move the cursor or press another letter-
input button. Alternately, you can wait for a short time and the characters will be
entered automatically.
For details on entering characters, refer to “Other character-entry operations”
below.
4 Press the [8 ] (OK) button to actually enter the new name and
return to the previous display.
• Deleting characters
Move the cursor to the character you wish to delete by using the [DATA ENTRY]
dial, and press the [7 ] (DELETE) button. To delete all characters on the line at
once, press and hold the [7 ] (DELETE) button.
• Entering special character marks (Japanese “< >” and “< >”)
Select a character to which a character mark is to be added and press the [6 ]
button before actual entry of the character.
• Entering marks or space
1. Press the [6 ] (SYMBOL) button to call up the mark list.
2. Use the [DATA ENTRY] dial to move the cursor to the desired mark or space,
then press the [8 ] (OK) button.
• Converting into Kanji (Japanese language)
When the entered “hiragana” characters are shown in reverse display (highlighted),
press the [1 ]/[ENTER] button one or several times to convert the characters into
the appropriate kanji. You can change the reversed area by using the [DATA
ENTRY] dial. To actually enter the change, press the [1 ]/[8 ] (OK) button.
To change the converted kanji back to “hiragana,” press the [7 ] (DELETE) button.
To clear the reversed area at once, press the [8 ] (CANCEL) button.
• Selecting custom icons for files (shown at left of file name)
1. Press the [1 ] (ICON) button to call up the ICON SELECT display.
2. Select the icon by using the [A] – [J] buttons, [3 ▲▼] – [5 ▲▼] buttons or
[DATA ENTRY] dial. The ICON display includes several pages. Press the TAB
[E][F] buttons to select different pages.
3. Press the [8 ] (OK) button to apply the selected icon.
NOTE
Even if you select Japanese as the
Language, when you enter the charac-
ters in the lyrics editing display, the
Internet Setting display, or website,
the type of characters “CASE”/“case”
may be entered.
(kana-kan)......Hiragana and Kanji, marks (full size)
(kana) ..............Katakana (normal size), marks (full size)
(kana) ..............Katakana (half size), marks (half size)
..........................Alphabet (capital and small letters, full size), numbers
(full size), marks (full size)
..........................Alphabet (capital and small letters, half size), num-
bers (half size), marks (half size)
NOTE
When entering a password for a web-
site or the WEP key for wireless LAN
connection, the characters are con-
verted to asterisks (*) for security pur-
poses.
NOTE
To cancel the character-entering oper-
ation, press the [8 ] (CANCEL) but-
ton.
NOTE
The file name can contain up to 41
characters and the folder name can
contain up to 50 characters.
Other character-entry operations
NOTE
In the case of characters which are not
accompanied by special character
marks (with the exception of kanakan
and half-size katakana), you can call
up the mark list by pressing the [6 ]
button after selecting a character
(before actual entry of a character).
NOTE
To cancel the operation, press the
[8 ] (CANCEL) button.
CVP-509/505/503/501 Owner’s Manual 29
Starting Up
While holding the C7 key (right-most key on the keyboard), turn the power on.
This restores the all settings (except Internet Settings, etc.) to the factory default.
You can also restore a specified setting to the factory default value, or save/load your
own reset settings. Call up the operation display: [FUNCTION] [J] UTILITY
TAB [E][F] SYSTEM RESET. For details, refer to the Reference Manual on the
website.
This procedure backs up all data stored in USER drive (except Protected Songs) and
all settings including Internet Direct Connection settings.
For maximum data security Yamaha recommends that you copy or save your
important data to a USB storage device. This provides a convenient backup if the
internal memory is damaged.
1 Insert/connect the backup USB storage device (destination).
2 Call up the operation display.
[FUNCTION] [J] UTILITY TAB [E][F] OWNER
3 Press the [D] (BACKUP) button to save the data to the USB
storage device.
To restore the data, press the [E] (RESTORE) button in this display. When the
operation is complete, the instrument will be restarted automatically.
Restoring the Factory-programmed Settings
NOTE
If you want to initialize only the Regis-
tration Memory setting (page 79),
turn the power on while holding the
B6 key.
NOTE
To reset the Internet Settings, call up
the operation display: [INTERNET]
[5 ] SETTING [A] NETWORK
SETTINGS [E] INITIALIZE SET UP.
C7
Data Backup
NOTE
Before using a USB storage device, be
sure to read “Connecting a USB Stor-
age Device” on page 106.
NOTE
Completing the backup/restore opera-
tion may take a few minutes.
CAUTION
Move the Protected Songs
which are saved to the USER
display before restoring. If the
Songs are not moved, the oper-
ation deletes the data.
NOTE
To save the Song, Style, Registration
Memory Bank and Voice indepen-
dently, execute the Copy and Paste
operation from the File Selection dis-
play (page 70).
NOTE
To save the Music Finder Record,
Effect, MIDI Template and System
File, call up the operation display:
[FUNCTION] [J] UTILITY TAB
[E][F] SYSTEM RESET. For more
information, refer to the Reference
Manual on the website.
2
3
1
30 CVP-509/505/503/501 Owner’s Manual
Perform the piano songs by Clavinova
Perform the piano songs by
Clavinova
Here, we’ll call up and play the piano voice. You can play the piano voice using
the pedals or metronome.
This convenient, easy-to-use feature completely and automatically reconfigures the
entire instrument for optimum piano performance. No matter what settings you’ve
made from the panel, you can instantly call up the piano settings by a single button
press.
Press the piano-shaped [PIANO RESET] button.
The convenient Piano Lock function lets you “lock” the piano so that you don’t
inadvertently change the settings by pressing another button on the panel. Once
locked, the instrument stays in the piano mode, even if other buttons are pressed —
preventing you from accidentally playing other sound during your piano
performance.
1 Press and hold down the [PIANO RESET] button for three
seconds or longer.
A message appears prompting you to enable Piano Lock.
2 Press the [F] (OK) button to enable Piano Lock.
To turn Piano Lock off, press and hold down the [PIANO RESET] button again for
three seconds or longer.
One-touch Piano Play
Piano Lock Function
CVP-509/505/503/501 Owner’s Manual 31
Perform the piano songs by Clavinova
1
1
You can adjust the touch response of the instrument (how the sound responds to the
way you play the keys). This setting does not change the weight of the keyboard. The
touch sensitivity type becomes the common setting for all Voices.
1 Call up the operation display.
[FUNCTION] [D] CONTROLLER TAB [E][F] KEYBOARD/PANEL
[A] 1 INITIAL TOUCH
2 Use the [1 ▲▼]/[2 ▲▼] buttons to specify the touch response.
HARD 2...............Requires strong playing to produce high volume. Best for
players with a heavy touch.
HARD 1...............Requires moderately strong playing for high volume.
NORMAL ............. Standard touch response.
• SOFT 1 ...............Produces high volume with moderate playing strength.
• SOFT 2 ...............Produces relatively high volume even with light playing
strength. Best for players with a light touch.
Setting the touch sensitivity of the keyboard
2
NOTE
When you do not want to apply touch
sensitivity, set Touch to OFF for the
corresponding parts by using the [5
]– [7 ] buttons. When Touch is
set to OFF, you can specify the fixed
volume level by using the [4 ▲▼]
buttons.
NOTE
The touch sensitivity settings may
have no effect with certain Voices.
32 CVP-509/505/503/501 Owner’s Manual
1
1
Perform the piano songs by Clavinova
The instrument features three pedals.
• Right Pedal (Damper Pedal)
This pedal performs the same function as the damper pedal on an actual acoustic
piano, letting you sustain the sound of the Voices even after releasing the keys.
The right pedal can be used to control the half pedal effect.
• Center Pedal (Sostenuto Pedal)
When the Piano Voice is selected, if you play a note or chord on the keyboard and
press this pedal while holding the note(s), the notes will sustain as long as the
pedal is held. All subsequent notes will not sustain.
When a Voice other than piano is selected, a specific function appropriate for the
Voice is automatically assigned to the center pedal.
• Left Pedal
When the Piano Voice is selected, pressing this pedal reduces the volume and
slightly changes the timbre of the notes you play.
When a Voice other than piano is selected, a specific function appropriate for the
Voice is automatically assigned to the center pedal.
Using the Pedals
CVP-509/505 CVP-503/501
Right Pedal
Center Pedal
Left Pedal
Right Pedal
Center Pedal
Left Pedal
NOTE
Half-pedal: While playing the piano
with Sustain and you want to slightly
mute the sustained sound, release the
pedal from maximum position to half
position.
NOTE
Certain Voices, such as [STRINGS] or
[BRASS], sustain continuously when
the right/center pedal is pressed.
NOTE
Certain Voices such as drum kits may
not be affected by use of the right/
center pedal.
When you press the right pedal here, the notes you play
before you release the pedal have a longer sustain.
When you press the center pedal here while holding
the note(s), the notes will sustain as long as you hold
the pedal.
NOTE
You can adjust the depth of the left
pedal effect.
Voice Selection display [6 ]
VOICE SET TAB [E][F] CON-
TROLLER [A]/[B] LEFT PEDAL
For details, refer to the Reference
Manual on the website.
Making Settings for the Pedals
You can assign one of the various functions to the three pedals or an optional
foot controller/footswitch, doing things like controlling the Super Articulation
Voices or starting and stopping the Song (page 105).
Even when you assign a certain function to a pedal, pressing the [PIANO
RESET] button restores the pedal function to the default settings above.
CVP-509/505/503/501 Owner’s Manual 33
Perform the piano songs by Clavinova
1
1
The metronome provides a click sound, giving you an accurate tempo guide when
you practice, or letting you hear and check how a specific tempo sounds. Press the
[METRONOME ON/OFF] button to start/stop the metronome.
1 Press the TEMPO [-]/[+] button to call up the pop-up tempo
setting display.
2 Use the TEMPO [-]/[+] buttons to set the tempo.
Pressing and holding either button lets you continuously increase or decrease
the value.
You can also use the [DATA ENTRY] dial to adjust the value.
To reset the tempo, press the TEMPO [-]/[+] buttons simultaneously.
3 Press the [EXIT] button to close the Tempo display.
Using the Metronome
Adjusting the Metronome Tempo
NOTE
The number in the display indicates
how many quarter-note beats there
are in one minute.
NOTE
You can also change the time signa-
ture and volume of the metronome
sound:
[FUNCTION] [J] UTILITY TAB
[E][F] CONFIG 1 [B] 2 METRO-
NOME
For details, refer to the Reference
Manual on the website.
34 CVP-509/505/503/501 Owner’s Manual
1
1
Perform the piano songs by Clavinova
When iAFC is engaged, the instrument will sound deeper and more resonant, similar
to an acoustic musical instrument. This lets you experience the ambience and
reverberation that are characteristic of performing on stage or simulates the sustain
sound that occur when you press the damper pedal of a grand piano.
1 Call up the operation display.
[FUNCTION] [H] iAFC SETTING
2 Press the [D] button to turn the iAFC on.
3 Use the [3 ▲▼] – [6 ▲▼] buttons to adjust the iAFC effect depth.
Enhancing the Acoustic Realism of the Sound (iAFC)
CVP-501CVP-503CVP-505CVP-509
CAUTION
When using iAFC, do not block
or cover the speaker located on
the rear panel of the instrument.
The optimal iAFC effect cannot
be obtained if this speaker is
blocked.
NOTE
iAFC uses Yamaha’s EMR (Electronic
Microphone Rotator) technology to
ensure stability against acoustic feed-
back.
[3 ▲▼]/
[4
▲▼]
DYNAMIC
DAMPER
EFFECT
This simulates the sustain sound that occurs when you
press the damper pedal of a grand piano. The micro-
phone is not used, but the sound produced within the
instrument is processed to create a spacious sensation.
[5
▲▼]/
[6
▲▼]
SPATIAL
EFFECT
Spatial Effect creates a sense of reverberation and
spaciousness by picking up the output sound using
internal microphones and output the sound from the
speaker on the rear of the instrument. The spread and
spaciousness of the sound is different depending on
the depth. The default setting for the depth is 0.
For lower depth settings: This creates the resonance
and enhances the acoustic realism of the sound that is
characteristic of acoustic instruments by creating a
virtual soundboard.
For deeper depth settings: The sound of the instru-
ment itself and the sound of singing and other instru-
ments played nearby is picked up by internal
microphones, and processed to simulate the spatial
characteristics of performing together on stage.
3
CVP-509/505/503/501 Owner’s Manual 35
Perform the piano songs by Clavinova
1
1
4 If you’ve set the depth of SPATIAL EFFECT to a value other than
0, press the [I] (MIC CALIBRATION) button to call up the
calibration display.
The MIC CALIBRATION display appears. In this display, you can adjust the
sensitivity and response of iAFC so that the optimal iAFC effect will be
obtained.
5 Press the [G] (CALIBRATION START) button to begin
calibration.
When automatic adjust begins, a test sound (noise) will sound for about five
seconds. While automatic adjustment is being performed, do not make audible
noises in the vicinity of the Clavinova.
NOTE
If you are using headphones, discon-
nect the headphones before adjusting
iAFC calibration.
5
NOTE
If desired, you can restore the default
calibration setting by pressing the [J]
(BASIC SETTING) button in step 4.
36 CVP-509/505/503/501 Owner’s Manual
Perform the piano songs by Clavinova
1
Instrument and Bench Maintenance
When cleaning the instrument, use a soft, dry or slightly damp cloth.
If you are using a model with a polished finish, gently remove dust and dirt with a soft cloth. Do not wipe too hard
since small particles of dirt can scratch the instrument's finish.
To keep the surface polished, apply commercially available piano polisher to a soft cloth and wipe the instrument’s
surface with it. Then, polish it with a separate cloth. Before using any piano polisher, make sure to read the
instructions for proper usage.
• Tighten the screws of the instrument and bench periodically.
Bench Height Adjustment
The bench height can be adjusted by rotating the handle. Rotating clockwise heightens the bench. (Before shipment,
the handle is firmly fastened.)
Pedal Cleaning
As with an acoustic piano, pedals may become tarnished across the ages. When this occurs, polish the pedal with a
compound designed for piano pedals. Before using the compound, make sure to read the instructions for proper
usage.
Tuning
Unlike an acoustic piano, the instrument does not need to be tuned. It always stays perfectly in tune.
Transporting
If you move to another location, you can transport the instrument along with other belongings. You can move the unit
as it is (assembled) or you can disassemble the unit down to the condition it was in when you first took it out of the
box. Transport the keyboard horizontally. Do not lean it up against a wall or stand it up on its side. Do not subject the
instrument to excessive vibration or shock.
When transporting the assembled instrument, make
sure all screws are properly tightened and have not
been loosened by moving the instrument.
(CVP-509) After transporting the instrument, do the
following to ensure optimum performance of the
iAFC function (page 34).
• Place the Clavinova so that its rear panel is at least
10 cm away from the wall.
• (When using the SPATIAL EFFECT) Perform the
automatic adjustment of the iAFC function.
Maintenance
To keep your Clavinova in optimum condition, we recommend that you
periodically follow the maintenance points below.
CAUTION
Do not use paint thinners, solvents, cleaning fluids, or chemical-impregnated wiping cloths.
CAUTION
Do not use paint thinners, solvents, cleaning fluids, or chemical-impregnated wiping cloths. Otherwise, the pedal may become discolored or
degraded.
2
Voices – Playing the keyboard –
CVP-509/505/503/501 Owner’s Manual 37
Voices
– Playing the keyboard –
The instrument features a wide variety of exceptionally
realistic instrumental Voices, including piano, guitar,
strings, brass, wind instruments and more.
1 Press one of the [A]/[B]/[F]/[G] (RIGHT 1) buttons on the Main
display.
Make sure that the PART ON/OFF [RIGHT1] button is also turned on. If it is
turned off, the right-hand part will not sound.
2 Press one of the VOICE category selection buttons to select a
Voice category and call up the Voice Selection display.
The preset Voices are categorized and contained in appropriate folders. Voice
category selection buttons on the panel correspond to the categories of the
preset Voices. For example, press the [STRINGS] button to display various
strings Voices.
Playing Preset Voices
Selecting a Voice (RIGHT 1) and playing the keyboard
NOTE
For the Voice part, see page 39.
NOTE
For more information on the VOICE
category selection buttons, refer to
page 40.
38 CVP-509/505/503/501 Owner’s Manual
Voices – Playing the keyboard –
2
3 Press one of the [A] – [J] buttons to select the desired Voice.
To call up the other display pages, press one of the [1 ] – [5 ] buttons or
press the same VOICE button again.
4 Play the keyboard.
1 Make sure that PART ON/OFF [RIGHT 1] button is turned on.
2 Press the PART ON/OFF [RIGHT 2] button to turn it on.
3 Press one of the VOICE category selection buttons to call up the
Voice Selection display for the Right 2 part.
4 Press one of the [A] – [J] buttons to select the desired Voice.
5 Play the keyboard.
The Voice selected for RIGHT 1 (page 37) and the Voice selected here are
sounded simultaneously in a layer.
NOTE
(CVP-509/505) You can call up the
information for the selected Voice by
pressing the [7 ] (INFO) button.
(Some Voices do not have the infor-
mation display.) To close the informa-
tion display, press the [EXIT] button.
NOTE
The Voice type and its defining char-
acteristics are indicated above the
Preset Voice name. For details on the
characteristics, see page 40 and the
Reference Manual.
To listen to the demo phrases for each Voice
Press the [8 ] (DEMO) button to start the Demo for the selected Voice. To
stop the demo, press the [8 ] button again.
Playing Two Voices Simultaneously
NOTE
You can save the settings to Registra-
tion Memory. See page 79.
Quickly selecting Voices for Right 1 and 2 parts
You can quickly select the Right 1 and 2 part Voices, just from the Voice cat-
egory selection buttons. Press and hold one Voice button, then press another.
The Voice of the first pressed button is automatically set for the Right 1 part,
while the Voice of the second pressed button is set for the Right 2 part.
CVP-509/505/503/501 Owner’s Manual 39
2
Voices – Playing the keyboard –
1 Make sure that the PART ON/OFF [RIGHT 1] and/or [RIGHT 2]
buttons are turned on.
2 Press the PART ON/OFF [LEFT] button to turn it on.
3 Press one of the VOICE category selection buttons to call up the
Voice Selection display for the Left part.
4 Press one of the [A] – [J] buttons to select the desired Voice.
5 Play the keyboard.
The notes you play with your left hand sound one Voice (LEFT Voice selected
above), while the notes you play with your right sound a different Voices
(RIGHT 1 and 2 Voices).
Playing Different Voices with the Left and Right Hands
NOTE
You can save the settings to Registra-
tion Memory. See page 79.
RIGHT 2 part
RIGHT 1 part
LEFT part
NOTE
To change the Split Point, press:
[FUNCTION] [C] STYLE SETTING/
SPLIT POINT/CHORD FINGERING
TAB [EE
EE
][FF
FF
] SPLIT POINT. For more
information, refer to the Reference
Manual on the website.
Keyboard Parts
Voices can be assigned independently to each of the three keyboard parts:
Right 1, Right 2 and Left. You can combine these parts by using the PART
ON/OFF buttons to create a rich, ensemble sound.
When the LEFT part is off, the RIGHT 1 and 2 Voices can be played over the
entire keyboard. When the LEFT part is on, keys lower than F#2 (the Split
Point) are set for playing the LEFT part and those higher than the Split Point
are set for playing the RIGHT 1 and 2 parts.
You can confirm the currently selected part on the Main display. (CVP-509/
505) For the part selected, “
EE
EE
” or “FF
FF
” is displayed next to the Voice name.
Upper section of the
keyboard
Lower section of the
keyboard
Split Point (F#2)
40 CVP-509/505/503/501 Owner’s Manual
Voices – Playing the keyboard –
2
• Voice Characteristics
The Voice type and its defining characteristics are indicated above the Voice
name—Live!, Cool!, Sweet!, etc. For detailed explanation, refer to the Reference
Manual.
In this section, only MegaVoice and Super Articulation Voices (SA and SA2) are
explained. These Voices have special characteristics you should be aware of, and
they require specific performance techniques to bring out all of their expressive
qualities.
MegaVoices (CVP-509/505/503)
What makes MegaVoices special is their use of velocity switching. Each velocity
range (the measure of your playing strength) has a completely different sound.
For example, a guitar MegaVoice includes the sounds of various performance
techniques. In conventional instruments, different Voices having those sounds
would be called up via MIDI and played in combination to achieve the desired
effect. However, now with MegaVoices, a convincing guitar part can be played
with just a single Voice, using specific velocity values to play the desired sounds.
Because of the complex nature of these Voices and the precise velocities need to
play the sounds, they’re not intended for playing from the keyboard. They are,
however, very useful and convenient when creating MIDI data—especially when
you want to avoid using several different Voices just for a single instrument part.
Super Articulation Voices (CVP-509/505)
The word “articulation” in music usually refers to the transition or continuity
between notes. This is often reflected in specific performance techniques, such as
staccato, legato and slur. Two types of Voices—Super Articulation (SA) Voices
and Super Articulation 2 (SA2) Voices—enable you to create these subtle
musical expressions, simply by how you play. (SA2 Voices are available only on
the CVP-509.)
• SA Voices (S.Articulation!)
The SA Voices provide many of same benefits as the MegaVoices, but with
greater playability and expressive control in real time.
For example, with the Saxophone Voice, if you play a C and then a D in a
very legato way, you will hear the note change seamlessly, as though a
saxophone player played it in a single breath. Similarly with the Concert
Guitar Voice, the D note would sound as a “hammer on,” without the string
being plucked again.
Depending on how you play, other effects such as shake or breath noises (for
the Trumpet Voice), or finger noises (for the Guitar Voice) will be produced.
Voice Types
Percussion/Drum Voices
When one of the Voices is selected from this button,
you can play various drums and percussion instru-
ments or SFX (sound effects) sounds on the key-
board. Details are given in the Drum List of the
separate Data List.
Organ Flutes Voices
(page 46)
NOTE
MegaVoices, SA and SA2 Voices are
only compatible with other models
which have those types of Voices
installed. Any Song or Style data
you’ve created on the instrument
using these Voices will not sound
properly when played back on other
instruments.
NOTE
MegaVoices, SA and SA2 Voices
sound differently depending on the
keyboard range, velocity, touch, etc.
Hence, if you apply HARMONY/ECHO
effect, change the transpose setting or
change the Voice Set parameters,
unexpected or undesired sounds may
result.
CVP-509/505/503/501 Owner’s Manual 41
2
Voices – Playing the keyboard –
• SA2 Voices (S. Articulation2!) (CVP-509)
Mainly for wind instrument Voices, a special Yamaha technology called
AEM has been used, which features detailed samples of special expressive
techniques used on those specific instruments—to bend or slide into notes, to
“join” different notes together, or to add expressive nuances at the end of a
note, etc.
You can add these articulations by playing legato or staccato, or by jumping
in pitch by around an octave. For example, using the Clarinet Voice, if you
hold a C note and play the Bb above, you’ll hear a glissando up to the Bb.
Some “note off” effects are also produced automatically when you hold a
note for over a certain time.
You can also use the pedals to add articulations to the SA and SA2 Voices (page 43).
For details on how to best play each SA and SA2 Voice, call up the information
window (pressing the [7 ] (INFO) button in the Voice Selection display).
NOTE
The characteristics of SA2 Voices
(default vibrato setting and articula-
tion effects applied by the pedals) are
effective for real-time performance;
however, these effects may not be
completely reproduced when you play
back a Song which has been recorded
using SA2 Voices.
AEM Technology
When you play the piano, pressing a “C” key produces a definite and relatively
fixed C note. When you play a wind instrument, however, a single fingering may
produce several different sounds depending on the breath strength, the note
length, the adding of trills or bend effects, and other performance techniques.
Also, when playing two notes continuously—for example “C” and “D”—these
two notes will be smoothly joined, and not sound independent as they would on a
piano.
AEM (Articulation Element Modeling) is the technology for simulating this
characteristic of instruments. During performance, the most appropriate sound
samples are selected in sequence in real time, from huge quantities of sampled
data. They are smoothly joined and sounded—as would naturally occur on an
actual acoustic instrument.
This technology to smoothly join different samples enables the application of
realistic vibrato. Conventionally on electronic musical instruments, vibrato is
applied by moving the pitch periodically. AEM technology goes much further by
analyzing and disaggregating the sampled vibrato waves, and smoothly joins the
disaggregated data in real time during your performance.
42 CVP-509/505/503/501 Owner’s Manual
Voices – Playing the keyboard –
2
The TRANSPOSE [-]/[+] buttons transpose the overall pitch of the instrument (the
keyboard sound, Style playback, Song playback, and so on) in semitone steps. Press
the [+] and [-] buttons simultaneously to instantly reset the transpose value to 0.
Transposing the Pitch of the Keyboard
NOTE
The Transpose functions do not affect
the Drum Kit or SFX Kit Voices.
NOTE
You can also change the transpose
settings in the MIXING CONSOLE
display: [MIXING CONSOLE] TAB
[EE
EE
][FF
FF
] TUNE [1 ▲▼] – [3 ▲▼]
TRANSPOSE.
NOTE
Hz (Hertz): This unit of measurement
refers to the frequency of a sound and
represents the number of times a
sound wave vibrates in a second.
Default Pitch setting
By default, the reference pitch of the entire instrument is set to 440.0 Hz, and the
scale to equal temperament. You can change the pitch and scale from [FUNC-
TION] [A] MASTER TUNE/SCALE TUNE.
You can also adjust the pitch for each part (keyboard parts, Style parts and Song
parts) on the TUNE page of the Mixing Console display (page 88).
For details, refer to the Reference Manual on the website.
CVP-509/505/503/501 Owner’s Manual 43
2
Voices – Playing the keyboard –
With the center/left pedals, you can add articulation effects and characteristic
instrument performance sounds to your playing. When you select a SA or SA2
Voice, the function of center and left pedals are switched to control articulation
effects.
Three examples of effects are introduced to the following. The applied articulation
effect differs depending on the selected Voice. For details, refer to the Information
display called up by pressing the [7 ] (INFO) button on the Voice Selection
display.
Pressing a pedal triggers different playing effects, separate from your keyboard
playing. For example, pressing a pedal for a saxophone Voice can produce breath
noises or key noises, while doing the same for a guitar Voice can produce fret
noises or body-tapping sounds. You can effectively intersperse these into the notes
as you play.
Playing the keyboard while pressing a pedal changes the nature of Voice. For
example, in the case of the nylon guitar Voice, pressing the corresponding pedal
lets you play harmonics for the guitar Voice. Releasing the pedal returns the Voice
to normal.
When an SA2 Voice is selected (CVP-509), pressing a pedal and playing/releasing
a note enables you to add articulation effects, such as bend up/down, glissando
up/down, brass fall, etc.
Adding Articulation Effects to Super Articulation Voices
CVP-501CVP-503CVP-505CVP-509
NOTE
SA2 Voices are available only on the
CVP-509. SA Voices are available
only on the CVP-509/505.
NOTE
Pedal functions are automatically
changed depending on the selected
Voice. However, if you need to, you
can lock the pedal function so that it
does not change automatically.
[FUNCTION] [D] CONTROLLER
[H] DEPEND ON R1 VOICE.
NOTE
Keeping with the realistic response of
the original instruments, the effects
applied vary depending on the range
you are playing in.
NOTE
When you select SA/SA2 Voices for
two or more keyboard parts, pressing
a pedal simultaneously affects all
parts on which SA/SA2 Voices are
selected.
44 CVP-509/505/503/501 Owner’s Manual
Voices – Playing the keyboard –
2
The instrument features a sophisticated multi-processor effect system which can add
extraordinary depth and expression to your sound.
1 Call up the operation display.
[DIRECT ACCESS] [EXIT]
2 Select the desired part for which you want to add effects.
3 Press the [VOICE EFFECT] button to call up the VOICE EFFECT
display.
Applying Voice Effects
CVP-509/505/503
CVP-501
4
123
CVP-509/505/503/501 Owner’s Manual 45
2
Voices – Playing the keyboard –
4 Use the [1 ▲▼], [3 ▲▼] – [5 ▲▼] and [I] buttons to apply effects
to the Voices.
NOTE
Portamento is a function that creates a
smooth transition in pitch from the
first note played on the keyboard to
the next.
NOTE
“DSP” stands for Digital Signal Pro-
cessor (or Processing). DSP changes
and enhances the audio signal in the
digital realm to produce a wide range
of effects.
NOTE
The effect type can be changed. On
the Voice Selection display, select
[6] (VOICE SET) TAB [E][F]
EFFECT/EQ [A]/[B] 2 DSP.
NOTE
Depending on the harmony/echo
type, harmony will be applied regard-
less of the chord played with your left
hand.
1 [1 ▲▼] LEFT HOLD This function causes the LEFT part Voice to be
held even when the keys are released. Non-
decaying Voices such as strings are held continu-
ously, while decay-type Voices such as piano
decay more slowly (as if the sustain pedal has
been pressed).
When the Left Hold is ON, an “H” indication
appears in the Main display.
2 [3
▲▼] MONO/POLY This determines whether the part’s Voice is played
monophonically (only one note at a time) or poly-
phonically. Using the MONO mode lets you play
single, lead sounds (such as brass instruments)
more realistically. It also lets you expressively
control the Portamento effect (depending on the
selected Voice) by playing legato.
3 [4
▲▼]/
[5
▲▼]
DSP/DSP
VARIATION
With the digital effects built into the instrument,
you can add ambience and depth to your music
in a variety of ways—various effect types, such
as chorus and delay are included.
• The DSP switch is used to turn the DSP (Digi-
tal Signal Processor) effect on or off for the cur-
rently selected keyboard part.
• The DSP Variation switch is used to change
between variations of the DSP effect. You could
use this while you play, for example, to change
the rotating speed (slow/fast) of the rotary
speaker effect.
4 [I] HARMONY/
ECHO
When this is set to ON, the Harmony/Echo
effects are applied to the right-hand Voices
depending on the chord played with your left
hand. For details, refer to the Reference Manual
on the website.
46 CVP-509/505/503/501 Owner’s Manual
Voices – Playing the keyboard –
2
The instrument uses advanced digital technology to recreate the legendary sound of
vintage organs. Just as on a traditional organ, you can create your own sound by
increasing and decreasing the levels of the flute footages.
1 Press the [ORGAN FLUTES] button.
The FOOTAGE Page of the Organ Flutes Voice is called up.
2 Use the [1 ▲▼] – [8 ▲▼] buttons to adjust the footage settings.
The footage settings determine the basic sound of the organ flutes.
The [1 ▲▼] buttons control two footages: 16' and 5 1/3'. Pressing the [D]
button switches between these two footages.
If you want, you can select the Organ type, change the Rotary Speaker speed
and adjust the Vibrato setting, by using the [A] – [C] and [F] – [H] buttons.
Creating Your Original Organ Flutes Voices
NOTE
The term “footage” is a reference to
the sound generation of traditional
pipe organs, in which the sound is
produced by pipes of different lengths
(in feet).
3
4
5
2
1
NOTE
About the VOLUME/ATTACK Page
and EFFECT/EQ Page, see the Refer-
ence Manual on the website.
1 [A]/[B] ORGAN TYPE Specifies the type of organ tone generation to be
simulated: Sine or Vintage.
2 [C] ROTARY SP
SPEED
Alternately switches between the slow and fast
rotary speaker speeds when a rotary speaker effect
is selected for the Organ Flutes (DSP TYPE
parameter in the EFFECT/EQ Page), and the DSP
is turned on (page 44).
3 [F] VIBRATO OFF Alternately turns the vibrato effect for the Organ
Flutes Voice ON or OFF.
[G] VIBRATO ON
4 [H] VIBRATO
DEPTH
Sets the Vibrato depth to one of three levels:
1 (low), 2 (mid), or 3 (high).
5 [I] PRESETS Opens the File Selection display of the Organ
Flute Voices for selecting a preset Organ Flutes
Voice.
CVP-509/505/503/501 Owner’s Manual 47
2
Voices – Playing the keyboard –
3 Press the [I] (PRESETS) button to call up the Organ Flutes Voice
Selection display.
4 Use the TAB [EE
EE
][FF
FF
] buttons to select the location to which your
Organ Flutes Voice will be saved.
5 Press the [6 ] (SAVE) button to call up the Save display.
6 Save your Organ Flutes Voice by following the procedure on
page 68.
CAUTION
The setting will be lost if you
select another Voice or turn the
power to the instrument off
without executing the Save
operation.
Advanced Features
Refer to the Reference Manual on the website, Chapter 2.
Selecting GM/XG or other Voices from
the Panel:
Voice Selection display [8 ](UP) [2 ]
(P2)
Selecting the Harmony/Echo type:
[VOICE EFFECT] [J] TYPE SELECT
Pitch-related settings
Fine-tuning the pitch of the entire
instrument:
[FUNCTION] [A] MASTER TUNE/SCALE
TUNE TAB [E][F] MASTER TUNE
Scale Tuning:
[FUNCTION] [A] MASTER TUNE/SCALE
TUNE TAB [E][F] SCALE TUNE
Changing the part assignment of the
TRANSPOSE buttons:
[FUNCTION] [D] CONTROLLER TAB
[E][F] KEYBOARD/PANEL [A]/[B] 2
TRANSPOSE ASSIGN
Editing Voices (Voice Set):
Voice Selection display [6 ] (VOICE SET)
Disabling automatic selection of Voice
Sets (effects, etc.):
[FUNCTION] [E] REGIST SEQUENCE/
FREEZE/VOICE SET TAB [E][F] VOICE
SET
Editing Organ Flutes parameters:
[ORGAN FLUTES] TAB [E][F] VOLUME/
ATTACK or EFFECT/EQ
48 CVP-509/505/503/501 Owner’s Manual
Styles – Playing Rhythm and Accompaniment –
3
Styles
– Playing Rhythm and Accompaniment –
The instrument features a variety of accompaniment and
rhythmic backing patterns (called “Styles”) in a variety of
different musical genres including pop, jazz, and many
others. The Style features Auto Accompaniment, letting
you produce automatic accompaniment playback simply
by playing “chords” with your left hand. This lets you
automatically recreate the sound of a full band or
orchestra—even if you’re playing by yourself.
Rhythm is one of the most important parts of a Style. Try to play the melody along
with just the rhythm. You can sound different rhythms for each Style. Keep in mind,
however, that not all Styles contain rhythm channels.
1 Press one of the STYLE category selection buttons to call up
the Style Selection display.
2 Press one of the [A] – [J] buttons to select the desired Style.
Pressing one of the [1] – [4] buttons or pressing the same STYLE button
again can call up the other display page.
3 Confirm that the [ACMP ON/OFF] button is off.
Playing Only the Rhythm Channels of a Style
NOTE
The rhythm does not sound for some
Styles. When you want to use any of
these Styles, always make sure that
[ACMP ON/OFF] is turned on.
CVP-509/505/503/501 Owner’s Manual 49
Styles – Playing Rhythm and Accompaniment –
3
4 Press the STYLE CONTROL [START/STOP] button to play back
the rhythm channels.
Try playing the keyboard along with the rhythm.
To stop the rhythm, press the STYLE CONTROL [START/STOP] button again.
1 Select a Style (steps 1 – 2 on page 48).
2 Press the [ACMP ON/OFF] button to turn on the Auto
Accompaniment.
The specific left-hand section of the keyboard (page 39) becomes the Chord
section, and chords played in this section are automatically detected and used as
a basis for fully automatic accompaniment with the selected Style.
3 Press the [SYNC START] button to enable synchronized start.
4 As soon as you play a chord with your left hand, the selected
Style starts.
Try playing chords with your left hand and play melody with your right hand.
5 Press the [START/STOP] button to stop Style playback.
Playing a Style with the Auto Accompaniment
NOTE
For information on chords, see page 51.
NOTE
You can transpose the Style (accompani-
ment). See page 42.
50 CVP-509/505/503/501 Owner’s Manual
Styles – Playing Rhythm and Accompaniment –
3
Style Characteristics
The Style type and its defining characteristics are indicated on the Preset
Style icon.
Pro (P): These Styles provide professional and exciting arrangements
combined with perfect playability. The resulting accompaniment exactly
follows the chords of the player. As a result, your chord changes and col-
orful harmonies are instantly transformed into lifelike musical accompani-
ment.
Session (S): These Styles provide even greater realism and authentic back-
ing by mixing in original chord types and changes, as well as special riffs
with chord changes, with the Main sections. These have been programmed
to add “spice” and a professional touch to your performances of certain
songs and in certain genres. Keep in mind, however, that the Styles may
not necessarily be appropriate—or even harmonically correct-for all songs
and for all chord playing. In some cases for example, playing a simple
major triad for a country song may result in a “jazzy” seventh chord, or
playing an on-bass chord may result in inappropriate or unexpected
accompaniment.
Free Play (F) (CVP-509/505): These Styles are characterized by rubato
performance. You can perform freely with remarkably expressive accom-
paniment, without being constrained by a strict tempo.
Pianist (P): These special Styles provide piano-only accompaniment. Just
by playing the proper chords with your left hand, you can automatically
add complicated, professional-sounding arpeggios and bass/chord pat-
terns.
Style file compatibility
The CVP-509/505/503/501 uses the SFF GE file format (page 9). The CVP-
509/505/503/501 can play back existing SFF files, but they will be saved in
the SFF GE format when the file is saved (or pasted) in the CVP-509/505/
503/501. Please keep in mind that the saved file can only be played back on
instruments that are compatible with the SFF GE format.
CVP-509/505/503/501 Owner’s Manual 51
Styles – Playing Rhythm and Accompaniment –
3
For users who are unfamiliar with chords, this handy chart features common chords for your quick
reference. Since there are many useful chords and many different ways to use them musically, refer to
commercially available chord books for further details.
Indicates the root note.
Changing the Chord Fingering Type
By changing the chord fingering type, you can automatically produce appropriate accompaniment even
if you don’t press all of the notes which comprise a chord. Chord fingering type can be changed from:
[FUNCTION] [C] STYLE SETTING/SPLIT POINT/CHORD FINGERING TAB [EE
EE
][F]
CHORD FINGERING.
Following types can be selected, for example.
• Single Finger
This method lets you easily play chords in the accompaniment range of the keyboard using only one,
two or three fingers.
AI Full Keyboard
Playing just about anything, anywhere on the keyboard using both hands – like playing the piano –
produces appropriate accompaniment. You don’t have to worry about specifying the chords. (Depending
on the song arrangement, AI Full Keyboard may not always produce appropriate accompaniment.)
For other types, refer to the Reference Manual on the website.
Chords
Major
Minor
Seventh Minor Seventh
Major Seventh
Major chord
Press the root key only.
Minor chord
Simultaneously press
the root key and a black
key to its left.
Seventh chord
Simultaneously press
the root key and a
white key to its left.
Minor seventh chord
Simultaneously press
the root key and both a
white and black key to
its left.
52 CVP-509/505/503/501 Owner’s Manual
Styles – Playing Rhythm and Accompaniment –
3
• [START/STOP] button
• [SYNC START] button
• [SYNC STOP] button
• INTRO [I] – [III] buttons
• ENDING/rit. [I] – [III] buttons
Operating Style Playback
To Start/Stop Playing
Style starts playing back as soon as the [START/STOP] but-
ton is pressed. To stop playback, press the button again.
This puts the Style playback in “standby.” The Style starts
playing back when you press any note on the keyboard (when
[ACMP ON/OFF] is off) or you play a chord with your left
hand (when [ACMP ON/OFF] is on). During the Style play-
back, pressing this button stops playing and puts the playback
in “standby.
NOTE
When the fingering mode is set to
“Full Keyboard” or “AI Full Key-
board,” Synchro Stop cannot be
turned on.
To change the fingering mode:
[FUNCTION] [C] STYLE SETTING/
SPLIT POINT/CHORD FINGERING
TAB [E][F] CHORD FINGERING.
You can start and stop the Style anytime you
want by simply playing or releasing the keys
in the chord section of the keyboard. Make
sure that the [ACMP ON/OFF] button is on,
press the [SYNC STOP] button, then play the
keyboard.
The instrument features three different Intro sections to add an
introduction before starting the Style playback. After pressing
one of the INTRO [I] – [III] buttons, start playback by using the
[START/STOP] button or [SYNC START] button. When the
Intro finishes playing, the Style playback automatically shifts to
the Main section.
The instrument features three different Ending sections to add an
ending before stopping Style playback. When you press one of
the ENDING [I] – [III] buttons while Style is playing back, the
Style will automatically stop after the ending is played. You can
have the ending gradually slow down (ritardando) by pressing
the same ENDING button once again, while the ending is
playing.
NOTE
If you press the ENDING/rit. [I] button
when the Style is playing, a fill-in
automatically plays before the END-
ING/rit [I].
About the lamp status of the section buttons (INTRO/MAIN VARIA-
TION/BREAK/ENDING)
Red: The section is currently selected.
Red (flashing): The section will be played next, following the currently selected
section.
*The Main [A]-[D] buttons also flash red during fill-in playback.
Green: The section contains data but not currently selected.
Off: The section contains no data and cannot be played.
CVP-509/505/503/501 Owner’s Manual 53
Styles – Playing Rhythm and Accompaniment –
3
Each Style features four different Main sections, four Fill-in sections and a Break
section. By using these sections effectively, you can easily make your performance
sound more dynamic and professional. The section can be freely changed while the
Style is playing back.
• [BREAK] button
• TEMPO [-]/[+] buttons
By pressing the TEMPO [-] or [+] button, you can decrease/increase the tempo over
a range of 5 – 500. While the TEMPO pop-up is shown on the display, you can also
use the [DATA ENTRY] dial to adjust the value.
Pressing the TEMPO [-]/[+] buttons simultaneously resets the tempo to the default
value.
• [TAP TEMPO] button
Changing Pattern Variation (Sections) During Style playback
AUTO FILL function
When the [AUTO FILL IN] button is turned on, pressing any of the
Main [A] – [D] buttons as you play automatically plays fill-in section.
Adjusting the Tempo
Selected Main section’s
lamp is lit in red
• MAIN VARIATION [A] – [D] buttons
Press one of the MAIN VARIATION [A] – [D] buttons to select the desired Main
section (the button lights in red). Each is an accompaniment pattern of a few mea-
sures and it plays indefinitely. Pressing the selected MAIN VARIATION button
again plays an appropriate fill-in pattern to spice up the rhythm and break the rep-
etition. After the fill-in finishes playing, it leads smoothly into the Main section.
Selected Fill In section’s
lamp flashes in red
This lets you add dynamic breaks in the rhythm of the accompa-
niment. Press the [BREAK] button during Style playback. When
the one-measure Break pattern finishes playing, the Style play-
back automatically shifts to the Main section.
During Style playback, you can change the tempo by tapping
the [TAP TEMPO] button twice at the desired tempo.
When the Style is stopped, tapping the [TAP TEMPO] button
(four times for a 4/4 time signature) starts Style playback at the
tempo you tapped.
54 CVP-509/505/503/501 Owner’s Manual
Styles – Playing Rhythm and Accompaniment –
3
The convenient Repertoire function automatically calls up the most appropriate
panel settings (Voice number, etc.) for the currently selected Style.
1 Select the desired Style from the Style Selection display (steps 1
– 2 on page 48).
2 Press the [5 ] (REPERTOIRE) button.
Various appropriate panel settings matching the selected Style will be shown in
the display.
3 Use the [2 ▲▼] – [3 ▲▼] buttons to select the desired panel
setting.
Calling up the Panel Settings to Match the Style (Repertoire)
Before using the Repertoire function, you need to import Music Finder
records (see instructions on page 73).
NOTE
The settings shown here are Music
Finder Records. You can choose addi-
tional settings by using the Music
Finder feature (page 76).
3
NOTE
Depending on the particular selected
Style, there may not be any panel set-
tings in the Repertoire function.
CVP-509/505/503/501 Owner’s Manual 55
Styles – Playing Rhythm and Accompaniment –
3
One Touch Setting is a powerful and convenient feature that automatically calls up
the most appropriate panel settings (Voices or effects, etc.) for the currently selected
Style, with the touch of a single button. If you’ve already decided which Style you
wish to use, you can have One Touch Setting automatically select the appropriate
Voice for you.
1 Select a Style (steps 1 – 2 on page 48).
2 Press one of the ONE TOUCH SETTING [1] – [4] buttons.
Not only does this instantly call up all the settings (Voices, effects, etc.) that
match the current Style, it also automatically turns on ACMP and SYNC
START, so that you can immediately start playing the Style.
3 As soon as you play a chord with your left hand, the selected
Style starts.
Each Style has four One Touch Setting setups. Press other ONE TOUCH
SETTING [1] – [4] button to try out other setups.
Appropriate Panel Settings for the Selected Style (One Touch Setting)
NOTE
You can also create your own One
Touch Setting setups. For details,
refer to the Reference Manual on the
website.
NOTE
You can change the timing in which
the One Touch Settings change with
MAIN VARIATION [A] – [D] change.
Refer to the Reference Manual on the
website.
Automatically changing One Touch Settings with the Main sections
The convenient OTS (One Touch Setting) Link function lets
you automatically have One Touch Settings change when you
select a different Main section (A – D). The Main sections A,
B, C and D correspond to One Touch Settings 1, 2, 3 and 4
respectively. To use the OTS Link function, turn the [OTS
LINK] button on.
56 CVP-509/505/503/501 Owner’s Manual
Styles – Playing Rhythm and Accompaniment –
3
You can check the information of the One Touch Setting [1] – [4] assigned to
currently selected Style.
1 In the Style Selection display, press the [7 ] (OTS INFO.) button
to call up the Information display.
2 Press the [F] (CLOSE) button to close the Information display.
Confirming the One Touch Setting contents
NOTE
You can also call up the Information
display by pressing the [DIRECT
ACCESS] button then pressing one of
the ONE TOUCH SETTING [1] – [4]
buttons.
2
CVP-509/505/503/501 Owner’s Manual 57
Styles – Playing Rhythm and Accompaniment –
3
A Style contains eight channels: RHY1 (Rhythm 1) – PHR2 (Phrase 2) below. You
can add variations and change the feeling of a Style by selectively turning channels
on/off as the Style plays.
1 Press the [CHANNEL ON/OFF] button once or twice to call up
the CHANNEL ON/OFF (STYLE) display.
2 Press the [1 ] – [8 ] buttons to turn the channels on or off.
To listen to only one channel by itself, hold down the appropriate button for the
channel to set the channel to SOLO. To cancel SOLO, simply press the
appropriate channel button again.
3 Press the [EXIT] button to close the CHANNEL ON/OFF display.
Turning Style Parts On/Off and Changing Voices
Style channels
RHY1/2 (Rhythm 1/2): These are the basic parts of the Style, containing
the drum and percussion rhythm patterns.
•BASS: The bass part uses various appropriate instrument sounds to match
the Style.
CHD1/2 (Chord 1/ 2): These are the rhythmic chord backing, commonly
used with piano or guitar Voices.
•PAD: This part is used for sustained instruments such as strings, organ,
choir, etc.
PHR1/2 (Phrase1/2): These parts are used for punchy brass stabs, arpeg-
giated chords, and other extras that make the accompaniment more inter-
esting.
2
NOTE
You can save the settings here to Reg-
istration Memory. See page 79.
Changing the Voice for each channel
If necessary, press the [1 ] – [8 ] buttons to change the Voice for the cor-
responding channel.
The Voice Selection display is called up from which you can select the Voice
to be used for the channel. See page 37.
58 CVP-509/505/503/501 Owner’s Manual
Styles – Playing Rhythm and Accompaniment –
3
You can adjust the volume balance between Style playback and the sound you play
on the keyboard.
1 Call up the Main display.
[DIRECT ACCESS] [EXIT]
(CVP-509/505/503) The Balance display is indicated at the bottom of the Main
display.
(CVP-501) Open the Balance display by pressing the [C] button.
2 Adjust the Style volume by using the [2 ▲▼] buttons and the
keyboard volume by using the [5
▲▼] – [7 ▲▼] buttons.
Using the [1 ▲▼] – [7 ▲▼] buttons, you can adjust the volume of Song, Style,
MIC (for the CVP-509/505/503) and keyboard parts.
Adjusting the Volume Balance Between the Style and Keyboard
NOTE
(CVP-509/505/503) When the Bal-
ance display is not indicated, press
the [EXIT] button.
NOTE
In the Mixing Console display, you
can adjust the volume for each Style
part. See page 91.
Advanced Features
Refer to the Reference Manual on the website, Chapter 3.
Selecting the Chord Fingering type:
[FUNCTION] [C] STYLE SETTING/
SPLIT POINT/CHORD FINGERING
TAB [E][F] CHORD FINGERING
Style playback related settings:
[FUNCTION] [C] STYLE SETTING/
SPLIT POINT/CHORD FINGERING
TAB [E][F] STYLE SETTING
Split Point settings:
[FUNCTION] [C] STYLE SETTING/
SPLIT POINT/CHORD FINGERING
TAB [E][F] SPLIT POINT
Memorizing the Original One Touch Setting:
[MEMORY] + ONE TOUCH SETTING [1]
– [4]
Creating/Editing Styles (Style Creator):
[FUNCTION] [F] DIGITAL REC MENU
[B] STYLE CREATOR
Realtime Recording:
TAB [E][F] BASIC
Step Recording:
TAB [E][F] EDIT [G] STEP REC
Style Assembly:
TAB [E][F] ASSEMBLY
Editing the Rhythmic Feel:
TAB [E][F] GROOVE
Editing Data for Each Channel:
TAB [E][F] CHANNEL
Making Style File Format Settings:
TAB [E][F] PARAMETER
Adjust the Style
volume
Adjust the the sound you
play on the keyboard
CVP-509/505/503/501 Owner’s Manual 59
Songs – Playing, Practice and Recording Songs –
4
Songs
– Playing, Practice and Recording Songs –
For the Clavinova, “Song” refers to the MIDI songs
which include preset songs, commercially available
MIDI format files, etc. Not only can you play back a
Song and listen to it, but you can also play the keyboard
along with Song playback and record your own
performance as a Song.
You can play back the following types of Songs.
• Preset Songs (in the PRESET Page of the Song Selection display)
Your own recorded Songs (see page 66 for instructions on recording)
• Commercially available Song data: SMF (Standard MIDI File) or ESEQ
1 Press the [SONG SELECT] button to call up the Song Selection
display.
2 Press the TAB [EE
EE
][F] buttons to select the location of the
desired Song.
If you want to playback of Song in the USB storage device, connect the USB
storage device containing MIDI Song data to the [USB TO DEVICE] terminal
beforehand.
3 If you select “PRESET” tab in step 2, select a Song category by
using the [A] – [J] buttons.
The preset Songs are categorized and contained in appropriate folders.
4 Select the desired Song by using the [A] – [J] buttons.
You can also select a Song by using the [DATA ENTRY] dial, then press the
[ENTER] button to execute.
Playback of Songs
NOTE
For information on compatible data
formats, refer to page 9.
NOTE
You can instantly jump back to the
Main display by “double-clicking” on
one of the [A] – [J] buttons.
60 CVP-509/505/503/501 Owner’s Manual
4
Songs – Playing, Practice and Recording Songs –
5 Press the SONG [PLAY/PAUSE] button to start playback.
6 Press the SONG [STOP] button to stop playback.
• Synchro Start
You can start playback as soon as you start playing the keyboard. While playback
is stopped, hold down the SONG [STOP] button and press the [PLAY/PAUSE]
button.
To cancel the Synchro Start function, hold down the SONG [STOP] button and
press the [PLAY/PAUSE] button once again.
• Pause
Press the [PLAY/PAUSE] button. Pressing it again resumes Song playback from
the current position.
Queuing the next Song for playback
While a Song is playing back, you can queue up the next Song for playback.
This is convenient for chaining it to the next Song smoothly during stage
performance. Select the Song you want play next in the Song Selection
display, while a Song is playing back. The “NEXT” indication appears at the
upper right of the corresponding Song name. To cancel this setting, press the
[8] (NEXT CANCEL) button.
Operations During Playback
CVP-509/505/503/501 Owner’s Manual 61
Songs – Playing, Practice and Recording Songs –
4
• Rewind/Fast Forward
Press the [REW] or [FF] button once to move back/forward one measure. Hold the
[REW] or [FF] button to scroll backward/forward continuously.
Pressing the [REW] or [FF] button calls up a pop-up window showing the current
measure number (or Phrase Mark number) in the display. While the Song Position
pop-up is shown on the display, you can also use the [DATA ENTRY] dial to adjust
the value.
• Adjusting the Tempo
Same procedure as with Style tempo. See page 53.
NOTE
Phrase Mark is a pre-programmed
marker in a certain Song data, which
specifies a certain location in the
Song.
For Songs containing Phrase Marks
For Songs not containing Phrase Marks
You can switch between BAR and PHRASE
MARK by pressing the [E] button.
NOTE
You can adjust the Song volume bal-
ance between the Song and Keyboard.
See page 58. In the Mixing Console
display, you can adjust the volume for
each Song part. See page 91.
NOTE
You can also turn the specific part(s)
on or off. See page 64.
NOTE
You can transpose the Song playback.
See page 42.
Restrictions for protected Songs
Commercially available Song data may be copy protected to prevent illegal
copying or accidental erasure. They are marked by the indications at the upper
left side of the file names. The indications and relevant restrictions are detailed
below.
Prot. 1: Indicates Preset Songs saved to the User tab display and Disklavier
Piano Soft Songs. These cannot be copied/moved/saved to external devices.
•Prot. 2 Orig: Indicates Yamaha-protection-formatted Songs. These cannot be
copied. These can be moved/saved only to the User drive and USB storage
devices with ID.
•Prot. 2 Edit: Indicates edited “Prot. 2 Orig” Songs. Make sure to save these to
the same folder containing the corresponding “Prot. 2 Orig” Song. These cannot
be copied. These can be moved/saved only to the User drive and USB storage
devices with ID.
Note for “Prot. 2 Orig” and “Prot. 2 Edit” Song file operation
Make sure to save the “Prot. 2 Edit” Song to the same folder containing its
original “Prot. 2 Orig” Song. Otherwise the “Prot. 2 Edit” Song cannot be
played back. Also, if you move a “Prot. 2 Edit” Song, be sure to move its
original “Prot. 2 Orig” Song to the same location (folder) at the same time.
For information about compatible USB storage devices for saving protected
Songs, visit the Yamaha website.
62 CVP-509/505/503/501 Owner’s Manual
4
Songs – Playing, Practice and Recording Songs –
You can view the music notation (score) of the selected Song. We suggest that you
read through the music notation before starting to practice.
1 Select a Song (steps 1 – 4 on page 59).
2 Press the [SCORE] button to call up the Score display.
You can look through the entire notation by using the TAB [E][F] buttons
when the Song playback is stopped.
As starting playback, the “ball” bounces along through the score, indicating the
current position.
You can change the displayed notation style by using the [1 ▲▼] – [8 ▲▼]
buttons. For details, refer to the Reference manual on the website.
Displaying Music Notation (Score)
NOTE
The instrument can display the music
notation of commercially-available
music data or your recorded Songs.
NOTE
The displayed notation is generated
by the instrument based on the Song
data. As a result, it may not be exactly
the same as commercially available
sheet music of the same song —
especially when displaying notation
of complicated passages or many
short notes.
CVP-509/505/503/501 Owner’s Manual 63
Songs – Playing, Practice and Recording Songs –
4
When the selected Song contains lyric data, you can view it on the instrument’s
display during playback.
1 Select a Song (steps 1 – 4 on page 59).
2 Press the [LYRICS/TEXT] button (CVP-509/505/503) / [LYRICS]
button (CVP-501) to call up the Lyrics display.
When the Song data contains lyrics data, the lyrics are shown on the display.
You can look through the entire lyrics by using the TAB [E][F] buttons when
the Song playback is stopped.
As Song playback starts, the color of the lyrics changes, indicating the current
position.
Even if the Song doesn’t contain lyrics data, you can view the lyrics on the display
by loading the text file (.txt) created on a computer via USB storage device. This
feature enables various useful possibilities, such as the showing of lyrics, chord
names, and text notes.
1 When the Lyrics display is shown, press the [1 ▲▼] (TEXT)
button to display the text.
2 Press the [5 ▲▼]/[6 ▲▼] (TEXT FILE) button to call up the Text
selection display.
3 Select the desired text file.
To return to the Lyrics display, press the [1 ▲▼] (LYRICS) button again.
For more information about the Lyrics/Text display, refer to the Reference manual
on the website.
Displaying Lyrics (Text)
Displaying Text
CVP-509/505/503
CVP-501
CVP-501CVP-503CVP-505CVP-509
NOTE
(CVP-509/505) The Lyrics (text) can
be displayed on the external monitor.
See page 101.
64 CVP-509/505/503/501 Owner’s Manual
4
Songs – Playing, Practice and Recording Songs –
A Song consists of 16 separate channels. You can independently turn each channel of
the selected Song playback on or off.
1 Press the [CHANNEL ON/OFF] button once or twice to call up
the CHANNEL ON/OFF (SONG) display.
2 Use the [1 ▲▼] – [8 ▲▼] button to turn each channel on or off.
If you want to play back only one particular channel (solo playback), press and
hold down one of the [1 ▲▼] – [8 ▲▼] buttons corresponding to the desired
channel. Only the selected channel is turned to on and others are off. To cancel
solo playback, press the same button again.
The key guide lamps indicate the notes you should play, when you should play them,
and how long you should hold them down.You can also practice at your own pace —
since the accompaniment waits for you to play the notes correctly. Here, mute the
right-hand part and try practicing the part using the guide lamps.
1 Select a Song and call up the Score display (page 62).
2 Turn the [GUIDE] button on.
3 Press the [TRACK 1 (R)] button to mute the right-hand part.
The indicator of the [TRACK 1 (R)] button goes out. You can now play that part
by yourself.
4 Press the SONG [PLAY/PAUSE] button to start playback.
Practice the muted part using the guide lamps.
After your practice, turn the [GUIDE] button off.
Turning Song Channels On/Off
One-handed Practice with the Guide Lamps
2
NOTE
The guide lamps light in red for the
white keys and green for the black
keys.
NOTE
Usually, CH 1 is assigned to [TRACK
1 (R)] button, CH 2 is assigned to
[TRACK 2 (L)] button, and CH 3 – 16
are assigned to the [EXTRA TRACKS]
button.
CVP-509/505/503/501 Owner’s Manual 65
Songs – Playing, Practice and Recording Songs –
4
The Song Repeat functions can be used to repeatedly play back a Song or a specific
range of measures in a Song. This is useful for repeated practicing of difficult-to-
play phrases.
To repeat a Song, turn the [REPEAT] button on and playback the desired Song.
Turning the [REPEAT] button off cancels Repeat playback.
1 Select a Song (steps 1 – 4 on page 59).
2 Press the SONG [PLAY/PAUSE] button to start playback.
3 Specify the repeat range.
Press the [REPEAT] button at the starting point (A) of the range to be repeated.
Press the [REPEAT] button again at the ending point (B). After an automatic
lead-in (to help guide you into the phrase), the range from Point A to Point B is
played back repeatedly.
4 To stop playback, press the SONG [STOP] button.
The Song position will return to Point A.
5 Press the [REPEAT] button to turn off Repeat playback.
Other guide functions
There are additional functions in the Guide features, for practicing the tim-
ing of playing the keys (Any Key mode) or for Karaoke.
[FUNCTION] [B] SONG SETTING [A]/[B] GUIDE MODE
For more information, refer to the Reference Manual on the website.
Repeat Playback
NOTE
You can play multiple Songs repeat-
edly: [FUNCTION] [B] SONG SET-
TING [H] REPEAT MODE.
Specifying a Range of Measures and Playing them
Back Repeatedly (A-B Repeat)
NOTE
Specifying only Point A results in
repeat playback between Point A and
the end of the Song.
NOTE
When you want to repeat from the top
of the song to middle of the song:
1 Press the [REPEAT] button, then
start Song playback.
2 Press the [REPEAT] button again at
the ending point (B).
AB
Top of the song
End of the song
Specifying the repeat range while Songs are stopped
1. Press the [FF] button to advance to the Point A location.
2. Press the [REPEAT] button to specify Point A.
3. Press the [FF] button to advance to the Point B location.
4. Press the [REPEAT] button again to specify Point B.
66 CVP-509/505/503/501 Owner’s Manual
4
Songs – Playing, Practice and Recording Songs –
You can record all parts of your performance at once or each part (right-hand, left-
hand and Style playback) independently. This is an effective practice tool, allowing
you to easily compare your own performance to the original song you are practicing.
Before starting recording, make the desired panel settings for your keyboard
performance — selecting a Voice, Style, etc.
1 Press the SONG [REC] button and the [STOP] button
simultaneously.
A blank Song for recording is automatically set.
2 Press the SONG [REC] button.
3 Start recording.
Recording begins automatically as soon as you play a note on the keyboard or
start Style playback.
4 Press the SONG [STOP] button to stop recording.
A message prompting you to save the recorded performance appears. To close
the message, press the [EXIT] button.
5 Press the SONG [PLAY/PAUSE] button to play back the recorded
performance.
Recording Your Performance (Quick Recording)
Recording a specific part
In place of step 2, pressing the SONG [TRACK 1 (R)] (or [TRACK 2 (L)])
button while holding the [REC] button enables you to record only the right-
hand (or left-hand) part.
Pressing the [EXTRA TRACKS] button while holding the [REC] button
enables recording of only Style playback.
NOTE
For Quick Recording, each part will be
recorded to the following channels.
Keyboard parts: Ch. 1-3
Style parts: Ch. 9-16
CVP-509/505/503/501 Owner’s Manual 67
Songs – Playing, Practice and Recording Songs –
4
6 Save the recorded performance as a Song.
Press the [SONG SELECT] button to call up the Song Selection display. The
recorded Song can be saved in the Song Selection display. Refer to “Saving
Files” on page 68 for instructions.
CAUTION
The recorded Song will be lost if
you change to another Song or
you turn the power off without
executing the save operation.
Multi Track Recording
A Song consists of 16 separate channels. With this method, you can record
data to each channel independently, one by one. You can also freely change
the channel/part assignments with the Multi Track recording.
The procedure is basically the same as that of “Recording Your Performance
(Quick Recording)” on page 66, with the following instructions substituted
for step 2 above.
While holding down the SONG [REC] button, press the [1 ▲▼] – [8 ▲▼]
buttons to set the desired channels to “REC. Then assign the desired
part to the channel by using the [C]/[D] buttons.
If you want to record the Right 1 part to channel 1, for example, press the
[1 ] button while holding down the [REC] button to set the channel 1 to
“REC.” Then use the [C]/[D] buttons to select “RIGHT 1.
After proceeding with steps 3 – 5, re-select other channels and record other
parts as desired.
68 CVP-509/505/503/501 Owner’s Manual
4
Songs – Playing, Practice and Recording Songs –
This operation lets you save your original data (such as Songs you’ve recorded and
Voices you’ve edited) to a file. The explanations here apply when you save your
recorded performance as a Song file.
1 In the file selection display, select the appropriate tab (USER or
USB) to which you want to save the data by using the TAB
[EE
EE
][FF
FF
] buttons.
2 Press the [6 ] (SAVE) button to call up the file naming display.
3 Enter the file name (page 27).
Even if you skip this step, you can rename the file at any time after saving
(page 70).
4 Press the [8 ] (OK) button to save the file.
The saved file will be automatically located at the appropriate position among
the files in alphabetical order.
Saving Files
1
2
NOTE
If you want to cancel the Save opera-
tion, press the [8 ] (CANCEL) but-
ton.
CVP-509/505/503/501 Owner’s Manual 69
Songs – Playing, Practice and Recording Songs –
4
If you’ve saved a lot of files to a USB flash memory or USER drive, it may be
difficult to find the desired file quickly. To make it easier to find the files you want,
you can organize your files in folders, rename the files, delete unnecessary files, etc.
These operations are done in the File Selection display.
This operation lets you create new folders. Folders can be created, named and
organized as desired, making it easier to find and select your original data.
1 In the file selection display, select the appropriate tab (USER or
USB) to which you want to save the data by using the TAB
[EE
EE
][FF
FF
] buttons.
If you want to create a new folder within the existing folder, also select the
folder here.
2 Press the [7 ] (FOLDER) button to call up the naming display
for a new folder.
3 Input the name of the new folder (see page 27).
File Management
NOTE
A new folder cannot be made in the
PRESET tab.
Creating a New Folder
NOTE
The maximum number of files/folders
which can be stored in a folder is 250.
NOTE
In the USER tab display, folder direc-
tories can contain up to four levels.
The maximum total number of files/
folders which can be stored differs
depending on the file size and the
length of the file/folder names.
1
2
NOTE
The following marks cannot be
entered for a file/folder name.
¥ / : * ? " < > |
70 CVP-509/505/503/501 Owner’s Manual
4
Songs – Playing, Practice and Recording Songs –
This operation lets you rename files/folders.
1 Call up the display containing the file/folder you want to rename.
2 Press the [1 ] (NAME) button.
The pop-up window for the Rename operation appears at the bottom of the
display.
3 Press one of the [A] – [J] buttons corresponding to the desired
file/folder.
4 Press the [7] (OK) button to confirm the file/folder selection.
5 Input the name (characters) of the selected file or folder
(page 27).
The renamed file/ folder appears on the display at the appropriate position
among the files in alphabetical order.
This operation lets you copy or cut a file and paste it to another location (folder).
You can also copy a folder (but not move it) by using the same procedure.
1 Call up the display containing the file/folder you want to copy.
2 Press the [3 ] (COPY) button to copy or [2 ] (CUT) to move.
The pop-up window for the Copy/Cut operation appears at the bottom of the
display.
Renaming Files/Folders
NOTE
Files in the PRESET tab cannot be
renamed.
NOTE
To cancel the Rename operation,
press the [8 ] (CANCEL) button.
Copying or Moving Files
NOTE
Files in the PRESET tab cannot be
moved. They can only be copied.
Copy
Cut
CVP-509/505/503/501 Owner’s Manual 71
Songs – Playing, Practice and Recording Songs –
4
3 Press one of the [A] – [J] buttons corresponding to the desired
file/folder.
To cancel the selection, press the same [A] – [J] button again.
Press the [6 ] (ALL) button to select all files/folders indicated on the current
display including the other pages. To cancel the selection, press the [6 ] (ALL
OFF) button again.
4 Press the [7 ] (OK) button to confirm the file/folder selection.
5 Select the destination tab (USER or USB) to paste the file/folder,
by using the TAB [EE
EE
][FF
FF
] buttons.
If necessary, select the destination folder by using the [A] – [J] buttons.
6 Press the [4 ] (PASTE) button to paste the file/folder selected
in step 3.
The pasted file/folder appears on the display at the appropriate position among
the files in alphabetical order.
This operation lets you delete a file/folder.
1 Call up the display containing the file/folder you want to delete.
2 Press the [5 ] (DELETE) button.
The pop-up window for the Delete operation appears at the bottom of the
display.
3 Press one of the [A] – [J] buttons corresponding to the desired
file/ folder.
To cancel the selection, press the same [A] – [J] button again.
Press the [6 ] (ALL) button to select all files/folders indicated on the current
display including the other pages. To cancel the selection, press the [6 ] (ALL
OFF) button again.
4 Press the [7 ] (OK) button to confirm the file/folder selection.
5 Follow the on-display instructions.
• YES Delete the file/folder
• YES ALL Delete all selected files/folders
• NO Leave the file/folder as is without deleting
• CANCEL Cancel the Delete operation
NOTE
To cancel the Copy operation, press
the [8 ] (CANCEL) button.
Deleting Files/Folders
NOTE
Files in the PRESET tab cannot be
deleted.
NOTE
To cancel the Delete operation, press
the [8 ] (CANCEL) button.
72 CVP-509/505/503/501 Owner’s Manual
4
Songs – Playing, Practice and Recording Songs –
Advanced Features
Refer to the Reference Manual on the website, Chapter 4.
Editing Music Notation settings:
[SCORE] [1 ▲▼] – [8 ▲▼] buttons
Editing Lyrics/Text display settings (CVP-509/505/503):
[LYRICS/TEXT] [1 ▲▼] – [8 ▲▼] buttons
Using the Auto Accompaniment
Features with the Song Playback:
[ACMP ON/OFF] STYLE CONTROL
[SYNC START] SONG [STOP] + [PLAY/
PAUSE] STYLE CONTROL [START/
STOP]
Song Playback related parameters:
[FUNCTION] [B] SONG SETTING
•Keyboard and Vocal Practice Using
the Guide Function:
[A]/[B] GUIDE MODE
Playing Backing Parts with the Perfor-
mance Assistant Technology:
[8 ▲▼] P.A.T.
Creating/Editing Songs
(Song Creator):
[FUNCTION] [F] DIGITAL REC MENU
[A] SONG CREATOR
Recording Melodies (Step Recording):
TAB [E][F] 1-16
Recording Chords (Step Recording):
TAB [E][F] CHORD
Re-Recording a Specific Section—
Punch In/Out:
TAB [E][F] REC MODE
Editing Channel Events:
TAB [E][F] CHANNEL
Editing Chord events, Notes, System
Exclusive events and Lyrics:
TAB [E][F] CHORD, 1-16, SYS/EX.
or LYRICS
5
Music Finder – Calling Up Ideal Setups (Voice, Style, etc.) for Each Song –
CVP-509/505/503/501 Owner’s Manual 73
Music Finder
– Calling Up Ideal Setups (Voice, Style, etc.) for Each Song –
If you want to play in a certain genre of music but don’t
know which Style and Voice settings would be
appropriate, the convenient Music Finder function can
help you out. Simply select the desired music genre (or
song title) from among the Music Finder panel settings,
and the instrument automatically makes all appropriate
panel settings to let you play in that music style.
Moreover, by registering the Song/Audio data saved in
various places into Music Finder, the instrument can
easily call up the relevant data from the song title. The
Music Finder Plus function gives you the added
capability, by connecting the instrument to the Internet,
of searching for and adding desired panel settings and
song data via the Internet to the instrument.
NOTE
Before using a USB storage device, be
sure to read “Connecting a USB Stor-
age Device” on page 106.
CAUTION
Replacing automatically over-
writes all your records (panel
settings/song data shown in the
MUSIC FINDER display). Make
sure that all important data has
been saved to the USER or USB
in the File Section display (step
4 as described at left).
Loading panel settings from the website
As a factory default, some sample records (panel settings) are provided in the Music
Finder. By downloading many panel settings from Yamaha website and importing
them to the instrument, you can use the Music Finder function more conveniently and
effectively. Moreover, the Repertoire function (page 54) can also be enhanced by
importing the panel settings. Before using the Music Finder function, we recommend
that you load the panel settings from the website following the instructions below.
http://services.music.yamaha.com/musicfinder/
1 Download the Music Finder panel settings file from the website
to the USB storage device.
2 Connect the USB storage device which contains the panel
settings file to the [USB TO DEVICE] terminal of the instrument.
3 Press the [MUSIC FINDER] button to call up the MUSIC FINDER
display.
4 Press the [7 ▲▼] (FILES) button to call up the File Selection
display.
74 CVP-509/505/503/501 Owner’s Manual
Music Finder – Calling Up Ideal Setups (Voice, Style, etc.) for Each Song –
5
NOTE
Even after replacing the Music Finder
records, you can restore them to their
original factory settings by selecting
the “MusicFinderPreset” file in PRE-
SET display of the step.
5 Use the TAB [E][F] buttons to call up the USB display containing
the panel settings file downloaded from the website.
6 Press the button which corresponds to the file to display the
message for selecting REPLACE/APPEND of the panel settings.
7 Press the [F] (REPLACE) button to delete all records currently in
the instrument and replace them with the records of the selected
file.
Press the [G] (YES) button at the confirmation prompt.
8 Press the [F] (YES) button in the message display (indicating
completion of the replace operation) to call up the MUSIC
FINDER display.
By checking the number of records in the MUSIC FINDER display, you can
confirm the record has been replaced.
The number
of records
NOTE
For information on registering the
Song/Audio data to the Music Finder,
refer to page 77.
About the Music Finder Records
Each data which can be called up from the MUSIC FINDER display is called a
“record. There are three following different records.
•Panel Settings
Setting data, such as Styles, Voices, etc.
Song (SONG)
Song data which is registered to the Music Finder from the Song Selection display
(page 59)
•Audio (AUDIO) (CVP-509/505/503)
Audio data which is registered to the Music Finder from the USB Audio Selection
display (page 84)
CVP-509/505/503/501 Owner’s Manual 75
Music Finder – Calling Up Ideal Setups (Voice, Style, etc.) for Each Song –
5
1 Press the [MUSIC FINDER] button to call up the MUSIC FINDER
display.
In the ALL display, all the records are shown.
2 Use the [2 ▲▼]/[3 ▲▼] buttons to select the desired Panel
Settings.
You can also use the [DATA ENTRY] dial and the [ENTER] button.
3 Play the chords in the left-hand section of the keyboard.
Selecting the Desired Song from among the Panel Settings
NOTE
Refer to page 78 for information on
selecting SONG and AUDIO records.
Sorting the records
Press [F] (SORT BY) button to sort the records by MUSIC, STYLE, BEAT
and TEMPO. Press the [G] (SORT ORDER) button to change the order of
the records (ascending or descending).
When sorting records by MUSIC, you can use the [1 ▲▼] button to skip up
or down through the songs alphabetically. When sorting records by STYLE,
you can use the [4 ▲▼]/[5 ▲▼] button to skip up or down through the
Styles alphabetically. Simultaneously press the [] and [] buttons to move
the cursor to the first record.
Shows the song title
and information of the
Style assigned to the
panel settings.
NOTE
If you want to avoid changing the
Tempo during Style playback when
selecting another record, turn on the
Tempo Lock function by pressing the
[I] (STYLE TEMPO) button in the
Music Finder display.
76 CVP-509/505/503/501 Owner’s Manual
Music Finder – Calling Up Ideal Setups (Voice, Style, etc.) for Each Song –
5
You can search the records by specifying a song name or keyword, using the Search
function of the Music Finder.
1 From the ALL page of the MUSIC FINDER display, press the [6
] (SEARCH 1) button to call up the Search display.
2 Enter the search criteria.
To cancel searching, press the [8 ] (CANCEL) button.
3 Press the [8 ] (START SEARCH) button to start the search.
The Search 1 display appears, showing the results of the search.
Searching the Panel Settings
NOTE
You can search several different Key-
words simultaneously by inserting a
separator (comma) between each.
NOTE
If you select a beat of 2/4 or 6/8, a
Style suitable for performing a song
in 2/4 and 6/8 beat can be searched,
but the actual Style is created by
using a 4/4 beat.
NOTE
When searching Song/Audio files
(page 74), it is necessary to set the
search criteria as follows.
STYLE: Blank
BEAT: ANY
TEMPO: “---” - “---”
[A] MUSIC Searches by song name. Pressing the [A] button calls
up the pop-up window to enter the song name. To clear
the entered Music, press the [F] (CLEAR) button.
[B] KEYWORD Searches by keyword. Pressing the [B] button calls
up the pop-up window to enter the keyword. To clear
the entered Keyword, press the [G] (CLEAR) button.
[C] STYLE Searches by Style. Pressing the [C] button calls up
the Style Selection display. After selecting the
desired Style, press the [EXIT] button to return back
to the Search display. To clear the entered Style,
press the [H] (CLEAR) button.
[D] BEAT Specifies the time signature for the search. All beat
settings are included in the search if you select ANY.
[E] SEARCH
AREA
Selects a specific location (the tab of the upper part of
the MUSIC FINDER display) for searching.
[1 ▲▼] ALL CLEAR Clears all entered search criteria.
[3 ▲▼] TEMPO FROM Sets the range of the tempo you want to use for the
search.
[4 ▲▼] TEMPO TO
[5 ▲▼]/
[6 ▲▼]
GENRE Selects the desired music genre.
NOTE
If you wish to search another criteria,
press the [6 ] (SEARCH 2) button
in the Music Finder display. The
search result is displayed in the
SEARCH 2 display.
CVP-509/505/503/501 Owner’s Manual 77
Music Finder – Calling Up Ideal Setups (Voice, Style, etc.) for Each Song –
5
By registering the Song/Audio data saved in various places (Song Selection display:
page 59; USB Audio Selection display (CVP-509/505/503): page 84) into Music
Finder, the instrument can call up song data easily from the song title.
1 Display the Song data.
Song data (SONG) in the Song Selection display
Press the [SONG SELECT] button to display the song data (Song file) in the
Song Selection display.
Song data (A
UDIO) in the USB Audio Selection display (CVP-509/505/503)
1-1 Press the [USB] button to call up the Playback display (AUDIO PLAYER
display).
1-2 Press the [8 ▲▼] (FILE SELECT) button to display the song data (Audio
file) in the connected USB storage device.
2 Press the [A] – [J] buttons corresponding to the desired file.
3 Press the [6 ] (ADD TO MF) button to register the selected data
to Music Finder.
The display automatically changes to the Music Finder Record Edit display.
4 Press [8 ] (OK) button to start the registration.
Press the [8 ] (CANCEL) button to cancel the registration.
Registering the Song/Audio data (SONG/AUDIO)
NOTE
If you want to register the Song/Audio
data of the USB storage device, con-
nect the USB storage device contain-
ing the data to the [USB TO DEVICE]
terminal.
NOTE
Before using a USB storage device, be
sure to read “Connecting a USB Stor-
age Device” on page 106.
3
78 CVP-509/505/503/501 Owner’s Manual
Music Finder – Calling Up Ideal Setups (Voice, Style, etc.) for Each Song –
5
5 Check the song data (SONG/AUDIO) is added in the MUSIC
FINDER display.
The song data is shown as SONG or AUDIO in the STYLE column.
You can recall the registered song data in the same way as done in the “Selecting the
Desired Song from among the Panel Settings” (page 75) and “Searching the Panel
Settings” (page 76).
• To play back the recalled Song data, press the SONG [PLAY/PAUSE] button after
selecting the SONG record.
• To play back the recalled audio data, press the [USB] button, then press the [2 ▲▼]
(F/II) button after selecting the AUDIO record.
NOTE
If you want to play back Song/Audio
data in the USB storage device, con-
nect the USB storage device contain-
ing the data to the [USB TO DEVICE]
terminal beforehand.
Recalling the registered song data from Music Finder
NOTE
The available contents of the Music
Finder Plus service are subject to
change.
Added convenience using the Internet (Music Finder+)
This service gives you the capability, by connecting the instrument to the Internet,
of searching for and adding desired panel settings and song data via the Internet to
the instrument. Let’s connect the instrument to the Internet, and press the [J]
(MUSIC FINDER+) button on the MUSIC FINDER display!
For more details about this service, refer to the following website.
http://services.music.yamaha.com/musicfinder/
Advanced Features
Refer to the Reference Manual on the website, Chapter 5.
Creating a Set of Favorite Records:
[MUSIC FINDER] TAB [E][F] ALL
[H] (ADD TO FAVORITE)
Editing Records:
[MUSIC FINDER] [8 ▲▼] (RECORD
EDIT)
Saving the Record as a Single File:
[MUSIC FINDER] [7 ▲▼] (FILES)
Viewing Record Information on the
Internet (MUSIC FINDER Plus):
[MUSIC FINDER] [J] (MUSIC FINDER +)
6
Registration Memory – Saving and Recalling Custom Panel Setups –
CVP-509/505/503/501 Owner’s Manual 79
Registration Memory
– Saving and Recalling Custom Panel Setups –
The Registration Memory function allows you to save (or
“register”) virtually all panel settings to a Registration
Memory button, and then instantly recall your custom
panel settings by simply pressing a single button. The
registered settings for eight Registration Memory buttons
should be saved as a single Bank (file).
1 Set up the panel controls (such as Voice, Style, effects, and so
on) as desired.
Refer to the separate Data List for a list of parameters that can be registered
with the Registration Memory function.
2 Press the [MEMORY] button in the REGISTRATION MEMORY
section.
The display for selecting the items to be registered appears.
3 Determine the items you want to register.
Select the desired item by using the [2▲▼] – [7▲▼] buttons, then enter or
remove the checkmark by using the [8
] (MARK ON)/ [8] (MARK OFF)
buttons.
To cancel the operation, press the [I] (CANCEL) button.
Registering Your Panel Setups
2
3
80 CVP-509/505/503/501 Owner’s Manual
Registration Memory – Saving and Recalling Custom Panel Setups –
6
4 Press one of the REGISTRATION MEMORY [1] – [8] buttons to
which you wish to memorize the panel setup.
The memorized button becomes red, which indicates the number button
contains data and its number is selected.
5 Register various panel setups to other buttons by repeating
steps 1 – 4.
The registered panel setups can be recalled by simply pressing the desired
number button.
You can save all the eight registered panel setups as a single Registration Memory
Bank file.
1 Press the REGIST BANK [+] and [-] buttons simultaneously to
call up the Registration Bank Selection Display.
2 Press the [6] (SAVE) button to save the Bank file.
For instructions on saving, refer to page 68.
CAUTION
If you select the button whose
lamp is lit in red or green here,
the panel setup previously
memorized to the button will be
erased and replaced by the new
settings.
About the lamp status
Red: Data registered and currently selected
Green: Data registered but not currently selected
Off: No data registered
NOTE
The panel setups registered in the
numbered buttons are preserved even
when you turn off the power. If you
want to delete all the eight current
panel setups, turn the power on while
holding the B6 key (right-most B key
on the keyboard).
Saving the Registration Memory as a Bank file
Bank 01
Bank 02
Bank 03
Bank 04
NOTE
In general, Registration Memory data
(Bank files) is compatible among the
models CVP-509/505/503/501. How-
ever, the data may not be perfectly
compatible, depending on the specifi-
cations of each model.
2
1
CVP-509/505/503/501 Owner’s Manual 81
Registration Memory – Saving and Recalling Custom Panel Setups –
6
The saved Registration Memory Bank files can be recalled by using the REGIST
BANK [-]/[+] buttons or the following procedure.
1 Press the REGIST BANK [+] and [-] buttons simultaneously to
call up the REGISTRATION BANK Selection Display.
2 Press one of the [A] – [J] buttons to select a Bank.
You can also use the [DATA ENTRY] dial and the [ENTER] button to select a
Bank.
3 Press one of the green-lit numbered buttons ([1] – [8]) in the
Registration Memory section.
You can call up the information display to take a look which Voices and Style are
memorized to the [1] – [8] buttons of a Registration Memory Bank.
1 Simultaneously press the REGIST BANK [+] and [-] buttons to
call up the Registration Bank Selection display, then use the
[A] – [J] buttons to select the desired Bank.
2 Press the [7] (INFO.) button to call up the information display.
By using the TAB [E][F] buttons, you can switch between the two information
display pages: information for the Registration Memory [1] – [4] buttons and
information for the [5] – [8] buttons.
3 Press the [F] (CLOSE) button to close the information display.
Recalling a Registered Panel Setup
NOTE
When recalling the setups including
Song/Style file selection from a USB
storage device, make sure that the
appropriate USB storage device
including the registered Song/Style is
connected into the [USB TO DEVICE]
terminal.
Confirming the Registration Memory Information
1
2
NOTE
You can instantly call up the informa-
tion display of the currently selected
Registration Memory Bank by press-
ing the [DIRECT ACCESS] button and
one of the REGISTRATION MEMORY
[1] – [8] buttons in sequence.
2
3
NOTE
If some Voice part is set to off (CVP-
509/505), the Voice name for corre-
sponding part is shown in gray.
(On the CVP-503/501, the Voice part
name for corresponding part is shown
in gray.)
82 CVP-509/505/503/501 Owner’s Manual
Registration Memory – Saving and Recalling Custom Panel Setups –
6
Advanced Features
Refer to the Reference Manual on the website, Chapter 6.
Disabling recall of specific
items:
[FUNCTION] [E] REGIST SEQUENCE/FREEZE/
VOICE SET TAB [E][F] FREEZE
Calling up Registration
Memory numbers in order:
[FUNCTION] [E] REGIST SEQUENCE/FREEZE/
VOICE SET TAB [E][F] REGISTRATION SEQUENCE
7
USB Audio (CVP-509/505/503) – Playback and Recording Audio Files –
CVP-509/505/503/501 Owner’s Manual 83
USB Audio (CVP-509/505/503)
– Playback and Recording Audio Files –
The convenient USB Audio function allows you to play
back audio files (WAV or MP3) stored to a USB flash
memory device—directly from the instrument. Moreover,
since you can record your performances and recordings as
audio data (.WAV) to a USB flash memory device, it is
possible to play back the files on computer, share them
with your friends, and record your own CDs to enjoy as
well.
Try playing back audio files from USB flash memory on this instrument.
File formats that can be played back
Connect the USB flash memory device containing the audio files to play back to the
[USB TO DEVICE] terminal.
1 Press the [USB] button to call up the Playback display (AUDIO
PLAYER display).
2 Press the [8 ▲▼] (FILE SELECT) button to display the audio
files saved to the connected USB flash memory.
Playing Back Audio Files
CVP-501CVP-503CVP-505CVP-509
NOTE
The instrument cannot be play back
DRM protected files.
.wav 44.1 kHz sample rate, 16 bit resolution, stereo CVP-509
CVP-505
CVP-503
.mp3 44.1/48.0 kHz sample rate, 64-320 kbps and variable bit
rate, mono/stereo
CVP-509
CVP-505
NOTE
Before using a USB flash memory, be
sure to read “Connecting a USB Stor-
age Device” on page 106.
2
84 CVP-509/505/503/501 Owner’s Manual
USB Audio (CVP-509/505/503) – Playback and Recording Audio Files –
7
3 Press one of the [A] – [J] buttons corresponding to the file you
want to listen to.
4 Press the [EXIT] button to return to the Playback display (AUDIO
PLAYER display).
5 Press the [2 ▲▼](F/II) button to play back.
CAUTION
Never attempt to disconnect the
USB flash memory or turn the
power off during playback.
Doing so may corrupt the USB
flash memory data.
CVP-509/505/503/501 Owner’s Manual 85
USB Audio (CVP-509/505/503) – Playback and Recording Audio Files –
7
You can stop, pause, select, rewind, and forward by using the [1 ▲▼] – [6 ▲▼]
buttons. Moreover, you can set the REPEAT mode by pressing the [7 ] button and
adjust the volume by pressing the [7 ] button.
• Playing back audio files repeatedly
Press the [7 ] (REPEAT) button then set the REPEAT mode of the audio file by
using the [7 ▲▼] buttons. To close the setting display, press the [8 ▲▼] (CLOSE)
button.
OFF Plays through the selected file, then stops.
SINGLE Plays through the selected file repeatedly.
ALL Continues playback through all the files in the folder containing the cur-
rent file repeatedly.
RANDOM Randomly and repeatedly plays back all files in the folder containing
the current file.
• Adjusting volume for audio playback
Press the [7 ] (VOL.) button then adjust the volume for audio files by using the
[7 ▲▼] buttons. To close the setting display, press the [8 ▲▼] (CLOSE) button.
Playback-related Operations
86 CVP-509/505/503/501 Owner’s Manual
USB Audio (CVP-509/505/503) – Playback and Recording Audio Files –
7
Try recording your performance as audio data (WAV file) to a USB flash memory.
For example, you can record an ensemble performance of guitar and keyboard
together or record yourself singing along with song playback by connecting a guitar,
microphone or other device to the instrument. The maximum amount of recording
time is 80 minutes per recording, though this may differ depending on the capacity
of the particular USB flash memory.
The following sounds can be recorded.
Internal tone generator of the instrument.
Keyboard parts (Right 1, Right 2, Left), Song parts, Style parts.
Input from a microphone, guitar or other instrument (via the [MIC./LINE IN]
jack).
Input from another audio device, such as a CD player, MP3 player or the like (via
the [MIC./LINE IN] jack).
The recorded data using this function is saved as:
Stereo WAV data
44.1 kHz sample rate/16 bit resolution
1 Connect the USB flash memory to the [USB TO DEVICE]
terminal.
2 Set the desired Voice, etc. which you want to use for your
performance. (For information setting the Voice, see page 37; for
setting the Style, see page 48; for connecting a microphone, see
page 102.)
3 Press the [USB] button.
4 Press the [E] (RECORDER) button to call up the Recording
display (USB AUDIO RECORDER display).
Recording Your Performance as Audio
CVP-501CVP-503CVP-505CVP-509
NOTE
To record your performance by USB
Audio function, use the compatible
USB flash memory. Before using a
USB flash memory, be sure to read
“Connecting a USB Storage Device”
on page 106.
NOTE
Input from the [AUX IN] jacks cannot
be recorded.
NOTE
Songs protected by copyright, such
as preset songs, and the metronome
sound cannot be recorded.Moreover,
the iAFC effect (CVP-509 only;
page 34) does not affect the record-
ing.
NOTE
Recording methods on the instrument
include MIDI recording as well as
audio recording (page 65).
NOTE
The USB storage device of “USB1” is
selected as the recording destination
when multiple USB storage devices
are connected. The destination is
skipped when “USB1” is a floppy disk
drive.
CVP-509/505/503/501 Owner’s Manual 87
USB Audio (CVP-509/505/503) – Playback and Recording Audio Files –
7
5 Start recording by pressing the [J] (REC) button, then start your
performance.
When recording begins, the elapsed recording time is shown on the right side of
the Recording display.
6 Stop recording by pressing the [J] (STOP) button.
The file name is automatically named, and a message indicating the file name is
displayed.
Check the information of the USB flash memory as a record-
ing destination
On the display of step 4, press the [E] (PROPERTY) button to check the
number of the USB flash memory device, memory size of the device, avail-
able recording space on the device, and available time for recording.
Press the [F] (OK)/[EXIT] button to close the PROPERTY display.
CAUTION
Never attempt to disconnect the
USB flash memory or turn the
power off during playback.
Doing so may corrupt the USB
flash memory data or the
recording data.
NOTE
Even if you make a mistake in your
performance, you cannot overwrite an
existing file. Delete the recorded file
on the File Selection display, then
record your performance again.
NOTE
The recording operation continues,
even if you close the Recording dis-
play by pushing the [EXIT] button.
Press the [E] (RECORDER) button to
call up the Recording display again,
then stop the recording by pressing
the [J] (STOP) button.
8
88 CVP-509/505/503/501 Owner’s Manual
Mixing Console – Editing the Volume and Tonal Balance –
Mixing Console
– Editing the Volume and Tonal Balance –
The Mixing Console gives you intuitive control over
aspects of the keyboard parts and Song/Style channels,
including volume balance and the timbre of the sounds.
It lets you adjust the levels and stereo position (pan) of
each Voice to set the optimum balance and stereo image,
and lets you set how the effects are applied.
1 Press the [MIXING CONSOLE] button to call up the MIXING
CONSOLE display.
2 Use the TAB [EE
EE
][F] buttons to call up the desired page.
For details about each display Page, refer to the Reference Manual on the
website.
• VOL/VOICE
Changes the Voice for each part and adjusts panning and volume for each part
(page 90). Using the Auto Revoice function, you can also convert the sound of
commercially available XG song to the special sound using this instrument’s
special Voices.
• FILTER
Adjusts the Harmonic Content (resonance) and sound brightness.
• TUNE
Pitch-related settings (tuning, transpose, etc.).
• EFFECT
Selects effect type and adjusts its depth for each part (page 92).
• EQ
Adjusts equalization parameters to correct the tone or timbre of the sound.
• CMP (CVP-509)
This is the Master Compressor setting which determines the dynamics of
overall sound. See page 93.
Basic Procedure
2
NOTE
The Master Compressor is not
applied to USB audio playback and
Metronome sound.
CVP-509/505/503/501 Owner’s Manual 89
Mixing Console – Editing the Volume and Tonal Balance –
8
3 Press the [MIXING CONSOLE] button repeatedly to call up the
MIXING CONSOLE display for the relevant parts.
The part name is indicated at the top of the display.
4 Use the [A] – [J] buttons to select a parameter, then use the
[1 ▲▼] – [8 ▲▼] buttons to set the value for each part.
5 Save your MIXING CONSOLE settings.
To save the PANEL PART display settings:
Register them to Registration Memory (page 79).
To save the STYLE PART display settings:
Save them as Style data.
1. Call up the operation display.
[FUNCTION]
[F] DIGITAL REC MENU
[B] STYLE CREATOR
2. Press the [EXIT] button to close the RECORD display.
3. Press the [I] (SAVE) button to call up the Style Selection display for sav-
ing your data, then save it (page 68).
• To save the SONG CH 1-8/9-16 display settings:
First register the edited settings as part of the Song data (SETUP), then save
the Song.
1. Call up the operation display.
[FUNCTION]
[F] DIGITAL REC MENU
[A] SONG CREATOR
2. Use the TAB [EE
EE
][FF
FF
] buttons to select the CHANNEL Page.
3. Use the [A]/[B] buttons to select “SETUP.
4. Press the [D] (EXECUTE) button.
5. Press the [I] button to call up the Song Selection display for saving your
data, then save it (page 68).
NOTE
The Style/Song part components are
the same as those that appear in the
display when you press the panel
[CHANNEL ON/OFF] button once or
twice.
Song, Style, MIC (CVP-509/505/503),
Keyboard parts (Left, Right 1, 2)
Rhythm 1, 2, Bass, Chord 1, 2, Pad, Phrase 1, 2
Song channels 1 – 8
Song channels 9 – 16
NOTE
If you simultaneously hold down one
of the [A] – [J] buttons and use the [1
▲▼] – [8 ▲▼] buttons (or the
DATA ENTRY dial), you can instantly
set the same value to all other parts.
90 CVP-509/505/503/501 Owner’s Manual
Mixing Console – Editing the Volume and Tonal Balance –
8
You can change the Voice and adjust panning and volume for each keyboard part,
Style channel or Song channel.
1 Same operation as in the “Basic Procedure” on page 88. In step
2, select VOL/VOICE tab.
2 Press the [C] (or [H]) button to select the VOICE parameter.
3 Press one of the [1 ▲▼] – [8 ▲▼] buttons to select the desired
part.
The Voice Selection display appears.
4 Select a Voice.
Press one of the Voice category selection buttons on the panel, then select a
Voice by using the [A] – [J] buttons (page 37).
5 Press the [EXIT] button to return to the MIXING CONSOLE
display.
6 Save your settings (step 5 on page 89).
Changing Voices and Adjusting Panning/Volume for Each Part
Changing the Voice for each part
3
NOTE
• Some Voices (such as Organ
Flutes) cannot be selected for Style
channels.
• The RHY2 channel in the STYLE
PART display can only be assigned
Drum kit Voices and SFX kit
Voices.
• When playing GM Song data, chan-
nel 10 can only be used for a Drum
kit Voice.
CVP-509/505/503/501 Owner’s Manual 91
Mixing Console – Editing the Volume and Tonal Balance –
8
1 Same operation as in the “Basic Procedure” on page 88. In step
2, select VOL/VOICE tab.
2 Press the [D] (or [I]) button to select the PANPOT parameter or
press the [E] (or [J]) button to select the VOLUME parameter.
3 Use the [1 ▲▼] – [8 ▲▼] buttons to adjust panning/volume for
the desired part.
4 Save your settings (step 5 on page 89).
Adjusting Panning/Volume for each part
PANPOT
VOLUME
92 CVP-509/505/503/501 Owner’s Manual
Mixing Console – Editing the Volume and Tonal Balance –
8
1 Same operation as in the “Basic Procedure” on page 88. In step
2, select EFFECT tab.
2 Use the [C]/[D]/[E] buttons to select the desired effect.
• REVERB:
Reproduce the warm ambience of playing in a concert hall or jazz club.
• CHORUS:
Produces a rich “fat” sound as if several parts are being played
simultaneously.
• DSP:
By default, the most appropriate effect for the selected Voice has been
selected.
3 Use the [1 ▲▼] – [8 ▲▼] buttons to adjust the depth of each
effect for the desired part.
4 Save your settings (step 5 on page 89).
Applying Effects to Each Part
2
NOTE
You can change the effect type by
pressing the [F] (TYPE) button. Refer
to the Reference Manual.
CVP-509/505/503/501 Owner’s Manual 93
Mixing Console – Editing the Volume and Tonal Balance –
8
Compressor is an effect commonly used to limit and compress the dynamics
(softness/loudness) of an audio signal. For signals that vary widely in dynamics,
such as vocals and guitar parts, it “squeezes” the dynamic range, effectively making
soft sounds louder and loud sounds softer. When used with gain to boost the overall
level, this creates a more powerful, more consistently high-level sound.
Select the CMP tab in step 2 on page 88.
Adjusting the Overall Volume Using the Master Compressor
CVP-501CVP-503CVP-505CVP-509
Editing Master Compressor Settings
1 [G] ON/OFF Turns the Master Compressor effect on or off.
2
[2
▲▼]/
[3
▲▼]
TYPE Selects a Master Compressor type.
3
[4
▲▼]
THRESHOLD
OFFSET
Determines the threshold (minimum level at which
compression starts).
4
[5
▲▼]
RATIO
OFFSET
Determines the ratio of compression (how much
the dynamic range is compressed).
5
[7
▲▼]
GAIN OFFSET Determines the output level.
2 34 5
1
Displays the Gain
Reduction (com-
pressed level) and
output level.
94 CVP-509/505/503/501 Owner’s Manual
Mixing Console – Editing the Volume and Tonal Balance –
8
The Master Compressor settings you have edited on page 93 can be saved as the
User Compressor type.
1 Press the [I] (SAVE) button to enter the USER MASTER
COMPRESSOR display.
2 Select the destination to which the User Master compressor is
to be stored, by using the [3 ▲▼] – [6 ▲▼] buttons.
3 Press the [I] (SAVE) button to open the SAVE display.
4 Enter the name of the edited Compressor type (page 27), then
press the [8 ] (OK) button.
5 Press the [EXIT] button to return to the previous display.
The saved Compressor type is shown in the TYPE selection at the bottom left of
the MASTER COMPRESSOR display and can be selected in the same way as
the preset types.
Saving Master Compressor Settings
Advanced Features
Refer to the Reference Manual on the website, Chapter 8.
Converting XG Song Voice to this instru-
ment’s Voice (Song Auto Revoice):
[MIXING CONSOLE] TAB [E][F] VOL/
VOICE [G] SET UP
Editing FILTER parameters:
[MIXING CONSOLE] TAB [E][F] FILTER
Editing TUNE parameters:
[MIXING CONSOLE] TAB [E][F] TUNE
Changing an Effect type:
[MIXING CONSOLE] TAB [E][F]
EFFECT [F] TYPE
Editing EQ parameters:
[MIXING CONSOLE]
TAB [
E][F
] EQ
3
2
9
Internet Direct Connection – Connecting the Clavinova Directly to the Internet –
CVP-509/505/503/501 Owner’s Manual 95
Internet Direct Connection
– Connecting the Clavinova Directly to the Internet –
You can purchase and download Song data and other types
of data from the special website by directly connecting to
the Internet. This section provides the overview of the
Internet Direct Connection. For specific instructions on
connecting and Internet-related terms, refer to the Internet
Connection Guide, which can be downloaded from the
Yamaha Manual Library website.
Press the [INTERNET] button. If the instrument is connected to the Internet, the
special website appears on the display. If it is not connected, first connect by
referring to the section “Connecting the Instrument to the Internet” below.
To quit the Internet Direct Connection function and return to the operation display of
the instrument, press the [EXIT] button.
You can connect the instrument to a full-time online connection (ADSL, optical fiber,
cable Internet, etc.) via a router or a modem equipped with a router. (To use the
Internet connection, you will first need to subscribe to an Internet service or provider.)
Use a computer to connect to the Internet and get online before connecting the
instrument, since no modem or router settings can be made from the instrument itself.
The setting procedure differs depending on your connecting environment (devices
for connection, etc.). For more information, refer to the Internet Connection Guide.
You can view the Internet Connection Guide on the computer’s browser. (The
computer must be connected to the internet.)
1 Access the Manual Library website on the computer browser.
Click “Manual Library” from the menu of included CD-ROM, or enter the
following URL directly.
http://www.yamaha.co.jp/manual/
Entering the Internet Direct Connection Function
NOTE
Only the special website can be
opened when the instrument is
directly connected to the Internet.
Connecting the Instrument to the Internet
NOTE
Depending on the Internet connec-
tion, the number of connectable
devices may be limited. This may
mean that your instrument cannot be
connected to the Internet. If in doubt,
check your contract or contact your
provider.
Viewing the Internet Connection Guide
96 CVP-509/505/503/501 Owner’s Manual
Internet Direct Connection – Connecting the Clavinova Directly to the Internet –
9
2 Enter your model name (CVP-509, for example) in the Model
Name area, then click “Search.
3 Click “Internet Connection Guide” from Search Results.
• Connection example 1:
Connecting by cable (using a LAN cable)
• Connection example 2:
Wireless connection (using a Wireless game adaptor)
• Connection example 3:
Wireless connection (using a USB wireless LAN adaptor)
Connection Examples
IMPORTANT
Due to EU/Korea regulations,
users within Europe and Korea
should use an STP (shielded
twisted pair) cable to prevent
electromagnetic interference.
NOTE
Some types of modems require an
optional hub network for simulta-
neously connecting to several devices
(such as computer, musical instru-
ment, etc.).
NOTE
When you are using a modem with
router, connect the instrument to the
modem by LAN cable.
Modem*
No router
capability
Router
Cable type
LAN cable
LAN cable
*Here, “modem” refers to an ADSL modem, optical network unit (ONU) or cable modem.
LAN
terminal
Access pointModem*
Wireless Game
Adaptor
LAN
terminal
*Here, “modem” refers to an ADSL modem, optical network unit (ONU) or cable modem.
NOTE
(CVP-509/505) Two [USB TO
DEVICE] terminals are provided: one
on the panel and the other at the lower
left of the keyboard.
Access pointModem*
USB Wireless
LAN Adaptor
USB TO DEVICE
terminal
*Here, “modem” refers to an ADSL modem, optical network unit (ONU) or cable modem.
CVP-509/505/503/501 Owner’s Manual 97
Internet Direct Connection – Connecting the Clavinova Directly to the Internet –
9
After connecting the instrument to the internet, use these operations to take
advantage of Internet services directly from the instrument.
By using the [DATA ENTRY] dial and [ENTER] button, you can follow links and
navigate through the website. You can also use the [6
]/[7 ▲▼]/[8 ] buttons and
the [8
] (ENTER) button instead of the [DATA ENTRY] dial and [ENTER] button.
Use the [1
▲▼] (BACK)/[2 ▲▼] (FORWARD) buttons to navigate through
previously selected web pages. You can also use the TAB [E][F] buttons instead of
the [1
▲▼] (BACK)/[2 ▲▼] (FORWARD) buttons. To return to the top page of the
special website, press the [3
▲▼] (HOME) button.
Press the [5
] (REFRESH) button to reload a web page and press the [6 ]
(STOP) to cancel loading.
Operations in the Special Website
Following Links
Return to the Previous Web Page/Refreshing a Web Page
98 CVP-509/505/503/501 Owner’s Manual
Internet Direct Connection – Connecting the Clavinova Directly to the Internet –
9
NOTE
SSL (Secure Sockets Layer) is an
industry-standard method for protect-
ing web communications by using
data encryption and other tools.
Monitoring the Internet Connection Status
The messages and icons at the bottom right of the Internet display indicate
the current Internet connection status.
The following three messages are displayed according to the loading status
of the web page.
Disconnected.: This appears when the instrument is not connected with the
Internet. When this message is displayed, the web page cannot be seen. Icon
1 is displayed.
Now opening web page...: The web page is being loaded. Icon
2 flashes.
Web page has been displayed.: Loading of the web page is completed, and
the page is displayed completely. Icon
2 stops flashing. When the displayed
web page uses SSL, icon
3 is displayed, and information is encrypted for
communication.
Strength of the reception is displayed in
4 when connecting to the Internet
by wireless LAN. When reception is weak, move the instrument near the
access point to improve reception.
Advanced Features
Refer to the Reference Manual on the website, Chapter 9.
Editing the Browser settings:
[INTERNET] [5 ] SETTING [D]
BROWSER SETTINGS
Registering bookmarks of your favorite
pages:
[INTERNET] [4 ▲▼] BOOKMARK [3
▲▼] ADD
4
1
2
3
Message
10
Connections – Using Your Instrument with Other Devices –
CVP-509/505/503/501 Owner’s Manual 99
Connections
– Using Your Instrument with Other Devices –
Before connecting the instrument to other electronic components, turn off the power of all the
components. Also, before turning any components on or off, make sure to set all volume
levels to minimum (0). Otherwise, electrical shock or damage to the components may occur.
CVP-509/505 CVP-503/501
CVP-509 Only
Front (keyboard side)
Right (higher-key side)
Left (lower-key side)
Front (keyboard side)
Right (higher-key side)
Left (lower-key side)
CAUTION
100 CVP-509/505/503/501 Owner’s Manual
Connections – Using Your Instrument with Other Devices –
10
You can connect a stereo system to amplify the instrument’s sound by using the
AUX OUT [L/L+R]/[R] jacks. When using the CVP-509/505/503, the microphone
or guitar sound connected to the instrument’s [MIC./LINE IN] jack is output at the
same time.
You can connect the output jacks of an external device (such as CD player, tone
generator, etc.) to the instrument’s AUX IN [L/L+R]/[R] jacks, letting you hear the
sound of that device through the built-in speakers of the instrument.
Connecting Audio Devices
NOTE
Use audio cables and adaptor plugs
having no (zero) resistance.
NOTE
Use only the [L/L+R] jack for connec-
tion with a monaural device.
CAUTION
When the instrument’s sound is
output to an external device,
first turn on the power to the
instrument, then to the external
device. Reverse this order when
you turn the power off.
CAUTION
Do not route the output from the
[AUX OUT] jacks to the [AUX IN]
jacks. If you make this connec-
tion, the signal input at the
[AUX IN] jacks is output from
the [AUX OUT] jacks. These
connections could result in a
feedback loop that will make
normal performance impossi-
ble, and may even damage both
pieces of equipment.
CAUTION
When the sound of an external
device is output to the instru-
ment, first turn on the power to
the external device, then to the
instrument. Reverse this order
when you turn the power off.
NOTE
Use only the [L/L+R] jack for connec-
tion with a monaural device.
NOTE
The instrument’s [MASTER VOL-
UME] setting affects the input signal
from the [AUX IN] jacks.
Using External Audio Devices for Playback
Playing External Audio Devices with the Built-in Speakers
Phone plug
(standard)
Audio cable
Phone plug
(standard)
Input jack
Powered speaker
RL/L+R
AUX IN
Phone plug
(standard)
Audio cable
LINE OUT
CD player,
Tone generator
CVP-509/505/503/501 Owner’s Manual 101
Connections – Using Your Instrument with Other Devices –
10
By connecting with a television using the [VIDEO OUT] jack of the instrument, the
lyrics (Lyrics)/text (Text) on the instrument's display can be shown on the television.
For CVP-509, the instrument can be connected with the external monitor also by the
[RGB OUT] terminal. The [RGB OUT] terminal delivers higher resolution than the
[VIDEO OUT] jack.
1 Call up the operation display.
[FUNCTION] [J] UTILITY TAB [E][F] SCREEN OUT
2 Set the monitor type and screen contents.
Connecting an External Monitor
CVP-501CVP-503CVP-505CVP-509
CAUTION
Avoid looking at the televisionor
video monitor for prolonged
period of time since doing so
could damage your eye-
sight.Take frequent breaks and
focus your eyes on distant
objects to avoid eyestrain.
Screen Out Settings
RCA pin p lug
VIDEO IN
MIni D-sub 15-pin
(CVP-509 only)
12
NOTE
(CVP-509) When NTSC is selected,
the lower part of the screen might not
be displayed.
1 [1 ▲▼]/
[2 ▲▼]
MONITOR
TYPE
Selects the desired output monitor type (NTSC
or PAL) to correspond to the standard used by
your video equipment.
(In case of CVP-509) Select “RGB” when con-
necting to an external monitor.
2 [3 ▲▼]/
[4 ▲▼]
SCREEN
CONTENT
Determines the contents of the Video Out signal.
LYRICS/TEXT: Only the lyrics of the Song or
text files are output, regardless of the display
that is called up on the instrument.
LCD: The currently selected display is output.
102 CVP-509/505/503/501 Owner’s Manual
Connections – Using Your Instrument with Other Devices –
10
By connecting a microphone or guitar to the [MIC./LINE IN] jack (standard 1/4"
phone jack), you can enjoy singing along with your own performance or playing
guitar along with Song playback. The instrument outputs your vocals or guitar
sounds through the built-in speakers. The following instructions show how to
connect a microphone. Please note that when connecting a guitar or other devices of
high output level, make sure to set the [MIC. LINE] switch to “LINE.
1 Set the [INPUT VOLUME] knob to the minimum position.
2 Connect the microphone to the [MIC./LINE IN] jack.
3 Set the [MIC. LINE] switch to “MIC.
4 (For microphones having a power source, turn on the power
first.) Adjust the [INPUT VOLUME] knob while singing into the
microphone.
Adjust the control while checking the SIGNAL and OVER lamps. The SIGNAL
lamp lights to indicate that an audio signal is being received. Make sure to
adjust the INPUT VOLUME so that this lamp is light. The OVER lamp lights
when the input level is too high. Make sure to adjust the INPUT VOLUME so
that this lamp does not light.
Connecting a Microphone or Guitar
NOTE
Make sure you have a conventional
dynamic microphone.
NOTE
Always set the INPUT VOLUME to
minimum when nothing is connected
to the [MIC./LINE IN] jack. Since the
[MIC./LINE IN] jack is highly sensi-
tive, it may pick up and produce noise
even when nothing is connected.
CVP-501CVP-503CVP-505CVP-509
NOTE
Set the [INPUT VOLUME] knob to the
minimum position before turning off
the power.
Disconnecting the microphone
1. Set the [INPUT VOLUME] knob to the minimum position.
2. Disconnect the microphone from the [MIC./LINE IN] jack.
CVP-509/505/503/501 Owner’s Manual 103
Connections – Using Your Instrument with Other Devices –
10
You can also apply various effects to your voice.
1 Call up the operation display.
[FUNCTION] [G] MIC SETTING/VOCAL HARMONY
2 Use the [2 ▲▼] – [7 ▲▼] buttons to turn the effect on/off.
You can also automatically apply various harmony vocals to your voice.
1 Call up the operation display.
[FUNCTION] [G] MIC SETTING/VOCAL HARMONY
2 Press the [6 ]/[7 ] buttons to turn the harmony vocals (Vocal
Harmony) on.
Applying Effects to Your Voice
[2 ▲▼]/
[3 ▲▼]
TALK Turning TALK on lets you temporarily cancel
the microphone effects or vocal harmony. This is
especially useful when you talk between songs
during a performance.
[4 ▲▼]/
[5 ▲▼]
MIC EFFECT Turning MIC EFFECT on applies an effect to
your voice. The effect type can be selected in the
Mixing Console display (page 92).
[6 ▲▼]/
[7 ▲▼]
VOCAL
HARMONY
See below.
Adding Harmony Vocals to Your Voice
3
2
104 CVP-509/505/503/501 Owner’s Manual
Connections – Using Your Instrument with Other Devices –
10
3 Press the [H] button to call up the Vocal Harmony selection
display.
4 Select a Vocal Harmony type by using the [A] – [J] buttons.
5 Turn the [ACMP ON/OFF] button on.
6 Play and hold down chords in the left-hand section of the
keyboard or play back a Song which contains chord data, as you
sing along with it.
The harmony is applied to your voice according to the chord.
NOTE
You can adjust the volume balance
between the keyboard performance
and the microphone in the Balance
display (page 58).
Advanced Features
Refer to the Reference Manual on the website, Chapter 10.
Microphone overall settings:
[FUNCTION] [G] MIC SETTING/VOCAL
HARMONY [I] MIC SETTING TAB
[E][F] OVERALL SETTING
Talk settings:
[FUNCTION] [G] MIC SETTING/VOCAL
HARMONY [I] MIC SETTING TAB
[E][F] TALK SETTING
Editing Vocal Harmony:
[FUNCTION] [G] MIC SETTING/VOCAL
HARMONY [H] VOCAL HARMONY TYPE
[8 ] (EDIT)
CVP-509/505/503/501 Owner’s Manual 105
Connections – Using Your Instrument with Other Devices –
10
Optional footswitches (Yamaha FC4 or FC5) and an optional Foot controller
(Yamaha FC7) can be connected to the [AUX PEDAL] jack. A footswitch can be
used for switching functions on and off, while a foot controller controls continuous
parameter such as volume.
• Example 1: Controlling the volume of the performance data played on
the keyboard by the foot controller.
Connect the FC7 foot controller to the [AUX PEDAL] terminal. With the initial
factory settings, no special setup is necessary.
• Example 2: Controlling Song Start/Stop by footswitch
Connect a footswitch (FC4 or FC5) to the [AUX PEDAL] jack.
To assign the function to the connected pedal, select “SONG PLAY/PAUSE” in the
operation display: [FUNCTION] [D] CONTROLLER TAB [E][F]
PEDAL.
Connecting a Footswitch/Foot Controller
CAUTION
Make sure to connect or discon-
nect the pedal only when the
power is off.
Advanced Features
Refer to the Reference Manual on the website, Chapter 10.
Assigning specific functions to each
foot pedal:
[FUNCTION] [D] CONTROLLER TAB
[E][F] PEDAL
FC4
FC7
FC5
106 CVP-509/505/503/501 Owner’s Manual
Connections – Using Your Instrument with Other Devices –
10
By connecting a USB storage device to the instrument’s [USB TO DEVICE] terminal, you can save data you’ve
created to the device.
Connecting a USB Storage Device
Precautions when using the [USB TO
DEVICE] terminal
When connecting a USB device to the terminal, be sure to
handle the USB device with care. Follow the important pre-
cautions below.
For more information about the handling of USB devices, refer to the owner’s
manual of the USB device.
Compatible USB devices
• USB storage devices (flash memory, floppy disk drive,
hard disk drive, etc.)
• USB-LAN adaptor
• USB hub
The instrument does not necessarily support all commer-
cially available USB devices. Yamaha cannot guarantee oper-
ation of USB devices that you purchase. Before purchasing a
USB device for use with this instrument, please visit the fol-
lowing web page:
http://music.yamaha.com/download/
Other USB devices such as a computer keyboard or mouse cannot be used.
Connecting a USB device
When connecting a USB device to the [USB TO
DEVICE] terminal, make sure that the connector on the
device is appropriate and that it is connected in the
proper direction.
When connecting a USB device to the [USB TO DEVICE] terminal on
the top panel, remove it before closing the key cover. If the key
cover is closed with the USB device connected, the USB device may
be damaged.
• If you intend to connect two or three devices at the same
time to a terminal, you should use a USB hub device.
The USB hub must be self-powered (with its own power
source) and the power must be on. Only one USB hub
can be used. If an error message appears while using the
USB hub, disconnect the hub from the instrument, then
turn on the power of the instrument and re-connect the
USB hub.
• Though the instrument supports the USB 1.1 standard,
you can connect and use a USB 2.0 storage device with
the instrument. However, note that the transfer speed is
that of USB 1.1.
Using USB Storage Devices
By connecting the instrument to a USB storage device, you
can save data you’ve created to the connected device, as well
as read data from the connected device.
Although CD-R/RW drives can be used to read data to the instrument, they can-
not be used for saving data.
The number of USB storage device to be used
Up to two USB storage devices can be connected to the
[USB TO DEVICE] terminal. (If necessary, use a USB hub.
The number of USB storage devices that can be used simul-
taneously with musical instruments even when a USB hub is
used is a maximum of two.) This instrument can recognize
up to four drives in one USB storage device.
Formatting USB storage media
When a USB storage device is connected or media is
inserted, a message may appear prompting you to format the
device/media. If so, execute the Format operation (page 107).
The format operation overwrites any previously existing data. Make
sure that the media you are formatting does not contain important
data. Proceed with caution, especially when connecting multiple
USB storage media.
To protect your data (write-protect)
To prevent important data from being inadvertently erased,
apply the write-protect provided with each storage device or
media. If you are saving data to the USB storage device,
make sure to disable write-protect.
Connecting/removing USB storage device
Before removing the media from the device, make sure that
the instrument is not accessing data (such as in the Save,
Copy and Delete operations).
Avoid frequently turning the power on/off to the USB storage
device, or connecting/disconnecting the device too often. Doing so
may result in the operation of the instrument “freezing” or hanging
up. While the instrument is accessing data (such as during Save,
Copy, Delete, Load and Format operations) or is mounting the USB
storage device (shortly after the connection), do NOT unplug the
USB connector, do NOT remove the media from the device, and do
NOT turn the power off to either device. Doing so may corrupt the
data on either or both devices.
NOTE
NOTE
CAUTION
NOTE
CAUTION
CAUTION
CVP-509/505/503/501 Owner’s Manual 107
Connections – Using Your Instrument with Other Devices –
10
When a USB storage device is connected or media is inserted, a message may appear
prompting you to format the device/media. If so, execute the format operation.
1 Insert a USB storage device for formatting into the [USB TO
DEVICE].
2 Call up the operation display.
[FUNCTION] [J] UTILITY TAB [E][F] MEDIA
3 Press the [A]/[B] buttons to select the USB device to be
formatted from the device list.
The indications USB 1, USB 2, etc. will be displayed depending on the number
of the connected devices.
4 Press the [H] (FORMAT) button to format the device/media.
By using the [LAN] or [USB TO DEVICE] terminal, you can connect the instrument
to the Internet. For instructions on connecting, refer to page 96 and Internet
Connection Guide downloadable from the Yamaha website.
Formatting a USB Storage Device
CAUTION
The format operation deletes
any previously existing data.
Make sure that the media you
are formatting does not contain
important data. Proceed with
caution, especially when con-
necting multiple USB storage
medias.
Confirming the remaining memory
You can check the remaining memory of the connected USB storage device
by pressing the [F] (PROPERTY) button in step 4 above.
Connecting to the Internet
2
4
3
CVP-509/505 CVP-503/501
108 CVP-509/505/503/501 Owner’s Manual
Connections – Using Your Instrument with Other Devices –
10
By connecting a computer to the [USB TO HOST] terminal, you can transfer data
between the instrument and the computer via MIDI, and use the computer to control,
edit and organize data on the instrument.
Connecting to a Computer
IMPORTANT
You need to install a USB-MIDI
driver to connect the computer
and the instrument. Refer to the
separate Installation Guide.
NOTE
You can also use the MIDI IN/OUT
terminals to connect to a computer. In
this case, a MIDI interface (such as
the Yamaha UX16) is needed. For
more information, refer to the owner’s
manual of the MIDI interface.
CVP-509/505
CVP-503/501
NOTE
• The instrument will begin transmis-
sion a short time after the USB
connection is made.
• When using a USB cable to connect
the instrument to your computer,
make the connection directly with-
out passing through a USB hub.
• For information on setting up your
sequence software, refer to the
owner’s manual of the relevant soft-
ware.
Precautions when using the [USB TO HOST] terminal
When connecting the computer to the [USB TO HOST] terminal, make sure to
observe the following points. Failing to do so risks freezing the computer and
corrupting or losing the data. If the computer or the instrument freezes, restart
the application software or the computer OS, or turn the power to the instrument
off then on again.
Use an AB type USB cable of less than about 3 meters.
Before connecting the computer to the [USB TO HOST] terminal, exit from any power-saving mode of
the computer (such as suspend, sleep, standby).
Before turning on the power to the instrument, connect the computer to the [USB TO HOST] terminal.
Execute the following before turning the power to the instrument on/off or plugging/unplugging the
USB cable to/from the [USB TO HOST] terminal.
Quit any open application software on the computer.
Make sure that data is not being transmitted from the instrument. (Data is transmitted only by play-
ing notes on the keyboard or playing back a song.)
While the computer is connected to the instrument, you should wait for six seconds or more between
these operations: (1) when turning the power of the instrument off then on again, or (2) when alter-
nately connecting/disconnecting the USB cable.
CAUTION
CVP-509/505/503/501 Owner’s Manual 109
Connections – Using Your Instrument with Other Devices –
10
Use the [MIDI] terminals and standard MIDI cables to connect external MIDI
devices (keyboard, sequencer, etc.).
• MIDI IN
Receives MIDI messages from another MIDI device.
• MIDI OUT
Transmits MIDI messages generated by the instrument to another MIDI device.
• MIDI THRU
Simply relays the MIDI messages received at MIDI IN.
For detailed information about the instrument’s MIDI settings, refer to the Reference
Manual.
Connecting External MIDI Devices
CVP-503/501
CVP-509/505
MIDI IN
MIDI OUT
MIDI IN
MIDI OUT
MIDI reception
MIDI transmission
External MIDI device
NOTE
For a general overview of MIDI and
how you can effectively use it, refer to
“MIDI Basics” (downloadable from
the Yamaha website).
Advanced Features
Refer to the Reference Manual on the website, Chapter 10.
MIDI settings:
[FUNCTION] [I] MIDI [8 ] EDIT
11
110 CVP-509/505/503/501 Owner’s Manual
Utility – Making Global Settings –
Utility
– Making Global Settings –
The Utility section in the Function menu provides a
variety of convenient tools and settings for the instrument.
These include general settings that affect the entire
instrument, as well as detailed settings for specific
functions. Also included are data reset functions and
storage media control, such as media formatting.
1 Call up the operation display.
[FUNCTION] [J] UTILITY
2 Use the TAB [EE
EE
][FF
FF
] buttons to call up desired page.
• CONFIG 1
General settings such as Fade in/out time, Metronome sound, Tap Tempo
sound, etc.
• CONFIG 2
General settings such as speaker output, pop-up display time, etc.
• SCREEN OUT (CVP-509/505)
Monitor type and display content settings which are necessary when
connecting a TV monitor (page 101).
• MEDIA
Settings related to a connected USB storage device, such as formatting
(page 107) and confirmation of memory size.
• OWNER
Settings of Owner name (page 17) and Message language (page 17). Parameter
setting backup/restore operations (page 29) can also be done in this page.
• SYSTEM RESET
Resets the settings of the instrument.
3 If necessary, use the [A]/[B] buttons to select the desired parameter.
4 Change the settings by using the [1 ▲▼] – [8 ▲▼] buttons or
execute the operation by using the [A] – [J] buttons.
For details of the Utility settings, refer to the Reference Manual on the website.
Basic Procedure
CVP-509/505: Keyboard Stand Assembly
CVP-509/505/503/501 Owner’s Manual 111
3
CVP-509/505: Keyboard Stand
Assembly
CAUTION
• Assemble the stand on a flat floor with ample space.
• Be careful not to confuse parts, and be sure to install all parts in the correct direc-
tion. Please assemble in accordance with the sequence given below.
• Assembly should be carried out by at least two persons.
• Be sure to use the correct screw size, as indicated below. Use of incorrect screws
can cause damage.
• Be sure to tighten up all screws upon completing assembly of each unit.
• To disassemble, reverse the assembly sequence given below.
1 Remove all parts from the box. Confirm that all
parts shown in the illustration are provided.
2 With the key cover closed, lean A against the
wall.
1 Spread a large soft cloth, such as a blanket on the floor in front of
the wall.
2 Place A on the cloth with the keyboard side turned to the wall.
3 Raise A from the backside, and lean A against the wall with the
keyboard side on the bottom.
Have a Phillips-head (+) screwdriver of the appropriate size ready.
BC
E
G
FF
AA
D
Main unit
Front leg (left) Front leg (right)Rear leg
Pedal box metal
Pedal box
Bundled pedal cord
inside
Rear legs metal cover
AC power cord
4 x 10 mm screws for the cover x 2
5 x 30 mm long screws x 4
5 x 18 mm short screws x 10
Washers x 4
CAUTION
To prevent the key cover from accidentally opening during
assembly, press down on the key cover, making sure that the
sheet (shown) remains in place.
Assembly Parts
4 x 20 mm thin screws x 3
Protective pads x 2
CAUTION
• Be careful not to pinch your fingers.
• Do not lay the main unit upside-down on the floor.
Place the protection pads under the keyboard.
10cm
10cm
Large soft cloth
CAUTION
• The top part of the music rest is not fixed. Support the music rest
with your hand so that the music rest will not fall.
• Do not place the main unit with the rear side facing down.
Protective pads
CAUTION
Please do not touch the speaker net. Doing so may damage the
speaker inside.
112 CVP-509/505/503/501 Owner’s Manual
3
CVP-509/505: Keyboard Stand Assembly
3 Attach B and C to A.
1 Align parts B and A so that the protrusion fits into the hole.
2 Fix the bottom surface of the unit using two long screws.
3 Fix the side of the speaker box using two short screws.
If the screw holes do not align, loosen the other screws and adjust
the position of B.
4 Fix C in the same way.
4 Fix E to D using two short screws.
5 Attach D to A.
1 Fix D to the bottom surface of A using two short screws.
If the screw holes do not align, loosen the other screws and adjust
the position of D.
6 Raise A to the standing position.
Use the front legs as support to raise A.
7 Install F.
B
B
A
A
B
Attach the parts, pressing B onto A so that
the two fit tightly together.
A
B
Tighten the screws after
attaching the washers to
the short screws.
DD
EE
CAUTION
• Be careful not to pinch your fingers.
• When you raise the unit, do not hold the key cover.
DD
A
2 Fix the side of the
speaker box using two
short screws.
AA
AA
DD
1 Remove the plastic
cover from D.
FF
2 Untie and straighten out the
bundled cord attached to
the bottom of F.
DD
F
F
3 Pass the pedal cord from
under D to the backside of A.
4 Attach F.
Use three thin screws.
CVP-509/505/503/501 Owner’s Manual 113
3
CVP-509/505: Keyboard Stand Assembly
8 Connect the pedal cord.
9 Attach G using two screws for the cover.
10 Set the voltage selector and connect the
power cord.
Voltage Selector
Before connecting the AC power cord, check the setting of the
voltage selector which is provided in some areas. To set the selec-
tor for 110V, 127V, 220V or 240V main voltages, use a “minus”
screwdriver to rotate the selector dial so that the correct voltage
for your region appears next to the pointer on the panel. The volt-
age selector is set at 240V when the unit is initially shipped. After
the proper voltage has been selected, connect the AC power cord
to the AC INLET and an AC wall outlet. A plug adaptor may be
also provided in some areas to match the pin configuration of the
AC wall outlets in your area.
11 Set the adjuster.
Rotate the adjuster until it comes in firm contact with the floor
surface.
WARNING
An improper voltage setting can cause serious damage to the instrument
or result in improper operation.
DD
E
1 Insert the pedal cord plug into the
pedal connector.
Insert the plug with the arrow-printed side
facing front (toward the keyboard side). If
the plug will not go in easily, do not force
it. Double-check the orientation of the
plug, then try again.
2 Align the pedal cord into the
groove on the rear leg, and install
the plastic cover onto the groove.
Be careful not to insert the cover’s
attachment strip between the groove
wall and the leg.
Pass the pedal cord
between D and E.
GG
A
(the bottom of the right side as
seen from the front)
After completing the assembly, please check
the following.
• Are there any parts left over?
Review the assembly procedure and correct any errors.
• Is the instrument clear of doors and other movable fix-
tures?
Move the instrument to an appropriate location.
• Does the instrument make a rattling noise when you
shake it?
Tighten all screws.
• Does the pedal box rattle or give way when you step on
the pedals?
Turn the adjuster so that it is set firmly against the floor.
• Are the pedal and power cords inserted securely into the
sockets?
If the main unit creaks or is otherwise unsteady when you play
on the keyboard, refer to the assembly diagrams and retighten
all screws.
When moving the instrument after assembly, always hold the bottom
of the main unit.
CAUTION
Do not hold the key cover or top portion. Improper handling can result in dam-
age to the instrument or personal injury.
Do not hold here.
Hold here.
114 CVP-509/505/503/501 Owner’s Manual
CVP-503: Keyboard Stand Assembly
3
CVP-503: Keyboard Stand
Assembly
CAUTION
• Assemble the stand on a hard and flat floor with ample space.
• Be careful not to confuse parts, and be sure to install all parts in the correct direc-
tion. Please assemble in accordance with the sequence given below.
• Assembly should be carried out by at least two persons.
• Be sure to use the correct screw size, as indicated below. Use of incorrect screws
can cause damage.
• Be sure to tighten up all screws upon completing assembly of each unit.
• To disassemble, reverse the assembly sequence given below.
1 Open the package, take out marked “C” in the
illustration, take out the styrofoam pads, and
place the unit A on top of the pads.
Position the pads so that they will protect the headphone jack located
underneath the front left corner.
2 Attach C to D and E.
3 Attach B.
Depending on the model of digital piano you purchased, the surface
color of one side of the rear panel may be different from the other
side. In this case, position the rear panel so that the side of the surface
color similar to the side panel (left) and the side panel (right) faces
the player.
1 Place the lower side of B on each foot of D and E, then attach the
upper side to D and E.
2 Attach the top of B to D and E by finger-tightening the thin screws
(4 x 12mm).
3 While pushing the lower part of D and E from outside, secure the
bottom ends of B using two tapping screws (4 x 20mm).
4 Insert the other two tapping screws (4 x 20mm) into the other two
screw holes to secure B.
5 Securely tighten the screws on the top of B that were attached in
Step 3- 2).
4 Mount A.
Be sure to place your hands at least 10 cm from either end of A when
positioning it.
Have a Phillips-head (+) screwdriver of the appropriate size ready.
AA
B
C
DE
Main unit
Back panel
Side panel (left)
Side panel (right)
Assembly Parts
CAUTION
To prevent the key cover from accidentally opening during assembly, press
down on the key cover, making sure that the sheet (shown) remains in place.
Phones jacks Styrofoam pads
Pedal box
Bundled pedal cord inside
6 x 25 mm long screws x 4
6 x 16 mm short screws x 4
4 x 12 mm thin screws x 2
4 x 20 mm tapping screws x 4
Cord holders x 2
AC power cord
CAUTION
• Fingers can become pinched between A and C/D/E, be extra careful so
as not to drop A.
• Do not hold the keyboard in any position other than the position shown
in the illustration.
D
E
C
1 Untie and straighten out the bundled cord
attached to the bottom of the C. Don’t dis-
card the vinyl tie, you’ll need it later in
step 6.
2 Use the four 6 x 25 mm long screws to attach C. First attach
one side panel, then attach the other side panel.
25
3
3
1
4
B
E
D
A
At least
10 cm
CVP-509/505/503/501 Owner’s Manual 115
3
CVP-503: Keyboard Stand Assembly
5 Fix A.
1 Center A to produce equal clearance on the left and right sides.
2 Use 6 x 16 mm short screws to secure A from the front.
6 Connect the pedal cord.
7 Set the voltage selector and connect the power
cord.
Voltage Selector
Before connecting the AC power cord, check the setting of the volt-
age selector which is provided in some areas. To set the selector for
110V, 127V, 220V or 240V main voltages, use a “minus” screwdriver
to rotate the selector dial so that the correct voltage for your region
appears next to the pointer on the panel. The voltage selector is set at
240V when the unit is initially shipped.
After the proper voltage has been selected, connect the AC power
cord to the AC INLET and an AC wall outlet. A plug adaptor may be
also provided in some areas to match the pin configuration of the AC
wall outlets in your area.
8 Set the adjuster.
Rotate the adjuster until it comes in firm contact with the floor sur-
face.
WARNING
An improper voltage setting can cause serious damage to the instrument or
result in improper operation.
A
A
1 Insert the pedal cord
plug to the pedal
connector from the
front.
3 Use a vinyl tie to take up any
slack in the pedal cord.
2 Attach the cord holders to D as
shown, then clip the cord into the
holders.
After completing the assembly, please check
the following.
• Are there any parts left over?
Review the assembly procedure and correct any errors.
• Is the Clavinova clear of doors and other movable fix-
tures?
Move the Clavinova to an appropriate location.
• Does the Clavinova make a rattling noise when you shake
it?
Tighten all screws.
• Does the pedal box rattle or give way when you step on
the pedals?
Turn the adjuster so that it is set firmly against the floor.
• Are the pedal and power cords inserted securely into the
sockets?
If the main unit creaks or is otherwise unsteady when you play
on the keyboard, refer to the assembly diagrams and retighten
all screws.
When moving the instrument after assembly, always hold the bottom
of the main unit.
CAUTION
Do not hold the key cover or top portion. Improper handling can result in dam-
age to the instrument or personal injury.
Do not hold here.
Hold here.
116 CVP-509/505/503/501 Owner’s Manual
CVP-501: Keyboard Stand Assembly
3
CVP-501: Keyboard Stand
Assembly
CAUTION
• Assemble the stand on a hard and flat floor with ample space.
• Be careful not to confuse parts, and be sure to install all parts in the correct direc-
tion. Please assemble in accordance with the sequence given below.
• Assembly should be carried out by at least two persons.
• Be sure to use the correct screw size, as indicated below. Use of incorrect screws
can cause damage.
• Be sure to tighten up all screws upon completing assembly of each unit.
• To disassemble, reverse the assembly sequence given below.
1 Open the package, take out marked “C” in the
illustration, take out the styrofoam pads, and
place the unit A on top of the pads.
Remove all parts from the box. Confirm that all parts shown in the
illustration are provided.
2 Attach (finger-tighten) C to D and E.
1 Untie and straighten out the bundled pedal cord. Don’t discard the
vinyl tie, you’ll need it later in step 7.
2 Align D and E with each end of C.
3 Attach D and E to C by finger-tightening the long screws (6 x 20
mm).
3 Attach B.
Depending on the model of digital piano you purchased, the surface
color of one side of the rear panel may be different from the other
side. In this case, position the rear panel so that the side of the surface
color similar to the side panel (left) and the side panel (right) faces
the player.
1 Place the lower side of B on each foot of D and E, then attach the
upper side to D and E.
2 Attach the top of B to D and E by finger-tightening the thin screws
(4 x 12mm).
3 While pushing the lower part of D and E from outside, secure the
bottom ends of B using two tapping screws (4 x 20mm).
4 Insert the other two tapping screws (4 x 20mm) into the other two
screw holes to secure B.
5 Securely tighten the screws on the top of B that were attached in
Step 3- 2).
4 Securely tighten the screws on C that were
attached in Step 2-3.
Have a Phillips-head (+) screwdriver of the appropriate size ready.
A
B
C
DE
Main unit
Back panel
Side panel (left)
Side panel (right)
Assembly Parts
Styrofoam pads
Pedal box
Bundled pedal cord inside
6 x 20 mm long screws x 4
6 x 16 mm short screws x 4
4 x 12 mm thin screws x 2
4 x 20 mm tapping screws x 4
Cord holders x 2
AC power cord
L
D
E
CC
2
3
1
25
3
3
1
4
B
D
E
CC
Tighten the screws.
CVP-509/505/503/501 Owner’s Manual 117
3
CVP-501: Keyboard Stand Assembly
5 Mount A.
Be sure to place your hands at least 10 cm from either end of A when
positioning it.
6 Secure A.
7 Connect the pedal cord.
8 Set the voltage selector and connect the power
cord.
9 Set the adjuster.
Rotate the adjuster until it comes in firm contact with the floor sur-
face.
CAUTION
• Fingers can become pinched between A and rear or side pan-
els, be extra careful so as not to drop A.
• Do not hold the keyboard in any position other than the position shown
in the illustration.
R
B
D
E
A
At least
10 cm
A
1 Center A to produce equal clear-
ance on the left and right sides.
2 Use 6 x 16 mm short screws to secure
A from the front.
1 Insert the pedal cord plug to the
pedal connector from the rear.
3 Attach the cord holders to the
rear panel as shown, then clip
the cord into the holders.
2 Use a vinyl tie to take up any
slack in the pedal cord.
WARNING
An improper voltage setting can cause serious damage to the Clavinova
or result in improper operation.
After completing the assembly, please check
the following.
• Are there any parts left over?
Review the assembly procedure and correct any errors.
• Is the Clavinova clear of doors and other movable fix-
tures?
Move the Clavinova to an appropriate location.
• Does the Clavinova make a rattling noise when you shake
it?
Tighten all screws.
• Does the pedal box rattle or give way when you step on
the pedals?
Turn the adjuster so that it is set firmly against the floor.
• Are the pedal and power cords inserted securely into the
sockets?
If the main unit creaks or is otherwise unsteady when you play
on the keyboard, refer to the assembly diagrams and retighten
all screws.
When moving the instrument after assembly, always hold the bottom
of the main unit.
CAUTION
Do not hold the key cover or top portion. Improper handling can result in dam-
age to the instrument or personal injury.
Voltage Selector
Before connecting the AC power
cord, check the setting of the volt-
age selector which is provided in
some areas. To set the selector for
110V, 127V, 220V or 240V main
voltages, use a “minus” screw-
driver to rotate the selector dial so
that the correct voltage for your
region appears next to the pointer
on the panel. The voltage selector is
set at 240V when the unit is initially shipped.
After the proper voltage has been selected, connect the AC power
cord to the AC INLET and an AC wall outlet. A plug adaptor may be
also provided in some areas to match the pin configuration of the AC
wall outlets in your area.
Do not hold here.
Hold here.
118 CVP-509/505/503/501 Owner’s Manual
Installing the Floppy Disk Drive (Optional) (CVP-509/505)
3
Installing the Floppy Disk Drive
(Optional) (CVP-509/505)
The floppy disk drive can be installed to the bottom of the instrument by using the included floppy disk drive case
and screws.
For a list of optional floppy disk drives available for this instrument, see “Optional Accessories” (page 127).
1 Remove the three backing papers from the
adhesive tape in the case, and fit the floppy
disk drive into the case.
2 Fold the USB cable inside the case as shown.
3 Attach the drive and case assembly to the left
underside of the instrument, using the
included four screws (4mm x 10mm).
4 Connect the USB cable to the [USB TO
DEVICE] terminal.
Have a Phillips-head (+) screwdriver of the appropriate size ready.
Insert the drive to the case, with the side having the rubber
stoppers facing the case.
Dual-sided adhesive tape
Handling the Floppy Disk Drive (FDD) and Floppy Disks
CVP-509/505/503/501 Owner’s Manual 119
3
Handling the Floppy Disk Drive
(FDD) and Floppy Disks
(The floppy disk drive is optional. For instructions on installing the floppy disk drive, see page 127.)
The floppy disk drive lets you save original data you’ve created on the instrument to floppy disk, and allows you to
load data from floppy disk to the instrument.
Be sure to handle floppy disks and treat the disk drive with care. Follow the important precautions below.
3.5" 2DD and 2HD type floppy disks can be used.
If you find that you are unable to use new, blank disks or old disks that
have been used with other devices, you may need to format them. For
details on how to format a disk, see page 107. Keep in mind that all data on
the disk will be lost after formatting. Make sure to check beforehand
whether or not the disk contains important data.
NOTE
Floppy disks formatted on this device may or may not be useable as is on other devices.
Inserting a Floppy Disk into the Disk Drive:
Hold the disk so that the label of the disk is facing upward and the sliding
shutter is facing forward, towards the disk slot. Carefully insert the disk
into the slot, slowly pushing it all the way in until it clicks into place and
the eject button pops out.
CAUTION
Never insert anything but floppy disks into the disk drive. Other objects may cause
damage to the disk drive or floppy disks.
Removing a Floppy Disk
After checking that the instrument is not accessing* the floppy disk
(checking that the use lamp on the floppy disk drive is off), firmly press the
eject button at the upper right of the disk slot all the way in. When the
floppy disk is ejected, pull it out of the drive. If the floppy disk cannot be
removed because it is stuck, do not try to force it, but instead try pressing
the eject button again, or try re-inserting the disk and attempt to eject it
again.
* Access of the disk indicates an active operation, such as recording, play-
back, or deletion of data.
If a floppy disk is inserted while the power is on, the disk is automatically
accessed, since the instrument checks whether the disk has data.
CAUTION
Do not remove the floppy disk or turn off the instrument itself while the disk is being
accessed. Doing so may result not only in loss of data on the disk but also damage
to the floppy disk drive.
Be sure to remove the floppy disk from the disk drive before turning off the
power. A floppy disk left in the drive for extended periods can easily pick
up dust and dirt that can cause data-read and -write errors.
• Clean the read/write head regularly. This instrument employs a precision
magnetic read/write head which, after an extended period of use, will
pick up a layer of magnetic particles from the disks used that will eventu-
ally cause read and write errors.
• To maintain the disk drive in optimum working order Yamaha recom-
mends that you use a commercially-available dry-type head cleaning disk
to clean the head about once a month. Ask your Yamaha dealer about the
availability of proper head cleaning disks.
Handle floppy disks with care, and follow these precau-
tions:
• Do not place heavy objects on a disk or bend or apply pressure to the disk
in any way. Always keep floppy disks in their protective cases when they
are not in use.
• Do not expose the disk to direct sunlight, extremely high or low tempera-
tures, or excessive humidity, dust or liquids.
• Do not open the sliding shutter and touch the exposed surface of the
floppy disk inside.
• Do not expose the disk to magnetic fields, such as those produced by tele-
visions, speakers, motors, etc., since magnetic fields can partially or
completely erase data on the disk, rendering it unreadable.
• Never use a floppy disk with a deformed shutter or housing.
• Do not attach anything other than the provided labels to a floppy disk.
Also make sure that labels are attached in the proper location.
To Protect Your Data (Write-protect Tab):
To prevent accidental erasure of important data, slide the disk’s write-pro-
tect tab to the “protect” position (tab open). When saving data, make sure
that the disk’s write-protect tab is set to the “overwrite” position (tab
closed).
Data Back up
For maximum data security Yamaha recommends that you keep two copies
of important data on separate floppy disks.
Floppy Disk Compatibility
Formatting a Floppy Disk
Inserting/Removing Floppy Disks
Cleaning the Disk Drive Read/Write Head
About Floppy Disks
Write-protect tab
ON
(locked or write
protected)
Write-protect tab
OFF
(unlocked or write
enabled)
120 CVP-509/505/503/501 Owner’s Manual
Troubleshooting
Troubleshooting
Overall
A click or pop is heard when the power is turned on or off. Electrical current is being applied to the instrument. This is normal.
Noise is heard from the instrument’s speakers. Noise may be heard if a mobile phone is used near the instrument or
if the phone is ringing. Turn off the mobile phone, or use it further
away from the instrument.
In the LCD display, there are some black points (unlit) or white
points (always lit).
(CVP-509/505) These are the result of defective pixels and occasion-
ally occur in TFT-LCDs; they do not indicate a problem in operation.
There is a slight difference in sound quality among different notes
played on the keyboard.
This is normal and is a result of the instrument’s sampling system.
Some Voices have a looping sound.
Some noise or vibrato is noticeable at higher pitches, depending
upon the Voice.
The overall volume is too low, or, no sound is heard. The master volume may be set too low. Set it to an appropriate level
with the [MASTER VOLUME] dial.
All keyboard parts are set to off. Use the PART ON/OFF [RIGHT 1]/
[RIGHT 2]/[LEFT] button to turn it on.
The volume of the individual parts may be set too low. Raise the vol-
ume in the BALANCE display (page 58).
Make sure the desired channel is set to ON (pages 57, 64).
Headphones are connected, disabling the speaker output. Unplug the
headphones.
If the speaker is set to OFF. Make sure the speaker setting is set to
ON (page 110). For details, refer to the Reference Manual on the
website.
The sound is distorted or noisy. The volume may be turned up too high. Make sure all relevant volume
settings are appropriate.
This may be caused by certain effects or filter resonance settings.
Check the effect or filter settings and change them accordingly,
referring to the Reference Manual on the website.
Not all simultaneously played notes sound. You are probably exceeding the maximum polyphony (page 125) of
the instrument. When the maximum polyphony is exceeded, the earli-
est played notes will stop sounding, letting the latest played notes
sound.
The keyboard volume is lower than the Song/Style playback vol-
ume.
The volume of the keyboard parts may be set too low. Raise the vol-
ume in the BALANCE display (page 58).
The Main display does not appear even when turning the power on. This may occur if a USB storage device has been installed to the
instrument. Installation of some USB storage device may result a long
interval between turning the power on and appearance of the Main
display. To avoid this, turn the power on after disconnecting the
device.
Some characters of the file/folder name are garbled. The language settings have been changed. Set the appropriate lan-
guage for the file/folder name (page 17).
An existing file is not shown. The file extension (.MID, etc.) may have been changed or deleted.
Manually rename the file, adding the appropriate extension, on a
computer.
Data files with names of more than 50 characters cannot be handled
by the instrument. Rename the file, reducing the number of charac-
ters to 50 or less.
CVP-509/505/503/501 Owner’s Manual 121
Troubleshooting
Voice
The Voice selected from the Voice Selection display does not
sound.
Check whether or not the selected part is turned on (page 39).
A strange “flanging” or “doubling” sound occurs. The sound is
slightly different each time the keys are played.
The RIGHT 1 and RIGHT 2 parts are set to “ON, and both parts are
set to play the same Voice. Turn off the RIGHT 2 part or change the
Voice of one of the parts.
Some Voices will jump an octave in pitch when played in the upper
or lower registers.
This is normal. Some voices have a pitch limit which, when reached,
causes this type of pitch shift.
Style
The Style does not start even when the [START/STOP] button is
pressed.
The Rhythm channel of the selected Style may not contain any data.
Turn the [ACMP ON/OFF] button on and play left-hand section on the
keyboard to sound the accompaniment part of the Style.
Only the rhythm channel plays. Make sure the Auto Accompaniment function is turned on; press the
[ACMP ON/OFF] button.
You may be playing keys in the right hand range of the keyboard.
Make sure to play keys in the chord range of the keyboard.
Styles in a USB storage device cannot be selected. If the size of the Style data is large (about 120 KB or greater), the
Style cannot be selected because the data is too large to be ready by
the instrument.
Song
Songs cannot be selected. This may be because the language settings have been changed. Set
the appropriate language for the Song file name (page 17).
If the size of the Song data is large (about 300 KB or greater), the
Song cannot be selected because the data is too large to be read by
the instrument.
Song playback does not start. The Song has been stopped at the end of the Song data. Return to
the beginning of the Song by pressing the SONG [STOP] button.
In the case a Song to which write-protect has been applied (“Prot. 2
Edit” is shown at the upper left of the Song name), the original file
may not be in the same folder. It cannot be played back unless the
original file (showing “Prot.2 Orig” at the upper left of the Song name)
is in the same folder.
In case of a Song to which write-protect has been applied (“Prot. 2
Edit” is shown at the upper left of the Song name), the original file
name may have been changed. Rename the file with the original file
name (so that “Prot.2 Orig” is shown at the upper left of the Song
name).
In case of a Song to which write-protect has been applied (“Prot. 2
Edit” is shown at the upper left of the Song name), the file icon may
have been changed. Songs to which write-protect has been applied
cannot be played back when the file icon of the original has been
changed.
Song playback stops before the Song is finished. The Guide function is turned on. (In this case, playback is “waiting” for
the correct key to be played.) Press the [GUIDE] button to turn off the
guide function.
The measure number is different from that of the score in the Song
Position display, shown by pressing the [REW]/[FF] buttons.
This happens when playing back music data for which a specific, fixed
tempo is set.
When playing back a Song, some channels do not play. Playback of these channels may be set to “OFF.Turn playback ON for
those channels that are set to “OFF” (page 64).
The Guide lamps do not light during Song playback, even after
pressing the [GUIDE] button.
Any notes outside of the 88-key range cannot be indicated by the
Guide lamps.
The Guide lamps light an octave or two lower/higher than the actual
pitch.
The Guide lamps sometimes light an octave or two lower/higher than
the actual pitch depending on the selected Voice.
The tempo, beat, measure and music notation is not displayed cor-
rectly.
Some Song data for the instrument has been recorded with special
“free tempo” settings. For such Song data, the tempo, beat, measure
and music notation will not be displayed correctly.
122 CVP-509/505/503/501 Owner’s Manual
Troubleshooting
USB Audio function (CVP-509/505/503)
The message “This drive is busy now. appeared, and then the
recording was aborted.
Make sure to use a compatible USB storage device (page 106).
Make sure that the USB storage device has enough memory
(page 87).
If you are using a USB memory device to which data has already
been recorded, check first that no important data remains on the
device, then format it (page 107) and try recording again.
Audio files cannot be selected. The file format may not be compatible with the instrument. The com-
patible formats are: MP3 and WAV (CVP-509/505), WAV (CVP-503).
The DRM protected files cannot be played back.
Recorded file is played back at a different volume compared to
when it was recorded.
The audio playback volume has been changed. Setting the volume
value to 100 plays back the file as the same volume when it was
recorded (page 85).
Mixing Console
The sound seems strange or different than expected when chang-
ing a rhythm Voice (drum kit, etc.) of the Style or Song from the
Mixer.
When changing the rhythm/percussion Voices (drum kits, etc.) of the
Style and Song from the VOICE parameter, the detailed settings
related to the drum voice are reset, and in some cases you may be
unable to restore the original sound. In the case of Song playback,
you can restore the original sound by returning to the beginning of the
Song and playing back from that point. In the case of Style play, you
can restore the original sound by selecting the same Style again.
Microphone/Vocal Harmony (CVP-509/505/503)
The microphone input signal cannot be recorded. The microphone input signal cannot be recorded by Song recording.
Use the USB Audio function (page 86).
Harmony can be heard in addition to the microphone sound. Vocal Harmony is set to “ON. Turn Vocal Harmony off (page 103).
The Vocal Harmony effect sounds distorted or out-of-tune. Your vocal microphone may be picking up extraneous sounds, such
as the Style sound from the instrument. In particular, bass sounds
can cause mistracking of the Vocal Harmony. To remedy this:
• Sing as closely to the microphone as possible.
• Use a unidirectional microphone.
•Turn down the Master volume, Style volume, or Song volume control
(pages 15, 58).
Pedal/AUX Pedal
The damper, sostenuto and soft functions do not work for the rele-
vant pedals.
The pedal cord plug is not connected. Securely insert the pedal cord
plug into the proper jack (page 113, 115, 117).
Make sure that each pedal is properly assigned to SUSTAIN, SOSTE-
NUTO, and SOFT (page 32).
The on/off setting of the footswitch connected to the AUX PEDAL
jack is reversed.
Turn the instrument’s power off, then turn on again without pressing
the footswitch.
AUX IN jacks
Sound input to the AUX IN jacks is interrupted. The output volume of the external device connected to this instrument
is too low. Increase the output volume of the external device. The vol-
ume level reproduced via this instrument's speakers can be adjusted
by using the [MASTER VOLUME] control.
Panel Button Chart
CVP-509/505/503/501 Owner’s Manual 123
Panel Button Chart
No. ............................................Corresponds to the number in the “Panel Controls” on page 12.
Button/Control.......................Indicates the button/controller that you should use at first for entering the
corresponding function.
Display.....................................Indicates the display title (and tab title) called up by operating the button/controller.
Reference Manual.................” indicates that the detailed information is described in the Reference Manual
(downloadable from website).
No. Button/Control Display Page
Reference
Manual
1 [USB TO DEVICE]
terminal
106 —
2 MASTER VOLUME
control
15 —
3 MIC [SIGNAL]/[OVER]
lamp
102 —
4 [DEMO] DEMO display 18
5 [METRONOME ON/OFF] 33
6 TRANSPOSE [-]/[+] TRANSPOSE (pop-up) 42
7 [TAP TEMPO] 53
TEMPO [-]/[+] TEMPO (pop-up) 53
8 STYLE
CONTROL
[POP & ROCK] –
[PIANIST]
Style Selection display 48
[ACMP ON/OFF] 48
[AUTO FILL IN] 53
INTRO [I] – [III] 52
MAIN VARIATION
[A] – [D]
— 53
[BREAK] 53
ENDING/rit. [I] – [III] 52
[SYNC STOP] 52
[SYNC START] 52
[START/STOP] 52
9 [MUSIC FINDER] MUSIC FINDER display ALL 75
FAVORITE 78
SEARCH 1 76
SEARCH 2 76
) [LCD CONTRAST] knob
(CVP-503/501)
— 17
! [MIXING CONSOLE] MIXING CONSOLE display VOL/VOICE 90, 91
FILTER 88
TUNE 88
EFFECT 92
EQ 88
CMP (CVP-509) 93
@ [CHANNEL ON/OFF] CHANNEL ON/OFF (SONG) (pop-up) SONG 64
STYLE 58
# TAB [E][F]— 21
[A] – [J] 20
[DIRECT ACCESS] (message) 23
[EXIT] 22
[1 ▲▼] – [8 ▲▼] buttons 21
[DATA ENTRY] dial 22
[ENTER] 22
$ [USB] (CVP-509/505/503) USB/AUDIO PLAYER display 83
124 CVP-509/505/503/501 Owner’s Manual
Panel Button Chart
% [FUNCTION] MASTER TUNE/SCALE TUNE MASTER TUNE 47
SCALE TUNE 47
SONG SETTING 72
STYLE SETTING/SPLIT POINT/
CHORD FINGERING
STYLE SETTING 58
SPLIT POINT 58
CHORD FINGERING 51, 58
CONTROLLER PEDAL 105
KEYBOARD/PANEL 31, 47
REGIST SEQUENCE/FREEZE/VOICE
SET
REGISTRATION
SEQUENCE
82 _
FREEZE 82
VOICE SET 47
DIGITAL REC MENU SONG CREATOR 72, 89
STYLE CREATOR 58, 89
MIC SETTING/VOCAL HARMONY (CVP-509/505/503) 103
iAFC SETTING (CVP-509) 34
MIDI MIDI template
selection display
109
UTILITY CONFIG 1 110
CONFIG 2 110
SCREEN OUT 101, 110
MEDIA 110
OWNER 17, 29,
110
SYSTEM RESET 110
^ PART ON/OFF [RIGHT1]/[RIGHT2]/
[LEFT]
— 39
& [INTERNET] Clavinova Special Website (only when connected to the internet) 95
* SONG
CONTROL
[SONG SELECT] Song Selection display 59
[REC] CHANNEL ON/OFF (pop-up) 66
[STOP] 60
[PLAY/PAUSE] 60
[REW]/[FF] SONG POSITION (pop-up) 61
[EXTRA TRACKS] 64
[TRACK 2 (L)] 64
[TRACK 1 (R)] 64
[SCORE] SCORE display 62
[LYRICS/TEXT]
(CVP-509/505/503)
LYRICS display, TEXT display 63
[LYRICS](CVP-501) LYRICS display 63
[GUIDE] 64
[REPEAT] 65
( [PIANO RESET] 30
º REGISTRATION
MEMORY
REGIST BANK [-]/[+] REGISTRATION BANK (pop-up) 80
[MEMORY] REGISTRATION MEMORY CONTENTS display 79
[1] – [8] 80
¡ VOICE
CONTROL
[PIANO] - [PERC. &
DRUM KIT]
Voice Selection display 37
[ORGAN FLUTES] Organ Flutes VOICE SET display FOOTAGE 46
VOLUME/ATTACK 47
EFFECT/EQ 47
ONE TOUCH
SETTING
[1] – [4] 55
[OTS LINK] 55
£ [VOICE EFFECT] VOICE EFFECT display 44
¢ Power Opening display 14
No. Button/Control Display Page
Reference
Manual
CVP-509/505/503/501 Owner’s Manual 125
Specifications
Specifications
CVP-509 CVP-505 CVP-503 CVP-501
Size/Weight Width
[in the case of a model with a polished
finish]
1430mm (56-5/16")
[1430mm (56-5/16")]
1430mm (56-5/16")
[1430mm (56-5/16")]
1432mm (56-3/8")
[1432mm (56-3/8")]
1372mm (54")
[1372mm (54")]
Height
[in the case of a
model with a
polished finish]
Without Music Rest 868mm (34-3/16")
[871mm (34-5/16")]
868mm (34-3/16")
[871mm (34-5/16")]
885mm (34-13/16")
[888mm (34-15/16")]
893mm (35-3/16")
[896mm (35-1/4")]
With Music Rest 1025mm (40-3/8")
[1027mm (40-7/16")]
1025mm (40-3/8")
[1027mm (40-7/16")]
1042mm (41")
[1043mm (41-1/16")]
1047mm (41-1/4")
[1048mm (41-1/4")]
Depth
[in the case of a
model with a
polished finish]
Without Music Rest 611mm (24-1/16")
[611mm (24-1/16")]
611mm (24-1/16")
[611mm (24-1/16")]
613mm (24-1/8")
[614mm (24-3/16")]
595mm (23-7/16")
[596mm (23-7/16")]
With Music Rest 609mm (24")
[609mm (24")]
609mm (24")
[609mm (24")]
613mm (24-1/8")
[614mm (24-3/16")]
595mm (23-7/16")
[596mm (23-7/16")]
Weight
[in the case of a model with a polished
finish]
82kg (180lbs., 12oz.)
[84kg (185lbs., 3oz.)]
76kg (167lbs., 9oz.)
[78kg (171lbs., 15oz.)]
71kg (156lbs., 8oz.)
[73kg (160lbs., 15oz.)]
58kg (127lbs., 14oz.)
[60kg (132lbs., 4oz.)]
Control
Interface
Keyboard Number of Keys 88
Type Natural Wood (NW)
Keyboard with Synthetic
Ivory Keytops
(with real-wood white
keys)
Graded Hammer 3 (GH3) Keyboard with Synthetic
Ivory Keytops
Graded Hammer (GH)
Keyboard
Touch Sensitivity Hard2/Hard1/Normal/Soft1/Soft2
Pedal Number of Pedals 3
Half Pedal Yes
Functions Volume, Sustain, Sostenuto, Soft, Glide, Song Play/Pause, Style Start/Stop, etc.
Super Articulation/
Super Articulation 2
Voices
Super Articulation
Voices
Display Type TFT Color VGA LCD TFT Color QVGA LCD B/W QVGA LCD
Size 640 x 480 dots 320 x 240 dots
Contrast Yes
Score Display
Function
Ye s
Lyrics Display
Function
Ye s
Text Viewer Function Yes
Wallpaper
Customization
Ye s
Language English, Japanese, German, French, Spanish, Italian
Panel Language English
Cabinet Key Cover Folding Sliding
Music Rest Ye s
Music Clips Yes
Voices Tone Generation Tone Generating
Technology
AWM Dynamic Stereo Sampling
Pure CF Sampling Yes
Number of Dynamic
Levels
543
Stereo Sustain
Samples
Ye s
Key-off Samples Yes
String Resonance Yes
Polyphony Number of
Polyphony (Max.)
128 + 128 128
126 CVP-509/505/503/501 Owner’s Manual
Specifications
Voices Preset Number of Voices 811 + 480 XG + 26
Drum/SFX Kits + GM2
(+ GS Voices for GS
Song playback)
689 + 480 XG + 23
Drum/SFX Kits + GM2
(+ GS Voices for GS
Song playback)
398 + 480 XG + 19
Drum/SFX Kits + GM2
(+ GS Voices for GS
Song playback)
296 + 480 XG + 15
Drum/SFX Kits + GM2
(+ GS Voices for GS
Song playback)
Super Articulation 2
Voices
11 –––
Super Articulation
Voices
49 38
Mega Voices 23 18 15
Natural! Voices 39 22 22 3
Sweet! Voices 27 24 23 11
Cool! Voices 64 46 33 16
Live! Voices 70 29 19 10
Organ Flutes! 20 10 10 10
Custom Voice Set Yes
Compatibility XG Yes
XF Yes
GS (For Song
Playback)
Ye s
GM Yes
GM2 Yes
VH Yes
AEM Yes
Effects Types Reverb 42 Preset + 3 User
Chorus 106 Preset + 3 User 71 Preset + 3 User
Mono/Poly Yes
DSP DSP 1: 272 Preset + 3
User, DSP 2-9: 272
Preset + 10 User
DSP 1: 271 Preset + 3 User, DSP 2-4: 128 Preset + 10 User
iAFC Yes
Master Compressor 5 Preset + 5 User
Master EQ 5 Preset + 2 User
Part EQ 27 Parts
Part Dual/Layers (Right
Parts 1, 2)
Ye s
Split (Right + Left
Parts)
Ye s
Accompany Style
Related
Vocal Harmony
60 Preset + 10 User
Accompaniment
Styles
Preset Number of Preset
Styles
442 362 272 191
Pro Styles 362 294 213 151
Session Styles 40 30 23 4
Free Play Styles 42––
Pianist Styles 36 36 36 36
File Format Style File Format GE (Guitar Edition)
Fingering Single Finger, Fingered, Fingered On Bass, Multi Finger, AI Fingered, Full Keyboard, AI Full Keyboard
Style Control INTRO x 3, MAIN VARIATION x 4, FILL x 4, BREAK, ENDING x 3
Custom Style Creator Yes
Other Features Music Finder (Max.) 2,500 Records 1,200 Records
One Touch Setting
(OTS)
4 for each Style
Songs Preset Number of Preset
Songs
120 61
Recording Number of Tracks 16
Data Capacity 300KB
Recording Function Quick Recording, Multi Recording, Step Recording
Compatible Data
Format
Playback SMF (Format 0 & 1), ESEQ, XF
Recording SMF (Format 0)
CVP-509 CVP-505 CVP-503 CVP-501
CVP-509/505/503/501 Owner’s Manual 127
Specifications
* Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or
specifications at any time without prior notice. Since specifications, equipment or options may not be the same in every locale, please check with your Yamaha dealer.
Functions Registration
Memory
Number of Buttons 8
Control Regist. Sequence, Freeze
Lesson/Guide Lesson/Guide
Follow Lights, Any Key, Karao-Key, Vocal CueTIME
Follow Lights, Any Key,
Karao-Key
Guide Lamp Yes
Performance
Assistant
Ye s
Demo Demo Yes
USB Audio Playback .wav..mp3 .wav
Recording .wav
Overall Controls Metronome Bell on/off, Human Voices (5 Languages)
Tempo Range 5 - 500, Tap Tempo
Transpose -12 – 0 – +12
Tuning 414.8 – 440 – 466.8 Hz
Scale Type 9
Miscellaneous PIANO RESET
Button
Ye s
Direct Access Yes
Storage and
Connectivity
Storage Internal Memory about 3.2 MB about 2.4 MB about 1.4 MB
External Drives
(Optional)
USB Storage Devices (USB Flash Memory, etc.), Floppy Disk Drive
Connectivity Headphones x 2
Microphone Input Volume, Mic./Line In
MIDI In/Out/Thru
AUX IN L/L+R, R
AUX OUT L/L+R, R
AUX Pedal Yes
VIDEO OUT Yes
RGB OUT Yes
USB TO DEVICE x 2 x 1
USB TO HOST Yes
LAN Yes
Amplifiers and
Speakers
Amplifiers (35 W + 20 W + 20W) x
2 + 20W x 2
40W x 2 20W x 2
Speakers (16cm + 5cm + 3cm
(dome)) x 2 + 10cm x 2
(16cm + 5cm) x 2 16cm x 2
Accessories • Accessory CD-ROM for Windows
• Owner’s Manual
• Data List
• Accessory CD-ROM for Windows Installation Guide
• “50 greats for the Piano” Music Book
• My Yamaha Product User Registration
*The PRODUCT ID on the sheet will be needed when you fill out the User Registration form.
The following item may be included or optional, depending on your locale:
• Bench
Optional
Accessories
Headphones HPE-160
Floppy Disk Drive UD-FD01
Footswitches FC4/FC5
Foot controller FC7
Service Internet Direct Connection Yes
CVP-509 CVP-505 CVP-503 CVP-501
128 CVP-509/505/503/501 Owner’s Manual
Index
Symbols
[F/ II] (PLAY/PAUSE)..................... 60
[
G ](REW)...................................... 61
Numerics
[1 ▲▼] – [8 ▲▼] buttons................. 21
1-16................................................... 72
A
[A] – [J].............................................. 20
A-B Repeat ....................................... 65
ACMP ON/OFF................................. 49
ADD TO FAVORITE.......................... 78
ADD TO MF ...................................... 77
AEM Technology............................... 41
Articulation Effect.............................. 43
ASSEMBLY....................................... 58
Assembly (CVP-501)....................... 116
Assembly (CVP-503)....................... 114
Assembly (CVP-509/505) ............... 111
AUDIO PLAYER ............................... 83
Audio Record (Music Finder) ............ 74
Auto Accompaniment........................ 49
AUTO FILL IN ................................... 53
AUX IN............................................ 100
AUX OUT........................................ 100
AUX PEDAL.................................... 105
B
Backup.............................................. 29
Balance display................................. 58
BASIC ............................................... 58
BASS ................................................ 57
Bookmark.......................................... 98
BREAK.............................................. 53
Browser............................................. 98
C
CD-ROM ............................................. 9
Center Pedal..................................... 32
CHANNEL (Song Creator).................72
CHANNEL (Style Creator).................58
CHANNEL ON/OFF.....................57, 64
Character entry..................................27
CHD1/2 (Chord 1/ 2)..........................57
Chord.................................................51
CHORD (Song Creator).....................72
CHORD FINGERING ..................51, 58
CHORUS...........................................92
CMP...................................................93
Computer.........................................108
CONFIG 1........................................110
CONFIG 2........................................110
Connection ........................................99
Contrast.............................................17
COPY ................................................70
CUT ...................................................70
D
Damper Pedal....................................32
DATA ENTRY dial .............................22
DELETE.............................................71
DEMO................................................18
DEMO (Voice) ...................................38
Dial (Data Entry)................................22
DIRECT ACCESS .............................23
Drum Voice........................................40
DSP.............................................45, 92
DSP VARIATION...............................45
DYNAMIC DAMPER EFFECT...........34
E
EFFECT.............................................88
EFFECT/EQ ......................................47
ENDING/rit.........................................52
ENTER ..............................................22
Entering Characters...........................27
EQ .....................................................88
EXIT...................................................22
EXTRA TRACKS...............................64
F
Factory Reset.....................................29
Fast Forward......................................61
FAVORITE.........................................78
FF.......................................................61
File .....................................................26
File Selection Display.........................26
Fill-in section......................................53
FILTER...............................................88
Floppy Disk Drive.....................118, 119
Folder.................................................27
FOLDER (File Selection Display).......69
Foot Controller .................................105
Footage..............................................46
Footswitch........................................105
FORMAT..........................................107
Free Play............................................50
G
GAIN OFFSET...................................93
GM .................................................9, 47
GROOVE ...........................................58
GS........................................................9
GUIDE................................................64
Guide lamp...................................13, 64
GUIDE MODE....................................65
Guitar ...............................................102
H
Half pedal...........................................32
HARMONY/ECHO .............................45
Headphone Hanger............................16
Headphones.......................................16
HOME ................................................97
I
iAFC...................................................34
INFO (Voice)................................38, 41
INFO. (Registration Memory).............81
INITIAL TOUCH.................................31
Initialize (Factory Reset) ....................29
Index
CVP-509/505/503/501 Owner’s Manual 129
Index
Input jack.........................................100
INPUT VOLUME..............................102
INTERNET.........................................95
Internet Connection Guide ................10
Internet Direct Connection.................95
INTRO ...............................................52
K
Key cover ..........................................14
Keyboard Part ...................................39
L
LAN terminal......................................96
Language ..........................................17
LEFT..................................................39
LEFT HOLD.......................................45
Left Pedal ..........................................32
Link....................................................97
Lyrics.................................................63
LYRICS (Song Creator).....................72
M
Main Display......................................24
MAIN PICTURE.................................18
Main section ......................................53
MAIN VARIATION.............................53
Master Compressor...........................93
MASTER TUNE.................................47
MASTER VOLUME ...........................15
MEDIA.............................................107
MegaVoice ........................................40
MEMORY ....................................58, 79
Message............................................23
Metronome ........................................33
MIC CALIBRATION...........................35
MIC EFFECT...................................103
MIC SETTING/VOCAL HARMONY.103
MIC. LINE switch.............................102
MIC./LINE IN ...................................102
Microphone......................................102
MIDI Basics .......................................10
MIDI IN ............................................109
MIDI OUT ........................................109
MIDI THRU......................................109
MIXING CONSOLE...........................88
MONITOR TYPE.............................101
MONO/POLY.....................................45
MP3...................................................83
Multi Track Recording........................67
MUSIC FINDER.................................73
Music Finder + ...................................78
Music Notation...................................62
Music Rest .........................................15
N
NAME.................................................70
NEXT (Song Playback)......................60
NEXT CANCEL..................................60
O
ONE TOUCH SETTING.....................55
ORGAN FLUTES...............................46
ORGAN TYPE .............................45, 46
OTS INFO..........................................56
OTS LINK...........................................55
Output jack.......................................100
OVER lamp......................................102
OWNER .................................17, 18, 29
Owner Name......................................18
P
P.A.T..................................................72
PAD....................................................57
Panel Button Chart...........................123
PANPOT............................................91
PARAMETER.....................................58
PART ON/OFF...................................39
PASTE...............................................71
Pause.................................................60
Pedal..........................................32, 105
Percussion Voice...............................40
Performance Assistant.......................72
PHONES............................................16
PHR1/2 (Phrase1/2)...........................57
Phrase Mark.......................................61
Pianist................................................50
Piano Lock.........................................30
PIANO RESET...................................30
Pitch setting .......................................42
PLAY/PAUSE.....................................60
Portamento ........................................45
Power button......................................14
Power indicator..................................14
Powered speaker.............................100
PRESET.............................................26
PRESETS (Organ Flutes)..................46
Pro..................................................... 50
Prot.................................................... 61
Protected Song.................................. 61
Q
Quick Recording................................ 66
R
RATIO OFFSET ................................ 93
REC................................................... 66
REC MODE (Song Creator) .............. 72
Record (Music Finder)....................... 74
RECORD EDIT.................................. 78
Recording (Song) .............................. 66
Reference Manual............................. 10
REFRESH ......................................... 97
REGIST BANK .................................. 80
REGISTRATION MEMORY .............. 80
REGISTRATION SEQUENCE .......... 82
REPEAT (Audio playback) ................ 85
REPEAT (Song) ................................ 65
REPERTOIRE................................... 54
RESTORE......................................... 29
REVERB............................................ 92
REW.................................................. 61
Rewind .............................................. 61
RGB OUT........................................ 101
RHY1/2 (Rhythm 1/2)........................ 57
Rhythm.............................................. 48
RIGHT 1-2......................................... 39
Right Pedal........................................ 32
ROTARY SP SPEED ........................ 46
S
SA Voice............................................ 40
SA2 Voice.......................................... 41
SAVE................................................. 68
Scale ................................................. 42
SCALE TUNE.................................... 47
SCORE.............................................. 62
SCREEN CONTENT....................... 101
SCREEN OUT................................. 101
SEARCH (Music Finder) ................... 76
Section .............................................. 53
Session.............................................. 50
SFF...................................................... 9
SFF GE ............................................. 50
Sheet................................................. 15
130 CVP-509/505/503/501 Owner’s Manual
Index
Sheet music brace ............................ 15
SIGNAL lamp.................................. 102
Song Creator..................................... 72
Song Record (Music Finder)............. 74
SONG SELECT ................................ 59
SONG SETTING............................... 72
Sostenuto Pedal................................ 32
SPATIAL EFFECT ............................ 34
Specifications.................................. 125
Split Point.................................... 39, 58
START/STOP ............................. 49, 52
STEP REC........................................ 58
STOP (Song) .................................... 60
STYLE............................................... 48
Style Creator..................................... 58
Style File Format................................. 9
STYLE SETTING.............................. 58
Super Articulation Voice.............. 40, 43
SYNC START ............................. 49, 52
SYNC STOP ..................................... 52
Synchro Start (Song) ........................ 60
SYS/EX............................................. 72
SYSTEM RESET ...................... 29, 110
T
TAB................................................... 21
TALK............................................... 103
TAP TEMPO ..................................... 53
TEMPO ............................................. 53
Tempo............................................... 33
Text................................................... 63
THRESHOLD OFFSET..................... 93
Touch response ................................ 31
Touch sensitivity ............................... 31
TRACK 1 (R)..................................... 64
TRACK 2 (L)...................................... 64
TRANSPOSE.................................... 42
TRANSPOSE ASSIGN ..................... 47
Troubleshooting .............................. 120
TUNE ................................................ 88
U
UP..................................................... 27
USB (File Selection Display)............. 26
USB Audio ........................................ 83
USB AUDIO RECORDER................. 86
USB button........................................ 83
USB Storage Device....................... 106
USB TO DEVICE ............................ 106
USB TO HOST ................................108
USB Wireless LAN Adaptor...............96
USB-MIDI driver ..............................108
USER.................................................26
Utility................................................110
V
VERSION ..........................................18
VH........................................................9
VIBRATO (Organ Flutes)...................46
VIDEO OUT.....................................101
VOCAL HARMONY.........................103
VOICE ...............................................37
VOICE EFFECT ................................44
VOICE SET .......................................47
Voice Type.........................................40
VOL/VOICE.......................................88
Volume ..............................................58
Volume (Audio playback)...................85
VOLUME/ATTACK ............................47
W
WAV ..................................................83
Wireless Game Adaptor ....................96
X
XF........................................................9
XG .................................................9, 47
CVP-509/505/503/501 Owner’s Manual 131
The followings are the titles, credits and copyright notices for fifty
seven (57) of the songs pre-installed in this instrument (CVP-509/505/
503):
Alfie
Theme from the Paramount Picture ALFIE
Words by Hal David
Music by Burt Bacharach
Copyright © 1966 (Renewed 1994) by Famous Music Corporation
International Copyright Secured All Rights Reserved
All Shook Up
Words and Music by Otis Blackwell and Elvis Presley
Copyright © 1957 by Shalimar Music Corporation
Copyright Renewed and Assigned to Elvis Presley Music
All Rights Administered by Cherry River Music Co. and Chrysalis
Songs
International Copyright Secured All Rights Reserved
Beauty And The Beast
from Walt Disneys BEAUTY AND THE BEAST
Lyrics by Howard Ashman
Music by Alan Menken
© 1991 Walt Disney Music Company and Wonderland Music Com-
pany, Inc.
All Rights Reserved Used by Permission
Bésame Mucho (Kiss Me Much)
Music and Spanish Words by Consuelo Velazquez
English Words by Sunny Skylar
Copyright © 1941, 1943 by Promotora Hispano Americana de Musica,
S.A.
Copyrights Renewed
All Rights Administered by Peer International Corporation
International Copyright Secured All Rights Reserved
Blue Hawaii
from the Paramount Picture WAIKIKI WEDDING
Words and Music by Leo Robin and Ralph Rainger
Copyright © 1936, 1937 (Renewed 1963, 1964) by Famous Music Corpo-
ration
International Copyright Secured All Rights Reserved
Blue Moon
Words by Lorenz Hart
Music by Richard Rodgers
© 1934 (Renewed 1962) METRO-GOLDWYN-MAYER INC.
All Rights Controlled by EMI ROBBINS CATALOG INC. (Publishing)
and WARNER BROS. PUBLICATIONS U.S. INC. (Print)
All Rights Reserved Used by Permission
Brazil
Words and Music by Ray Barroso
English lyrics by S. K. Russell
Copyright © 1941 by Peer International Corporation
Copyright Renewed
International Copyright Secured All Rights Reserved
California Girls
Words and Music by Brian Wilson and Mike Love
Copyright © 1965 IRVING MUSIC, INC.
Copyright Renewed
All Rights Reserved Used by Permission
Can You Feel The Love Tonight
from Walt Disney Pictures’ THE LION KING
Music by Elton John
Lyrics by Tim Rice
© 1994 Wonderland Music Company, Inc.
All Rights Reserved Used by Permission
Can’t Help Falling In Love
from the Paramount Picture BLUE HAWAII
Words and Music by George David Weiss, Hugo Peretti and Luigi Cre-
atore
Copyright © 1961 by Gladys Music, Inc.
Copyright Renewed and Assigned to Gladys Music
All Rights Administered by Cherry Lane Music Publishing Company,
Inc. and Chrysalis Music
International Copyright Secured All Rights Reserved
Chim Chim Cher-ee
from Walt Disneys MARY POPPINS
Words and Music by Richard M. Sherman and Robert B. Sherman
© 1963 Wonderland Music Company, Inc.
Copyright Renewed
All Rights Reserved Used by Permission
Do-Re-Mi
from THE SOUND OF MUSIC
Lyrics by Oscar Hammerstein II
Music by Richard Rodgers
Copyright © 1959 by Richard Rodgers and Oscar Hammerstein II
Copyright Renewed
WILLIAMSON MUSIC owner of publication and allied rights through-
out the world
International Copyright Secured All Rights Reserved
Don’t Be Cruel (To A Heart That’s True)
Words and Music by Otis Blackwell and Elvis Presley
Copyright © 1956 by Unart Music Corporation and Elvis Presley Music,
Inc.
Copyright Renewed and Assigned to Elvis Presley Music
All Rights Administered by Cherry River Music Co. and Chrysalis
Songs
International Copyright Secured All Rights Reserved
Edelweiss
from THE SOUND OF MUSIC
Lyrics by Oscar Hammerstein II
Music by Richard Rodgers
Copyright © 1959 by Richard Rodgers and Oscar Hammerstein II
Copyright Renewed
WILLIAMSON MUSIC owner of publication and allied rights through-
out the world
International Copyright Secured All Rights Reserved
Fly Me To The Moon (In Other Words)
featured in the Motion Picture ONCE AROUND
Words and Music by Bart Howard
TRO - © Copyright 1954 (Renewed) Hampshire House Publishing
Corp., New York, NY
International Copyright Secured
All Rights Reserved Including Public Performance For Profit
Used by Permission
Hey Jude
Words and Music by John Lennon and Paul McCartney
Copyright © 1968 Sony/ATV Songs LLC
Copyright Renewed
All Rights Administered by Sony/ATV Music Publishing, 8 Music
Square West, Nashville, TN 37203
International Copyright Secured All Rights Reserved
Hound Dog
Words and Music by Jerry Leiber and Mike Stoller
Copyright © 1956 by Elvis Presley Music, Inc. and Lion Publishing Co.,
Inc.
Copyright Renewed, Assigned to Gladys Music and Universal - MCA
Music Publishing, A Division of Universal Studios, Inc.
All Rights Administered by Cherry Lane Music Publishing Company,
Inc. and Chrysalis Music
International Copyright Secured All Rights Reserved
I Just Called To Say I Love You
Words and Music by Stevie Wonder
© 1984 JOBETE MUSIC CO., INC. and BLACK BULL MUSIC
c/o EMI APRIL MUSIC INC.
All Rights Reserved International Copyright Secured Used by Per-
mission
I Left My Heart In San Francisco
Words by Douglass Cross
Music by George Cory
© 1954 (Renewed 1982) COLGEMS-EMI MUSIC INC.
All Rights Reserved International Copyright Secured Used by Per-
mission
132 CVP-509/505/503/501 Owner’s Manual
In The Mood
By Joe Garland
Copyright © 1939, 1960 Shapiro, Bernstein & Co., Inc., New York
Copyright Renewed
International Copyright Secured All Rights Reserved
Used by Permission
Isn’t She Lovely
Words and Music by Stevie Wonder
© 1976 JOBETE MUSIC CO., INC. and BLACK BULL MUSIC
c/o EMI APRIL MUSIC INC.
All Rights Reserved International Copyright Secured Used by Per-
mission
Let It Be
Words and Music by John Lennon and Paul McCartney
Copyright © 1970 Sony/ATV Songs LLC
Copyright Renewed
All Rights Administered by Sony/ATV Music Publishing, 8 Music
Square West, Nashville, TN 37203
International Copyright Secured All Rights Reserved
Let’s Twist Again
Words by Kal Mann
Music by Dave Appell and Kal Mann
Copyright © 1961 Kalmann Music, Inc.
Copyright Renewed
All Rights Controlled and Administered by Spirit Two Music, Inc.
(ASCAP)
International Copyright Secured All Rights Reserved
Linus And Lucy
By Vince Guaraldi
Copyright © 1965 LEE MENDELSON FILM PRODUCTIONS, INC.
Copyright Renewed
International Copyright Secured All Rights Reserved
Love Story
Theme from the Paramount Picture LOVE STORY
Music by Francis Lai
Copyright © 1970, 1971 (Renewed 1998, 1999) by Famous Music Corpo-
ration
International Copyright Secured All Rights Reserved
Lullaby Of Birdland
Words by George David Weiss
Music by George Shearing
© 1952, 1954 (Renewed 1980, 1982) EMI LONGITUDE MUSIC
All Rights Reserved International Copyright Secured Used by Per-
mission
Michelle
Words and Music by John Lennon and Paul McCartney
Copyright © 1965 Sony/ATV Songs LLC
Copyright Renewed
All Rights Administered by Sony/ATV Music Publishing, 8 Music
Square West, Nashville, TN 37203
International Copyright Secured All Rights Reserved
Mickey Mouse March
from Walt Disneys THE MICKEY MOUSE CLUB
Words and Music by Jimmie Dodd
© 1955 Walt Disney Music Company
Copyright Renewed
All Rights Reserved Used by Permission
Mission: Impossible Theme
from the Paramount Television Series MISSION: IMPOSSIBLE
By Lalo Schifrin
Copyright © 1966, 1967 (Renewed 1994, 1995) by Bruin Music Company
International Copyright Secured All Rights Reserved
Mona Lisa
from the Paramount Picture CAPTAIN CAREY, U.S.A.
Words and Music by Jay Livingston and Ray Evans
Copyright © 1949 (Renewed 1976) by Famous Music Corporation
International Copyright Secured All Rights Reserved
Moon River
from the Paramount Picture BREAKFAST AT TIFFANY’S
Words by Johnny Mercer
Music by Henry Mancini
Copyright © 1961 (Renewed 1989) by Famous Music Corporation
International Copyright Secured All Rights Reserved
Moonlight Serenade
Words by Mitchell Parish
Music by Glen Miller
Copyright © 1939 (Renewed 1967) by ROBBINS MUSIC CORPORA-
TION
All Rights Controlled and Administered by EMI ROBBINS CATALOG
INC.
International Copyright Secured All Rights Reserved
My Favorite Things
from THE SOUND OF MUSIC
Lyrics by Oscar Hammerstein II
Music by Richard Rodgers
Copyright © 1959 by Richard Rodgers and Oscar Hammerstein II
Copyright Renewed
WILLIAMSON MUSIC owner of publication and allied rights through-
out the world
International Copyright Secured All Rights Reserved
My Way
By Paul Anka, Jacques Revaux, Claude Francois and Giles Thibault
© 1997 by Chrysalis Standards, Inc.
Used by Permission. All Rights Reserved.
The Nearness Of You
from the Paramount Picture ROMANCE IN THE DARK
Words by Ned Washington
Music by Hoagy Carmichael
Copyright © 1937, 1940 (Renewed 1964, 1967) by Famous Music Corpo-
ration
International Copyright Secured All Rights Reserved
Theme From “New York, New York”
Music by John Kander
Words by Fred Ebb
© 1977 UNITED ARTISTS CORPORATION
All Rights Controlled by EMI UNART CATALOG INC. (Publishing) and
WARNER BROS. PUBLICATIONS U.S. INC. (Print)
All Rights Reserved Used by Permission
Ob-La-Di, Ob-La-Da
Words and Music by John Lennon and Paul McCartney
Copyright © 1968 Sony/ATV Songs LLC
Copyright Renewed
All Rights Administered by Sony/ATV Music Publishing, 8 Music
Square West, Nashville, TN 37203
International Copyright Secured All Rights Reserved
Proud Mary
Words and Music by J.C. Fogerty
© 1968 (Renewed) JONDORA MUSIC
All Rights Reserved Used by Permission
Return To Sender
Words and Music by Otis Blackwell and Winfield Scott
Copyright © 1962 by Elvis Presley Music, Inc.
Copyright Renewed and Assigned to Elvis Presley Music
All Rights Administered by Cherry River Music Co. and Chrysalis
Songs
International Copyright Secured All Rights Reserved
The Shoop Shoop Song (It’s In His Kiss)
Words and Music by Rudy Clark
Copyright © 1963, 1964 by Trio Music Company, Inc. and Top Of The
Charts
Copyright Renewed
All Rights for the United States Controlled and Administered by Trio
Music Company, Inc.
All Rights for the World excluding the United States Controlled and
Administered by Trio Music Company, Inc. and Alley Music Corp.
International Copyright Secured All Rights Reserved
Used by Permission
CVP-509/505/503/501 Owner’s Manual 133
(Sittin’ On) The Dock Of The Bay
Words and Music by Steve Cropper and Otis Redding
Copyright © 1968, 1975 IRVING MUSIC, INC.
Copyright Renewed
All Rights Reserved Used by Permission
Smoke Gets In Your Eyes
from ROBERTA
Words by Otto Harbach
Music by Jerome Kern
© 1933 UNIVERSAL - POLYGRAM INTERNATIONAL PUBLISHING, INC.
Copyright Renewed
All Rights Reserved
International Rights Secured. Not for broadcast transmission.
DO NOT DUPLICATE. NOT FOR RENTAL.
WARNING: It is a violation of Federal Copyright Law to synchronize
this Multimedia Disc with video tape or film, or to print the Composi-
tion(s) embodied on this Multimedia Disc in the form of standard
music notation, without the express written permission of the copy-
right owner.
Somewhere, My Love
Lara’s Theme from DOCTOR ZHIVAGO
Lyric by Paul Francis Webster
Music by Maurice Jarre
Copyright © 1965, 1966 (Renewed 1993, 1994) Webster Music Co. and
EMI Robbins Catalog Inc.
International Copyright Secured All Rights Reserved
Spanish Eyes
Words by Charles Singleton and Eddie Snyder
Music by Bert Kaempfert
© 1965, 1966 (Renewed 1993, 1994) EDITION DOMA BERT KAEMPFERT
All Rights for the world, excluding Germany, Austria and Switzerland,
Controlled and Administered by SCREEN GEMS-EMI MUSIC INC.
All Rights Reserved International Copyright Secured Used by Per-
mission
Speak Softly, Love (Love Theme)
from the Paramount Picture THE GODFATHER
Words by Larry Kusik
Music by Nino Rota
Copyright © 1972 (Renewed 2000) by Famous Music Corporation
International Copyright Secured All Rights Reserved
Stella By Starlight
from the Paramount Picture THE UNINVITED
Words by Ned Washington
Music by Victor Young
Copyright © 1946 (Renewed 1973, 1974) by Famous Music Corporation
International Copyright Secured All Rights Reserved
Take The “A” Train
Words and Music by Billy Strayhorn
Copyright © 1941; Renewed 1969 DreamWorks Songs (ASCAP) and
Billy Strayhorn Songs, Inc. (ASCAP) for the U.S.A.
Rights for DreamWorks Songs and Billy Strayhorn Songs, Inc. Admin-
istered by Cherry Lane Music Publishing Company, Inc.
International Copyright Secured All Rights Reserved
Tears In Heaven
Words and Music by Eric Clapton and Will Jennings
Copyright © 1992 by E.C. Music Ltd. and Blue Sky Rider Songs
All Rights for E.C. Music Ltd. Administered by Unichappell Music Inc.
All Rights for Blue Sky Rider Songs Administered by Irving Music, Inc.
International Copyright Secured All Rights Reserved
That Old Black Magic
from the Paramount Picture STAR SPANGLED RHYTHM
Words by Johnny Mercer
Music by Harold Arlen
Copyright © 1942 (Renewed 1969) by Famous Music Corporation
International Copyright Secured All Rights Reserved
That’s Amore (That’s Love)
from the Paramount Picture THE CADDY
Words by Jack Brooks
Music by Harry Warren
Copyright © 1953 (Renewed 1981) by Paramount Music Corporation
and Four Jays Music
International Copyright Secured All Rights Reserved
Up Where We Belong
from the Paramount Picture AN OFFICER AND A GENTLEMAN
Words by Will Jennings
Music by Buffy Sainte-Marie and Jack Nitzsche
Copyright © 1982 by Famous Music Corporation and Ensign Music
Corporation
International Copyright Secured All Rights Reserved
Waltz For Debby
Lyric by Gene Lees
Music by Bill Evans
TRO - © Copyright 1964 (Renewed), 1965 (Renewed), 1966 (Renewed)
Folkways Music Publishers, Inc., New York, NY
International Copyright Secured
All Rights Reserved Including Public Performance For Profit
Used by Permission
White Christmas
from the Motion Picture Irving Berlin’s HOLIDAY INN
Words and Music by Irving Berlin
© Copyright 1940, 1942 by Irving Berlin
Copyright Renewed
International Copyright Secured All Rights Reserved
A Whole New World
from Walt Disneys ALADDIN
Music by Alan Menken
Lyrics by Tim Rice
© 1992 Wonderland Music Company, Inc. and Walt Disney Music
Company
All Rights Reserved Used by Permission
Yesterday
Words and Music by John Lennon and Paul McCartney
Copyright © 1965 Sony/ATV Songs LLC
Copyright Renewed
All Rights Administered by Sony/ATV Music Publishing, 8 Music
Square West, Nashville, TN 37203
International Copyright Secured All Rights Reserved
You Are The Sunshine Of My Life
Words and Music by Stevie Wonder
© 1972 (Renewed 2000) JOBETE MUSIC CO., INC. and BLACK BULL
MUSIC
c/o EMI APRIL MUSIC INC.
All Rights Reserved International Copyright Secured Used by Per-
mission
You Sexy Thing
Words and Music by E. Brown
Copyright © 1975 by Finchley Music Corp.
Administered in the USA and Canada by Music & Media International,
Inc.
Administered for the World excluding the USA and Canada by RAK
Music Publishing Ltd.
International Copyright Secured All Rights Reserved
134 CVP-509/505/503/501 Owner’s Manual
CVP-509/505/503/501 Owner’s Manual 135
136 CVP-509/505/503/501 Owner’s Manual
* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA.
(class B)
FCC INFORMATION (U.S.A.)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions con-
tained in this manual, meets FCC requirements. Modifications
not expressly approved by Yamaha may void your authority,
granted by the FCC, to use the product.
2. IMPORTANT: When connecting this product to accessories
and/or another product use only high quality shielded cables.
Cable/s supplied with this product MUST be used. Follow all
installation instructions. Failure to follow instructions could void
your FCC authorization to use this product in the USA.
3. NOTE: This product has been tested and found to comply with
the requirements listed in FCC Regulations, Part 15 for Class
“B” digital devices. Compliance with these requirements pro-
vides a reasonable level of assurance that your use of this prod-
uct in a residential environment will not result in harmful
interference with other electronic devices. This equipment gen-
erates/uses radio frequencies and, if not installed and used
according to the instructions found in the users manual, may
cause interference harmful to the operation of other electronic
devices. Compliance with FCC regulations does not guarantee
that interference will not occur in all installations. If this product
is found to be the source of interference, which can be deter-
mined by turning the unit “OFF” and “ON”, please try to elimi-
nate the problem by using one of the following measures:
Relocate either this product or the device that is being affected
by the interference.
Utilize power outlets that are on different branch (circuit breaker
or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the
antenna. If the antenna lead-in is 300 ohm ribbon lead, change
the lead-in to co-axial type cable.
If these corrective measures do not produce satisfactory results,
please contact the local retailer authorized to distribute this type
of product. If you can not locate the appropriate retailer, please
contact Yamaha Corporation of America, Electronic Service
Division, 6600 Orangethorpe Ave, Buena Park, CA90620
The above statements apply ONLY to those products distributed
by Yamaha Corporation of America or its subsidiaries.
IMPORTANT NOTICE FOR THE UNITED KINGDOM
Connecting the Plug and Cord
IMPORTANT. The wires in this mains lead are coloured in
accordance with the following code:
BLUE : NEUTRAL
BROWN : LIVE
As the colours of the wires in the mains lead of this apparatus
may not correspond with the coloured makings identifying the
terminals in your plug proceed as follows:
The wire which is coloured BLUE must be connected to the ter-
minal which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the
terminal which is marked with the letter L or coloured RED.
Making sure that neither core is connected to the earth terminal
of the three pin plug.
* This applies only to products distributed by Yamaha Music U.K. Ltd. (2 wires)
COMPLIANCE INFORMATION STATEMENT
(DECLARATION OF CONFORMITY PROCEDURE)
Responsible Party : Yamaha Corporation of America
Address : 6600 Orangethorpe Ave., Buena Park,
Calif. 90620
Telephone : 714-522-9011
Type of Equipment : Digital Piano
Model Name : CVP-509/505/503/501
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received including
interference that may cause undesired operation.
See user manual instructions if interference to radio reception is
suspected.
* This applies only to products distributed by
YAMAHA CORPORATION OF AMERICA.
(FCC DoC)
The serial number of this product may be found on the bottom of
the unit. You should note this serial number in the space pro-
vided below and retain this manual as a permanent record of
your purchase to aid identification in the event of theft.
Model No.
Serial No.
(bottom)
For details of products, please contact your nearest Yamaha
representative or the authorized distributor listed below.
Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou
au distributeur le plus proche de vous figurant dans la liste suivante.
Die Einzelheiten zu Produkten sind bei Ihrer unten aufgeführten
Niederlassung und bei Yamaha Vertragshändlern in den jeweiligen
Bestimmungsländern erhältlich.
Para detalles sobre productos, contacte su tienda Yamaha más cercana
o el distribuidor autorizado que se lista debajo.
CANADA
Yamaha Canada Music Ltd.
135 Milner Avenue, Scarborough, Ontario,
M1S 3R1, Canada
Tel: 416-298-1311
U.S.A.
Yamaha Corporation of America
6600 Orangethorpe Ave., Buena Park, Calif. 90620,
U.S.A.
Tel: 714-522-9011
MEXICO
Yamaha de México S.A. de C.V.
Calz. Javier Rojo Gómez #1149,
Col. Guadalupe del Moral
C.P. 09300, México, D.F., México
Tel: 55-5804-0600
BRAZIL
Yamaha Musical do Brasil Ltda.
Rua Joaquim Floriano, 913 - 4' andar, Itaim Bibi,
CEP 04534-013 Sao Paulo, SP. BRAZIL
Tel: 011-3704-1377
ARGENTINA
Yamaha Music Latin America, S.A.
Sucursal de Argentina
Olga Cossettini 1553, Piso 4 Norte
Madero Este-C1107CEK
Buenos Aires, Argentina
Tel: 011-4119-7000
PANAMA AND OTHER LATIN
AMERICAN COUNTRIES/
CARIBBEAN COUNTRIES
Yamaha Music Latin America, S.A.
Torre Banco General, Piso 7, Urbanización Marbella,
Calle 47 y Aquilino de la Guardia,
Ciudad de Panamá, Panamá
Tel: +507-269-5311
THE UNITED KINGDOM/IRELAND
Yamaha Music U.K. Ltd.
Sherbourne Drive, Tilbrook, Milton Keynes,
MK7 8BL, England
Tel: 01908-366700
GERMANY
Yamaha Music Europe GmbH
Siemensstraße 22-34, 25462 Rellingen, Germany
Tel: 04101-3030
SWITZERLAND/LIECHTENSTEIN
Yamaha Music Europe GmbH
Branch Switzerland in Zürich
Seefeldstrasse 94, 8008 Zürich, Switzerland
Tel: 01-383 3990
AUSTRIA
Yamaha Music Europe GmbH Branch Austria
Schleiergasse 20, A-1100 Wien, Austria
Tel: 01-60203900
CZECH REPUBLIC/SLOVAKIA/
HUNGARY/SLOVENIA
Yamaha Music Europe GmbH Branch Austria
Schleiergasse 20, A-1100 Wien, Austria
Tel: 01-602039025
POLAND/LITHUANIA/LATVIA/ESTONIA
Yamaha Music Europe GmbH
Branch Sp.z o.o. Oddzial w Polsce
ul. 17 Stycznia 56, PL-02-146 Warszawa, Poland
Tel: 022-868-07-57
THE NETHERLANDS/
BELGIUM/LUXEMBOURG
Yamaha Music Europe Branch Benelux
Clarissenhof 5-b, 4133 AB Vianen, The Netherlands
Tel: 0347-358 040
FRANCE
Yamaha Musique France
BP 70-77312 Marne-la-Vallée Cedex 2, France
Tel: 01-64-61-4000
ITALY
Yamaha Musica Italia S.P.A.
Viale Italia 88, 20020 Lainate (Milano), Italy
Tel: 02-935-771
SPAIN/PORTUGAL
Yamaha Música Ibérica, S.A.
Ctra. de la Coruna km. 17, 200, 28230
Las Rozas (Madrid), Spain
Tel: 91-639-8888
GREECE
Philippos Nakas S.A. The Music House
147 Skiathou Street, 112-55 Athens, Greece
Tel: 01-228 2160
SWEDEN
Yamaha Scandinavia AB
J. A. Wettergrens Gata 1, Box 30053
S-400 43 Göteborg, Sweden
Tel: 031 89 34 00
DENMARK
YS Copenhagen Liaison Office
Generatorvej 6A, DK-2730 Herlev, Denmark
Tel: 44 92 49 00
FINLAND
F-Musiikki Oy
Kluuvikatu 6, P.O. Box 260,
SF-00101 Helsinki, Finland
Tel: 09 618511
NORWAY
Norsk filial av Yamaha Scandinavia AB
Grini Næringspark 1, N-1345 Østerås, Norway
Tel: 67 16 77 70
ICELAND
Skifan HF
Skeifan 17 P.O. Box 8120, IS-128 Reykjavik, Iceland
Tel: 525 5000
RUSSIA
Yamaha Music (Russia)
Office 4015, entrance 2, 21/5 Kuznetskii
Most street, Moscow, 107996, Russia
Tel: 495 626 0660
OTHER EUROPEAN COUNTRIES
Yamaha Music Europe GmbH
Siemensstraße 22-34, 25462 Rellingen, Germany
Tel: +49-4101-3030
Yamaha Corporation,
Asia-Pacific Music Marketing Group
Nakazawa-cho 10-1, Naka-ku, Hamamatsu,
Japan 430-8650
Tel: +81-53-460-2312
TURKEY/CYPRUS
Yamaha Music Europe GmbH
Siemensstraße 22-34, 25462 Rellingen, Germany
Tel: 04101-3030
OTHER COUNTRIES
Yamaha Music Gulf FZE
LOB 16-513, P.O.Box 17328, Jubel Ali,
Dubai, United Arab Emirates
Tel: +971-4-881-5868
THE PEOPLE’S REPUBLIC OF CHINA
Yamaha Music & Electronics (China) Co.,Ltd.
2F, Yunhedasha, 1818 Xinzha-lu, Jingan-qu,
Shanghai, China
Tel: 021-6247-2211
HONG KONG
Tom Lee Music Co., Ltd.
11/F., Silvercord Tower 1, 30 Canton Road,
Tsimshatsui, Kowloon, Hong Kong
Tel: 2737-7688
INDIA
Yamaha Music India Pvt. Ltd.
5F Ambience Corporate Tower Ambience Mall Complex
Ambience Island, NH-8, Gurgaon-122001, Haryana, India
Tel: 0124-466-5551
INDONESIA
PT. Yamaha Music Indonesia (Distributor)
PT. Nusantik
Gedung Yamaha Music Center, Jalan Jend. Gatot
Subroto Kav. 4, Jakarta 12930, Indonesia
Tel: 21-520-2577
KOREA
Yamaha Music Korea Ltd.
8F, 9F, Dongsung Bldg. 158-9 Samsung-Dong,
Kangnam-Gu, Seoul, Korea
Tel: 080-004-0022
MALAYSIA
Yamaha Music Malaysia, Sdn., Bhd.
Lot 8, Jalan Perbandaran, 47301 Kelana Jaya,
Petaling Jaya, Selangor, Malaysia
Tel: 3-78030900
PHILIPPINES
Yupangco Music Corporation
339 Gil J. Puyat Avenue, P.O. Box 885 MCPO,
Makati, Metro Manila, Philippines
Tel: 819-7551
SINGAPORE
Yamaha Music Asia Pte., Ltd.
#03-11 A-Z Building
140 Paya Lebor Road, Singapore 409015
Tel: 747-4374
TAIWAN
Yamaha KHS Music Co., Ltd.
3F, #6, Sec.2, Nan Jing E. Rd. Taipei.
Taiwan 104, R.O.C.
Tel: 02-2511-8688
THAILAND
Siam Music Yamaha Co., Ltd.
4, 6, 15 and 16
th
floor, Siam Motors Building,
891/1 Rama 1 Road, Wangmai,
Pathumwan, Bangkok 10330, Thailand
Tel: 02-215-2626
OTHER ASIAN COUNTRIES
Yamaha Corporation,
Asia-Pacific Music Marketing Group
Nakazawa-cho 10-1, Naka-ku, Hamamatsu,
Japan 430-8650
Tel: +81-53-460-2317
AUSTRALIA
Yamaha Music Australia Pty. Ltd.
Level 1, 99 Queensbridge Street, Southbank,
Victoria 3006, Australia
Tel: 3-9693-5111
NEW ZEALAND
Music Works LTD
P.O.BOX 6246 Wellesley, Auckland 4680,
New Zealand
Tel: 9-634-0099
COUNTRIES AND TRUST
TERRITORIES IN PACIFIC OCEAN
Yamaha Corporation,
Asia-Pacific Music Marketing Group
Nakazawa-cho 10-1, Naka-ku, Hamamatsu,
Japan 430-8650
Tel: +81-53-460-2312
NORTH AMERICA
CENTRAL & SOUTH AMERICA
EUROPE
AFRICA
MIDDLE EAST
ASIA
OCEANIA
HEAD OFFICE Yamaha Corporation, Pro Audio & Digital Musical Instrument Division
Nakazawa-cho 10-1, Naka-ku, Hamamatsu, Japan 430-8650
Tel: +81-53-460-3273
EKB50
CVP-509 / 505 / 503 / 501
Owner's Manual
DIC231
Thank you for purchasing this Yamaha Clavinova!
We recommend that you read this manual carefully so that you can fully take advantage of the advanced
and convenient functions of the instrument.
We also recommend that you keep this manual in a safe and handy place for future reference.
Before using the instrument, be sure to read “PRECAUTIONS” on pages 6-7.
EN
Yamaha Home Keyboards Home Page
http://music.yamaha.com/homekeyboard/
Yamaha Manual Library
http://www.yamaha.co.jp/manual/
IMPORTANT —Check your power supply—
Make sure that your local AC mains voltage matches the voltage specified on the name plate on the
bottom panel. In some areas a voltage selector may be provided on the bottom panel of the main
keyboard unit near the power cord. Make sure that the voltage selector is set for the voltage in your area.
The voltage selector is set at 240V when the unit is initially shipped. To change the setting use a "minus"
screwdriver to rotate the selector dial so that the correct voltage appears next to the pointer on the panel.
For information on assembling the keyboard stand, refer to the instructions at the end of this manual.
Owner's Manual
CVP-509/505/503/501
U.R.G., Digital Musical Instruments Division
© 2009-2011 Yamaha Corporation
WR05330 109MWAP*.*-**E0
Printed in China
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yamaha CVP-503 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yamaha CVP-503 in de taal/talen: Engels als bijlage per email.

De handleiding is 6,28 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Yamaha CVP-503

Yamaha CVP-503 Gebruiksaanwijzing - Nederlands - 136 pagina's

Yamaha CVP-503 Installatiehandleiding - Deutsch - 32 pagina's

Yamaha CVP-503 Gebruiksaanwijzing - Deutsch - 20 pagina's

Yamaha CVP-503 Gebruiksaanwijzing - Deutsch - 14 pagina's

Yamaha CVP-503 Gebruiksaanwijzing - Deutsch - 136 pagina's

Yamaha CVP-503 Gebruiksaanwijzing - Deutsch - 104 pagina's

Yamaha CVP-503 Gebruiksaanwijzing - English - 4 pagina's

Yamaha CVP-503 Gebruiksaanwijzing - English - 14 pagina's

Yamaha CVP-503 Gebruiksaanwijzing - English - 104 pagina's

Yamaha CVP-503 Gebruiksaanwijzing - English - 92 pagina's

Yamaha CVP-503 Gebruiksaanwijzing - English - 24 pagina's

Yamaha CVP-503 Gebruiksaanwijzing - English - 20 pagina's

Yamaha CVP-503 Installatiehandleiding - English - 32 pagina's

Yamaha CVP-503 Gebruiksaanwijzing - Français - 14 pagina's

Yamaha CVP-503 Gebruiksaanwijzing - Français - 136 pagina's

Yamaha CVP-503 Installatiehandleiding - Français - 32 pagina's

Yamaha CVP-503 Gebruiksaanwijzing - Français - 20 pagina's

Yamaha CVP-503 Gebruiksaanwijzing - Français - 104 pagina's

Yamaha CVP-503 Gebruiksaanwijzing - Italiano - 136 pagina's

Yamaha CVP-503 Gebruiksaanwijzing - Português - 136 pagina's

Yamaha CVP-503 Gebruiksaanwijzing - Espanõl - 136 pagina's

Yamaha CVP-503 Gebruiksaanwijzing - Espanõl - 20 pagina's

Yamaha CVP-503 Gebruiksaanwijzing - Espanõl - 104 pagina's

Yamaha CVP-503 Installatiehandleiding - Espanõl - 32 pagina's

Yamaha CVP-503 Gebruiksaanwijzing - Espanõl - 14 pagina's

Yamaha CVP-503 Gebruiksaanwijzing - Polski - 136 pagina's

Yamaha CVP-503 Gebruiksaanwijzing - Dansk - 136 pagina's

Yamaha CVP-503 Gebruiksaanwijzing - Svenska - 136 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info