590705
36
Verklein
Vergroot
Pagina terug
1/96
Pagina verder
36
Advanced Functions
Recording Your Performance
6. Stop recording.
Press either the [STOP] or [REC] button to stop recording.
When recording is stopped, dashes appear in the display in succession to
indicate that the recorded data is being saved. After the data is saved, “End
will appear on the display and the Song number will appear. Finally, the
recorded parts lamp will light in green to indicate that the current Song
now contains data. (Record mode is disengaged automatically.)
NOTICE
Do not turn off the power of the instrument or disconnect the USB storage device, when dashes appear
in the display in succession. Doing so may delete all Song data in the instrument, including external
Songs (page 29).
7. Playing back the recorded performance.
Press the [PLAY/PAUSE] button to play back the recorded performance.
To stop playback, press the [STOP] button.
MIDI recording allows you to record the right and left parts separately.
1. Make all the initial settings.
Refer to steps 1 to 3 in “Quickly recording a performance without
specifying a part” (page 34).
If there is a part that has already been recorded, you can record the other
part while playing this part. To stop playing of the part which is recorded,
press the button for this part to turn off the green lamp.
NOTICE
If the Song contains data, the part lamp lights up in green when you select a Song. Note that recording
new data on this part will erase the existing data.
2. Call up the Record mode.
Press the [REC] button to call up the Record mode.
3. Select a recording part.
Press the [RIGHT] or [LEFT] button so that the lamp of the recording part
flashes in red.
Record mode can be disengaged before recording by pressing either the
[REC] or [STOP] button.
4. Start recording.
Recording will begin automatically as soon as you play a note on the
keyboard. When you wish to record an empty section at the start of the
Song, press the [PLAY/PAUSE] button to start recording.
Recording specific parts of a Performance (MIDI recording)
Part button indications
Off: Contains no data
On (green): Contains data
Flashing (red): Part is enabled
for recording
NOTE
If the memory of the drive is
running out, “Enp” will appear in
the display after pressing the
[REC] button. You can start
recording, but the memory may
become full during recording. We
recommend that you first remove
any unnecessary files (pages 37,
43) to ensure sufficient memory
capacity.
36

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yamaha CLP-440PE bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yamaha CLP-440PE in de taal/talen: Engels als bijlage per email.

De handleiding is 17,12 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Yamaha CLP-440PE

Yamaha CLP-440PE Gebruiksaanwijzing - Nederlands - 95 pagina's

Yamaha CLP-440PE Gebruiksaanwijzing - Deutsch - 95 pagina's

Yamaha CLP-440PE Gebruiksaanwijzing - Deutsch - 14 pagina's

Yamaha CLP-440PE Gebruiksaanwijzing - English - 7 pagina's

Yamaha CLP-440PE Gebruiksaanwijzing - English - 4 pagina's

Yamaha CLP-440PE Gebruiksaanwijzing - English - 14 pagina's

Yamaha CLP-440PE Gebruiksaanwijzing - Français - 96 pagina's

Yamaha CLP-440PE Gebruiksaanwijzing - Français - 14 pagina's

Yamaha CLP-440PE Gebruiksaanwijzing - Italiano - 96 pagina's

Yamaha CLP-440PE Gebruiksaanwijzing - Português - 95 pagina's

Yamaha CLP-440PE Gebruiksaanwijzing - Espanõl - 96 pagina's

Yamaha CLP-440PE Gebruiksaanwijzing - Espanõl - 14 pagina's

Yamaha CLP-440PE Gebruiksaanwijzing - Polski - 95 pagina's

Yamaha CLP-440PE Gebruiksaanwijzing - Dansk - 95 pagina's

Yamaha CLP-440PE Gebruiksaanwijzing - Svenska - 95 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info