557201
7
Verklein
Vergroot
Pagina terug
1/344
Pagina verder
© 2013 Yamaha Corporation
Printed in China BD-S677/G
BD-S677
USB
5#%&
Blu-ray Disc Player
Lecteur Blu-ray Disc
BD-S677
Owner’s Manual
Mode d’emploi
Bedienungsanleitung
Bruksanvisning
Manuale di istruzioni
Manual de Instrucciones
Gebruiksaanwijzing
G
English Français Deutsch Svenska Italiano Español
Nederlands
00_BD-S677_G_cv.fm Page 1 Thursday, December 5, 2013 3:26 PM
Caution-i En
For U.K. customers
If the socket outlets in the home are not suitable for the
plug supplied with this appliance, it should be cut off and
an appropriate 3 pin plug fitted. For details, refer to the
instructions described below.
The plug severed from the mains lead must be
destroyed, as a plug with bared flexible cord is
hazardous if engaged in a live socket outlet.
Special Instructions for U.K. Model
Note
IMPORTANT
THE WIRES IN MAINS LEAD ARE COLOURED
IN ACCORDANCE WITH THE FOLLOWING
CODE:
Blue: NEUTRAL
Brown: LIVE
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows:
The wire which is coloured BLUE must be connected
to the terminal which is marked with the letter N or
coloured BLACK. The wire which is coloured
BROWN must be connected to the terminal which is
marked with the letter L or coloured RED.
Make sure that neither core is connected to the earth
terminal of the three pin plug.
OBSERVERA
Apparaten kopplas inte bort från växelströmskällan
(nätet) så länge som den är ansluten till vägguttaget,
även om själva apparaten har stängts av.
ADVARSEL
Netspæendingen til dette apparat er IKKE afbrudt,
sålæenge netledningen siddr i en stikkontakt, som er t
endt - også selvom der or slukket på apparatets
afbryder.
VAROITUS
Laitteen toisiopiiriin kytketty käyttökytkin ei irroita
koko laitetta verkosta.
Caution-ii En
Hereby, Yamaha Music Europe GmbH, declares that this
BD-S677 is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC.
This product is limited to indoor use only.
Par la présente, Yamaha Music Europe GmbH déclare que
lappareil BD-S677 est conforme aux exigences essentielles
et aux autres dispositions pertinentes de la directive 1999/5/
CE.
Ce produit est uniquement destiné à une utilisation en
intérieur.
Hiermit erklärt Yamaha Music Europe GmbH, dass sich das
Gerät BD-S677 in Übereinstimmung mit den grundlegenden
Anforderungen und den übrigen einschlägigen
Bestimmungen der Richtlinie 1999/5/EG befindet.
Dieses Gerät ist ausschließlich auf den Gebrauch in
geschlossenen Räumen ausgelegt.
Härmed intygar Yamaha Music Europe GmbH att denna
BD-S677 står I överensstämmelse med de väsentliga
egenskapskrav och övriga relevanta bestämmelser som
framgår av direktiv 1999/5/EG.
Den här produkten får bara användas inomhus.
Con la presente Yamaha Music Europe GmbH dichiara che
questo BD-S677 è conforme ai requisiti essenziali ed alle
altre disposizioni pertinenti stabilite dalla direttiva 1999/5/
CE.
Il prodotto è destinato all’utilizzo esclusivo in interni.
Por la presente, Yamaha Music Europe GmbH, declara que
este BD-S677 cumple con los requisitos esenciales y otras
exigencias relevantes de la Directiva 1999/5/EC.
Este producto está limitado para su uso exclusivo en
interiores.
Hierbij verklaart Yamaha Music Europe GmbH dat het
toestel l BD-S677 in overeenstemming is met de essentiële
eisen en de andere relevante bepalin-gen van richtlijn 1999/
5/EG.
Dit product kan alleen binnenshuis gebruikt worden.
С настоящето, Yamaha Music Europe GmbH, декларира, че
BD-S677 е в съответствие съссъществените изисквания и
другитеприложими разпоредби на Директива 1999/5/EC.
Yamaha Music Europe GmbH tímto prohlašuje, že BD-S677
splňuje základní požadavky a všechna příslušná ustanoveni
Směrnice 1999/5/ES.
Undertegnede Yamaha Music Europe GmbH erklærer herved,
at følgende udstyr BD-S677 overholder de væsentlige krav og
øvrige relevante krav i direktiv 1999/5/EF.
Käesolevaga kinnitab Yamaha Music Europe GmbH seadme
BD-S677 vastavust direktiivi 1999/5/EÜ põhinõuetele ja
nimetatud direktiivist tulenevatele teistele asjakohastele
sätetele.
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Yamaha Music Europe GmbH
ΔΗΛΩΝΕΙ ΟΤΙ BD-S677 ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ
ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ
ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
Ar
šo Yamaha Music Europe GmbH deklarē, ka BD-S677
atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem
ar to saistītajiem noteikumiem.
Šiuo Yamaha Music Europe GmbH deklaruoja, kad šis BD-
S677 atitinka esminius reikalavimus ir kitas 1999/5/EB
Direktyvos nuostatas.
A Yamaha Music Europe GmbH ezzennel kijelenti, hogy a
BD-S677 típusú beren-dezés teljesíti az alapvető
követelményeket és más 1999/5/EK irányelvben
meghatározott vonatkozó rendelkezéseket.
Niniejszym Yamaha Music Europe GmbH deklaruje że BD-
S677 jest zgodny z zasadniczymi wymaganiami i innymi
właściwymi postanowieniami Dyrektywy 1999/5/EC.
Eu, Yamaha Music Europe GmbH, declaro que o BD-S677
cumpre os requisitos essenciais e outras provisões relevantes
da Directiva 1999/5/EC.
Prin prezenta, Yamaha Music Europe GmbH, declară că
aparatul BD-S677 este în conformitate cu cerinţele esenţiale şi
cu alte prevederi pertinente ale Directivei 1999/5/CE.
Yamaha Music Europe GmbH týmto vyhlasuje, že BD-S677
spĺňa základné požiadavky a všetky príslušné ustanovenia
Smernice 1999/5/ES.
Yamaha Music Europe GmbH izjavlja, da je ta BD-S677 v
skladu z bistvenimi zahtevami in drugimi relevantnimi
dolo?ili direktive 1999/5/ES.
Yamaha Music Europe GmbH vakuuttaa täten että BD-S677
tyyppinen laite on direktiivin 1999/5/EY oleellisten
vaatimusten ja sitä koskevien direktiivin muiden ehtojen
mukainen.
Yamaha Music Europe GmbH
Siemensstr. 22-34 25462 Rellingen, Germany
Tel: +49-4101-303-0
Caution-iii En
1 To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
2 Install this sound system in a well ventilated, cool, dry, clean
place-away from direct sunlight, heat sources, vibration, dust,
moisture, and/or cold. For proper ventilation, allow the
following minimum clearances.
Top : 10 cm (4 in)
Rear: 10 cm (4 in)
Side: 10 cm (4 in)
3 Locate this unit away from other electrical appliances,
motors, or transformers to avoid humming sounds.
4 Do not expose this unit to sudden temperature changes from
cold to hot, and do not locate this unit in an environment with
high humidity (i.e. a room with a humidifier) to prevent
condensation inside this unit, which may cause an electrical
shock, fire, damage to this unit, and/or personal injury.
5 Avoid installing this unit where foreign object may fall onto
this unit and/or this unit may be exposed to liquid dripping or
splashing. On the top of this unit, do not place:
Other components, as they may cause damage and/or
discoloration on the surface of this unit.
Burning objects (i.e. candles), as they may cause fire,
damage to this unit, and/or personal injury.
Containers with liquid in them, as they may fall and
liquid may cause electrical shock to the user and/or
damage to this unit.
6 Do not cover this unit with a newspaper, tablecloth, curtain,
etc. in order not to obstruct heat radiation. If the temperature
inside this unit rises, it may cause fire, damage to this unit,
and/or personal injury.
7 Do not plug in this unit to a wall outlet until all connections
are complete.
8 Do not operate this unit upside-down. It may overheat,
possibly causing damage.
9 Do not use force on switches, knobs and/or cords.
10 When disconnecting the power cable from the wall outlet,
grasp the plug; do not pull the cable.
11 Do not clean this unit with chemical solvents; this might
damage the finish. Use a clean, dry cloth.
12 Only voltage specified on this unit must be used. Using this
unit with a higher voltage than specified is dangerous and
may cause fire, damage to this unit, and/or personal injury.
Yamaha will not be held responsible for any damage resulting
from use of this unit with a voltage other than specified.
13 To prevent damage by lightning, keep the power cable
disconnected from a wall outlet or this unit during a lightning
storm.
14 Do not attempt to modify or fix this unit. Contact qualified
Yamaha service personnel when any service is needed. The
cabinet should never be opened for any reasons.
15 When not planning to use this unit for long periods of time
(i.e. vacation), disconnect the AC power plug from the wall
outlet.
16 Be sure to read the “Troubleshooting” section on common
operating errors before concluding that this unit is faulty.
17 Before moving this unit, press p to set this unit to the
standby mode, and disconnect the AC power plug from the
wall outlet.
18 Condensation will form when the surrounding temperature
changes suddenly. Disconnect the power cable from the
outlet, then leave this unit alone.
19 When using this unit for a long time, this unit may become
warm. Turn the power off, then leave this unit alone for
cooling.
20 Install this unit near the AC outlet and where the AC power
plug can be reached easily.
21 The batteries shall not be exposed to excessive heat such as
sunshine, fire or the like.
LASER SAFETY
This unit employs a laser. Due to possible eye injury, only
a qualified service person should remove the cover or
attempt to service this device.
DANGER
This unit emits visible laser radiation when open. Avoid
direct eye exposure to beam. When this unit is plugged
into the wall outlet, do not place your eyes close to the
opening of the disc tray and other openings to look into
inside.
Caution: Read this before operating your unit.
Do not use this unit within 22 cm (9 inches) of persons
with a heart pacemaker implant or defibrillator implant.
Radio waves may affect electro-medical devices. Do not
use this unit near medical devices or inside medical
facilities.
This unit is not disconnected from the AC power source
as long as it is connected to the wall outlet, even if this
unit itself is turned off by p. This state is called the
standby mode. In this state, this unit is designed to
consume a very small quantity of power.
Where the mains plug or an appliance coupler is used as
the disconnect device, the disconnect device shall
remain readily operable.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE.
1 En
1
2
3
4
5
English
What you can do with this Player ..................... 2
Wide variety of supported discs and file formats........... 2
Enhanced network features............................................. 2
Easy setup and operations............................................... 2
Supplied parts .................................................... 2
About discs and files ......................................... 3
Types of discs/files that can be used with this Player .... 3
Loading a disc................................................................. 4
Disc precautions ............................................................. 5
Notice for watching 3D video images ............................ 5
Cinavia technology ......................................................... 5
Controls and functions...................................... 6
Front panel...................................................................... 6
Rear panel ....................................................................... 7
Remote control ............................................................... 8
Video/audio connections................................. 11
Connecting to a TV via an AV receiver ....................... 12
Connecting to a TV directly ......................................... 12
Connecting to a TV and audio equipment .................... 13
Network connection......................................... 14
Wireless connection...................................................... 14
Wired connection.......................................................... 14
DLNA server setup....................................................... 15
USB connection ............................................... 16
Other connections ........................................... 17
Connecting to the REMOTE CONTROL jacks ........... 17
Connecting the power cable ......................................... 17
Initial settings ................................................... 18
Setting with the Easy Setup.......................................... 18
Wireless connection setting.......................................... 18
HOME menu...................................................... 19
Playing back photo/music/video................................... 19
Using network services ................................... 21
About Dropbox™ ......................................................... 21
About Picasa™ Web Albums....................................... 21
About YouTube™ ........................................................ 21
Enjoying smartphone pictures and videos
on the TV screen (Miracast™)..................... 22
Operating this Player from mobile devices
(AV CONTROLLER) ...................................... 22
Advanced playback operation ........................ 23
On Screen menu............................................................ 23
Status menu................................................................... 24
Program play................................................................. 25
Using Search ................................................................ 25
Enjoying BONUSVIEW™ and BD-Live™................. 25
Using Picture in Picture function
(secondary audio/video playback) ........................... 26
Using the feature of BD-Live™ ................................... 26
SETUP menu..................................................... 27
Example of SETUP menu operation ............................ 29
General Setting ............................................................. 30
Display Setting ............................................................. 32
Audio Setting................................................................ 34
System Information ...................................................... 34
About the audio output formats .................................... 35
About the HDMI video output formats ........................ 36
Software upgrade............................................. 37
Upgrading the software ................................................ 37
Troubleshooting ............................................... 38
Power ............................................................................ 38
Basic operation.............................................................. 38
Disc playback................................................................ 38
Picture ........................................................................... 39
Sound ............................................................................ 39
Network......................................................................... 39
Messages on the screen ................................................. 40
Glossary ............................................................ 41
Specifications ................................................... 43
General.......................................................................... 43
Audio performance ....................................................... 43
Input/output................................................................... 43
Copyright ...................................................................... 43
Index .................................................................. 45
(at the end of this manual)
About this manual
This manual describes how to operate this Player
using a remote control except when it is not
available. Some of these operations are also
available using the front panel buttons.
Notes contain important information about safety
and operating instructions. Hint(s) indicates a tip for
your operation.
This manual is printed prior to production. Design
and specifications are subject to change in part as a
result of improvements, etc. In case of differences
between the manual and the product, the product has
priority.
The icons used in this manual
Icons are used to indicate available buttons/functions for a
particular format. For details on playable discs and
formats, see page 3.
: BD-Video
: DVD-Video, DVD-VR, DVD+VR
: Audio CD, Super Audio CD
: Video files
: Audio files
: Photo files
Contents
1. Introduction
2. Connection
3. Playback
4. Settings
5. Additional information
Information about third party software licenses...i
New software that provides additional features or
product improvements will be released as needed. We
recommend upgrading the software of this Player to
the latest version periodically. For details, refer to
“Software upgrade” (p. 37).
BD
DVD
CD
VIDEO
MUSIC
PHOTO
2 En
INTRODUCTION
Wide variety of supported discs and file formats
Blu-ray Disc™, DVDs, SA-CDs and CDs (p. 23)
Blu-ray 3D™ (p. 11), BONUSVIEW™ and BD-Live™ (p. 25)
Video, music and photo files on DVD-R/RW discs, CD-R/RW discs and USB memory devices (p. 19)
Enhanced network features
Enjoying DLNA server (PC or NAS) contents (p. 19)
Enjoying streaming contents on the network services (p. 21)
Operating this player from mobile devices (AV CONTROLLER) via network (p. 22)
Enjoying smartphone pictures and videos on the TV screen (Miracast™) (p. 22)
Easy setup and operations
Quick and easy initial setup (p. 18)
Automatic wireless setup with the WPS (Wi-Fi Protected Setup) (p. 18)
Software upgrade via network or USB (p. 37)
Sequential operations of the TV, AV receiver and this Player (HDMI Control) (p. 30)
Make sure the following accessories are provided with the product.
What you can do with this Player
Supplied parts
5#%&
5#%&
USB contents
Wireless network
(WPS supported)
Various discs
Smartphone contents
(Miracast)
Network streaming
contents
PC/NAS contents
(DLNA)
Batteries (×2)
(AAA, R03, UM-4)
Remote control Power cable
3 En
English
Introduction
1
Types of discs/files that can be
used with this Player
12 cm (5”) and 8 cm (3”) discs can be played back in
this Player. Do not use an 8 cm (3”) to 12 cm (5”)
adapter.
Use discs that conform to compatible standards as
indicated by the presence of official logos on the
disc label. Playback of discs not complying with
these standards is not guaranteed. In addition, the
image quality or sound quality is not guaranteed
even if the discs can be played back.
* This Player is compatible with a USB memory device
formatted with FAT 16/32 and NTFS.
*1 Sampling frequency within 32-48 kHz (Stereo) and
bitrate within 8-320 kbps
*2 Sampling frequency within 32-48 kHz (Stereo) and
bitrate within 32-192 kbps
*3 Sampling frequency of up to 192 kHz/24 bit (LPCM/
Stereo)
*4 WMV9 (maximum resolution: 1,920 x 1,080)
Playback of a file listed in the chart above is not
guaranteed depending on methods of file creation or
codecs used.
Playback of all files on the disc, USB memory
device and network is not guaranteed.
A copyright protected file cannot be played back.
When using DLNA, a file needs to meet the DLNA
sever requirement.
Region management information for
Blu-ray Disc/DVD videos
Blu-ray Disc/DVD video players and discs have
region codes, which dictate the regions in which a
disc can be played. Verify the region code mark on
the rear panel of this Player.
For a Blu-ray Disc, the disc can be played back on
this Player with the same region code mark, or the
region code “ABC” mark.
For a DVD disc, the disc can be played back on this
Player with the same region code mark, or the region
code “ALL” mark.
About discs and files
Media Type Recording Format
BD-ROM/BD-R/
BD-RE
BD-Video/Data files
DVD-ROM DVD-Video
DVD-R/DVD-R
DL/DVD-RW
DVD-Video/DVD-VR/AVCHD/Data files
DVD+R/DVD+R
DL/DVD+RW
DVD-Video/DVD+VR/AVCHD/Data files
CD-ROM CDDA/HDCD
CD-R/CD-RW CDDA/Data files
SA-CD SA-CD
USB* Data files
DLNA Data files
Playable audio
file formats
Playable video
file formats
Playable photo
file formats
MP3 (.mp3)
*1
WMA (.wma)
*2
AAC (.aac/.m4a)
WAV (.wav)
*3
FLAC (.flac)
*3
ALAC (.m4a)
*3
DivX (.divx)
MKV with DivX
format (.mkv)
MKV with H.264
(.mkv)
MPEG PS (.mpeg/
.mpg)
MPEG TS (.ts)
MPEG-4 (.mp4)
VOB (.vob)
AVI (.avi)
ASF (.asf)
WMV (.wmv)
*4
JPEG (.jpeg/.jpg)
GIF (.gif)
PNG (.png)
MUSIC
PHOTO
Notes
Region management information
Destination BD-Video DVD-Video
U.S.A. and Canada Region code “A” or
“ABC”
Region number “1”
or “ALL”
Europe Region code “B” or
“ABC”
Region number “2”
or “ALL”
Asia, Taiwan and
Korea
Region code “A” or
“ABC”
Region number “3”
or “ALL”
Central and South
America
Region code “A” or
“ABC”
Region number “4”
or “ALL”
Australia Region code “B” or
“ABC”
Region number “4”
or “ALL”
1
ALL
2
ALL
3
ALL
4
ALL
4
ALL
4 En
About discs and files
Blu-ray Disc/DVD video operations and functions
may be different from the explanations in this
manual and some operations may be prohibited due
to disc manufacturer’s settings.
If a menu screen or operating instructions are
displayed during playback of a disc, follow the
operating procedure displayed.
Playback for some of the discs may not be possible
depending on the disc.
Finalize all recording media that is played back in
this Player.
“Finalize” refers to a recorder processing a recorded
disc so that it will play in other players/recorders as
well as this Player. Only finalized discs can be
played back in this Player. (This Player does not
have a function to finalize discs.)
About Super Audio CD (SA-CD)
Audio format based upon the current CD standards
but includes a greater amount of information that
provides higher quality sound. There are three types
of discs: single layer, dual layer and hybrid discs.
The hybrid disc can be played on existing CD
players as well as Super Audio CD players since it
contains both standard audio CD and Super Audio
CD information.
This unit does not show the text data included in the
discs on the front panel display.
Loading a disc
Insert the disc with the label facing up.
In case of the disc recorded on both sides, face down
the side to play back.
Playback may begin automatically, depending on the
disc and setting of this Player.
The menu may be displayed first, depending on the disc.
The disc load time may vary depending on the disc.
Russia Region code “C” or
“ABC”
Region number “5”
or “ALL”
Notes
Region management information
Destination BD-Video DVD-Video
5
ALL
Note
Notes
1
2
3
Super Audio CD disc type
Single layer disc
HD layer
Dual layer disc
Hybrid layer disc
HD layer
CD layer
HD layer
Hybrid Super Audio CD disc
CD layer that plays on any
CD player
- High Quality DSD Stereo
- High Quality DSD Multi-channel
High Density layer containing:
5 En
About discs and files
English
Introduction
1
Disc precautions
Be careful of scratches and dust
Blu-ray Disc, DVD and CD discs are sensitive to dust,
fingerprints and especially scratches. A scratched disc
may not be able to be played back. Handle discs with
care and store them in a safe place.
Proper disc storage
Handling precautions
Cleaning the pick up lens
Never use commercially available cleaning discs.
The use of these discs can damage the lens.
Request the nearest service center approved by
Yamaha to clean the lens.
Notice for watching 3D video
images
Some people may experience discomfort (such as
eye strain, fatigue, or nausea) while watching 3D
video images. We recommend that all viewers take
regular breaks while watching 3D video images.
If you experience any discomfort, stop watching the
3D video images until the discomfort subsides.
Consult a doctor if you experience severe
discomfort.
Read the owner’s manuals (Blu-ray Disc and TV)
and/or the caution messages that appear on the TV
carefully.
The vision of young children (especially those under
six years old) is still under development. Consult
your doctor (such as a pediatrician or eye doctor)
before allowing young children to watch 3D video
images.
Adults should supervise young children to ensure
they follow the recommendations described above.
Cinavia technology
Cinavia technology is a part of the content protection
system included in your Blu-ray Disc Player.
The following messages may be displayed and
playback stopped or audio outputs temporarily
muted by your Blu-ray Disc player if you are playing
an unauthorized copy of content that is protected by
Cinavia technology.
These messages are displayed in English only.
Cinavia Notice
This product uses Cinavia technology to limit the use of
unauthorized copies of some commercially-produced film
and videos and their soundtracks. When a prohibited use
of an unauthorized copy is detected, a message will be
displayed and playback or copying will be interrupted.
More information about Cinavia technology is provided at
the Cinavia Online Consumer Information Center at
http://www.cinavia.com
. To request additional
information about Cinavia by mail, send a postcard with
your mailing address to: Cinavia Consumer Information
Center, P.O. Box 86851, San Diego, CA, 92138, USA.
Place the disc in the center of the disc case
and store the case and disc upright.
Avoid storing discs in locations subject to
direct sunlight, close to heating appliances
or in locations of high humidity.
Do not drop discs or subject them to
strong vibrations or impacts.
Avoid storing discs in locations where
there are large amounts of dust or
moisture.
If the surface is soiled, wipe gently with a
soft, damp (water only) cloth. When
wiping discs, always move the cloth from
the center hole toward the outer edge.
Do not use record cleaning sprays,
benzene, thinner, static electricity
prevention liquids or any other solvent.
Do not touch the surface.
Do not stick paper or adhesive labels to the disc.
If the playing surface of a disc is soiled or scratched,
the Player may decide that the disc is incompatible
and eject the disc tray, or it may fail to play the disc
correctly. Wipe any dirt off the playing surface with
a soft cloth.
Note
Playback stopped. The content being played is
protected by Cinavia® and is not authorized for
playback on this device.
For more information, see http://www.cinavia.com
.
Message Code 1.
Audio outputs temporarily muted. Do not adjust
the playback volume. The content being played
is protected by Cinavia® and is not authorized
for playback on this device.
For more information, see http://www.cinavia.com
.
Message Code 3.
6 En
Front panel
1 p (On/Standby)
Turns this Player on/Sets to standby mode.
Press and hold p on the front panel for more than 5
seconds to reset this Player (system reset).
2 USB connector (p. 16)
3 SA-CD indicator
Lights up when an SA-CD is loaded and the SA-CD
layer (p. 4) is selected.
4 Front panel display
Displays various information for operational status.
5 Disc tray door
6 (Eject)
Opens/Closes the disc tray.
7 (Search backward/Skip backward)
Press to skip backward, and press and hold to search
backward.
8 (Search forward/Skip forward)
Press to skip forward, and press and hold to search
forward.
9 (Play)
Starts a playback.
0 (Pause)
Pauses a playback.
A (Stop)
Stops a playback.
Remove the protective film from the front panel before operating the Player.
Controls and functions
USB
5#%&
2 5 61 43 7 8 9 0 A
Note
7 En
Controls and functions
English
Introduction
1
Rear panel
1 AUDIO OUT (L/R) (p. 13)
2 HDMI (p. 11)
3 DIGITAL OUT (COAXIAL/OPTICAL) (p. 13)
4 USB (p. 16)
5 NETWORK (p. 14)
6 REMOTE CONTROL (OUT/IN) (p. 17)
7 AC IN (p. 17)
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT
NETWORK
USB
HDMI
REMOTE CONTROL
OUT IN
AC IN
1 6 72 3 45
8 En
Controls and functions
Remote control
will appear on the top left corner of the screen
when the pressed button is not available.
1 Infrared signal transmitter: Outputs infrared
signal. Aim this window to the remote control sensor
(p. 10).
2 p: Turns this Player on or sets it to standby mode.
3 : Opens/closes the disc tray.
4 Color buttons : Use these buttons according to
on-screen instructions.
ZOOM : Zooms in/out. The
size of the screen will change each time you press the
button (zoom in/out: 3 steps each).
PROGRAM : Sets the order of playback
(p. 25). You can set up to 15 tracks (for an audio disc)
or titles/chapters (DVD-Video).
SHUFFLE :
Selects shuffle play mode (p. 23).
REPEAT
: Changes repeat mode. Repeat mode shown
below will change each time you press the button.
: Repeats the title being played back.
: Repeats the chapter being played back.
: Repeats the folder being played back.
: Repeats all tracks/files on the disc.
: Repeats the track/file being played back.
5 Number buttons: Enters numbers, or during
playback, jumps to the track/chapter corresponding to
the number you input. These buttons may not be
available depending on the disc type and playback
condition.
6 CLEAR: Clears entered number/set item.
7 PIP : Turns on/off the Picture in Picture (p. 26).
PIP Mark ( ) is displayed on the screen when this
function is available. You can also select this item from
On Screen menu (p. 23).
PIP Mark is displayed only when the PIP Mark is set
to on (p. 31).
8 MIRACAST: Starts Miracast (p. 22).
9 2ND AUDIO : Selects the secondary audio of the
Picture in Picture (p. 26) or audio commentaries. The
Secondary Audio Mark ( ) is displayed on the
screen when this function is available (p. 34). You can
also select this item from On Screen menu (p. 23).
Secondary Audio Mark is displayed only when
Secondary Audio Mark is set to on (p. 31).
0 HOME: Displays the HOME menu screen (p. 19).
Note
PROGRAM SHUFFLE REPEAT
REPEAT A/B
ZOOM
AUDIO
SUBTITTLE
ANGLE
SEARCH
MIRACAST
CLEAR
PIP
HOME
2ND
AUDIO
ENTER
TOP MENU
RETURN ON SCREEN
POP-UP MENU
SETUP
STATUSSETUP
RED
GREEN BLUE
YELLOW
L
N
J
K
H
E
M
I
0
7
6
5
D
4
3
8
A
9
C
B
E
F
2
1
G
Note
Note
BD
DVD VIDEO
PHOTO
DVD
CD
DVD
CD
VIDEO
PHOTO
BD
DVD
CD
PHOTO
BD
BD
9 En
Controls and functions
English
Introduction
1
A TOP MENU : Displays the top menu
screen if the disc contains a menu. Select the desired
item using 5/a/2/3 and ENTER.
Specific operations may be different depending on
the disc. Follow the instructions of each menu
screen.
B Cursor buttons (5/a/2/3): Moves the focus in
the menu screen.
ENTER: Selects the focused menu/item.
C RETURN: Returns to the previous menu or screen,
etc.
D Control buttons
: Stops playback.
: Pauses playback.
: Plays back contents.
/: Skips backward/forward.
/
:
Searches backward/forward. The search speed will
change each time you press the button (search
backward/forward: 5 steps each). Press to resume
normal playback.
: Changes the speed of a slide show (slower/
faster: 3 steps).
/
:
Press for instant search/replay. Instant search skips the
content 30 seconds. Instant replay replays the content
from 10 seconds before.
E SETUP: Displays SETUP menu screen (p. 27).
F STATUS: Displays the playback information (p. 24).
G REPEAT A/B :
Plays back a specific part you want to repeat.
1 Press REPEAT A/B at the scene where you want to
set the start point. “A-” is displayed on the screen.
2 Press REPEAT A/B again at the scene where you
want to set the end point. “A-B” is displayed on the
screen. Repeat playback starts.
3
To cancel the repeat playback, press
REPEAT A/B
.
“A-B” disappears and the repeat playback is
finished.
This function cannot be performed depending on the
specifications of the disc.
H SUBTITLE : Changes subtitle
languages (p. 42) if available. You can also select this
item from On Screen menu (p. 23).
I ANGLE : Changes the camera angle if
video is recorded with multiple angles. The Angle
Mark ( ) is displayed on the screen when this
function is available. You can also select this item
from On Screen menu (p. 23).
Angle Mark is displayed only when the Angle Mark
is set to on (p. 31).
J AUDIO : Changes the audio language or
format. You can also select this item from On Screen
menu (p. 23).
K SEARCH :
Jumps to a specified point during playback. For details
on this function, refer to “Using Search” (p. 25). You
can also select this item from status menu (p. 24).
L YouTube: Starts YouTube (p. 21).
M POP-UP/MENU : Displays pop-up
menu. The menu contents displayed vary depending
on the disc. For details on how to see and operate the
pop-up menu, refer to the manual for the disc.
The top menu screen may be displayed by pressing
POP-UP/MENU depending on the DVD.
N ON SCREEN: Displays On Screen menu (p. 23).
Note
Note
BD
DVD
BD
DVD
CD
VIDEO MUSIC PHOTO
BD
DVD
CD
VIDEO MUSIC
PHOTO
BD
DVD
CD
VIDEO MUSIC
BD
DVD CD VIDEO MUSIC
Note
BD DVD
BD DVD
BD
DVD
BD
DVD
CD
BD
DVD
10 En
Controls and functions
Loading the batteries in the remote
control
Change both batteries when the operation range of
the remote control decreases.
Use AAA, R03, UM-4 batteries.
Make sure that the polarities are correct. Refer to the
illustration inside the battery compartment.
Remove the batteries if the remote control is not to
be used for an extended period of time.
Do not use old batteries together with new ones.
Do not use different types of batteries (such as
alkaline and manganese batteries) together. Read the
packaging carefully as these different types of
batteries may have the same shape and color.
If the batteries have leaked, dispose of them
immediately. Avoid touching the leaked material or
letting it come into contact with clothing, etc. Clean
the battery compartment thoroughly before installing
new batteries.
Do not throw away batteries with general house
waste; dispose of them correctly in accordance with
your local regulations.
Keep batteries away from children. If a battery is
accidentally swallowed, contact your doctor
immediately.
When not planning to use the remote control for long
periods of time, remove the batteries from the
remote control.
Do not charge or disassemble the supplied batteries.
Approximate operating range of
remote control
ID function
When using multiple Yamaha products, the remote control
may work on another Yamaha product or another remote
control may work on this Player. In this case, change the
remote control ID to prevent unwanted operation. If you
have changed the remote control ID, make sure that you
select the same ID for the main unit.
The default setting is ID1.
1 Remote control setting
To change the ID from ID1 to ID2, press and hold
the red color button and 2 of number button
simultaneously for 7 seconds. To change the ID
from ID2 to ID1, press and hold the red color button
and 1 of number button simultaneously for 7
seconds.
2 Main unit setting
Press and hold and on the
front panel simultaneously for 2 seconds to display
current ID when:
No disc is inserted in this Player.
The disc tray is closed.
Playback is stopped.
“NO DISC” is displayed on the front panel
display.
Keep pressing and holding the keys for another 2
seconds to change the ID between ID1 and ID2.
If the remote control is without batteries for a few
minutes or if exhausted batteries remain in the
remote control, the remote control ID is
automatically set to ID1. If you want to use the
remote control in ID2 setting, install new batteries
and set the remote control ID again.
When this Player is reset, its remote control ID will
be ID1.
Notes
1
3
22
USB
SA-CD
30°30°
Remote control sensor
6 m (20 ft)
Notes
11 En
English
Connection
2
CONNECTION
Make the corresponding video/audio cable connections depending on the equipment you want to use.
See page 35 for information on the audio/video output formats.
Prepare commercially available cables required for connections. The type and number of cables you need vary
depending on the equipment to be connected.
Enjoying video/audio using a TV and an AV receiver
Refer to “Connecting to a TV via an AV receiver” (p. 12).
Enjoying video/audio using only a TV
Refer to “Connecting to a TV directly” (p. 12).
Enjoying video/audio using a TV and audio equipment
Refer to “Connecting to a TV and audio equipment” (p. 13).
About HDMI
To enjoy high quality video and digital sound through the
HDMI terminal, use commercially available HIGH
SPEED HDMI cables that have the HDMI logo (as shown
on the back cover).
For information on the HDMI Control function, refer
to “HDMI Control” (p. 30).
To change the output mode of HDMI terminal,
configure “HDMI” (p. 34) in Audio Setting.
Connection for the playback of Blu-ray
3D Discs
To enjoy Blu-ray 3D Discs on this Player, your system
must meet the following conditions.
Your TV and AV receiver (if available) must support
the 3D feature.
3D Output in Display Setting (p. 32) is set to “Auto”.
Video/audio connections
Hints
USB
5#%&
This Player
AV receiver
TV
Video (HDMI)Video/audio
(HDMI)
Speakers
Audio
USB
5#%&
This Player
TV
Video/audio
(HDMI)
USB
5#%&
This Player
TV
Video (HDMI)
Audio
(coaxial, optical or analog)
Audio equipment
(such as sound bar)
Hints
12 En
Video/audio connections
Connecting to a TV via an AV
receiver
Connect this Player to the AV receiver and the AV
receiver to the TV with HDMI cables.
For details on speaker connections, refer to the owner’s
manuals of the AV receiver and speakers.
Caution!
Do not connect the power cable of this
Player until all connections are completed.
Connecting to a TV directly
Connect this Player to the TV with an HDMI cable.
Caution!
Do not connect the power cable of this
Player until all connections are completed.
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT
NETWORK
USB
HDMI
HDMI IN
HDMI OUT
HDMI IN
HDMI
This Player
AV receiver
TV
HDMI terminal
Speakers
HDMI cable
HDMI input
HDMI cable
HDMI output
HDMI input
Speaker
connections
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT
NETWORK
USB
HDMI
HDMI
HDMI IN
This Player
TV
HDMI terminal
HDMI cable
HDMI input
13 En
Video/audio connections
English
Connection
2
Connecting to a TV and audio equipment
Connect this Player to the TV with an HDMI cable, and this Player to the audio equipment with an audio cable (digital
optical, digital coaxial or stereo pin cable).
Caution!
Do not connect the power cable of this Player until all connections are completed.
To change the output mode of COAXIAL/OPTICAL jacks, configure “Coaxial/Optical” (p. 34) in Audio Setting.
If the playback audio is output from both the TV speakers and audio equipment, set HDMI in Audio Setting to Off
to disable the audio output to the TV.
Audio signals of SACDs cannot be output from the COAXIAL or OPTICAL jack (p. 35).
Hints
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT
NETWORK
USB
HDMI
HDMI
HDMI IN
COAXIAL
OPTICAL
AUDIO OUT
COAXIAL OPTICALAUDIO
This Player
TV
OPTICAL, COAXIAL or
AUDIO OUT L/R jacks
Audio cable
(digital optical, digital coaxial or
stereo pin cable).
Audio input
(digital optical, digital coaxial or
analog stereo)
Audio equipment
(such as sound bar)
HDMI input
HDMI cable
HDMI output
14 En
By connecting this Player to the network (wireless or wired), you can use the following features.
Playing back DLNA server (PC or NAS) contents (p. 19)
Playing back various network service contents (p. 21)
Playing BD-Live compatible discs (p. 25)
Operating this Player from mobile devices (AV CONTROLLER) (p. 22)
To use the network services or BD-Live feature, a broadband internet connection is required.
Refer to the operation manual of the equipment you have as the connected equipment and connection method may
differ depending on your network environment.
Use a network cable/router supporting 10BASE-T/100BASE-TX.
If you are using a router that supports DHCP, you do not need to configure any network settings for this Player, as
the network parameters (such as the IP address) will be assigned automatically to it. You only need to configure
the network settings if your router does not support DHCP or if you want to configure the network parameters
manually (p. 32).
Wireless connection
By using the Wi-Fi feature of this Player, you can connect
this Player to your network (router) wirelessly. To use the
Wi-Fi feature, refer to “Wireless connection setting
(p. 18) and configure the wireless connection setting.
Wired connection
Connect this Player to your network (router) with a
commercially available Shielded Twisted Pair (STP)
network cable.
Network connection
Notes
Hint
USB
5#%&
This Player
Internet Modem Router PC
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT
NETWORK
USB
HDMI
REMOTE
C
OUT
LAN
NETWORK
This Player
Internet Modem Router PC
NETWORK
terminal
Network cable
LAN terminal
15 En
Network connection
English
Connection
2
DLNA server setup
By using DLNA, you can share multimedia contents (such as videos, music and photos) stored on your DLNA server
(PC or NAS) connected to your network, and enjoy those contents with this Player.
In addition, you can use your mobile device (such as a smartphone and a tablet) as a wireless controller to operate this
Player through the network.
To use the DLNA features, perform the following DLNA server setup after making the network connection (p. 14).
To use DLNA features, all the devices must be connected to the same network.
To use a NAS as a DLNA server, the NAS must be compatible with DLNA.
Media sharing setting on DLNA server
To play back multimedia contents stored on your DLNA
server (PC or NAS), first you need to configure the media
sharing setting on the DLNA server software installed on
the DLNA server.
For information about DLNA server setting or file
formats supported by DLNA server, refer to the
owner’s manuals of your DLNA server and its
software.
1 Turn on your DLNA server (PC or NAS) and this
Player.
2 If you are using a PC as a DLNA server, check that
DLNA server software (such as Windows Media
Player 12) is installed on your PC.
3 On your DLNA server, enable media sharing and allow
media to be shared with this Player.
Now the DLNA server setting is complete. To enjoy
the DLNA server contents on this Player, select a
DLNA server and multimedia file from the HOME
menu (p. 19).
Using a mobile device as a media
controller
If you have a mobile device (such as smartphone and
tablet) that supports the Digital Media Controller (DMC)
feature, you can operate this Player from your smart phone
or tablet through the network.
To allow the mobile device to control this Player, set
DMC Control (p. 32) in the SETUP menu to Enable
(default).
To check that your mobile device supports the DMC
feature, refer to the owner’s manuals of your mobile
device and its software.
Notes
USB
5#%&
DLNA
This Player
DLNA server
(PC or NAS)
Remote control Controller
(mobile device)
Hint
Hints
16 En
By connecting a USB memory device to the USB connector on the front or the rear panel of this Player, you can play
multi-media files stored on the USB memory device (p. 19).
Yamaha cannot guarantee that all brands’ USB memory devices will operate with this Player.
Connect a USB memory device to one of the USB connectors (front/rear) of this Player when using BD-Live
feature (p. 26).
USB connection
Notes
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT
NETWORK
USB
HDMI
USB
USB
USB
This Player
USB connector (front)
This Player
USB memory device
USB connector (rear)
USB memory device
17 En
English
Connection
2
Connecting to the REMOTE
CONTROL jacks
You can transmit and receive the remote control
signals by connecting to the REMOTE CONTROL
(OUT/IN) jacks.
Firmly connect monaural 3.5 mm mini plug cables
(commercially available) to the REMOTE
CONTROL (OUT/IN) jacks.
If your AV receiver is a Yamaha product and has the
capability to transmit SCENE control signals from
the REMOTE OUT jack, you can control the Player
with the SCENE function.
Caution!
Do not connect the power cable of this
Player until all connections are completed.
For details about the SCENE function, refer to the
owner’s manual supplied with your Yamaha AV
receiver.
You can connect a Yamaha component (such as CD
player) supports the SCENE function to the
REMOTE CONTROL (OUT) jack of this Player.
Connecting the power cable
After all connections are completed, plug the
supplied power cable into the AC IN on the rear of
the Player. Then plug into AC outlet.
Other connections
NETWORK
USB
REMOTE CONTROL
OUT IN
REMOTE CONTROL IN
REMOTE CONTROL OUT
This Player
To REMOTE
CONTROL (IN)
jack
Monaural 3.5 mm mini
plug cable
To remote
control out
jack
Yamaha component
To remote
control in
jack
Monaural 3.5 mm
mini plug cable
Infrared signal receiver
or Yamaha component
(such as AV receiver)
To REMOTE
CONTROL
(OUT) jack
Hints
AC IN
To AC outlet
18 En
PLAYBACK
Setting with the Easy Setup
Easy Setup allows you to set language, resolution, and
screen aspect ratio easily. Easy Setup screen is displayed
when you turn this Player on for the first time after
purchase. Same setting can be performed from SETUP
menu = System = Easy Setup.
1 When Easy Setup screen is displayed, press ENTER to
start Easy Setup.
2 Set the language, resolution, and screen aspect ratio by
following the on-screen messages.
When no picture is displayed after Easy Setup is
completed, refer to “Troubleshooting” (p. 39).
A warning message concerning 3D video playback
appears when this Player is turned on. Press ENTER
to dismiss the message or CLEAR to disable it
(p. 30).
Wireless connection setting
To connect this Player to your network (router) wirelessly,
follow the procedure below to configure the wireless
connection setting.
If your router (access point) supports the WPS (Wi-Fi
Protected Setup) function, you can use the auto setup
method to connect this Player to the router without
entering network information (such as SSID) manually.
1 Press SETUP to display the SETUP menu screen.
2 Select General Setting = Network = Connection
setting = Wireless.
3 Press 2/3 to select Yes, then press ENTER.
4 Press 2/3 to select one of the following setup
methods, then press ENTER.
Scan: Select this option to search for available wireless
networks. When the network list is displayed, select the
SSID to be connected and enter the password.
Manual: Select this option to enter the network
information (such as SSID) manually.
Auto: Select this option to use the WPS function. Select
PBC (Push Button Configuration) or PIN code method,
then follow the on-screen messages.
For details on operations of your router (access
point), refer to the owner’s manual of it.
When the WPS function does not work, select
“Scan” or “Manual” to configure the wireless
connection settings.
Devices that use a 2.4 GHz frequency band, such as
a microwave, Bluetooth, or digital cordless device,
may interrupt the wireless communication. Move
this Player away from such devices, or turn off such
devices.
The speed of a wireless network connection depends
on your network environment (router type, distance
between the router and this Player, installation
places, etc.). In case the sound or video is interrupted
during playback, move this Player closer to the
router or change the orientation of this Player or the
antenna of the router.
Initial settings
Notes
Notes
19 En
English
Playback
3
The HOME menu allows you to perform the following basic operations of this Player.
Browsing and playing multi-media files on various discs, USB memory devices and your DLNA servers (PC or
NAS)
Accessing to various network services (p. 21)
Displaying the SETUP menu (p. 27)
For details on playable discs and formats, see page 3.
To play DLNA server contents on this Player, the media sharing setting (p. 15) on the DLNA server should be
configured.
Playing back photo/music/video
Basic operation
2/3/5/a: Moves the focus.
2: Returns to the parent folder.
HOME: Moves to/exits HOME menu screen.
ENTER: Confirms the folder/file.
Common operations for playing back
files in a selected folder
Example: Selecting a movie file on a USB memory
device
Stop the playback of the video before you move to
HOME menu screen.
1 Press HOME to move to HOME menu screen.
2 Press 5/a to select the item which contains the file
you want to play back, then press ENTER.
If your DLNA server is not listed, check that the
DLNA server is turned on and select DLNA Search
to update the list.
3 Select the Photo, Music, Video or AVCHD folder you
want to play back, then press ENTER.
To return to the parent folder, press RETURN or select
.
HOME menu
Hints
Note
MIRACAST
PIP
HOME
2ND
AUDIO
ENTER
TOP MENU
RETURN ON SCREEN
POP-UP MENU
SETUP
Note
Continued to the next page. \
20 En
HOME menu
Note that the only the file type selected on this step
will be displayed in the following step. For example,
if you selected Photo folder in this step, only photo
files are displayed after this step.
4 Select the folder containing the file you want to play
back.
5 Select the file you want to play back, then press
ENTER.
When a video file is selected, playback starts.
When a music file is selected, status screen is displayed
and playback starts.
When a photo file is selected, slide show starts.
To enjoy slide show with music, press HOME to
return to the HOME menu screen while music is
played back, and select photo file.
The displayed file may not be played back
depending on the content.
Operations for viewing photos
While viewing photos, the buttons on the remote control
work as shown below.
: Stops slide show and returns to the file browser.
: Pauses a slide show.
: Plays a slide show.
: Moves to a next photo.
: Moves to a previous photo.
: Makes a slide show faster in 3 steps.
: Makes a slide show slower in 3 steps.
5: Inverts a photo.
a: Reflects a photo.
2: Rotates a photo counterclockwise.
3: Rotates a photo clockwise.
ZOOM: Zooms in/out a photo (zoom in/out: 3 steps each).
5/a/2/3: Pans in zoom mode when a photo is larger
than the screen.
Note
Hint
Note
21 En
English
Playback
3
You can enjoy multimedia contents (such as photos and videos) using the following network services.
Dropbox
Picasa Web Albums
YouTube
Access to content provided by third parties requires a high speed internet connection and may also require account
registration and a paid subscription.
Third party content services may be changed, suspended, interrupted, or discontinued at any time without notice,
and Yamaha disclaims any liability in connection with such occurrences.
Some content may only be available for specific countries and may be presented in specific languages.
Yamaha does not represent or warrant that content services will continue to be provided or available for a particular
period of time, and any such warranty, express or implied, is disclaimed.
1 Press HOME to move to HOME menu screen.
To directly move to the YouTube menu screen, press
YouTube.
2 Press 5/a to select Network Services, then press
ENTER.
3 Press 2/3/5/a to select the desired network service,
then press ENTER.
4 Press 2/3/5/a to select an item, then press ENTER
to confirm the selection (or start playback).
To exit from each network service, press HOME.
Operation procedures after step 4 vary depending on
the menu items provided by each service.
About Dropbox™
Dropbox is a network service that allows you to put your
stuff in Dropbox and get it from your computers, phones,
or tablets. Automatically add photos and show off video
from anywhere.
More information at www.dropbox.com
About Picasa™ Web Albums
Picasa Web Albums is a network service that allows users
to share photos with friends and family, or explorer public
photos.
More information at picasaweb.google.com
About YouTube™
YouTube is a network service that allows users to
discover, watch and share originally-created videos over
the Internet.
More information at www.youtube.com
Using network services
Notes
Hint
Hint
Note
Dropbox is a trademark of Dropbox Inc.
Picasa and the Picasa logo are trademarks of Google. Inc.
YouTube and the YouTube logo are trademarks of
Google. Inc.
22 En
Miracast is a solution for seamlessly displaying video between devices, without cables or a network connection via an
access point (Wi-Fi Direct). You can do things like view pictures from a Miracast-compatible device (smartphone, etc.)
on the screen of the TV connected to this Player.
To check if your device is Miracast compliant, refer to the owner’s manual of the device.
When Miracast is enabled on this Player, other network functions (such as DLNA) are not available.
1 Press MIRACAST.
2 Within 60 seconds, operate your smartphone to enable
Miracast and select this Player as the device to be
connected.
For details on operations of your smartphone, refer to
the owner’s manual of it.
3 To exit from Miracast, press MIRACAST.
You can also exit from Miracast by pressing HOME
or RETURN.
By using the application “AV CONTROLLER” on your mobile device, you can use the mobile device as a remote
control and operate this Player from it.
You can control the basic functions of Yamaha Blu-ray Disc™ players such as Play, Pause, Skip, Power and
cursor navigations.
The application “AV CONTROLLER” is available in many languages.
For more information about “AV CONTROLLER”, visit the Yamaha website.
Enjoying smartphone pictures and videos
on the TV screen (Miracast™)
Notes
USB
5#%&
Miracast-compatible
device
(smartphone, etc.)
This Player
TV
Hint
Depending on the environment, audio/video may be interrupted or noise may appear on the TV screen. In this case,
try the following solutions.
Move the Miracast device closer to this Player.
Turn off other wireless devices not in use.
Move the Miracast device and this Player away from microwave ovens, Bluetooth devices or other wireless
devices.
Operating this Player from mobile devices (AV CONTROLLER)
AV CONTROLLER
23 En
English
Playback
3
This chapter explains playback of commercially available
Blu-ray Discs, DVDs, SA-CDs, CDs, and recorded DVD-
RW/R discs.
For the basic playback operation, see page 8.
On Screen menu
To display On Screen menu, press ON SCREEN. After
that, press 5/a/2/3 to select an item, then press ENTER
to operate the desired function.
On Screen menu contains following items.
Title : Shows the title number being
played back. You can skip to the desired title by selecting
it from this item.
Chapter : Shows the chapter
number being played back. You can skip to the desired
chapter by selecting it from this item.
Track/File : Shows
track/file number being played back. You can skip to the
desired track/file by selecting it from this item.
Time : Shows the
playback time. Select display type from the following:
Elapsed playback time of the title, chapter, disc,
track or file
Remaining playback time of the title, chapter, disc,
track or file
Mode/Play Mode
: Shows current
playback mode. You can select playback mode from the
following:
Normal: Normal playback.
Shuffle: Random playback without repetition.
Random: Random playback with repetition.
Normal
Shuffle CH (chapter)
Shuffle TT (title)
Shuffle All
Random CH (chapter)
Random TT (title)
Random All
Normal
Shuffle F (folder)
Random F (folder)
Audio : Shows audio language/
signal of a Blu-ray Disc/DVD currently selected. You can
select the desired type of audio.
Angle : Shows the currently-selected angle
number. If the video is recorded with multiple angles, you
can change the angle.
Subtitle : Shows the currently-
selected subtitle language when the subtitle is provided.
Subtitle Style : Shows the currently-selected
subtitle style. This function is available only for Video-file
external subtitle. You can select the desired text style of
subtitle.
Bitrate : Shows
bitrate of the audio/video signal.
Second Video : Turns the PIP on/off (p. 8).
Second Audio : Turns the secondary audio on/off
(p. 8).
Ins Search
: Skips 30 seconds.
Ins Replay
: Replays the content
from 10 seconds before.
CC Select
:
Sets th
e displayed closed caption.
Slide Show :
Shows slide show speed. You can select the slide show
speed from Slow/Medium/Fast.
Transition : Shows how photo appears on the
screen. You can select the transition type.
Code Page : Selects character code of subtitle
you added to DivX video (p. 41).
Advanced playback operation
Note
BD
DVD
BD
DVD
CD
PHOTO
BD
DVD
CD
VIDEO MUSIC
DVD
CD
PHOTO
CD
DVD
VIDEO MUSIC PHOTO
BD DVD
BD
DVD
BD
DVD
BD
BD DVD CD VIDEO MUSIC
BD
BD
BD DVD CD VIDEO MUSIC
BD
DVD
CD
VIDEO MUSIC
BD DVD
PHOTO
PHOTO
VIDEO
24 En
Advanced playback operation
Status menu
This shows various settings, such as subtitles, angle
settings and the title/chapter/track number currently
played back. To display status menu, press STATUS.
Status menu contains following menus.
Example: Icons when playing a Blu-ray Disc
1 (Playback status)
2 (Disc type/video file icon)
3 (Title number being played): You can jump to
specified title with SEARCH button (p. 9).
4 (Chapter number being played): You can
jump to specified chapter with SEARCH button (p. 9).
5 (Elapsed playback time): You can jump to
specified point with SEARCH button (p. 9).
6
(Repeat mode):
Shows current repeat mode (p. 8).
7 (Audio currently selected): You can change the
audio language or format with AUDIO button.
8 (Subtitle currently selected): You can change
the subtitle language with SUBTITLE button.
Example: Icons when playing a music file
1 (Playback status)
2
(Repeat mode):
Shows current repeat mode (p. 8).
3 (Disc type/music file icon)
4 (Artwork) : Displays artwork if the file
contains it.
5 (Track/file number being played): You can
jump to specified track with SEARCH button (p. 9).
6 (Information) : Displays music information
if the file contains them.
7 (Elapsed playback time): You can jump to
specified point with SEARCH button (p. 9).
8 (Progress bar) : Shows progress status of
current song.
1 (Playback status)
2 (Photo file icon)
3 (File number being displayed)
4
(Repeat mode):
Shows current repeat mode (p. 8).
5 (Slide show speed)
BD
DVD
VIDEO
1 2 3 4 5
6 7 8
DVD
CD
MUSIC
PHOTO
1 2 3 4 5
25 En
Advanced playback operation
English
Playback
3
Program play
This allows you to program playback order of audio disc
tracks or DVD chapters.
Press PROGRAM during playback to display the
PROGRAM window to program playback order.
You can program up to 15 tracks/chapters.
Example: Programming the playback order of CD tracks
1 Press PROGRAM during playback.
2 Press ENTER to program playback order.
For audio disc, press 5/a to select a desired track then
press ENTER.
For DVD-Video disc, select a desired title (shown as
TT) and chapter (shown as CH) instead of a track.
To clear a set track, select the track you want to clear,
then press CLEAR.
Press RETURN to cancel the Program play.
3 After programming is finished, press to set and
start program playback.
4 To cancel program play, stop playback completely by
pressing .
Using Search
This allows you to jump to the specified point during
playback.
1 Press SEARCH during playback. Status bar appears.
2 Press 5/a/2/3 to select one of the item below, then
press ENTER.
:
Title number (shown as )
Chapter number (shown as )
Elapsed title time (shown as )
Elapsed chapter time (shown as )
:
Track number (shown as )
Elapsed track time (shown as )
Elapsed disc time (shown as )
:
File number (shown as )
Elapsed file time (shown as )
:
File number (shown as )
3 Press 5/a or number buttons to set/adjust the value of
the focused item, and press ENTER to jump to the
specified point.
4 To close the status bar, press STATUS.
Enjoying BONUSVIEW™ and BD-
Live™
This Player supports BONUSVIEW (p. 41) (BD-ROM
Profile 1 Version 1.1) and BD-Live (p. 41) (BD-ROM
Profile 2) playback functions.
Functions and playback method vary depending on
the disc. See the guidance on the disc or the supplied
user’s manual.
DVD
CD
Note
BD
DVD
CD
MUSIC
PHOTO
BD DVD
CD
VIDEO MUSIC
PHOTO
26 En
Advanced playback operation
Using Picture in Picture function
(secondary audio/video playback)
BD-Video that includes secondary audio and video
compatible with Picture in Picture can be played back
with secondary audio and video simultaneously as a small
video in the corner.
While PIP Mark ( ) or Secondary
Audio Mark ( ) is displayed, press
PIP to turn the Picture in Picture
function on/off.
To listen to secondary audio, make sure that the
Audio Output setting (Coaxial / Optical or HDMI) is
set to PCM or Reencode (p. 34).
Depending on the disc, to listen to secondary audio,
you may need to set secondary audio to on from the
top menu of the disc (p. 9).
The secondary audio and video for Picture in Picture
may automatically play back and be removed
depending on the content. Also, playable areas may
be restricted.
Using the feature of BD-Live™
1. Set the Network setting (p. 31).
2. Connect the USB memory device
to this Player (p. 16).
BD-Live data is saved in a USB memory device
connected to this Player. To enjoy these functions,
connect a USB memory device supporting USB 2.0
High Speed (480 Mbit/s) to one of the USB
connectors (front/rear) of this Player to use the USB
memory device as Local Storage.
Local Storage is used as an auxiliary memory when
Blu-ray Disc is played back.
Use a USB memory device with at least 2GB of free
space.
BUDA folder is created automatically in the USB
memory device when necessary.
If there is insufficient storage space, the data will not
be copied/downloaded. Delete unneeded data or use
a new USB memory device.
Some time may be required for the data to load
(read/write).
Yamaha cannot guarantee that all brands’ USB
memory devices will operate with this Player.
Do not use a USB extension cable when connecting
a USB memory device to the USB connector of the
Player. Using a USB extension cable may prevent
the Player from performing correctly.
3. Play back the disc.
4. Run BD-Live according to the
instructions on the disc.
Do not remove the USB memory device or disconnect
unplug the power cable during BD-Live operations.
Regarding playback method of BD-Live contents,
etc., perform the operations in accordance with the
instructions in the Blu-ray Disc manual.
To enjoy BD-Live functions, perform the network
connection (p. 14) and Network settings (p. 31).
Refer to “BD-Live Connection” (p. 32) regarding the
setup to restrict access to BD-Live contents.
The time required to download the provided programs
into the USB memory device connected to this Player
varies depending on the internet connection speeds
and the data volume of the programs.
BD-Live programs provided through the internet
may not be able to display the connection depending
on the status (upgrading) of the provider. In such
cases, take out the disc and try again.
If the BD-Live screen does not appear for a while
after you select the BD-Live function in the Blu-ray
Disc menu, the USB memory device may not have
enough free space. In such cases, eject the disc from
the Player, and then erase the data in the USB
memory device using the “Format” menu in the
“Local Storage” (p. 30).
Notes
Primary video Secondary video
Notes
Notes
27 En
English
Settings
4
SETTINGS
The SETUP menu enables various audio/visual settings and adjustments for functions using the remote control unit.
SETUP menu
Menu/Submenu Item Function Page
General Setting
System Auto Power
Standby
Sets the power-saving function to on/off.
30
HDMI Control Sets this Player to receive control signal from the remote
control of your TV/AV receiver.
30
Load Default Resets all settings to the default setting except Security
setting.
30
Upgrade Performs upgrade of this Player. 30
Upgrade
Notification
Selects whether to display the message on the screen when
this Player detects newer software over the Internet.
30
3D Playback
Message
Displays a warning message concerning 3D video playback
when this Player is turned on.
30
Local Storage Displays the free space of USB memory device connected to
this Player, or formats the “BUDA” folder in the USB
memory device.
30
Easy Setup Sets language, resolution, screen aspect ratio. 30
Language OSD Selects the language for On Screen Display. 30
Menu Prioritizes the language for disc menu. 31
Audio Prioritizes the language for audio. 31
Subtitle Prioritizes the language for subtitle. 31
Playback Disc Auto Playback Sets this Player to start disc playback automatically. 31
Angle Mark Sets to display the Angle Mark when Blu-ray Disc/DVD with
multiple angles is played back.
31
PIP Mark Sets to display the PIP Mark when Blu-ray Disc/DVD with
Picture in Picture is played back.
31
Secondary Audio
Mark
Sets to display the Secondary Audio Mark when Blu-ray
Disc/DVD with secondary audio is played back.
31
Last Memory Sets this Player to remember the last playback position of a
disc (Blu-ray or DVD video) when it is set to standby mode
or the disc tray is opened.
31
DivX(R) VOD
DRM
Displays registration code for DivX(R) video.
31
DivX Subtitle Selects whether to display a subtitle for DivX(R) video. 31
Security Change Password Changes password for Parental Control and Country Code. 31
Parental Control Sets the Parental Control depending on the disc content. 31
Country Code Sets your Country Code. 31
Network Connection Setting Sets a network connection method. 31
Information Displays network information screen. 31
Connection Test Performs the network connection test. 32
IP Setting Sets the IP setting to Auto/Manual. 32
Proxy Setting Sets the proxy setting. 32
Network Control Sets the control for devices, which are connected via
Ethernet, to On/Off.
32
Network Standby Selects whether this Player can be turned on from other
network devices.
32
DMC Control Selects whether to allow DLNA-compatible Digital Media
Controller (DMC) (p. 15) to control this Player.
32
BD-Live
Connection
Sets the BD-Live connection to Permitted/Partial Permitted/
Prohibited.
32
28 En
SETUP menu
Display Setting
TV 3D Output Selects 3D or 2D videos. 32
TV Screen Sets the screen aspect ratio of the connected TV, and adjust
the video output.
32
HDMI Resolution Selects the HDMI video output resolution. 33
TV System Selects the TV System from NTSC/PAL/Multi. 33
Color Space Selects Color Space from YCbCr 4:4:4/YCbCr 4:2:2/Full
RGB/RGB.
33
HDMI Deep Color Selects HDMI Deep Color from 30 bits/36 bits/48 bits/Off. 33
HDMI 1080p 24Hz Sets HDMI 1080p 24Hz to auto/off. 33
Video Process Noise Reduction Sets the level of Noise Reduction. 33
De-interlacing
Mode
Sets how to detect the video signal.
33
Closed Caption CC Attribute Sets the appearance of closed captions. 33
Font color
Font size
Font style
Font opacity
Font edge
Font edge color
BG color
BG opacity
Window color
Window opacity
Customize the font, background and window used for closed
captions when CC Attribute is set to Custom.
33
Audio Setting
Audio Output Coaxial / Optical Selects the output mode of COAXIAL jack/OPTICAL
terminal from Bitstream/PCM/Reencode/Off.
34
HDMI Selects the output mode of HDMI terminal from Bitstream/
PCM/Reencode/Off.
34
Downsampling Selects the digital audio signal down sampling frequency
from 48K/96K/192K.
34
DRC Sets the DRC (Dynamic Range Compression). 34
SACD Output SACD Priority Selects the playing back priority for 2-channel contents or
multi-channel contents, when the disc contains both types of
contents.
34
SACD/CD Layer Selects the layer to be played when an SA-CD/CD hybrid
disc is played back.
34
Speaker Setting 2ch Downmix Sets the audio output from AUDIO OUT L/R jack. 34
Post Process UpMix Multi-channelizes the 2-channel audio signal. 34
System
Information
Displays software version and MAC address (p. 42).
34
Menu/Submenu Item Function Page
29 En
SETUP menu
English
Settings
4
Example of SETUP menu
operation
You need to call up the SETUP menu screen to perform
settings for this Player. The following is the explanation
for basic operations of the SETUP menu.
Example: Setting Disc Auto Playback
Some items cannot be set during playback. In this
case, press to stop playback completely before
setting.
1. Display the SETUP menu screen.
Press SETUP to display the SETUP menu screen.
Press 2/3 to select General Setting, then press
ENTER or a.
2. Select a Submenu.
Press 5/a to select Playback, then press ENTER or
cursor 3.
3. Select a menu item.
Press 5/a to select Disc Auto Playback, then press
ENTER or cursor 3.
4. Select a desired setting.
Press 5/a to select On or Off, then press ENTER.
You need to use the number buttons to enter
numbers (such as password) for some menu items.
5. Exit the menu screen.
Press 2 to return to the previous menu.
Note
REPEAT A/B
AUDIO
SUBTITTLE
ANGLE
SEARCH
MIRACAST
CLEAR
PIP
HOME
2ND
AUDIO
ENTER
TOP MENU
RETURN ON SCREEN
POP-UP MENU
SETUP
STATUSSETUP
Hint
30 En
SETUP menu
General Setting
The default settings are marked with “
*
”.
System
Auto Power Standby
Sets the power-saving function to on/off.
When set to on, this Player will switch to screen saver
mode if there is no operation for 5 minutes. After that, this
Player will turn to standby mode when there is no
operation for 15 minutes.
On
*
, Off
HDMI Control
You can set the Player to receive control signal from a
TV/AV receiver compatible with the HDMI Control
function via an HDMI cable (p. 11).
On, Off
*
Load Default
You can reset all settings of this Player to default setting
except Security setting (p. 31). For details on default
settings, see pages 27–34.
Upgrade
You can upgrade the software manually from USB
Storage or Network. For details on software upgrade, refer
to “Software upgrade” (p. 37).
Upgrade Notification
You can select whether to display the message on the
screen when this Player detects newer software over the
Internet.
On
*
, Off
3D Playback Message
You can turn on or off a warning message concerning 3D
video playback that appears on the TV when this Player is
turned on.
On
*
, Off
Local Storage
You can check the free space of USB memory device
connected to this Player, or format (empty) the “BUDA”
folder in the USB memory device connected to this Player
by selecting Format.
To enjoy the BD-Live feature (p. 26), you need to
connect a USB memory device (with at least 2GB of
free space) to one of the USB connectors (front/rear)
of this Player to use the USB memory device as
Local Storage.
Easy Setup
You can perform Easy Setup (p. 18).
Language
OSD
You can select the language for On Screen Display which
is the messages or menu displayed on the screen such as
SETUP menu.
English, Français, Español, Deutsch, Italiano, Svenska,
Nederlandse, Polski, Pyccкий, 中文
Using HDMI Control function
Using the HDMI Control function, you can interactively
operate this Player with your TV (HDMI Control
function supported).
When you connect this Player to the TV compatible with
the HDMI Control function using an HDMI cable and
set HDMI Control in the SETUP menu to on (p. 30), you
can perform the function listed below.
• Automatic input select function
When you start playback of this Player, the input
selector of the TV (and an AV receiver if this Player is
connected to the TV via the AV receiver) is switched
to this Player automatically. TV Power is turned on
automatically depending on the TV.
• Automatic power off function
When you turn off the TV while this Player is in stop
mode and the SETUP menu screen is not displayed,
the power of this Player is also turned off
automatically.
HDMI Control function may not work properly
depending on the TV.
Functions other than ones shown above may work
depending on the TV or AV receiver.
In order to make the HDMI Control function
available, set up settings for the HDMI Control
function on ALL components (this Player, TV,
and AV receiver). Certain operation may also be
required.
Each function may be set independently to
activate/deactivate depending on the TV.
Refer to the operation manuals supplied with the
TV and/or AV receiver for details regarding setup.
When set to on, power consumption during
standby mode increases due to HDMI Control
function.
Notes
Hint
31 En
SETUP menu
English
Settings
4
Menu
You can prioritize the language for disc menu.
English, Français, 中文 , Español, Deutsch, Italiano,
Nederlandse, Portuguese, Danish, Svenska, Finnish,
Norwegian, Polski, Pyccкий, Korean, Japanese, More
Audio
You can prioritize the audio language for Blu-ray Disc/
DVD playback. For details on setting items, see “Menu”
(p. 31).
Subtitle
You can prioritize the language for Subtitle.
English, Français, 中文 , Español, Deutsch, Italiano,
Nederlandse, Portuguese, Danish, Svenska, Finnish,
Norwegian, Polski, Pyccкий, Korean, Japanese, More, Off
(The default settings in [Language] differ depending on
your model.)
Playback
Disc Auto Playback
You can set Disc Auto Playback to on/off. When set to on,
a disc will play back automatically after loading.
On
*
, Off
Angle Mark
You can set to display the Angle Mark ( ) when
Blu-ray Disc/DVD with multiple angles is played back.
On
*
, Off
PIP Mark
You can set to display the PIP Mark ( ) when Blu-ray
Disc with picture in picture (p. 26) is played back.
On
*
, Off
Secondary Audio Mark
You can set to display the Secondary Audio Mark ( )
when Blu-ray Disc with secondary audio is played back.
On
*
, Off
Last Memory
You can set whether this Player remembers the last
playback position of a disc (Blu-ray or DVD video) when
it is set to standby mode or the disc tray is opened.
On
*
, Off
Some discs are not compatible with this function.
DivX(R) VOD DRM
You can display registration code for DivX(R) video.
DivX Subtitle
You can select whether to display a subtitle for DivX(R)
video.
On, Off
*
Security
Change Password
You can set the password for changing the Parental
Control Level and Country Code. Refer to “Parental
Control” (p. 31) and “Country Code” (p. 31).
The default password is 0000.
If you forget the password, refer to
“Troubleshooting” (p. 38) and set all the Security
settings to their default settings.
Parental Control
In some Blu-ray Discs/DVDs, a control level for disc
viewing is set depending on the age of the viewer. You
can set the Parental Control shown on the screen
depending on the disc content.
The password (see “Change Password” on p. 31) needs to
be entered before the Parental Control Levels is set.
After you set the Parental Control, when you play back a
disc with level higher than current Parental Control Level,
or you want to change the Parental Control Level, a dialog
box will pop up to ask you to enter the password.
Off*, 1–8
Country Code
You can set the Country Code you live in. The password
(see “Change Password” on p. 31) needs to be entered
before the Country Code is set. This setting may be used
for rating of Parental Control and disc playback.
Network
Connection Setting
You can select a network connection method.
Information
You can display network information screen. On this
screen, you can view the information of Interface
(Ethernet), Address Type, IP Address, Subnet Mask,
Default Gateway, and DNS.
Note
Notes
Wired* Connects the network using Ethernet.
Wireless Connects the network using a wireless LAN.
You can select settings for a wireless LAN
connection. Follow the on-screen instructions to
proceed.
Scan
Searches for an access point. You can connect the
access point that is found.
Manual
You can manually set information for an access
point.
Auto
If your access point supports the WPS (Wi-Fi
Protected Setup) function, you can use the auto setup
method to connect this Player to the access point
without entering information manually. Select PBC
(Push Button Configuration) or PIN code method.
32 En
SETUP menu
Connection Test
You can perform an internet connection test. If the test is
failed, please check “IP Setting” (p. 32) and perform the
test again.
IP Setting
You can configure the network settings.
Numeric keys Enters characters.
2/3 Moves the highlight.
CLEAR Deletes a character.
ENTER Saves the settings and exits from
the menu.
Proxy Setting
You can set Proxy Setting. Set to Disable for normal use.
Set to Enable to set the proxy setting.
Network Control
Sets the control for devices, which are connected via
Ethernet, to On/Off. When On with filter is selected, you
can specify the MAC addresses of the network devices
that will be permitted access to this Player. This Player
employs Yamaha Network Control protocol (YNC).
On
*
, On with filter, Off
When Network Control is enable, power
consumption during standby mode increases due to
network control function.
When set to On, the system startup time is
decreased.
Network Standby
You can select whether this Player can be turned on from
other network devices such as “AV CONTROLLER”
(p. 22).
On, Off
*
This setting is available only when Network Control
is enabled.
DMC Control
You can select whether to allow DLNA-compatible
Digital Media Controller (DMC) (p. 15) to control this
Player.
Enable
*
, Disable
BD-Live Connection
You can set access restriction to BD-Live contents.
Display Setting
The default settings are marked with “
*
”.
TV
3D Output
You can select 3D or 2D video output from this Player.
Even if you set “3D Output” to “Auto” and play
back a Blu-ray 3D Disc, this Player selects 2D
images depending on the setting of TV, etc.
TV Screen
You can set the screen aspect ratio of the connected TV,
and adjust the video output.
If you switch your TV (i.e. because you have bought a
new one) and the screen aspect ratio of the connected TV
changes, you will have to change the TV Screen setting.
Auto* Select to automatically configure the network
settings of this Player with the DHCP server.
Manual Select to configure the network settings (IP Address,
Subnet Mask, Default Gateway, and DNS) manually.
Hints
Disable
*
Sets proxy server to disable. Select this item when
proxy server is not used.
Enable Enables proxy host and proxy port setting.
Proxy Host Sets proxy host.
Proxy Port Sets proxy port.
Notes
Note
Permitted Allows all BD-Live discs to connect the network.
Partial
Permitted
*
Allows only discs with owner certification.
Prohibited Prohibits all BD-Live discs to connect the network.
Auto* This Player automatically selects 3D or 2D videos.
Off This Player always selects 2D videos.
Note
16:9 Full Select this when this Player is connected to a TV
with a 16:9 screen. When a 4:3 aspect ratio video is
played back, the video is displayed as shown below.
16:9 Normal
*
Select this when this Player is connected to a TV
with a 16:9 screen. When a 4:3 aspect ratio video is
played back, the video is displayed as shown below.
4:3 Pan Scan Select this when this Player is connected to a TV
with a 4:3 screen. When a 16:9 aspect ratio video is
played back, the video is displayed as shown below.
4:3 Letter BoxSelect this when this Player is connected to a TV
with a 4:3 screen. When a 16:9 aspect ratio video is
played back, the video is displayed as shown below.
Original
image size
On 16:9 (wide screen) TV
16:9 Full 16:9 Normal
4:3
Original
image size
On 4:3 TV
4:3 Pan Scan 4:3 Letter Box
16:9
33 En
SETUP menu
English
Settings
4
HDMI Resolution
You can select the HDMI video output resolution. For
more details on output formats, refer to “About the HDMI
video output formats” (p. 36).
When set to Auto, resolution is set to the maximum
resolution according to the connected TV.
When set to Disc Native, the original resolution and video
frequency, recorded in the Blu-ray Disc or DVD that is
played back, are used. You can use a video up-converter
function of an external device.
When other than a Blu-ray Disc or DVD is played back,
the resolution and video frequency will work as Auto.
If a Blu-ray Disc or DVD whose resolution and video
frequency are not compatible with the connected TV, no
image will be output. In this case, stop playback, and
select an option other than Disc Native.
Auto
*
, Disc Native, 480i/576i, 480p/576p, 720p, 1080i, 1080p
To output HD audio (Dolby TrueHD or DTS-HD
Master Audio) from HDMI terminal, set HDMI
Resolution to Auto or more than 720p.
TV System
You can select TV System from PAL, NTSC and Multi.
Set the same TV System as your TV set. For more details
on output formats, refer to “About the HDMI video output
formats” (p. 36).
Color Space
You can select the Color Space (p. 41) output from
HDMI. This function is available when this Player is
connected with an HDMI cable.
This function is only available on TVs that support
this function.
HDMI Deep Color
When your TV and/or AV receiver is compatible with
Deep Color (p. 41), set this item according to your TV/AV
receiver. This function is available when this Player is
connected with an HDMI cable.
30 bits, 36 bits, 48 bits, Off
*
HDMI 1080p 24Hz
This outputs the BD-Video encoded in 24Hz frame rate in
HDMI 1080p 24Hz. Smoother video playback may be
available with this function. This function is available
when your TV/AV receiver support this function. For
more details on output formats, refer to “About the HDMI
video output formats” (p. 36).
Auto
*
, Off
This setting is disabled when output resolution is
other than 1080p.
Video Process
Noise Reduction
You can set the Noise Reduction to a level of 0 to 3. 0 is
off, and 3 is the maximum level.
0, 1, 2
*
, 3
De-interlacing Mode
You can select how to detect the video signal. Set to Auto
for normal use. When horizontal stripping noise appears
on the screen, set this to Film/Video to remove the noise.
Auto
*
, Film, Video
Closed Caption
CC Attribute
You can set the appearance of closed captions. When Auto
is selected, digital closed captions will be displayed in
default settings. When Custom is selected, you can
customize the appearance of closed captions (Font color,
Font size, etc.) manually.
Auto, Custom
Font color, Font size, Font style,
Font opacity, Font edge, Font edge color,
BG color, BG opacity, Window color,
Window opacity
Customize the font, background and window used for
closed captions when CC Attribute is set to Custom.
Note
NTSC, PAL, Multi
(The default setting differs depending on your model.)
YCbCr 4:4:4
*
Sets Color Space to YCbCr 4:4:4.
YCbCr 4:2:2 Sets Color Space to YCbCr 4:2:2.
Full RGB When RGB is set and white and black on the screen
are too faint, select this item. This setting is effective
when a connected component supports RGB 0–255
range.
RGB Outputs video signal at normal signal range.
Note
Note
34 En
SETUP menu
Audio Setting
The default settings are marked with “
*
”.
Audio Output
Coaxial / Optical
You can select the output mode of COAXIAL jack and
OPTICAL terminal. For more details on output formats,
refer to “About the audio output formats” (p. 35).
HDMI
You can select the output mode of HDMI terminal. For
details on setting items, see “Coaxial / Optical” (p. 34). For
more details on output formats, refer to “About the audio
output formats” (p. 35).
Bitstream
*
, PCM, Reencode, Off
To output HD audio (Dolby TrueHD or DTS-HD
Master Audio) from HDMI terminal, set HDMI
Resolution to Auto or more than 720p (p. 33).
Downsampling
You can select digital audio signal down-sample
frequency. This function is effective for the audio signal
output from the COAXIAL jack/OPTICAL terminal.
DRC
You can set the DRC (Dynamic Range Compression)
(p. 41) to on/off/Auto. When set to Auto, DRC is
automatically turned on for a source with DRC
information in Dolby TrueHD format. DRC makes the
strong sound such as plosive sound lower, and
conversations more audible. It is useful when you watch
movies in the night.
Off, On, Auto
*
SACD Output
SACD Priority
Selects the playing back priority for 2-channel contents or
multi-channel contents, when the disc contains both types
of contents.
Multi-ch
*
, 2-ch
SACD/CD Layer
Selects the layer to be played when an SA-CD/CD hybrid
disc is played back.
SACD
*
, CD
The SA-CD indicator on the front panel lights up
when an SA-CD is loaded and the SA-CD layer is
selected.
This setting is only available when no disc is loaded.
Audio signals are not output from the COAXIAL or
OPTICAL jack (p. 13) when the SA-CD layer is
selected.
Speaker Setting
2ch Downmix
You can select down mix method to analog 2-ch from
Stereo or Lt/Rt.
Post Process
UpMix
You can multi-channelize the 2-channel audio signal. To
multi-channelize, select DTS NEO:6, then select Cinema
or Music mode.
Off
*
, DTS NEO:6
System Information
Software version and MAC address (p. 42) are displayed.
Bitstream Outputs digital signal without any processing.
Secondary Audio is not output.
PCM Outputs 2-channel PCM.
Reencode
*
Outputs Bitstream with Secondary Audio.
Off Mutes sound.
Note
48K
*
The highest sampling rate of digital PCM output is
48 kHz.
96K The highest sampling rate of digital PCM output is
96 kHz.
192K The highest sampling rate of digital PCM output is
192 kHz.
Hint
Notes
Stereo
*
Changes channel output to stereo, which only
delivers sound from the two front speakers.
Lt/Rt Select this item if this unit is connected to a Dolby
Pro Logic decoder. Sound from rear speakers is
mixed to the 2-ch stereo sound.
35 En
SETUP menu
English
Settings
4
About the audio output formats
*1 “SA” is a Secondary Audio. “BCS” is a button click sound, the sound effect for pop-up menus, etc.
*2 For USB, DLNA and network services, PCM and mixed 2ch are not available (muted).
*3 For USB, DLNA and network services, Reencode is not available (output audio will be same format as bitstream).
When Coaxial / Optical or HDMI is set to Bitstream, secondary audio is not output. (p. 34)
To output HD audio (Dolby TrueHD or DTS-HD Master Audio) from HDMI terminal, set HDMI Resolution to
Auto or more than 720p (p. 33).
SA-CD output formats
Source format
HDMI COAXIAL / OPTICAL MIXED 2CH
Bitstream PCM Reencode Bitstream PCM Reencode
PCM 2ch
with SA or
BCS
*1
PCM 2ch Dolby Digital PCM 2ch Dolby Digital 2ch
without SA or
BCS
*1
PCM 2ch PCM 2ch 2ch
PCM 5.1ch
with SA or
BCS
*1
PCM 5.1ch Dolby Digital PCM 2ch Dolby Digital 2ch
without SA or
BCS
*1
PCM 5.1ch PCM 2ch 2ch
PCM 7.1ch
with SA or
BCS
*1
PCM 7.1ch Dolby Digital PCM 2ch Dolby Digital 2ch
without SA or
BCS
*1
PCM 7.1ch PCM 2ch 2ch
Dolby Digital
with SA or
BCS
*1
Dolby Digital
PCM up to
5.1ch
Dolby Digital Dolby Digital PCM 2ch Dolby Digital 2ch
without SA
or
BCS
*1
Dolby Digital
Plus
with SA or
BCS
*1
Dolby Digital
Plus
PCM up to
7.1ch
Dolby Digital
Dolby Digital PCM 2ch Dolby Digital 2ch
without SA
or
BCS
*1
Dolby Digital
Plus
Dolby
TrueHD
with SA or
BCS
*1
Dolby
TrueHD
PCM up to
7.1ch
Dolby Digital
Dolby Digital PCM 2ch Dolby Digital 2ch
without SA
or
BCS
*1
Dolby
TrueHD
DTS
with SA or
BCS
*1
DTS
PCM up to
5.1ch
*2
DTS
*3
DTS
PCM 2ch
*2
DTS
*3
2ch
*2
without SA
or
BCS
*1
DTS HD High
Resolution
with SA or
BCS
*1
DTS-HD High
Resolution
PCM up to
7.1ch
*2
DTS
*3
DTS
PCM 2ch
*2
DTS
*3
2ch
*2
without SA
or
BCS
*1
DTS HD High
Resolution
*3
DTS-HD
Master Audio
with SA or
BCS
*1
DTS-HD
Master Audio
PCM up to
7.1ch
*2
DTS
*3
DTS
PCM 2ch
*2
DTS
*3
2ch
*2
without SA
or
BCS
*1
DTS-HD
Master
Audio
*3
Notes
SACD Priority setting (p. 34)
HDMI COAXIAL / OPTICAL
MIXED 2CH
Multi-ch PCM up to 5.1ch No output 2ch
2-ch PCM up to 2ch No output 2ch
36 En
SETUP menu
About the HDMI video output formats
When TV System is set to NTSC
When TV System is set to PAL
*1 Resolution will be set to the maximum resolution supported by the connected TV. For example, when the maximum
resolution supported by the connected TV is 1080p, the resolution will be set to 1080p.
*2 Resolution and frequency will be that of the source disc.
*3 If Auto is set for HDMI 1080p 24Hz and the connected TV supports 1080p 24Hz content, 1080p 24 Hz will be output
instead of 1080p 50/60 Hz.
When TV System is set to Multi
When TV System is set to Multi, video signal is output at the same frequency as the source. Refer to the tables above for
details on the frequency setting of the TV and resolution of the output video signal.
HDMI 1080p 24Hz setting is disabled when output resolution is other than 1080p.
When TV System is set to NTSC and video source is not 60 Hz, the video output signal is converted to 60 Hz.
When TV System is set to PAL and video source is not 50 Hz, the video output signal is converted to 50 Hz.
Contents
HDMI Resolution
Auto Disc Native 1080p 1080i 720p 480p/576p 480i/576i
BD-Video with
1080p/24Hz content
*
1
1080p 24Hz
1080p 24Hz/
60Hz
*3
1080i 60Hz 720p 60Hz 480p 480i
BD-Video without
1080p/24Hz content
*
1
*
2
1080p 60Hz 1080i 60Hz 720p 60Hz 480p 480i
DVD-Video
*
1
*
2
1080p 60Hz 1080i 60Hz 720p 60Hz 480p 480i
Others
*
1
*
1
1080p 60Hz 1080i 60Hz 720p 60Hz 480p 480i
Contents
HDMI Resolution
Auto Disc Native 1080p 1080i 720p 480p/576p 480i/576i
BD-Video with
1080p/24Hz content
*
1
1080p 24Hz
1080p 24Hz/
50Hz
*3
1080i 50Hz 720p 50Hz 576p 576i
BD-Video without
1080p/24Hz content
*
1
*
2
1080p 50Hz 1080i 50Hz 720p 50Hz 576p 576i
DVD-Video
*
1
*
2
1080p 50Hz 1080i 50Hz 720p 50Hz 576p 576i
Others
*
1
*
1
1080p 50Hz 1080i 50Hz 720p 50Hz 576p 576i
Notes
37 En
English
Settings
4
New software that provides additional features or product improvements will be released as needed. We recommend
upgrading the software of this Player to the latest version periodically.
To check for the availability of a software upgrade, visit
http://download.yamaha.com/
Do not remove the USB memory device, set this Player to standby mode or unplug the power cable/network cable
while the software upgrade is being performed.
Upgrading the software
1. Prepare for the software upgrade.
When you upgrade the software from USB Storage:
1 Save the upgrade file package to the appropriate
folder on the USB memory device. For more
details, refer to the procedure document attached
with the upgrade file package.
2 Connect the USB memory device.
When you upgrade the software from Network:
Confirm that this Player is connected to the
network.
2. Select the upgrade method and
start upgrade from SETUP menu.
1 Press SETUP to display SETUP menu screen.
2 Select General Setting = System = Upgrade.
3 Select the item which contains the upgrade file
package from USB Storage/Network.
The system will search for upgrade file package.
3. Upgrade the software by following
the on-screen messages.
Upgrade is completed. The system will be reset.
Software upgrade
Note
38 En
ADDITIONAL INFORMATION
Refer to the table below when this Player does not function properly. If the problem you are experiencing is not listed
below or if the instruction below does not help, turn off this Player, disconnect the power cable, and contact the nearest
authorized Yamaha dealer or service center.
Power
Basic operation
Disc playback
Troubleshooting
Problem Possible causes and solutions
No power. Connect the AC power cable properly.
Press p on the front panel to turn on the power.
The Player power is turned off. This Player will be automatically turned off after 20 minutes of inactivity (no playback)
when Auto Power Standby (p. 30) is set to on.
Problem Possible causes and solutions
The remote control does not work. Use the remote control within its operating range. (p. 10)
Replace the batteries. (p. 10)
Check the ID settings for the main unit and the remote control. The remote control ID
on the main unit may be changed after the main unit is reset. In this case, verify the
remote control ID on the main unit, and set it again if needed. (p. 10)
Buttons do not work.
Press and hold p on the front panel for more than 5 seconds to reset this Player.
To completely reset this Player, unplug the power cable from the AC outlet for 30
seconds or more, plug the power cable to the AC outlet again, and then turn on this
Player.
Password is forgotten.
Press and hold , and on the front panel simultaneously when no disc is
inserted and playback is stopped to set all the settings including Security settings (p. 31)
of this Player to their default settings. After the power is turned off automatically, press
p to turn on the power again.
Problem Possible causes and solutions
The Player cannot play a disc. Take out the disc and clean it. (p. 5)
Make sure that the disc is loaded properly (aligned in disc tray and label-side up). (p. 5)
Use a disc supported by the Player. (p. 3)
Remove the disc and then check whether the Player supports the disc or not. (p. 3)
Check the region code. (p. 3)
Check whether the disc is defective by trying another disc.
The CD-R/RW, DVD+R/RW/R DL, and DVD-R/RW/R DL must be finalized. (p. 3)
Video stops. The Player will stop if it senses shock or vibration.
The Player makes a snapping sound
when starting playback or loading a
disc.
These sounds are not malfunctions of the Player but are normal operating conditions.
It takes time to start Blu-ray disc
playback.
This player searches for a USB memory device used as Local Storage for BD-Live
feature (p. 26) when a Blu-ray disc is loaded. To reduce the waiting time, keep a USB
memory device connected to the one of the USB connectors (front/rear) of this Player
(p. 16).
39 En
Troubleshooting
English
Additional information
5
Picture
Sound
Network
Problem Possible causes and solutions
No picture. Make sure that the cables are connected correctly. (p. 11)
Make sure that the connected TV or the AV receiver is set to the correct input.
With no disc inserted, or playback stopped, press and hold and on the front
panel simultaneously to set video resolution to the default value.
If a picture is still not output, press and hold on the front panel for approximately 5
seconds to switch NTSC/PAL.
When set to Disc Native, a signal that is not compatible with the connected TV is
output. Change the setting to output a signal that is compatible with the connected TV.
(p. 33)
Make sure that the disc or file you are trying to play back is compatible with this Player
(p. 3).
Screen freezes and operation buttons
do not work.
Press , then restart playback.
Turn off the power and turn on the power again.
Press and hold p on the front panel for more than 5 seconds to reset this Player.
Video is not output with the desired
resolution.
Set to the desired resolution. (p. 33)
Wide-screen video appears vertically
stretched, or black bands appear at the
top and bottom of the screen. Or 4:3
video appears horizontally stretched.
Change the aspect ratio of your TV. (p. 32)
Square noise (mosaic) appears on the
screen.
Blocks in images may be visible in scenes with rapid movement due to the
characteristics of digital image compression technology.
Problem Possible causes and solutions
No sound, or sound is distorted. Check that the audio cable is connected correctly. (p. 11)
Turn the volume of TV or AV receiver up.
There is no sound during still mode, fast forward, and fast reverse. (p. 9)
Audio may not be output depending on the audio recording status, such as when audio
other than an audio signal or non-standard audio is recorded for the audio content. (p. 3)
Make sure that the disc or file you are trying to play back is compatible with this Player
(p. 3).
Left and right channels of audio are
reversed, or sound comes out of only
one side.
Check the audio connection. (p. 13)
Cannot hear the desired audio type and/
or number of channels.
Refer to Audio Output setting and “About the audio output formats”. (p. 34, p. 35)
Cannot hear the sound of PIP
(secondary audio).
Set Coaxial / Optical or HDMI to PCM/Reencode. (p. 34)
To hear secondary audio, press 2ND AUDIO. (p. 8)
Depending on the disc, you may need to set secondary audio on the top menu of the
disc. (p. 9)
Problem Possible causes and solutions
Cannot connect to the Internet. When connecting to the Internet by selecting Wired in Connection Setting, connect the
Network cable properly. (p. 31)
Turn on the connected equipment, such as broadband router or modem.
Connect the broadband router and/or modem properly.
If Wireless is selected in Connection Setting, and when you want to connect to the
Internet using Ethernet, select Wired properly. (p. 31)
Properly select Wireless in Connection Setting when you want to connect to the Internet
using a wireless LAN. (p. 31)
40 En
Troubleshooting
Messages on the screen
The following messages appear on the TV screen in case the disc you tried to play back is not appropriate or the
operation is not correct.
Cannot download BD-Live contents. Verify that this Player can connect to the Internet normally. Refer to “Connection Test”.
(p. 32)
Connect USB memory device properly. Check that the USB memory device is
connected to the USB connector of this Player. (p. 16)
Check if the Blu-ray Disc supports BD-Live.
Connect the USB memory device formatted in FAT16, FAT32, or NTFS.
It is recommended to connect the USB memory device with at least 2 GB of free space.
If there is not enough free space, format the USB memory device. (p. 30)
Refer to the supplied user’s manual of the disc or consult the disc manufacturer.
Cannot detect the DLNA server. Verify that this Player can connect to the network normally. Refer to “Connection
Test”. (p. 32)
Turn on the connected equipment, such as broadband router or the server.
Confirm the Player and the server are connected to the same router (or access point).
Depending on the DLNA server, the Player may need to be permitted from the server.
Depending on the DLNA server, it needs to change a firewall setting.
Cannot play the file on the DLNA server. Make sure the file is playable. (p. 3)
Check your DLNA server’s setting.
The playback and operating quality may be affected by your home network condition.
Cannot connect to the Internet via
Wireless LAN.
Make sure that the wireless LAN router is turned on.
Depending on the surrounding environment, such as the wall material, radio wave
receiving condition, or obstacles between the Player and the wireless LAN router, the
communication distance may be shortened. Move the Player and the wireless LAN
router closer to each other.
Devices that use a 2.4 GHz frequency band, such as a microwave, Bluetooth, or digital
cordless device, may interrupt the communication. Move the Player away from such
devices, or turn off such devices.
If the Internet connection using a wireless LAN is still not successful by the above
solutions, try using Ethernet by selecting Wired in Connection Setting. (p. 31)
Wireless network is not found or
distorted.
Make sure that the wireless LAN router is turned on.
Move this Player closer to the router or change the orientation of this Player or the
antenna of the wireless LAN router.
If the wireless connection cannot be configured using the WPS function, select another
option (Scan or Manual) (p. 18).
Make sure that the wireless network is not disturbed by microwave ovens, digital
cordless phones, or other neighboring Wi-Fi devices.
Microwave ovens, digital cordless phones or other wireless devices in your
neighborhood might disturb the wireless network. Turn off these devices.
Make sure that the firewalls in your network allow access to the wireless connection of
this Player.
If the wireless network does not work properly in your home, try the wired network
connection.
Error message Possible causes and solutions
Unsupported File The file is not supported with this Player. See “Types of discs/files that can be used with this Player”
(p. 3).
Wrong region code! The disc is an incompatible region code. See “Region management information for Blu-ray Disc/
DVD videos” (p. 3).
Network has FAILED. This Player cannot be connected to the network. Check connection (p. 14) and Network setting (p. 31).
Network is OK, proxy has
FAILED.
This Player cannot be connected to the proxy server. See “Proxy Setting” (p. 32).
BD-Live connection is
prohibited in SETUP menu.
BD-Live connection is prohibited. See “BD-Live Connection” (p. 32).
Upgrade has failed for some
reason!
Upgrade is failed. Check if the upgrade file is corrupted or unreadable.
IP Setting is not valid! Please
reset…
The IP Setting entered is not valid. Enter the correct information again.
Problem Possible causes and solutions
41 En
English
Additional information
5
AVCHD
AVCHD is a new format (standard) for high definition
video cameras that can be used to record and play high-
resolution HD images.
BD-Live™
BD-Live is a Blu-ray Disc standard that utilizes a
network connection, enabling this Player to go online to
download promotional videos and other data.
BDMV
BDMV (Blu-ray Disc Movie) refers to one of the
application formats used for BD-ROM which is one of
the Blu-ray Disc specifications. BDMV is a recording
format equivalent to DVD-Video of the DVD
specification.
Blu-ray 3D™
Blu-ray 3D enables you to view full high definition 3D
images.
BONUSVIEW™
BONUSVIEW compatible discs let you simultaneously
enjoy video sub-channel for two screens, audio sub-
channel and sub-titles. A small screen appears within
the main screen during playback (Picture in Picture).
Closed Caption
Closed captions are kind of subtitle, and the difference
between subtitles and captions is that subtitles are
intended for hearing persons and captions are for the
hearing impaired. Subtitles rarely show all of the audio.
For example, captions show sound effects (e.g., “phone
ringing” and “footsteps”), while subtitles do not. Before
you select this setting, please ensure that the disc
contains closed caption information.
Color Space
Color Space is a color range that can be represented.
RGB is a color space based on the RGB color model
(red, green and blue) and is typically used for PC
monitors. YCbCr is a color space based on a luminance
signal (Y) and two color difference signals (Cb and Cr).
Deep Color
Deep Color refers to the use of various color depths in
displays, up from the 24-bit depths in previous versions
of the HDMI specification. This extra bit depth allows
HDTVs and other displays go from millions of colors to
billions of colors and eliminate on-screen color banding
for smooth tonal transitions and subtle gradations
between colors. The increased contrast ratio can
represent many times more shades of gray between
black and white. Also Deep Color increases the number
of available colors within the boundaries defined by the
RGB or YCbCr color space.
DLNA
DLNA (Digital Living Network Alliance) provides easy
sharing of digital media through network in the home,
and you can enjoy digital contents stored on your
DLNA-server-software-installed PC or other DLNA
compatible device with your TV via this Player. To
connect this Player to your DLNA servers, some
settings for the DLNA server or device are required. For
details, refer to your DLNA server software or DLNA
device.
DivX®
DivX® is a digital video format created by DivX, LLC,
a subsidiary of Rovi Corporation. This is an official
DivX Certified® device that plays DivX video. Visit
divx.com for more information and software tools to
convert your files into DivX videos.
Dolby Digital
A sound system developed by Dolby Laboratories Inc.
that gives movie theater ambience to audio output when
the product is connected to a Dolby Digital processor or
amplifier.
Dolby Digital Plus
A sound system developed as an extension to Dolby
Digital. This audio coding technology supports 7.1
multi-channel surround sound.
Dolby TrueHD
Dolby TrueHD is a lossless coding technology that
supports up to 8 channels of multi-channel surround
sound for the next generation optical discs. The
reproduced sound is true to the original source bit-for-
bit.
DRC (Dynamic Range Control)
DRC lets you adjust the range between the loudest and
softest sounds (dynamic range) for playback at average
volume. Use this when it is hard to hear dialog, or
during times when playback may disturb neighbors.
DTS
This is a digital sound system developed by DTS, Inc.
for use in cinemas.
DTS-HD High Resolution Audio
DTS-HD High Resolution Audio is a new technology
developed for the next generation high definition optical
disc format.
DTS-HD Master Audio
DTS-HD Master Audio is a lossless audio compression
technology developed for the next generation high
definition optical disc format.
Glossary
42 En
Glossary
FLAC
FLAC (Free Lossless Audio Codec) is an open file
format for lossless audio data compression. While
inferior in compression rate to other lossy compressed
audio formats, it can often provide higher audio quality.
HDMI
HDMI (High-Definition Multimedia Interface) is an
interface that supports both video and audio on a single
digital connection. The HDMI connection carries
standard to high definition video signals and multi-
channel audio signals to AV components such as HDMI
equipped TVs, in digital form without degradation.
Letterbox (LB 4:3)
A screen size with black bars on the top and bottom of
the image to allow viewing of wide-screen (16:9)
material on a connected 4:3 TV.
Linear PCM Sound
Linear PCM is a signal recording format used for Audio
CDs and on some DVD and Blu-ray Discs. The sound
on Audio CDs is recorded at 44.1 kHz with 16 bits.
(Sound is recorded between 48 kHz with 16 bits and 96
kHz with 24 bits on DVD discs and between 48 kHz
with 16 bits and 192 kHz with 24 bits on Blu-ray Discs.)
Mac address
The Mac address is a unique value assigned to a network
device for identification purposes.
Pan Scan (PS 4:3)
A screen size that cuts off the sides of the image to allow
viewing of wide-screen (16:9) material on a connected
4:3 TV.
Subtitles
These are the lines of text appearing at the bottom of the
screen which translate or transcribe the dialog. They are
recorded on many DVDs and Blu-ray Discs.
x.v.Color
x.v.Color reproduces a greater range of color than
before, showing almost all of the colors that the human
eye can detect.
43 En
English
Additional information
5
General
Power supply
[U.K., Europe, Russia and Australia models]
................................................................................AC 110–240 V, 50 Hz
[Asia, and Central and South America models]
...........................................................................AC 110–240 V, 50/60 Hz
[Other models] .......................................................AC 110–240 V, 60 Hz
Power consumption .............................................................................. 17 W
Standby power consumption
HDMI Control Off, Network Standby Off.........................0.2 W (typical)
HDMI Control On, Network Standby Off .........................0.3 W (typical)
HDMI Control Off, Network Standby On .........................5.5 W (typical)
HDMI Control On, Network Standby On..........................5.5 W (typical)
Dimensions (W × H × D, including protrusions) ......... 435 × 86 × 257 mm
(17-1/8 × 3-3/8 × 10-1/8 in)
Weight ..................................................................................2.7 kg (6.0 lbs.)
Audio performance
Audio output level (1 kHz, 0 dB)
Blu-ray Disc/DVD/CD-DA.........................................................2 ± 0.3 V
Signal to noise ratio
Blu-ray Disc/DVD/CD-DA............................................................ 115 dB
Dynamic range
Blu-ray Disc/DVD ......................................................................... 105 dB
CD-DA ........................................................................................... 100 dB
Harmonic distortion (1 kHz)
Blu-ray Disc/DVD/CD-DA............................................................0.003%
Frequency Response
Blu-ray Disc/DVD .............................4 Hz to 22 kHz (48 kHz Sampling)
4 Hz to 44 kHz (96 kHz Sampling)
CD-DA ...............................................................................4 Hz to 20 kHz
Input/output
HDMI output ..............................................................Type A connector × 1
480i/576i/480p/576p/720p/1080i/1080p/1080p@24Hz,
Deep Color, x.v. Color support
Digital output.......................................................... Optical × 1, Coaxial × 1
Analog audio output ..............................................................Mixed 2 ch × 1
USB ............................................................................Type A connector × 2
Wireless LAN..................................................Standard: IEEE 802.11 b/g/n
Frequency range: 2.4GHz band
Other equipment ...........................................................Remote IN/OUT × 1
Ethernet × 1
Specifications are subject to change without notice.
Copyright
Audio-visual material may consist of copyrighted
works which must not be recorded without the
authority of the owner of the copyright. Refer to
relevant laws in your country.
“Blu-ray Disc™”, “Blu-ray™”, “Blu-ray 3D™”, “BD-
Live™”, “BONUSVIEW™”, and the logos are
trademarks of the Blu-ray Disc Association.
is a trademark of DVD Format/Logo Licensing
Corporation.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
Manufactured under license under U.S. Patent Nos:
5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,212,872;
7,333,929; 7,392,195; 7,272,567 & other U.S. and
worldwide patents issued & pending. DTS-HD, the
Symbol, & DTS-HD and the Symbol together are
registered trademarks & DTS-HD Master Audio is a
trademark of DTS, Inc.
Product includes software. © DTS, Inc. All Rights
Reserved.
“HDMI,” the “HDMI” logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC in the United States
and other countries.
x.v.Color™
“x.v.Color” and “x.v.Color” logo are trademarks of Sony
Corporation.
“AVCHD” and the “AVCHD” logo are trademarks of
Panasonic Corporation and Sony Corporation.
Specifications
Note
Continued to the next page. \
44 En
Specifications
Java is a registered trademark of Oracle and/or its
affiliates.
DLNA™ and DLNA CERTIFIED™ are trademarks or
registered trademarks of Digital Living Network Alliance.
All rights reserved. Unauthorized use is strictly prohibited.
The Wi-Fi CERTIFIED Logo is a certification mark of the
Wi-Fi Alliance.
The Wi-Fi Protected Setup Identifier Mark is a mark of
the Wi-Fi Alliance.
“Wi-Fi”, “Wi-Fi Protected Setup”, “Wi-Fi Direct” and
“Miracast” are marks or registered marks of the Wi-Fi
Alliance.
This product is licensed under the AVC patent portfolio
license and VC-1 patent portfolio license for the personal
and non-commercial use of a consumer to (i) encode video
in compliance with the AVC Standard and VC-1 Standard
(“AVC/VC-1 Video”) and/or (ii) decode AVC/VC-1
Video that was encoded by a consumer engaged in a
personal and non-commercial activity and/or was obtained
from a video provider licensed to provide AVC/VC-1
Video. No license is granted or shall be implied for any
other use. Additional information may be obtained from
MPEG LA, LLC. See http://www.mpegla.com.
This product is licensed under the MVC patent portfolio
license for the personal use of a consumer or other uses in
which it does not receive remuneration to (i) encode video
in compliance with the MVC Standard (“MVC Video”)
and/or (ii) decode MVC Video that was encoded by a
consumer engaged in a personal activity and/or was
obtained from a video provider licensed to provide MVC
Video. No license is granted or shall be implied for any
other use. Additional information may be obtained from
MPEG LA, LLC. See http://www.mpegla.com
Windows Media Player is a registered trademark or
trademark of Microsoft corporation in the United States
and/or other countries
Copyright 2004-2012 Verance Corporation. Cinavia® is a
Verance Corporation trademark. Protected by U.S. Patent
7,369,677 and worldwide patents issued and pending under
license from Verance Corporation. All rights reserved.
DivX®, DivX Certified®, DivX Plus® HD and associated
logos are trademarks of Rovi Corporation or its
subsidiaries and are used under license.
DivX Certified® to play DivX® and DivX Plus® HD
(H.264/.MKV) video up to 1080p HD including premium
content.
ABOUT DIVX VIDEO: DivX® is a digital video format
created by DivX, LLC, a subsidiary of Rovi Corporation.
This is an official DivX Certified® device that has passed
rigorous testing to verify that it plays DivX video. Visit
divx.com for more information and software tools to
convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified® device must be registered in order to play
purchased DivX Video-on-Demand (VOD) movies. To
obtain your registration code, locate the DivX VOD
section in your device setup menu. Go to vod.divx.com for
more information on how to complete your registration.
45 En
English
Additional information
5
ADDITIONAL INFORMATION
Numerics
2ch Downmix, SETUP menu ...............34
2ND AUDIO, remote control ................8
3D Output, SETUP menu ....................32
3D Playback Message,
SETUP menu ...................................30
A
A/B, remote control ...............................9
Angle Mark, SETUP menu ..................31
Angle, On Screen menu .......................23
ANGLE, remote control ........................9
Audio output formats ...........................35
Audio Output, SETUP menu ...............34
Audio Setting, SETUP menu ...............34
Audio, On Screen menu .......................23
AUDIO, remote control .........................9
Audio, SETUP menu ...........................31
Auto Power Standby, SETUP menu ....30
AV CONTROLLER ............................22
B
BD-Live ...............................................26
BD-Live Connection, SETUP menu ....32
Bitrate, On Screen menu ......................23
C
Change Password, SETUP menu .........31
Chapter, On Screen menu ....................23
CLEAR, remote control .........................8
Closed Caption, SETUP menu .............33
Coaxial / Optical, SETUP menu ..........34
Code Page, On Screen menu ................23
Color buttons, remote control ................8
Color Space, SETUP menu ..................33
Connection Setting, SETUP menu .......31
Connection Test, SETUP menu ...........32
Control buttons, remote control .............9
Country Code, SETUP menu ...............31
Cursor buttons, remote control ..............9
D
Data disc playback ...............................19
De-interlacing Mode, SETUP menu ....33
Digital Media Controller (DMC) .........15
Disc Auto Playback, SETUP menu .....31
Display Setting, SETUP menu .............32
DivX(R) VOD DRM, SETUP menu ...31
DLNA ..................................................15
Downsampling, SETUP menu .............34
DRC, SETUP menu .............................34
Dropbox ...............................................21
E
Easy Setup, SETUP menu ...................30
ENTER, remote control .........................9
G
General Setting, SETUP menu ............30
H
HDMI 1080p 24Hz, SETUP menu ......33
HDMI Control function ........................30
HDMI Control, SETUP menu ..............30
HDMI Deep Color, SETUP menu .......33
HDMI, SETUP menu ...........................34
HOME, remote control ...........................8
I
Information, SETUP menu ...................31
Ins Replay, On Screen menu ................23
Ins Search, On Screen menu ................23
IP Setting, SETUP menu ......................32
L
Language, SETUP menu ......................30
Last Memory, SETUP menu ................31
Load Default, SETUP menu ................30
Local Storage, SETUP menu ...............30
M
Menu, SETUP menu ............................31
Miracast ................................................22
Mode/Play Mode, On Screen menu .....23
N
Network Control, SETUP menu ..........32
Network, SETUP menu ........................31
Noise Reduction, SETUP menu ...........33
Number buttons, remote control ............8
O
On Screen menu ...................................23
ON SCREEN, remote control ................9
OSD, SETUP menu ..............................30
Other connections .................................17
P
Parental Control, SETUP menu ...........31
PBC (Push Button Configuration) .......31
Picasa Web Albums .............................21
Picture in Picture function ....................26
PIN code (WPS) ...................................31
PIP Mark, SETUP menu ......................31
PIP, remote control .................................8
Playback, SETUP menu .......................31
POP UP/MENU, remote control ............9
Post Process, SETUP menu ..................34
Program play ........................................25
PROGRAM, remote control ...................8
Proxy Setting, SETUP menu ................32
R
Remote control .......................................8
REPEAT, remote control .......................8
RETURN, remote control ......................9
S
SACD Output, SETUP menu ...............34
Search function .....................................25
SEARCH, remote control .......................9
Second Audio, On Screen menu .......... 23
Second Video, On Screen menu .......... 23
Secondary Audio Mark,
SETUP menu ................................... 31
Security, SETUP menu ........................ 31
SETUP menu ....................................... 27
SETUP menu operation ....................... 29
SETUP, remote control ......................... 9
SHUFFLE, remote control .................... 8
Slide Show, On Screen menu .............. 23
Software upgrade ................................. 37
Speaker Setting, SETUP menu ............ 34
Status menu ......................................... 24
STATUS, remote control ....................... 9
Subtitle Style, On Screen menu ........... 23
Subtitle, On Screen menu .................... 23
SUBTITLE, remote control ................... 9
Subtitle, SETUP menu ......................... 31
System Information, SETUP menu ..... 34
System, SETUP menu ......................... 30
T
Time, On Screen menu ........................ 23
Title, On Screen menu ......................... 23
TOP MENU, remote control ................. 9
Track/File, On Screen menu ................ 23
Transition, On Screen menu ................ 23
TV Screen, SETUP menu .................... 32
TV System, SETUP menu ................... 33
TV, SETUP menu ................................ 32
U
Upgrade Notification ........................... 30
Upgrade of software ............................ 37
Upgrade, SETUP menu ....................... 30
UpMix, SETUP menu ......................... 34
USB content playback ......................... 19
V
Video output formats ........................... 36
Video Process, SETUP menu .............. 33
W
WPS (Wi-Fi Protected Setup) ............. 31
Y
YouTube .............................................. 21
Z
ZOOM, remote control .......................... 8
Index
Attention-i Fr
1 Pour utiliser l’appareil au mieux de ses possibilités, lisez
attentivement ce mode d’emploi. Conservez-le
soigneusement pour référence.
2 Installez cet appareil dans un endroit frais, bien aéré, sec et
propre - à l’abri de la lumière du soleil, des sources de
chaleur, des vibrations, des poussières, de l’humidité et/ou du
froid. Pour une aération correcte, tenez compte des distances
minimales suivantes.
Haut : 10 cm
Arrière : 10 cm
Côtés : 10 cm
3 Placez l’appareil loin des équipements, moteurs et
transformateurs électriques, pour éviter les ronflements
parasites.
4 N’exposez pas l’appareil à des variations brutales de
température, ne le placez pas dans un environnement très
humide (par exemple dans une pièce contenant un
humidificateur) car cela peut entraîner la condensation
d’humidité à l’intérieur de l’appareil, qui elle-même peut être
responsable de décharge électrique, d’incendie, de dommage
à l’appareil ou de blessure corporelle.
5 Evitez d’installer l’appareil dans un endroit où des objets
peuvent tomber, ainsi que là où l’appareil pourrait être exposé
à des éclaboussures ou des gouttes d’eau. Sur le dessus de
l’appareil, ne placez pas :
d’autres appareils qui peuvent endommager la surface
de l’appareil ou provoquer sa décoloration.
des objets se consumant (par exemple, une bougie)
qui peuvent être responsables d’incendie, de
dommage à l’appareil ou de blessure corporelle.
des récipients contenant des liquides qui peuvent être
à l’origine de décharge électrique ou de dommage à
l’appareil.
6 Ne couvrez pas l’appareil d’un journal, d’une nappe, d’un
rideau, etc. car cela empêcherait l’évacuation de la chaleur.
Toute augmentation de la température intérieure de l’appareil
peut être responsable d’incendie, de dommage à l’appareil ou
de blessure corporelle.
7 Ne branchez pas la fiche du cordon d’alimentation de
l’appareil sur une prise secteur tant que tous les
raccordements n’ont pas été effectués.
8 Ne pas faire fonctionner l’appareil à l’envers. Il risquerait de
chauffer et d’être endommagé.
9 N’exercez aucune force excessive sur les commutateurs, les
boutons et les cordons.
10 Pour débrancher la fiche du cordon d’alimentation au niveau
de la prise secteur, saisissez la fiche et ne tirez pas sur le
cordon.
11 Ne nettoyez pas l’appareil au moyen d’un solvant chimique,
ce qui pourrait endommager la finition. Utilisez un chiffon
sec et propre.
12 N’alimentez l’appareil qu’à partir de la tension prescrite.
Alimenter l’appareil sous une tension plus élevée est
dangereux et peut être responsable d’incendie, de dommage à
l’appareil ou de blessure corporelle. Yamaha ne saurait être
tenue responsable des dommages résultant de l’alimentation
de l’appareil sous une tension autre que celle prescrite.
13 Pour empêcher tout dommage causé par les éclairs,
déconnectez la cordon d’alimentation de la prise murale
pendant un orage.
14 Ne tentez pas de modifier ni de réparer l’appareil. Consultez
le service Yamaha compétent pour toute réparation qui serait
requise. Le coffret de l’appareil ne doit jamais être ouvert,
quelle que soit la raison.
15 Si vous envisagez de ne pas vous servir de l’appareil pendant
une longue période (par exemple, pendant les vacances),
débranchez la fiche du cordon d’alimentation au niveau de la
prise secteur.
16 Lisez la section intitulée « Guide de dépannage » où figure
une liste d’erreurs de manipulation communes avant de
conclure que l’appareil présente une anomalie de
fonctionnement.
17 Avant de déplacer l’appareil, appuyez sur p pour placer
l’appareil en veille puis débranchez la fiche du cordon
d’alimentation au niveau de la prise secteur.
18 La condensation se forme lorsque la température ambiante
change brusquement. En ce cas, débranchez la fiche du
cordon d’alimentation et laissez l’appareil reposer.
19 La température de l’appareil peut augmenter en raison d’une
utilisation prolongée. En ce cas, coupez l’alimentation de
l’appareil et laissez-le au repos pour qu’il refroidisse.
20 Installez cet appareil à proximité de la prise secteur et à un
emplacement où la fiche du câble d’alimentation est
facilement accessible.
21 Les piles ne doivent pas être exposées à une chaleur extrême,
par exemple au soleil, à une flamme, etc.
SÉCURITÉ LASER
L’appareil utilise un laser. En raison des risques de
blessure des yeux, le retrait du couvercle ou les
réparations de l’appareil devront être confiés
exclusivement à un technicien d’entretien qualifié.
DANGER
Risque d’exposition au laser en cas d’ouverture. Eviter
l’exposition directe des yeux au faisceau. Lorsque cet
appareil est branché à la prise de courant, ne pas approcher
les yeux de l’ouverture du plateau changeur et des autres
ouvertures pour regarder à l’intérieur.
Attention : Veuillez lire ce qui suit avant d’utiliser l’appareil.
N’utilisez pas cet appareil à moins de 22 cm d’une
personne portant un stimulateur cardiaque ou un
défibrillateur.
Les ondes radio sont susceptibles d’affecter le
fonctionnement des équipements médicaux
électroniques. N’utilisez pas cet appareil à proximité
d’appareils médicaux ni dans l’enceinte d’un hôpital.
Cet appareil n’est pas déconnecté du secteur tant qu’il
reste branché à la prise de courant, même si l’appareil
en soi est éteint par la touche p. Il se trouve alors « en
veille ». Dans cet état, l’appareil consomme une très
faible quantité de courant.
Lorsqu'une prise secteur ou un prolongateur est utilisé
comme dispositif de débranchement, celui-ci doit rester
facilement accessible.
AVERTISSEMENT
POUR RÉDUIRE LES RISQUES DINCENDIE OU
DE DÉCHARGE ÉLECTRIQUE, N’EXPOSEZ PAS
CET APPAREIL À LA PLUIE OU À LHUMIDITÉ.
1 Fr
1
2
3
4
5
Français
Possibilités offertes par ce lecteur................... 2
Grande variété de disques et formats de fichiers compatibles
... 2
Fonctionnalités réseau améliorées ....................................... 2
Simplicité d’installation et d’utilisation............................... 2
Accessoires fournis........................................... 2
À propos des disques et des fichiers............... 3
Types de disques/fichiers utilisables avec ce lecteur........... 3
Chargement d’un disque...................................................... 4
Précautions d’emploi pour les disques................................. 5
Précautions concernant le visionnage d’images vidéo 3D... 5
Technologie Cinavia............................................................ 5
Commandes et fonctions .................................. 6
Panneau avant ...................................................................... 6
Panneau arrière .................................................................... 7
Télécommande..................................................................... 8
Raccordements vidéo/audio ........................... 11
Raccordement à un téléviseur via un ampli-tuner AV....... 12
Raccordement direct à un téléviseur.................................. 12
Raccordement à un téléviseur et à un dispositif audio....... 13
Raccordement réseau...................................... 14
Raccordement sans fil........................................................ 14
Raccordement filaire.......................................................... 14
Configuration du serveur DLNA....................................... 15
Raccordement USB.......................................... 16
Autres raccordements ..................................... 17
Raccordement aux connecteurs REMOTE CONTROL .... 17
Raccordement du cordon d’alimentation........................... 17
Réglages initiaux.............................................. 18
Configuration via Installation Facile ................................. 18
Configuration de connexion sans fil.................................. 18
Menu HOME ...................................................... 19
Lecture de photo/musique/vidéo........................................ 19
Utilisation des services réseau....................... 21
À propos de Dropbox™..................................................... 21
À propos des albums photo en ligne Picasa™................... 21
À propos de YouTube™.................................................... 21
Visionner les photos et vidéos d’un smartphone
sur un téléviseur (Miracast™)
......................... 22
Commander ce lecteur avec des dispositifs
mobiles (AV CONTROLLER) ....................... 22
Mode de lecture avancé................................... 23
Menu à l’écran ................................................................... 23
État, menu.......................................................................... 24
Programmation de l’ordre de lecture ................................. 25
Utilisation de la fonction de recherche ............................. 25
Utilisation des fonctions BONUSVIEW™ et BD-Live™
.... 25
Utilisation de la fonction d’incrustation
(lecture audio/vidéo secondaire)................................... 26
Utilisation de la fonction BD-Live™ ................................ 26
Menu SETUP..................................................... 27
Exemple d’utilisation du menu SETUP............................. 29
Réglages Généraux ............................................................ 30
Paramètres vidéo................................................................ 32
Paramètres audio................................................................ 34
Système d’information....................................................... 34
À propos des formats de sortie audio................................. 35
À propos des formats de sortie vidéo HDMI..................... 36
Mise à niveau logicielle ................................... 37
Mise à niveau du logiciel................................................... 37
Guide de dépannage ........................................ 38
Alimentation ...................................................................... 38
Opérations de base............................................................. 38
Lecture de disque............................................................... 38
Image ................................................................................. 39
Son ..................................................................................... 39
Réseau................................................................................ 39
Messages d’erreur à l’écran............................................... 40
Glossaire ........................................................... 41
Caractéristiques techniques ........................... 43
Généralités ......................................................................... 43
Performances audio............................................................ 43
Entrée/Sortie ...................................................................... 43
Droits d’auteur ................................................................... 43
Index .................................................................. 45
(à la fin de ce mode d’emploi)
À propos de ce manuel
Ce mode d’emploi décrit l’utilisation du lecteur via
sa télécommande sauf pour les fonctions non prises
en charge. Certaines de ces fonctions sont aussi
accessibles via les boutons du panneau avant.
Les remarques contiennent des informations
relatives à la sécurité et des instructions
complémentaires d’utilisation. Les Astuces
fournissent des conseils d’utilisation.
Ce mode d’emploi a été imprimé avant la
production. La conception et les spécifications du
produit sont susceptibles d’être modifiées en vue
d’améliorations du produit. En cas de différences
entre le mode d’emploi et le produit, ce dernier fait
foi.
Icônes utilisées dans ce manuel
Des icônes sont utilisées pour désigner les boutons/
fonctions disponibles pour un format particulier. Pour en
savoir plus sur les types et formats de disques
compatibles, reportez-vous à la page 3.
BD-Vidéo
: DVD-Vidéo, DVD-VR, DVD+VR
: Audio CD, Super Audio CD
: fichiers vidéo
: fichiers audio
: fichiers photo
Table des matières
1. Introduction
2. Raccordements
3. Playback
4. Paramètres
5. Informations complémentaires
Information about third party software licenses...i
Des mises à jour du logiciel intégrant de nouvelles
fonctions ou apportant des améliorations au produit
seront proposées régulièrement. Nous vous conseillons
de mettre régulièrement à niveau le logiciel de ce
lecteur. Pour en savoir plus, reportez-vous à la section
« Mise à niveau logicielle » (p. 37).
BD
DVD
CD
VIDEO
MUSIC
PHOTO
2 Fr
INTRODUCTION
Grande variété de disques et formats de fichiers compatibles
Blu-ray Disc™, DVD, SA-CD et CD (p. 23)
Blu-ray 3D™ (p. 11), BONUSVIEW™ et BD-Live™ (p. 25)
Fichiers vidéo, musique et image sur disques DVD-R/RW, CD-R/RW et dispositifs de stockage USB (p. 19)
Fonctionnalités réseau améliorées
Partage de contenus sur serveur DLNA (PC ou NAS) (p. 19)
Visionnage en streaming de contenus sur services de réseau (p. 21)
Commander ce lecteur avec des dispositifs mobiles (AV CONTROLLER) via réseau (p. 22)
Visionner les photos et vidéos d’un smartphone sur un téléviseur (Miracast™) (p. 22)
Simplicité d’installation et d’utilisation
Configuration initiale à la fois simple et rapide (p. 18)
Configuration sans fil automatique avec la fonction WPS (Wi-Fi Protected Setup) (p. 18)
Mise à niveau logicielle via réseau ou USB (p. 37)
Pilotage du téléviseur, ampli-tuner AV et de ce lecteur (HDMI Control) (p. 30)
Assurez-vous que le produit a été livré avec tous les accessoires suivants.
Possibilités offertes par ce lecteur
Accessoires fournis
5#%&
5#%&
Contenus sur clé
USB
Réseau sans fil (WPS
pris en charge)
Divers disques
Contenus sur Smartphone
(Miracast)
Streaming de contenus
sur réseau
Contenus PC/NAS
(DLNA)
Piles (×2)
(AAA, R03, UM-4)
Télécommande Cordon d’alimentation
3 Fr
Introduction
1
Français
Types de disques/fichiers
utilisables avec ce lecteur
Ce lecteur accepte les disques de 12 cm et de 8 cm.
Aucun adaptateur 8 cm-12 cm n’est nécessaire.
Utilisez des disques conformes aux standards
compatibles indiqués par les logos officiels présents
sur l’étiquette du disque. La lecture de disques non
conformes à ces standards n’est pas garantie. En
outre, le fait de pouvoir lire ces disques ne garantit ni
la qualité d’image ni la qualité du son.
* Ce lecteur est compatible avec une clé USB formatée
aux formats FAT 16/32 et NTFS.
*1 Fréquence d’échantillonnage entre 32 et 48 kHz
(stéréo) et débit binaire entre 8 et 320 kbps
*2 Fréquence d’échantillonnage entre 32 et 48 kHz
(stéréo) et débit binaire entre 32 et 192 kbps
*3 Fréquence d’échantillonnage jusqu’à 192 kHz/24 bits
(LPCM/stéréo)
*4 WMV9 (résolution maximum : 1920 x 1080)
La lecture d’un fichier figurant dans le tableau ci-
dessus n’est pas garantie selon les méthodes de
création de fichier ou les codecs utilisés.
La lecture de l’ensemble des fichiers contenus sur le
disque, le périphérique mémoire USB et le réseau
n’est pas garantie.
Il n’est pas possible de lire un fichier dont les droits
d’auteur sont protégés.
Lorsque le DLNA est utilisé, le fichier doit répondre
aux exigences du serveur DLNA.
Information sur la gestion des régions
pour les disques Blu-ray/DVD vidéo.
Les lecteurs et disques Blu-ray/DVD vidéo
comportent des codes régionaux qui déterminent la
région dans laquelle un disque pourra être lu.
Vérifiez la mention du code de région sur le panneau
arrière de ce lecteur.
Dans le cas d’un disque Blu-ray, le disque peut être
lu sur ce lecteur s’il porte la même mention de code
de région ou la mention du code de région « ABC ».
Dans le cas d’un disque DVD, le disque peut être lu
sur ce lecteur s’il porte la même mention de code de
région ou la mention du code de région « ALL ».
À propos des disques et des fichiers
Type de disque Format d’enregistrement
BD-ROM/BD-R/
BD-RE
Disques BD-Video/fichiers de données
DVD-ROM DVD-Video
DVD-R/DVD-R
DL/DVD-RW
Disques DVD-Video/DVD-VR/AVCHD/
fichiers de données
DVD+R/DVD+R
DL/DVD+RW
Disques DVD-Video/DVD+VR/AVCHD/
fichiers de données
CD-ROM CDDA/HDCD
CD-R/CD-RW CDDA/fichiers de données
SA-CD SA-CD
USB* Fichiers de données
DLNA Fichiers de données
Formats de
fichiers audio
compatibles
Formats de
fichiers vidéo
compatibles
Formats de
fichiers image
compatibles
MP3 (.mp3)
*1
WMA (.wma)
*2
AAC (.aac/.m4a)
WAV (.wav)
*3
FLAC (.flac)
*3
ALAC (.m4a)
*3
DivX (.divx)
MKV avec format
DivX (.mkv)
MKV avec H.264
(.mkv)
MPEG PS (.mpeg/
.mpg)
MPEG TS (.ts)
MPEG-4 (.mp4)
VOB (.vob)
AVI (.avi)
ASF (.asf)
WMV (.wmv)
*4
JPEG (.jpeg/.jpg)
GIF (.gif)
PNG (.png)
MUSIC
PHOTO
Remarques
Information sur la gestion des régions
Destination BD-Video DVD-Video
États-Unis et Canada Code de région « A »
ou « ABC »
Numéro de région
«1» ou «AL
Europe Code de région « B »
ou « ABC »
Numéro de région
«2» ou «AL
Asie, Taïwan et
Corée
Code de région « A »
ou « ABC »
Numéro de région
«3» ou «AL
Amérique centrale et
Amérique du Sud
Code de région « A »
ou « ABC »
Numéro de région
«4» ou «AL
1
ALL
2
ALL
3
ALL
4
ALL
4 Fr
À propos des disques et des fichiers
Les opérations et fonctions des disques Blu-ray/
DVD vidéo peuvent différer des explications
données dans ce mode d’emploi et certaines
opérations peuvent être interdites en raison de
réglages effectués par le fabricant du disque.
Si un écran de menu ou des instructions de
fonctionnement s’affichent pendant la lecture d’un
disque, suivez les indications affichées.
Certains disques peuvent ne pas être lus.
N’oubliez pas de finaliser tous les supports
d’enregistrement que vous avez l’intention de lire
sur ce lecteur.
La « finalisation » désigne un traitement effectué
durant l’enregistrement d’un disque, de sorte que ce
disque puisse être lu à la fois sur ce lecteur et sur
d’autres lecteurs/enregistreurs. Seuls les disques
finalisés peuvent être lus sur ce lecteur. (Ce lecteur
ne possède pas de fonction pour finaliser les
disques.)
À propos des disques Super Audio CD
(SA-CD)
Format audio basé sur la norme CD actuelle mais qui
inclut davantage d’informations permettant de
restituer un son de meilleure qualité. Il existe trois
types de disques : les disques simple couche, double
couche ou hybrides. Le disque hybride peut être lu
sur les lecteurs CD existants ainsi que sur les
lecteurs Super Audio CD car il contient à la fois des
informations CD audio standard et des informations
Super Audio CD.
Cet appareil n’affiche pas les données texte incluses
dans les disques sur l’écran du panneau avant.
Chargement d’un disque
Insérez le disque avec la face imprimée vers le haut.
Dans le cas d’un disque enregistré des deux côtés,
tournez la face à lire vers le bas.
La lecture peut commencer automatiquement en
fonction du disque et du réglage choisi pour ce
lecteur.
Avec certains disques, il est possible que le menu soit
affiché en premier.
La durée de chargement du disque peut varier selon
le disque.
Australie Code de région « B »
ou « ABC »
Numéro de région
« 4 » ou « ALL »
Russie Code de région « C »
ou « ABC »
Numéro de région
« 5 » ou « ALL »
Remarques
Information sur la gestion des régions
Destination BD-Video DVD-Video
4
ALL
5
ALL
Remarque
Remarques
1
2
3
Type de disque Super Audio CD
Disque
monocouche
Couche HD
Disque double
couche
Disque hybride
Couche HD
Couche CD
Couche HD
Disque Super Audio CD hybride
Couche CD lisible par tout
lecteur de CD
- DSD stéréo haute qualité
- DSD multicanal haute qualité
Couche Haute Densité contenant :
5 Fr
À propos des disques et des fichiers
Introduction
1
Français
Précautions d’emploi pour les
disques
Attention aux rayures et à la
poussière
Les disques Blu-ray, DVD et CD sont sensibles à la
poussière, aux traces de doigts et particulièrement aux
rayures. Un disque rayé risque de ne pas pouvoir être
lu sur ce lecteur. Manipulez les disques avec soin et
rangez-les en lieu sûr.
Rangement correct des disques
Précautions de manipulation
Nettoyage de la lentille du capteur
optique
N’utilisez jamais de disque de nettoyage en vente
dans le commerce. L’utilisation de ces disques peut
endommager la lentille.
Confiez le nettoyage de la lentille au SAV agréé par
Yamaha le plus proche.
Précautions concernant le
visionnage d’images vidéo 3D
Il se pourrait que certaines personnes éprouvent une
gêne ou un malaise (fatigue visuelle, épuisement ou
nausée) lors du visionnage de supports vidéo 3D.
Nous recommandons à tous les utilisateurs de faire
une pause à intervalles réguliers lors du visionnage
de supports vidéo 3D.
En cas de gêne ou malaise quelconque, arrêtez le
visionnage du support vidéo 3D et attendez que la
gêne ou le malaise soit passé. En cas de malaise
sérieux, consultez un médecin.
Lisez attentivement les modes d’emploi (disque
Blu-ray et téléviseur) et/ou les consignes de sécurité
affichées sur le téléviseur.
La vue est toujours en cours de développement chez
les enfants en bas âge (plus particulièrement en
dessous de six ans). Veuillez consulter un médecin
(pédiatre ou oculiste) avant de laisser des enfants en
bas âge regarder des supports vidéo 3D.
Les jeunes enfants doivent toujours être sous la
surveillance d’un adulte pour s’assurer que les
consignes ci-dessus sont appliquées.
Technologie Cinavia
La technologie Cinavia fait partie du système de
protection du contenu dans votre lecteur Blu-ray.
Votre lecteur Blu-ray peut afficher les messages
suivants, s’arrêter ou couper provisoirement le son
des sorties audio si vous lisez une copie non autorisée
d’un contenu protégé par la technologie Cinavia.
Ces messages sont affichés en anglais uniquement.
À propos de la technologie Cinavia
Ce produit utilise la technologie Cinavia afin de limiter
l’utilisation de copies non autorisées de certains films et de
certaines vidéos produits à des fins commerciales et de
leurs bandes son originales. Lorsqu’une utilisation interdite
d’une copie non autorisée est détectée, un message sera
affiché et la lecture ou la copie sera interrompue.
Des informations complémentaires concernant la
technologie Cinavia peuvent être obtenues auprès du
centre Cinavia d’information des consommateurs en ligne
à l’adresse suivante
http://www.cinavia.com
. Pour obtenir par courrier des
informations complémentaires concernant Cinavia,
envoyez un courrier mentionnant votre adresse postale à :
Cinavia Consumer Information Center, P.O. Box 86851,
San Diego, CA, 92138, États-Unis.
Posez le disque au centre de son boîtier et
rangez le boîtier et le disque en position
verticale.
Évitez de ranger les disques dans des
endroits exposés aux rayons directs du
soleil, à proximité d’appareils de
chauffage ou dans des endroits très
humides.
Ne faites pas tomber les disques et ne les
soumettez pas à de fortes vibrations ni à
des chocs violents.
Évitez de ranger les disques dans des
endroits très poussiéreux ou très humides.
Si la surface du disque est encrassée,
essuyez-la délicatement avec un chiffon
doux et humide (à l’eau uniquement).
Lorsque vous essuyez un disque,
déplacez toujours le chiffon du centre
vers le bord.
N’utilisez pas de nettoyants en atomiseur
contenant du benzène, du diluant, des
liquides de protection contre l’électricité
statique ou tout autre solvant.
Ne touchez pas la surface du disque.
Ne collez pas de papier ou des étiquettes adhésives
sur les disques.
Si la surface de lecture d’un disque est encrassée ou
rayée, le lecteur peut en déduire que le disque est
incompatible et éjecter le plateau de disque ou bien
le disque risque de ne pas être lu correctement.
Essuyez la saleté sur la surface de lecture avec un
chiffon doux.
Remarque
Arrêt de la lecture. Le contenu que vous
visionnez est protégé par Cinavia® et sa
lecture sur cet appareil n’est pas autorisée.
Pour de plus amples informations, consultez le site
http://www.cinavia.com.
Code message 1.
Arrêt provisoire du son. N’ajustez pas le
volume. Le contenu que vous visionnez est
protégé par Cinavia® et sa lecture sur cet
appareil n’est pas autorisée.
Pour de plus amples informations, consultez le site
http://www.cinavia.com.
Code message 3.
6 Fr
Panneau avant
1 p (Mise sous tension/Mise en veille)
Permet d’allumer ce lecteur ou de le mettre en veille.
Maintenez le bouton p du panneau avant enfoncé
pendant 5 secondes au moins pour réinitialiser le
lecteur (réinitialisation du système).
2 Connecteur USB (p. 16)
3 Indicateur SA-CD
S’allume lorsqu’un SA-CD est inséré et que la couche
SA-CD (p. 4) est sélectionnée.
4 Afficheur du panneau avant
Affiche différentes informations relatives au
fonctionnement de l’appareil.
5 Plateau de disque
6 (Éjection)
Ouvre/referme le plateau de disque.
7 (Recherche arrière/Saut arrière)
Exercer une simple pression pour un saut arrière ou
maintenir enfoncé pour une recherche vers l’arrière.
8 (Recherche arrière/Saut arrière)
Exercer une simple pression pour un saut avant ou
maintenir enfoncé pour une recherche vers l’avant.
9 (Lecture)
Lance la lecture.
0 (Pause)
Effectue une pause.
A (Arrêt)
Interrompt la lecture.
Retirez le film de protection du panneau avant du lecteur avant d’utiliser l’appareil.
Commandes et fonctions
USB
5#%&
2 5 61 43 7 8 9 0 A
Remarque
7 Fr
Commandes et fonctions
Introduction
1
Français
Panneau arrière
1 AUDIO OUT (L/R) (p. 13)
2 HDMI (p. 11)
3 DIGITAL OUT (COAXIAL/OPTICAL) (p. 13)
4 USB (p. 16)
5 NETWORK (p. 14)
6 REMOTE CONTROL (OUT/IN) (p. 17)
7 AC IN (p. 17)
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT
NETWORK
USB
HDMI
REMOTE CONTROL
OUT IN
AC IN
1 6 72 3 45
8 Fr
Commandes et fonctions
Télécommande
apparaît dans le coin supérieur gauche de l’écran
si la fonction correspondant à la touche n’est pas
disponible.
1 Émetteur de signaux infrarouges : Envoie des
signaux infrarouges. Dirigez l’émetteur de la
télécommande vers le capteur de l’appareil de
destination (p. 10).
2 p :
Permet d’allumer ce lecteur ou de le mettre en veille.
3 : Ouvre/referme le plateau de disque.
4 Touches de couleur : Servez-vous de ces
touches conformément aux instructions à l’écran.
ZOOM : Effectue un zoom
avant/arrière. Chaque nouvelle pression sur la touche
grossit ou réduit progressivement la vue à l’écran
(jusqu’à 3 incréments dans chaque sens).
PROGRAM :
Permet de définir l’ordre de
lecture (p. 25). Vous pouvez établir une liste comportant
jusqu’à 15 plages (dans le cas d’un disque audio) ou 15
titres/chapitres (dans le cas d’un DVD vidéo).
SHUFFLE :
Sélectionne le mode de lecture aléatoire (p. 23).
REPEAT
: Permet de changer de mode de répétition.
Appuyez plusieurs fois de suite sur cette touche pour
faire votre choix parmi les différents modes proposés.
: Répète le titre en cours de lecture.
: Répète le chapitre en cours de lecture.
: Répète le dossier en cours de lecture.
:
Répète l’intégralité des plages/fichiers du disque.
: Répète la plage ou le fichier en cours de lecture.
5 Touches numériques : Permettent de saisir des
nombres ou de passer directement, en cours de lecture,
à la plage ou au chapitre correspondant au numéro
saisi. Ces touches risquent de ne pas être disponibles
selon le type de disque et les conditions de lecture.
6 CLEAR : Efface le numéro saisi ou l’entrée définie.
7 PIP : Active/désactive la fonction d’incrustation
(image dans l’image) (p. 26). Marque PIP ( )
apparaît sur l’écran lorsque cette fonction est
disponible. Vous pouvez également sélectionner cette
fonction à partir du menu à l’écran (p. 23).
Marque PIP s’affiche à condition d’avoir activé la
fonction Marque PIP (p. 31).
8 MIRACAST : Active Miracast (p. 22).
Remarque
PROGRAM SHUFFLE REPEAT
REPEAT A/B
ZOOM
AUDIO
SUBTITTLE
ANGLE
SEARCH
MIRACAST
CLEAR
PIP
HOME
2ND
AUDIO
ENTER
TOP MENU
RETURN ON SCREEN
POP-UP MENU
SETUP
STATUSSETUP
RED
GREEN BLUE
YELLOW
L
N
J
K
H
E
M
I
0
7
6
5
D
4
3
8
A
9
C
B
E
F
2
1
G
Remarque
BD
DVD
VIDEO PHOTO
DVD
CD
DVD
CD
VIDEO
MUSIC PHOTO
BD
DVD
CD
PHOTO
BD
9 Fr
Commandes et fonctions
Introduction
1
Français
9 2ND AUDIO :
Active les données audio
secondaires pour les incrustations (image dans l’image)
(p. 26) ou les commentaires audio. Deuxième Marque
Audio ( ) apparaît sur l’écran lorsque cette fonction est
disponible (p. 34). Vous pouvez également sélectionner
cette fonction à partir du menu à l’écran (p. 23).
Deuxième Marque Audio s’affiche à condition d’avoir
activé la fonction Deuxième Marque Audio (p. 31).
0 HOME :
Permet d’afficher l’écran de menu HOME (p. 19).
A TOP MENU :
Affiche l’écran du menu
principal si le disque contient un menu. Sélectionnez
l’option voulue à l’aide des touches
5
/
a
/
2
/
3
et
ENTER
.
Étant donné que certaines opérations varient en
fonction du disque, conformez-vous aux instructions
affichées dans chaque écran de menu.
B Touches de curseur (5/a/2/3) : Déplacent la
sélection (entrée en surbrillance) sur l’écran de menu.
ENTER : Sélectionne le menu ou la fonction en
surbrillance.
C RETURN : Permet de revenir au menu ou à l’écran
précédent, etc.
D Touches de contrôle
: Interrompt la lecture.
: Effectue une pause.
: Lance la lecture.
/ : Effectue un saut arrière/avant.
/
:
Effectue une recherche arrière/avant. Chaque nouvelle
pression sur la touche fait varier progressivement la
vitesse de recherche (jusqu’à 5 incréments dans
chaque sens). Appuyez sur pour reprendre la
lecture dans des conditions normales.
: Change la vitesse du diaporama (plus lent/
plus rapide : 3 incréments).
/
:
Appuyez sur cette touche pour la recherche/la
relecture instantanée. La fonction de recherche
instantanée effectue un saut du contenu de 30
secondes. La relecture instantanée permet de revenir
10 secondes en arrière.
E SETUP : Affiche l’écran de menu SETUP (p. 27).
F STATUS : Affiche diverses informations au sujet du
mode de lecture (p. 24).
G REPEAT A/B :
Permet de lire un morceau ou une scène que vous
souhaitez répéter.
1 Appuyez sur REPEAT A/B à l’endroit où vous
souhaitez commencer la lecture. « A- » apparaît à
l’écran.
2 Appuyez à nouveau sur REPEAT A/B à l’endroit
où vous souhaitez terminer la lecture. « A-B »
apparaît à l’écran. La lecture en boucle commence.
3 Pour annuler la lecture en boucle, appuyez sur
REPEAT A/B. « A-B » disparaît de l’écran pour
indiquer que la lecture en boucle est terminée.
Les conditions d’exécution de cette fonction sont
liées aux spécifications du disque.
H SUBTITLE : Permet de
changer la langue des sous-titres (p. 42) lorsque cela
est possible. Vous pouvez également sélectionner cette
fonction à partir du menu à l’écran (p. 23).
I AN
G
LE : Permet de changer l’angle de
vue de la caméra si la vidéo est enregistrée sous
plusieurs angles de prise de vue. Marque Angle ( )
apparaît sur l’écran lorsque cette fonction est
disponible. Vous pouvez également sélectionner cette
fonction à partir du menu à l’écran (p. 23).
Marque Angle s’affiche à condition d’avoir activé la
fonction Marque Angle (p. 31).
J AUDIO : Permet de changer la langue de
diffusion ou le format audio. Vous pouvez également
sélectionner cette fonction à partir du menu à l’écran
(p. 23).
K SEARCH :
Permet de passer directement à un point indiqué
pendant la lecture. Pour en savoir plus sur cette
fonction, reportez-vous à la section « Utilisation de la
fonction de recherche » (p. 25). Vous pouvez
également sélectionner cette fonction à partir du menu
d’état (p. 24).
L YouTube : Active YouTube (p. 21).
M POP-UP/MENU : Affiche un menu
contextuel. Le contenu du menu varie en fonction du
disque. Pour en savoir plus sur l’accès au menu
contextuel et sur son fonctionnement, consultez les
instructions du disque.
Selon le DVD, vous pouvez afficher l’écran du menu
principal en appuyant sur POP-UP/MENU.
N ON SCREEN : Affiche le menu à l’écran (p. 23).
Remarque
Remarque
BD
BD
DVD
BD
DVD
CD
VIDEO MUSIC PHOTO
BD
DVD
CD
VIDEO MUSIC
PHOTO
BD
DVD
CD
VIDEO MUSIC
Remarque
Remarque
BD
DVD
CD
BD DVD
BD DVD
BD
DVD
BD
DVD
CD
BD
DVD
10 Fr
Commandes et fonctions
Insertion des piles dans la
télécommande
Changer les deux piles lorsque la portée de la
télécommande diminue.
Utilisez des piles AAA, R03, UM-4.
Assurez-vous que les polarités sont correctes.
Reportez-vous à l’illustration figurant à l’intérieur
du compartiment des piles.
Retirez les piles si vous n’avez pas l’intention d’utiliser
la télécommande pendant une période prolongée.
N’utilisez pas des piles usagées associées à des piles
neuves.
N’associez pas différents types de piles (telles que
des piles alcaline et des piles au manganèse). Lisez
attentivement les instructions figurant sur
l’emballage, ces différents types de piles pouvant
avoir la même forme et la même couleur.
Si les piles ont fuit, mettez-les immédiatement au
rebut. Évitez de toucher les matières qui ont fuit ou
de les laisser entrer en contact avec les vêtements,
etc. Nettoyez soigneusement le compartiment des
piles avant d’y insérer de nouvelles piles.
Ne jetez pas les piles avec les ordures ménagères :
mettez-les au rebut conformément aux
réglementations nationales en vigueur.
Conservez les piles hors de portée des enfants. Si
une pile est avalée par accident, contactez
immédiatement votre médecin.
Retirez les piles lorsque vous prévoyez de ne pas
utiliser la télécommande pendant une longue période.
Ne rechargez pas ou ne désassemblez pas les piles
fournies.
Portée approximative de la
télécommande
Fonction ID
Si vous utilisez plusieurs appareils Yamaha, il se pourrait
que la télécommande de ce lecteur pilote d’autres
appareils, ou qu’une autre télécommande pilote ce lecteur.
Dans ce cas, changez l’ID de la télécommande pour éviter
toute interférence avec d’autres appareils. Si vous avez
changé l’ID de la télécommande n’oubliez pas de
sélectionner le même ID pour l’appareil principal.
Le réglage par défaut est ID1.
1 Réglage de la télécommande
Pour changer l’ID d’ID1 à ID2, maintenez le bouton
rouge et la touche numérique 2 enfoncés en même
temps pendant 7 secondes. Pour changer l’ID d’ID2
à ID1, maintenez le bouton rouge et la touche
numérique 1 enfoncés en même temps pendant 7
secondes.
2 Réglage de l’appareil principal
Maintenez les boutons et
sur le panneau avant enfoncés en même temps
pendant 2 secondes pour afficher l’ID actuel
lorsque :
Aucun disque n’est inséré dans le lecteur.
Le plateau de disque est fermé.
La lecture est arrêtée.
« NO DISC » s’affiche sur le panneau avant.
Continuez à maintenir les touches enfoncées
pendant encore 2 secondes pour changer l’ID de
ID1 à ID2 et vice versa.
Lorsque la télécommande ne contient aucune pile
pendant quelques minutes, ou si des piles déchargées
restent dans la télécommande, l’ID de la
télécommande passe automatiquement sur ID1. Si
vous souhaitez utiliser la télécommande en
configuration ID2, insérez des piles neuves et
définissez de nouveau l’ID de la télécommande.
Lorsque le lecteur est réinitialisé, l’ID de sa
télécommande sera ID1.
Remarques
1
3
22
USB
SA-CD
30°30°
Capteur de télécommande
6 mètres
Remarques
11 Fr
Raccordements
2
Français
RACCORDEMENTS
Raccordez les câbles vidéo/audio appropriés en fonction des appareils utilisés.
Reportez-vous à la page 35 pour en savoir plus sur les formats de sortie audio/vidéo disponibles.
Procurez-vous les câbles appropriés nécessaires au raccordement de vos appareils. Le type et le nombre de ces
câbles peuvent varier en fonction des appareils utilisés.
Lecture vidéo/audio via un téléviseur et ampli-tuner AV
Reportez-vous à la section « Raccordement à un téléviseur via un ampli-tuner AV » (p. 12).
Lecture vidéo/audio via un téléviseur utilisé seul
Reportez-vous à la section « Raccordement direct à un téléviseur » (p. 12).
Lecture vidéo/audio via un téléviseur et un dispositif audio
Reportez-vous à la section « Raccordement à un téléviseur et à un dispositif audio » (p. 13).
À propos de la connexion HDMI
Pour bénéficier d’une image de haute qualité et du son
numérique via la borne HDMI, procurez-vous dans le
commerce des câbles HIGH SPEED HDMI portant le
logo HDMI (comme sur le panneau arrière du lecteur).
Pour en savoir plus sur la fonction Contrôle HDMI,
reportez-vous à « Contrôle HDMI » (p. 30).
Pour changer le mode de sortie de la borne HDMI,
utilisez le paramètre « HDMI » (p. 34) sous
Paramètres audio.
Raccordement pour la lecture de
disques Blu-ray 3D
Pour pouvoir lire des disques Blu-ray 3D sur ce lecteur, il
est impératif que votre système remplisse les conditions
suivantes.
Votre téléviseur et ampli-tuner AV (le cas échéant)
doivent prendre en charge la fonction 3D.
Sortie 3D sous Paramètres vidéo (p. 32) est réglé sur
« Auto ».
Raccordements vidéo/audio
Astuces
USB
5#%&
Ce lecteur
Ampli-tuner AV
TV
Vidéo (HDMI)Vidéo/audio
(HDMI)
Haut-parleurs
Audio
USB
5#%&
Ce lecteur
TV
Vidéo/audio
(HDMI)
USB
5#%&
Ce lecteur
TV
Vidéo (HDMI)
Audio
(connexion coaxiale,
optique ou analogique)
Dispositif audio
(comme une barre sonore)
Astuces
12 Fr
Raccordements vidéo/audio
Raccordement à un téléviseur via
un ampli-tuner AV
Raccordez ce lecteur à l’ampli-tuner AV et le téléviseur à
l’ampli-tuner AV à l’aide de câbles HDMI.
Pour en savoir plus sur le raccordement des haut-parleurs,
reportez-vous au mode d’emploi fourni avec votre ampli-
tuner AV et vos haut-parleurs.
Attention !
Ne branchez pas ce lecteur sur une prise
secteur tant que vous n’avez pas effectué
tous les raccordements nécessaires.
Raccordement direct à un
téléviseur
Raccordez ce lecteur au téléviseur à l’aide d’un câble
HDMI.
Attention !
Ne branchez pas ce lecteur sur une prise
secteur tant que vous n’avez pas effectué
tous les raccordements nécessaires.
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT
NETWORK
USB
HDMI
HDMI IN
HDMI OUT
HDMI IN
HDMI
Ce lecteur
Ampli-tuner AV
TV
Borne HDMI
Haut-parleurs
Câble HDMI
Entrée HDMI
Câble HDMI
Sortie HDMI
Entrée HDMI
Raccordement
des haut-parleurs
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT
NETWORK
USB
HDMI
HDMI
HDMI IN
Ce lecteur
TV
Borne HDMI
Câble HDMI
Entrée HDMI
13 Fr
Raccordements vidéo/audio
Raccordements
2
Français
Raccordement à un téléviseur et à un dispositif audio
Raccordez ce lecteur au téléviseur à l’aide d’un câble HDMI et raccordez le dispositif audio au lecteur avec un câble
audio (numérique optique, numérique coaxial ou câble à fiche stéréo).
Attention !
Ne branchez pas ce lecteur sur une prise secteur tant que vous n’avez pas effectué tous
les raccordements nécessaires.
Pour changer le mode de sortie des bornes COAXIAL/OPTICAL, utilisez le paramètre « Coaxial / Optique »
(p. 34) sous Paramètres audio.
Si le son de la source est reproduit à la fois par les haut-parleurs du téléviseur et le dispositif audio, réglez HDMI
sur « Non » sous Paramètres audio pour désactiver la sortie son vers le téléviseur.
Le signal audio des disques SACD ne peut pas être transmis à la borne COAXIAL ni OPTICAL (p. 35).
Astuces
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT
NETWORK
USB
HDMI
HDMI
HDMI IN
COAXIAL
OPTICAL
AUDIO OUT
COAXIAL OPTICALAUDIO
Ce lecteur
TV
Bornes OPTICAL, COAXIAL ou
AUDIO OUT L/R
Câble audio
(numérique optique, numérique
coaxial ou câble à fiche stéréo).
Entrée audio
(numérique optique, numérique
coaxiale ou analogique stéréo)
Dispositif audio
(comme une barre sonore)
Entrée HDMI
Câble HDMI
Sortie HDMI
14 Fr
Le raccordement de ce lecteur à un réseau (sans fil ou filaire) permet d’utiliser les fonctions suivantes.
Lecture de contenus sur serveur DLNA (PC ou NAS) (p. 19)
Lecture de divers contenus sur services de réseau (p. 21)
Lecture de disques compatibles BD-Live (p. 25)
Pilotage du lecteur avec des dispositifs mobiles (AV CONTROLLER) (p. 22)
L’utilisation des services de réseau ou de la fonctionnalité BD-Live requiert une connexion internet à haut débit.
Reportez-vous au mode d’emploi de votre équipement, car la méthode de connexion et l’appareil raccordé
peuvent différer selon votre environnement réseau.
Utilisez un câble réseau/routeur compatible 10BASE-T/100BASE-TX.
Si vous utilisez un routeur compatible DHCP, vous ne devez régler aucun paramètre réseau pour ce lecteur. En
effet, tous les réglages réseau (comme par exemple l’adresse IP) lui sont assignés automatiquement. Vous ne
devez donc configurer le réseau que si le routeur n’est pas compatible DHCP ou que vous voulez effectuer
manuellement les réglages réseau (p. 32).
Raccordement sans fil
La fonction Wi-Fi de ce lecteur permet de le raccorder
sans fil à votre réseau (routeur). Pour utiliser la fonction
Wi-Fi, reportez-vous à la section « Configuration de
connexion sans fil » (p. 18) et effectuez les réglages
appropriés.
Raccordement filaire
Raccordez ce lecteur à votre réseau (routeur) avec un
câble réseau blindé à paires torsadées disponible dans le
commerce.
Raccordement réseau
Remarques
Astuce
USB
5#%&
Ce lecteur
Internet Modem Routeur PC
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT
NETWORK
USB
HDMI
REMOTE
C
OUT
LAN
NETWORK
Ce lecteur
Internet Modem Routeur PC
Borne
NETWORK
Câble réseau
Borne LAN
15 Fr
Raccordement réseau
Raccordements
2
Français
Configuration du serveur DLNA
La fonction DLNA permet de partager des contenus multimédia (comme des vidéos, de la musique et des photos) stockés
sur un serveur DLNA (PC ou NAS) connecté à votre réseau et de visionner/écouter ces contenus via ce lecteur.
En outre, vous pouvez utiliser un dispositif mobile (comme un smartphone ou une tablette) pour commander sans fil ce
lecteur via le réseau.
Pour utiliser les fonctions DLNA, effectuez les raccordements réseau (p. 14) puis la configuration du serveur DLNA
décrite ci-dessous.
Pour que les fonctions DLNA soient disponibles, il est impératif que tous les dispositifs soient raccordés au même
réseau.
Un NAS ne peut être utilisé comme serveur DLNA que s’il est compatible DLNA.
Réglage de partage de médias sur le
serveur DLNA
Pour pouvoir lire des contenus multimédia stockés sur votre
serveur DLNA (PC ou NAS), vous devez au préalable
régler le paramètre de partage de média du logiciel de
serveur DLNA installé sur le serveur DLNA en question.
Pour en savoir plus sur le paramétrage du serveur
DLNA ou les formats de fichiers compatibles avec le
serveur DLNA, reportez-vous aux modes d’emploi
de votre serveur DLNA et de son logiciel.
1 Mettez votre serveur DLNA (PC ou NAS) et ce lecteur
sous tension.
2 Si vous utilisez un PC comme serveur DLNA, vérifiez
que le logiciel de serveur DLNA (comme par exemple
Windows Media Player 12) est installé sur l’ordinateur.
3 Sur votre serveur DLNA, activez le partage de médias
et autorisez leur partage avec ce lecteur.
La configuration du serveur DLNA est terminée. Pour
lire les contenus sur serveur DLNA avec ce lecteur,
choisissez le serveur DLNA et un fichier multimédia
sous le menu HOME (p. 19).
Utiliser un dispositif mobile comme
contrôleur média
Si vous possédez un dispositif mobile (comme un
smartphone ou une tablette) prenant en charge la fonction
Digital Media Controller (DMC), vous pouvez l’utiliser
pour commander ce lecteur via le réseau.
Pour pouvoir commander ce lecteur avec un
dispositif mobile, réglez Contrôle DMC (p. 32) sous
le menu SETUP sur Permettre (réglage par défaut).
Pour vérifier si votre dispositif mobile prend en
charge la fonction DMC, reportez-vous aux modes
d’emploi de votre dispositif mobile et de son
logiciel.
Remarques
USB
5#%&
DLNA
Ce lecteur
Serveur DLNA
(PC ou NAS)
Télécommande Contrôleur
(dispositif mobile)
Astuce
Astuces
16 Fr
Le raccordement d’une clé USB au port USB en face avant ou arrière de ce lecteur permet de lire les fichiers multimédia
contenus sur la clé en question (p. 19).
Yamaha ne saurait garantir que ce lecteur fonctionne avec toutes les marques de clés USB.
Raccordez une clé USB à l’un des ports USB (en face avant/arrière) de ce lecteur pour utiliser la fonction BD-Live
(p. 26).
Raccordement USB
Remarques
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT
NETWORK
USB
HDMI
USB
USB
USB
Ce lecteur
Port USB (avant)
Ce lecteur
Clé USB
Port USB (arrière)
Clé USB
17 Fr
Raccordements
2
Français
Raccordement aux connecteurs
REMOTE CONTROL
Vous pouvez transmettre et recevoir les signaux de
commande à distance grâce aux connecteurs
REMOTE CONTROL (OUT/IN).
Reliez fermement les extrémités des câbles mono
avec fiches minijack de 3,5 mm (en vente dans le
commerce) aux connecteurs REMOTE CONTROL
(OUT/IN) appropriés.
Si votre ampli-tuner AV est un produit Yamaha et
peut transmettre des signaux de commande SCENE
via son connecteur REMOTE OUT, vous pouvez
commander le lecteur à l’aide de la fonction SCENE.
Attention !
Ne branchez pas ce lecteur sur une prise
secteur tant que vous n’avez pas effectué
tous les raccordements nécessaires.
Pour en savoir plus sur la fonction SCENE, reportez-
vous au mode d’emploi fourni avec votre ampli-
tuner AV Yamaha.
Vous avez la possibilité de relier un appareil
Yamaha (tel qu’un lecteur CD) disposant de la
fonction SCENE au connecteur REMOTE
CONTROL (OUT) de ce lecteur.
Raccordement du cordon
d’alimentation
Après avoir effectué tous les raccordements
nécessaires, branchez une extrémité du cordon
d’alimentation fourni au connecteurAC IN à l’arrière
du lecteur. Branchez ensuite l’autre extrémité du
cordon à une prise secteur
Autres raccordements
NETWORK
USB
REMOTE CONTROL
OUT IN
REMOTE CONTROL IN
REMOTE CONTROL OUT
Ce lecteur
Vers le connecteur
REMOTE
CONTROL (IN)
Câble mono avec fiches
minijack de 3,5 mm
Vers le connecteur
REMOTE
CONTROL OUT
Appareil Yamaha
Vers le connecteur
REMOTE
CONTROL IN
Câble mono avec
fiches minijack de
3,5 mm
Récepteur de signaux
infrarouges ou appareil
Yamaha (ampli-tuner AV,
par exemple)
Vers le connecteur
REMOTE
CONTROL (OUT)
Astuces
AC IN
Vers la prise secteur
18 Fr
PLAYBACK
Configuration via Installation Facile
La fonction Installation Facile permet de définir facilement
la langue, la résolution et le format d’image. L’écran
Installation facile s’affiche lors de la première mise sous
tension de ce lecteur effectuée juste après l’achat de votre
appareil. Vous pouvez procéder aux mêmes réglages à
partir du menu SETUP
=
Système
=
Installation facile.
1 Dès que l’écran Installation facile apparaît, appuyez
sur ENTER pour préconfigurer votre lecteur avec
Installation facile.
2 Définissez la langue, la résolution et le format d’écran
en suivant les instructions affichées à l’écran.
Si aucune image n’apparaît sur le téléviseur à l’issue
de la procédure Installation facile, reportez-vous à la
section « Guide de dépannage » (p. 39).
Un avertissement concernant la lecture de supports
vidéo 3D apparaît à la mise sous tension de ce
lecteur. Appuyez sur ENTER pour faire disparaître
le message ou sur CLEAR pour éviter qu’il s’affiche
à nouveau (p. 30).
Configuration de connexion sans fil
Pour connecter ce lecteur à votre réseau (routeur) sans fil,
configurez les paramètres de connexion sans fil en
effectuant la procédure ci-dessous.
Si votre routeur (point d’accès) prend en charge la
fonction WPS (Wi-Fi Protected Setup), vous pouvez
effectuer automatiquement ces réglages et connecter le
lecteur au routeur sans devoir saisir manuellement les
paramètres de réseau (comme par exemple SSID).
1 Appuyez sur la touche SETUP pour afficher l’écran du
menu SETUP.
2 Sélectionnez Réglages Généraux = Réseau =
Configuration de Connexion = Sans Fil.
3 Appuyez sur 2/3 pour choisir Oui, puis appuyez sur
ENTER.
4 Appuyez sur 2/3 pour choisir une des méthodes de
configuration suivantes, puis appuyez sur ENTER.
Recherche : Sélectionnez cette option pour rechercher
les réseaux sans fil disponibles. Quand la liste des réseaux
s’affiche, sélectionnez le SSID pour la connexion et
saisissez le mot de passe.
Manuel : Sélectionnez cette option pour saisir
manuellement les paramètres du réseau (comme par
exemple SSID).
Auto :
Sélectionnez cette option pour utiliser la fonction
WPS. Sélectionnez la méthode PBC (Push Button
Configuration, ou configuration via pression des touches) ou
la méthode code PIN, puis suivez les instructions à l’écran.
Pour en savoir plus sur le réglage et l’utilisation de
votre routeur (point d’accès), reportez-vous à son
mode d’emploi.
Si la fonction WPS n’est pas opérationnelle,
sélectionnez « Recherche » ou « Manuel » pour
paramétrer la connexion sans fil.
Les appareils utilisant une bande de fréquence de 2,4
GHz, tels qu’un four à micro-ondes, un appareil
numérique sans fil ou Bluetooth, sont susceptibles
d’interrompre la communication sans fil. Éloignez le
lecteur de ces appareils ou mettez-les hors tension.
Les performances de connexion à un réseau sans fil
dépendent de l’environnement du réseau (type de
routeur, distance entre le routeur et ce lecteur,
emplacement d’installation, etc.). Si vous remarquez
des coupures du son ou de l’image durant la lecture,
rapprochez le lecteur du routeur, changez la position
du lecteur ou réorientez l’antenne du routeur.
Réglages initiaux
Remarques
Remarques
19 Fr
Playback
3
Français
Le menu HOME permet d’accéder aux fonctions de base suivantes de ce lecteur.
Recherche et lecture des fichiers multimédia sur divers disques, clés USB et serveurs DLNA (PC ou NAS)
Accès à divers services de réseau (p. 21)
Affichage du menu SETUP (p. 27)
Pour en savoir plus sur les types et formats de disques compatibles, reportez-vous à la page 3.
Pour lire les contenus de serveurs DLNA avec ce lecteur, vous devez au préalable configurer le paramètre de
partage de média (p. 15) sur le serveur DLNA.
Lecture de photo/musique/vidéo
Opérations de base
2/3/5/a : Déplace la sélection.
2 : Revient au dossier parent.
HOME : Accède à l’écran du menu HOME ou quitte cet
écran.
ENTER : Confirme le dossier/fichier choisi.
Procédure de lecture des fichiers
dans un dossier donné
Exemple : Sélection d’un fichier vidéo sur une clé USB
Arrêtez la lecture de la vidéo avant d’accéder à
l’écran du menu HOME.
1 Appuyez sur la touche HOME pour afficher l’écran du
menu HOME.
2 Appuyez sur la touche 5/a pour sélectionner la source
du fichier que vous avez l’intention de lire, puis
appuyez sur ENTER.
Si votre serveur DLNA ne figure pas dans la liste,
vérifiez qu’il est sous tension et sélectionnez DLNA
Search pour mettre à jour la liste de serveurs.
3 Sélectionnez le dossier Photo, Musique, Vidéo ou
AVCHD à lire, puis appuyez sur ENTER.
Pour revenir au dossier parent, appuyez sur RETURN
ou sélectionnez .
Menu HOME
Astuces
Remarque
MIRACAST
PIP
HOME
2ND
AUDIO
ENTER
TOP MENU
RETURN ON SCREEN
POP-UP MENU
SETUP
Remarque
Suite à la page suivante. \
20 Fr
Menu HOME
Seul le type de fichier choisi au cours de cette étape
sera présenté à l’étape suivante. Si vous
sélectionnez, par exemple, le dossier Photo, vous
verrez uniquement des fichiers image par la suite.
4 Sélectionnez le dossier contenant le fichier à lire.
5 Sélectionnez le fichier à lire, puis appuyez sur
ENTER.
Si le fichier sélectionné est un fichier vidéo, la lecture
commence immédiatement.
S’il s’agit d’un fichier de musique, la lecture
commence après l’affichage d’un écran d’état.
S’il s’agit d’un fichier image, le diaporama commence
immédiatement.
Pour présenter un diaporama avec un fond sonore,
commencez par écouter la musique qui vous
intéresse, puis appuyez sur HOME pour revenir à
l’écran de menu HOME et sélectionnez le fichier
image.
Selon le contenu du fichier affiché, vous risquez de
ne pas pouvoir lancer la lecture.
Opérations de visualisation des
photos
Lorsque vous visionnez des photos, les boutons de la
télécommande fonctionnent de la façon suivante.
: Arrête le diaporama et revient à l’explorateur de
fichiers.
: Effectue une pause au cours du diaporama.
: Lance la lecture du diaporama.
: Passe à la photo suivante.
: Passe à la photo précédente.
: Accélère la vitesse de défilement du diaporama (3
incréments).
: Ralentit la vitesse de défilement du diaporama (3
incréments).
5: Inverse une photo.
a: Crée une copie miroir d’une photo.
2: Fait pivoter une photo dans le sens contraire des
aiguilles d’une montre.
3: Fait pivoter une photo dans le sens des aiguilles d’une
montre.
ZOOM : Effectue un zoom avant/arrière (jusqu’à 3
incréments dans chaque sens).
5/a/2/3 : Effectue un panoramique en mode de
zoom lorsque la taille de la photo est supérieure aux
dimensions de l’écran.
Remarque
Astuce
Remarque
21 Fr
Playback
3
Français
Les services de réseau suivants vous permettent de visionner des contenus multimédia (comme des photos et des vidéos).
Dropbox
Albums photo en ligne Picasa
YouTube
L’accès aux contenus proposés par des tiers nécessite une connexion internet haut débit et peut en outre requérir un
compte utilisateur ainsi qu’un abonnement payant.
Les contenus offerts par ces services tiers peuvent être modifiés, interrompus ou suspendus à tout moment et cela
sans avis préalable ; Yamaha décline toute responsabilité liée à de tels changements.
Certains contenus pourraient être disponibles uniquement dans certains pays et dans certaines langues.
Yamaha ne garantit pas que ces services de contenus resteront offerts ou disponibles pour une durée définie, et
toute garantie de ce type, explicite ou implicite, est exclue.
1 Appuyez sur la touche HOME pour afficher l’écran du
menu HOME.
Pour afficher directement l’écran du menu YouTube,
appuyez sur YouTube.
2 Appuyez sur 5/a pour sélectionner les services de
réseau, puis appuyez sur ENTER.
3 Appuyez sur 2/3/5/a pour sélectionner le service de
réseau voulu, puis appuyez sur ENTER.
4 Appuyez sur 2/3/5/a pour sélectionner une option,
puis confirmez votre choix (ou lancez le lecture) en
appuyant sur ENTER.
Pour quitter chaque service de réseau, appuyez sur
HOME.
La suite de la procédure après l’étape 4 varie selon le
contenu des menus proposés par chaque service.
À propos de Dropbox™
Dropbox est un service de réseau qui vous permet de
conserver vos fichiers dans votre Dropbox, sorte de
fourre-tout en ligne, et d’y accéder depuis tout ordinateur,
smartphone ou tablette. Ajoutez automatiquement des
photos et visionnez vos vidéos depuis tout endroit.
Pour de plus amples informations, rendez-vous sur
www.dropbox.com.
À propos des albums photo en
ligne Picasa™
Les albums photo en ligne Picasa constituent un service de
réseau qui permet à ses utilisateurs de partager des photos
avec leurs familles et connaissances, et de rechercher des
photos dans le domaine public.
Pour de plus amples informations, rendez-vous sur
picasaweb.google.com.
À propos de YouTube™
YouTube est un service de réseau qui permet à ses
utilisateurs de rechercher, visionner et partager sur
Internet des vidéos créées par les utilisateurs.
Pour de plus amples informations, rendez-vous sur
www.youtube.com.
Utilisation des services réseau
Remarques
Astuce
Astuce
Remarque
Dropbox est une marque de Dropbox Inc.
Picasa et le logo Picasa sont des marques commerciales de
Google. Inc.
YouTube et le logo YouTube sont des marques
commerciales de Google. Inc.
22 Fr
Miracast permet de visionner des vidéos sur divers appareils, sans câble ni connexion à un réseau, via un point d’accès
(Wi-Fi Direct). Cela vous permet par exemple de visionner les photos d’un dispositif compatible Miracast (smartphone,
etc.) sur un téléviseur raccordé à ce lecteur.
Pour vérifier si votre dispositif est compatible Miracast, reportez-vous au mode d’emploi fourni avec l’appareil en
question.
Quand la fonction Miracast est activée sur ce lecteur, les autres fonctions réseau (comme DLNA) ne sont pas
disponibles.
1 Appuyez sur MIRACAST.
2 Dans les 60 secondes qui suivent, activez Miracast sur
votre smartphone et sélectionnez ce lecteur comme
dispositif à raccorder.
Pour en savoir plus sur l’utilisation de votre
smartphone, reportez-vous à son mode d’emploi.
3 Pour quitter Miracast, appuyez sur MIRACAST.
Vous pouvez aussi quitter Miracast en appuyant sur
HOME ou RETURN.
Installée sur un dispositif mobile, l’application « AV CONTROLLER » permet d’utiliser le dispositif en question pour
commander ce lecteur.
Cette application permet de commander les fonctions de base des lecteurs Blu-ray Disc™ de Yamaha, comme par
exemple les fonctions de lecture, pause, saut, mise sous/hors tension et de navigation à l’écran.
L’application « AV CONTROLLER » est disponible dans de nombreuses langues.
Pour plus de détails sur « AV CONTROLLER », rendez-vous sur le site Internet de Yamaha.
Visionner les photos et vidéos d’un smartphone
sur un téléviseur (Miracast™)
Remarques
USB
5#%&
Dispositif compatible
Miracast
(smartphone, etc.)
Ce lecteur
TV
Astuce
Selon votre configuration, vous pourriez remarquer des coupures du son/de l’image ou des parasites sur l’écran du
téléviseur. Dans ce cas, essayez une des suggestions suivantes.
Rapprochez le dispositif Miracast de ce lecteur.
Mettez hors tension les autres dispositifs sans fil inutilisés.
Éloignez le dispositif Miracast et ce lecteur de fours micro-ondes, dispositifs Bluetooth et d’autres appareils
sans fil.
Commander ce lecteur avec des dispositifs mobiles
(AV CONTROLLER)
AV CONTROLLER
23 Fr
Playback
3
Français
Ce chapitre traite de la lecture des disques Blu-ray, DVD,
SA-CD, CD vendus dans le commerce et des disques
DVD-RW/R enregistrés.
Les opérations de lecture de base sont décrites à la
page 8.
Menu à l’écran
Pour afficher ce menu, appuyez sur la touche ON
SCREEN. Il suffit ensuite d’appuyer sur 5/a/2/3 pour
passer d’une option à l’autre, puis d’appuyer sur ENTER
pour agir sur la fonction en question.
Le menu à l’écran contient les options suivantes.
Titre : Indique le numéro du titre en
cours de lecture. Il suffit de sélectionner le titre qui vous
intéresse pour y accéder directement.
Chapitre : Indique le numéro du
chapitre en cours de lecture. Il suffit de sélectionner le
chapitre qui vous intéresse pour y accéder directement.
Plage/Fichier :
Indique le numéro de la plage ou du fichier en cours de
lecture. Il suffit de sélectionner la plage ou le fichier qui
vous intéresse pour y accéder directement.
Heure : Affiche la
durée de lecture. Sélectionnez le type d’information qui
vous intéresse :
Durée de lecture écoulée de la plage ou du titre/
chapitre/disque/fichier
Durée de lecture restante de la plage ou du titre/
chapitre/disque/fichier
Mode/Modèle de lecture
: Indique le
mode de lecture actuel. Vous avez le choix entre trois
modes de lecture :
Normal : Lecture normale.
Aléatoire : Lecture aléatoire sans répétition.
Random : Lecture aléatoire avec répétition.
Normal
Lecture Aléatoire CH (chapitre)
Lecture Aléatoire TT (titre)
Lecture Aléatoire
Aléatoire CH (chapitre)
Aléatoire TT (titre)
Aléatoire Totalité
Normal
Lecture Aléatoire F (dossier)
Lecture Aléatoire F (dossier)
Audio : Indique la langue ou le
signal de diffusion audio du disque Blu-ray/DVD
actuellement sélectionné. Vous pouvez sélectionner le
type de son de votre choix.
Angle :
Indique le numéro de l’angle de vue
actuellement sélectionné. Si la vidéo est enregistrée sous
plusieurs angles de prise de vue, vous êtes libre d’en changer.
Sous-titres : Indique la langue des
sous-titres actuellement sélectionnée le cas échéant.
Style de Sous-titres :
Indique le style des sous-
titres actuellement sélectionné. Cette fonction concerne
uniquement les sous-titres externes de fichiers vidéo.
Choisissez le style de texte des sous-titres qui vous intéresse.
Bitrate : Indique le
débit binaire du signal audio/vidéo.
Deuxième Vidéo : Active/désactive la fonction
d’incrustation PIP (image dans limage) (p. 8).
Deuxième Audio : Active/désactive les données
audio secondaires (p. 9).
Recherche instantanée
: Effectue un saut de
30 secondes.
Relecture instantanée
: Permet de revenir
10 secondes en arrière dans la vidéo.
Sélection CC
: Permet de choisir le style des
sous-titres pour malentendants.
Diaporama :
Indique la vitesse du diaporama. Vous avez le choix entre
trois vitesses différentes, de la plus lente à la plus rapide :
Ralenti/Moyen/Rapide.
Transitions : Indique la façon dont les photos
sont présentées à l’écran. Vous pouvez changer le type de
transition selon l’effet voulu.
Code Page : Sélectionne le code de caractère
du sous-titre ajouté à la vidéo DivX (p. 41).
Mode de lecture avancé
Remarque
BD
DVD
BD
DVD
CD
PHOTO
BD
DVD
CD
DVD
CD
PHOTO
CD
DVD
VIDEO MUSIC PHOTO
BD DVD
BD
DVD
BD
DVD
VIDEO
BD
BD DVD CD VIDEO MUSIC
BD
BD
BD
DVD
CD VIDEO
BD DVD CD VIDEO MUSIC
BD DVD
PHOTO
PHOTO
VIDEO
24 Fr
Mode de lecture avancé
État, menu
Ce menu propose différents réglages, tels que les sous-
titres, l’angle de vue ou le numéro du titre, du chapitre, ou
de la plage en cours de lecture. Pour afficher le menu
d’état, appuyez sur la touche STATUS. Ce menu contient
les sous-menus suivants.
Exemple : Icônes affichées lors de la lecture d’un disque
Blu-ray
1 (Lecture en cours)
2 (Icône du type de disque/fichier vidéo)
3 (Numéro du titre en cours de lecture) : Vous
pouvez passer directement au titre voulu à l’aide de la
touche SEARCH (p. 9).
4 (Numéro du chapitre en cours de lecture) :
Vous pouvez passer directement au chapitre voulu à
l’aide de la touche SEARCH (p. 9).
5 (Durée de lecture écoulée) : Vous pouvez
passer directement au moment voulu à l’aide de la
touche SEARCH (p. 9).
6
(Mode de répétition) :
Affiche le mode de répétition
actuel (p. 8).
7 (Son actuellement sélectionné) : Vous pouvez
changer la langue de diffusion ou le format audio à
l’aide de la touche AUDIO.
8 (Sous-titre actuellement sélectionné) : Vous
pouvez changer la langue des sous-titres à l’aide de la
touche SUBTITLE.
Exemple : Icônes affichées lors de la lecture d’un fichier
de musique
1 (Lecture en cours)
2
(Mode de répétition) :
Affiche le mode de répétition
actuel (p. 8).
3 (Icône du type de disque/fichier de
musique)
4 (Illustration) : Affiche une des images du
fichier, si le fichier en contient.
5 (Numéro de la plage ou du fichier en cours
de lecture) : Vous pouvez passer directement à la
plage voulue à l’aide de la touche SEARCH (p. 9).
6 (Informations) : Affiche des informations
relatives à la musique, si le fichier en contient.
7 (Durée de lecture écoulée) : Vous pouvez
passer directement au moment voulu à l’aide de la
touche SEARCH (p. 9).
8 (Barre de progression) : Affiche le
niveau de progression de la chanson en cours.
1 (Lecture en cours)
2 (Icône du fichier image)
3 (Numéro du fichier en cours d’affichage)
4
(Mode de répétition) :
Affiche le mode de répétition
actuel (p. 8).
5 (Vitesse du diaporama)
BD
DVD
VIDEO
1 2 3 4 5
6 7 8
DVD
CD
MUSIC
MUSIC
PHOTO
1 2 3 4 5
25 Fr
Mode de lecture avancé
Playback
3
Français
Programmation de l’ordre de
lecture
Il est possible de programmer l’ordre de lecture des plages
d’un disque audio ou des chapitres d’un DVD.
Appuyez sur PROGRAM en cours de lecture pour
afficher la fenêtre PROGRAMME.
Vous avez la possibilité de programmer un maximum de
15 plages/chapitres.
Exemple : Programmation de l’ordre de lecture des
plages d’un CD
1 Appuyez sur PROGRAM en cours de lecture.
2 Appuyez sur ENTER pour programmer l’ordre de
lecture.
Dans le cas d’un disque audio, appuyez sur 5/a pour
sélectionner chacune des plages dans l’ordre où vous
souhaitez les lire, puis appuyez sur ENTER.
Dans le cas d’un disque DVD vidéo, sélectionnez des
titres (représentés par les lettres TT) et des chapitres
(représentés par les lettres CH) au lieu des plages.
Pour retirer une plage de la liste programmée,
sélectionnez la plage, puis appuyez sur CLEAR.
Pour annuler la lecture du programme, appuyez sur
RETURN.
3 Une fois la programmation terminée, appuyez sur
pour valider et commencer la lecture du programme.
4 Pour annuler la lecture d’un programme, appuyez sur
.
Utilisation de la fonction de
recherche
Cette fonction permet d’accéder directement à un point
précis du support en cours de lecture.
1 Appuyez sur SEARCH en cours de lecture. Cela a
pour effet d’afficher la barre d’état.
2 Appuyez sur 5/a/2/3 pour sélectionner une des
entrées suivantes, puis appuyez sur ENTER.
:
Numéro du titre (symbolisé par )
Numéro du chapitre (symbolisé par )
Durée du titre écoulée (symbolisée par )
Durée du chapitre écoulée (symbolisée par )
:
Numéro de la plage (symbolisé par )
Durée de la plage écoulée (symbolisée par )
Durée du disque écoulée (symbolisée par )
:
Numéro du fichier (symbolisé par )
Durée du fichier écoulée (symbolisée par )
:
Numéro du fichier (symbolisé par )
3 Appuyez sur 5/a ou sur les touches numériques pour
choisir/ajuster la valeur de l’entrée en surbrillance, puis
appuyez sur ENTER pour accéder au point
correspondant.
4 Pour fermer la barre d’état, appuyez sur STATUS.
Utilisation des fonctions
BONUSVIEW™ et BD-Live™
Ce lecteur prend en charge les fonctions de lecture
BONUSVIEW (p. 41) (BD-ROM Profil 1 Version 1.1) et
BD-Live (p. 41) (BD-ROM Profil 2).
Les fonctions et la méthode de lecture varient en
fonction du disque. Pour en savoir plus, reportez-
vous aux instructions figurant sur le disque ou sur le
mode d’emploi fourni.
DVD
CD
Remarque
BD
DVD
CD
MUSIC
PHOTO
BD DVD
CD
VIDEO MUSIC
PHOTO
26 Fr
Mode de lecture avancé
Utilisation de la fonction
d’incrustation
(lecture audio/vidéo secondaire)
Si vous disposez d’un disque BD vidéo contenant des
données audio et vidéo secondaires compatibles avec la
fonction d’incrustation (image dans limage), vous avez la
possibilité de lire ces données dans un coin de l’écran en
même temps que le contenu principal.
Lorsque le symbole PIP ( ) ou
Deuxième Marque Audio ( ) est
affiché, appuyez sur PIP pour activer/
désactiver la fonction d’incrustation
(image dans l’image).
Pour écouter les données audio secondaires,
n’oubliez pas de régler le paramètre Sortie audio
(Coaxial / Optique ou HDMI) sur PCM ou Reencode
(p. 34).
Sur certains disques, il peut être nécessaire d’activer
également les données audio secondaires dans le
menu principal du disque (p. 9).
Le son et l’image secondaires en incrustation
peuvent être lus et supprimés automatiquement en
fonction du contenu. Les zones affichables peuvent
également être limitées.
Utilisation de la fonction BD-
Live™
1. Définissez les paramètres de
configuration du réseau (p. 31).
2. Connectez la clé USB à ce lecteur
(p. 16).
Les données BD-Live sont sauvegardées sur la clé
USB connectée à ce lecteur. Pour bénéficier de ces
fonctions et utiliser la clé USB comme dispositif
Espace de stockage externe, raccordez une clé USB
de format USB 2.0 « High Speed » (480 Mbit/sec.) à
l’un des ports USB (avant/arrière) de ce lecteur.
Local Storage fait office de mémoire auxiliaire
pendant la lecture d’un disque Blu-ray.
Utilisez une clé USB disposant d’au moins 2Go
d’espace libre.
Un dossier BUDA est créé automatiquement sur la
clé USB, si besoin est.
Si l’espace de stockage est insuffisant, les données
ne seront pas copiées/téléchargées. Dans ce cas,
supprimez les données inutiles ou utilisez une
nouvelle clé USB.
Le chargement des données peut prendre un certain
temps (lecture/écriture).
Yamaha ne saurait garantir que ce lecteur fonctionne
avec toutes les marques de clés USB.
N’utilisez pas de rallonge USB pour raccorder une
clé USB au port USB du lecteur. L’utilisation d’une
rallonge USB peut entraîner un dysfonctionnement
du lecteur.
3. Lancez la lecture du disque.
4. Exécutez BD-Live conformément
aux instructions du disque.
Ne retirez pas la clé USB et ne débranchez pas le
cordon d’alimentation pendant que la fonction BD-
Live est active.
En ce qui concerne la méthode de lecture de
contenus BD-Live, etc., suivez les consignes
fournies dans la notice du disque Blu-ray.
Pour tirer parti des fonctions BD-Live, effectuez la
connexion au réseau (p. 14) et définissez les
paramètres de réseau (p. 31).
Reportez-vous à la section « Connexion BD-Live »
(p. 32) si vous souhaitez restreindre l’accès aux
contenus BD-Live.
Le temps nécessaire pour télécharger les programmes
en ligne sur la clé USB connectée à ce lecteur varie
selon la vitesse de votre connexion Internet et le
volume des données de ces programmes.
Les programmes BD-Live fournis via Internet ne
pourront peut-être pas afficher la connexion en
fonction du statut du fournisseur (mise à jour). Dans
de tels cas, retirez le disque et essayez à nouveau.
Si l’écran BD-Live n’apparaît pas après la sélection
de la fonction BD-Live dans le menu du disque
Blu-ray, il se peut que l’espace disponible sur la clé
USB ne soit pas suffisant. Dans ce cas, éjectez le
disque du lecteur et effacez des données sur la clé
USB à l’aide du menu « Formater » dans « Espace
de stockage externe » (p. 30).
Remarques
Image principale Image secondaire
Remarques
Remarques
27 Fr
Paramètres
4
Français
PARAMÈTRES
Le menu SETUP offre différents réglages audio/vidéo des fonctions au moyen de la télécommande.
Menu SETUP
Menu/sous-menu Paramètre Description Page
Réglages
Généraux
Système Veille Automatique Permet d’activer/désactiver la fonction d’économie d’énergie. 30
Contrôle HDMI Configure le lecteur afin de recevoir le signal de commande en
provenance de la télécommande de votre téléviseur/ampli-tuner AV.
30
Insérer les paramètres
par défaut
Rétablit tous les paramètres par défaut à l’exception du paramètre
Security.
30
Mettre à niveau Lance la mise à niveau du lecteur. 30
Information de Mise
à jour
Permet d’activer/désactiver l’affichage de notifications à l’écran quand
le lecteur détecte une mise à jour du logiciel disponible en ligne.
30
3D Message de la
Réécoute
Affiche un avertissement concernant la lecture de supports vidéo 3D à
la mise sous tension de ce lecteur.
30
Espace de stockage
externe
Affiche l’espace libre sur la clé USB raccordée à ce lecteur ou
formate le dossier « BUDA » de la clé USB.
30
Installation facile Permet de définir la langue, la résolution et le format d’image. 30
Langue Affichage à l’écran Permet de choisir la langue des menus ou messages affichés à l’écran. 30
Menu Permet de choisir la langue préférée pour le menu du disque. 30
Audio Permet de choisir la langue préférée pour les données audio. 30
Sous-titres Permet de choisir la langue préférée pour les sous-titres. 31
Lecture Lecture automatique
du disque
Configure le lecteur afin de démarrer automatiquement la lecture du
disque.
31
Marque Angle Permet d’afficher le symbole d’angle de vue (Marque Angle) lors de
la lecture de disques Blu-ray Disc/DVD contenant des scènes prises
sous plusieurs angles.
31
Marque PIP Permet d’afficher le symbole de la fonction d’incrustation (Marque
PIP) lors de la lecture de disques Blu-ray Disc/DVD permettant
l’affichage d’image dans l’image.
31
Deuxième Marque
Audio
Permet d’afficher le symbole de données audio secondaires
(Deuxième Marque Audio) lors de la lecture de disques Blu-ray Disc/
DVD contenant ce type de données.
31
Dernière Mémoire Permet de mémoriser le dernier emplacement de lecture d’un disque
Blu-ray ou DVD quand l’appareil passe en veille ou que vous ouvrez
le plateau.
31
DivX(R) VOD DRM Permet d’afficher le code d’enregistrement des films au format
DivX(R).
31
Sous-titres DivX®
Permet d’activer l’affichage de sous-titres pour les films au format DivX(R)
31
Sécurité Modification du mot
de passe
Permet de changer le mot de passe pour les paramètres Contrôle
Parental et Code pays.
31
Contrôle Parental Permet de régler le paramètre Contrôle Parental en fonction du
contenu du disque.
31
Code pays Permet de définir votre Code pays. 31
Réseau Configuration de
Connexion
Permet de définir une méthode de connexion au réseau.
31
Information Permet d’afficher un écran d’informations au sujet du réseau. 31
Test de connexion Permet d’effectuer un test de connexion au réseau. 32
Configuration IP Permet de régler le paramètre IP sur Auto/Manuel. 32
Paramètres Proxy Permet de configurer le paramètre proxy. 32
Pilotage réseau Permet de régler le paramètre de commande des appareils connectés
via Ethernet sur Oui/Non.
32
Veille Réseau Définit si ce lecteur peut être mis sous tension depuis d’autres
dispositifs du réseau.
32
Contrôle DMC Définit si ce lecteur peut être commandé via un contrôleur de supports
numérique (fonction Digital Media Controller ou DMC) compatible
DLNA (p. 15).
32
Connexion BD-Live Permet de régler la connexion BD-Live sur Autorisé/Partiellement
autorisé/Interdit.
32
28 Fr
Menu SETUP
Paramètres
vidéo
TV Sortie 3D Permet de choisir le mode vidéo 3D ou 2D. 32
Écran TV Permet de régler le format d’écran du téléviseur raccordé ainsi que la
sortie vidéo.
32
Résolution HDMI Permet de choisir la résolution de sortie vidéo HDMI. 33
Système TV Permet de choisir NTSC/PAL/Multi pour le Système TV. 33
Espace de couleur Permet de choisir YCbCr 4:4:4/YCbCr 4:2:2/Full RGB/RGB pour
l’Espace de couleur.
33
HDMI Deep Color Permet de choisir 30 bits/36 bits/48 bits/Non pour HDMI Deep Color. 33
HDMI 1080p 24Hz Permet de régler HDMI 1080p 24Hz sur Auto/Non. 33
Processus
Vidéo
Réduction de bruit Permet de régler le niveau de réduction de bruit. 33
Désentrelacement
vidéo
Permet de régler la manière de détecter le signal vidéo.
33
Sous-titres
pour
malentendants
Attributs ST Permet de régler le style des sous-titres pour malentendants. 33
Couleur de police
Taille de police
Style de police
Opacité de police
Netteté de police
Couleur Arrête
Police
Couleur arrière-plan
Opacité arrière-plan
Couleur de fenêtre
Opacité de fenêtre
Permet de personnaliser la police, le fond et la fenêtre utilisés pour les
sous-titres pour malentendants quand Attributs ST est réglé sur
Personnalisé.
33
Paramètres
audio
Sortie audio Coaxial / Optique Permet de choisir le mode de sortie du connecteur COAXIAL/de la
borne OPTICAL entre Bitstream/PCM/Reencode/Non.
34
HDMI Permet de choisir le mode de sortie de la borne HDMI entre
Bitstream/PCM/Reencode/Non.
34
Échantillonnage
Inférieur
Permet de choisir la fréquence de sous-échantillonnage du signal
audio numérique entre 48K/96K/192K.
34
DRC Permet d’activer/désactiver la fonction DRC (Dynamic Range
Compression).
34
Sortie SACD Priorité SACD Sélectionne la priorité de lecture pour des contenus bicanal ou
multicanal, lorsque le disque contient les deux types de contenus.
34
Couche SACD/CD Sélectionne la couche à lire pour la lecture d’un disque hybride SA-
CD/CD.
34
Configuration
Haut-Parleur
Mixage en 2 canaux
stéréo
Permet de configurer la sortie audio des connecteurs AUDIO OUT L/R.
34
Post process UpMix Reproduit en multicanal le signal audio 2 canaux. 34
Système
d’information
Permet d’afficher la version logicielle et l’adresse MAC (p. 42).
34
Menu/sous-menu Paramètre Description Page
29 Fr
Menu SETUP
Paramètres
4
Français
Exemple d’utilisation du menu
SETUP
Les réglages du lecteur se font à partir de l’écran du menu
SETUP. Vous trouverez ci-dessous des explications sur
les opérations de base du menu SETUP.
Exemple : Réglage de Lecture automatique du disque
Certaines fonctions ne peuvent pas être réglées en
cours de lecture. Pour pouvoir les configurer,
appuyez sur le bouton afin d’arrêter
complètement la lecture.
1. Affichez l’écran du menu SETUP.
Appuyez sur la touche SETUP pour afficher l’écran
du menu SETUP.
Appuyez sur 2/3 pour sélectionner Réglages
Généraux, puis appuyez sur ENTER ou a.
2. Sélectionnez un sous-menu.
Appuyez sur 5/a pour sélectionner Lecture, puis
appuyez sur ENTER ou 3.
3. Sélectionnez une option de menu.
Appuyez sur
5
/
a
pour sélectionner Lecture
automatique du disque, puis appuyez sur
ENTER
ou
3
.
4. Sélectionnez l’option voulue.
Appuyez sur 5/a pour sélectionner Oui ou Non,
puis appuyez sur ENTER.
Pour certaines options de menu, vous devez saisir
des numéros (pour un mot de passe, par exemple)
avec les touches numériques.
5. Quittez l’écran du menu.
Appuyez sur 2 pour revenir au menu précédent.
Remarque
REPEAT A/B
AUDIO
SUBTITTLE
ANGLE
SEARCH
MIRACAST
CLEAR
PIP
HOME
2ND
AUDIO
ENTER
TOP MENU
RETURN ON SCREEN
POP-UP MENU
SETUP
STATUSSETUP
Astuce
30 Fr
Menu SETUP
Réglages Généraux
Les réglages par défaut sont signalés par «
*
».
Système
Veille Automatique
Permet d’activer/désactiver la fonction d’économie d’énergie.
En cas d’activation, le lecteur affiche l’économiseur
d’écran au bout de 5 minutes d’inactivité. Puis passe en
mode de veille si aucune opération n’a lieu dans les 15
minutes qui suivent.
Oui
*
, Non
Contrôle HDMI
Vous pouvez configurer le lecteur de façon à ce qu’il
reçoive un signal de commande d’un téléviseur/ampli-
tuner AV compatible avec la fonction Contrôle HDMI via
un câble HDMI (p. 11).
Oui, Non
*
Insérer les paramètres par défaut
Vous avez la possibilité de rétablir tous les paramètres par
défaut du lecteur à l’exception du paramètre Sécurité
(p. 31). Pour en savoir plus au sujet des paramètres par
défaut, reportez-vous aux pages 27–34.
Mettre à niveau
Ce paramètre permet de procéder à une mise à niveau
manuelle du logiciel à partir de Avec une clé USB ou
Réseau. Pour en savoir plus à ce sujet, reportez-vous à la
section « Mise à niveau logicielle » (p. 37).
Information de Mise à jour
Permet d’activer/désactiver l’affichage de notifications à
l’écran quand le lecteur détecte une mise à jour du logiciel
disponible en ligne.
Oui
*
, Non
3D Message de la Réécoute
Permet d’activer et de désactiver l’affichage sur le
téléviseur d’un avertissement concernant la lecture de
supports vidéo 3D à la mise sous tension de ce lecteur.
Oui
*
, Non
Espace de stockage externe
Vous pouvez vérifier l’espace libre sur la clé USB
raccordée à ce lecteur ou formater (vider) le dossier
« BUDA » de cette clé USB en sélectionnant Format.
Pour bénéficier de la fonction BD-Live (p. 26), vous
devez raccorder une clé USB (offrant au moins 2Go
d’espace libre) à l’un des ports USB (avant/arrière)
de ce lecteur. Cela vous permet d’utiliser la clé USB
comme espace de stockage externe.
Installation facile
Ce paramètre permet d’exécuter une Installation facile
(p. 18).
Langue
Affichage à l’écran
Vous avez la possibilité de sélectionner la langue des
messages ou menus affichés à l’écran (menu SETUP, par
exemple).
English, Français, Español, Deutsch, Italiano, Svenska,
Nederlandse, Polski, Русский, 中文
Menu
Ce paramètre permet de choisir votre langue de
prédilection pour le menu du disque.
English, Français, 中文 , Español, Deutsch, Italiano,
Nederlandse, Portugais, Danois, Svenska, Finnois,
Norvégien, Polski, Русский, Coréen, Japonais, Plus
Audio
Ce paramètre permet de choisir votre langue de
prédilection pour la lecture des disques Blu-ray Disc/
DVD. Pour plus de détails à ce sujet, reportez-vous à la
section « Menu » (p. 30).
Utilisation de la fonction Contrôle HDMI
La fonction Contrôle HDMI permet de piloter ce lecteur de
façon interactive via votre téléviseur (à condition que ce
dernier soit compatible avec la fonction Contrôle HDMI).
Vous devez raccorder ce lecteur à un téléviseur
(compatible avec la fonction Contrôle HDMI) au moyen
d’un câble HDMI et activer le paramètre Contrôle
HDMI dans le menu SETUP (p. 30) pour profiter des
fonctions décrites ci-dessous.
Fonction de sélection d’entrée automatique
Lorsque vous lancez la lecture sur ce lecteur, le
sélecteur d’entrée du téléviseur (et de l’ampli-tuner
AV si le lecteur est raccordé au téléviseur via un
ampli-tuner AV) commute automatiquement sur ce
lecteur. Le téléviseur peut également s’allumer
automatiquement selon le modèle de téléviseur utilisé.
Fonction d’extinction automatique
Si vous éteignez le téléviseur alors que le lecteur est à
l’arrêt et que l’écran du menu SETUP n’est pas affiché,
le lecteur est automatiquement mis hors tension.
La fonction Contrôle HDMI risque de ne pas
fonctionner correctement avec certains téléviseurs.
Il est possible que vous ayez accès à des fonctions
différentes de celles décrites ci-dessus selon le
modèle de téléviseur ou d’ampli-tuner AV utilisé.
Pour bénéficier des avantages de la fonction
Contrôle HDMI, réglez le paramètre de la fonction
Contrôle HDMI sur TOUS les appareils (ce
lecteur, le téléviseur et l’ampli-tuner AV).
Certaines opérations supplémentaires peuvent être
requises.
Chaque fonction peut être réglée indépendamment afin
d’être activée/désactivée selon le téléviseur utilisé.
Pour en savoir plus sur la configuration, consultez
les modes d’emploi fournis avec le téléviseur et/ou
l’ampli-tuner AV.
Si le paramètre est réglé sur Oui, la consommation
d’énergie en mode veille augmente en raison de
l’utilisation de la fonction Contrôle HDMI.
Remarques
Astuce
31 Fr
Menu SETUP
Paramètres
4
Français
Sous-titres
Ce paramètre permet de choisir votre langue de
prédilection pour les sous-titres.
English, Français, 中文 , Español, Deutsch, Italiano,
Nederlandse, Portugais, Danois, Svenska, Finnois,
Norvégien, Polski, Русский, Coréen, Japonais, Plus, Non
(Les réglages par défaut du paramètre [Langue] diffèrent
selon le modèle du lecteur.)
Lecture
Lecture automatique du disque
Ce paramètre permet d’activer ou de désactiver la fonction
Lecture automatique du disque. En cas d’activation, la
lecture du disque commence automatiquement dès que
vous chargez le disque dans le lecteur.
Oui
*
, Non
Marque Angle
Permet d’afficher la Marque Angle ( ) lors de la
lecture de disques Blu-ray Disc/DVD contenant des
scènes prises sous plusieurs angles.
Oui
*
, Non
Marque PIP
Ce paramètre permet d’afficher le symbole d’image dans
l’image Marque PIP ( ) lors de la lecture d’un disque
Blu-ray offrant la possibilité d’incruster une image dans
un coin de l’image principale (p. 26).
Oui
*
, Non
Deuxième Marque Audio
Ce paramètre d’afficher le symbole de données audio
secondaires Deuxième Marque Audio ( ) lors de la
lecture d’un disque Blu-ray contenant ce type de données.
Oui
*
, Non
Dernière Mémoire
Ce paramètre permet de définir si le lecteur mémorise ou
non le dernier emplacement de lecture d’un disque (Blu-
ray ou DVD vidéo) quand l’appareil passe en veille ou que
vous ouvrez le plateau.
Oui
*
, Non
Certains disques ne sont pas compatibles avec cette
fonction.
DivX(R) VOD DRM
Ce paramètre permet d’afficher le code d’enregistrement
des films au format DivX(R).
Sous-titres DivX®
Permet d’activer l’affichage de sous-titres pour les films
au format DivX(R).
Oui, Non
*
Sécurité
Modification du mot de passe
Vous pouvez définir le mot de passe applicable aux fonctions
Niveau de Contrôle Parental et Code pays. Reportez-vous à la
section « Contrôle Parental » (p. 31) et « Code pays » (p. 31).
Le mot de passe par défaut est 0000.
Si vous avez oublié le mot de passe, reportez-vous à
« Guide de dépannage » (p. 38) et réglez tous les
paramètres Sécurité sur leurs valeurs par défaut.
Contrôle Parental
Ce lecteur permet de limiter l’accès au contenu de certains
disques Blu-ray/DVD selon l’âge du public. Il suffit pour
cela de configurer le paramètre Contrôle Parental en
fonction du contenu du disque.
Le mot de passe (voir « Modification du mot de passe » en
p. 31) a besoin d’être saisi avant de régler les niveaux de
Contrôle Parental.
Une fois la fonction Contrôle Parental configurée, une
boîte de dialogue invite l’utilisateur à saisir ce mot de passe
s’il charge un disque d’un niveau de filtrage supérieur au
niveau de Contrôle Parental actuellement défini, ou s’il
souhaite modifier le niveau de Contrôle Parental.
Non*, 1–8
Code pays
Ce paramètre permet de définir le Code du pays où vous
vivez. Avant de configurer le paramètre Code pays, vous
devez d’abord choisir un mot de passe (voir la section
« Modification du mot de passe » en p. 31). Ce paramètre peut
servir à évaluer le niveau de filtrage du Contrôle Parental et à
autoriser la lecture du disque en fonction du pays.
Réseau
Configuration de Connexion
Vous pouvez sélectionner une méthode de connexion au réseau.
Information
Permet d’afficher un écran d’informations au sujet du réseau.
Ce paramètre permet d’afficher un écran d’informations au
sujet du réseau de manière à connaître l’interface (Ethernet),
le Type d’adresse, l’Adresse IP, le Masque sous-réseau, la
Passerelle par défaut et le DNS utilisés.
Remarque
Remarques
Câble* Permet de se connecter au réseau via Ethernet.
Sans Fil Permet de se connecter au réseau en utilisant un
réseau LAN sans fil.
Vous pouvez choisir les paramètres pour une connexion
LAN sans fil. Pour cela, suivez les instructions à l’écran.
Recherche
Recherche un point d’accès. Vous pouvez vous
connecter au point d’accès trouvé.
Manuel
Vous pouvez saisir manuellement les informations
relatives à un point d’accès.
Auto
Si votre point d’accès prend en charge la fonction
WPS (Wi-Fi Protected Setup), vous pouvez effectuer
automatiquement ces réglages et connecter le lecteur
au point d’accès sans devoir saisir manuellement des
informations. Sélectionnez la méthode PBC (Push
Button Configuration, ou configuration via pression
des touches) ou la méthode code PIN.
32 Fr
Menu SETUP
Test de connexion
Vous pouvez effectuer un test de connexion Internet. En
cas d’échec, vérifiez la « Configuration IP » (p. 32) et
recommencez le test.
Configuration IP
Permet de configurer les paramètres de réseau.
Numeric keys Permettent la saisie de caractères.
2/3 Déplacent la mise en surbrillance.
CLEAR Efface un caractère.
ENTER Permet de sauvegarder les
réglages et de quitter le menu.
Paramètres Proxy
Vous pouvez configurer les Paramètres Proxy. Réglez ce
paramètre sur Désactivé dans le cadre d’une utilisation
normale. Réglez ce paramètre sur Permettre pour
configurer les paramètres proxy.
Pilotage réseau
Permet de régler le paramètre de commande des appareils
connectés via Ethernet sur Oui/Non. Quand Activer le contrôle
du lecteur en filtrant les adresses MAC est sélectionné, vous
pouvez définir les adresses MAC des dispositifs du réseau
auxquels vous autorisez l’accès à ce lecteur. Ce lecteur adopte
le Yamaha Network Control protocol (YNC).
Oui
*
, Activer le contrôle du lecteur en filtrant les adresses MAC, Non
Lorsque le Pilotage réseau est activé, la
consommation d’énergie en mode veille augmente
en raison de la fonction de pilotage du réseau.
De la même façon, avec le paramètre sur Oui, la
durée de démarrage du système est plus courte.
Veille Réseau
Permet de définir si ce lecteur peut être mis sous tension
depuis d’autres dispositifs du réseau tels que
« AV CONTROLLER » (p. 22).
Oui, Non
*
Ce réglage est disponible uniquement quand Pilotage
réseau est actif.
Contrôle DMC
Permet de définir si ce lecteur peut être commandé via un
contrôleur de supports numériques (fonction Digital
Media Controller ou DMC) compatible DLNA (p. 15).
Permettre
*
, Désactivé
Connexion BD-Live
Ce paramètre permet de restreindre l’accès aux contenus
BD-Live.
Paramètres vidéo
Les réglages par défaut sont signalés par «
*
».
TV
Sortie 3D
Permet de choisir le mode vidéo 3D ou 2D de ce lecteur.
Même si vous avez réglé « Sortie 3D » sur « Auto »
et lisez un disque Blu-ray 3D, il se peut que le
lecteur sélectionne le mode vidéo 2D selon les
réglages du téléviseur, etc.
Écran TV
Vous pouvez régler le format d’image du téléviseur
raccordé et modifier la sortie vidéo.
Si vous changez de téléviseur (vous en achetez un
nouveau, par exemple) et que le format d’image du
téléviseur raccordé est différent, vous devrez alors
modifier le paramètre Écran TV.
Auto* Choisissez cette option pour configurer
automatiquement les paramètres de réseau de ce
lecteur avec le serveur DHCP.
Manuel Choisissez cette option pour configurer
manuellement les paramètres de réseau (Adresse IP,
Masque sous-réseau, Passerelle par défaut et DNS).
Astuces
Désactivé
*
Désactive le serveur proxy. Choisissez ce réglage si
vous ne comptez pas utiliser de serveur proxy.
Permettre Permet de régler l’hôte proxy et le port proxy.
Hôte Proxy Permet de configurer l’hôte proxy.
Port Proxy Permet de configurer le port proxy.
Remarques
Remarque
Autorisé Tous les disques BD-Live sont autorisés à se
connecter au réseau.
Partiellement
autorisé
*
Seuls les disques avec identification du propriétaire
sont autorisés.
Interdit La connexion au réseau est interdite pour tous les
disques BD-Live.
Auto* Le lecteur sélectionne automatiquement le mode
vidéo 3D ou 2D selon le support.
Non Le lecteur sélectionne toujours le mode vidéo 2D.
Remarque
16:9 Plein Sélectionnez ce réglage si vous raccordez le lecteur à
un téléviseur au format 16:9. En cas de lecture d’une
vidéo au format 4:3, l’illustration ci-après représente
la façon dont les images sont affichées à l’écran.
16:9 Normal
*
Sélectionnez ce réglage si vous raccordez le lecteur à
un téléviseur au format 16:9. En cas de lecture d’une
vidéo au format 4:3, l’illustration ci-après représente
la façon dont les images sont affichées à l’écran.
4:3 Pan Scan Sélectionnez ce réglage si vous raccordez le lecteur à
un téléviseur au format 4:3. En cas de lecture d’une
vidéo au format 16:9, l’illustration ci-après représente
la façon dont les images sont affichées à l’écran.
4:3 Boîte à
lettre
Sélectionnez ce réglage si vous raccordez le lecteur à
un téléviseur au format 4:3. En cas de lecture d’une
vidéo au format 16:9, l’illustration ci-après représente
la façon dont les images sont affichées à l’écran.
Format d’image
d’origine
Sur un téléviseur 16:9 (grand écran)
16:9 Plein 16:9 Normal
4:3
33 Fr
Menu SETUP
Paramètres
4
Français
Résolution HDMI
Vous pouvez choisir la résolution de sortie vidéo HDMI.
Pour en savoir plus sur les formats de sortie disponibles,
reportez-vous à la section « À propos des formats de sortie
vidéo HDMI » (p. 36).
Si vous réglez ce paramètre sur Auto, le lecteur
sélectionne automatiquement la résolution maximale en
fonction du téléviseur raccordé.
Lorsqu’il est réglé sur Format vidéo du disque original, la
résolution et la fréquence vidéo originales enregistrées sur
le disque Blu-ray ou le DVD en cours de lecture sont
utilisées. Vous pouvez utiliser la fonction de convertisseur
vidéo ascendant d’un appareil externe.
Lors de la lecture d’un support autre qu’un disque Blu-ray
ou un DVD, la résolution et la fréquence vidéo
fonctionnent en mode Auto.
Si un disque Blu-ray ou un DVD ont une résolution et une
fréquence vidéo qui ne sont pas compatibles avec le
téléviseur raccordé, aucune image ne sera restituée. Dans
ce cas, arrêtez la lecture et choisissez une option autre que
Format vidéo du disque original.
Auto
*
, Format vidéo du disque original, 480i/576i,
480p/576p, 720p, 1080i, 1080p
Pour reproduire de l’audio HD (Dolby TrueHD ou
DTS-HD Master Audio) depuis la borne HDMI,
réglez Résolution HDMI sur Auto ou sur une qualité
supérieure à 720p.
Système TV
Le paramètre Système TV permet de choisir l’une des
normes de diffusion suivantes : PAL, NTSC et Multi.
Choisissez le même réglage pour Système TV que sur
votre téléviseur. Pour en savoir plus sur les formats de
sortie disponibles, reportez-vous à la section « À propos
des formats de sortie vidéo HDMI » (p. 36).
Espace de couleur
Ce paramètre permet de sélectionner l’Espace de couleur
(p. 41) du signal HDMI. Cette fonction est disponible à
condition de raccorder ce lecteur via un câble HDMI.
Cette fonction est disponible uniquement sur les
téléviseurs compatibles.
HDMI Deep Color
Réglez ce paramètre en fonction de votre téléviseur et/ou
ampli-tuner AV si ceux-ci sont compatibles avec la
technologie Deep Color (p. 41). Cette fonction est
disponible à condition de raccorder ce lecteur via un câble
HDMI.
30 bits, 36 bits, 48 bits, Non
*
HDMI 1080p 24Hz
Ce paramètre a pour effet de reproduire le signal BD
Vidéo codé à une vitesse de 24 Hz sous forme de signal
HDMI 1080p 24Hz. Cela permet, dans certains cas,
d’améliorer la fluidité des images. Cette fonction est
uniquement disponible si votre téléviseur/ampli-tuner AV
est compatible. Pour en savoir plus sur les formats de
sortie disponibles, reportez-vous à la section « À propos
des formats de sortie vidéo HDMI » (p. 36).
Auto
*
, Non
Ce paramètre est désactivé pour toute résolution de
sortie autre que 1080p.
Processus Vidéo
Réduction de bruit
Vous pouvez régler Réduction de bruit sur un niveau de 0
à 3. La valeur 0 désactive la fonction, 3 indique le niveau
maximum.
0, 1, 2
*
, 3
Désentrelacement vidéo
Vous pouvez régler la manière de détecter le signal vidéo.
Réglez ce paramètre sur Auto dans le cadre d’une
utilisation normale. En présence de parasites en bandes
horizontales à l’écran, réglez ce paramètre sur Film/Vidéo
pour supprimer ces parasites.
Auto
*
, Film, Vidéo
Sous-titres pour malentendants
Attributs ST
Vous pouvez régler le style des sous-titres pour
malentendants. L’option Auto active le style par défaut des
sous-titres pour malentendants. L’option Personnalisé permet
de personnaliser manuellement le style des sous-titres pour
malentendants (Couleur de police, Taille de police, etc.).
Auto, Personnalisé
Couleur de police, Taille de police, Style
de police, Opacité de police, Netteté de
police, Couleur Arrête Police, Couleur
arrière-plan, Opacité arrière-plan, Couleur
de fenêtre, Opacité de fenêtre
Permet de personnaliser la police, le fond et la fenêtre
utilisés pour les sous-titres pour malentendants quand
Attributs ST est réglé sur Personnalisé.
Format d’image
d’origine
Sur un téléviseur 4:3
4:3 Pan Scan 4:3 Boîte à lettre
16:9
Remarque
NTSC, PAL, Multi
(Les réglages par défaut diffèrent selon le modèle du lecteur.)
YCbCr 4:4:4
*
Règle l’Espace couleur sur YCbCr 4:4:4.
YCbCr 4:2:2 Règle l’Espace couleur sur YCbCr 4:2:2.
Full RGB Lorsque RGB est réglé et que le blanc et le noir à
l’écran sont trop pâles, sélectionnez ce réglage. Ce
paramètre est valide lorsque le composant raccor
prend en charge la plage RGB 0-255.
RGB
Émet le signal vidéo dans la plage de signaux normale.
Remarque
Remarque
34 Fr
Menu SETUP
Paramètres audio
Les réglages par défaut sont signalés par «
*
».
Sortie audio
Coaxial / Optique
Ce paramètre permet de choisir le mode de sortie du
connecteur COAXIAL et de la borne OPTICAL. Pour en
savoir plus sur les formats de sortie disponibles, reportez-vous
à la section « À propos des formats de sortie audio » (p. 35).
HDMI
Ce paramètre permet de choisir le mode de sortie de la borne
HDMI. Pour plus de détails à ce sujet, reportez-vous à la
section « Coaxial / Optique » (p. 34). Pour en savoir plus sur
les formats de sortie disponibles, reportez-vous à la section
« À propos des formats de sortie audio » (p. 35).
Bitstream
*
, PCM, Reencode, Non
Pour reproduire de l’audio HD (Dolby TrueHD ou
DTS-HD Master Audio) depuis la borne HDMI,
réglez Resolution sur Auto ou sur une qualité
supérieure à 720p (p. 33).
Échantillonnage Inférieur
Ce paramètre permet de sélectionner la fréquence de sous-
échantillonnage du signal audio. Cette fonction s’applique
à la sortie du signal audio du connecteur COAXIAL/de la
borne OPTICAL.
DRC
Permet d’activer/désactiver/régler sur Auto la fonction
DRC (Dynamic Range Compression) (p. 41). Lorsqu’elle
est réglée sur Auto, la fonction DRC est automatiquement
activée pour les sources contenant des informations DRC
au format Dolby TrueHD. La fonction DRC a pour effet
d’atténuer les sons trop puissants tels que les consonnes
occlusives, rendant les dialogues plus intelligibles. Cela
est particulièrement utile lorsque vous regardez des films
tard dans la nuit.
Non, Oui, Auto
*
Sortie SACD
Priorité SACD
Sélectionne la priorité de lecture pour des contenus
bicanal ou multicanal, lorsque le disque contient les deux
types de contenus.
Multi-canaux
*
, 2 canaux
Couche SACD/CD
Sélectionne la couche à lire pour la lecture d’un disque
hybride SA-CD/CD.
SACD
*
, CD
L’indicateur SA-CD du panneau avant s’allume
lorsqu’un SA-CD est inséré et que la couche SA-CD
est sélectionnée.
Ce réglage est disponible uniquement lorsqu’aucun
disque n’est inséré.
Lorsque la couche SA-CD est sélectionnée, les
signaux audio ne sont pas émis de la borne
COAXIAL ou de la prise OPTICAL (p. 13).
Configuration Haut-Parleur
Mixage en 2 canaux stéréo
Vous pouvez sélectionner la méthode de mixage sur 2
canaux analogiques : Stéréo ou Gauche/Droite.
Post process
UpMix
Vous pouvez reproduire le signal audio 2 canaux en son
multicanal. Pour ceci, sélectionnez DTS NEO:6, puis le
mode Cinema ou Musique.
Non
*
, DTS NEO:6
Système d’information
Ce paramètre permet d’afficher la version logicielle et
l’adresse MAC (p. 42).
Bitstream Génère un signal numérique sans aucun traitement.
Les données audio secondaires ne sont pas prises en
compte.
PCM Génère un signal PCM sur 2 canaux.
Reencode
*
Génère un signal Bitstream avec les données audio
secondaires.
Non Coupe le son.
Remarque
48K
*
La fréquence d’échantillonnage la plus élevée de la
sortie PCM numérique équivaut à 48 kHz.
96K La fréquence d’échantillonnage la plus élevée de la
sortie PCM numérique équivaut à 96 kHz.
192K La fréquence d’échantillonnage la plus élevée de la
sortie PCM numérique équivaut à 192 kHz.
Astuce
Remarques
Stéréo
*
Modifie la sortie de canal sur stéréo, ce qui reproduit
uniquement le son sur les deux enceintes avant.
Gauche/
Droite
Choisissez ce réglage si l’appareil est raccordé à un
décodeur Dolby Pro Logic. Le son des deux
enceintes arrière est mixé sur 2 canaux stéréo.
35 Fr
Menu SETUP
Paramètres
4
Français
À propos des formats de sortie audio
*1 « SA » désigne les données audio secondaires (Secondary Audio). « BCS » représente le son émis lors du clic d’un
bouton, l’effet sonore pour les menus contextuels, etc.
*2 Pour USB, DLNA et les services de réseau, les options PCM et son mixé sur 2 canaux ne sont pas disponibles (son
coupé).
*3 Pour USB, DLNA et les services de réseau, l’option Reencode n’est pas disponible (le signal de sortie est dans le
même format que bitstream).
Si le paramètre Coaxial / Optique ou HDMI est réglé sur Bitstream, aucune donnée audio secondaire n’est émise.
(p. 34)
Pour reproduire de l’audio HD (Dolby TrueHD ou DTS-HD Master Audio) depuis la borne HDMI, réglez
Résolution HDMI sur Auto ou sur une qualité supérieure à 720p (p. 33).
Formats de sortie audio
Format de la source
HDMI COAXIAL / OPTICAL MIXED 2CH
Bitstream PCM Reencode Bitstream PCM Reencode
PCM 2ch
avec SA ou
BCS
*1
PCM 2ch Dolby Digital PCM 2ch Dolby Digital 2ch
sans SA ni
BCS
*1
PCM 2ch PCM 2ch 2ch
PCM 5.1ch
avec SA ou
BCS
*1
PCM 5.1ch Dolby Digital PCM 2ch Dolby Digital 2ch
sans SA ni
BCS
*1
PCM 5.1ch PCM 2ch 2ch
PCM 7.1ch
avec SA ou
BCS
*1
PCM 7.1ch Dolby Digital PCM 2ch Dolby Digital 2ch
sans SA ni
BCS
*1
PCM 7.1ch PCM 2ch 2ch
Dolby Digital
avec SA ou
BCS
*1
Dolby Digital
PCM jusqu’à
5.1 canaux
Dolby Digital Dolby Digital PCM 2ch Dolby Digital 2ch
sans SA
ni
BCS
*1
Dolby Digital
Plus
avec SA ou
BCS
*1
Dolby Digital
Plus
PCM jusqu’à
7.1 canaux
Dolby Digital
Dolby Digital PCM 2ch Dolby Digital 2ch
sans SA
ni
BCS
*1
Dolby Digital
Plus
Dolby
TrueHD
avec SA ou
BCS
*1
Dolby
TrueHD
PCM jusqu’à
7.1 canaux
Dolby Digital
Dolby Digital PCM 2ch Dolby Digital 2ch
sans SA
ni
BCS
*1
Dolby
TrueHD
DTS
avec SA ou
BCS
*1
DTS
PCM jusqu’à
5.1 canaux
*2
DTS
*3
DTS
PCM 2ch
*2
DTS
*3
2ch
*2
sans SA
ni
BCS
*1
DTS HD High
Resolution
avec SA ou
BCS
*1
DTS-HD High
Resolution
PCM jusqu’à
7.1 canaux
*2
DTS
*3
DTS
PCM 2ch
*2
DTS
*3
2ch
*2
sans SA
ni
BCS
*1
DTS HD High
Resolution
*3
DTS-HD
Master Audio
avec SA ou
BCS
*1
DTS-HD
Master Audio
PCM jusqu’à
7.1 canaux
*2
DTS
*3
DTS
PCM 2ch
*2
DTS
*3
2ch
*2
sans SA
ni
BCS
*1
DTS-HD
Master
Audio
*3
Remarques
Paramètre Priorité SACD
(p. 34)
HDMI COAXIAL / OPTICAL
MIXED 2CH
Multi-canaux PCM jusqu’à 5.1 canaux Aucune sortie 2ch
2 canaux PCM jusqu’à 2 canaux Aucune sortie 2ch
36 Fr
Menu SETUP
À propos des formats de sortie vidéo HDMI
Si Système TV est réglé sur NTSC
Si Système TV est réglé sur PAL
*1 Max dans le tableau indique qu’il s’agit de la résolution maximale prise en charge par le téléviseur raccordé. Par
exemple, si la résolution maximale prise en charge par le téléviseur raccordé est de 1080p, la résolution sera portée à
1080p.
*2 La résolution et la fréquence seront celles du disque source.
*3 Si le paramètre Auto est activé pour HDMI 1080p 24Hz et que le téléviseur connecté prend en charge l’émission de
contenu 1080p 24Hz, c’est le format 1080p 24 Hz qui sera utilisé au lieu du format 1080p 50/60 Hz.
Si Système TV est réglé sur Multi
Lorsque Système TV est réglé sur Multi, le signal vidéo est émis à la même fréquence que la source. Reportez-vous aux
tableaux ci-dessous pour plus de détails sur le réglage de fréquences sur le téléviseur et la résolution du signal de sortie
vidéo.
Le paramètre HDMI 1080p 24Hz est désactivé pour toute résolution de sortie autre que 1080p.
Si le paramètre Système TV est réglé sur NTSC et que la source vidéo est différente de 60 Hz, le signal de sortie
vidéo est converti en 60 Hz.
Si le paramètre Système TV est réglé sur PAL et que la source vidéo est différente de 50 Hz, le signal de sortie
vidéo est converti en 50 Hz.
Table des matières
Résolution HDMI
Auto
Format vidéo
du disque
original
1080p 1080i 720p 480p/576p 480i/576i
BD-Video avec
un contenu 1080p/
24Hz
*
1
1080p 24Hz
1080p 24Hz/
60Hz
*3
1080i 60Hz 720p 60Hz 480p 480i
BD-Video avec un
contenu 1080p/24Hz
*
1
*
2
1080p 60Hz 1080i 60Hz 720p 60Hz 480p 480i
DVD-Video
*
1
*
2
1080p 60Hz 1080i 60Hz 720p 60Hz 480p 480i
Autres
*
1
*
1
1080p 60Hz 1080i 60Hz 720p 60Hz 480p 480i
Table des matières
Résolution HDMI
Auto
Format vidéo
du disque
original
1080p 1080i 720p 480p/576p 480i/576i
BD-Video avec
un contenu 1080p/
24Hz
*
1
1080p 24Hz
1080p 24Hz/
50Hz
*3
1080i 50Hz 720p 50Hz 576p 576i
BD-Video sans
contenu 1080p/24Hz
*
1
*
2
1080p 50 Hz 1080i 50Hz 720p 50Hz 576p 576i
DVD-Video
*
1
*
2
1080p 50 Hz 1080i 50Hz 720p 50Hz 576p 576i
Autres
*
1
*
1
1080p 50 Hz 1080i 50Hz 720p 50Hz 576p 576i
Remarques
37 Fr
Paramètres
4
Français
Des mises à jour du logiciel intégrant de nouvelles fonctions ou apportant des améliorations au produit seront proposées
régulièrement. Nous vous conseillons de mettre régulièrement à niveau le logiciel de ce lecteur.
Pour savoir si une nouvelle mise à niveau logicielle est disponible, rendez-vous sur le site Web suivant :
http://download.yamaha.com/
Ne retirez pas la clé USB, ne mettez pas le lecteur en mode veille ou ne débranchez pas le cordon d’alimentation/
câble de connexion au réseau tant que la mise à niveau n’est pas terminée.
Mise à niveau du logiciel
1. Préparez la mise à niveau du
logiciel.
Si vous effectuez la mise à niveau du logiciel à partir
de la clé USB :
1 Enregistrez le fichier de mise à niveau dans le
dossier approprié sur la clé le disque/la clé USB.
Pour en savoir plus, reportez-vous aux
instructions fournies avec le fichier de mise à
niveau.
2 Connectez la clé USB.
Si vous effectuez la mise à niveau du logiciel à partir
du réseau :
Assurez-vous que le lecteur est raccordé au
réseau.
2. Sélectionnez la méthode de mise à
niveau et lancez la mise à niveau à
partir du menu SETUP.
1 Appuyez sur SETUP pour afficher l’écran de
menu SETUP.
2 Sélectionnez Réglages Généraux = Système =
Mettre à niveau.
3 Sélectionnez l’élément contenant le fichier de
mise à niveau : Avec une clé USB/Réseau.
Le système recherche le fichier de mise à niveau.
3. Effectuez la mise à niveau du
logiciel en suivant les instructions
affichées à l’écran.
La mise à niveau est terminée. le système est
réinitialisé.
Mise à niveau logicielle
Remarque
38 Fr
INFORMATIONS COMPLÉMENTAIRES
Reportez-vous au tableau suivant si ce lecteur ne fonctionne pas convenablement. Si l’anomalie constatée n’est pas
mentionnée ou si les actions correctives suggérées sont sans effet, mettez le lecteur hors tension, débranchez le cordon
d’alimentation et prenez contact avec un revendeur agréé ou le service après-vente de Yamaha.
Alimentation
Opérations de base
Lecture de disque
Guide de dépannage
Anomalies Causes possibles et solutions
Le lecteur ne s’allume pas. Vérifiez si le cordon d’alimentation est branché correctement.
Pensez à appuyer sur le bouton p sur le panneau avant pour mettre le lecteur sous
tension.
L’alimentation du lecteur est coupée. Le lecteur est automatiquement mis hors tension quand 20 minutes se sont écoulées sans
aucune activité (de lecture) et que la fonction de Veille Automatique est active (p. 30).
Anomalies Causes possibles et solutions
La télécommande ne fonctionne pas. Utilisez la télécommande dans son rayon d’action. (p. 10)
Remplacez les piles. (p. 10)
rifiez les paramètre d’ID de l’appareil principal et de la télécommande. L’ID de la
télécommande peut être modifiée lorsque l’appareil principal est réinitialisé. Dans ce
cas, vérifiez l’ID de la télécommande sur l’appareil principal, et réglez-la à nouveau si
nécessaire. (p. 10)
Les touches ne fonctionnent pas.
Maintenez le bouton p du panneau avant enfoncé pendant 5 secondes au moins pour
réinitialiser le lecteur.
Pour procéder à une réinitialisation complète du lecteur, débranchez le cordon
d’alimentation de la prise secteur pendant 30 secondes ou plus, rebranchez-le à la prise
secteur, puis allumez le lecteur.
Vous avez oublié le mot de passe.
Maintenez les boutons , et du panneau avant enfoncés simultanément en
veillant à ce que le lecteur ne contienne pas de disque et soit à l’arrêt pour initialiser tous
les paramètres du lecteur, y compris ses réglages de sécurité (p. 31). Après la mise hors
tension automatique du lecteur, appuyez sur p pour le remettre sous tension.
Anomalies Causes possibles et solutions
Le lecteur ne peut pas lire le disque. Retirez le disque et nettoyez-le. (p. 5)
Assurez-vous que le disque est inséré correctement (bien aligné sur le plateau de disque
et face imprimée vers le haut). (p. 5)
Utilisez un disque compatible avec le lecteur. (p. 3)
Retirez le disque et assurez-vous que le lecteur prend en charge ce type de disque. (p. 3)
rifiez le code de région. (p. 3)
Vérifiez si le disque est défectueux en essayant de lire un autre disque.
Les disques CD-R/RW, DVD+R/RW/R DL et DVD-R/RW/R DL doivent être finalisés.
(p. 3)
La vidéo s’arrête. Le lecteur s’arrête s’il ressent des chocs ou des vibrations.
Le lecteur produit un bruit sec au
démarrage de la lecture ou à l’insertion
d’un disque.
Ces bruits ne sont pas le signe d’un dysfonctionnement du lecteur, mais sont le reflet de
conditions de fonctionnement normal.
Le démarrage de la lecture des disques
Blu-ray prend du temps.
Le lecteur recherche une clé/un disque USB utilisé comme espace de stockage externe
pour la fonction BD-Live (p. 26) quand vous chargez un disque Blu-ray. Pour réduire la
durée d’attente, conservez une clé/un disque USB raccordé à l’un des ports USB (en
face avant/arrière) du lecteur (p. 16).
39 Fr
Guide de dépannage
Informations complémentaires
5
Français
Image
Son
Réseau
Anomalies Causes possibles et solutions
Absence d’image. Assurez-vous que les câbles sont branchés correctement. (p. 11)
Assurez-vous que l’entrée sélectionnée sur le téléviseur ou l’ampli-tuner AV raccordé
au lecteur est correcte.
Lorsqu’aucun disque n’est inséré ou lorsque la lecture est arrêtée, appuyez et maintenez
les boutons et du panneau avant enfoncés simultanément pour réinitialiser la
résolution vidéo.
Si aucune image n’apparaît, appuyez et maintenez le bouton du panneau avant
enfoncé pendant 5 secondes environ pour commuter sur NTSC/PAL.
Lorsque le lecteur est réglé sur Format vidéo du disque original, un signal non
compatible avec le téléviseur raccordé est émis. Modifiez le réglage afin d’émettre en
sortie un signal compatible avec le téléviseur raccordé. (p. 33)
Vérifiez que le disque ou fichier que vous tentez de lire est compatible avec ce lecteur
(p. 3).
L’écran se fige et les touches n’ont
aucun effet.
Appuyez sur , puis redémarrez la lecture.
Éteignez, puis rallumez le lecteur.
Maintenez le bouton p du panneau avant enfoncé pendant 5 secondes au moins pour
réinitialiser le lecteur.
La résolution de la vidéo n’est pas celle
qui convient.
Choisissez la résolution appropriée. (p. 33)
La vidéo grand écran apparaît étirée
verticalement ou des bandes noires
apparaissent en haut et en bas de
l’écran. Ou encore l’image 4:3 est étirée
dans le sens horizontal.
Changez le format d’image du téléviseur. (p. 32)
Des carrés (effet de mosaïque)
apparaissent à l’écran.
Ce type de parasite est lié à la technologie de compression des images numériques
notamment dans les scènes rapides.
Anomalies Causes possibles et solutions
Pas de son ou le son est déformé. Vérifiez si le câble audio est raccordé correctement. (p. 11)
Augmentez le volume du téléviseur ou de l’ampli-tuner AV.
Rappelez-vous qu’aucun son n’est produit en mode arrêt sur image, lors de l’avance
rapide et du retour rapide. (p. 9)
Le son peut ne pas être émis selon l’état d’enregistrement audio, par exemple, lorsqu’un
son autre qu’un signal audio ou un son non standard est enregistré comme contenu
audio. (p. 3)
Vérifiez que le disque ou fichier que vous tentez de lire est compatible avec ce lecteur
(p. 3).
Les pistes audio gauche et droite sont
inversées ou le son n’est émis que d’un
côté.
Vérifiez la connexion audio. (p. 13)
Le type de son et/ou le nombre de
canaux voulu n’est pas disponible.
Reportez-vous au paramètre Sortie audio et à la section .« À propos des formats de
sortie audio ». (p. 34, p. 35)
Aucun son (données audio secondaires)
n’est émis pour la fonction
d’incrustation PIP (image dans l’image).
Réglez Coaxial / Optique ou HDMI sur PCM/Reencode. (p. 34)
Pour écouter les données audio secondaires, appuyez sur 2ND AUDIO. (p. 9)
Sur certains disques, il peut être nécessaire d’activer en plus les données audio
secondaires dans le menu supérieur du disque. (p. 9)
Anomalies Causes possibles et solutions
Impossible de se connecter à Internet. Lorsque vous vous connectez à Internet en choisissant Câble dans Paramètres de
connexion, raccordez le câble réseau correctement. (p. 31)
Vérifiez si l’équipement raccordé (routeur haut débit ou modem) est sous tension.
Assurez-vous que le routeur haut débit et/ou le modem est connecté correctement.
Si Sans Fil est choisi dans Paramètres de connexion, et lorsque vous souhaitez vous
connecter à internet en utilisant Ethernet, sélectionnez correctement Câble. (p. 31)
lectionnez correctement Sans Fil dans Paramètres de connexion lorsque vous
souhaitez vous connecter à Internet en utilisant un réseau LAN sans fil. (p. 31)
40 Fr
Guide de dépannage
Messages d’erreur à l’écran
Les messages suivants apparaissent sur l’écran du téléviseur si le disque que vous essayez de lire ne convient pas ou
si l’opération est incorrecte.
Impossible de télécharger le contenu
BD-Live.
Vérifiez que le lecteur peut se connecter normalement à Internet. Reportez-vous à la
section « Test de connexion ». (p. 32)
Vérifiez si la clé USB est insérée correctement. Assurez-vous que la clé USB est reliée
au port USB du lecteur. (p. 16)
Vérifiez si le disque Blu-ray prend en charge la fonction BD-Live.
Utilisez une clé USB au format FAT16, FAT32 ou NTFS.
Il est recommandé de connecter une clé USB possédant au moins 2Go d’espace libre. Si
l’espace disponible n’est pas suffisant, formatez la clé USB. (p. 30)
Reportez-vous au mode d’emploi fourni avec le disque ou contactez son fabricant.
Impossible de détecter le serveur DLNA. Vérifiez que le lecteur peut se connecter normalement au réseau. Reportez-vous à la
section « Test de connexion ». (p. 32)
Vérifiez si l’équipement raccordé (routeur haut débit ou serveur) est sous tension.
Assurez-vous d’utiliser le même routeur (ou point d’accès) pour connecter le lecteur et
le serveur.
Selon le serveur DLNA utilisé, il est possible que vous deviez autoriser l’utilisation de
ce lecteur à partir du serveur.
Selon le serveur DLNA utilisé, il peut être nécessaire de modifier un des paramètres du
pare-feu.
Impossible de lire le fichier sur le
serveur DLNA.
Assurez-vous que le format du fichier est reconnu. (p. 3)
Vérifiez le paramètre de configuration de votre serveur DLNA.
Les conditions de fonctionnement de votre réseau domestique peuvent avoir une
incidence sur le mode d’exécution et la qualité de lecture du fichier.
Impossible de se connecter à Internet
via le réseau LAN sans fil.
Assurez-vous que le routeur du réseau LAN sans fil est sous tension.
En fonction de l’environnement immédiat, tel que le matériau dont les murs sont
constitués, les conditions de réception des ondes radio, ou les obstacles existant entre le
lecteur et le routeur LAN sans fil, la distance de communication peut être réduite.
Rapprochez le lecteur et le routeur LAN sans fil l’un de l’autre.
Les appareils utilisant une bande de fréquence de 2,4 GHz, tels qu’un four à micro-
ondes, un appareil numérique sans fil ou Bluetooth, sont susceptibles d’interrompre la
communication. Éloignez le lecteur de ces appareils ou mettez-les hors tension.
Si la connexion Internet utilisant un réseau LAN sans fil ne peut toujours pas être
rétablie en appliquant les deux solutions ci-dessus, essayez d’utiliser Ethernet en
sélectionnant Câble dans Paramètres de connexion. (p. 31)
Le réseau sans fil n’est pas détecté ou
est perturbé.
Assurez-vous que le routeur du réseau LAN sans fil est sous tension.
Rapprochez le lecteur du routeur, changez la position du lecteur ou réorientez l’antenne
du routeur LAN sans fil.
Si vous n’arrivez pas à configurer la connexion sans fil avec la fonction WPS,
sélectionnez une autre option (Recherche ou Manuel) (p. 18).
Assurez-vous que le réseau sans fil n’est pas perturbé par un four à micro-ondes, un
téléphone numérique sans fil ou tout autre appareil sans fil présent dans
l’environnement immédiat.
Les fours à micro-ondes, les téléphones numériques sans fil ou d’autres appareils sans
fil présents dans votre environnement immédiat sont susceptibles de perturber le réseau
sans fil. Mettez ces appareils hors tension.
Assurez-vous que les pare-feux de votre réseau permettent d’accéder à la connexion
sans fil de ce lecteur.
Si le réseau sans fil ne fonctionne pas correctement chez vous, essayez d’utiliser la
connexion réseau filaire.
Message d’erreur Causes possibles et solutions
Fichier non supporté Le fichier n’est pas reconnu par le lecteur. Voir la section « Types de disques/fichiers utilisables avec
ce lecteur » (p. 3).
Code zone incorrect Le code de région du disque n’est pas compatible. Voir la section « Information sur la gestion des
régions pour les disques Blu-ray/DVD vidéo. » (p. 3).
Échec réseau
Le lecteur ne peut pas être connecté au réseau. Vérifiez la connexion (p. 14) et le paramètre Réseau (p. 31).
Réseau OK, échec proxy Le lecteur ne peut pas être connecté au serveur proxy. Voir la section « Paramètres Proxy » (p. 32).
La fonction BD-LIVE n’est pas
autorisée dans le menu SETUP.
La fonction BD-LIVE n’est pas autorisée. Voir la section « Connexion BD-Live » (p. 32).
La mise à jour a échoué. La mise à niveau a échoué. Assurez-vous que le fichier de mise à niveau n’est pas corrompu ou
illisible.
Adresse IP incorrecte ! Merci
de recommencer...
La Configuration IP saisie n’est pas valide. Ressaisissez l’information correcte.
Anomalies Causes possibles et solutions
41 Fr
Informations complémentaires
5
Français
AVCHD
AVCHD désigne un nouveau format (norme) pour les
caméras vidéo haute définition qui permet d’enregistrer
et de lire des images HD de haute résolution.
BD-Live™
BD-Live est une norme Blu-ray Disc utilisant une
connexion réseau, permettant à ce lecteur de se mettre
en ligne pour télécharger des vidéos promotionnelles
ainsi que d’autres données.
BDMV
BDMV (abréviation de Blu-ray Disc Movie) fait
référence à un des formats d’application utilisés pour les
BD-ROM, lequel correspond à une des spécifications des
disques Blu-ray. BDMV est un format d’enregistrement
équivalent au DVD vidéo de la norme DVD.
Blu-ray 3D™
Le format Blu-ray 3D permet de bénéficier d’images 3D
en haute définition (Full HD).
BONUSVIEW™
Les disques compatibles BONUSVIEW permettent de
bénéficier simultanément d’un sous-canal vidéo pour un
système à deux écrans, d’un sous-canal audio et de sous-
titres. Un petit écran apparaît en incrustation (image dans
l’image) à l’intérieur de l’écran principal pendant la lecture.
Sous-titres pour malentendants
Les sous-titres pour malentendants sont une sorte de sous-
titres, la différence est dans le fait que les sous-titres sont
destinés aux personnes entendantes et les sous-titres pour
malentendants aux personnes malentendantes. Les sous-
titres reflètent rarement tous les sons.
Par exemple, les sous-titres pour malentendants indiquent
les effets sonores (« Sonnerie de téléphone », «Bruits de
pas », etc.), alors que cela n’est pas le cas dans les sous-
titres ordinaires. Avant d’activer ce paramètre, assurez-
vous que le disque contient effectivement des
informations relatives aux sous-titres pour malentendants.
Espace de couleur
Le terme Espace de couleur désigne la gamme des
couleurs pouvant être représentée. RGB est un espace
colorimétrique basé sur le modèle de couleur RGB (soit
RVB, rouge, vert et bleu) et destiné essentiellement aux
écrans d’ordinateurs. YCbCr est un espace colorimétrique
basé sur un signal de luminance (Y) et sur deux signaux
de différenciation des couleurs (Cb et Cr).
Deep Color
Deep Color fait référence aux différentes profondeurs de
couleurs utilisées pour l’affichage, limitées à 24 bits dans
les versions précédentes de la norme HDMI.
L’augmentation de la profondeur de couleurs permet aux
appareils haute définition (HDTV) et autres systèmes
d’affichage de simuler non plus des millions de couleurs,
mais des milliards de couleurs et d’éliminer ainsi le
phénomène de stries (color banding). Vous obtenez ainsi
des dégradés plus subtils et des transitions encore plus
douces entre les couleurs. Le taux de contraste plus élevé
permet, en outre, de représenter un plus grand nombre de
nuances de gris entre le noir et le blanc. La technologie
Deep Color a également pour effet d’augmenter le
nombre de couleurs disponibles dans le cadre de l’espace
colorimétrique RGB ou YCbCr.
DLNA
DLNA (Digital Living Network Alliance) permet de
partager facilement des données multimédia numériques
par l’intermédiaire d’un réseau domestique. Vous
pouvez, en outre, diffuser sur votre téléviseur le contenu
numérique provenant d’un ordinateur (sur lequel vous
avez installé le logiciel serveur DLNA) ou de tout autre
appareil compatible DLNA via ce lecteur. Pour relier ce
lecteur à votre serveur DLNA, il est nécessaire
d’effectuer certains réglages au niveau du serveur
DLNA ou de l’appareil utilisé. Pour en savoir plus,
reportez-vous à la documentation de votre logiciel
serveur DLNA ou de l’appareil DLNA.
DivX®
DivX® est un format vidéo numérique créé par DivX,
LLC, une filiale de Rovi Corporation. Ce lecteur est un
appareil DivX Certified® original qui permet de lire de
la vidéo DivX. Visitez le site www.divix.com pour
obtenir des informations supplémentaires et des
utilitaires de conversion vous permettant de convertir
vos fichiers au format vidéo DivX.
Dolby Digital
Un système sonore développé par Dolby Laboratories
Inc. recréant l’ambiance d’une salle de cinéma sur la
sortie audio lorsque l’appareil est raccordé à un
processeur ou à un amplificateur Dolby Digital.
Dolby Digital Plus
Un système sonore développé comme extension du
Dolby Digital. Cette technologie de codage audio prend
en charge le son surround 7.1 multicanaux.
Dolby TrueHD
Le Dolby TrueHD consiste en une technologie de
codage sans perte prenant en charge jusqu’à 8 canaux de
son surround multicanaux pour les disques optiques de
dernière génération. Le son restitué est fidèle à la source
d’origine bit par bit.
DRC (Dynamic Range Control)
La fonction DRC permet d’ajuster la plage entre les
niveaux sonores minimal et maximal (plage dynamique)
pour une lecture à volume moyen. Elle est très pratique
pour écouter plus distinctement un dialogue ou pour
éviter de déranger les voisins.
DTS
Il s’agit d’un système sonore numérique mis au point
par DTS, Inc. et utilisé dans les cinémas.
DTS-HD High Resolution Audio
DTS-HD High Resolution Audio est une nouvelle
technologie mise au point pour le format de disque
optique haute définition de la dernière génération.
DTS-HD Master Audio
DTS-HD Master Audio est une technologie de
compression audio sans perte, mise au point pour le
format de disque optique haute définition de la dernière
génération.
Glossaire
42 Fr
Glossaire
FLAC
FLAC (Free Lossless Audio Codec) est un format de
fichier libre permettant la compression de données audio
sans perte. Bien que son taux de compression soit
inférieur à ceux d’autres format de compression audio à
perte, il fournit souvent un qualité audio supérieure.
HDMI
HDMI (High-Definition Multimedia Interface) est une
interface multimédia haute définition prenant en charge
les signaux vidéo et audio sur une seule connexion
numérique. La connexion HDMI assure le transport des
signaux vidéo standard haute définition et des signaux
audio multicanaux vers des appareils audiovisuels,
comme des téléviseurs équipés HDMI, sous une forme
numérique sans dégradation.
Letterbox (LB 4:3)
Format d’écran avec des bandes noires en haut et en bas
de l’image permettant de regarder un contenu grand
écran (16:9) sur un téléviseur 4:3 raccordé.
Son PCM linéaire
Le PCM linéaire est un format d’enregistrement des
signaux utilisé pour les CD audio et certains disques
DVD et Blu-ray. Le son sur un CD audio est enregistré à
une fréquence d’échantillonnage de 44,1 kHz sur 16
bits. (Alors qu’il est enregistré entre 48 kHz sur 16 bits
et 96 kHz sur 24 bits sur des disques DVD et entre 48
kHz sur 16 bits et 192 kHz sur 24 bits sur des disques
Blu-ray).
Adresse Mac
L’adresse Mac est une valeur unique attribuée à un
périphérique réseau à des fins d’identification.
Pan Scan (PS 4:3)
Format d’écran ayant pour effet de couper les côtés de
l’image pour regarder les contenus grand écran (16:9)
sur un téléviseur 4:3 raccordé.
Sous-titres
Il s’agit des lignes de texte apparaissant au bas de
l’écran traduisant ou transcrivant les dialogues. Ils sont
enregistrés sur de nombreux disques DVD et Blu-ray.
x.v.Color
x.v.Color reproduit une plus grande plage de couleurs
qu’auparavant en affichant pratiquement toutes les
couleurs que l’œil humain peut détecter.
43 Fr
Informations complémentaires
5
Français
Généralités
Alimentation
[Modèles pour le R.-U., l’Europe, la Russie et l’Australie]
................................................................................CA 110–240 V, 50 Hz
[Modèles pour l’Asie, l’Amérique centrale et du Sud]
...........................................................................CA 110–240 V, 50/60 Hz
[Autres modèles] ....................................................CA 110–240 V, 60 Hz
Consommation électrique..................................................................... 17 W
Consommation électrique en veille
Contrôle HDMI Non, Veille Réseau Non ..............................0,2 W (type)
Contrôle HDMI Oui, Veille Réseau Non...............................0,3 W (type)
Contrôle HDMI Non, Veille Réseau Oui...............................5,5 W (type)
Contrôle HDMI Oui, Veille Réseau Oui................................5,5 W (type)
Dimensions (L × H × P, éléments saillants inclus) ....... 435 × 86 × 257 mm
Poids .................................................................................................... 2,7 kg
Performances audio
Niveau de sortie audio (1 kHz, 0 dB)
Disques Blu-ray/DVD/CD-DA ...................................................2 ± 0,3 V
Rapport signal/bruit
Disques Blu-ray/DVD/CD-DA ...................................................... 115 dB
Gamme dynamique
Disques Blu-ray/DVD.................................................................... 105 dB
CD-DA ........................................................................................... 100 dB
Distorsion harmonique (1 KHz)
Disques Blu-ray/DVD/CD-DA ......................................................0,003%
Réponse en fréquence
Disques Blu-ray/DVD
.............................. 4 Hz à 22 kHz (48 kHz, fréquence d’échantillonnage)
4 Hz à 44 kHz (96 kHz, fréquence d’échantillonnage)
CD-DA ................................................................................4 Hz à 20 kHz
Entrée/Sortie
Sortie HDMI.........................................................Connecteur de type A × 1
480i/576i/480p/576p/720p/1080i/1080p/1080p@24Hz,
Deep Color, x.v. Prise en charge de
Sortie numérique ................................................. Optique × 1, Coaxiale × 1
Sortie audio analogique ............................................ Mixée en 2 canaux × 1
USB ......................................................................Connecteur de type A × 2
Réseau LAN sans fil.........................................Norme : IEEE 802.11 b/g/n
Gamme de fréquence : bande 2,4 GHz
Autre connecteur ..........................................................Remote IN/OUT × 1
Ethernet × 1
Les caractéristiques techniques sont susceptibles d’être modifiées sans
préavis.
Droits d’auteur
Le support audio-visuel peut être composé d’œuvres
soumises à des droits d’auteur qui ne peuvent être
enregistrées sans l’autorisation du détenteur du droit
d’auteur. Consultez les lois applicables dans votre
pays.
« Blu-ray Disc™ », « Blu-ray™ », « Blu-ray 3D™ »,
« BD-Live™ », « BONUSVIEW™ » et les logos sont des
marques commerciales de la Blu-ray Disc Association.
est une marque commerciale de DVD Format/Logo
Licensing Corporation.
Fabriqué sous licence de Dolby Laboratories. Dolby et le
symbole double D sont des marques commerciales de
Dolby Laboratories.
Fabriqué sous licence sous les numéros de brevets
américains : 5,956,674 ; 5,974,380 ; 6,226,616 ; 6,487,535
; 7,212,872 ; 7,333,929 ; 7,392,195 ; 7,272,567 et autres
brevets américains et mondiaux délivrés et en instance.
DTS-HD, le symbole DTS-HD et le symbole associé sont
des marques déposées et DTS-HD Master Audio une
marque commerciale de DTS, Inc.
Le produit inclut le logiciel. © DTS, Inc. Tous droits
réservés.
« HDMI », le logo « HDMI » et « High-Definition
Multimedia Interface » sont des marques commerciales ou
déposées de HDMI Licensing LLC aux États-Unis et dans
d’autres pays.
x.v.Color™
« x.v.Color » et le logo « x.v.Color » sont des marques
commerciales de Sony Corporation.
« AVCHD » et le logo « AVCHD » sont des marques
commerciales de Panasonic Corporation et Sony
Corporation.
Caractéristiques techniques
Remarque
Suite à la page suivante. \
44 Fr
Caractéristiques techniques
Java est une marque déposée d’Oracle et/ou de ses filiales.
DLNA™ et DLNA CERTIFIED™ sont des marques
commerciales ou des marques déposées de Digital Living
Network Alliance. Tous droits réservés. Toute utilisation
illicite est strictement interdite.
Le logo Wi-Fi CERTIFIED est une marque de
certification de Wi-Fi Alliance.
La marque d’identification Wi-Fi Protected Setup est une
marque de Wi-Fi Alliance.
« Wi-Fi », « Wi-Fi Protected Setu, «Wi-Fi Direc et
« Miracast » sont des marques ou des marques déposées
de Wi-Fi Alliance.
Ce produit est utilisé sous licence en vertu de la licence
des portefeuilles de brevets AVC et VC-1 pour
l’utilisation à des fins personnelles et non commerciales
qui accorde le droit au consommateur de (i) coder de la
vidéo conformément aux normes AVC et VC-1 (« vidéo
AVC/VC-1 ») et/ou (ii) décoder de la vidéo AVC/VC-1
codée par un consommateur à des fins personnelles et non
commerciales et/ou obtenue d’un fournisseur autorisé à
fournir de la vidéo AVC/VC-1. Aucune licence n’est
accordée ou ne sera considérée comme allouée pour toute
autre utilisation. De plus amples informations sont
disponibles auprès de MPEG LA, LLC. Visitez http://
www.mpegla.com.
Ce produit est utilisé sous licence en vertu de la licence
des portefeuilles de brevets MVC pour l’utilisation à des
fins personnelles et non commerciales qui accorde le droit
au consommateur de (i) coder de la vidéo conformément à
la norme MVC (« vidéo MVC ») et/ou (ii) décoder de la
vidéo MVC codée par un consommateur à des fins
personnelles et non commerciales et/ou obtenue d’un
fournisseur autorisé à fournir de la vidéo MVC. Aucune
licence n’est accordée ou ne sera considérée comme
allouée pour toute autre utilisation. De plus amples
informations sont disponibles auprès de MPEG LA, LLC.
Visitez http://www.mpegla.com.
Windows Media Player est une marque déposée ou une
marque commerciale de Microsoft corporation aux États-
Unis et/ou dans d’autres pays.
Copyright 2004-2012 Verance Corporation. Cinavia® est
une marque commerciale de Verance Corporation.
Protégée par le brevet américain numéro 7,369,677 et par
d’autres brevets mondiaux délivrés et en attente sous
licence de Verance Corporation. Tous droits réservés.
DivX®, DivX Certified®, DivX Plus® HD et les logos
associés sont des marques déposées de Rovi Corporation
ou de ses filiales et sont concédées sous licence.
DivX Certified® pour lire des vidéos DivX® et DivX
Plus® HD (H.264/.MKV) jusqu’à 1080p incluant du
contenu supplémentaire.
À PROPOS DE LA VIDÉO : DivX® est un format vidéo
numérique créé par DivX, LLC, une filiale de Rovi
Corporation. Ce lecteur est un appareil DivX Certified®
original qui a fait l’objet de contrôles rigoureux de
compatibilité pour la lecture de vidéo DivX. Visitez le site
www.divix.com pour obtenir des informations
supplémentaires et des utilitaires de conversion vous
permettant de convertir vos fichiers au format vidéo DivX.
À PROPOS DE LA VIDÉO À LA DEMANDE : Cet
appareil DivX Certified® doit être enregistré pour pouvoir
lire du contenu DivX Video-on-Demand (VOD). Pour
générer le code d’enregistrement, repérez la section DivX
VOD dans le menu de configuration (SETUP) de l’appareil.
Visitez le site www.divix.com pour savoir comment
effectuer l’enregistrement.
45 Fr
Informations complémentaires
5
Français
INFORMATIONS COMPLÉMENTAIRES
Numéros
2ND AUDIO, télécommande ................9
3D Message de la Réécoute,
menu SETUP ..................................30
A
A/B, télécommande ...............................9
Affichage à l’écran, menu SETUP ......30
Albums photo en ligne Picasa ..............21
Angle, menu à l’écran ..........................23
ANGLE, télécommande .........................9
Audio, formats de sortie .......................35
Audio, menu à l’écran ..........................23
Audio, menu SETUP ...........................30
AUDIO, télécommande .........................9
Autres raccordements ..........................17
AV CONTROLLER ............................22
B
BD-Live ...............................................26
Bitrate, menu à l’écran .........................23
C
Chapitre, menu à l’écran ......................23
CLEAR, télécommande .........................8
Coaxial / Optique, menu SETUP .........34
Code page, menu à l’écran ...................23
Code pays, menu SETUP .....................31
Configuration de Connexion,
menu SETUP ...................................31
Configuration Haut-Parleur,
menu SETUP ...................................34
Configuration IP, menu SETUP ..........32
Connection BD-Live, menu SETUP ....32
Contrôle HDMI, fonction ....................30
Contrôle HDMI, menu SETUP ............30
Contrôle Parental, menu SETUP .........31
Contrôle, touches de télécommande ......9
Couleur, touches de télécommande .......8
Curseur, touches de télécommande .......9
D
Dernière Mémoire, menu SETUP ........31
Désentrelacement vidéo, menu SETUP ...
33
Deuxième Audio, menu à l’écran ........23
Deuxième Marque Audio,
menu SETUP ...................................31
Deuxième Vidéo, menu à l’écran ........23
Diaporama, menu à l’écran ..................23
Digital Media Controller (DMC) .........15
DivX(R) VOD DRM, menu SETUP ...31
DLNA ..................................................15
Données disques, lecture ......................19
DRC, menu SETUP .............................34
Dropbox ...............................................21
E
Échantillonnage Inférieur,
menu SETUP ...................................34
Écran TV, menu SETUP ......................32
ENTER, télécommande .........................9
Espace de couleur, menu SETUP ........33
Espace de stockage externe,
menu SETUP ...................................30
État, menu ............................................24
F
Fonction incrustation ............................26
H
HDMI 1080p 24Hz, menu SETUP ......33
HDMI Deep Color, menu SETUP .......33
HDMI, menu SETUP ...........................34
Heure, menu à l’écran ..........................23
HOME, télécommande ...........................9
I
Information de Mise à jour ...................30
Information, menu SETUP ...................31
Insérer les paramètres par défaut,
menu SETUP ...................................30
Installation Facile, menu SETUP .........30
L
Langue, menu SETUP ..........................30
Lecture automatique du disque,
menu SETUP ...................................31
M
Marque Angle, menu SETUP ..............31
Marque PIP, menu SETUP ..................31
Menu à l’écran ......................................23
Menu, menu SETUP ............................30
Mettre à niveau, menu SETUP .............30
Miracast ................................................22
Mise à niveau du logiciel .....................37
Mise à niveau logicielle .......................37
Mixage en 2 canaux stéréo,
menu SETUP ...................................34
Mode/Modèle de lecture,
menu à l’écran ..................................23
Modification du mot de passe,
menu SETUP ...................................31
N
Numérique, touches de télécommande ..8
O
ON SCREEN, télécommande ................9
P
Paramètres audio, menu SETUP ..........34
Paramètres Proxy, menu SETUP .........32
Paramètres vidéo, menu SETUP ..........32
PBC (Push Button Configuration) .......31
Pilotage réseau, menu SETUP .............32
PIN, code (WPS) ..................................31
PIP, télécommande .................................8
Plage/fichier, menu à l’écran ................23
Playback, menu SETUP .......................31
POP UP/MENU, télécommande ............9
Post process, menu SETUP ..................34
Processus Vidéo, menu SETUP ...........33
PROGRAM, télécommande ...................8
Programmation de l’ordre de lecture ....25
R
Recherche instantanée,
menu à l’écran ................................. 23
Recherche, fonction ............................. 25
Réduction de bruit, menu SETUP ....... 33
Réglages généraux, menu SETUP ....... 30
Relecture instantanée,
menu à l’écran ................................. 23
REPEAT, télécommande ....................... 8
Réseau, menu SETUP ......................... 31
RETURN, télécommande ...................... 9
S
SEARCH, télécommande ...................... 9
Sécurité, menu SETUP ........................ 31
SETUP, menu ...................................... 27
SETUP, télécommande .......................... 9
SETUP, utilisation du menu ................ 29
SHUFFLE, télécommande .................... 8
Sortie 3D, menu SETUP ...................... 32
Sortie audio, menu SETUP .................. 34
Sortie SACD, menu SETUP ................ 34
Sous-titres pour malentendants,
menu SETUP ................................... 33
Sous-titres, menu à l’écran .................. 23
Sous-titres, menu SETUP .................... 31
STATUS, télécommande ....................... 9
Style de Sous-titres, menu à l’écran .... 23
SUBTITLE, télécommande ................... 9
Système d’information,
menu SETUP ................................... 34
Système TV, menu SETUP ................. 33
Système, menu SETUP ....................... 30
T
Télécommande ...................................... 8
Test de connexion, menu SETUP ........ 32
Titre, menu à l’écran ............................ 23
TOP MENU, télécommande ................. 9
Transitions, menu à l’écran ................. 23
TV, menu SETUP ................................ 32
U
UpMix, menu SETUP ......................... 34
USB contenu, lecture ........................... 19
V
Veille Automatique, menu SETUP ..... 30
Vidéo, formats de sortie ...................... 36
W
WPS (Wi-Fi Protected Setup) ............. 31
Y
YouTube .............................................. 21
Z
ZOOM, télécommande .......................... 8
Index
Vorsicht-i De
1 Um optimales Leistungsvermögen sicherzustellen, lesen Sie
bitte die Anleitung aufmerksam durch. Bewahren Sie die
Anleitung danach für spätere Nachschlagzwecke sorgfältig
auf.
2 Installieren Sie dieses Gerät an einem gut belüfteten,
trockenen, sauberen Ort - entfernt von direktem Sonnenlicht,
Wärmequellen, Erschütterungen, Staub, Feuchtigkeit und
Kälte. Für eine sachgemäße Belüftung sollten folgende
Mindestabstände gewährleistet sein.
Oben: 10 cm
Hinten: 10 cm
Seiten: 10 cm
3 Stellen Sie dieses Gerät entfernt von anderen elektrischen
Haushaltgeräten, Motoren oder Transformatoren auf, um
Brummgeräusche zu vermeiden.
4 Setzen Sie dieses Gerät keinen plötzlichen
Temperaturänderungen von kalt auf warm aus, und stellen
Sie dieses Gerät nicht an Orten mit hoher Luftfeuchtigkeit auf
(z.B. in Räumen mit Luftbefeuchtern), um Kondensation im
Inneren des Gerätes zu vermeiden, da es anderenfalls zu
elektrischen Schlägen, Feuer, Beschädigung dieses Gerätes
und/oder zu persönlichen Verletzungen kommen kann.
5 Vermeiden Sie die Aufstellung dieses Gerätes an Orten, an
welchen Fremdkörper in das Gerät fallen können bzw. an
welchen Flüssigkeiten auf das Gerät verschüttet werden
können. Stellen Sie auf der Oberseite des Gerätes niemals
Folgendes auf:
Andere Komponenten, da diese Beschädigung und/
oder Verfärbung der Oberfläche dieses Gerätes
verursachen können.
Brennende Objekte (z.B. Kerzen), da diese Feuer,
Beschädigung des Gerätes und/oder persönliche
Verletzungen verursachen können.
Mit Flüssigkeiten gefüllte Behälter, da diese umfallen
und die Flüssigkeit auf das Gerät verschütten können,
wodurch es zu elektrischen Schlägen für den
Anwender und/oder zu Beschädigung des Gerätes
kommen kann.
6 Decken Sie dieses Gerät niemals mit Zeitungen, Tischdecken,
Vorhängen usw. ab, damit die Wärmeabfuhr nicht behindert
wird. Falls die Temperatur im Inneren des Gerätes ansteigt,
kann es zu Feuer, Beschädigung des Gerätes und/oder zu
persönlichen Verletzungen kommen.
7 Schließen Sie dieses Gerät erst an eine Wandsteckdose an,
nachdem alle anderen Anschlüsse ausgeführt wurden.
8 Stellen Sie dieses Gerät niemals mit der Unterseite nach oben
auf, da es sonst beim Betrieb zu Überhitzung mit möglichen
Beschädigungen kommen kann.
9 Wenden Sie niemals Gewalt bei der Bedienung der Schalter,
Knöpfe und/oder Kabel an.
10 Wenn Sie das Netzkabel von der Wandsteckdose abtrennen,
fassen Sie immer den Netzstecker an; ziehen Sie niemals an
dem Kabel.
11 Reinigen Sie dieses Gerät niemals mit chemisch behandelten
Tüchern; anderenfalls kann das Finish beschädigt werden.
Verwenden Sie ein reines, trockenes Tuch.
12 Verwenden Sie nur die für dieses Gerät vorgeschriebene
Netzspannung. Falls Sie eine höhere als die vorgeschriebene
Netzspannung verwenden, kann es zu Feuer, Beschädigung
dieses Gerätes und/oder zu persönlichen Verletzungen
kommen. Yamaha kann nicht verantwortlich gemacht werden
für Schäden, die auf die Verwendung dieses Gerätes mit einer
anderen als der vorgeschriebenen Spannung zurückzuführen
sind.
13 Um Beschädigungen durch Blitzschlag zu vermeiden, ziehen
Sie den Netzstecker von der Netzdose ab, wenn es ein
Gewitter gibt.
14 Versuchen Sie niemals ein Modifizieren oder Ändern dieses
Gerätes. Falls eine Wartung erforderlich ist, wenden Sie sich
bitte an einen Yamaha-Kundendienst. Das Gehäuse sollte
niemals selbst geöffnet werden.
15 Falls Sie das Gerät für längere Zeit nicht verwenden (z.B.
während der Ferien), ziehen Sie den Netzstecker von der
Netzdose ab.
16 Lesen Sie unbedingt den Abschnitt „Fehlersuche“ durch, um
übliche Bedienungsfehler zu berichtigen, bevor Sie auf eine
Störung des Gerätes schließen.
17 Bevor Sie dieses Gerät an einen anderen Ort transportieren,
drücken Sie die Netztaste p, um das Gerät auf den
Bereitschaftsmodus zu schalten, und ziehen Sie danach den
Netzstecker von der Netzdose ab.
18 Es kommt zu Kondensatbildung, wenn die
Umgebungstemperatur plötzlich ändert. Ziehen Sie den
Netzstecker von der Netzdose ab, und lassen Sie das Gerät
ruhen.
19 Falls Sie das Gerät für längere Zeit in Betrieb halten, kann
sich das Gerät erwärmen. Schalten Sie die Stromversorgung
aus, und lassen Sie danach das Gerät abkühlen.
20 Stellen Sie dieses Gerät in die Nähe der Steckdose und so auf,
dass der Netzstecker gut zugänglich ist.
21 Die Batterien dürfen nicht starker Hitze wie direktem
Sonnenschein, Feuer o.ä. ausgesetzt werden.
VORSICHT MIT DEM LASER
Dieses Gerät enthält einen Laser. Um unnötige
Augenverletzungen zu vermeiden, sollten Sie alle
Wartungs- und Reparaturarbeiten einem qualifiziertem
Wartungstechniker überlassen.
GEFAHR
Sichtbare Laserstrahlen bei geöffneter Abdeckung.
Achten Sie darauf, nicht direkt in den Laserstrahl zu
blicken. Wenn dieses Gerät an eine Netzdose
angeschlossen ist, blicken Sie niemals in die Öffnung der
Disc-Schublade oder in andere Öffnungen.
Vorsicht: Vor der Bedienung dieses Geräts durchlesen.
Verwenden Sie dieses Gerät nicht weniger als 22 cm
entfernt von Personen mit einem Herzschrittmacher
oder einem implantierten Defibrillator.
Funkwellen können die Funktion medizinische Geräte
beeinträchtigen. Bedienen Sie dieses Gerät nicht in der
Nähe medizinischer Geräte oder innerhalb von
medizinischen Einrichtungen.
Dieses Gerät ist nicht vom Netz abgetrennt, so lange der
Netzstecker an eine Netzdose angeschlossen ist, auch
wenn das Gerät selbst ausgeschaltet wurde mit p.
Dieser Status wird als Bereitschaftsmodus bezeichnet.
Auch in diesem Status weist das Gerät einen geringen
Stromverbrauch auf.
Wenn der Netzstecker oder Gerätestecker als
Trennvorrichtung verwendet wird, sollte dieser stets
bedienbar sein.
WARNUNG
UM DIE GEFAHR EINES FEUERS ODER EINES
ELEKTROSCHOCKS ZU VERMEIDEN, DARF DAS
GERÄT WEDER REGEN NOCH FEUCHTIGKEIT
AUSGESETZT WERDEN.
1 De
1
2
3
4
5
Deutsch
Verwendungszweck des Players ...................... 2
Vielzahl unterstützter Discs und Dateiformate............... 2
Erweiterte Netzwerkfunktionen...................................... 2
Einfache Einrichtung und Bedienung............................. 2
Lieferumfang ...................................................... 2
Info zu Discs und Dateien ................................. 3
Mit diesem Player kompatible Discs/Dateien ................ 3
Disc einlegen .................................................................. 4
Vorsichtsmaßnahmen für Discs...................................... 5
Hinweise zum Betrachten von 3D-Videobildern............ 5
Cinavia-Technologie ...................................................... 5
Bedienungselemente und deren Funktionen... 6
Vorderseite...................................................................... 6
Rückseite ........................................................................ 7
Fernbedienung ................................................................ 8
Video-/Audio-Verbindungen............................ 11
TV-Verbindung über einen AV-Receiver .................... 12
Direkte TV-Verbindung ............................................... 12
TV- und Audiogerät-Verbindung ................................. 13
Netzwerkanbindung ......................................... 14
Drahtlosverbindung ...................................................... 14
Kabelverbindung .......................................................... 14
DLNA-Server-Einrichtung ........................................... 15
USB-Verbindung .............................................. 16
Weitere Verbindungen ..................................... 17
Verbindung mit den REMOTE CONTROL-Buchsen
.... 17
Netzkabel anschließen .................................................. 17
Grundeinstellungen ......................................... 18
Einstellung über Einfaches Konfigurationsmenü ......... 18
Einstellung der Drahtlosverbindung............................. 18
HOME-Menü...................................................... 19
Wiedergabe von Foto/Musik/Video ............................. 19
Verwenden von Netzwerkdiensten ................. 21
Informationen über Dropbox™ .................................... 21
Informationen über Picasa™-Webalben....................... 21
Informationen über YouTube™ ................................... 21
Smartphone-Bilder und -Videos auf dem
TV Bildschirm betrachten (Miracast™) ...... 22
Bedienung des Players über Mobilgeräte
(AV CONTROLLER) ...................................... 22
Erweiterte Wiedergabebedienung .................. 23
Bildschirmmenü............................................................ 23
Status-Menü.................................................................. 24
Programmwiedergabe................................................... 25
Verwenden der Suche .................................................. 25
BONUSVIEW™ und BD-Live™ benutzen................. 25
Verwenden der Funktion Bild im Bild
(Zweitbild/Zweitton-Wiedergabe) ........................... 26
Verwendung der BD-Live™-Funktion......................... 26
SETUP-Menü..................................................... 27
Beispiel für die Bedienung des SETUP-Menüs ........... 29
Allgemeine Einstellungen............................................. 30
Anzeige Einstellung...................................................... 32
Audio-Einstellungen..................................................... 34
Systeminformation........................................................ 34
Übersicht der Audioausgangsformate .......................... 35
Informationen über HDMI-Videoausgangsformate ..... 36
Software-Aktualisierung.................................. 37
Aktualisierung der Software......................................... 37
Fehlersuche ...................................................... 38
Strom............................................................................. 38
Grundlegende Bedienung.............................................. 38
Disc-Wiedergabe........................................................... 38
Bild................................................................................ 39
Ton ................................................................................ 39
Netzwerk ....................................................................... 39
Meldungen auf dem Bildschirm.................................... 40
Glossar .............................................................. 41
Technische Daten............................................. 43
Allgemeines .................................................................. 43
Audioleistung ................................................................ 43
Eingänge/Ausgänge ...................................................... 43
Urheberrecht.................................................................. 43
Index .................................................................. 45
(am Ende der Anleitung)
Informationen über die Anleitung
Die in der Anleitung beschriebene Bedienung des
Players beruht nach Möglichkeit immer auf den
Einsatz der Fernbedienung. Gewisse dieser
Bedienungen sind ebenfalls über die Bedienelemente
an der Vorderseite möglich.
Hinweise enthalten wichtige Information über
Sicherheit und Bedienung. Tipps enthalten
Ratschläge zur Bedienung.
Die Anleitung ging vor der Produktion in Druck.
Änderungen der Konstruktion und technischen
Daten zum Zweck der Produktverbesserung sind
vorbehalten. Bei Unterschieden zwischen der
Anleitung und dem Produkt hat das Produkt
Vorrang.
In dieser Bedienungsanleitung
verwendete Symbole
Bestimmte Bedienelemente und Funktionen sind durch
Symbole des entsprechenden Formats gekennzeichnet.
Für Einzelheiten zu den abspielbaren Discs und Formaten
siehe Seite 3.
: BD-Video
: DVD-Video, DVD-VR, DVD+VR
: Audio-CD, Super-Audio-CD
: Videodateien
: Audiodateien
: Bilddateien
Inhalt
1. Einleitung
2. Verbindungen
3. Wiedergabe
4. Einstellungen
5. Zusätzliche Informationen
Information about third party software licenses...i
Neue Software mit zusätzlichen Merkmalen oder
Produktverbesserungen erscheint nach Bedarf. Wir
empfehlen die Software des Players regelmäßig zu
aktualisieren. Weitere Einzelheiten finden Sie unter
„Software-Aktualisierung“ (S. 37).
BD
DVD
CD
VIDEO
MUSIC
PHOTO
2 De
EINLEITUNG
Vielzahl unterstützter Discs und Dateiformate
Blu-ray Disc™, DVD, SA-CD und CD (S. 23)
Blu-ray 3D™ (S. 11), BONUSVIEW™ und BD-Live™ (S. 25)
Video-, Musik- und Bilddateien auf DVD-R/RW-Discs, CD-R/RW-Discs und USB-Speichergeräte (S. 19)
Erweiterte Netzwerkfunktionen
Wiedergabe von DLNA-Server (PC oder NAS)-Inhalten (S. 19)
Streaming-Wiedergabe von Netzwerkdienstinhalten (S. 21)
Bedienung des Players über Mobilgeräte (AV CONTROLLER) im Netzwerk (S. 22)
Smartphone-Bilder und -Videos auf dem TV Bildschirm betrachten (Miracast™) (S. 22)
Einfache Einrichtung und Bedienung
Schnelle und einfache Grundeinstellung (S. 18)
Automatisches Einrichten der drahtlosen Netzwerkverbindung mit WPS (Wi-Fi Protected Setup) (S. 18)
Software-Aktualisierung über Netzwerk oder USB (S. 37)
Sequenzielle Bedienung des TVs, AV-Receivers und Players (HDMI-Steuerung) (S. 30)
Bitte vergewissern Sie sich, dass dem Gerät das folgende Zubehör beiliegt.
Verwendungszweck des Players
Lieferumfang
5#%&
5#%&
USB-Inhalte
Drahtloses Netzwerk
(WPS-kompatibel)
Verschiedene Discs
Smartphone-Inhalte (Miracast)
Netzwerk-Streaming-
Inhalte
PC-/NAS-Inhalte
(DLNA)
Batterien (×2)
(AAA, R03, UM-4)
Fernbedienung Netzkabel
3 De
Einleitung
1
Deutsch
Mit diesem Player kompatible
Discs/Dateien
Mit diesem Player können 12-cm- und 8-cm-Discs
wiedergegeben werden. Verwenden Sie keinen 8-
cm-auf-12-cm-Adapter.
Verwenden Sie Discs, die mit den nachstehend
angegebenen Normen kompatibel sind, was durch
die Kennzeichnung mit den offiziellen Logos auf der
Disc angegeben ist. Die Wiedergabe von Discs, die
nicht diesen Normen entsprechen, kann nicht
garantiert werden. Darüber hinaus kann keine
einwandfreie Bild- oder Tonqualität garantiert
werden, selbst wenn die Discs abspielbar sind.
* Der Player unterstützt FAT 16/32- oder NTFS-
formatierte USB -Speichergeräte.
*1 Abtastfrequenz von 32–48 kHz (Stereo) und Bitrate
von 8–320 kbps
*2 Abtastfrequenz von 32–48 kHz (Stereo) und Bitrate
von 32–192 kbps
*3 Abtastfrequenz von bis zu 192 kHz/24 Bit (LPCM/
Stereo)
*4 WMV9 (maximale Auflösung: 1920 x 1080)
Abhängig vom Verfahren der Dateierstellung oder
den verwendeten Codecs kann die Wiedergabe einer
Datei, die in der Übersicht oben aufgeführt ist, nicht
garantiert werden.
Es kann nicht garantiert werden, dass alle Dateien
auf einer Disc, einem USB-Speichergerät und im
Netzwerk wiedergegeben werden können.
Eine urheberrechtlich geschützte Datei kann nicht
wiedergegeben werden.
Bei der Verwendung von DLNA muss eine Datei die
DLNA-Serveranforderungen erfüllen.
Informationen über die Regionalcodes
für Blu-ray Disc-/DVD-Videos
Blu-ray Disc-/DVD-Video-Player und -Discs weisen
Regionalcodes auf, welche die Regionen
vorschreiben, in denen eine Disc abgespielt werden
kann. Überprüfen Sie die Kennzeichnung für den
Regionalcode auf der Rückseite des Players.
Eine Blu-ray-Disc kann auf dem Player abgespielt
werden, wenn sie denselben Regionalcode oder den
Regionalcode „ABC“ aufweist.
Eine Blu-ray-Disc kann auf dem Player abgespielt
werden, wenn sie denselben Regionalcode oder den
Regionalcode „ALL“ aufweist.
Info zu Discs und Dateien
Medientyp Datenträger-Format
BD-ROM/BD-R/
BD-RE
BD-Video/Datendateien
DVD-ROM DVD-Video
DVD-R/DVD-R
DL/DVD-RW
DVD-Video/DVD-VR/AVCHD/
Datendateien
DVD+R/DVD+R
DL/DVD+RW
DVD-Video/DVD+VR/AVCHD/
Datendateien
CD-ROM CDDA/HDCD
CD-RW/CD-R CDDA/Datendateien
SA-CD SA-CD
USB* Datendateien
DLNA Datendateien
Abspielbare
Audiodateiformate
Abspielbare
Videodateiformate
Abspielbare
Fotodateiformate
MP3 (.mp3)
*1
WMA (.wma)
*2
AAC (.aac/.m4a)
WAV (.wav)
*3
FLAC (.flac)
*3
ALAC (.m4a)
*3
DivX (.divx)
MKV im DivX-
Format (.mkv)
MKV im H.264-
Format (.mkv)
MPEG PS (.mpeg/
.mpg)
MPEG TS (.ts)
MPEG-4 (.mp4)
VOB (.vob)
AVI (.avi)
ASF (.asf)
WMV (.wmv)
*4
JPEG (.jpeg/.jpg)
GIF (.gif)
PNG (.png)
MUSIC
PHOTO
Hinweise
Informationen über Regionalcodes
Bestimmungsort BD-Video DVD-Video
U.S.A. und Kanada Regionalcode „A“
oder „ABC“
Regionalcode „1“
oder „ALL“
Europa Regionalcode „B“
oder „ABC“
Regionalcode „2“
oder „ALL“
Asien, Taiwan und
Korea
Regionalcode „A“
oder „ABC“
Regionalcode „3“
oder „ALL“
Mittel- und
Südamerika
Regionalcode „A“
oder „ABC“
Regionalcode „4“
oder „ALL“
1
ALL
2
ALL
3
ALL
4
ALL
4 De
Info zu Discs und Dateien
Blu-ray Disc-/DVD-Video-Bedienung und -
Funktionen können von den Erläuterungen in dieser
Anleitung abweichen und manche Bedienfunktionen
können aufgrund von Einstellungen des Disc-
Herstellers gesperrt sein.
Falls ein Menü oder Bedienungsanweisungen
während der Wiedergabe einer Disc angezeigt
werden, folgen Sie bitte dem angezeigten
Bedienungsverfahren.
Einige der Discs können in Abhängigkeit von der
Disc u.U. nicht abgespielt werden.
Finalisieren Sie beim Brennen alle Datenträger, die
mit diesem Player wiedergegeben werden sollen.
Finalisieren“ weist hier auf die Bearbeitung einer
bespielten Disc durch ein Aufnahmegerät hin, sodass
diese auf Playern/Rekordern einschließlich diesem
Player abgespielt werden kann. Mit diesem Player
können nur finalisierte Discs wiedergegeben
werden. (Dieser Player besitzt keine Funktion zum
Finalisieren von Discs.)
Informationen über Super-Audio-CD
(SA-CD)
Dies ist ein Audioformat, das auf den aktuellen CD-
Standards basiert, aber deutlich mehr Informationen
umfasst, die eine höhere Klangqualität bieten. Es
gibt drei Discarten: Single-Layer, Dual-Layer und
Hybrid-Discs. Die Hybrid-Disc kann auf
vorhandenen CD-Playern sowie auf Super-Audio-
CD-Playern wiedergegeben werden, da sie sowohl
Standard-Audio-CD- als auch Super-Audio-CD-
Informationen enthält.
Dieses Gerät zeigt nicht die auf den Discs
enthaltenen Textdaten im Display an der Vorderseite
an.
Disc einlegen
Legen Sie die Disc mit nach oben weisender
Beschriftung ein.
Bei beidseitig bespielten Discs wenden Sie die
abzuspielende Seite nach unten.
Je nach Disc und Einstellung dieses Players startet
die Wiedergabe automatisch.
Je nach Disc wird ggf. das Menü zuerst angezeigt.
Die Ladezeit kann je nach der Disc unterschiedlich
sein.
Australien Regionalcode „B“
oder „ABC“
Regionalcode „4“
oder „ALL“
Russland Regionalcode „C“
oder „ABC“
Regionalcode „5“
oder „ALL“
Hinweise
Informationen über Regionalcodes
Bestimmungsort BD-Video DVD-Video
4
ALL
5
ALL
Hinweis
Hinweise
1
2
3
Super-Audio-CD Discarten
Single-Layer-Disc
HD-Layer
Dual-Layer-Disc
Hybrid-Layer-
Disc
HD-Layer
CD-Layer
HD-Layer
Hybrid-Super-Audio-CD-Disc
CD-Layer, der mit jedem
CD-Player abgespielt
werden kann
- DSD-Stereo in hoher Qualität
-
DSD-Mehrkanal in hoher Qualität
High-Density-Layer mit:
5 De
Info zu Discs und Dateien
Einleitung
1
Deutsch
Vorsichtsmaßnahmen für Discs
Discs vor Kratzern und Staub
schützen
Blu-ray Discs , DVDs und CDs sind empfindlich
gegen Staub, Fingerabdrücke und besonders Kratzer.
Eine verkratzte Disc ist möglicherweise nicht mehr
abspielbar. Handhaben Sie die Discs mit Sorgfalt und
bewahren Sie sie an einem sicheren Ort auf.
Korrekte Lagerung von Discs
Handhabungsvorschriften
Reinigen der Abtastlinse
Verwenden Sie auf keinen Fall handelsübliche
Reinigungsdiscs. Der Gebrauch solcher Discs kann
die Linse beschädigen.
Lassen Sie die Linse von der nächsten von Yamaha
zugelassenen Kundendienststelle reinigen.
Hinweise zum Betrachten von 3D-
Videobildern
Bei manchen Menschen können beim Betrachten von
3D-Videobildern Augenübermüdung, Erschöpfung
oder gar Unwohlsein auftreten. Wir empfehlen
deshalb allen Zuschauern, regelmäßige Pausen beim
Betrachten von 3D-Videobildern einzulegen.
Sollten Sie sich unwohl fühlen, unterbrechen oder
verlassen Sie bitte die Vorführung, bis Sie sich
wieder besser fühlen. Ziehen Sie einen Arzt zu Rate,
falls das Unwohlsein öfter auftritt oder besonders
schlimm ist.
Lesen Sie die Bedienungsanleitungen (Blu-ray Disc
und TV) aufmerksam durch und beachten Sie
eventuelle Warnmeldungen auf Ihrem TV-Bildschirm.
Die Sehkraft von Kindern (vor allem im Alter unter
sechs Jahren) befindet sich noch in der
Entwicklungsphase. Fragen Sie Ihren Arzt (z.B.
Kinder- oder Augenarzt) um Rat, bevor Sie Kindern
das Betrachten von 3D-Videobildern erlauben.
Kinder sollten das Gerät nur unter elterlicher
Überwachung benutzen und dabei unbedingt die
weiter oben gegebenen Ratschläge befolgen.
Cinavia-Technologie
Das Kopierschutzsystem im Blu-ray Disc-Player
beruht auf die Cinavia-Technologie.
Möglicherweise werden die folgenden Meldungen
angezeigt und die Wiedergabe angehalten oder die
Audioausgabe vorübergehend vom Blu-ray Disc-
Player stumm geschaltet, wenn Sie eine
unberechtigte Kopie von Inhalten wiedergeben, die
durch die Cinavia-Technologie geschützt sind.
Diese Meldungen werden nur auf Englisch angezeigt.
Cinavia-Hinweis
Dieses Produkt nutzt Cinavia-Technologie, um die
Verwendung unautorisierter Kopien einiger im Handel
erhältlicher Filme und Videos sowie ihrer Tonspuren
einzuschränken. Wenn die verbotene Nutzung einer
unautorisierten Kopie erkannt wird, wird eine Meldung
angezeigt und die Wiedergabe bzw. der Kopiervorgang
wird unterbrochen.
Ausführliche Informationen zur Cinavia-Technologie finden
Sie im Cinavia Online Consumer Information Center unter
http://www.cinavia.com. Um ergänzende Informationen
über Cinavia per Post zu erhalten, senden Sie eine Postkarte
mit Ihrer Postanschrift an: Cinavia Consumer Information
Center, P.O. Box 86851, San Diego, CA, 92138, USA.
Legen Sie die Disc in die Mitte der Disc-
Hülle und lagern Sie Hülle und Disc
senkrecht.
Vermeiden Sie die Aufbewahrung der
Disc an Orten mit direkter
Sonneneinstrahlung, in der Nähe von
Heizkörpern oder Orten mit hoher
Luftfeuchtigkeit.
Lassen Sie Discs nicht fallen und setzen
Sie sie keinen starken Vibrationen oder
Erschütterungen aus.
Vermeiden Sie die Lagerung von Discs an
sehr staubigen oder feuchten Orten.
Falls die Oberfläche verschmutzt ist,
wischen Sie sie mit einem weichen, (nur
mit Wasser) angefeuchteten Tuch
behutsam ab. Wischen Sie Discs stets
vom Mittelloch zum Rand hin ab.
Verwenden Sie keine Schallplatten-
Reinigungssprays, Benzol, Verdünner,
Antistatikflüssigkeiten oder andere
Lösungsmittel.
Vermeiden Sie eine Berührung der Oberfläche.
Bekleben Sie Discs nicht mit Papier oder
Aufklebern.
Falls die Abspielfläche einer Disc beschmutzt oder
verkratzt ist, beurteilt der Player die Disc
möglicherweise als inkompatibel und fährt die
Disclade aus oder er gibt die Disc nicht korrekt
wieder. Wischen Sie Schmutz auf der Abspielfläche
mit einem weichen Tuch ab.
Hinweis
Abspielen gestoppt. Der abzuspielende
Medieninhalt ist durch Cinavia® geschützt und
ist nicht für eine Wiedergabe auf diesem Gerät
autorisiert.
Für weitere Informationen besuchen Sie http://
www.cinavia.com. Meldungscode 1.
Tonausgabe wurde vorübergehend abgeschaltet.
Korrigieren Sie nicht die Lautstärke der
Wiedergabe. Der abzuspielende Medieninhalt ist
durch Cinavia® geschützt und ist nicht für eine
Wiedergabe auf diesem Gerät autorisiert.
Für weitere Informationen besuchen Sie http://
www.cinavia.com. Meldungscode 3.
6 De
Vorderseite
1 p (On/Standby)
Schaltet den Player ein/versetzt ihn in den
Bereitschaftsmodus.
Halten Sie p an der Vorderseite mindestens fünf
Sekunden lang gedrückt, um den Player
zurückzusetzen (System-Rücksetzung).
2 USB-Anschluss (S. 16)
3 SA-CD-Anzeige
Leuchtet, wenn eine SA-CD eingelegt ist und der SA-
CD-Layer (S. 4) ausgewählt ist.
4 Display der Vorderseite
Zeigt verschiedene Informationen über den
Betriebsstatus an.
5 Klappe der Disclade
6 (Auswerfen)
Öffnet/schließt die Disclade.
7 (Rücklauf/Suchrücklauf)
Drücken für Rücklauf und gedrückt halten für
Suchrücklauf.
8 (Vorlauf/Suchvorlauf)
Drücken für Vorlauf und gedrückt halten für
Suchvorlauf.
9 (Wiedergabe)
Startet die Wiedergabe.
0 (Pause)
Hält die Wiedergabe an.
A (Stopp)
Stoppt die Wiedergabe.
Entfernen Sie die Schutzfolie von der Vorderseite, bevor Sie den Player bedienen.
Bedienungselemente und deren Funktionen
USB
5#%&
2 5 61 43 7 8 9 0 A
Hinweis
7 De
Bedienungselemente und deren Funktionen
Einleitung
1
Deutsch
Rückseite
1 AUDIO OUT (L/R) (S. 13)
2 HDMI (S. 11)
3 DIGITAL OUT (COAXIAL/OPTICAL) (S. 13)
4 USB (S. 16)
5 NETWORK (S. 14)
6 REMOTE CONTROL (OUT/IN) (S. 17)
7 AC IN (S. 17)
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT
NETWORK
USB
HDMI
REMOTE CONTROL
OUT IN
AC IN
1 6 72 3 45
8 De
Bedienungselemente und deren Funktionen
Fernbedienung
wird in der linken oberen Ecke des Bildschirms
angezeigt, wenn die gedrückte Taste nicht verfügbar
ist.
1 Infrarotsender: Gibt ein Infrarotsignal aus. Zielen
Sie damit auf den Fernbedienungssensor (S. 10).
2 p: Schaltet den Player ein oder in den
Bereitschaftsmodus.
3 : Öffnet/schließt die Disclade.
4 Farbtasten : Verwenden Sie diese Tasten gemäß
den Anweisungen auf dem Bildschirm.
ZOOM : Vergrößert/
verkleinert. Mit jedem Drücken der Taste ändert sich
die Größe des Bildschirms (vergrößern/verkleinern: je
drei Schritte).
PROGRAM : Richtet die Reihenfolge der
Wiedergabe ein (S. 25). Sie können bis zu 15 Tracks
(für eine Audio-Disc) oder Titel/Kapitel (für ein DVD-
Video) einrichten.
SHUFFLE :
Legt den Zufallswiedergabemodus fest (S. 23).
REPEAT
: Ändert die Wiederholeinstellung. Mit
jedem Drücken der Taste ändert sich die
Wiederholeinstellung wie unten dargestellt.
:
Wiederholt den Titel, der gerade wiedergegeben wird.
: Wiederholt das Kapitel, das gerade
wiedergegeben wird.
: Wiederholt den Ordner, der gerade
wiedergegeben wird.
: Wiederholt alle Tracks/Dateien auf der Disc.
: Wiederholt den Track/die Datei, die gerade
wiedergegeben wird.
5 Zifferntasten: Geben Sie hierüber Zahlen ein oder
springen Sie während der Wiedergabe zum
entsprechend nummerierten Track/Kapitel. Diese
Tasten sind je nach Disctyp und Wiedergabebedingung
eventuell nicht vorhanden.
6 CLEAR: Löscht eingegebene Zahlen/Einstellungen.
7 PIP : Aktiviert/deaktiviert die Funktion Bild im
Bild (S. 26). Die Bild im Bild Anzeige ( ) erscheint
auf dem Bildschirm, wenn diese Funktion verfügbar
ist. Sie können diese Funktion auch über das
Bildschirmmenü auswählen (S. 23).
Die Bild im Bild Anzeige erscheint nur, wenn Bild
im Bild Anzeige aktiviert ist (S. 31).
8 MIRACAST: Startet Miracast (S. 22).
9 2ND AUDIO : Wählt den Zweitton der Funktion
Bild im Bild (S. 26) oder die Audiokommentare aus.
Die Zweittonauswahl-Anzeige ( ) erscheint auf
dem Bildschirm, wenn diese Funktion verfügbar ist
(S. 34). Sie können diese Funktion auch über das
Bildschirmmenü auswählen (S. 23).
Die Zweittonauswahl-Anzeige erscheint nur, wenn
Zweittonauswahl aktiviert ist (S. 31).
0 HOME: Zeigt das HOME-Menü an (S. 19).
Hinweis
PROGRAM SHUFFLE REPEAT
REPEAT A/B
ZOOM
AUDIO
SUBTITTLE
ANGLE
SEARCH
MIRACAST
CLEAR
PIP
HOME
2ND
AUDIO
ENTER
TOP MENU
RETURN ON SCREEN
POP-UP MENU
SETUP
STATUSSETUP
RED
GREEN BLUE
YELLOW
L
N
J
K
H
E
M
I
0
7
6
5
D
4
3
8
A
9
C
B
E
F
2
1
G
Hinweis
Hinweis
BD
DVD
VIDEO PHOTO
DVD
CD
DVD
CD
VIDEO
PHOTO
BD
DVD
CD
PHOTO
BD
BD
9 De
Bedienungselemente und deren Funktionen
Einleitung
1
Deutsch
A TOP MENU : Zeigt das Top-Menü an,
wenn die Disc ein Menü enthält. Wählen Sie den
gewünschten Gegenstand über 5/a/2/3 und
ENTER.
Bestimmte Bedienungen können sich je nach Disc
unterscheiden. Führen Sie die Anweisungen der
jeweiligen Menübildschirme aus.
B Cursortasten (5/a/2/3): Versetzt die Markierung
im Menü.
ENTER: Wählt das hervorgehobene Menü/
Gegenstand aus.
C RETURN: Kehrt zum vorherigen Menü oder
Bildschirm usw. zurück.
D Cursortasten
: Stoppt die Wiedergabe.
: Hält die Wiedergabe an.
: Gibt den Inhalt wieder.
/: Überspringt einen Abschnitt rückwärts/
vorwärts.
/
:
Nimmt einen Suchrücklauf/-vorlauf vor. Mit jedem
Drücken der Taste ändert sich die Suchvorlauf-/-
rücklaufgeschwindigkeit (Suchrücklauf/-vorlauf: je
fünf Schritte). Drücken Sie , um die normale
Wiedergabe fortzusetzen.
: Ändert die Geschwindigkeit einer Diashow
(schneller/langsamer: 3 Schritte).
/
:
Taste drücken, um eine Sofortsuche/erneute
Wiedergabe zu bewirken. Über die Sofortsuche wird
in der Wiedergabe des Inhalts um 30 Sekunden nach
vorne gesprungen. Über die Sofortwiedergabe wird
der Inhalt von vor zehn Sekunden erneut angezeigt.
E SETUP: Zeigt das SETUP-Menü an (S. 27).
F STATUS: Zeigt die Wiedergabeinformationen an
(S. 24).
G REPEAT A/B :
Gibt einen bestimmten Teil wieder, der wiederholt
werden soll.
1 Drücken Sie REPEAT A/B an der Stelle, an der
Sie den Anfangspunkt setzen möchten. „A-“ wird
auf dem Bildschirm angezeigt.
2 Drücken Sie erneut REPEAT A/B an der Stelle, an
der Sie den Endpunkt setzen möchten. „A-B“ wird
auf dem Bildschirm angezeigt. Die wiederholte
Wiedergabe wird gestartet.
3 Um die wiederholte Wiedergabe abzubrechen,
drücken Sie REPEAT A/B. „A-B
“ wi
rd
ausgeblendet und die wiederholte Wiedergabe
beendet.
Diese Funktion kann je nach technischen Daten der
Disc ggf. nicht durchgeführt werden.
H SUBTITLE : Ändert die
Sprache der Untertitel (S. 42), falls verfügbar. Sie
können diese Funktion auch über das Bildschirmmenü
auswählen (S. 23).
I ANGLE : Wechselt den Kamerawinkel,
wenn das Video in mehreren Blickwinkeln
aufgenommen wurde. Die Kamerawinkel-Anzeige
( ) erscheint auf dem Bildschirm, wenn diese
Funktion verfügbar ist. Sie können diese Funktion
auch über das Bildschirmmenü auswählen (S. 23).
Die Kamerawinkel-Anzeige erscheint nur, wenn
Kamerawinkel aktiviert ist (S. 31).
J AUDIO : Ändert die Audiosprache oder
das Audioformat. Sie können diese Funktion auch
über das Bildschirmmenü auswählen (S. 23).
K SEARCH :
Springt zu einem festgelegten Gegenstand während
der Wiedergabe. Weitere Einzelheiten zu dieser
Funktion finden Sie unter „Verwenden der Suche“
(S. 25). Sie können diese Funktion auch über das
Status-Menü auswählen (S. 24).
L YouTube: Startet YouTube (S. 21).
M POP-UP/MENU : Zeigt das Popup-
Menü an. Die angezeigten Menüpunkte sind je nach
Disc unterschiedlich. Näheres zum Aufrufen und
Bedienen des Popup-Menüs finden Sie in der
Bedienungsanleitung der Disc.
Je nach der DVD wird das Top-Menü durch Drücken
von POP-UP/MENU angezeigt.
N ON SCREEN: Zeigt das Bildschirmmenü an (S. 23).
Hinweis
BD
DVD
BD
DVD
CD
VIDEO MUSIC PHOTO
BD
DVD
CD
VIDEO MUSIC
PHOTO
BD
DVD
CD
VIDEO MUSIC
Hinweis
Hinweis
BD DVD
CD
VIDEO
BD DVD
BD DVD
BD
DVD
BD
DVD
CD
BD
DVD
10 De
Bedienungselemente und deren Funktionen
Batterien in die Fernbedienung
einlegen
Tauschen Sie beide Batterien aus, wenn sich die
Funktionsreichweite der Fernbedienung verringert.
Verwenden Sie Batterien des Typs AAA, R03 bzw.
UM-4.
Vergewissern Sie sich, dass Sie die Batterien mit der
richtigen Polarität einlegen. Beachten Sie die
Darstellung im Batteriefach.
Entnehmen Sie die Batterien, wenn Sie die
Fernbedienung für längere Zeit nicht benutzen.
Verwenden Sie nicht alte und neue Batterien
zusammen.
Verwenden Sie nicht unterschiedliche Batteriearten
zusammen (wie z.B. Alkali- und Manganbatterien).
Lesen Sie sich die Informationen auf der
Verpackung sorgfältig durch, da diese Batterien die
gleiche Form und Farbe haben können.
Wenn die Batterien ausgelaufen sind, entsorgen Sie
sie sofort. Berühren Sie das ausgelaufene Material
nicht und lassen Sie es nicht in Kontakt mit der
Kleidung usw. kommen. Reinigen Sie das
Batteriefach sorgfältig, bevor Sie neue Batterien
einlegen.
Entsorgen Sie Batterien nicht mit dem
Haushaltsmüll, sondern korrekt und in Einklang mit
den lokalen Vorschriften.
Halten Sie Batterien von Kindern fern. Wenden Sie
sich umgehend an einen Arzt, wenn eine Batterie
versehentlich verschluckt wurde.
Wenn Sie die Fernbedienung längere Zeit nicht
verwenden werden, entfernen Sie die Batterien aus
der Fernbedienung.
Laden Sie die mitgelieferten Batterien nicht auf und
zerlegen Sie sie nicht.
Wirkungsbereich der Fernbedienung
ID-Funktion
Die Fernbedienung des Players kann möglicherweise
andere Yamaha-Produkte steuern und deren
Fernbedienung den Player. Ändern Sie in solchem Fall die
Fernbedienungs-ID, um ungewollte Bedienung zu
verhindern. Wenn Sie die Fernbedienungs-ID geändert
haben, müssen Sie sicherstellen, dass Sie die gleiche ID
für das Hauptgerät verwenden.
Die Standardeinstellung ist ID1.
1 Fernbedienungseinstellung
Um die ID von ID1 auf ID2 zu ändern, halten Sie
die rote Taste und die Zahlentaste 2 gleichzeitig
sieben Sekunden lang gedrückt . Um die ID von
ID2 auf ID1 zu ändern, halten Sie die rote Taste und
die Zahlentaste 1 gleichzeitig sieben Sekunden lang
gedrückt .
2 Hauptgeräteeinstellung
Halten Sie und auf der
Vorderseite gleichzeitig für zwei Sekunden
gedrückt, um die aktuelle ID anzuzeigen, wenn:
Keine Disc in den Player eingelegt ist.
Die Disclade geschlossen ist.
Die Wiedergabe angehalten wurde.
„NO DISC“ auf dem Display an der Vorderseite
angezeigt wird.
Halten Sie die Tasten weitere zwei Sekunden lang
gedrückt, um die ID zwischen ID1 und ID2 zu
ändern.
Befinden sich für wenige Minuten keine Batterien in
der Fernbedienung oder verbleiben verbrauchte
Batterien in der Fernbedienung, wird die
Fernbedienungs-ID automatisch auf ID1 gesetzt.
Wenn Sie die Fernbedienung in der ID2-Einstellung
verwenden möchten, legen Sie neue Batterien ein
und richten Sie die Fernbedienungs-ID erneut ein.
Wenn der Player zurückgesetzt wird, ist die
Fernbedienungs-ID ID1.
Hinweise
1
3
22
Hinweise
USB
SA-CD
30°30°
Fernbedienungssensor
6 m
11 De
Anschlüsse
2
Deutsch
ANSCHLÜSSE
Stellen Sie entsprechend den zu verwendenden Geräten die notwendigen Video-/Audio-Verbindungen her.
Näheres über die Audio-/Video-Ausgangsformate finden Sie auf Seite 35.
Stellen Sie für die Verbindungen im Fachhandel erhältliche Kabel bereit. Die Art und Anzahl der notwendigen
Kabel hängt von den anzuschließenden Geräten ab.
Video-/Audio-Wiedergabe auf TV und AV-Receiver
Siehe unter „TV-Verbindung über einen AV-Receiver“ (S. 12).
Video-/Audio-Wiedergabe nur auf TV
Siehe unter „Direkte TV-Verbindung“ (S. 12).
Video-/Audio-Wiedergabe auf TV und Audiogerät
Siehe unter „TV- und Audiogerät-Verbindung“ (S. 13).
Informationen über HDMI
Für den Genuss hochqualitativen Videos und digitalen
Sounds über die HDMI-Buchse benutzen Sie im
Fachhandel erhältliche HIGH SPEED HDMI-Kabel mit
dem HDMI-Logo (wie auf der Rückseite der Anleitung).
Für Informationen über die HDMI-Steuerfunktion
siehe „HDMI Steuerung“ (S. 30).
Um den Ausgabemodus der HDMI-Buchse zu
ändern, konfigurieren Sie „HDMI“ (S. 34) in Audio-
Einstellungen.
Verbindung für die Wiedergabe von
Blu-ray 3D-Discs
Für den Genuss von Blu-ray 3D-Discs mit dem Player
muss Ihr System folgende Bedingungen erfüllen.
Ihr TV und AV-Receiver (falls vorhanden) muss die
3D-Funktion unterstützen.
3D Ausgang in Anzeige Einstellung (S. 32) ist auf
„Auto“ eingestellt.
Video-/Audio-Verbindungen
Tipps
USB
5#%&
Dieser Player
AV-Receiver
TV
Video (HDMI)Video/Audio
(HDMI)
Lautsprecher
Audio
USB
5#%&
Dieser Player
TV
Video/Audio
(HDMI)
USB
5#%&
Dieser Player
TV
Video (HDMI)
Audio
(koaxial, optisch oder analog)
Audiogerät
(z.B. Soundbar)
Tipps
12 De
Video-/Audio-Verbindungen
TV-Verbindung über einen AV-
Receiver
Verbinden Sie den Player mit dem AV-Receiver und den
AV-Receiver mit dem TV über HDMI-Kabel.
Informationen über Lautsprecherverbindungen finden Sie
in den Bedienungsanleitungen des AV-Receivers und der
Lautsprecher.
Vorsicht!
Schließen Sie das Netzkabel des Players
nicht an, bevor alle anderen Anschlüsse
vorgenommen wurden.
Direkte TV-Verbindung
Verbinden Sie den Player mit dem TV über ein HDMI-
Kabel.
Vorsicht!
Schließen Sie das Netzkabel des Players
nicht an, bevor nicht alle anderen
Anschlüsse vorgenommen wurden.
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT
NETWORK
USB
HDMI
HDMI IN
HDMI OUT
HDMI IN
HDMI
Dieser Player
AV-Receiver
TV
HDMI-Buchse
Lautsprecher
HDMI-Kabel
HDMI-Eingang
HDMI-Kabel
HDMI-Ausgang
HDMI-Eingang
Lautsprecherver-
bindungen
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT
NETWORK
USB
HDMI
HDMI
HDMI IN
Dieser Player
TV
HDMI-Buchse
HDMI-Kabel
HDMI-Eingang
13 De
Video-/Audio-Verbindungen
Anschlüsse
2
Deutsch
TV- und Audiogerät-Verbindung
Verbinden Sie den Player mit dem TV über ein HDMI-Kabel und den Player mit dem Audiogerät über ein Audiokabel
(digital/optisch, digital/koaxial oder Cinch/stereo).
Vorsicht!
Schließen Sie das Netzkabel des Players nicht an, bevor nicht alle anderen Anschlüsse
vorgenommen wurden.
Um den Ausgabemodus der COAXIAL/OPTICAL-Buchsen zu ändern, konfigurieren Sie „Coaxial / Optical“
(S. 34) in Audio-Einstellungen.
Falls die Audiowiedergabe auf dem TV sowie dem Audiogerät stattfindet, stellen Sie HDMI in Audio-
Einstellungen auf Off, um die Audiowiedergabe auf dem TV zu deaktivieren.
Audiosignale von SACDs können nicht an den COAXIAL- oder OPTICAL-Buchsen (S. 35) ausgegeben werden.
Tipps
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT
NETWORK
USB
HDMI
HDMI
HDMI IN
COAXIAL
OPTICAL
AUDIO OUT
COAXIAL OPTICALAUDIO
Dieser Player
TV
OPTICAL-, COAXIAL- oder
AUDIO OUT L/R-Buchsen
Audiokabel
(digital/optisch, digital/koaxial
oder Cinch/stereo)
Audioeingang
(digital/optisch, digital/koaxial
oder analog/stereo)
Audiogerät
(z.B. Soundbar)
HDMI-Eingang
HDMI-Kabel
HDMI-Ausgang
14 De
Die Anbindung des Players an ein (Drahtlos- oder Kabel-) Netzwerk ermöglicht folgende Funktionen.
Wiedergabe von DLNA-Server (PC oder NAS)-Inhalten (S. 19)
Wiedergabe von Netzwerkdienstinhalten (S. 21)
Abspielen von BD-Live-kompatiblen Discs (S. 25)
Bedienung des Players über Mobilgeräte (AV CONTROLLER) (S. 22)
Für die Nutzung von Netzwerkdiensten oder der BD-Live-Funktion ist eine Breitband-Internetverbindung
erforderlich.
Orientieren Sie sich bitte an der Bedienungsanleitung des verwendeten Geräts, da die Geräte und
Anschlussmethoden je nach Netzwerkumgebung unterschiedlich sein können.
Netzwerkkabel und Router müssen den 10BASE-T/100BASE-TX-Standard unterstützen.
Wenn Ihr Router DHCP unterstützt, sind für den Player keinerlei Netzwerkeinstellungen notwendig, da die
Netzwerkparameter (z.B. IP-Adresse) automatisch eingerichtet werden. Ein Konfigurieren der
Netzwerkeinstellungen ist nur dann erforderlich, wenn der Router DHCP nicht unterstützt oder wenn Sie die
Netzwerkparameter manuell einrichten möchten (S. 32).
Drahtlosverbindung
Dank der Wi-Fi-Funktion des Players kann dieser drahtlos
an Ihr Netzwerk (Router) angebunden werden. Beziehen
Sie sich auf „Einstellung der Drahtlosverbindung“ (S. 18),
um die Drahtlosverbindung zu konfigurieren und die Wi-
Fi-Funktion benutzen zu können.
Kabelverbindung
Binden Sie den Player über ein abgeschirmtes verdrilltes
Netzwerkkabel (im Fachhandel erhältlich) an Ihr
Netzwerk (Router) an.
Netzwerkanbindung
Hinweise
Tipp
USB
5#%&
Dieser Player
Internet Modem Router PC
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT
NETWORK
USB
HDMI
REMOTE
C
OUT
LAN
NETWORK
Dieser Player
Internet Modem Router PC
NETWORK-
Buchse
Netzwerkabel
LAN-Buchse
15 De
Netzwerkanbindung
Anschlüsse
2
Deutsch
DLNA-Server-Einrichtung
Dank DLNA können Sie Multimedia-Inhalte (z.B. Videos, Musik und Fotos), die auf einem an Ihrem Netzwerk
angebundenen DLNA-Server (PC oder NAS) gespeichert sind, freigeben und mit dem Player wiedergeben.
Außerdem können Sie mit Ihrem Mobilgerät (z.B. Smartphone oder Tablet) als drahtloser Controller den Player über das
Netzwerk steuern.
Um die DLNA-Funktionen benutzen zu können, nehmen Sie nach der Netzwerkanbindung (S. 14) die unten
beschriebene DLNA-Server-Einrichtung vor.
Um die DLNA-Funktionen benutzen zu können, müssen alle Geräte am selben Netzwerk angebunden sein.
Um einen NAS als DLNA-Server einsetzen zu können, muss dieser DLNA unterstützen.
Medienfreigabe-Einstellung des DLNA-
Servers
Um Multimedia-Inhalte, die auf Ihrem DLNA-Server (PC
oder NAS) gespeichert sind, wiedergeben zu können,
müssen Sie zunächst die Medienfreigabe-Einstellung in
der Software des DLNA-Servers konfigurieren.
Für Informationen über die Einstellung des DLNA-
Servers und dessen unterstütze Dateiformate
beziehen Sie sich auf die Bedienungsanleitungen
Ihres DLNA-Servers und dessen Software.
1 Schalten Sie Ihren DLNA-Server (PC oder NAS) und
den Player ein.
2
Wenn Sie einen PC als DLNA-Server einsetzen,
vergewissern Sie sich, dass DLNA-Serversoftware (z.B.
Windows Media Player 12) auf dem PC installiert ist.
3
Aktivieren Sie die Medienfreigabe auf Ihrem DLNA-
Server und geben Sie Medien für den Player frei.
Die DLNA-Server-Einstellung ist hiermit abgeschlossen.
Um DLNA-Server-Inhalte mit dem Player wiedergeben
zu können, wählen Sie einen DLNA-Server und eine
Multimedia-Datei im HOME-Menü aus (S. 19).
Mobilgerät als Media Controller
einsetzen
Falls Ihr Mobilgerät (z.B. Smartphone oder Tablet) die
Funktion Digital Media Controller (DMC) unterstützt,
können Sie den Player von Ihrem Smartphone oder Tablet
über das Netzwerk steuern.
Um den Player mit Ihrem Mobilgerät steuern zu
können, stellen SieDMC-Steuerung (S. 32) im
SETUP-Menü auf Aktivieren ein
(Standardeinstellung).
Beziehen Sie sich auf die Bedienungsanleitungen
Ihres Mobilgeräts und dessen Software, um sich zu
vergewissern, dass Ihr Mobilgerät die DMC-
Funktion unterstützt.
Hinweise
USB
5#%&
DLNA
Dieser Player
DLNA-Server
(PC oder NAS)
Fernbedienung Controller
(Mobilgerät)
Tipp Tipps
16 De
Sie können ein USB-Speichergerät am USB-Anschluss an der Vorder- oder Rückseite des Players einstecken und auf
dem Speichergerät abgelegte Multimedia-Dateien wiedergeben (S. 19).
Yamaha kann nicht garantieren, dass die USB-Speichergeräte aller Marken mit diesem Player verwendbar sind.
Stecken Sie für die Benutzung der BD-Live-Funktion (S. 26) ein USB-Speichergerät an einem der USB-
Anschlüsse (vorn/hinten) des Players ein.
USB-Verbindung
Hinweise
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT
NETWORK
USB
HDMI
USB
USB
USB
Dieser Player
USB-Anschluss (vorn)
Dieser Player
USB-Speichergerät
USB-Anschluss (hinten)
USB-Speichergerät
17 De
Anschlüsse
2
Deutsch
Verbindung mit den REMOTE
CONTROL-Buchsen
Fernbedienungssignale können über die REMOTE
CONTROL (OUT/IN)-Buchsen übertragen und
empfangen werden.
Schließen Sie Mono-3,5-mm-Miniklinkenkabel (im
Fachhandel erhältlich) an die REMOTE CONTROL
(OUT/IN)-Buchsen an.
Wenn Ihr Yamaha AV-Receiver über die REMOTE
OUT-Buchse SCENE-Steuersignale übertragen
kann, können Sie den Player mit der SCENE-
Funktion bedienen.
Vorsicht!
Schließen Sie das Netzkabel des Players
nicht an, bevor nicht alle anderen
Anschlüsse vorgenommen wurden.
Informationen über die SCENE-Funktion finden Sie
in der Bedienungsanleitung des Yamaha AV-
Receivers.
Sie können ein Yamaha-Gerät (z.B. CD-Player) mit
SCENE-Funktion an die REMOTE CONTROL
(OUT)-Buchse des Players anschließen.
Netzkabel anschließen
Nach Abschluss aller Verbindungen stecken Sie das
mitgelieferte Netzkabel in die AC IN-Buchse an der
Rückseite des Players ein. Anschließend folgt dann
der Anschluss an eine Netzsteckdose.
Weitere Verbindungen
NETWORK
USB
REMOTE CONTROL
OUT IN
REMOTE CONTROL IN
REMOTE CONTROL OUT
Dieser Player
An REMOTE
CONTROL
(IN)-Buchse
Mono-3,5-mm-
Miniklinkenkabel
Yamaha-Gerät
Zur
Fernbedienungs-
Eingangsbuchse
Mono-3,5-mm-
Miniklinkenkabel
Infrarotsignal-Empfänger
oder Yamaha-Gerät
(z.B. AV-Receiver)
An REMOTE
CONTROL
(OUT)-Buchse
Zur
Fernbedienungs-
Ausgangsbuchse
Tipps
AC IN
Zur Netzsteckdose
18 De
WIEDERGABE
Einstellung über Einfaches
Konfigurationsmenü
Über Einfaches Konfigurationsmenü können Sie bequem
die Sprache, die Auflösung und das Bildseitenverhältnis
festlegen. Der Einfaches Konfigurationsmenü-Bildschirm
wird angezeigt, wenn Sie den Player zum allerersten Mal
einschalten. Die gleiche Einstellung kann über das
SETUP-Menü = System = Einfaches
Konfigurationsmenü vorgenommen werden.
1 Wird der Einfaches Konfigurationsmenü-Bildschirm
angezeigt, drücken Sie ENTER, um Einfaches
Konfigurationsmenü zu starten.
2 Legen Sie Sprache, Auflösung und
Bildseitenverhältnis fest, indem Sie die Anweisungen
auf dem Bildschirm befolgen.
Wenn nach Abschluss von Einfaches Konfigurationsmenü
kein Bild angezeigt wird, schlagen Sie unter „Fehlersuche“
(S. 39) nach.
Beim Einschalten dieses Players erscheint eine
Warnmeldung hinsichtlich der Wiedergabe von 3D-Videos.
Drücken Sie
ENTER
, um diese Meldung auszublenden,
oder
CLEAR
, um sie zu deaktivieren (S. 30).
Einstellung der Drahtlosverbindung
Führen Sie die untere Schrittfolge aus, um die
Drahtlosverbindung zu konfigurieren, sodass Sie den
Player an Ihr Drahtlosnetzwerk anbinden können.
Wenn Ihr Router (Zugangspunkt) die Funktion WPS (Wi-
Fi Protected Setup) unterstützt, können Sie die
automatische Einstellung ausführen, um den Player ohne
manuelle Eingabe von Netzwerkinformationen (z.B.
SSID) mit dem Router zu verbinden.
1
Drücken Sie
SETUP
, um das SETUP-Menü aufzurufen.
2 Wählen Sie Allgemeine Einstellungen = Netzwerk =
Verbindungseinstellungen = Drahtlos.
3 Drücken Sie 2/3, um Ja zu wählen, und drücken Sie
dann ENTER.
4 Drücken Sie 2/3, um eine der folgende
Einrichtungsmethoden zu wählen, und drücken Sie
dann ENTER.
Suche: Wählen Sie diese Option, um nach verfügbaren
Drahtlosnetzwerken zu suchen. Wenn die Netzwerkliste
angezeigt wird, wählen Sie die entsprechende SSID für
die Verbindung und geben Sie das Passwort ein.
Manuell: Wählen Sie diese Option, um Die
Netzwerkinformationen (z.B. SSID) manuell einzugeben.
Auto: Wählen Sie diese Option, um die WPS-Funktion zu
verwenden. Wählen Sie PBC (Push Button Configuration)
oder PIN code und befolgen Sie dann die Anweisungen
auf dem Bildschirm.
Für Einzelheiten zur Bedienung Ihres Routers
(Zugangspunkt) beziehen Sie sich auf dessen
Anleitung.
Wenn WPS nicht funktioniert, wählen Sie „Suche“
oder „Manuell“, um die Drahtlosverbindung zu
konfigurieren.
Geräte, die den 2,4-GHz-Frequenzbereich
verwenden, wie z.B. Mikrowellen-, Bluetooth- oder
kabellose Digitalgeräte, können die Kommunikation
unterbrechen. Stellen Sie den Player weiter entfernt
von solchen Geräten auf oder schalten Sie diese aus.
Die Geschwindigkeit einer drahtlosen
Netzwerkverbindung hängt von Ihrer
Netzwerkumgebung ab (Router, Abstand zwischen
Router und Player, Aufstellungsort usw.). Bei
Unterbrechungen der Sound- oder Videowiedergabe
bringen Sie Player und Router näher zusammen oder
ändern Sie die Ausrichtung des Players oder der
Routerantenne.
Grundeinstellungen
Hinweise
Hinweise
19 De
Wiedergabe
3
Deutsch
Über das HOME-Menü können Sie folgende Grundbedienung des Players vornehmen.
Durchsuchen und Wiedergabe von Multimedia-Dateien auf verschiedenen Discs, USB-Geräten und DLNA-
Servern (PC oder NAS)
Zugang zu verschiedenen Netzwerkdiensten (S. 21)
Aufrufen des SETUP-Menüs (S. 27)
Einzelheiten zu den abspielbaren Discs und Formaten finden Sie auf Seite 3.
Für die Wiedergabe von DLNA-Server-Inhalten mit dem Player muss die Medienfreigabe-Einstellung (S. 15) des
DLNA-Servers konfiguriert werden.
Wiedergabe von Foto/Musik/Video
Grundlegende Bedienung
2/3/5/a: Verschiebt die Markierung.
2: Kehrt zum übergeordneten Ordner zurück.
HOME: Wechselt zum und verlässt das HOME-Menü.
ENTER: Bestätigt den Ordner/die Datei.
Allgemeine Bedienungsschritte für die
Wiedergabe von Dateien in einem
ausgewählten Ordner
Beispiel: Auswahl einer Filmdatei auf einem USB-
Speichergerät
Halten Sie die Wiedergabe des Videos an, bevor Sie
zum HOME-Menü wechseln.
1 Drücken Sie HOME, um das HOME-Menü
aufzurufen.
2 Drücken Sie 5/a, um das Gegenstand zu wählen, das
die wiederzugebende Datei enthält, und drücken Sie
dann ENTER.
Wenn Ihr DLNA-Server nicht aufgeführt ist,
vergewissern Sie sich, dass der DLNA-Server
eingeschaltet ist, und wählen Sie dann DLNA-
Suche, um die Liste zu aktualisieren.
3 Wählen Sie die den wiederzugebenden Ordne Foto,
Musik, Video oder AVCHD aus und drücken Sie dann
ENTER.
Um zum übergeordneten Ordner zurückzukehren,
drücken Sie RETURN oder wählen Sie .
HOME-Menü
Tipps
Hinweis
MIRACAST
PIP
HOME
2ND
AUDIO
ENTER
TOP MENU
RETURN ON SCREEN
POP-UP MENU
SETUP
Hinweis
Fortsetzung auf der nächsten Seite. \
20 De
HOME-Menü
Beachten Sie, dass im nächsten Schritt nur der
Dateityp angezeigt wird, der in diesem Schritt
ausgewählt wurde. Wenn Sie beispielsweise in
diesem Schritt den Foto-Ordner ausgewählt haben,
werden nach diesem Schritt nur Fotodateien
angezeigt.
4 Wählen Sie den Ordner aus, in dem die
wiederzugebende Datei enthalten ist.
5 Wählen Sie die wiederzugebende Datei aus und
drücken Sie dann ENTER.
Wird eine Videodatei ausgewählt, startet die
Wiedergabe.
Wird eine Musikdatei ausgewählt, wird der
Statusbildschirm angezeigt und die Wiedergabe startet.
Wird eine Fotodatei ausgewählt, startet die Diashow.
Um die Diashow mit Musik zu untermalen, drücken
Sie HOME, um zum HOME-Menü zurückzukehren,
während Musik wiedergegeben wird, und wählen
Sie dann die Fotodatei aus.
Je nach Inhalt wird die angezeigte Datei eventuell
nicht wiedergegeben.
Bedienungsschritte für die
Betrachtung von Fotos
Während des Betrachtens von Fotos haben die Tasten auf
der Fernbedienung die unten dargestellten Funktionen.
: Hält die Diashow an und kehrt zum Dateibrowser
zurück.
: Setzt die Diashow auf Pause.
: Gibt die Diashow wieder.
: Wechselt zum nächsten Foto.
: Wechselt zum vorherigen Foto.
: Erhöht die Geschwindigkeit der Diashow in drei
Schritten.
: Verringert die Geschwindigkeit der Diashow in
drei Schritten.
5: Invertiert ein Foto.
a: Spiegelt ein Foto.
2: Dreht ein Foto gegen den Uhrzeigersinn.
3: Dreht ein Foto im Uhrzeigersinn.
ZOOM: Vergrößert/verkleinert ein Foto (vergrößern/
verkleinern: je drei Schritte).
5/a/2/3: Schwenkt im Vergrößerungs-/
Verkleinerungsmodus, wenn ein Foto größer als der
Bildschirm sein sollte.
Hinweis
Tipp
Hinweis
21 De
Wiedergabe
3
Deutsch
Mit folgenden Netzwerkdiensten können Sie Multimedia-Inhalte (z.B. Fotos und Videos) genießen.
Dropbox
Picasa-Webalben
YouTube
Der Zugang zu von Drittanbietern zur Verfügung gestellten Inhalten erfordert eine schnelle Internetverbindung und
kann eventuell erst nach der Einrichtung und Registrierung eines Accounts oder eines kostenpflichtigen Abos erfolgen.
Inhaltsdienste von Drittanbietern können jederzeit ohne vorherige Mitteilung geändert, ausgesetzt, unterbrochen
oder eingestellt werden. In solchen Fälle lehnt Yamaha jegliche Haftung ab.
Manche Inhalte stehen nur in bestimmten Ländern und/oder in bestimmten Sprachen zur Verfügung.
Yamaha ist nicht für Inhaltsdienste von Drittanbietern verantwortlich und gewährt keinerlei Garantie, dass deren
Inhalte dauerhaft oder auch nur über eine bestimmte Zeitspanne hinweg zur Verfügung gestellt werden.
1 Drücken Sie HOME, um das HOME-Menü aufzurufen.
Um zum YouTube-Menü zurückzugelangen,
drücken Sie YouTube.
2 Drücken Sie 5/a, um Network Services auszuwählen,
und drücken Sie dann ENTER.
3 Drücken Sie 2/3/5/a, um den gewünschten
Netzwerkdienst auszuwählen, und drücken Sie dann
ENTER.
4 Drücken Sie 2/3/5/a, um einen Gegenstand
auszuwählen, und drücken Sie dann ENTER, um die
Auswahl zu bestätigen (oder die Wiedergabe zu
starten).
Um einen Netzwerkdienst zu verlassen, drücken Sie
HOME.
Die Bedienung nach Schritt 4 hängt von den
Menüpunkten der einzelnen Netzwerkdienste ab.
Informationen über Dropbox™
Dropbox ist ein Netzwerkdienst, der es ermöglicht, Daten
in Dropbox abzulegen und diese über PC, Telefone oder
Tablet abzurufen. Fotos können automatisch geladen und
Videos überall betrachtet werden.
Weitere Informationen unter www.dropbox.com.
Informationen über Picasa™-
Webalben
Picasa-Webalben ist ein Netzwerkdienst, der es Benutzern
ermöglicht Freunden und Familienmitgliedern Fotos zu
zeigen oder öffentliche Fotoalben zu betrachten.
Weitere Informationen unter picasaweb.google.com
Informationen über YouTube™
YouTube ist ein Netzwerkdienst, der es Benutzern
ermöglicht über das Internet Originalvideos zu entdecken,
zu betrachten und zu zeigen.
Weitere Informationen unter www.youtube.com.
Verwenden von Netzwerkdiensten
Hinweise
Tipp
Tipp
Hinweis
Dropbox ist ein Markenzeichen von Dropbox Inc.
Picasa und das Picasa-Logo sind Markenzeichen von
Google. Inc.
YouTube und das YouTube-Logo sind Markenzeichen
von Google. Inc.
22 De
Miracast ermöglicht es über einen Zugangspunkt (Wi-Fi Direct) ohne Kabel oder Netzwerkverbindung Videos von und
auf verschiedenen Geräten wiederzugeben. Sie können z.B. Bilder von einem Gerät, das Miracast unterstützt
(Smartphone usw.), auf einem mit dem Player verbundenen TV betrachten.
Zum Prüfen, ob Ihr Gerät Miracast unterstützt, beziehen Sie sich auf dessen Anleitung.
Während Miracast auf dem Player aktiviert ist, sind andere Netzwerkfunktionen (z.B. DLNA) nicht verfügbar.
1 Drücken Sie MIRACAST.
2 Betätigen Sie innerhalb 60 Sekunden Ihr Smartphone,
um Miracast zu aktivieren und den Player als
anzubindendes Gerät auszuwählen.
Für Einzelheiten zur Bedienung Ihres Smartphones
beziehen Sie sich auf dessen Anleitung.
3 Um Miracast zu verlassen, drücken Sie MIRACAST.
Sie können Miracast ebenfalls verlassen, indem Sie
HOME oder RETURN drücken.
Mit der „AV CONTROLLER“ App auf Ihrem Mobilgerät können Sie dieses als Fernbedienung für den Player einsetzen.
Sie können die grundlegenden Funktionen eines Yamaha Blu-ray Disc™ Players (Wiedergabe, Pause, Sprung,
Ein-/Ausschalten und Cursorbewegungen) steuern.
Die „AV CONTROLLER“ App ist in mehreren Sprachen erhältlich.
Für nähere Angaben zu „AV CONTROLLER“ besuchen Sie die Yamaha-Website.
Smartphone-Bilder und -Videos auf dem
TV Bildschirm betrachten (Miracast™)
Hinweise
USB
5#%&
Miracast-kompatibles
Gerät
(Smartphone usw.)
Dieser Player
TV
Tipp
In Abhängigkeit der Einsatzbedingungen können Audio-/Video-Unterbrechungen oder TV-Störungen auftreten. In
solchem Fall könnte Folgendes Abhilfe schaffen.
Bringen Sie das Miracast-Gerät näher an den Player.
Schalten Sie unbenutzte Drahtlosgeräte aus.
Entfernen Sie Mikrowellen-, Bluetooth- und andere Drahtlosgeräte aus der Umgebung des Miracast-Geräts.
Bedienung des Players über Mobilgeräte (AV CONTROLLER)
AV CONTROLLER
23 De
Wiedergabe
3
Deutsch
In diesem Kapitel wird die Wiedergabe von im Fachhandel
erhältlichen Blu-ray-Discs, DVDs, SA-CDs, CDs und
selbst aufgenommenen DVD-RW/R-Discs beschrieben.
Informationen über die grundlegende Bedienung zur
Wiedergabe finden Sie auf Seite 8.
Bildschirmmenü
Zum Aufrufen des Bildschirmmenüs drücken Sie ON
SCREEN. Drücken Sie daraufhin 5/a/2/3, um einen
Gegenstand auszuwählen, und dann ENTER, um die
gewünschte Funktion zu aktivieren.
Das Bildschirmmenü enthält die folgenden Gegenstand.
Titel : Zeigt die Nummer des
laufenden Titels an. Sie können zum gewünschten Titel
wechseln, indem Sie diesen hier auswählen.
Kapitel : Zeigt die Nummer des
laufenden Kapitels an. Sie können zum gewünschten
Kapitel wechseln, indem Sie dieses hier auswählen.
Track/Datei :Zeigt die
Nummer des laufenden Tracks/der laufenden Datei an. Sie
können zum gewünschten Track/zur gewünschten Datei
wechseln, indem Sie diesen/diese hier auswählen.
Zeit : Zeigt die
Spielzeit an. Wählen Sie den Anzeigetyp aus den
folgenden Optionen aus:
Abgelaufene Spielzeit des Titels, des Kapitels, der
Disc, des Tracks oder der Datei
Verbleibende Spielzeit des Titels, des Kapitels, der
Disc, des Tracks oder der Datei
Mode/Play Mode
:
Zeigt den
aktuellen Wiedergabemodus an. Sie können den
Wiedergabemodus aus den folgenden Optionen auswählen:
Normal: Normale Wiedergabe.
Shuffle: Jeder Track wird einmal in zufälliger
Reihenfolge und ohne Wiederholung
wiedergegeben.
Random: Zufällige Wiedergabe. Es kann zu
Wiederholungen kommen.
Normal
Zufall CH (Kapitel)
Zufall TT (Titel)
Zufallswiedergabe Alle
Zufalls-CH (Kapitel)
Random TT (Titel)
Random All
Normal
Shuffle F (Ordner)
Random F (Ordner)
Audio :
Zeigt die/das
Audiosprache/-signal der aktuell ausgewählten Blu-ray
Disc/DVD an. Sie können die Audio-Einstellungen ändern.
Winkel :
Zeigt die aktuell ausgewählte
Blickwinkelnummer an. Falls das Video mehrere
Blickwinkel enthält, können Sie den Blickwinkel wechseln.
Untertitel : Zeigt die aktuell
ausgewählte Untertitelsprache an, wenn Untertitel
vorhanden sind.
Untertitel Modus : Zeigt den aktuell ausgewählten
Untertitel-Modus an. Diese Funktion steht nur für externe
Untertitel einer Videodatei zur Verfügung. Sie können den
gewünschten Textstil der Untertitel auswählen.
Bitrate : Zeigt die
Bitrate des Audio-/Video-Signals an.
Zweitvideo : Schaltet die Funktion Bild im Bild
ein/aus (S. 8).
Zweitton : Schaltet den Zweitton ein/aus (S. 8).
Schnellsuche
: Springt um 30
Sekunden.
Sofortwiedergabe
: Gibt die letzten
zehn Sekunden erneut wieder.
CC Auswahl
: Schaltet die Untertitel ein.
Diashow :
Zeigt die Geschwindigkeit der Diashow an. Sie können für
die Geschwindigkeit der Diashow Zeitlupe/Mittel/Schnell
auswählen.
Übergang : Zeigt an, wie Fotos auf dem
Bildschirm angezeigt werden. Sie können den
Übergangstyp auswählen.
Codepage :
Wählt den Zeichencode der Untertitel
aus, die Sie dem DivX-Video hinzugefügt haben (S. 41).
Erweiterte Wiedergabebedienung
Hinweis
BD
DVD
BD
DVD
CD
PHOTO
BD
DVD
CD
DVD
CD
PHOTO
CD
DVD
VIDEO MUSIC PHOTO
BD DVD
BD
DVD
BD DVD
BD
BD DVD CD VIDEO MUSIC
BD
BD
BD DVD CD VIDEO MUSIC
BD DVD CD VIDEO MUSIC
BD DVD
PHOTO
PHOTO
VIDEO
24 De
Erweiterte Wiedergabebedienung
Status-Menü
Hierüber werden unterschiedliche Einstellungen
angezeigt, wie beispielsweise Untertitel, Blickwinkel und
aktuell wiedergegebene Titel-/Kapitel-/Tracknummer.
Zum Aufrufen des Status-Menüs drücken Sie STATUS.
Das Status-Menü enthält die folgenden Untermenüs.
Beispiel: Symbole bei der Wiedergabe einer Blu-ray Disc
1 (Wiedergabestatus)
2 (Disctyp/Videodateisymbol)
3 (Laufende Titelnummer): Sie können mit der
SEARCH-Taste zum angegebenen Titel wechseln
(S. 9).
4 (Laufende Kapitelnummer): Sie können mit
der SEARCH-Taste zum angegebenen Kapitel
wechseln (S. 9).
5 (Abgelaufene Spielzeit): Sie können mit der
SEARCH-Taste zum angegebenen Punkt wechseln
(S. 9).
6
(Wiederholungsmodus):
Zeigt den aktuellen
Wiederholungsmodus an (S. 8).
7 (Aktuell ausgewähltes Audio): Sie können mit
der AUDIOTaste Audiosprache und -format
auswählen.
8 (Aktuell ausgewählter Untertitel): Sie können
mit der SUBTITLE-Taste die Untertitelsprache
auswählen.
Beispiel: Symbole bei der Wiedergabe einer Musikdatei
1 (Wiedergabestatus)
2
(Wiederholungsmodus):
Zeigt den aktuellen
Wiederholungsmodus an (S. 8).
3 (Disctyp/Musikdateisymbol)
4 (Bebilderung) : Zeigt Bebilderung an, wenn
diese in der Datei enthalten ist.
5 (Laufende Track-/Dateinummer): Sie können
mit der SEARCH-Taste zum angegebenen Track
wechseln (S. 9).
6 (Informationen) : Zeigt
Musikinformationen an, wenn diese in der Datei
enthalten sein sollten.
7 (Abgelaufene Spielzeit): Sie können mit der
SEARCH-Taste zum angegebenen Punkt wechseln
(S. 9).
8 (Fortschrittsleiste) : Zeigt den Fortschritt
des aktuellen Lieds an.
1 (Wiedergabestatus)
2 (Fotodateisymbol)
3 (Laufende Dateinummer)
4
(Wiederholungsmodus):
Zeigt den aktuellen
Wiederholungsmodus an (S. 8).
5 (Geschwindigkeit der Diashow)
BD
DVD
VIDEO
1 2 3 4 5
6 7 8
DVD
CD
MUSIC
MUSIC
MUSIC
PHOTO
1 2 3 4 5
25 De
Erweiterte Wiedergabebedienung
Wiedergabe
3
Deutsch
Programmwiedergabe
Hiermit können Sie die Wiedergabereihenfolge der
Audio-Disc-Tracks oder DVD-Kapitel programmieren.
Drücken Sie PROGRAM während der Wiedergabe, um
das PROGRAMM-Fenster für die Programmierung der
Wiedergabereihenfolge aufzurufen.
Sie können bis zu 15 Tracks/Kapitel programmieren.
Beispiel: Programmieren der Wiedergabereihenfolge
von CD-Tracks
1 Drücken Sie PROGRAM während der Wiedergabe.
2 Drücken Sie ENTER, um die Wiedergabereihenfolge
zu programmieren.
Drücken Sie bei einer Audio-Disc 5/a, um den
gewünschten Track zu wählen, und drücken Sie dann
ENTER.
Wählen Sie bei einer DVD-Video-Disc anstelle eines
Tracks den gewünschten Titel (TT) und das
gewünschte Kapitel (CH) .
Um einen Track zu löschen, wählen Sie den
entsprechenden Track aus und drücken Sie dann
CLEAR.
Drücken Sie RETURN, um die Programmwiedergabe
abzubrechen.
3 Nach Abschluss der Programmierung drücken Sie ,
um die Programmwiedergabe einzurichten und zu
starten.
4 Um die Programmwiedergabe abzubrechen, halten Sie
die Wiedergabe vollständig an, indem Sie drücken.
Verwenden der Suche
Hierüber können Sie während der Wiedergabe an einen
bestimmten Punkt wechseln.
1 Drücken Sie SEARCH während der Wiedergabe. Die
Statusleiste wird angezeigt.
2 Drücken Sie 5/a/2/3, um einen der unten
angegebenen Gegenstände auszuwählen, und drücken
Sie dann ENTER.
:
Titelnummer (angezeigt als )
Kapitelnummer (angezeigt als )
Abgelaufene Spielzeit (angezeigt als )
Abgelaufene Kapitelzeit (angezeigt als )
:
Tracknummer (angezeigt als )
Abgelaufene Trackzeit (angezeigt als )
Abgelaufene Disczeit (angezeigt als )
:
Dateinummer (angezeigt als )
Abgelaufene Dateizeit (angezeigt als )
:
Dateinummer (angezeigt als )
3 Drücken Sie 5/a oder die Zifferntasten, um den Wert
des markierten Gegenstands einzurichten/anzupassen,
und drücken Sie dann ENTER, um zum angegebenen
Gegenstand zu wechseln.
4 Um die Statusleiste zu schließen, drücken Sie
STATUS.
BONUSVIEW™ und BD-Live™
benutzen
Dieser Player unterstützt die Wiedergabefunktionen
BONUSVIEW (S. 41) (BD-ROM-Profil 1 Version 1.1)
und BD-Live (S. 41) (BD-ROM-Profil 2).
Die Funktionen und die Wiedergabeart sind je nach
Disc unterschiedlich. Befolgen Sie die Anweisungen
auf der Disc oder im mitgelieferten
Benutzerhandbuch.
DVD
CD
Hinweis
BD
DVD
CD
MUSIC
PHOTO
BD DVD
CD
VIDEO MUSIC
PHOTO
26 De
Erweiterte Wiedergabebedienung
Verwenden der Funktion Bild im Bild
(Zweitbild/Zweitton-Wiedergabe)
Bei BD-Videos, die Zweitbild und -ton für die Funktion
Bild im Bild unterstützen, lässt sich in einem kleinen
Fenster unten rechts auf dem Bildschirm zusätzlich zum
Hauptbild ein Zweitbild mit eigenem Ton anzeigen.
Während die Anzeigen Bild im Bild ( )
oder Zweittonauswahl ( ) sichtbar
sind, drücken Sie PIP, um die Funktion
Bild im Bild-zu aktivieren/deaktivieren.
Für die Wiedergabe des Zweittons müssen Sie die
Audio-Ausgang-Einstellung (Coaxial / Optical oder
HDMI) auf PCM oder Neuberechnen regeln (S. 34).
Je nach Disc müssen Sie, um die Zweitton-
Wiedergabe zu ermöglichen, die Funktion der
Zweitton-Wiedergabe im Top-Menü der Disc
aktivieren (S. 9).
Je nach Inhalt kann die Zweitton und -bild-
Wiedergabe der Funktion Bild im Bild automatisch
erscheinen und verschwinden. Außerdem kann der
Wiedergabebereich beschränkt sein.
Verwendung der BD-Live™-
Funktion
1. Nehmen Sie die
Netzwerkeinstellung vor (S. 31).
2. Stecken Sie ein USB-Speichergerät
im Player ein (S. 16).
BD-Live-Daten werden auf dem am Player
eingesteckten USB-Speichergerät abgelegt. Um
diese Funktionen benutzen zu können, müssen Sie
ein USB-Speichergerät, das USB 2.0 High Speed
(480 Mbit/s) unterstützt, an einem der USB-
Anschlüsse (vorn/hinten) des Players einstecken,
sodass es als Speichermedium benutzt werden kann.
Das Speichermedium dient als Hilfsspeicher bei der
Wiedergabe einer Blu-ray Disc.
Auf dem USB-Speichergerät muss mindestens 2 GB
freier Speicherplatz vorhanden sein.
Nach Bedarf wird automatisch ein BUDA-Ordner
auf dem USB-Speichergerät erstellt.
Wenn der Speicherplatz nicht ausreicht, werden die
Daten nicht kopiert/heruntergeladen. Löschen Sie
unnötige Daten oder verwenden Sie ein anderes
USB-Speichergerät.
Das Laden (Lesen/Schreiben) der Daten kann eine
Weile dauern.
Yamaha kann nicht garantieren, dass die USB-
Speichergeräte aller Marken mit diesem Player
verwendbar sind.
Verwenden Sie kein USB-Verlängerungskabel, um
ein USB-Speichergerät mit dem USB-Anschluss des
Players zu verbinden. Eine einwandfreie Funktion
des Players ist bei Verwendung eines USB-
Verlängerungskabels nicht gewährleistet.
3. Spielen Sie die Disc ab.
4. Führen Sie BD-Live gemäß den
Anweisungen auf der Disc aus.
Während dem BD-Live-Betrieb darf das USB-
Speichergerät oder der Netzstecker nicht abgezogen
werden.
Beziehen Sie sich für Angaben zur Wiedergabeart
und Bedienung von BD-Live-Inhalten usw. auf die
Gebrauchsanweisung der Blu-ray Disc.
Um BD-Live-Funktionen genießen zu können,
nehmen Sie die Netzwerkanbindung (S. 14) und
Netzwerkeinstellungen (S. 31) vor.
Näheres zur Begrenzung des Zugriffs auf BD-Live-
Inhalte finden Sie unter „BD-Live-Verbindung“
(S. 32).
Wie viel Zeit benötigt wird, um Programme auf das
am Player eingesteckte USB-Speichergerät
herunterzuladen, hängt von der Internetverbindung
sowie der Datenmenge ab.
Je nach dem Status (Aktualisierung) des Anbieters
kann es vorkommen, dass über das Internet
verfügbare BD-Live-Programme die Verbindung
nicht anzeigen können. Nehmen Sie in solchen
Fällen die Disc heraus und legen sie wieder ein.
Falls der BD-Live-Bildschirm längere Zeit nach
Wählen der BD-Live-Funktion im Blu-ray Disc-
Menü nicht angezeigt wird, verfügt das USB-
Speichergerät möglicherweise nicht über genügend
freien Speicherplatz. Nehmen Sie in solchen Fällen
die Disc heraus und löschen Sie dann die Daten auf
dem USB-Speichergerät; benutzen Sie hierzu das
„Format“-Menü in „Speichermedium“ (S. 30).
Hinweise
Hauptbild Zweitbild
Hinweise
Hinweise
27 De
Einstellungen
4
Deutsch
EINSTELLUNGEN
Im SETUP-Menü können Sie mit der Fernbedienung verschiedene Bild-, Ton- und Funktionseinstellungen vornehmen.
SETUP-Menü
Menü/Untermenü Gegenstand Funktion Seite
Allgemeine
Einstellungen
System Auto Power Standby Aktiviert/deaktiviert die Energiesparfunktion. 30
HDMI Steuerung Stellt diesen Player auf den Empfang von Steuersignalen
von der Fernbedienung des TV/AV-Receivers ein.
30
Werkseinstellung laden Stellt sämtliche Einstellungen, außer der Sicherheit-
Einstellung, auf die Werksvorgaben zurück.
30
Upgrade Führt die Aktualisierung des Players durch. 30
Upgrade Information Legt fest, ob eine Meldung auf dem Bildschirm angezeigt
wird, wenn der Player neue Software im Internet findet.
30
3D Wiedergabe
Information
Beim Einschalten dieses Players erscheint eine
Warnmeldung hinsichtlich der Wiedergabe von 3D-
Videos.
30
Speichermedium Zeigt den freien Speicherplatz auf dem am Player
eingesteckten USB-Speichergerät bzw. formatiert
„BUDA“-Ordner im USB-Speichergerät.
30
Einfaches
Konfigurationsmenü
Richtet Sprache, Auflösung, Bildseitenverhältnis ein.
30
Sprache OSD Wählt die Sprache des Bildschirmmenüs aus. 30
Menü Legt die Priorität der Sprache für das Discmenü fest. 31
Audio Legt die Priorität der Audiosprache fest. 31
Untertitel Legt die Priorität der Untertitelsprache fest. 31
Wiedergabe Disc Auto-Wiedergabe Richtet diesen Player darauf ein, die Disc-Wiedergabe
automatisch zu starten.
31
Kamerawinkel Legt fest, ob bei der Wiedergabe von Blu-ray Disc/DVD
mit mehreren Blickwinkeln Kamerawinkel angezeigt
wird.
31
Bild im Bild Anzeige Legt fest, ob bei der Wiedergabe von Blu-ray Disc/DVD
mit Bild im Bild Bild im Bild Anzeige angezeigt wird.
31
Zweittonauswahl Legt fest, ob bei der Wiedergabe von Blu-ray Disc/DVD
mit Zweitton Zweittonauswahl angezeigt wird.
31
Last Memory Sorgt dafür, dass der Player beim Schalten in den
Bereitschaftsmodus oder beim Öffnen der Disclade die
zuletzt wiedergegebene Position einer Disc (Blu-ray oder
DVD Video) speichert.
31
DivX (R) VOD-DRM Zeigt Registrierungscode für DivX(R)-Video an. 31
Dvix Untertitel Legt fest, ob für DivX(R)-Video ein Untertitel angezeigt
wird.
31
Sicherheit Passwort ändern Ändert das Passwort für Alterskontrolle und Ländercode. 31
Alterskontrolle Richtet Alterskontrolle je nach dem Inhalt einer Disc ein. 31
Ländercode Richtet Ländercode ein. 31
Netzwerk
Verbindungseinstellungen
Legt ein Verfahren für die Netzwerkverbindung fest. 31
Information Zeigt den Bildschirm der Netzwerkinformationen an. 31
Verbindungstest Führt den Test der Netzwerkverbindung durch. 32
IP Einstellungen Richtet die IP-Einstellung auf Auto/Manuell ein. 32
Proxy-Einstellung Richtet die Proxyeinstellung ein. 32
Netzwerksterung Richtet die Steuerung für Geräte, die über Ethernet
angeschlossen sind, auf Ein/Aus ein.
32
Netzwerkstandby Legt fest, ob der Player durch andere Netzwerkgeräte
eingeschaltet werden kann.
32
DMC-Steuerung Legt fest, ob DLNA-kompatible Digital Media Controller
(DMC) (S. 15) den Player steuern dürfen.
32
BD-Live-Verbindung Richtet die BD-Live-Verbindung auf Erlaubt/Teilweise
erlaubt/Verboten ein.
32
28 De
SETUP-Menü
Anzeige
Einstellung
TV 3D Ausgang Wählt zwischen 3D- und 2D-Videos aus. 32
TV Bildschirm Stellt das Bildseitenverhältnis für den angeschlossenen
Fernseher und den Videoausgang ein.
32
Auflösung HDMI Legt die Auflösung des HDMI-Videoausgangs fest. 33
TV-System Richtet das TV-System auf NTSC/PAL/Multikanal ein. 33
Farbraum Richtet den Farbraum auf YCbCr 4:4:4/YCbCr 4:2:2/Voll
RGB/RGB ein.
33
HDMI Deep Color Richtet HDMI Deep Color auf 30 bit/36 bit/48 bit/Aus ein. 33
HDMI 1080p 24Hz Richtet HDMI 1080p 24Hz auf Auto/Aus ein. 33
Videokonfigurati
onsmenü
Rauschunterdrückung Richtet den Pegel der Rauschunterdrückung ein. 33
De-Interlacing Modus Richtet ein, wie das Videosignal erkannt wird. 33
Untertitel CC Attribute Richtet die Erscheinung der geschlossenen Untertitel ein. 33
Schrifft Farbe
Schrifft Grösse
Schrifft Style
Schrifft Intensität
Schrifft Kanten
Font edge color
BG color
BG opacity
Window color
Window opacity
Richtet Schriftart, Hintergrund und Fenster der
geschlossenen Untertitel ein, wenn CC Attribute auf
Persönlich eingestellt ist.
33
Audio-
Einstellungen
Audio-Ausgang Coaxial / Optical Richtet den Ausgabemodus der COAXIAL/OPTICAL-
Buchse auf Bitstream/PCM/Neuberechnen/Aus ein.
34
HDMI Richtet den Ausgabemodus des HDMI-Anschlusses auf
Bitstream/PCM/Neuberechnen/Aus ein.
34
Downsampling Richtet die Down-Sampling-Frequenz des digitalen
Audiosignals auf 48K/96K/192K ein.
34
DRC Richtet DRC (Dynamic Range Compression) ein. 34
SACD-Ausgang SACD Priorität Wählt die Wiedergabepriorität für Zweikanalinhalte oder
Mehrkanalinhalte, wenn die Disc beide Inhaltsarten
enthält.
34
SACD/CD Layer Legt für eine SA-CD/CD-Hybrid-Disc fest, welcher Layer
abgespielt wird.
34
Lautsprecherein-
stellung
2 Kanal Downmix Richtet die Audio-Ausgabe der AUDIO OUT L/R-Buchse
ein.
34
Post-Prozess Upmix Führt eine Mehrkanalisierung des 2-Kanal-Audiosignals
durch.
34
Systeminformation
Zeigt die Software-Version und die MAC-Adresse an
(S. 42).
34
Menü/Untermenü Gegenstand Funktion Seite
29 De
SETUP-Menü
Einstellungen
4
Deutsch
Beispiel für die Bedienung des
SETUP-Menüs
Um Einstellungen für diesen Player vornehmen zu
können, müssen Sie das SETUP-Menü aufrufen.
Nachstehend wird die grundlegende Bedienung des
SETUP-Menüs erläutert.
Beispiel:Disc Auto-Wiedergabe einrichten
Einige Funktionen können während der Wiedergabe
nicht eingerichtet werden. Drücken Sie in diesem
Fall , um die Wiedergabe vor der Einstellung
vollständig anzuhalten.
1. Rufen Sie das SETUP-Menü auf.
Drücken Sie SETUP, um das SETUP-Menü
aufzurufen.
Drücken Sie 2/3, um Allgemeine Einstellungen
auszuwählen, und drücken Sie dann ENTER oder a.
2. Wählen Sie ein Untermenü aus.
Drücken Sie 5/a, um Wiedergabe auszuwählen,
und drücken Sie dann ENTER oder den Cursor 3.
3. Wählen Sie einen Menüpunkt aus.
Drücken Sie 5/a, um Disc Auto-Wiedergabe
auszuwählen, und drücken Sie dann ENTER oder
den Cursor 3.
4. Wählen Sie einen gewünscht
Einstellung aus.
Drücken Sie 5/a, um Ein oder Aus zu wählen, und
drücken Sie dann ENTER.
Unter gewissen Menüpunkten müssen Ziffern (z.B.
ein Passwort) mit den Zifferntasten eingegeben
werden.
5. Schließen Sie das Menü.
Drücken Sie 2, um zum vorherigen Menü
zurückzukehren.
Hinweis
REPEAT A/B
AUDIO
SUBTITTLE
ANGLE
SEARCH
MIRACAST
CLEAR
PIP
HOME
2ND
AUDIO
ENTER
TOP MENU
RETURN ON SCREEN
POP-UP MENU
SETUP
STATUSSETUP
Tipp
30 De
SETUP-Menü
Allgemeine Einstellungen
Die Werkseinstellungen sind mit einem Sternchen „
*
gekennzeichnet.
System
Auto Power Standby
Aktiviert/deaktiviert die Energiesparfunktion.
Ist der Bildschirmschoner aktiviert, wechselt der Player in
den Bildschirmschonermodus, wenn 5 Minuten lang keine
Bedienung erfolgt. Erfolgt weitere 15 Minuten lang keine
Bedienung, wechselt der Player in den Bereitschaftsmodus.
Ein
*
, Aus
HDMI Steuerung
Sie können den Player auf den Empfang von Steuersignalen
über das HDMI-Kabel von einem TV/AV-Receiver einrichten,
der die Funktion HDMI Steuerung unterstützt (S. 11).
Ein, Aus
*
Werkseinstellung laden
Sie können alle Einstellungen des Players, ausgenommen
für Sicherheit, auf die Werksvorgaben zurücksetzen
(S. 31). Weitere Informationen über die Werksvorgaben
finden Sie auf den Seiten 27–34.
Upgrade
Sie können die Software manuell über USB oder
Netzwerk aktualisieren. Weitere Einzelheiten zur
Software-Aktualisierung finden Sie unter „Software-
Aktualisierung“ (S. 37).
Upgrade Information
Sie können festlegen, ob eine Meldung auf dem
Bildschirm angezeigt wird, wenn der Player neue
Software im Internet findet.
Ein
*
, Aus
3D Wiedergabe Information
Sie können die Warnmeldung hinsichtlich der 3D-
Videowiedergabe, die beim Einschalten des Players
erscheint, ein- oder ausschalten.
Ein
*
, Aus
Speichermedium
Sie können den freien Speicherplatz auf dem am Player
eingesteckten USB-Speichergerät prüfen bzw. den
„BUDA“-Ordner im USB-Speichergerät formatieren
(leeren), indem Sie Format auswählen.
Um die BD-Live-Funktion (S. 26) benutzen zu
können, müssen Sie ein USB-Speichergerät mit
mindestens 2 GB freien Speicherplatz an einem der
USB-Anschlüsse (vorn/hinten) des Players
einstecken, sodass es als Speichermedium benutzt
werden kann.
Einfaches Konfigurationsmenü
Sie können Einfaches Konfigurationsmenü ausführen
(S. 18).
Sprache
OSD
Sie können die Sprache für die Bildschirmanzeige
auswählen. Hierbei handelt es sich um die Meldungen
oder Menüs, die auf dem Bildschirm angezeigt werden,
z.B. das SETUP-Menü.
English, Français, Español, Deutsch, Italiano, Svenska,
Nederlandse, Polski, Pyccкий, 中文
Benutzung der Funktion HDMI Steuerung
Mit der Funktion HDMI Steuerung können Sie den
Player und Ihren TV (falls dieser die Funktion HDMI
Steuerung unterstützt) interaktiv bedienen.
Wenn Sie den Player mittels HDMI-Kabel an einen TV
anschließen, der die Funktion HDMI Steuerung
unterstützt, und HDMI Steuerung im SETUP-Menü
aktivieren (S. 30), können Sie die unten aufgeführten
Funktionen verwenden.
• Automatische Eingangswahlfunktion
Wenn Sie die Wiedergabe dieses Players starten, wird
die Eingangswahl des Fernsehers (sowie eines AV-
Receivers, über den der Fernseher ggf. angeschlossen
ist) automatisch auf diesen Player eingestellt. Der
Fernseher wird ggf. automatisch eingeschaltet.
• Automatisches Ausschalten
Wenn der Fernseher ausgeschaltet wird, während die
Wiedergabe des Players gestoppt ist, und das SETUP-
Menü nicht angezeigt wird, wird der Player ebenfalls
automatisch ausgeschaltet.
Je nach dem Fernseher funktioniert die Funktion
HDMI Steuerung eventuell nicht richtig.
Je nach Fernseher und AV-Receiver sind andere
als die oben erwähnten Funktionen verfügbar.
Um die Funktion HDMI Steuerung verfügbar zu
machen, nehmen Sie entsprechende Einstellungen
an ALLEN Komponenten (Player, TV und AV-
Receiver) vor. Gewisse zusätzliche
Bedienungsvorgänge können erforderlich sein.
Abhängig vom Fernseher können einzelne
Funktionen separat aktiviert bzw. deaktiviert
werden.
Näheres zum Einstellen des Fernsehers und/oder
AV-Receivers finden Sie in den mitgelieferten
Bedienungsanleitungen.
Ist die Funktion HDMI Steuerung aktiviert, erhöht
sich die Leistungsaufnahme im
Bereitschaftsmodus.
Hinweise
Tipp
31 De
SETUP-Menü
Einstellungen
4
Deutsch
Menü
Sie können die Priorität der Sprache für das Discmenü
festlegen.
English, Français,
中文
, Español, Deutsch, Italiano,
Nederlandse, Portugiesisch, Dänisch, Svenska, Finnisch,
Norwegisch, Polski,
Pyccкий
, Koreanisch, Japanisch, Weitere
Audio
Sie können die Priorität der Audiosprache für die Blu-ray
Disc-/DVD-Wiedergabe festlegen. Weitere Informationen
dazu finden Sie unter „Menü“ (S. 31).
Untertitel
Sie können die Priorität der Sprache für die Untertitel
festlegen.
English, Français,
中文
, Español, Deutsch, Italiano, Nederlandse,
Portugiesisch, Dänisch, Svenska, Finnisch, Norwegisch, Polski,
Pyccкий
, Koreanisch, Japanisch, Weitere, Aus
(Die Standardeinstellungen unter Sprache hängen vom
Modell ab.)
Wiedergabe
Disc Auto-Wiedergabe
Sie können Disc Auto-Wiedergabe aktivieren oder
deaktivieren. Bei Aktivierung wird die Disc nach dem
Laden automatisch wiedergegeben.
Ein
*
, Aus
Kamerawinkel
Sie können festlegen, ob bei der Wiedergabe von Blu-ray
Disc/DVD mit mehreren Blickwinkeln Kamerawinkel
( ) angezeigt wird.
Ein
*
, Aus
Bild im Bild Anzeige
Sie können festlegen, ob die Bild im Bild Anzeige ( )
angezeigt werden soll, wenn eine Blu-ray Disc mit der
Funktion Bild im Bild (S. 26) wiedergegeben wird.
Ein
*
, Aus
Zweittonauswahl
Sie können festlegen, ob die Zweittonauswahl ( )
angezeigt werden soll, wenn eine Blu-ray Disc mit
Zweitton wiedergegeben wird.
Ein
*
, Aus
Last Memory
Sie können festlegen, ob der Player beim Schalten in den
Bereitschaftsmodus oder beim Öffnen der Disclade die
zuletzt wiedergegebene Stelle einer Disc (Blu-ray oder
DVD-Video) speichert.
Ein
*
, Aus
Manche Discs sind mit dieser Funktion inkompatibel.
DivX (R) VOD-DRM
Sie können den Registrierungscode für DivX(R)-Video anzeigen.
Dvix Untertitel
Sie können festlegen, ob für DivX(R)-Video ein Untertitel
angezeigt wird.
Ein, Aus
*
Sicherheit
Passwort ändern
Sie können das Passwort für die Änderung der
Altersbegrenzungsstufe und des Ländercodes einrichten.
Siehe „Alterskontrolle“ (S. 31) und „Ländercode“ (S. 31).
Das Standardpasswort lautet 0000.
Sollten Sie Ihr Passwort vergessen haben, sehen Sie
unter„Fehlersuche“ nach (S. 38) und setzen Sie alle
Sicherheit-Einstellungen auf die Werksvorgaben zurück.
Alterskontrolle
Manche Blu-ray Discs/DVDs sind mit einer
Altersbegrenzungsstufe für die Wiedergabe versehen. Sie
können die auf dem Bildschirm angezeigte Alterskontrolle
je nach Discinhalt einrichten.
Das Passwort (siehe „Passwort ändern“ auf S. 31) muss
eingegeben werden, bevor die Stufen für die
Alterskontrolle eingerichtet werden können.
Nachdem Sie die Alterskontrolle eingerichtet haben, erscheint
ein Dialogfeld, wenn Sie eine Disc mit einer höheren Stufe als
der aktuellen Stufe für die Alterskontrolle wiedergeben oder
wenn Sie die Altersbegrenzungsstufe ändern. In diesem
Dialogfeld werden Sie aufgefordert, ein Passwort einzugeben.
Aus*, 1–8
Ländercode
Sie können den Ländercode für das Land einrichten, in dem
Sie wohnen. Das Passwort (siehe „Passwort ändern“ auf S. 31)
muss eingegeben werden, bevor der Ländercode eingerichtet
wird. Diese Einstellung kann für die Einstufung der
Alterskontrolle und die Disc-Wiedergabe verwendet werden.
Netzwerk
Verbindungseinstellungen
Sie können ein Verfahren für die Netzwerkverbindung auswählen.
Information
Sie können einen Bildschirm mit Netzwerkinformationen
anzeigen. Auf diesem Bildschirm können Sie die
Informationen für Interface (Ethernet), Adressentyp, IP
Adresse, Subnetzmaske, Standard Gateway und DNS ansehen.
Hinweis
Hinweise
Kabell
gebunden*
Verbindet sich über Ethernet mit dem Netzwerk.
Drahtlos Verbindet sich über ein WLAN mit dem Netzwerk.
Sie können die Einstellungen für eine WLAN-
Verbindung festlegen. Befolgen Sie die
Anweisungen auf dem Bildschirm, um fortzufahren.
Suche
Sucht nach einem Zugangspunkt. Sie können eine
Verbindung mit dem gefundenen Zugangspunkt herstellen.
Manuell
Sie können manuell die Informationen für einen
Zugangspunkt festlegen.
Auto
Wenn Ihr Zugangspunkt die Funktion WPS (Wi-Fi
Protected Setup) unterstützt, können Sie die
automatische Einstellung ausführen, um den Player
ohne manuelle Eingabe von Netzwerkinformationen
mit dem Zugangspunkt zu verbinden. Wählen Sie
PBC (Push Button Configuration) oder PIN code.
32 De
SETUP-Menü
Verbindungstest
Sie können einen Internetanschlusstest durchführen. Sollte
der Test fehlschlagen, prüfen Sie „IP Einstellungen“
(S. 32) und führen Sie den Test erneut durch.
IP Einstellungen
Sie können die Netzwerkeinstellungen konfigurieren.
Numeric keys r die Eingabe.
2/3 Ändert die Hervorhebung.
CLEAR Zum Löschen von Zeichen.
ENTER Zum Speichern von Einstellungen
und Beenden des Menüs.
Proxy-Einstellung
Sie können die Proxy-Einstellung einrichten. Wählen Sie
Deaktivieren für den normalen Gebrauch. Wählen Sie
Aktivieren, um die Proxy-Einstellung vorzunehmen.
Netzwerksterung
Richtet die Steuerung für Geräte, die über Ethernet
angeschlossen sind, auf Ein/Aus ein. Wenn Mit Filter
aktiviert ausgewählt ist, können Sie die MAC-Adresse der
Netzwerkgeräte angeben, die auf den Player Zugriff haben
dürfen. Dieser Player setzt Yamaha Netzwerksterung
Protokoll (YNC) ein.
Ein
*
, Mit Filter aktiviert, Aus
Wenn Netzwerksterung aktiviert ist, erhöht sich die
Leistungsaufnahme während des Bereitschaftsmodus
aufgrund der Netzwerkkontrollfunktion.
Bei der Einstellung Ein fällt die für den Systemstart
benötigte Zeit.
Netzwerkstandby
Sie können festlegen, ob der Player durch andere
Netzwerkgeräte wie „AV CONTROLLER“ (S. 22)
eingeschaltet werden kann.
Ein, Aus
*
Diese Einstellung ist nur verfügbar, wenn
Netzwerksterung aktiviert ist.
DMC-Steuerung
Sie können festlegen, ob DLNA-kompatible Digital Media
Controller (DMC) (S. 15) den Player steuern dürfen.
Aktivieren
*
, Deaktivieren
BD-Live-Verbindung
Sie können Zugriffsbeschränkungen auf BD-Live-Inhalte einrichten.
Anzeige Einstellung
Die Werkseinstellungen sind mit einem Sternchen „
*
“ gekennzeichnet.
TV
3D Ausgang
Sie können zwischen 3D- oder 2D- Videoausgabe wählen.
Auch wenn Sie „3D Ausgang“ auf „Auto“ eingestellt haben,
kann der Player bei der Wiedergabe einer Blu-ray 3D-Disc
2D-Bilder wählen – dies hängt u.a. von der TV-Einstellung ab.
TV Bildschirm
Sie können das Bildseitenverhältnis des angeschlossenen
Fernsehers auswählen und den Videoausgang einstellen.
Falls sich das Bildseitenverhältnis des angeschlossenen Fernsehers
geändert hat (z.B. weil Sie ein neues TV-Gerät erworben haben),
müssen Sie die TV Bildschirm-Einstellung ändern.
Auto* Wählen Sie diese Option zur automatischen
Konfiguration der Netzwerkeinstellungen dieses
CD-Players mit dem DHCP-Server.
Manuell
Wählen Sie diese Option zur manuellen Konfiguration
der Netzwerkeinstellungen (IP Adresse,
Subnetzmaske, Standard Gateway und DNS).
Tipps
Deaktivieren
*
Mit dieser Option wird der Proxy-Server deaktiviert.
Wählen Sie diesen Gegenstand aus, wenn der Proxy-
Server nicht verwendet wird.
Aktivieren Aktiviert den Proxy-Host und die Proxy-
Anschlusseinstellung.
Proxy Host Richtet den Proxy Host ein.
Proxy Port Richtet den Proxy-Anschluss ein.
Hinweise
Hinweis
Erlaubt Dies erlaubt allen BD-Live-Discs eine Verbindung
zum Netzwerk aufzubauen.
Teilweise erlaubt
*
Lässt nur Discs mit Besitzer-Zertifizierung zu.
Verboten Dies verweigert allen BD-Live-Discs eine
Verbindung zum Netzwerk.
Auto*
Der Player wählt automatisch zwischen 3D- und 2D-Videos aus.
Aus Der Player wählt immer 2D-Videos aus.
Hinweis
16:9 Voll Wählen Sie diese Option aus, wenn der Player an
einen Fernseher mit einem Bildseitenverhältnis von
16:9 angeschlossen ist. Wenn ein Video mit einem
Bildseitenverhältnis von 4:3 wiedergegeben wird,
erfolgt die Wiedergabe wie unten angegeben.
16:9 Normal
*
Wählen Sie diese Option aus, wenn der Player an
einen Fernseher mit einem Bildseitenverhältnis von
16:9 angeschlossen ist. Wenn ein Video mit einem
Bildseitenverhältnis von 4:3 wiedergegeben wird,
erfolgt die Wiedergabe wie unten angegeben.
4:3 Pan Scan Wählen Sie diese Option aus, wenn der Player an
einen Fernseher mit einem Bildseitenverhältnis von
4:3 angeschlossen ist. Wenn ein Video mit einem
Bildseitenverhältnis von 16:9 wiedergegeben wird,
erfolgt die Wiedergabe wie unten angegeben.
4:3 Letterbox Wählen Sie diese Option aus, wenn der Player an
einen Fernseher mit einem Bildseitenverhältnis von
4:3 angeschlossen ist. Wenn ein Video mit einem
Bildseitenverhältnis von 16:9 wiedergegeben wird,
erfolgt die Wiedergabe wie unten angegeben.
Original-
Bildgröße
Auf einem 16:9-Fernseher (Breitbild)
16:9 Voll 16:9 Normal
4:3
Original-
Bildgröße
Auf einem 4:3-Fernseher
4:3 Pan Scan 4:3 Letterbox
16:9
33 De
SETUP-Menü
Einstellungen
4
Deutsch
Auflösung HDMI
Sie können die Auflösung des HDMI-Videoausgangs
festlegen. Weitere Informationen über die
Ausgabeformate finden Sie unter „Informationen über
Videoausgangsformate“ (S. 36).
Bei der Einstellung Auto wird die für den
angeschlossenen Fernseher maximale Auflösung
eingerichtet.
Bei der Einstellung Native Diskwiedergabe werden die
ursprüngliche Auflösung und Videofrequenz verwendet,
die auf der abgespielten Blu-ray Disc oder DVD
aufgezeichnet sind. Sie können eine Video-
Aufwärtswandlerfunktion eines externen Geräts
verwenden.
Wenn ein anderes Medium als eine Blu-ray Disc oder
DVD wiedergegeben wird, werden die Auflösung und
Videofrequenz auf Auto eingerichtet.
Wenn eine Blu-ray Disc oder DVD verwendet wird, deren
Auflösung und Videofrequenz nicht mit dem
angeschlossenen Fernsehgerät kompatibel sind, wird kein
Bild ausgegeben. Stoppen Sie in solchem Fall die
Wiedergabe und wählen Sie eine andere Option als Native
Diskwiedergabe.
Auto
*
, Native Diskwiedergabe, 480i/576i, 480p/576p, 720p,
1080i, 1080p
Um HD-Audio (Dolby TrueHD oder DTS-HD
Master Audio) über den HDMI-Anschluss
auszugeben, stellen Sie Auflösung HDMI auf Auto
oder höher als 720p ein.
TV-System
TV-System kann auf PAL, NTSC und Multikanal
eingestellt werden. Stellen Sie TV-System entsprechend
Ihrem Fernseher ein. Weitere Informationen über die
Ausgabeformate finden Sie unter „Informationen über
HDMI-Videoausgangsformate“ (S. 36).
Farbraum
Sie können die Farbraum-Ausgabe (S. 41) für HDMI
auswählen. Diese Funktion ist verfügbar, wenn der Player
über ein HDMI-Kabel verbunden ist.
Diese Funktion ist nur bei Fernsehern verfügbar, die
diese Funktion unterstützen.
HDMI Deep Color
Wenn Ihr TV und/oder AV-Receiver Deep Color (S. 41)
unterstützt, stellen Sie diese Gegenstand entsprechend
Ihrem TV/AV-Receiver ein. Diese Funktion ist verfügbar,
wenn der Player über ein HDMI-Kabel verbunden ist.
30 bit, 36 bit, 48 bits, Aus
*
HDMI 1080p 24Hz
BD-Video mit einer Bildrate von 24 Hz wird in HDMI
1080p 24Hz ausgegeben. Über diese Funktion kann die
Wiedergabe des Videos geglättet werden. Diese Funktion
ist nur bei TVs/AV-Receivern verfügbar, die diese
Funktion unterstützen. Weitere Informationen über die
Ausgabeformate finden Sie unter „Informationen über
HDMI-Videoausgangsformate“ (S. 36).
Auto
*
, Aus
Diese Einstellung ist deaktiviert, wenn eine andere
Ausgabeauflösung als 1080p verwendet wird.
Videokonfigurationsmenü
Rauschunterdrückung
Sie können Rauschunterdrückung auf einen Pegel
zwischen 0 und 3 einstellen. 0 bedeutet deaktiviert und 3
ist der maximale Pegel.
0, 1, 2
*
, 3
De-Interlacing Modus
Sie können auswählen, wie das Videosignal erkannt wird.
Wählen Sie Auto für den normalen Gebrauch. Wählen Sie
die Einstellung Film/Video aus, sollten horizontale
Streifen auf dem Bildschirm erscheinen.
Auto
*
, Film, Video
Untertitel
CC Attribute
Sie können die Erscheinung der geschlossenen Untertitel
einrichten. Bei der Einstellung Auto werden digitale
geschlossene Untertitel mit den Standardeinstellungen
angezeigt. Bei der Einstellung Persönlich können Sie die
Erscheinung der geschlossenen Untertitel (Schrifft Farbe,
Schrifft Grösse usw.) manuell einrichten.
Auto, Persönlich
Schrifft Farbe, Schrifft Grösse, Schrifft Style,
Schrifft Intensität, Schrifft Kanten, Font
edge color, BG color, BG opacity, Window
color, Window opacity
Richtet Schriftart, Hintergrund und Fenster der
geschlossenen Untertitel ein, wenn CC Attribute auf
Persönlich eingestellt ist.
Hinweis
NTSC, PAL, Multikanal
(Die Standardeinstellung variiert abhängig von Ihrem Modell.)
YCbCr 4:4:4
*
Stellt den Farbraum YCbCr 4:4:4 ein.
YCbCr 4:2:2 Stellt den Farbraum YCbCr 4:2:2 ein.
Voll RGB Wählen Sie diese Option aus, wenn RGB
eingerichtet ist und Weiß und Schwarz auf dem
Bildschirm zu schwach angezeigt werden. Diese
Einstellung ist effektiv, wenn ein angeschlossenes
Gerät den Bereich RGB 0–255 unterstützt.
RGB Gibt ein Videosignal im normalen Signalbereich aus.
Hinweis
Hinweis
34 De
SETUP-Menü
Audio-Einstellungen
Die Werkseinstellungen sind mit einem Sternchen „
*
gekennzeichnet.
Audio-Ausgang
Coaxial / Optical
Sie können den Ausgabemodus der COAXIAL-und
OPTICAL-Buchsen einstellen. Weitere Informationen
über die Ausgabeformate finden Sie unter „Übersicht der
Audioausgangsformate“ (S. 35).
HDMI
Sie können den Ausgabemodus des HDMI-Anschlusses
auswählen. Weitere Informationen dazu finden Sie unter
„Coaxial / Optical“ (S. 34). Weitere Informationen über die
Ausgabeformate finden Sie unter „Übersicht der
Audioausgangsformate“ (S. 35).
Bitstream
*
, PCM, Neuberechnen, Aus
Um HD-Audio (Dolby TrueHD oder DTS-HD
Master Audio) über den HDMI-Anschluss
auszugeben, stellen Sie „Auflösung HDMI“ auf
„Auto“ oder höher als „720p“ ein (S. 33).
Downsampling
Sie können die Down-Sampling-Frequenz des digitalen
Audiosignals auswählen. Diese Funktion ist für die
Audiosignalausgabe über die COAXIAL-/OPTICAL-
Buchse.
DRC
Sie können DRC (Dynamic Range Compression)
(S. 41) aktivieren/deaktivieren/auf Auto einstellen. Bei
der Einstellung Auto wird DRC automatisch aktiviert für
eine Quelle mit DRC-Informationen im Dolby TrueHD-
Format. DRC sorgt dafür, dass laute Töne, wie
beispielsweise Explosionen, geschwächt und Gespräche
besser verständlich werden. Dies ist nützlich, wenn Sie
nachts Filme anschauen.
Aus, Ein, Auto
*
SACD-Ausgang
SACD Priorität
Wählt die Wiedergabepriorität für Zweikanalinhalte oder
Mehrkanalinhalte, wenn die Disc beide Inhaltsarten
enthält.
Mehrkanal
*
, 2-Kanal
SACD/CD Layer
Legt für eine SA-CD/CD-Hybrid-Disc fest, welcher Layer
abgespielt wird.
SACD
*
, CD
Die SA-CD-Anzeige an der Vorderseite leuchtet,
wenn eine SA-CD eingelegt ist und der SA-CD-
Layer ausgewählt ist.
Diese Einstellung ist nur verfügbar, wenn keine Disc
eingelegt ist.
Während der SA-CD-Layer ausgewählt ist, werden
weder über den COAXIAL- noch den OPTICAL-
Digitalausgang (S. 13) Audiosignale ausgegeben.
Lautsprechereinstellung
2 Kanal Downmix
Sie können den analogen 2-Kanal-Downmix auf Stereo
oder Lt/Rt einstellen.
Post-Prozess
Upmix
Sie können eine Mehrkanalisierung des 2-Kanal-
Audiosignals durchführen. Um eine Mehrkanalisierung
vorzunehmen, wählen Sie DTS NEO:6 und dann den
Kino- oder Musik-Modus.
Aus
*
, DTS NEO:6
Systeminformation
Software-Version und MAC-Adresse (S. 42) werden
angezeigt.
Bitstream Gibt ein digitales Signal ohne Verarbeitung aus.
Der Zweitton wird nicht ausgegeben.
PCM Gibt 2-Kanal-PCM aus.
Neuberechnen
*
Gibt Bitstream mit Zweitton aus.
Aus Schaltet den Ton auf stumm.
Hinweis
48K
*
Die höchste Sampling-Rate der digitalen PCM-
Ausgabe beträgt 48 kHz.
96K Die höchste Sampling-Rate der digitalen PCM-
Ausgabe beträgt 96 kHz.
192K Die höchste Sampling-Rate der digitalen PCM-
Ausgabe beträgt 192 kHz.
Tipp
Hinweise
Stereo
*
Ändert die Kanalausgabe auf Stereo, wodurch nur
Ton aus den beiden Frontlautsprechern ausgegeben
wird.
Lt/Rt Wählen Sie diese Option, wenn das Gerät mit einem
Dolby Pro Logic-Decoder verbunden ist. Der Ton
aus den hinteren Lautsprechern wird auf 2-Kanal-
Stereoton gemischt.
35 De
SETUP-Menü
Einstellungen
4
Deutsch
Übersicht der Audioausgangsformate
*1 „ZT“ steht für Zweitton. „MTT“ steht für Maustastenton, d. h. der Ton, der beim Öffnen von Popup-Menüs, usw.
ausgegeben wird.
*2 PCM und 2-Kanal-Mix sind für USB, DLNA und Netzwerkdienste nicht verfügbar (stumm geschaltet).
*3 Neuberechnen ist für USB, DLNA und Netzwerkdienste nicht verfügbar (der Audioausgang hat dasselbe Format wie
Bitstream).
Wenn Coaxial / Optical oder HDMI auf Bitstream eingestellt ist, wird kein Zweitton ausgegeben. (S. 34)
Um HD-Audio (Dolby TrueHD oder DTS-HD Master Audio) am HDMI-Anschluss auszugeben, stellen Sie
Auflösung HDMI auf Auto oder höher als 720p ein (S. 33).
SA-CD-Ausgangsformate
Quellformat
HDMI COAXIAL / OPTICAL MIXED 2CH
Bitstream PCM
Neuberechnen
Bitstream PCM
Neuberechnen
PCM 2-Kanal
mit ZT oder
MTT
*1
PCM 2-Kanal Dolby Digital PCM 2-Kanal Dolby Digital 2-Kanal
ohne ZT oder
MTT
*1
PCM 2-Kanal PCM 2-Kanal 2-Kanal
PCM
5.1-Kanal
mit ZT oder
MTT
*1
PCM 5.1-Kanal Dolby Digital PCM 2-Kanal Dolby Digital 2-Kanal
ohne ZT oder
MTT
*1
PCM 5.1-Kanal PCM 2-Kanal 2-Kanal
PCM
7.1-Kanal
mit ZT oder
MTT
*1
PCM 7.1-Kanal Dolby Digital PCM 2-Kanal Dolby Digital 2-Kanal
ohne ZT oder
MTT
*1
PCM 7.1-Kanal PCM 2-Kanal 2-Kanal
Dolby Digital
mit ZT oder
MTT
*1
Dolby Digital
PCM bis
5.1-Kanal
Dolby Digital Dolby Digital PCM 2-Kanal Dolby Digital 2-Kanal
ohne ZT
oder
MTT
*1
Dolby Digital
Plus
mit ZT oder
MTT
*1
Dolby Digital
Plus
PCM bis
7.1-Kanal
Dolby Digital
Dolby Digital PCM 2-Kanal Dolby Digital 2-Kanal
ohne ZT
oder
MTT
*1
Dolby Digital
Plus
Dolby
TrueHD
mit ZT oder
MTT
*1
Dolby
TrueHD
PCM bis
7.1-Kanal
Dolby Digital
Dolby Digital PCM 2-Kanal Dolby Digital 2-Kanal
ohne ZT
oder
MTT
*1
Dolby
TrueHD
DTS
mit ZT oder
MTT
*1
DTS
PCM bis
5.1-Kanal
*2
DTS
*3
DTS
PCM
2-Kanal
*2
DTS
*3
2-Kanal
*2
ohne ZT
oder
MTT
*1
DTS HD High
Resolution
mit ZT oder
MTT
*1
DTS-HD High
Resolution
PCM bis
7.1-Kanal
*2
DTS
*3
DTS
PCM
2-Kanal
*2
DTS
*3
2-Kanal
*2
ohne ZT
oder
MTT
*1
DTS HD High
Resolution
*3
DTS-HD
Master Audio
mit ZT oder
MTT
*1
DTS-HD
Master Audio
PCM bis
7.1-Kanal
*2
DTS
*3
DTS
PCM
2-Kanal
*2
DTS
*3
2-Kanal
*2
ohne ZT
oder
MTT
*1
DTS-HD
Master
Audio
*3
Hinweise
SACD Priorität-Einstellung (S. 34)
HDMI COAXIAL / OPTICAL
MIXED 2CH
Mehrkanal PCM bis 5.1-Kanal Keine Ausgabe 2-Kanal
2-Kanal PCM bis 2-Kanal Keine Ausgabe 2-Kanal
36 De
SETUP-Menü
Informationen über HDMI-Videoausgangsformate
Wenn TV-System auf NTSC eingestellt ist
Wenn TV-System auf PAL eingestellt ist
*1 Die Auflösung wird auf die maximal vom angeschlossenen Fernsehgerät unterstützte Auflösung gesetzt. Wenn z.B.
die maximal vom angeschlossenen Fernsehgerät unterstützte Auflösung bei 1080p liegt, wird die Auflösung auf
1080p gesetzt.
*3 Auflösung und Bildwiederholrate entsprechen der Quelldisc.
*4 Wenn HDMI 1080p 24Hz auf Auto eingestellt ist und der angeschlossene TV1080p 24Hz-Inhalt unterstützt, wird
1080p 24Hz statt 1080p 50/60Hz ausgegeben.
Wenn TV-System auf Multikanal eingestellt ist
Wenn TV-System auf Multikanal eingestellt ist, wird das Videosignal mit der gleichen Bildwiederholrate wie die Quelle
ausgegeben. Informationen über die Frequenzeinstellung des Fernsehers und die Auflösung des Ausgangsvideosignals
finden Sie in den Tabellen oben.
Die Einstellung HDMI 1080p 24Hz ist deaktiviert, wenn eine andere Ausgabeauflösung als 1080p verwendet
wird.
Wenn TV-System auf NTSC eingestellt ist und die Videoquelle nicht 60Hz ist, wird das Video-Ausgangssignal
auf 60Hz konvertiert.
Wenn TV-System auf PAL eingestellt ist und die Videoquelle nicht 50Hz ist, wird das Video-Ausgangssignal auf
50Hz konvertiert.
Inhalt
Auflösung HDMI
Auto
Native
Diskwiedergabe
1080p 1080i 720p 480p/576p 480i/576i
BD-Video mit
1080p/24Hz-Inhalt
*
1
1080p 24 Hz
1080p 24Hz/
60Hz
*3
1080i 60Hz 720p 60Hz 480p 480i
BD-Video ohne 1080p/
24Hz-Inhalt
*
1
*
2
1080p 60Hz 1080i 60Hz 720p 60Hz 480p 480i
DVD-Video
*
1
*
2
1080p 60Hz 1080i 60Hz 720p 60Hz 480p 480i
Andere
*
1
*
1
1080p 60Hz 1080i 60Hz 720p 60Hz 480p 480i
Inhalt
Auflösung HDMI
Auto
Native
Diskwiedergabe
1080p 1080i 720p 480p/576p 480i/576i
BD-Video mit
1080p/24Hz-Inhalt
*
1
1080p 24 Hz
1080p 24Hz/
50Hz
*3
1080i 50Hz 720p 50Hz 576p 576i
BD-Video ohne 1080p/
24Hz-Inhalt
*
1
*
2
1080p 50Hz 1080i 50Hz 720p 50Hz 576p 576i
DVD-Video
*
1
*
2
1080p 50Hz 1080i 50Hz 720p 50Hz 576p 576i
Andere
*
1
*
1
1080p 50Hz 1080i 50Hz 720p 50Hz 576p 576i
Hinweise
37 De
Deutsch
Einstellungen
4
Neue Software mit zusätzlichen Merkmalen oder Produktverbesserungen erscheint nach Bedarf. Wir empfehlen die
Software des Players regelmäßig zu aktualisieren.
Ob ein Software-Aktualisierung verfügbar ist, erfahren Sie auf der Seite:
http://download.yamaha.com/
Entnehmen Sie nicht das USB-Speichergerät, versetzen Sie den Player nicht in den Bereitschaftsmodus und
ziehen Sie weder Netzkabel noch LAN-Kabel, während das Software-Aktualisierung durchgeführt wird.
Aktualisierung der Software
1. Bereiten Sie sich auf das
Software-Aktualisierung vor.
Bei Aktualisierung der Software über USB:
1 Speichern Sie die Upgrade-Dateien im
entsprechenden Ordner auf dem USB-
Speichergerät. Weitere Einzelheiten finden Sie
im Dokument, das mit den Upgrade-Dateien
geliefert wird.
2 Stecken Sie das USB-Speichergerät ein.
Bei Aktualisierung der Software über das Netzwerk:
Stellen Sie sicher, dass der Player mit dem
Netzwerk verbunden ist.
2. Wählen Sie die
Aktualisierungsmethode aus und
starten Sie den Vorgang über das
SETUP-Menü.
1 Drücken Sie SETUP, um das SETUP-Menü
aufzurufen.
2 Wählen Sie Allgemeine Einstellungen = System
= Upgrade.
3 Wählen Sie USB/Netzwerk als die Quelle der
Upgrade-Dateien.
Das System sucht nach Upgrade-Dateipaketen.
3. Aktualisieren Sie die Software,
indem Sie die Meldungen auf dem
Bildschirm befolgen.
Das Upgrade ist abgeschlossen. Das System wird
zurückgesetzt.
Software-Aktualisierung
Hinweis
38 De
ZUSÄTZLICHE INFORMATIONEN
Suchen Sie eine Lösung aus der unten angegebenen Tabelle, wenn dieser Player nicht richtig funktionieren sollte. Falls
Ihr Problem nicht hier aufgeführt ist oder die vorgeschlagene Lösung nicht abhilft, schalten Sie den Player aus, ziehen
Sie das Netzkabel ab und wenden Sie sich an den nächsten Yamaha Händler oder Kundendienst.
Strom
Grundlegende Bedienung
Disc-Wiedergabe
Fehlersuche
Problem Mögliche Ursache und Lösung
Kein Spannungsversorgung. Schließen Sie das Netzkabel richtig an.
Drücken Sie p an der Vorderseite, um die Stromversorgung einzuschalten.
Die Stromversorgung des Players
schaltet sich aus.
Wenn Auto Power Standby (S. 30) aktiviert ist, schaltet sich der Player automatisch aus,
wenn 20 Minuten lang keine Aktivität (Wiedergabe) stattfindet.
Problem Mögliche Ursache und Lösung
Die Fernbedienung funktioniert nicht. Benutzen Sie die Fernbedienung innerhalb ihres Wirkungsbereichs. (S. 10)
Wechseln Sie die Batterien aus. (S. 10)
Prüfen Sie die ID-Einstellungen für das Hauptgerät und die Fernbedienung. Die
Fernbedienungs-ID des Hauptgeräts kann geändert werden, nachdem das Hauptgerät
zurückgesetzt wurde. Überprüfen Sie in diesem Fall die Fernbedienungs-ID am
Hauptgerät, und legen Sie sie bei Bedarf erneut fest. (S. 10)
Die Tasten funktionieren nicht.
Halten Sie p an der Vorderseite mindestens fünf Sekunden lang gedrückt, um den
Player zurückzusetzen.
Um diesen Player vollständig zurückzusetzen, trennen Sie das Netzkabel etwa 30
Sekunden lang von der Steckdose, stecken Sie dann das Netzkabel wieder an der
Wandsteckdose ein und schalten Sie den Player ein.
Das Passwort wurde vergessen. Stellen Sie sicher, dass sich keine Disc im Laufwerk befindet und dass die Wiedergabe
gestoppt ist. Halten Sie dann gleichzeitig , und an der Vorderseite
gedrückt, um alle Einstellungen, einschließlich den Einstellungen für Sicherheit (S. 31),
des Players auf die Werksvorgaben zurückzusetzen. Nachdem sich die
Stromversorgung automatisch abgeschaltet hat, drücken Sie p, um sie wieder
einzuschalten.
Problem Mögliche Ursache und Lösung
Der Player kann die Disc nicht
wiedergeben.
Nehmen Sie die Disc heraus und reinigen Sie sie. (S. 5)
Vergewissern Sie sich, dass die Disc korrekt eingelegt ist (in der Disclade zentriert und
mit der Beschriftung nach oben). (S. 5)
Verwenden Sie eine Disc, die vom Player unterstützt wird. (S. 3)
Entnehmen Sie die Disc und prüfen Sie, ob der Player die Disc unterstützt. (S. 3)
Prüfen Sie den Regionalcode. (S. 3)
Prüfen Sie, ob die Disc defekt ist, indem Sie eine andere Disc ausprobieren.
CD-R/RW, DVD+R/RW/R DL und DVD-R/RW/R DL müssen finalisiert sein. (S. 3)
Video stoppt. Der Player stoppt, wenn er Erschütterungen oder Vibrationen erkennt.
Der Player erzeugt beim
Wiedergabestart oder beim Einlegen
einer Disc ein Schnappgeräusch.
Diese Geräusche sind normale Betriebsgeräusche und kein Hinweis auf eine Störung.
Der Beginn der Blu-ray Disc-Wiedergabe
ist verzögert.
Wenn eine Blu-ray Disc geladen wird, sucht der Player nach einem USB-Speichergerät,
das als Speichermedium für die BD-Live-Funktion (S. 26) verwendet wird. Um die
Verzögerung zu verkürzen, lassen Sie jederzeit ein USB-Speichergerät an einem der
USB-Anschlüsse (vorn/hinten) des Players eingesteckt (S. 16).
39 De
Fehlersuche
Deutsch
Zusätzliche Informationen
5
Bild
Ton
Netzwerk
Problem Mögliche Ursache und Lösung
Kein Bild. Vergewissern Sie sich, dass die Kabel korrekt angeschlossen sind. (S. 11)
Vergewissern Sie sich, dass der angeschlossene Fernseher oder AV-Receiver auf den
korrekten Eingang eingestellt ist.
Halten Sie und an der Vorderseite gleichzeitig gedrückt, um die
Videoauflösung auf den Standardwert einzustellen, während keine Disc eingelegt ist
bzw. die Wiedergabe gestoppt wurde.
Falls immer noch kein Bild ausgegeben wird, halten Sie an der Vorderseite etwa
fünf Sekunden lang gedrückt, um NTSC/PAL umzuschalten.
Bei der Einstellung Native Diskwiedergabe wird ein Signal ausgegeben, das der
verbundene TV nicht unterstützt. Ändern Sie die Einstellung zur Ausgabe eines Signals,
das mit dem angeschlossenen Fernsehgerät kompatibel ist. (S. 33)
Vergewissern Sie sich, dass die wiederzugebende Disc oder vom Player unterstützt wird (S. 3).
Bildschirm blockiert und die
Bedienungstasten sind wirkungslos.
Drücken Sie und starten Sie dann erneut die Wiedergabe.
Schalten Sie die Stromversorgung aus und wieder ein.
Halten Sie p an der Vorderseite mindestens fünf Sekunden lang gedrückt, um den
Player zurückzusetzen.
Das Video wird nicht in der
gewünschten Auflösung
wiedergegeben.
Stellen Sie die gewünschte Auflösung ein. (S. 33)
Breitbild-Video erscheint vertikal gedehnt,
oder schwarze Balken erscheinen am
oberen und unteren Bildrand. Video mit
4:3-Format erscheint horizontal gedehnt.
Ändern Sie das Bildseitenverhältnis Ihres Fernsehers. (S. 32)
Rechteckrauschen (Mosaik) erscheint
auf dem Bildschirm.
Bei Szenen, die schnelle Bewegungen enthalten, können aufgrund der Eigenschaften
des digitalen Bildkomprimierungsverfahrens mosaikartige Blöcke im Bild sichtbar sein.
Problem Mögliche Ursache und Lösung
Kein Ton oder der Ton ist verzerrt. Prüfen Sie, ob das Audiokabel korrekt angeschlossen ist. (S. 11)
Drehen Sie die Lautstärke Ihres Fernsehers oder AV-Receivers hoch.
Bei Standbildwiedergabe sowie beim Vor- und Rücklauf erfolgt keine Tonwiedergabe.
(S. 9)
Je nach Zustand der Audioaufzeichnung, z.B. wenn ein anderer Ton als ein Audiosignal
oder ein nicht standardgemäßes Audiosignal als Audioinhalt aufgezeichnet ist, erfolgt u.
U. keine Tonausgabe. (S. 3)
Vergewissern Sie sich, dass die wiederzugebende Disc oder Datei vom Player
unterstützt wird (S. 3).
Der linke und rechte Tonkanal sind
vertauscht oder der Ton wird nur auf
einer Seite ausgegeben.
Prüfen Sie den Audio-Anschluss. (S. 13)
Ton nicht im gewünschten Audioformat
und/oder Anzahl Kanäle.
Siehe Audio-Ausgang-Einstellung und „Übersicht der Audioausgangsformate“. (S. 34, S. 35)
Der Ton der Funktion Bild im Bild
(Zweitton) ist nicht hörbar.
Stellen Sie Coaxial / Optical oder HDMI auf PCM/Neuberechnen ein. (S. 34)
Um den Zweitton hören zu können, drücken Sie 2ND AUDIO. (S. 8)
Je nach Disc müssen Sie die Funktion der Zweitton-Wiedergabe im Top-Menü der Disc
aktivieren (S. 9).
Problem Mögliche Ursache und Lösung
Internet-Verbindung nicht herstellbar. Wenn Sie eine Verbindung zum Internet herstellen, indem Sie Kabell gebunden unter
Verbindungseinstellungen auswählen, schließen Sie das Netzwerkkabel
ordnungsgemäß an. (S. 31)
Schalten Sie das angeschlossene Gerät, wie beispielsweise einen Breitband-Router oder
ein Modem, ein.
Schließen Sie den Breitband-Router und/oder das Modem richtig an.
Wenn Verbindungseinstellungen auf Drahtlos eingestellt ist und Sie eine Internetverbindung
über Ethernet herstellen möchten, wählen Sie Kabell gebunden aus. (S. 31)
Wenn Sie die Internetverbindung über ein WLAN herstellen möchten, stellen Sie
Verbindungseinstellungen dementsprechend auf Drahtlos ein. (S. 31)
40 De
Fehlersuche
Meldungen auf dem Bildschirm
Die folgenden Meldungen erscheinen auf dem Fernsehschirm, falls die Disc, die Sie abspielen wollen, ungeeignet
ist oder eine falsche Bedienung erfolgt.
BD-Live-Inhalte können nicht
heruntergeladen werden.
Überprüfen Sie, ob sich dieser Player normal mit dem Internet verbinden kann. Siehe
„Verbindungstest“. (S. 32)
Stecken Sie ein USB-Speichergerät sachgemäß ein. Prüfen Sie, ob ein USB-
Speichergerät am USB-Anschluss des Players eingesteckt ist. (S. 16)
Prüfen Sie, ob die Blu-ray Disc BD-Live unterstützt.
Stecken Sie ein FAT16-, FAT32- oder NTFS-formatiertes USB-Speichergerät ein.
Es wird empfohlen, ein USB-Speichergerät mit einem Mindestspeicherplatz von 2 GB
zu benutzen. Formatieren Sie das USB-Speichergerät, wenn nicht genügend
Speicherplatz vorhanden ist. (S. 30)
Sehen Sie in der mitgelieferten Bedienungsanleitung der Disc nach oder fragen Sie den
Hersteller.
Der DLNA-Server wird nicht erkannt. Überprüfen Sie, ob sich dieser Player normal mit dem Netzwerk verbinden kann. Siehe
„Verbindungstest“. (S. 32)
Schalten Sie das angeschlossene Gerät, wie beispielsweise einen Breitband-Router oder
den Server, ein.
Bestätigen Sie, dass Player und Server mit dem gleichen Router (Zugangspunkt)
verbunden sind.
Der Player muss von gewissen DLNA-Servern zugelassen werden.
Bei gewissen DLNA-Servern muss eine Firewall-Einstellung geändert werden.
Eine Wiedergabe der Datei auf dem
DLNA-Server ist nicht möglich.
Stellen Sie sicher, dass die Datei abspielbar ist. (S. 3)
Prüfen Sie die DLNA-Server-Einstellungen.
Die Wiedergabe und Bedienungsqualität können vom Zustand des Heimnetzwerkes
beeinträchtigt werden.
Internet-Verbindung über WLAN nicht
herstellbar.
Stellen Sie sicher, dass der WLAN-Router eingeschaltet ist.
In Abhängigkeit der Einsatzbedingungen wie Wandmaterial, Funkwellen-Empfangszustand oder
Hindernisse zwischen Player und WLAN-Router kann sich die Kommunikationsreichweite
verkürzen. Bringen Sie den Player und den WLAN-Router näher zusammen.
Geräte, die den 2,4-GHz-Frequenzbereich verwenden, wie z.B. Mikrowellen-, Bluetooth-
oder kabellose Digitalgeräte, können die Kommunikation unterbrechen. Stellen Sie den
Player weiter entfernt von solchen Geräten auf oder schalten Sie solche Geräte aus.
Wenn die Internetverbindung über ein WLAN auch anhand der beiden oben aufgeführten
Lösungen nicht erfolgreich hergestellt werden kann, versuchen Sie mit einer Ethernet-
Verbindung, indem Sie Verbindungseinstellungen auf Kabell gebunden einstellen. (S. 31)
Das WLAN wird nicht gefunden oder der
Empfang ist gestört.
Stellen Sie sicher, dass der WLAN-Router eingeschaltet ist.
Bringen Sie Player und Router näher zusammen oder ändern Sie die Ausrichtung des
Players oder der Routerantenne.
Wenn die Drahtlosverbindung nicht mit der WPS-Funktion eingerichtet werden kann,
wählen Sie eine andere Option (Suche oder Manuell) (S. 18).
Stellen Sie sicher, dass das WLAN nicht durch Mikrowellengeräte, digitale
Schnurlostelefone oder benachbarte Wi-Fi-Geräte gestört wird.
In der Nachbarschaft benutzte Mikrowellengeräte, digitale Schnurlostelefone oder
andere Drahtlosgeräte können das WLAN stören. Schalten Sie solche Geräte aus.
Stellen Sie sicher, dass die Firewall in Ihrem Netzwerk einen Zugriff durch den Player
auf die Drahtlos-Verbindung zulässt.
Wenn das WLAN nicht ordnungsgemäß funktioniert, versuchen Sie es mit einer
kabelgebundenen Netzwerkverbindung.
Fehlermeldung Mögliche Ursache und Lösung
Nicht unterstütztes Format Die Datei wird vom Player nicht unterstützt. Siehe „Mit diesem Player kompatible
Discs/Dateien“ (S. 3).
Falscher Regionalcode! Die Disc hat einen inkompatiblen Regionalcode. Siehe „Informationen über die
Regionalcodes für Blu-ray Disc-/DVD-Videos“ (S. 3).
Netzwerkfehler. Der Player kann nicht mit dem Netzwerk verbunden werden. Prüfen Sie die Verbindung
(S. 14) und die Netzwerk-Einstellung (S. 31).
Netzwerk ist OK, Proxyfehler. Der Player kann nicht mit dem Proxy-Server verbunden werden. Siehe „Proxy-
Einstellung“ (S. 32).
BD-Live Verbindung im Setup nicht
aktiviert SETUP-Menü
Die BD-Live Verbindung ist nicht zugelassen. Siehe „BD-Live-Verbindung“ (S. 32).
Upgrade konnte nicht ausgeführt werden.
Das Upgrade ist fehlgeschlagen. Prüfen Sie, ob die Upgrade-Datei beschädigt oder unlesbar ist.
IP-Einstellungen sind nicht passende,
bitte machen Sie einen reset.
Die eingegebene IP-Einstellung ist nicht gültig. Geben Sie die korrekten Informationen
erneut ein.
Problem Mögliche Ursache und Lösung
41 De
Deutsch
Zusätzliche Informationen
5
AVCHD
AVCHD ist ein neues Format (Standard) für HD-
Camcorder zur Aufzeichnung und Wiedergabe von
hochauflösenden Videobildern.
BD-Live™
BD-Live ist ein Blu-ray Disc-Standard, der dem Player
über eine Netzwerkverbindung ermöglicht Werbevideos
und andere Daten aus dem Internet herunterzuladen.
BDMV
BDMV (Blu-ray Disc Movie) bezeichnet eines der bei
BD-ROM verwendeten Anwendungsformate in den
Blu-ray-Disc-Spezifikationen. BDMV ist ein
Aufnahmeformat, das dem DVD-Video in der DVD-
Spezifikation entspricht.
Blu-ray 3D™
Blu-ray 3D erlaubt Ihnen das Abspielen
hochauflösender 3D-Bilder.
BONUSVIEW™
BONUSVIEW-kompatible Discs erlauben Ihnen den
gleichzeitigen Genuss eines Video-Unterkanals für zwei
Bildschirme, eines Audio-Unterkanal und von
Untertiteln. Innerhalb des Hauptbildschirms wird
während der Wiedergabe (Bild in Bild) ein kleiner
Bildschirm eingeblendet.
Closed Captions (geschlossene Untertitel)
Der Unterschied zwischen Untertiteln und Captions
liegt darin, dass Untertitel für hörende Menschen sind
und Captions für Hörgeschädigte. Untertitel zeigen
selten den gesamten Ton.
Captions zeigen beispielsweise auch Toneffekte (z.B.
„Das Telefon klingelt“ und „Schritte“). Bei Untertiteln
ist dies nicht der Fall. Bevor Sie diese Einstellung
auswählen, stellen Sie sicher, dass auf der Disc Closed
Captions (geschlossene Untertitel) enthalten sind.
Farbraum
Ein Farbraum ist ein darstellbarer Farbbereich. RGB ist
ein Farbraum, der auf dem RGB-Farbmodell (Rot, Grün
und Blau) basiert und üblicherweise für
Computermonitore zum Einsatz kommt. YCbCr ist ein
Farbraum, der auf einem Luminanzsignal (Y) und zwei
Farbunterschiedssignalen (Cb und Cr) basiert.
Deep Color
Deep Color bezieht sich auf verschiedene Bildschirm-
Farbtiefen, welche die 24-Bit-Tiefen früherer Versionen
der HDMI-Spezifikation übersteigen. Diese zusätzliche
Bit-Tiefe ermöglicht HDTVs und anderen
Anzeigegeräten, statt Millionen Farben Milliarden
anzuzeigen und Farbbänder auf dem Bildschirm für
sanfte Tonübergänge und gleichmäßige Abstufungen
zwischen den Farben zu eliminieren. Durch das erhöhte
Kontrastverhältnis können sehr viel mehr
Grauschattierungen zwischen Schwarz und Weiß
dargestellt werden. Darüber hinaus erhöht Deep Color
die Anzahl der verfügbaren Farben innerhalb der durch
die RGB- oder YCbCr-Farbräume festgelegten Grenzen.
DLNA
DLNA (Digital Living Network Alliance) erlaubt eine
bequeme Freigabe digitaler Medien über das Heim-
Netzwerk. Digitale Inhalte, die auf einem PC, auf dem
DLNA-Server-Software installiert ist, oder anderen
DLNA-kompatiblen Geräten gespeichert sind, können
Sie über den Player auf Ihrem TV genießen. Um den
Player mit Ihren DLNA-Servern zu verbinden, sind
einige Einstellungen Ihres DLNA-Server oder -Geräts
notwendig. Einzelheiten finden Sie in den Anleitungen
Ihrer DLNA-Server-Software oder Ihres DLNA-Geräts.
DivX®
DivX® ist ein digitales Videoformat von DivX, LLC,
einem Tochterunternehmen der Rovi Corporation.
Dieses Gerät ist DivX Certified® für die Wiedergabe
von DivX-Video. Besuchen Sie divx.com für weitere
Informationen und Software-Tools zum Konvertieren
von Dateien in DivX-Video.
Dolby Digital
Ein von Dolby Laboratories Inc. entwickeltes
Soundsystem, das der Audioausgabe das Ambiente
eines Kinos verleiht, wenn das Gerät an einen Dolby
Digital-Prozessor oder -Verstärker angeschlossen wird.
Dolby Digital Plus
Ein zur Erweiterung von Dolby Digital entwickeltes
Soundsystem. Diese Toncodiertechnologie unterstützt
7.1-Mehrkanal-Surround-Sound.
Dolby TrueHD
Dolby TrueHD ist eine verlustfreie
Kodierungstechnologie, die bis zu 8-Kanal-Surround-
Sound für die nächste Generation der optischen Discs
unterstützt. Der reproduzierte Sound ist Bit für Bit eine
getreue Abbildung des Originaltons.
DRC (Dynamic Range Control)
DRC ermöglicht die Einstellung des Bereichs zwischen
dem lautesten und dem leisesten Ton (Dynamikbereich)
für Wiedergabe mit durchschnittlicher Lautstärke.
Verwenden Sie diese Einstellung, wenn die Dialoge
schlecht hörbar sind oder wenn die Wiedergabe die
Nachbarn stören könnte (z.B. nachts).
DTS
Hierbei handelt es sich um ein von DTS, Inc. für den
Einsatz in Kinos entwickeltes digitales Soundsystem.
DTS-HD High Resolution Audio
DTS-HD High Resolution Audio ist eine neue
Technologie, die für die nächste Generation optischer
Disc-Formate mit hoher Auflösung entwickelt wurde.
DTS-HD Master Audio
DTS-HD Master Audio ist eine verlustfrei wirkende
Audio-Kompressionstechnik, die für die nächste
Generation optischer Disc-Formate mit hoher
Auflösung entwickelt wurde.
Glossar
42 De
Glossar
FLAC
FLAC (Free Lossless Audio Codec) ist ein offenes
Dateiformat für die verlustlose Komprimierung von
Audiodaten. Es weist gegenüber anderen
verlustbehaftet komprimierten Audioformaten zwar
eine schlechtere Komprimierungsrate auf, kann aber
häufig eine höhere Audioqualität bieten.
HDMI
HDMI (High-Definition Multimedia Interface) ist eine
Schnittstelle, die sowohl Video als auch Audio über einen
einzigen digitalen Anschluss unterstützt. Die HDMI-
Schnittstelle überträgt Videosignale mit Standard- oder
Hochauflösung sowie Mehrkanal-Audiosignale in
digitaler Form ohne Signalverschlechterung an AV-
Geräte wie ein HDMI-tauglicher TV.
Letterbox (LB 4:3)
Bildschirmformat mit schwarzen Balken am oberen
und unteren Bildrand, um die Wiedergabe von
Breitbild-Software (16:9) auf einem angeschlossenen
Fernsehgerät mit Format 4:3 zu ermöglichen.
Linear PCM Sound
Linear PCM ist ein bei Audio-CDs und manchen
DVDs und Blu-ray Discs verwendetes
Signalaufzeichnungsformat. Der Ton auf Audio-CDs
wird mit 44,1 kHz/16 Bit aufgenommen. (Auf DVDs
erfolgt die Tonaufnahme zwischen 48 kHz mit 16 Bit
und 96 kHz mit 24 Bit, auf Blu-ray Discs zwischen 48
kHz mit 16 Bit und 192 kHz mit 24 Bit.)
Mac-Adresse
Die Mac-Adresse ist ein eindeutiger Wert, der einem
Netzwerkgerät zu Identifikationszwecken zugeordnet
wird.
Pan Scan (PS 4:3)
Ein Bildschirmformat, das die Seiten des Bilds
abschneidet, um die Wiedergabe von Breitbild-
Software (16:9) auf einem angeschlossenen
Fernsehgerät des Formats 4:3 zu ermöglichen.
Untertitel
Dies sind die auf DVD-Discs aufgezeichneten
Textzeilen, die am unteren Bildrand erscheinen und
den Dialog übersetzen oder schriftlich anzeigen.
Untertitel sind bei vielen DVDs und Blu-ray Discs
verfügbar.
x.v.Color
x.v.Color reproduziert eine erweiterte Farbpalette und
kann fast sämtliche Farben darstellen, die vom
menschlichen Auge erfassbar sind.
43 De
Deutsch
Zusätzliche Informationen
5
Allgemeines
Stromversorgung
[Modelle für Vereinigtes Königreich, Europa und Australien]
........................................................ 110–240 V Wechselspannung, 50 Hz
[Modelle für Asien sowie Mittel- und Südamerika]
................................................... 110–240 V Wechselspannung, 50/60 Hz
[Andere Modelle] ........................... 110–240 V Wechselspannung, 60 Hz
Leistungsaufnahme............................................................................... 17 W
Leistungsaufnahme im Bereitschaftsmodus
HDMI Steuerung Aus, Netzwerkstandby Aus.................0,2 W (Typisch)
HDMI Steuerung Ein, Netzwerkstandby Aus ..................0,3 W (Typisch)
HDMI Steuerung Aus, Netzwerkstandby Ein..................5,5 W (Typisch)
HDMI Steuerung Ein, Netzwerkstandby Ein...................5,5 W (Typisch)
Abmessungen (B × H × T, einschließlich Vorsprünge)
....................................................................................... 435 × 86 × 257 mm
Gewicht ............................................................................................... 2,7 kg
Audioleistung
Audioausgangspegel (1 kHz, 0 dB)
Blu-ray Disc/DVD/CD-DA.........................................................2 ± 0,3 V
Signal-Rausch-Abstand
Blu-ray Disc/DVD/CD-DA............................................................ 115 dB
Dynamikbereich
Blu-ray Disc/DVD ......................................................................... 105 dB
CD-DA ........................................................................................... 100 dB
Harmonische Verzerrung (1 kHz)
Blu-ray Disc/DVD/CD-DA............................................................0,003%
Frequenzgang
Blu-ray Disc/DVD .................. 4 Hz bis 22 kHz (48 kHz Abtastfrequenz)
4 Hz bis 44 kHz (96 kHz Abtastfrequenz)
CD-DA ............................................................................. 4 Hz bis 20 kHz
Eingänge/Ausgänge
HDMI-Ausgang................................................................Buchse Typ A × 1
480i/576i/480p/576p/720p/1080i/1080p/1080p bei 24 Hz,
Deep Color, x.v. Farbunterstützung
Digitalausgang......................................................... optisch × 1, koaxial × 1
Analoger Audio-Ausgang......................................................Mixed 2 ch × 1
USB ..................................................................................Buchse Typ A × 2
WLAN.............................................................Standard: IEEE 802.11 b/g/n
Frequenzbereich: 2,4-GHz-Band
Andere Geräte...............................................................Remote IN/OUT × 1
Ethernet × 1
Änderungen der technischen Daten ohne Vorankündigung vorbehalten.
Urheberrecht
Audiovisuelles Material kann urheberrechtlich
geschützt sein und darf eventuell ohne Genehmigung
des Eigentümers der Urheberrechte nicht
aufgenommen werden. Beziehen Sie sich auf die
entsprechenden nationalen Gesetze.
“Blu-ray Disc™”, “Blu-ray™”, “Blu-ray 3D™”, “BD-
Live™”, “BONUSVIEW™” und die entsprechenden
Logos sind Warenzeichen der Blu-ray Disc Association.
ist ein Warenzeichen der DVD Format/Logo
Licensing Corporation.
Hergestellt unter Lizenz von Dolby Laboratories. „Dolby“
und das Doppel-D-Symbol sind Warenzeichen von Dolby
Laboratories.
Hergestellt unter Lizenz gemäß den US-Patent-Nummern:
5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,212,872;
7,333,929; 7,392,195; 7,272,567 sowie anderer in den
USA oder weltweit erteilter oder beantragter Patente.
DTS-HD und das DTS-HD-Symbol einzeln und
gemeinsam sind eingetragene Warenzeichen von und
DTS-HD Master Audio ist ein Warenzeichen von DTS,
Inc.
Das Produkt beinhaltet Software. © DTS, Inc. Alle Rechte
vorbehalten.
HDMI, das HDMI-Logo und High-Definition Multimedia
Interface sind Warenzeichen bzw. eingetragene
Warenzeichen von HDMI Licensing LLC in den USA
und/oder anderen Ländern.
x.v.Color™
„x.v.Color“ und das „x.v.Color“-Logo sind Warenzeichen
der Sony Corporation.
AVCHD und das AVCHD-Logo sind Warenzeichen der
Panasonic Corporation und der Sony Corporation.
Technische Daten
Hinweis
Fortsetzung auf der nächsten Seite. \
44 De
Technische Daten
Java ist ein eingetragenes Warenzeichen von Oracle und/
oder seiner verbundenen Unternehmen.
DLNA™ und DLNA CERTIFIED™ sind Warenzeichen
bzw. eingetragene Warenzeichen der Digital Living
Network Alliance. Alle Rechte vorbehalten. Unerlaubte
Verwendung ist ausdrücklich untersagt.
Das Wi-Fi CERTIFIED-Logo ist eine
Zertifizierungsmarke der Wi-Fi Alliance.
Das Wi-Fi Protected Setup-Kennzeichen ist ein Zeichen
der Wi-Fi Alliance.
„Wi-Fi“, „Wi-Fi Protected Setup“, „Wi-Fi Direct“ und
„Miracast“ sind Zeichen bzw. eingetragene Zeichen der
Wi-Fi Alliance.
Dieses Produkt unterliegt den Patentportfolio-Lizenzen
für AVC und VC-1, laut denen ein Benutzer für den
persönlichen und nichtkommerziellen Gebrauch dazu
ermächtigt ist, (i) Video im AVC Standard und VC-1
Standard (AVC/VC-1 Video) zu codieren und/oder (ii)
AVC/VC-1 Video zu decodieren, die durch einen
Benutzer für den persönlichen und nichtkommerziellen
Gebrauch codiert wurde und/oder von einem Anbieter
erhalten wurde, welcher über eine Lizenz zum Anbieten
von AVC/VC-1 Video verfügt. Eine Lizenz für andere
Zwecke wird weder erteilt noch impliziert. Zusätzliche
Informationen können von MPEG LA, LLC erhalten
werden. Siehe http://www.mpegla.com.
Dieses Produkt unterliegt der Patentportfolio-Lizenz für
MVC, laut welcher ein Benutzer für den persönlichen und
nicht entlohnten Gebrauch dazu ermächtigt ist, (i) Video
im MVC-Standard (MVC-Video) zu codieren und/oder
(ii) MVC-Video zu decodieren, die durch einen Benutzer
für den persönlichen Gebrauch codiert wurde und/oder
von einem Anbieter erhalten wurde, welcher über eine
Lizenz zum Anbieten von MVC-Video verfügt. Eine
Lizenz für andere Zwecke wird weder erteilt noch
impliziert. Zusätzliche Informationen können von MPEG
LA, LLC erhalten werden. Siehe http://www.mpegla.com.
Windows Media Player ist ein Warenzeichen bzw.
eingetragenes Warenzeichen der Microsoft Corporation in
den USA und/oder anderen Ländern.
Copyright 2004-2012 Verance Corporation. Cinavia® ist
ein Warenzeichen der Verance Corporation. Geschützt
durch US-Patent 7,369,677 sowie andere in den USA oder
weltweit erteilte oder beantragte Patente unter Lizenz der
Verance Corporation. Alle Rechte vorbehalten.
DivX®, DivX Certified®, DivX Plus® HD und die
zugehörigen Logos sind Warenzeichen der Rovi
Corporation oder ihrer Tochterunternehmen und
unterliegen Lizenzbedingungen.
DivX Certified® für die Wiedergabe von DivX®- und
DivX Plus® HD (H.264/.MKV)-Video bis zu 1080p HD
einschließlich Premium-Content.
INFORMATIONEN ÜBER DIVX VIDEO: DivX® ist
ein digitales Videoformat von DivX, LLC, einem
Tochterunternehmen der Rovi Corporation. Dieses Gerät
ist DivX Certified®, d.h. streng erprobt für die
Wiedergabe von DivX-Video. Besuchen Sie divx.com für
weitere Informationen und Software-Tools zum
Konvertieren von Dateien in DivX-Video.
INFORMATIONEN ÜBER VIDEO-ON-DEMAND:
Dieses -Gerät muss registriert werden, um DivX Video-
on-Demand (VOD)-Inhalte wiedergegeben werden
können. Die Erstellung des Registrierungscodes erfolgt
über den Bereich DivX VOD im Setup-Menü des Geräts.
Auf vod.divx.com finden Sie weitere Informationen zur
Vervollständigung Ihrer Registration.
45 De
Deutsch
Zusätzliche Informationen
5
ZUSÄTZLICHE INFORMATIONEN
Numerics
2 Kanal Downmix, SETUP-Menü .......34
2ND AUDIO, Fernbedienung ................8
3D Ausgang, SETUP-Menü ................32
3D Wiedergabe Information,
SETUP-Menü ..................................30
A
A/B, Fernbedienung ...............................9
Allgemeine Einstellungen,
SETUP-Menü ..................................30
Alterskontrolle, SETUP-Me ............31
ANGLE, Fernbedienung ........................9
Anzeige Einstellung, SETUP-Menü ....32
Audio, Bildschirmmenü .......................23
AUDIO, Fernbedienung .........................9
Audio, SETUP-Menü ...........................31
Audio-Ausgang, SETUP-Menü ...........34
Audio-Ausgangsformate ......................35
Audio-Einstellungen, SETUP-Menü ...34
Auto Power Standby, SETUP-Menü ...30
AV CONTROLLER ............................22
B
BD-Live ...............................................26
BD-Live-Verbindung, SETUP-Menü ...32
Bedienung des SETUP-Menüs ............29
Bild im Bild Anzeige, SETUP-Menü ...31
Bildschirmmenü ...................................23
Bitrate, Bildschirmmenü ......................23
C
CLEAR, Fernbedienung ........................8
Coaxial / Optical, SETUP-Menü .........34
Codepage, Bildschirmmenü .................23
Cursortasten, Fernbedienung .................9
D
De-Interlacing Modus, SETUP-Menü .33
Diashow, Bildschirmmenü ...................23
Digital Media Controller (DMC) .........15
Disc Auto-Wiedergabe,
SETUP-Menü ..................................31
DivX (R) VOD-DRM,
SETUP-Menü ..................................31
DLNA ..................................................15
Downsampling, SETUP-Menü ............34
DRC, SETUP-Menü ............................34
Dropbox ...............................................21
E
Einfaches Konfigurationsmenü,
SETUP-Menü ..................................30
ENTER, Fernbedienung .........................9
F
Farbraum, SETUP-Menü .....................33
Farbtasten, Fernbedienung .....................8
Fernbedienung .......................................8
Funktion Bild im Bild ..........................26
H
HDMI 1080p 24Hz, SETUP-Me .....33
HDMI Deep Color, SETUP-Menü ......33
HDMI Steuerung, Funktion .................30
HDMI Steuerung, SETUP-Menü .........30
HDMI, SETUP-Menü ..........................34
HOME, Fernbedienung ..........................8
I
Information, SETUP-Menü ..................31
IP Einstellungen, SETUP-Menü ..........32
K
Kamerawinkel, SETUP-Menü .............31
Kapitel, Bildschirmmenü .....................23
L
Ländercode, SETUP-Menü ..................31
Last Memory, SETUP-Menü ...............31
Lautsprechereinstellung,
SETUP-Menü ...................................34
M
Menü, SETUP-Menü ............................31
Miracast ................................................22
Mode/Play Mode, Bildschirmmenü .....23
N
Netzwerk, SETUP-Menü .....................31
Netzwerksteuerung, SETUP-Menü ......32
O
ON SCREEN, Fernbedienung ................9
OSD, SETUP-Menü .............................30
P
Passwort ändern, SETUP-Menü ...........31
PBC (Push Button Configuration) .......31
Picasa-Webalben ..................................21
PIN code (WPS) ...................................31
PIP, Fernbedienung ................................8
POP-UP/MENU, Fernbedienung ...........9
Post-Prozess, SETUP-Menü ................34
PROGRAM, Fernbedienung ..................8
Programmwiedergabe ..........................25
Proxy-Einstellung, SETUP-Menü ........32
R
Rauschunterdrückung,
SETUP-Menü ...................................33
REPEAT, Fernbedienung .......................8
RETURN, Fernbedienung ......................9
S
SACD-Ausgang, SETUP-Menü ...........34
Schnellsuche, Bildschirmmenü ............23
SEARCH, Fernbedienung ......................9
SETUP, Fernbedienung ..........................9
SETUP-Menü .......................................27
SHUFFLE, Fernbedienung ....................8
Sicherheit, SETUP-Menü .....................31
Sofortwiedergabe, Bildschirmmenü .....23
Software-Upgrade ................................37
Speichermedium, SETUP-Menü ..........30
Sprache, SETUP-Menü ........................30
STATUS, Fernbedienung .......................9
Status-Menü .........................................24
Steuertasten, Fernbedienung ..................9
SUBTITLE, Fernbedienung ...................9
Suchfunktion ........................................25
System, SETUP-Menü .........................30
Systeminformationen,
SETUP-Menü .................................. 34
T
Titel, Bildschirmmenü ......................... 23
TOP MENU, Fernbedienung ................. 9
Track/Datei, Bildschirmmenü ............. 23
TV Bildschirm, SETUP-Menü ............ 32
TV, SETUP-Menü ............................... 32
TV-System, SETUP-Menü .................. 33
U
Übergang, Bildschirmmenü ................. 23
Untertitel Modus, Bildschirmmenü ..... 23
Untertitel, Bildschirmmenü ................. 23
Untertitel, SETUP-Menü ............... 31, 33
Upgrade der Software .......................... 37
Upgrade Information ........................... 30
Upgrade, SETUP-Menü ...................... 30
Upmix, SETUP-Menü ......................... 34
V
Verbindung einstellen,
SETUP-Menü .................................. 31
Verbindungstest, SETUP-Menü .......... 32
Video-Ausgangsformate ...................... 36
Videokonfigurationsmenü,
SETUP-Menü .................................. 33
W
Weitere Anschlüsse ............................. 17
Werkseinstellung laden,
SETUP-Menü .................................. 30
Wiedergabe von Datendiscs ................ 19
Wiedergabe von USB-Inhalten ............ 19
Wiedergabe, SETUP-Menü ................. 31
Winkel, Bildschirmmenü ..................... 23
WPS (Wi-Fi Protected Setup) ............. 31
Y
YouTube .............................................. 21
Z
Zeit, Bildschirmmenü .......................... 23
Zifferntasten, Fernbedienung ................ 8
ZOOM, Fernbedienung ......................... 8
Zweitton, Bildschirmmenü .................. 23
Zweittonauswahl, SETUP-Menü ......... 31
Zweitvideo, Bildschirmmenü .............. 23
Index
Observera-i Sv
1 Läs noga denna bruksanvisning för att kunna ha största
möjliga nöje av enheten. Förvara bruksanvisningen nära till
hands för framtida referens.
2 Installera anläggningen på en väl ventilerad plats där det är
svalt, torrt, rent och se till att den inte utsätts för direkt solljus,
värmekällor, vibrationer, damm, fukt och/eller kyla. Lämna
följande mellanrum för ventilation.
Över: 10 cm
Bakom: 10 cm
Sidor: 10 cm
3 Placera enheten på behörigt avstånd från andra elapparater,
motorer, transformatorer och annat som kan orsaka
störningar.
4 Utsätt inte enheten för hastiga temperaturväxlingar och
placera den inte på ett ställe där luftfuktigheten är hög (t.ex.
nära en luftfuktare) då fuktbildning i enheten skapar risk för
brand, elstötar, skador på enheten eller personskador.
5 Placera inte enheten på ett ställe där främmande föremål kan
tränga in i den eller där den kan utsättas för droppar eller
vattenstänk. Placera aldrig det följande ovanpå enheten:
Övriga apparater då sådana kan orsaka skador och/
eller missfärgning av enhetens hölje.
Brännbara föremål (t.ex. stearinljus) då sådana skapar
risk för brand, skador på enheten och/eller
personskador.
Vätskebehållare som kan falla och spilla vätska över
enheten, vilket skapar risk för elstötar och/eller skador
på enheten.
6 Täck aldrig över enheten med en tidning, duk, gardin el.dyl.
då detta skapar risk för överhettning. En alltför hög
temperatur inuti enheten kan leda till brand, skador på
enheten och/eller personskador.
7 Anslut inte enheten till ett vägguttag förrän samtliga övriga
anslutningar slutförts.
8 Använd aldrig enheten vänd upp och ned. Detta kan leda till
överhettning som orsakar skador.
9 Hantera inte tangenter, reglage och kablar onödigt hårdhänt.
10 Fatta tag i själva kontakten när nätkabeln kopplas bort från
vägguttaget; dra aldrig i kabeln.
11 Använd aldrig några kemiska lösningar för rengöring då
dessa kan skada ytbehandlingen. Använd en ren, torr trasa.
12 Använd endast den spänning som står angiven på enheten.
Anslutning till en strömkälla med högre spänning än den
angivna kan orsaka brand, skador på enheten och/eller
personskador. Yamaha åtar sig inget ansvar för skador
beroende på att enheten används med en spänning utöver den
angivna.
13 Koppla bort nätkabeln från vägguttaget för att undvika skador
p.g.a. blixtnedslag om ett åskväder uppstår.
14 Försöka aldrig att utföra egna reparationer. Kontakta en
kvalificerad tekniker från Yamaha om servicebehov
föreligger. Du får inte under några omständigheter ta av
höljet.
15 Koppla bort nätkabeln från vägguttaget om enheten inte ska
användas under en längre tid (t.ex. under semestern).
16 Läs avsnittet ”Felsökning” om vanligt förekommande
driftsproblem innan du förutsätter att enheten är söndrig.
17 Innan enheten flyttas ska du trycka på strömknappen p för
att ställa den i beredskapsläge och sedan koppla bort
nätkabeln från vägguttaget.
18 Kondensation (imma) uppstår, om den omgivande
temperaturen plötsligt ändras. Koppla i så fall loss nätkabeln
från nätuttaget och låt apparaten vila.
19 Vid långvarig användning kan det hända att apparaten blir
väldigt varm. Slå i så fall av strömmen och låt apparaten vila
tills den har svalnat.
20 Installera receivern nära ett nätuttag och där stickkontakten
lätt kan kommas åt.
21 Utsätt inte batterierna för kraftig värme från exempelvis
solljus, eld eller liknande.
LASERSÄKERHET
Apparaten använder sig av en laser. På grund av risken för
ögonskador bör ingen annan än en kvalificerad reparatör
öppna höljet eller försöka reparera apparaten.
FARA!
Apparaten avger synlig laserstrålning i öppet läge. Undvik
direkt ögonkontakt med strålen. Placera inte ögonen i
närheten av skivfacket eller någon annan öppning för att
titta in i apparaten, medan apparaten är ansluten till ett
nätuttag.
Observera: Läs detta innan enheten tas i bruk.
Använd inte den här enheten närmare än 22 cm från
personer med pacemaker eller defibrillatorimplantat.
Radiovågor kan påverka elektromedicinska apparater.
Använd inte den här apparaten nära medicintekniska
produkter eller inne i sjukvårdsinrättningar.
Den här enheten är inte bortkopplad från nätströmmen
så länge den är inkopplad i vägguttaget, även om själva
enheten är avstängd med p. Detta tillsnd kallas för
beredskapsläget (standby). Enheten är konstruerad för
att förbruka en mycket liten mängd ström i detta
tillstånd.
Där stickkontakt till elnätet eller en koppling till
apparaten används som frånkopplingsenhet, ska
frånkopplingsenheten vara tillgänglig och i fungerande
skick.
VARNING
UTSÄTT INTE ENHETEN FÖR REGN ELLER
FUKT DÅ DETTA SKAPAR RISK FÖR BRAND
ELLER ELSTÖTAR.
1 Sv
1
2
3
4
5
Svenska
Vad du kan göra med den här spelaren ........... 2
Ett brett utbud av skivor och filformat som stöds .......... 2
Förbättrade nätverksfunktioner....................................... 2
Enkel installation och drift ............................................. 2
Medföljande delar............................................... 2
Om skivor och filer............................................. 3
Typer av skivor/filer som kan användas med denna spelare
... 3
Ladda en skiva................................................................ 4
Försiktighetsåtgärder gällande skivor............................. 5
Att observera när du tittar på videobilder i 3D............... 5
Cinavia teknik................................................................. 5
Kontroller och funktioner .................................. 6
Frontpanel....................................................................... 6
Bakre panel..................................................................... 7
Fjärrkontroll.................................................................... 8
Video-/ljudanslutningar ................................... 11
Anslutning till en TV-apparat via en AV-mottagare.... 12
Anslutning till en TV-apparat direkt ............................ 12
Anslutning till en TV- och ljudutrustning .................... 13
Nätverksanslutningen...................................... 14
Trådlös anslutning ........................................................ 14
Trådbunden anslutning ................................................. 14
Inställning av DLNA server ......................................... 15
USB anslutning ................................................ 16
Andra anslutningar .......................................... 17
Anslutning till REMOTE CONTROL uttag................. 17
Ansluta nätkabeln ......................................................... 17
Initial inställning............................................... 18
Inställning med snabbinstallation ................................. 18
Inställning av trådlös anslutning................................... 18
HOME meny ...................................................... 19
Spela upp foton/musik/video ........................................ 19
Använda nätverkstjänster ............................... 21
Om Dropbox™ ............................................................. 21
OmPicasa™ Webbalbum.............................................. 21
Om YouTube™ ............................................................ 21
Använd smarttelefon med bilder och
videoklipp på TV-skärmen (Miracast™) ..... 22
Användning av denna spelare från mobila
enheter (AV CONTROLLER) ........................ 22
Avancerade uppspelningsfunktioner............. 23
Skärmmeny................................................................... 23
Statusmeny.................................................................... 24
Programmerad uppspelning.......................................... 25
Använda sökning ......................................................... 25
Glädje av BONUSVIEW™ and BD-Live™................ 25
Använda bild-i-bild-funktionen
(uppspelning av sekundärt ljud/video)..................... 26
Använda funktionen för BD-Live™............................. 26
SETUP meny..................................................... 27
Exempel på SETUP meny operation............................ 29
Allmäna Inställningar ................................................... 30
Display inställningar..................................................... 32
Ljudinställning.............................................................. 34
System Information ...................................................... 34
Angående format för ljudutmatning ............................. 35
Om formaten för HDMI videoutmatning ..................... 36
Programvaruuppgradering.............................. 37
Uppgradera programvaran............................................ 37
Felsökning......................................................... 38
Ström............................................................................. 38
Grundläggande funktioner ............................................ 38
Skivuppspelning............................................................ 38
Bild................................................................................ 39
Ljud ............................................................................... 39
Nätverk.......................................................................... 39
Meddelanden på skärmen.............................................. 40
Ordlista.............................................................. 41
Specifikationer.................................................. 43
Allmänt.......................................................................... 43
Ljudprestanda................................................................ 43
ln-/Utgångar .................................................................. 43
Upphovsrätt................................................................... 43
Index .................................................................. 45
(i slutet av denna manual)
Om den här manualen
Denna manual beskriver hur du använder denna
spelare med en fjärrkontroll med undantag när den
inte är tillgänglig. Vissa av dessa driftfunktioner
finns också på frontpanelen med hjälp av knapparna.
Anmärkningar innehåller viktig information om
säkerhet och drift. Tips ger dig information för din
användning av apparaten.
Denna manual är tryckt före tillverkningen av
produkten. Design och specifikationer kan komma
att ändras delvis som en följd av förbättringar etc. I
händelse av skillnader mellan manualen och
produkten, har produkten företräde.
De ikoner som används i denna
manual
Ikoner används för att indikera tillgängliga knappar/
funktioner för ett visst format. För information om
spelbara skivor och format, se sidan 3.
: BD-Video
: DVD-Video, DVD-VR, DVD+VR
: Audio CD, Super Audio CD
: Videofiler
: Ljudfiler
: Fotofiler
Innehåll
1. Introduktion
2 Anslutning
3. Spela upp
4. Inställningar
5. Ytterligare information
Information about third party software licenses...i
Ny mjukvara som ger ytterligare funktioner och
produktförbättringar kommer att släppas efter behov.
Vi rekommenderar att du uppgraderar programvaran
för denna spelare till den senaste versionen
regelbundet. För mer information, se ”Uppgradering
av programvara” (s. 37).
BD
DVD
CD
VIDEO
MUSIC
PHOTO
2 Sv
INTRODUKTION
Ett brett utbud av skivor och filformat som stöds
Blu-ray Disc™, DVD, SA-CD och CD (s. 23)
Blu-ray 3D™ (s. 11), BONUSVIEW™ och BD-Live™ (s. 25)
Video, musik och foto filer på DVD-R/RW skivor, CD-R/RW skivor och USB-minnenesenheter (s. 19)
Förbättrade nätverksfunktioner
Få glädje av DLNA server (PC eller NAS) innehåll (s. 19)
Dra nytta av det strömmande innehållet på nätverkstjänsterna (s. 21)
Använd denna spelare från mobila enheter (AV CONTROLLER) via nätverket (s. 22)
Få ut mer med bilder och videoklipp från smart telefonen på TV-skärmen (Miracast™) (s. 22)
Enkel installation och drift
Snabb och enkel första installation (s. 18)
Automatisk trådlös installation med WPS (Wi-Fi skyddad inställning) (s. 18)
Uppgradering av programvara via nätverk eller USB-enhet (s. 37)
Sekventiell drift av TV, AV mottagare och denna spelare (HDMI Kontroll) (s. 30)
Kontrollera att följande delar medföljer produkten.
Vad du kan göra med den här spelaren
Medföljande delar
5#%&
5#%&
USB innehåll
Trådlöst nätverk
(WPS stöd)
Olika skivor
Smarttelefon med innehåll
(Miracast)
Nätverkets strömmande
innehåll
PC/NAS innehåll
(DLNA)
Batterier (×2)
(AAA, R03, UM-4)
Fjärrkontroll Strömkabel
3 Sv
Introduktion
1
Svenska
Typer av skivor/filer som kan
användas med denna spelare
12 cm och 8 cm skivor kan spelas upp med denna
spelare. Använd inte en 8 cm till 12 cm-adapter.
Använd skivor som överensstämmer med
kompatibla normer såsom anges av officiella
logotyper på skivetiketten. Vi kan inte garantera
uppspelning av skivor som inte uppfyller dessa
normer. Vi kan ej heller garantera optimal bild- eller
ljudkvalitet, även om skivorna kan spelas upp.
* Den här spelaren är kompatibel med en USB-
minnesenhet formaterad med FAT 16/32 och NTFS.
*1 Samplingsfrekvens inom 32-48 kHz (Stereo) och
bithastighet inom 8-320 kbps
*2 Samplingsfrekvens inom 32-48 kHz (Stereo) och
bithastighet inom 32-192 kbps
*3 Samplingsfrekvens på upp till 192 kHz/24 bitars
(LPCM/Stereo)
*4 WMV9 (maximal upplösning: 1,920 x 1,080)
Det går inte att garantera att du kan spela upp alla
filer som anges i diagrammet ovan beroende på hur
filen skapats eller vilka codecs som använts.
Uppspelning av alla filer på skivan, USB-
minnesenhet och nätverket garanteras inte.
En copyrightskyddad fil kan inte spelas upp.
När du använder DLNA, ste en fil leva upp till
kraven för DLNA server.
Regional användningsinformation för
Blu-ray Skiva/ DVD-video
Blu-ray Skiva/DVD videospelare och skivor har
regionala koder, som avgör i vilken region en skiva
kan spelas upp. Kontrollera regionskodmarkeringen
på spelarens baksida.
För en Blu-ray-skiva, kan skivan spelas upp på
denna spelare med samma regionskod, eller
regionskoden ”ABC”-märke.
För en DVD-skiva, kan skivan spelas upp på denna
spelare med samma märke för regionkoden, eller
regionskoden med märket ”ALL”.
Om skivor och filer
Materialtyp Inspelningsformat
BD-ROM/BD-R/
BD-RE
BD-Video-/Datafiler
DVD-ROM DVD-Video
DVD-R/DVD-R
DL/DVD-RW
DVD-Video/DVD-VR/AVCHD/Datafiler
DVD+R/DVD+R
DL/DVD+RW
DVD-Video/DVD+VR/AVCHD/Datafiler
CD-ROM CDDA/HDCD
CD-R/CD-RW CDDA/Datafiler
SA-CD SA-CD
USB* Datafiler
DLNA Datafiler
Spelbara
ljudfilsformat
Spelbara
videofilsformat
Spelbara
fotofilsformat
MP3 (.mp3)
*1
WMA (.wma)
*2
AAC (.aac/.m4a)
WAV (.wav)
*3
FLAC (.flac)
*3
ALAC (.m4a)
*3
DivX (.divx)
MKV med DivX
format (.mkv)
MKV med H.264
(.mkv)
MPEG PS (.mpeg/
.mpg)
MPEG TS (.ts)
MPEG-4 (.mp4)
VOB (.vob)
AVI (.avi)
ASF (.asf)
WMV (.wmv)
*4
JPEG (.jpeg/.jpg)
GIF (.gif)
PNG (.png)
MUSIC
PHOTO
Kommentarer
Användningsinformation för regionen
Destination BD-Video DVD-Video
U.S.A. och Kanada Regionskod ”A”
eller ”ABC”
Regionsnummer ”1”
eller ”ALL”
Europa Regionskod ”B”
eller ”ABC”
Regionsnummer ”2”
eller ”ALL”
Asien, Taiwan och
Korea
Regionskod ”A”
eller ”ABC”
Regionsnummer ”3”
eller ”ALL”
Central-och
Sydamerika
Regionskod ”A”
eller ”ABC”
Regionsnummer ”4”
eller ”ALL”
Australien Regionskod ”B
eller ”ABC”
Regionsnummer ”4”
eller ”ALL”
1
ALL
2
ALL
3
ALL
4
ALL
4
ALL
4 Sv
Om skivor och filer
Blu-ray-skiva/DVD-video användning och
funktioner kan skilja sig från förklaringarna i denna
manual och vissa funktioner kan förbjudas på grund
av skivtillverkarens inställningar.
Om en menyskärm eller instruktionsmeddelanden
visas vid uppspelning av en skiva ska du följa de
angivna anvisningarna.
Beroende på skivan ifråga är det möjligt att vissa
skivor inte kan spelas upp.
Slutbehandla alla inspelningsmedier som spelas upp
i denna spelare.
Slutbehandla” betyder att en brännare behandlar en
inspelad skiva så att den kan spelas på såväl denna
spelare som andra spelare/brännare. Enbart
slutbehandlade skivor kan spelas upp på denna
spelare. (Denna spelare har ingen funktion för att
slutbehandla skivor.)
Om Super Audio CD (SA-CD)
Ljudformat är baserat på nuvarande CD- standarder,
men innehåller en större mängd information vilket
ger högre ljudkvalitet. Det finns tre typer av skivor:
enlagers, dubbellagers och hybridskivor. Hybrid
skivan kan spelas på befintliga CD-spelare samt
Super Audio CD-spelare eftersom den innehåller
både standard ljud-CD och Super Audio CD-
information.
Den här enheten visar inte de textdata som finns på
skivorna på frontpanelens display.
Ladda en skiva
Sätt i skivan med etikettsidan vänd uppåt.
På en skiva som är inspelad på båda sidor ska sidan
du vill spela upp vara vänd nedåt.
Uppspelning påbörjas automatiskt beroende på
skivan och spelarens inställning.
Menyn kanske visas först, beroende på skiva.
Skivladdningstiden kan variera beroende på skiva.
Ryssland Regionskod ”C
eller ”ABC”
Regionsnummer ”5
eller ”ALL”
Kommentarer
Användningsinformation för regionen
Destination BD-Video DVD-Video
5
ALL
Kommentar
Kommentarer
1
2
3
Super Audio CD-skivtyp
Enkellagerskiva
HD-lager
Dubbellagerskiva
Hybridlagerskiva
HD-lager
CD-lager
HD-lager
Hybrid Super Audio CD-skiva
CD-lager som kan spelas
upp på vilken CD-spelare
som helst
- DSD Stereo-ljud i hög kvalitet
- Flerkanaligt DSD-ljud i hög
kvalitet
HD-lager som innehåller:
5 Sv
Om skivor och filer
Introduktion
1
Svenska
Försiktighetsåtgärder gällande
skivor
Akta dig för repor och damm
Blu-ray-skiva, DVD-och CD -skivor är känsliga för
damm, fingeravtryck och särskilt repor. En repig
skiva kan kanske inte spelas upp. Hantera skivorna
försiktigt och förvara dem på ett tryggt ställe.
Förvaring av skivor
Hanteringsföreskrifter
Rengöring av pickuplinsen
Använd aldrig kommersiellt tillgängliga
rengöringsskivor. Dessa skivor kan orsaka skador på
linsen.
Uppsök närmaste av Yamaha godkänd
serviceverkstad för rengöring av linsen.
Att observera när du tittar på
videobilder i 3D
Vissa människor upplever obehag (såsom astenopi,
trötthet eller illamående) när de tittar på videobilder i
3D. Vi rekommenderar att du då och då tar pauser
medan du tittar på videobilder i 3D.
Om du upplever något obehag ska du sluta titta på
videobilderna i 3D tills obehaget går över. Rådgör
med en läkare om du känner av ett allvarligt obehag.
Läs manualen (Blu-ray-skiva och TV) och / eller de
meddelanden om försiktighet noggrant som visas på
TV-apparaten.
Synen hos småbarn (speciellt barn under sex år)
utvecklas fortfarande. Rådgör med din läkare (som
t.ex. en barnläkare eller ögonläkare) innan du låter
småbarn titta på videobilder i 3D.
Vuxna bör övervaka småbarn för att se till att de
följer rekommendationerna som givits ovan.
Cinavia teknik
Cinavia teknik är en del av innehållet för
skyddssystemet som ingår i din Blu-ray-skivspelare.
Följande meddelanden kan visas och uppspelningen
stoppas eller ljudutgångar tystnar tillfälligt av din
Blu-ray-skivspelare om du spelar en piratkopia med
innehåll som skyddas av Cinavias teknik.
Dessa meddelanden visas bara på engelska.
Meddelande från Cinavia
Denna produkt använder Cinavia teknik för att begränsa
användningen av otillåtna kopior av vissa kommersiellt
producerade filmer och videor och dess ljudspår. När en
kopia som inte får spelas upp känns av visas ett
meddelanden och uppspelningen eller kopieringen
avbryts.
Mer information om Cinavia tekniken tillhandahålls av
Cinavia Online konsumentinformation center på
http://www.cinavia.com
. För att få ytterligare information
om Cinavia per post, skicka ett vykort med din postadress
till: Cinavia Consumer Information Center, PO Box
86851, San Diego, CA, 92138, USA.
Placera skivan mitt i skivasken och
försvara asken och skivan upprätt.
Undvik att förvara skivor på ställen som
utsätts för solsken, nära värmekällor eller
på ställen med hög luftfuktighet.
Tappa ej skivan och utsätt den inte för
hårda stötar eller vibrationer.
Undvik att förvara skivor på ställen där det
är väldigt dammigt eller fuktigt.
Om ytan blir smutsig ska du torka av den
med en mjuk, fuktig trasa (endast vatten).
När du torkar skivor bör du alltid föra
trasan från mitten och utåt.
Använd inte skivrengöringssprejer,
bensol, thinner, vätska mot statisk
elektricitet eller andra lösningar.
Vidrör aldrig skivytan med fingrarna.
Fäst inte papper eller etiketter på skivan.
Om skivans spelyta är smutsig eller repig kan
spelaren besluta att skivan är inkompatibel och stöta
ur skivan eller spela upp den felaktigt. Torka av
smuts på spelytan med en mjuk trasa.
Kommentar
Uppspelningen stoppad. Innehållet som spelas
skyddas av Cinavia ® och är inte godkänd för
uppspelning på denna enhet.
För mer information, se http://www.cinavia.com.
Meddelandekod 1.
Ljudet har tillfälligt dämpats. Justera inte
uppspelningsvolymen. Innehållet som spelas
skyddas av Cinavia ® och är inte godkänd för
uppspelning på denna enhet.
För mer information, se http://www.cinavia.com.
Meddelandekod 3.
6 Sv
Frontpanel
1 p (På/standby)
Slår på spelaren/ställer den i standby-läge.
Tryck och håll p på frontpanelen i mer än 5 sekunder
för att återställa den här spelaren (systemåterställning).
2 USB kontaktdon (s. 16)
3 SA-CD indikator
Lyser upp när en SA-CD laddas och SA-CD skikt (s. 4)
är vald.
4 Frontpanelens display
Visar information o m användningsstatus.
5 Skivfackets lucka
6 (Mata ut)
Öppnas/stänger skivfacket.
7 (Sök bakåt/Hoppa bakåt)
Tryck för att hoppa bakåt och tryck och håll ner för att
söka bakåt.
8 (Sök framåt/Hoppa framåt)
Tryck för att hoppa framåt, och tryck håll för att söka
framåt.
9 (Spela upp)
Påbörjar uppspelning.
0 (Paus)
Pausar uppspelningen.
A (Stopp)
Stoppar uppspelningen.
Ta bort skyddsfilmen från frontpanelen innan du använder spelaren.
Kontroller och funktioner
USB
5#%&
2 5 61 43 7 8 9 0 A
Kommentar
7 Sv
Kontroller och funktioner
Introduktion
1
Svenska
Bakre panel
1 AUDIO OUT (L/R) (s. 13)
2 HDMI (s. 11)
3 DIGITAL OUT (COAXIAL/OPTICAL) (s. 13)
4 USB (s. 16)
5 NETWORK (s. 14)
6 REMOTE CONTROL (OUT/IN) (s. 17)
7 AC IN (s. 17)
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT
NETWORK
USB
HDMI
REMOTE CONTROL
OUT IN
AC IN
1 6 72 3 45
8 Sv
Kontroller och funktioner
Fjärrkontroll
visas längst upp till vänster på skärmen när den
nedtryckta knappen inte är tillgänglig.
1 Infraröd signalsändare: Skickat ut en infraröd
signal. Sikta mot detta fönster med fjärrkontrollsensorn
(s. 10).
2 p: Slår på denna spelare eller ställer den i vänteläge.
3 : Öppnar/stänger skivfacket.
4 Färgknappar : Använd dessa knappar enligt
instruktionerna på skärmen.
ZOOM : Zoomar in/ut.
Storleken på skärmen ändras varje gång du trycker på
knappen (zooma in/ut: 3 steg vardera).
PROGRAM : Anger ordningen för
uppspelningen (s. 25). Du kan ställa in upp till 15 spår
(för en ljudskiva) eller titlar/kapitel (DVD-video).
SHUFFLE :
Väljer läget slumpvis vid uppspelning (s. 23).
REPEAT
: Växlar upprepa läge. Upprepningsläget som
visas nedan ändras med varje knapptryck.
: Upprepar titeln som spelas upp.
: Upprepar kapitlet som spelas upp.
: Upprepar mappen som spelas upp.
: Upprepar alla spår/filer på skivan.
: Upprepar det spår/den fil som spelas upp.
5 Sifferknappar: Anger nummer, eller hoppar till
spåret/kapitlet som motsvarar det inmatade numret
under uppspelning. De här knapparna är ev. inte
tillgängliga beroende på skivtyp och
uppspelningsförhållanden.
6 CLEAR: Rensar angivet nummer/inställda spår.
7 PIP : Slår på/av Bild i bild (s. 26). PIP märket
( ) visas på skärmen när den här funktionen är
tillgänglig. Du kan även välja detta objekt från menyn
på skärmen (s. 23).
PIP märket visas endast när Bild i Bild är inställd på
(s. 31).
8 MIRACAST: Startar Miracast (s. 22).
9 2ND AUDIO : Väljer sekundärt ljud för Bild-i-
bild (s. 26) eller ljud kommentarer. Det sekundära
ljudmärket ( ) visas på skärmen när den här
funktionen är tillgänglig (s. 34). Du kan även välja
detta objekt från menyn på skärmen (s. 23).
Sekundära ljudmärket visas endast när Secondary
Audio är inställd på (s. 31).
0 HOME: Visar HOME menyskärmen (s. 19).
Kommentar
PROGRAM SHUFFLE REPEAT
REPEAT A/B
ZOOM
AUDIO
SUBTITTLE
ANGLE
SEARCH
MIRACAST
CLEAR
PIP
HOME
2ND
AUDIO
ENTER
TOP MENU
RETURN ON SCREEN
POP-UP MENU
SETUP
STATUSSETUP
RED
GREEN BLUE
YELLOW
L
N
J
K
H
E
M
I
0
7
6
5
D
4
3
8
A
9
C
B
E
F
2
1
G
Kommentar
Kommentar
BD
DVD
VIDEO PHOTO
DVD
CD
DVD
CD
VIDEO
PHOTO
BD
DVD
CD
PHOTO
BD
BD
9 Sv
Kontroller och funktioner
Introduktion
1
Svenska
A TOP MENU : Visar översta
menynskärmen om skivan innehåller en meny. Välj
önskad post med 5/a/2/3 och ENTER.
Specifika handlingar kan skilja sig från de som anges
här beroende på skivan. Följ instruktionerna på varje
menyskärm.
B Markörknappar (5/a/2/3): Flyttar fokus i
menyskärmen.
ENTER: Väljer fokuserad meny/post.
C RETURN: Återgår till föregående meny eller skärm,
etc.
D Kontrollknappar
: Stoppar uppspelning.
: Pausar uppspelning.
: Spelar upp innehåll.
/: Hoppar bakåt/framåt.
/
:
Söker framåt/bakåt. Sökningshastigheten ändras med
varje knapptryck (sök bakåt/framåt: 5 steg vardera).
Tryck på för att återuppta normal uppspelning.
: Ändrar hastigheten på ett bildspel
(långsammare/snabbare: 3 steg).
/
:
Tryck på för snabbsökning/återuppspelning.
Snabbsökning hoppar 30 sekunder framåt.
Snabbåteruppspelning spelar upp innehållet från 10
sekunder innan igen.
E SETUP: Visar SETUP menyskärmen (s. 27).
F STATUS: Visar uppspelningsinformation (s. 24).
G REPEAT A/B :
Spelar upp en specifik del du vill upprepa.
1 Tryck REPEAT A/B vid fönstret där du vill ställa
in startpunkten. ”A-” visas på skärmen.
2 Tryck REPEAT A/B igen vid fönstret där du vill
ställa in slutpunkten. ”A-B” visas på skärmen.
Upprepad uppspelning påbörjas.
3 För att avbryta upprepad uppspelning, tryck på
REPEAT A/B. ”A-B” försvinner och upprepa
uppspelning är klar.
Denna funktion kan ibland inte utföras beroende på
skivans specifikationer.
H SUBTITLE : Förändrar
under
titeln
s språk (s. 42) om tillgängligt. Du kan även
välja detta objekt från menyn på skärmen (s. 23).
I ANGLE : Ändrar kameravinkeln om
videon är inspelad med flera vinklar. Vinkelmärket
( ) visas på skärmen när den här funktionen är
tillgänglig. Du kan även välja detta objekt från menyn
på skärmen (s. 23).
Vinkelmärket visas endast när Kameravinkel är
inställd på (s. 31).
J AUDIO : Ändrar ljudspråket eller
formatet. Du kan även välja detta objekt från menyn
på skärmen (s. 23).
K SEARCH :
Hoppar till en specificerad punkt under
uppspelningen. Mer information om denna funktion
finns i ”Använda sökning” (s. 25). Du kan även välja
detta objekt från statusmenyn (s. 24).
L YouTube: Startar YouTube (s. 21).
M POP-UP/MENU : Visar pop-upp-menyn.
Menyns innehåll varierar beroende på skivan. För
information om hur du visar och använder pop-upp-
menyn, se skivans manual.
Översta menyskärmen kan visas genom att trycka
POP-UP/MENU beroende på DVD.
N ON SCREEN: Visas On Screen-menyn (s. 23).
Kommentar
BD
DVD
BD
DVD
CD
VIDEO MUSIC PHOTO
BD
DVD
CD
VIDEO MUSIC
PHOTO
BD
DVD
CD
VIDEO MUSIC
Kommentar
Kommentar
BD DVD
CD
VIDEO
BD DVD
BD DVD
BD
DVD
BD
DVD
CD
BD
DVD
10 Sv
Kontroller och funktioner
Isättning av batterier i fjärrkontrollen
Byt ut båda batterierna när fjärrkontrollens räckvidd
försämras.
Använd AAA, R03, UM-4 batterier.
Kontrollera att batterierna är vända åt rätt håll. Se
illustrationen på insidan av batterifacket.
Ta ur batterierna om fjärrkontrollen inte ska
användas under en längre tid.
Blanda inte gamla och nya batteriet.
Använd inte olika typer av batterier (t.ex. alkaliska
och manganbatterier) samtidigt. Läs förpackningen
noga eftersom dessa olika typer av batterier kan ha
samma färg och form.
Om batterierna har läckt, måste du genast kasta bort
dem. Undvik att beröra det utläckta ämnet eller låta
det komma i kontakt med kläder och liknande.
Rengör batterifacket noga innan du sätter i nya
batterier.
Kasta inte bort batterier i det vanliga
hushållsavfallet. Kasta bort dem enligt lokala regler
och förordningar.
Håll batterier borta från barn. Om någon sväljer ett
batteri av misstag måste läkare kontaktas omgående.
Om du inte tänker använda fjärrkontrollen under en
längre period bör du ta ut batterierna ur den.
De medföljande batterierna får inte laddas eller
öppnas.
Fjärrkontrollens ungefärliga
styromfång
ID-funktion
När du använder flera Yamaha produkter kan
fjärrkontrollen fungerar på en annan Yamaha-produkt
eller att en annan fjärrkontroll kan fungera på denna
spelare. I detta fall ändra fjärrkontroll -ID för att förhindra
oönskad funktion. Om du har ändrat fjärrkontrollens ID
måste du kontrollera att du valt samma ID för
huvudenheten.
Standardinställningen är ID1.
1 Inställning av fjärrkontrollen
För att ändra ID från ID1 till ID2, Tryck och håll på
den röda knappen och 2 och sifferknappen
samtidigt i 7 sekunder. För att ändra ID från ID2 till
ID1, tryck och håll den röda knappen och 1
sifferknappen samtidigt i 7 sekunder.
2 Huvudenhetsinställning
Håll och på frontpanelen
intryckta samtidigt i 2 sekunder så visas det aktuella
ID:t när:
Ingen skiva i den här spelaren.
Skivfacket är stängt.
Uppspelningen stoppas.
”NO DISC” visas på displayen på frontpanelen.
Fortsätt att trycka och håll tangenterna i ytterligare
2 sekunder för att ändra ID mellan ID1 och ID2.
Om fjärrkontrollen är utan batterier i några minuter
eller om de förbrukade batterierna får sitta kvar i
fjärrkontrollen, ställs fjärrkontroll-ID in automatiskt
till ID1. Om du vill använda fjärrkontrollen i ID2
inställning, installera nya batterier och ställ in
fjärrkontrollens ID igen.
När spelaren återställs, kommer dess fjärrkontroll -
ID vara ID1.
Kommentarer
1
3
22
USB
SA-CD
30°30°
Fjärrkontrollsensor
6 m
Kommentarer
11 Sv
Anslutning
2
Svenska
ANSLUTNING
Gör motsvarande video/ljudkabelanslutningar beroende på den utrustning som du vill använda.
Se sida 35 för information angående format för ljud-/videoutmatning.
Förbered kommersiellt tillgängliga kablar som krävs för anslutning. Typen och antalet kablar som behövs varierar
beroende på vilken utrustning som ska anslutas.
Få glädje av video/ljud genom att använda en TV och en AV-mottagare
Se ”Ansluta till en TV via en AV-mottagare” (s. 12).
Njut av video/ljud med bara en TV
Se ”Anslutning till en TV direkt” (s. 12).
Upplev glädjen med video/ljud genom att använda en TV och ljudutrustning
Se ”Anslutning till en TV-och ljudutrustning” (s. 13).
Om HDMI
Få att få glädje av högkvalitativ video och digitalt ljud via
HDMI-uttaget, använda kommersiellt tillgängliga
HÖGHASTIGHET HDMI-kablar som har HDMI-
logotypen (som visas på baksidan).
För information om HDMI-kontrollfunktion, se
”HDMI-kontroll” (s. 30).
Om du vill ändra utgående läge för HDMI terminal,
konfigurera ”HDMI” (s. 34) i Ljudinställning.
Anslutning för uppspelning av Blu-ray-
skivor i 3D
För att få glädje av Blu-ray-skivor i 3D på den här
spelaren, måste systemet uppfylla följande villkor.
Din TV- och AV-mottagare (om tillgänglig) måste
stödja 3D-funktionen.
3D uppspelning i Display inställningar (s. 32) är
inställd på ”Auto”.
Video-/ljudanslutningar
Tips
USB
5#%&
Denna spelare
AV-mottagare
TV
Video (HDMI)Video/ljud
(HDMI)
Högtalare
Ljud
USB
5#%&
Denna spelare
TV
Video/ljud
(HDMI)
USB
5#%&
Denna spelare
TV
Video (HDMI)
Ljud
(koaxialt, optiskt eller analogt)
Ljudutrustning
(såsom soundbar)
Tips
12 Sv
Video-/ljudanslutningar
Anslutning till en TV-apparat via
en AV-mottagare
Anslut spelaren till AV-mottagaren och AV-mottagaren
till TV-apparaten med HDMI-kablar.
För information om högtalaranslutningar, se
ägarmanualen för mottagare och högtalare.
Observera!
Anslut inte spelarens strömkabel innan
alla andra anslutningar har gjorts.
Anslutning till en TV-apparat
direkt
Anslut spelaren till TV-apparaten med en HDMI-kabel.
Observera!
Anslut inte spelarens strömkabel innan
alla andra anslutningar har gjorts.
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT
NETWORK
USB
HDMI
HDMI IN
HDMI OUT
HDMI IN
HDMI
Denna spelare
AV-mottagare
TV
HDMI-terminal
Högtalare
HDMI-kabel
HDMI-ingång
HDMI-kabel
HDMI-utgång
HDMI-ingång
Högtalaranslut-
ningar
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT
NETWORK
USB
HDMI
HDMI
HDMI IN
Denna spelare
TV
HDMI-terminal
HDMI-kabel
HDMI-ingång
13 Sv
Video-/ljudanslutningar
Anslutning
2
Svenska
Anslutning till en TV- och ljudutrustning
Anslut spelaren till TV-apparaten med en HDMI-kabel, och spelaren till ljudutrustningen med en ljudkabel (digital
optisk, digital koaxial eller stereostiftkabel).
Observera!
Anslut inte spelarens strömkabel innan alla andra anslutningar har gjorts.
Om du vill ändra utmatningsläget COAXIAL/OPTICAL uttag, konfigurera ”Koaxial / Optisk” (s. 34) i
ljudinställningar.
Om uppspelningsljudet matas ut från både TV-högtalarna och ljudutrustning, ställ in HDMI i ljudinställning till
Av för att avaktivera ljudutgången till TV-apparaten.
Ljudsignaler av SACD-skivor kan inte spelas upp genom COAXIAL eller OPTICAL uttaget (s. 35).
Tips
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT
NETWORK
USB
HDMI
HDMI
HDMI IN
COAXIAL
OPTICAL
AUDIO OUT
COAXIAL OPTICALAUDIO
Denna spelare
TV
OPTICAL, COAXIAL eller
AUDIO OUT L/R uttag
Ljudkabel
(digital optisk, digital koaxial eller
stereostiftkabel).
Ljudingång
(digital optisk, digital koaxial
eller stereostiftkabel)
Ljudutrustning
(såsom soundbar)
HDMI-ingång
HDMI-kabel
HDMI utgång
14 Sv
Genom att ansluta denna spelare till nätverket (trådlöst eller trådbundet), kan du använda följande funktioner.
Spela upp innehållet i DLNA-server (PC eller NAS) (s. 19)
Uppspelning av olika innehåll i nätverkstjänster (s. 21)
Spelar BD-LIVE-kompatibla skivor (s. 25)
Användning av denna spelare från mobila enheter (AV KONTROLLER) (s. 22)
Om du vill använda nätverkstjänster eller BD-Live-funktionen, krävs en bredbandsanslutning.
Se manualen till den här utrustning du då den anslutna utrustningen och anslutningsmetoden kan variera beroende
på din nätverksmiljö.
Använd en nätverkskabel/router som stöder 10BASE-T/100BASE-TX.
Om du använder en router som stöder DHCP behöver du inte konfigurera några nätverksinställningar för den här
spelaren, då nätverksparametrarna (t.ex. IP-adress) kommer automatiskt att tilldelas den. Du behöver bara
konfigurera nätverksinställningarna om din router inte stöder DHCP eller om du vill konfigurera
nätverksparametrarna manuellt (s. 32).
Trådlös anslutning
Genom att använda Wi-Fi-funktionen på denna spelare,
kan du ansluta den här spelaren till ditt nätverk (router)
trådlöst. Om du vill använda Wi-Fi-funktionen, se
”Trådlös anslutningsinställning” (s. 18) och konfigurera
den trådlösa anslutningsinställningen.
Trådbunden anslutning
Anslut spelaren till nätverket (router) med en
kommersiellt tillgänglig partvinnad (STP) nätverkskabel.
Nätverksanslutningen
Kommentarer
Tips
USB
5#%&
Denna spelare
Internet Modem Router Dator
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT
NETWORK
USB
HDMI
REMOTE
C
OUT
LAN
NETWORK
Denna spelare
Internet Modem Router Dator
NÄTVERKS
terminal
Nätverkskabel
LAN terminal
15 Sv
Nätverksanslutningen
Anslutning
2
Svenska
Inställning av DLNA server
Genom att använda DLNA kan du dela multimediainnehåll (t.ex. filmer, musik och foton) som lagrats på en DLNA-
server (PC eller NAS) som är ansluten till ditt nätverk, och få glädje av dessa innehåll med denna spelare.
Dessutom kan du använda din mobila enhet (till exempel en smarttelefon och en handdator) som en trådlös handkontroll
för att styra denna spelare via nätverket.
Om du vill använda DLNA funktioner, utför följande inställningar för DLNA-server efter att ha anslutit dig till nätverket
(s. 14).
För att använda DLNA funktionerna måste alla enheter vara anslutna till samma nätverk.
För att använda en NAS som en DLNA-server, måste NAS vara kompatibel med DLNA.
Inställning av mediadelning på DLNA
server
För att spela upp multimediainnehåll lagrat på din DLNA-
server (PC eller NAS), måste du först konfigurera
mediadelningen på DLNA-server installerad på DLNA-
servern.
För information om inställning av DLNA-server
eller filformat som stöds av DLNA-server se
ägarmanualen för din DLNA-server och dess
programvara.
1 Slå på din DLNA-server (PC eller NAS) och spelaren.
2 Om du använder en dator som en DLNA-server,
kontrollera att programvaran för DLNA-server (t.ex.
Windows Media Player 12) är installerad på din dator.
3 På din DLNA-server, aktivera mediedelning och låt
media delas med den här spelaren.
Nu är inställningen av DLNA servern klar. För att få
glädje av innehållet i DLNA-server på denna spelare,
välj en DLNA-server och multimedia-fil från HOME
menyn (s. 19).
Använda en mobil enhet som media-
kontroller
Om du har en mobil enhet (t.ex. en smarttelefon och
surfplatta ) som stöder Digital Media Controller (DMC)-
funktionen, kan du använda den här spelaren från din
smarttelefon eller surfplatta via nätverket.
För att kunna styra denna spelare från den mobila
enheten, ställ DMC kontroll (s. 32) i SETUP menyn
Möjliggöra (standard).
För att kontrollera att din mobila enhet stöder DMC-
funktionen, se i manualen för din mobila enhet och
dess programvara.
Kommentarer
USB
5#%&
DLNA
Denna spelare
DLNA server
(PC eller NAS)
Fjärrkontroll Kontroller
(mobila enheten)
Tips Tips
16 Sv
Genom att ansluta ett USB-minnesenhet till USB-anslutningen på framsidan eller baksidan av spelaren, kan du spela
flera mediefiler lagrade på USB-minnet (s. 19).
Yamaha kan inte garantera att alla märken av USB-minnen kommer att fungera med denna spelare.
Anslut ett USB-minne till en av USB-portarna (fram/bak) på spelaren när du använder BD-Live-funktionen (s. 26).
USB anslutning
Kommentarer
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT
NETWORK
USB
HDMI
USB
USB
USB
Denna spelare
USB-kontakt (framsida)
Denna spelare
USB-minne
USB-kontakt (baksida)
USB-minne
17 Sv
Anslutning
2
Svenska
Anslutning till REMOTE
CONTROL uttag
Du kan sända och ta emot signaler från
fjärrkontrollen genom att ansluta till REMOTE
CONTROL (OUT/IN) uttagen.
Anslut säkert enkanalig (mono) 3,5 mm
minikontaktkablar (finns i handeln) till REMOTE
CONTROL (OUT/IN) uttagen.
Om din AV-mottagare är en Yamaha-produkt och
har förmågan att överföra SCENE styrsignaler från
FJÄRR utgångsuttag, kan du styra spelaren med den
SCENE funktionen.
Observera!
Anslut inte spelarens strömkabel innan
alla andra anslutningar har gjorts.
För mer information om SCENE funktionen, se
manualen som medföljer Yamaha mottagaren.
Du kan ansluta en Yamaha-komponent (t.ex. CD-
spelare) som stöder SCENE fungera till REMOTE
CONTROL (OUT) uttaget på denna spelare.
Ansluta nätkabeln
Efter att alla anslutningar är färdigställda, ansluter
du den medföljande nätkabeln till AC IN på
spelarens baksida. Anslut den sedan till ett nätuttag.
Andra anslutningar
NETWORK
USB
REMOTE CONTROL
OUT IN
REMOTE CONTROL IN
REMOTE CONTROL OUT
Denna spelare
Till REMOTE
CONTROL (IN)
uttaget
Enkanalig 3,5 mm
minikontaktkabel
Till
fjärrkontrollens
utgång
Yamaha komponent
Till fjärr-
kontroll-
ingång
Enkanalig 3,5 mm
minikontaktkabel
Infraröd signalmottagare
eller Yamaha komponent
(såsom AV-mottagare)
Till REMOTE
CONTROL
(OUT) uttaget
Tips
AC IN
Till nätuttag
18 Sv
SPELA UPP
Inställning med snabbinstallation
Med Easy Setup (Enkel inställning) kan du ställa in språk,
upplösning och bildförhållande på ett enkelt sätt.
Snabbinstallation skärmen visas när du sätter på denna
spelare för första gången efter inköpet. Samma inställning
kan göras från SETUP menyn = System =
Snabbinstallation.
1 När Snabbinstallation skärmen visas, tryck på ENTER
för att starta Snabbinstallation.
2 Ställ in språk, upplösning och bildförhållande genom
att följa meddelandena på skärmen.
När ingen bild visas efter Snabbinstallation är klar,
se ”Felsökning” (s. 39).
Ett varningsmeddelande med avseende på
uppspelning av 3D-video visas när denna spelare är
på. Tryck på ENTER för att hoppa förbi
meddelandet eller CLEAR att inaktivera det (s. 30).
Inställning av trådlös anslutning
För att ansluta den här spelaren till ditt trådlösa nätverk
(router), följ anvisningarna nedan för att konfigurera den
trådlösa anslutningsinställningen.
Om din router (åtkomstpunkt) stöder WPS (Wi-Fi
skyddad inställning) funktionen, kan du använda metoden
Automatisk inställning för att ansluta denna spelare till
routern utan att ange nätverksinformation (t.ex. SSID)
manuellt.
1 Tryck på SETUP för att visa SETUP menyskärmen.
2 Välj Allmäna Inställningar = Nätverk = Välj typ av
anslutning = Trådlös.
3 Tryck 2/3 för att välja Ja, tryck sedan på ENTER.
4 Tryck 2/3 för att välja en av de följande
installationsmetoderna, tryck sedan på ENTER.
Sök trådlöst nätverk: Välj detta alternativ för att söka
efter tillgängliga trådlösa nätverk. När listan med nätverk
visas, välj SSID som ska anslutas och ange lösenordet.
Manual: Välj det här alternativet för att ange nätverkets
information (t.ex. SSID) manuellt.
Auto: Välj det här alternativet om du vill använda WPS-
funktionen. Välj PBC (Tryckknappen för konfiguration)
eller PIN-kod metoden, följ sedan meddelandena på
skärmen.
Mer information om funktioner för routern
(åtkomstpunkt), se manualen.
När WPS-funktionen inte fungerar, väljer du ”Sök
trådlöst nätverk” eller ”Manual” för att konfigurera
de trådlösa anslutningsinställningarna.
Enheter som använder ett frekvensband på 2,4 GHz,
t.ex. en mikrovågsugn, Bluetooth, eller digitalt
trådlös enhet kan störa den trådlösa
kommunikationen. Flytta den här spelaren bort från
sådana anordningar, eller stäng av dessa.
Hastigheten för en trådlös nätverksanslutning beror
på nätverksmiljön (router typ, avståndet mellan
routern och den här spelaren, installationsplatser,
etc.). Om ljudet eller videon avbryts under
uppspelningen, flytta spelaren närmare routern eller
ändra riktning på spelaren eller antennen på routern.
Initial inställning
Kommentarer
Kommentarer
19 Sv
Spela upp
3
Svenska
Menyn HOME gör att du kan utföra följande grundläggande funktioner med denna spelare.
Bläddra och spela multimedia-filer på olika skivor, USB-minnen och dina DLNA-servrar (PC eller NAS)
Åtkomst till olika nättjänster (s. 21)
Visning av SETUP menyn (s. 27)
Information om uppspelningsbara skivor och format finns på sidan 3.
För att spela innehållet från DLNA-server på denna spelare, bör mediadelning (s. 15) på DLNA-servern
konfigureras.
Spela upp foton/musik/video
Grundläggande funktioner
2/3/5/a: Flyttar på fokuset.
2: Återgår till den överordnade mappen.
HOME: Flyttar till/utgångar på HOME menyskärmen.
ENTER: Bekräftar mappen/filen.
Vanliga åtgärder för uppspelning av
filer i en vald mapp
Exempel: Välja en filmfil på ett USB-minne
Stoppa uppspelningen av videon innan du flyttar till
HOME menyskärmen.
1 Tryck på HOME för att flytta till HOME
menyskärmen.
2 Tryck på 5/a för att välja det alternativ som
innehåller den fil du vill spela upp och tryck sedan på
ENTER.
Om din DLNA server inte finns på listan, kontrollera
att DLNA-servern är påslagen och välj DLNA
Sökning för att uppdatera listan.
3 Välj Foto, Musik, Video eller AVCHD mappen som du
vill spela upp, tryck sedan ENTER.
För att återgå till den överordnade mappen, tryck på
RETURN eller välj .
HOME meny
Tips
Kommentar
MIRACAST
PIP
HOME
2ND
AUDIO
ENTER
TOP MENU
RETURN ON SCREEN
POP-UP MENU
SETUP
Kommentar
Fortsättning på nästa sida. \
20 Sv
HOME meny
Observera att endast den filtyp som väljs i detta steg
visas i följande steg. Till exempel, om du har valt
Foto mappen i detta steg visas endast foto filer.
4 Välj den mapp som innehåller den fil du vill spela upp.
5 Välj den fil du vill spela upp och tryck sedan på
ENTER.
När en videofil väljs, startar uppspelningen.
När en musikfil väljs, visas statusskärmen och
uppspelningen påbörjas.
När en fotofil väljs, startar bildspelet.
För att få glädje av bildspelet med musik, tryck på
HOME för att återgå till HOME menyskärmen
medan musiken spelas upp, och välj foto-filen.
Den visade filen kanske inte spelas upp beroende på
innehållet.
Funktioner för visning av foton
När du visar foton fungerar knapparna på fjärrkontrollen
enligt följande.
: Stoppar bildspelet och återgår till fillistan.
: Gör paus i ett bildspel.
: Spelar upp ett bildspel.
: Flyttar till nästa foto.
: Flyttar till föregående foto.
: Gör ett bildspel snabbare i 3 steg.
: Gör ett bildspel ngsammare i 3 steg.
5: Inverterar en bild.
a: Reflekterar en bild.
2: Rotera ett foto motsols.
3: Roterar en bild medurs.
ZOOM: Zoomar in/ut en bild (zooma in / ut: 3 steg
vardera).
5/a/2/3: Panorerar i zoom-läge när en bild är större
än skärmen.
Kommentar
Tips
Kommentar
21 Sv
Spela upp
3
Svenska
Du kan ha glädje av multimedia innehållet (t.ex. bilder och videoklipp) med hjälp av följande nättjänster.
Dropbox
Picasa Webbalbum
YouTube
För att få tillgång till innehåll som tillhandahålls av tredje part behövs en snabb Internetuppkoppling. Eventuellt
krävs även en registrering av konto och ett betalt abonnemang.
Tjänster från tredje part kan ändras, stängas av, avbrytas eller pausas när som helst utan föregående meddelande.
Yamaha frånsäger sig allt ansvar vid sådana händelser.
En del innehåll kan enbart vara tillgängligt för vissa länder och kan presenteras på vissa bestämda språk.
Yamaha kan inte garantera att tjänster kommer fortsätta att tillhandahållas eller vara tillgängliga för en given
tidsperiod, och Yamaha frånsäger sig varje sådant garantianspråk, uttalat eller underförstått.
1 Tryck på HOME för att flytta till HOME
menyskärmen.
För att direkt flytta till YouTube menyn tryck på
YouTube.
2 Tryck 5/a att välja nätverkstjänster, tryck sedan på
ENTER.
3 Tryck på 2/3/5/a för att välja önskad nättjänst, tryck
sedan på ENTER.
4 Tryck på 2/3/5/a för att välja ett objekt och tryck
sedan på ENTER för att bekräfta valet (eller starta
uppspelningen).
För att utgå från en nättjänst, tryck på HOME.
Användningsförfaranden efter steg 4 varierar
beroende på menyposten som varje tjänst
tillhandahåller.
Om Dropbox™
Dropbox är en nättjänst som gör att du kan sätta in dina
grejer i Dropbox och hämta det från dina datorer, telefoner
eller handdatorer. Lägg automatiskt till bilder och visa upp
video från var som helst.
Mer information på www.dropbox.com
OmPicasa™ Webbalbum
Picasa Webbalbum är en nättjänst som gör att användare
kan dela foton med vänner och familj, eller offentliga
bilder med Explorer.
Mer information finns på picasaweb.google.com
Om YouTube™
YouTube är en nättjänst som gör att användare kan
upptäcka, titta på och dela ursprungligt videomaterial som
skapats över Internet.
Mer information på www.youtube.com
Använda nätverkstjänster
Kommentarer
Tips
Tips
Kommentar
Dropbox är ett varumärke för Dropbox Inc.
Picasa och Picasa logotypen är varumärken som tillhör
Google. Inc.
YouTube och YouTube logotypen är varumärken som
tillhör Google. Inc.
22 Sv
Miracast är en lösning för att sömlöst visa video mellan enheter, utan kablar eller en nätverksanslutning via en
åtkomstpunkt (Wi-Fi Direkt). Du kan göra saker som att visa bilder från en Miracast-kompatibel enhet (smarttelefon,
etc.) på skärmen för TV som är ansluten till denna spelare.
För att kontrollera om din enhet är Miracast kompatibel, se manualen för enheten.
När Miracast är aktiverad på denna spelare, är andra nätverksfunktioner (till exempel DLNA) inte tillgängliga.
1 Tryck på MIRACAST.
2 Inom 60 sekunder, använd din smarttelefon för att
möjliggöra Miracast och markera den här spelaren som
den enhet som ska anslutas.
Mer information om funktioner i din smarttelefon, se i
manualen.
3 För att lämna Miracast, tryck på MIRACAST.
Du kan också lämna Miracast genom att trycka på
HOME eller RETURN.
Genom att använda programmet ”AV CONTROLLER” på din mobila enhet, kan du använda den mobila enheten som
fjärrkontroll och styra den här spelaren från den.
Du kan styra de grundläggande funktionerna på Yamaha Blu-ray Disc™-spelaren såsom spela, pausa, hoppa över,
ström på och markören navigering.
Programmet ”AV CONTROLLER” finns tillgänglig på många språk.
För mer information om ”AV CONTROLLER”, besök Yamahas webbplats.
Använd smarttelefon med bilder och videoklipp på TV-skärmen
(Miracast™)
Kommentarer
USB
5#%&
Miracast-Kompatibel
enhet
(smarttelefon, etc.)
Denna spelare
TV
Tips
Beroende på miljön kan ljud/video avbrytas eller brus kan visas på TV-skärmen. I det här fallet, kan du prova följande
lösningar.
Flytta Miracast enheten närmare spelaren.
Stäng av andra trådlösa enheter som inte används.
Flytta på Miracast enheten och denna spelare bort från mikrovågsugnar, Bluetooth-enheter eller andra trådlösa
enheter.
Användning av denna spelare från mobila enheter
(AV CONTROLLER)
AV CONTROLLER
23 Sv
Spela upp
3
Svenska
Detta kapitel förklarar uppspelning av kommersiellt
tillgängliga Blu-ray-skivor, DVD-skivor, SA-CD, CD och
inspelade DVD-RW / R-skivor.
Grundläggande uppspelningsfunktioner förklaras på
sida 8.
Skärmmeny
För att visa på skärmmenyn, tryck ON SCREEN. Efter
att ha tryckt 5/a/2/3 välj ett objekt, tryck sedan på
ENTER för att styra den önskade funktionen.
Skärmmenyn innehåller följande objekt.
Titel : Visar titelns nummer som
spelas upp. Du kan hoppa till den önskade titeln genom att
välja den här.
Kapitel : Visar kapitelnummer som
spelas upp. Du kan hoppa till det önskade kapitlet genom
att välja det här.
Spår/Fil : Visar spår/
fil som spelas upp. Du kan hoppa till önskat spår/fil
genom att välja det här.
Tid : Visar
uppspelningstid. Välj hur tiden visas från följande
alternativ:
Spelad tid för titeln, kapitlet, skivan, spåret eller
filen
Återstående tid för titeln, kapitlet, skivan, spåret
eller filen
Mode/Spelläge
: Visar aktuellt
uppspelningsläge. Du kan välja uppspelningsläge från
följande alternativ:
Normal: Normal uppspelning.
Shuffle: Slumpvis uppspelning utan upprepning.
Random: Slumpvis uppspelning med upprepning.
Normal
Shuffle CH (kapitel)
Shuffle TT (titel)
Shuffle Alla
Random CH (kapitel)
Random TT (titel)
Random Alla
Normal
Shuffle F (mapp)
Random F (mapp)
Ljud : Visar ljudspråk/signal från
en Blu-ray-skiva/ DVD som valts. Det går att välja önskad
typ av ljud.
Vinkel : Visar den för tillfället valda
vinkelnummer. Om videon spelats in med olika vinklar
går det att växla mellan dessa.
Textning : Visar den för tillfället
valda textspråk när undertexten tillhandahålls.
Subtitle Style : Visar den för tillfället valda stilen
på undertexten. Denna funktion är endast tillgänglig för
externa undertexter i videofiler. Du kan välja önskad
textstil för undertexter.
Bitrate : Visar
bithastigheten på ljud-/videosignalen.
Second Video : Slår PIP (Bild-i-bild) på/av (s. 8).
Second Audio : Slår det sekundära ljudet på/av
(s. 8).
Ins sök
: Hoppar 30
sekunder.
Ins återuppspelning
: Spelar upp innehåll
sedan 10 sekunder tidigare .
CC Val
: Ställer in den visade dolda texten.
Bildspel :
Visar hastigheten för bildspel. Du kan välja hastigheten i
bildspelet från Långsam/Medium/Snabb.
Övergång : Visar hur bilden visas på skärmen.
Du kan välja en övergångstyp.
Codepage : Väljer teckenkod av undertexten
du lagt till DivX-video (s. 41).
Avancerade uppspelningsfunktioner
Kommentar
BD
DVD
BD
DVD
CD
PHOTO
BD
DVD
CD
MUSIC
DVD
CD
PHOTO
CD
DVD
VIDEO MUSIC PHOTO
BD
DVD VIDEO
BD
DVD
BD
DVD VIDEO
BD
BD DVD CD VIDEO MUSIC
BD
BD
BD DVD CD VIDEO MUSIC
BD
DVD
CD
MUSIC
BD DVD
PHOTO
PHOTO
VIDEO
24 Sv
Avancerade uppspelningsfunktioner
Statusmeny
Detta visar olika inställningar, t.ex. undertexter,
vinkelinställningar och den titel/kapitel/spårnummer som
spelas upp. Visa statusmenyn genom att trycka på
STATUS. Statusmenyn innehåller följande menyer.
Exempel: Ikoner när du spelar en Blu-ray-skiva
1 (Uppspelningsstatus)
2 (Ikon för skivtyp/videofil)
3 (Titelnummer som spelas upp): Du kan hoppa
till angiven titel med SEARCH knappen (s. 9).
4 (Kapitelnummer som spelas upp): Du kan
hoppa till angivet kapitlet med SEARCH knappen
(s. 9).
5 (Förfluten speltid): Du kan hoppa till angiven
punkt med SEARCH knappen (s. 9).
6
(Upprepningsläge):
Visar aktuellt upprepningsläge
(s. 8).
7 (Valt ljud för närvarande): Du kan ändra
ljudspråket eller formatet med AUDIO knappen.
8 (Vald undertext ): Du kan ändra språket för
texten med SUBTITLE knappen.
Exempel: Ikoner vid uppspelning av musikfiler
1 (Uppspelningsstatus)
2
(Upprepningsläge):
Visar aktuellt upprepningsläge
(s. 8).
3 (Ikon för skivtyp/musikfil)
4 (Omslag) : Visar omslag om filen innehåller
det.
5 (Spår-/filnummer som spelas upp): Du kan
hoppa till angivet spår med SEARCH knappen (s. 9).
6 (Information) : Visar musikinformation om
filen innehåller det.
7 (Förfluten speltid): Du kan hoppa till angiven
punkt med SEARCH knappen (s. 9).
8 (Förloppsindikator) : Visar förloppsstatus
för den aktuella låten.
1 (Uppspelningsstatus)
2 (Ikon för fotofil)
3 (Filnummer som visas)
4
(Upprepningsläge):
Visar aktuellt upprepningsläge
(s. 8).
5 (Bildspelets hastighet)
BD
DVD
VIDEO
1 2 3 4 5
6 7 8
DVD
CD
MUSIC
MUSIC
PHOTO
1 2 3 4 5
25 Sv
Avancerade uppspelningsfunktioner
Spela upp
3
Svenska
Programmerad
uppspelning
Denna funktion låter dig programmera
uppspelningsordningen för skivans ljudspår eller DVD-
kapitel.
Tryck på PROGRAM under uppspelning för att visa
PROGRAM fönstret och programmera
uppspelningsordning.
Du kan programmera högst 15 spår/kapitel.
Exempel: Programmera uppspelningsordning för CD-
spår
1 Tryck på PROGRAM under uppspelning.
2 Tryck på ENTER för att programmera
uppspelordningen.
För ljudskiva, tryck på 5/a för att välja önskat spår
och tryck ENTER.
För DVD-videoskiva, välj önskad titel (visas som TT)
och kapitel (visad som CH) istället för ett spår.
För att radera ett inställt spår, välj det spår du vill
radera, tryck sedan på CLEAR.
Tryck på RETURN att avbryta programmerad
uppspelning.
3 När programmeringen är klar trycker du på för att
ställa in och starta programmerad uppspelning.
4 Avbryt programmerad uppspelning genom att stoppa
uppspelning helt, tryck på .
Använda sökning
Med denna funktion kan du hoppa till en angiven plats
under uppspelning.
1 Tryck på SEARCH under uppspelning. Statusraden
visas.
2 Tryck på 5/a/2/3 för att välja ett av objekten, tryck
sedan på ENTER.
:
Titelnummer (visas som )
Kapitelnummer (visas som )
Spelad tid (visas som )
Spelad kapiteltid (visas som )
:
Spårnummer (visas som )
Spelad spårtid (visas som )
Spelad skivtid (visas som )
:
Filnummer (visas som )
Spelad filtid (visas som )
:
Filnummer (visas som )
3 Tryck på 5/a eller sifferknapparna för att ställa in/
justera värdet för det fokuserade objektet och tryck
ENTER för att hoppa till den angivna punkten.
4 För att stänga statusfältet tryck STATUS.
Glädje av BONUSVIEW™ and BD-
Live™
Denna spelare stödjer uppspelningsfunktioner för
BONUSVIEW (s. 41) (BD-ROM Profile 1 Version 1.1)
och BD-Live (s. 41) (BD-ROM Profile 2).
Funktioner och uppspelningsmetod kan variera
beroende på skivan. Se vägledningen på skivan eller
den medföljande handboken.
DVD CD
Kommentar
BD
DVD
CD
MUSIC
PHOTO
BD DVD
CD
VIDEO MUSIC
PHOTO
26 Sv
Avancerade uppspelningsfunktioner
Använda bild-i-bild-funktionen
(uppspelning av sekundärt ljud/
video)
BD-video som innehåller sekundärt ljud och video och är
kompatibel med bild-i-bild-visning, kan spelas av med
sekundärt ljud och video samtidigt som en liten bildruta i
hörnet.
Medan Bild-i Bild ikonen ( ) eller
sekundära ljudikonen ( ) visas, tryck
på PIP att slå på/av Bild-i-bild (PIP)-
funktionen.
För att lyssna på det sekundära ljudet, se till att
Ljudutgång inställning (Koaxial / Optisk eller
HDMI) är inställd på PCM eller Reencode (s. 34).
Beroende på skiva kanske du måste aktivera
sekundärt ljud i skivans översta meny för att lyssna
på sekundärt ljud (s. 9).
Beroende på innehållet kan det hända att sekundärt
ljud och video för bild-i-bild-visning spelas upp och
tas bort automatiskt. Vidare kan spelbara områden
vara begränsade.
Använda funktionen för BD-Live™
1. Ställ in nätverksinställningen
(s. 31).
2. Anslut USB-minnesenhet till denna
spelare (s. 16).
BD-Live-data sparas i ett USB-minne anslutet till
spelaren. För att du ska få glädje av dessa funktioner,
anslut ett USB-minnesenhet som stöder USB 2.0
höghastighet (480 Mbits/sek) till en av USB-
portarna (fram/bak) på denna spelare för att använda
USB-minnet som.Lagringsplats.
Lokal lagring används som ett extra minne när Blu-
ray-skivan spelas upp.
Använd ett USB-minnesenhet med minst 2 GB
ledigt utrymme.
BUDA-mappen skapas automatiskt i USB-
minnesenheten vid behov.
Data kopieras/nedladdas inte om lagringsutrymmet
är otillräckligt. Radera onödiga data eller använd ett
nytt USB-minne.
Laddning (läsning/skrivning) av data kan ta en tid.
Yamaha kan inte garantera att alla märken av USB-
minnen kommer att fungera med denna spelare.
Använd inte en USB-förlängningskabel vid
anslutning av ett USB-minne till USB-kontakten på
spelaren. Användning av en USB-förlängningskabel
kan hindra spelaren från att fungera korrekt.
3. Spela upp skivan.
4. Kör BD-Live enligt instruktionerna
på skivan.
Ta inte bort USB-minnet eller koppla dra ur elsladden
under BD-Live-funktioner.
Vad gäller uppspelningsmetoden för innehållet i BD-
Live, etc., utöva verksamheten i enlighet med
instruktionerna i manualen för Blu-ray-skivan.
För att dra nytta av BD-Live-funktioner, utför
nätverksanslutningen (s. 14) och
nätverksinställningarna (s. 31).
Se ”BD-Live anslutning” (s. 32) angående
inställningen för att begränsa åtkomst till innehållet i
BD-Live.
Den tid som krävs för att ladda ned de medföljande
programmen i USB-minnet som är ansluten till
spelaren varierar beroende på de hastigheter som
Internet-anslutning och datavolymen av programmen.
BD-Live-program som tillhandahålls via Internet
kanske inte kan visa anslutningen beroende på status
(uppgradering) från leverantören. Ta i sådana fall ut
skivan och försök igen.
Om BD-Live-skärmen inte visas efter en stund efter
att du valt BD-Live-funktionen i Blu-ray-
skivmenyn, kan det vara så att USB-minnet inte har
tillräckligt med ledigt utrymme. I sådana fall, ta ut
skivan ur spelaren och radera sedan data i USB-
minnesenhet med ”Format” menyn i ”Lagringsplats”
(s. 30).
Kommentarer
Primär video Sekundär video
Kommentarer
Kommentarer
27 Sv
Inställningar
4
Svenska
INSTÄLLNINGAR
Menyn SETUP möjliggör olika ljud-/visuella inställningar för funktioner med hjälp av fjärrkontrollen.
SETUP meny
Meny/undermeny Objekt Funktion Sidan
Allmäna
Inställningar
System Automatisk
avstängning
Ställer in energisparfunktionen till på/av.
30
HDMI Control Ställer in spelaren för att ta emot kontrollsignalen från
fjärrkontrollen på TV/AV-mottagaren.
30
Ladda Default Återställer alla inställningar till grundinställningen utom
säkerhetsinställningen.
30
Uppgradera Uppgraderar spelaren. 30
Meddelande om
uppdatering
Välj om det ska visa meddelande på skärmen när denna
spelare upptäcker nyare programvara över Internet.
30
Meddelande vid 3D
uppspelning
Visar ett varningsmeddelande med avseende på uppspelning
av 3D-video när denna spelare är påslagen.
30
Lagringsplats Visar ledigt utrymme på USB-minnesenhet ansluten till
spelaren, eller formaterar ”BUDA” mapp i USB-minnet.
30
Snabbinstallation Ställer in språk, upplösning, skärmformat. 30
Språk OSD Väljer språk för visning på skärmen. 30
Meny Prioriterar språket för skivmenyn. 31
Ljud Prioriterar språket för ljud. 31
Textning Prioriterar språket för undertexter. 31
Spela upp Automatisk
skivuppspelning
Ställer in spelaren på att starta skivuppspelning automatiskt.
31
Kameravinkel Ställer in för att visa Kameravinkel när Blu-ray-skivan/DVD
med multipla vinklar spelas upp.
31
Bild i Bild Ställer in för att visa Bild i Bild när Blu-ray-skivan/DVD
med Bild i bild spelas upp.
31
Secondary Audio Ställer in för att visa Secondary Audio när Blu-ray skivan/
DVD med sekundärt ljud spelas upp.
31
Last Memory Ställer in denna spelare att komma ihåg den sista platsen för
uppspelning av skivan (Blu-ray eller DVD-video)r den är
inställd på vänteläge eller att skivfacket öppnas.
31
DivX (R) VOD
DRM
Visar registreringskoden för DivX (R) video.
31
DivX® Subtitle Anger om den ska visa en undertext till DivX (R) video. 31
Säkerhet Ändra lösenord Ändrar lösenordet för Föräldrakontroll och Landskod. 31
Föräldrakontroll Ställer in Föräldrakontroll beroende på skivans innehåll. 31
Landskod Ställer in din Landskod. 31
Nätverk Välj typ av
anslutning
Ställer in en nätverksanslutningsmetod.
31
Information Visar skärmen med nätverksinformation. 31
Anslutningstest Utför nätverksanslutningstest. 32
IP inställningar Anger IP-inställningen till Auto/Manual. 32
Proxyinställning Ställer in proxy-inställningen. 32
Nätverkskontroll Ställer in kontrollen för enheter som är anslutna via Ethernet,
till På/Av.
32
Network Standby Väljer om denna spelare kan slås på från andra
nätverksenheter.
32
DMC kontroll Väljer om den ska tillåta DLNA-kompatibel Digitala Media
Kontroller (DMC) (s. 15) kontrollera denna spelare.
32
BD-Live anslutning Ställer in BD-Live-anslutning tillTillåten/Delvis Tillåten/
Förbjuden.
32
28 Sv
SETUP meny
Display
inställningar
TV 3D uppspelning Väljer 3D- eller 2D-video. 32
TV Screen Ställer in skärmformatet för den anslutna TV:n och justerar
videoutmatningen.
32
HDMI Upplösning ljer HDMI-videoupplösning. 33
TVsystem Väljer TV-system frånNTSC/PAL/Multi. 33
Färgrymd Väljer färgutrymme från YCbCr 4:4:4/YCbCr 4:2:2/Full
RGB/RGB.
33
HDMI Deep Color Väljer HDMI Deep Color från 30 bits/36 bits/48 bits / Av. 33
HDMI 1080p 24Hz Ställer in HDMI 1080p 24Hz till auto/av. 33
Video Process Brusreducering Anger nivån för brusreducering. 33
De-interlacing läge Ställer in hur du vill känna av videosignalen. 33
Textning CC Egenskaper Ställer in utseendet på parentestextning. 33
Font färg
Font storlek
Font stil
Font opacitet
Font skärpa
Tecken med
kantfärg
Bakgrundsfärg
Bakgrundsopacitet
Färg på fönstret
Fönstrets opacitet
Anpassa teckensnitt, bakgrund och fönster som används för
parentestextning när CC Egenskaper är inställd på
Anpassning.
33
Ljudinställning
Ljudutgång Koaxial / Optisk Väljer utmatningsläget COAXIAL uttag/OPTICAL
terminal från Bitstream/PCM/Reencode/Av.
34
HDMI Väljer utmatningsläget HDMI terminal från Bitstream/PCM/
Reencode/Av.
34
Downsampling Väljer den digitala ljudsignalen ner för samplingsfrekvensen
från 48K/96K/192K.
34
DRC Ställer in DRC (Dynamic Range Compression). 34
SACD utgång SACD Prioritet Väljer uppspelningsprioritet för 2-kanalsinnehåll eller
flerkanalsinnehåll, när skivan innehåller båda typerna av
innehåll.
34
SACD/CD lager Väljer skiktet som ska spelas upp när en SA-CD/CD hybrid
skiva spelas upp.
34
Högtalarinställning
Nedmixning till
2-kanals
Ställer in ljudutmatningen frånAUDIO OUT L/R utgången.
34
Post Process Uppmixningsfunktion Skapar flera kanaler utifrån den 2-kanaliga ljudsignalen. 34
System
Information
Visar programvaruversion och MAC-adress (s. 42).
34
Meny/undermeny Objekt Funktion Sidan
29 Sv
SETUP meny
Inställningar
4
Svenska
Exempel på SETUP meny
operation
Du måste ringa upp SETUP menyskärmen för att utföra
inställningar för denna spelare. Följande är förklaringen
till de grundläggande funktionerna av SETUP meny.
Exempel: Inställning av skivans automatiska
uppspelning
Vissa objekt kan inte ställas in under uppspelning. I
detta fall trycker på för att stoppa uppspelningen
innan du utför inställningen.
1. Visa SETUP menyskärmen.
Tryck på SETUP för att visa SETUP menyskärmen.
Tryck på 2/3 för att välja Allmäna Inställningar,
tryck sedan på ENTER eller a.
2. Välj en undermeny.
Tryck på 5/a för att välja Spela upp, tryck sedan
ENTER eller markören 3.
3. Välj en menypost.
Tryck på 5/a för att välja Automatisk
skivuppspelning, tryck sedan ENTER eller
markören 3.
4. Välj önskad inställning.
Tryck på 5/a för att välja På eller Av och tryck
sedan på ENTER.
Du måste använda sifferknapparna för att mata in
siffror (t.ex. lösenord) för vissa menyalternativ.
5. Avsluta menyskärmen.
Tryck på 2 för att återgå till föregående meny.
Kommentar
REPEAT A/B
AUDIO
SUBTITTLE
ANGLE
SEARCH
MIRACAST
CLEAR
PIP
HOME
2ND
AUDIO
ENTER
TOP MENU
RETURN ON SCREEN
POP-UP MENU
SETUP
STATUSSETUP
Tips
30 Sv
SETUP meny
Allmäna Inställningar
Standardinställningarna är markerade med ”
*
”.
System
Automatisk avstängning
Ställer in energisparfunktionen till på/av.
När den aktiveras växlar spelaren till skärmsläckarläge om
den inte används på 5 minuter. Efter det, kommer denna
spelare att gå in i standby-läge när den inte har använts i
mer än 15 minuter.
*
, Av
HDMI Control
Du kan ställa in spelaren för att ta emot kontroll signal
från en TV/AV-mottagare som är kompatibel med HDMI-
kontrollfunktionen via en HDMI-kabel (s. 11).
På, Av
*
Ladda Default
Du kan återställa alla inställningar för den här spelaren till
standardinställningen med undantag för
säkerhetsinställningen (s. 31). Information om
standardinställningar finns på sidorna 27–34.
Uppgradera
Du kan uppgradera programvaran manuellt från USB
lagring eller Nätverk. Mer information om
programvaruuppgradering finns i
”Programvaruuppgradering” (s. 37).
Meddelande om uppdatering
Du kan välja om du vill visa meddelandet på skärmen när
den här spelaren upptäcker nyare programvara över
Internet.
*
, Av
Meddelande vid 3D uppspelning
Du kan slå på eller stänga av ett varningsmeddelande, med
avseende på 3D-video som visas på TV:n, när spelaren är
påslagen.
*
, Av
Lagringsplats
Du kan kontrollera ledigt utrymme på USB-minnet som är
ansluten till spelaren, eller format (tom) den ”BUDA”
mappen i USB-minnet som är ansluten till spelaren genom
att välja Format.
För att du ska få glädje av BD-Live funktioner
(s. 26), måste du ansluta ett USB-minne (med minst
2 GB ledigt utrymme)till en av USB-kontakterna
(fram/bak) av denna spelare för att använda USB-
minnet som lokal lagring.
Snabbinstallation
Du kan utföra Snabbinstallation (s. 18).
Språk
OSD
Du kan välja språk förvisning på skärmen, som är de
meddelanden eller menyn som visas på bildskärmen,
såsomSETUP meny.
English, Français, Español, Deutsch, Italiano, Svenska,
Nederlandse, Polski, Русский, 中文
Användning av HDMI-kontrollfunktion
Med användning av HDMI-kontrollfunktionen kan du
arbeta interaktivt med denna spelare tillsammans med
din TV (HDMI kontrollfunktion stöds).
När du ansluter spelaren till TV: n som är kompatibel
med HDMI-kontrollfunktion genom att använda en
HDMI-kabel och ställa in HDMI Control i SETUP
menyn till på (s. 30), du kan utföra funktionen som
anges nedan.
Funktion för automatiskt ingångsval
När uppspelning påbörjas på spelaren, så växlar TV:ns
ingångsväljare (och en AV-mottagare om spelaren är
ansluten till TV:n via AV-mottagaren) automatiskt om
till spelaren. Beroende på TV:n så kan det vara möjligt
att slå på TV:n automatiskt.
Funktion för automatiskt avslagning
När du stänger av TV: n medan spelaren är i stoppläge
och SETUP menyskärmen inte visas, stängs också
strömmen automatiskt av i denna spelare.
HDMI kontrollfunktion kanske inte fungerar
korrekt beroende på TV:n.
Andra funktioner än de ovannämnda kan fungera,
beroende på TV:n och AV-mottagaren.
För att göra HDMI-kontrollfunktionen tillgänglig,
upprätta inställningarna för HDMI-
kontrollfunktionen på alla komponenter (denna
spelare, TV, och AV-mottagare). Det kan även
behövas vissa manöver.
Varje funktion kan ställas in självständigt för att
aktiveras/avaktiveras beroende på TV:n.
Se bruksanvisningen som medföljer din TV och/
eller AV-mottagare för detaljer kring inställning.
När aktiverad, ökar strömförbrukningen i
vänteläge på grund av HDMI-kontrollfunktionen.
Kommentarer
Tips
31 Sv
SETUP meny
Inställningar
4
Svenska
Meny
Du kan prioritera språket för skivmenyn.
English, Français, 中文 , Español, Deutsch, Italiano,
Nederlandse, Portugisiska, Danska, Svenska, Finska,
Norska, Polski, Русский, Koreanska, Japanska, Mer
Ljud
Du kan prioritera ljudspråket för Blu-ray-skiva/DVD
uppspelning. Mer information om inställningar av poster,
se ”Meny” (s. 31).
Textning
Du kan prioritera språk för undertitel.
English, Français, 中文 , Español, Deutsch, Italiano,
Nederlandse, Portugisiska, Danska, Svenska, Finska,
Norska, Polski, Русский, Koreanska, Japanska, Mer, Av
(Standardinställningarna i [Språk] variera beroende på
modell.)
Spela upp
Automatisk skivuppspelning
Du kan ställa in Automatisk skivuppspelning till på/av.
När denna funktion är aktiverad spelas en skiva upp
automatiskt när den sätts i.
*
, Av
Kameravinkel
Du kan ställa in för att visa Kameravinkel ( ) när Blu-
ray skivan/DVD med flera vinklar spelas upp.
*
, Av
Bild i Bild
Du kan ställa in för att visa Bild i Bild ( ) när Blu-ray-
skivan med bild i bilden (s. 26) spelas upp.
*
, Av
Secondary Audio
Du kan ställa in för att visa Secondary Audio ( ) när
Blu-ray-skiva med sekundärt ljud spelas upp.
*
, Av
Last Memory
Du kan ange om spelaren memorerar den sista platsen som
skivan spelar upp (Blu-ray eller DVD-video) när den är
inställd på vänteläge eller att skivfacket öppnas.
*
, Av
Vissa skivor är inte kompatibla med denna funktion.
DivX (R) VOD DRM
Du kan visa registreringskoden för DivX (R) video.
DivX® Subtitle
Du kan välja om du vill visa en undertext för DivX(R)
video.
På, Av
*
Säkerhet
Ändra lösenord
Du kan ange ett lösenord för att ändra nivån på
föräldrarkontrollen och landskod. Se ”Föräldrakontroll”
(s. 31) och ”Landskod” (s. 31).
Standardlösenordet är 0000.
Om du glömmer lösenordet, se ”Felsökning” (s. 38)
och ställ in alla Säkerhet inställningar till
standardinställningarna.
Föräldrakontroll
I vissa Blu-Ray-skivor/ DVD-skivor, ställs en kontrollnivå
för skivvisning in beroende på tittarens ålder. Du kan
ställa in Föräldrakontroll som visas på skärmen beroende
på skivans innehåll.
Lösenordet (se ”Ändra lösenord” på s. 31) måste anges
innan nivån på föräldrakontrollen är inställd.
När du ställt in Föräldrakontroll, när du spelar upp en
skiva med en nivå högre än nuvarande nivån på
föräldrakontrollen, eller om du vill ändra nivån på
föräldrarkontrollen, kommer en dialogruta dyka upp för
att be dig ange lösenordet.
Av*, 1–8
Landskod
Du kan ställa in landskoden där du bor. Lösenordet (se
”Ändra lösenord” på s. 31) måste anges innan landskoden
ställs in. Denna inställning kan användas för att
klassificera föräldrakontrollen och uppspelning av skivan.
Nätverk
Välj typ av anslutning
Du kan välja en nätverksanslutningsmetod.
Information
Du kan visa en skärm med nätverksinformation. På den
här skärmen kan du visa information om gränssnitt
(Ethernet), Adresstyp, IP adress, Subnet Mask,
Standardgateway, och DNS.
Kommentar
Kommentarer
Kabelanslutning*
Ansluter nätverket med Ethernet.
Trådlös Ansluter nätverket med ett trådlöst nätverk.
Du kan välja inställningar för trådlös
nätverksanslutning. Följ instruktionerna på skärmen.
Sök trådlöst nätverk
Söker efter en åtkomstpunkt. Du kan ansluta till den
åtkomstpunkt som hittas.
Manual
Du kan ange information manuellt för en
åtkomstpunkt.
Auto
Om din åtkomstpunkt stödjer WPS (Wi-Fi skyddad
inställning) funktionen, kan du använda metoden
automatisk inställning för att ansluta spelaren till
åtkomstpunkten utan att ange informationen
manuellt. Välj PBC (Tryckknapp för konfiguration)
eller PIN kod metoden.
32 Sv
SETUP meny
Anslutningstest
Du kan utföra ett Internet-anslutningstest. Om testet
misslyckades, kontrollera ”IP inställningar” (s. 32) och
utför testet igen.
IP inställningar
Du kan konfigurera nätverksinställningarna.
Numeric keys Anges i tecken.
2/3 Flyttar markeringen.
CLEAR Raderar ett tecken.
ENTER Sparar inställningar och utgår från
menyn.
Proxyinställning
Du kan ställa in Proxyinställning. Ställ in på Inaktivera för
normal användning. Ställ in på Möjliggöra för att ställa in
Proxyinställning.
Nätverkskontroll
Ställer in kontrollen för enheter som är anslutna via
Ethernet, till På/Av. När Slåfilter är vald, kan du ange
MAC adresserna till nätverksenheter som tillåter åtkomst
till den här spelaren. Den här spelaren använder Yamaha
Network Control protocol (YNC).
*
, Slå på filter, Av
När Nätverkskontroll är möjligt, ökar
strömförbrukningen i vänteläge på grund nätverkets
styrfunktion.
När du väljer På, minskar tiden för systemstart.
Network Standby
Du kan välja om denna spelare kan slås på från andra
nätverksenheter såsom ”AV CONTROLLER” (s. 22).
På, Av
*
Denna inställning är endast tillgänglig när
Nätverkskontroll är aktiverad.
DMC kontroll
Du kan välja om du vill tillåta DLNA-kompatibla styrning
av digitala medier (DMC) (s. 15) för att styra denna
spelare.
Möjliggöra
*
, Inaktivera
BD-Live anslutning
Du kan ställa in begränsad åtkomst till BD-Live-innehåll.
Display inställningar
Standardinställningarna är markerade med ”
*
”.
TV
3D uppspelning
Du kan välja videoutmatning i 3D eller 2D från denna
spelare.
Även om du ställer in ”3D uppspelning” till ”Auto”
och spelar upp en Blu-ray-skiva i 3D väljer denna
spelare 2D-bilder beroende på inställningen av TV-
apparaten, etc.
TV Screen
Du kan ställa in skärmformatet för den anslutna TV:n och
justera videoutmatningen.
Om du byter TV (t.ex. du har köpt en ny) och skärmens
bildförhållande för den anslutna TV-apparaten förändras,
måste du ändra TV Screen inställningen.
Auto* Välj att automatiskt konfigurera denna spelares
nätverksinställningar med DHCP-servern.
Manual Välj för att konfigurera nätverksinställningarna (IP
adress, Subnet Mask, Standardgateway, och DNS)
manuellt.
Tips
Inaktivera
*
Avaktiverar proxy-servern. Välj detta objekt när
ingen proxy-server används.
Möjliggöra Aktiverar proxy-värd och proxy-portinställning.
Proxy Host Ställer in proxy-värd.
Proxy Port Ställer in proxy-port.
Kommentarer
Kommentar
Tillåten Tillåter alla BD-Live skivor att ansluta till nätverket.
Delvis
Tillåten
*
Endast skivor med ägarintyg tillåts.
Förbjuden Förbjuder alla BD-Live skivor att ansluta till
nätverket.
Auto* Denna spelare väljer automatiskt 3D- eller 2D-video.
Av Denna spelare väljer alltid 2D-video.
Kommentar
16:9 Full Välj detta när spelaren är ansluten till en TV med
skärmformatet 16:9. När en video med
skärmformatet 4:3 spelas upp, visas videon enligt
bilden nedan.
16:9 Normal
*
Välj detta när spelaren är ansluten till en TV med
skärmformatet 16:9. När en video med
skärmformatet 4:3 spelas upp, visas videon enligt
bilden nedan.
4:3 Pan Scan Välj detta när spelaren är ansluten till en TV med
skärmformatet 4:3. När en video med skärmformatet
16:9 spelas upp, visas videon enligt bilden nedan.
4:3 Letter Boxlj detta när spelaren är ansluten till en TV med
skärmformatet 4:3. När en video med skärmformatet
16:9 spelas upp, visas videon enligt bilden nedan.
Ursprunglig
bildstorlek
På 16:9 (bredskärm) TV
16:9 Full 16:9 Normal
4:3
Ursprunglig
bildstorlek
På 4:3 TV
4:3 Pan Scan 4:3 Letter Box
16:9
33 Sv
SETUP meny
Inställningar
4
Svenska
HDMI Upplösning
Du kan välja HDMI-videoupplösning. För mer
information om utmatningsformat, se ”Om
utmatningsformat för HDMI-video” (s. 36).
När du ställer in Auto, ställs upplösningen på högsta
upplösning enligt den anslutna TV:n.
Om du väljer Läser skiva, används den ursprungliga
upplösningen och videofrekvensen, som spelats in på Blu-
ray-skiva eller DVD som spelas upp. Du kan använda en
videouppskalare på en annan enhet.
När något annat än en Blu-ray-skiva eller DVD spelas
upp, kommer upplösningen och videofrekvens arbeta som
Auto.
Om en Blu-ray-skiva eller DVD-skiva vars upplösning
och video frekvens inte är kompatibla med den anslutna
TV:n, kommer ingen bild matas ut. I det här fallet avslutar
du uppspelningen och väljer ett annat alternativ än Läser
skiva.
Auto
*
, Läser skiva, 480i/576i, 480p/576p, 720p, 1080i, 1080p
För att mata ut HD-ljud (Dolby TrueHD eller DTS-
HD Master Audio) från HDMI-terminalen, ställ in
HDMI Upplösning till Auto eller mer än 720p.
TVsystem
Du kan välja TVsystem från PAL, NTSC och Multi. Ställ
in samma TVsystem som din TV-apparat har. Mer
information om utmatningsformat finns i ”Om formaten
för HDMI videoutmatning” (s. 36).
Färgrymd
Du kan välja utmatning av färgutrymmet (s. 41) från
HDMI. Denna funktion är tillgänglig när spelaren är
ansluten med en HDMI-kabel.
Denna funktion är endast tillgänglig på TV-apparater
som stöder funktionen.
HDMI Deep Color
När din TV och/eller AV-mottagare är kompatibel med
Deep Color (s. 41), ställ in detta alternativ enligt dina TV/
AV mottagare. Denna funktion är tillgänglig när spelaren
är ansluten med en HDMI-kabel.
30 bits, 36 bits, 48 bits, Av
*
HDMI 1080p 24Hz
Detta matar ut BD-Video som kodats med 24 Hz
bildfrekvens i HDMI 1080p 24Hz. Denna funktion kan ge
jämnare videouppspelning. Denna funktion är tillgänglig
när din TV/AV-mottagare stöder denna funktion. Mer
information om utmatningsformat finns i ”Om formaten
för HDMI videoutmatning” (s. 36).
Auto
*
, Av
Denna inställning avaktiveras när
utmatningsupplösningen är inställt på något annat än
1080p.
Video Process
Brusreducering
Du kan ställa in Brusreducering på en nivå av 0 till 3. 0 är
av och 3 är den maximala nivån.
0, 1, 2
*
, 3
De-interlacing läge
Du kan välja hur du vill känna av videosignalen. Ställ in
på Auto för normal användning. När horisontell avskalat
brus visas på skärmen, ange detta på Film/Video för att ta
bort brus.
Auto
*
, Film, Video
Textning
CC Egenskaper
Du kan ställa in utseendet med parentestextning. När Auto
är vald, kommer digital parentestextning visas i
standardinställningarna. När Anpassning är vald, kan du
anpassa utseendet med parentestextning (Font färg, Font
storlek, etc.) manuellt.
Auto, Anpassning
Font färg, Font storlek, Font stil,
Font opacitet, Font skärpa, Tecken med
kantfärg, Bakgrundsfärg,
Bakgrundsopacitet, Färg på fönstret,
Fönstrets opacitet
Anpassa teckensnitt, bakgrund och fönster som används
för parentestextning när CC Egenskaper är inställd på
Anpassning.
Kommentar
NTSC, PAL, Multi
(Standardinställningen skiljer sig beroende på din modell.)
YCbCr 4:4:4
*
Ställer in färgutrymmet på YCbCr 4:4:4.
YCbCr 4:2:2 Ställer in färgutrymmet på YCbCr 4:2:2.
Full RGB När RGB är inställt och vita och svarta nyanser på
skärmen är för bleka, väljer du det här alternativen.
Den här inställningen är effektiv när en ansluten
komponent hanterar RGB 0-255-intervallet.
RGB Matar ut videosignalen i det normala
signalintervallet.
Kommentar
Kommentar
34 Sv
SETUP meny
Ljudinställning
Standardinställningarna är markerade med ”
*
”.
Ljudutgång
Koaxial / Optisk
Du kan välja utmatningsläge för COAXIAL utgången och
OPTICAL uttaget. Mer information om utmatningsformat
finns i ”Angående format för ljudutmatning” (s. 35).
HDMI
Du kan välja utmatningsläge för HDMI. Mer information
om inställningar av poster, se ”Koaxial / Optisk” (s. 34). Mer
information om utmatningsformat finns i ”Angående format
för ljudutmatning” (s. 35).
Bitstream
*
, PCM, Reencode, Av
För att mata ut HD-ljud (Dolby TrueHD eller DTS-
HD Master Audio) från HDMI-terminalen, ställ in
HDMI-upplösning till automatisk eller mer än 720p
(s. 33).
Downsampling
Du kan ställa in nedsamplingsfrekvensen för digitala
ljudsignaler. Den här funktionen är effektiv för
ljudsignalsutmatning från COAXIAL utgången/
OPTICAL -uttaget.
DRC
Du kan ställa in DRC (Dynamic Range Compression)
(s. 41) till på/av/Auto. Om du ställer in Auto, slås DRC
automatiskt på för en källa med DRC information i Dolby
TrueHD format. DRC producerar starka ljud såsom
explosioner, svagare och konversationer mer hörbara.
Detta är användbart när du ser på filmer på natten.
Av, På, Auto
*
SACD utgång
SACD Prioritet
Väljer uppspelningsprioritet för 2-kanalsinnehåll eller
flerkanalsinnehåll, när skivan innehåller båda typerna av
innehåll.
Multi-ch
*
, 2-ch
SACD/CD lager
Väljer skiktet som ska spelas upp när en SA-CD/CD
hybrid skiva spelas upp.
SACD
*
, CD
SA-CD-indikatorn på frontpanelen tänds när en SA-
CD är laddad och SA-CD-lagret har markerats.
Den här inställningen är bara tillgänglig när ingen
skiva är isatt.
Ljudsignaler skickas inte ut från COAXIAL eller
OPTICAL utgången (s. 13) när SA-CD-lagret har
valts.
Högtalarinställning
Nedmixning till 2-kanals
Du kan välja nedmixningsmetod till 2 analoga kanaler
Stereo eller Lt/Rt.
Post Process
Uppmixningsfunktion
Du kan skapa flera kanaler utifrån den 2-kanaliga
ljudsignalen. Om du vill skapa flera kanaler väljer du DTS
NEO:6, och välj sedan Cinema eller Musik läge.
Av
*
, DTS NEO:6
System Information
Programvaruversion och MAC-adress (s. 42) visas.
Bitstream Matar ut en digital signal utan bearbetning.
Sekundärt ljud matas inte ut.
PCM Skickar ut 2-kanals PCM.
Reencode
*
Matar ut bitström med sekundärt ljud.
Av Stänger av ljudet.
Kommentar
48K
*
Den högsta samplingshastigheten för digital PCM-
utmatning är 48 kHz.
96K Den högsta samplingshastigheten för digital PCM-
utmatning är 96 kHz.
192K Den högsta samplingshastigheten för digital PCM-
utmatning är 192 kHz.
Tips
Kommentarer
Stereo
*
Ändrar kanalutmatning till stereo, vilket bara ger
ljud från de två fronthögtalarna.
Lt/Rt Välj det här alternativet om enheten är ansluten till
en Dolby Pro Logic avkodare Ljudet från de bakre
högtalarna mixas till 2-kanaligt stereoljud.
35 Sv
SETUP meny
Inställningar
4
Svenska
Angående format för ljudutmatning
*1 ”SA” är ett sekundärt ljud. ”BCS” är ett knappklickljud, ljudeffekt för popup-menyer m.m.
*2 För USB, DLNA och nätverkstjänster, PCM och blandade 2kanaler är inte tillgängliga (avstängd).
*3 För USB, DLNA och nätverkstjänster, Reencode är inte tillgänglig (utmatningsljudet kommer att vara samma format
som bitström).
När Koaxial / Optisk eller HDMI ställs in på Bitstream, matas sekundärt ljud inte ut. (s. 34)
För att mata ut HD-ljud (Dolby TrueHD eller DTS-HD Master Audio) från HDMI-terminalen, ställ in HDMI
Upplösning till Auto eller mer än 720p (s. 33).
SA-CD utmatningsformat
Källformat
HDMI COAXIAL / OPTICAL MIXED 2CH
Bitstream PCM Reencode Bitstream PCM Reencode
PCM
2kanaler
med SA eller
BCS
*1
PCM 2kanaler Dolby Digital PCM 2kanaler Dolby Digital 2-kanals
utan SA eller
BCS
*1
PCM 2kanaler PCM 2kanaler 2-kanals
PCM 5.1kanal
med SA eller
BCS
*1
PCM 5.1kanal Dolby Digital PCM 2kanaler Dolby Digital 2-kanals
utan SA eller
BCS
*1
PCM 5.1kanal PCM 2kanaler 2-kanals
PCM 7.1kanal
med SA eller
BCS
*1
PCM 7.1kanal Dolby Digital PCM 2kanaler Dolby Digital 2-kanals
utan SA eller
BCS
*1
PCM 7.1kanal PCM 2kanaler 2-kanals
Dolby Digital
med SA eller
BCS
*1
Dolby Digital
PCM upp till
5.1kanal
Dolby Digital Dolby Digital
PCM
2kanaler
Dolby Digital 2-kanals
utan SA
eller
BCS
*1
Dolby Digital
Plus
med SA eller
BCS
*1
Dolby Digital
Plus
PCM upp till
7.1kanal
Dolby Digital
Dolby Digital
PCM
2kanaler
Dolby Digital 2-kanals
utan SA
eller
BCS
*1
Dolby Digital
Plus
Dolby
TrueHD
med SA eller
BCS
*1
Dolby
TrueHD
PCM upp till
7.1kanal
Dolby Digital
Dolby Digital
PCM
2kanaler
Dolby Digital 2-kanals
utan SA
eller
BCS
*1
Dolby
TrueHD
DTS
med SA eller
BCS
*1
DTS
PCM upp till
5.1ch
*2
DTS
*3
DTS
PCM
2kanaler
*2
DTS
*3
2kanaler
*2
utan SA
eller
BCS
*1
DTS HD High
Resolution
med SA eller
BCS
*1
DTS-HD
Högupplöst
PCM upp till
7.1kanal
*2
DTS
*3
DTS
PCM
2kanaler
*2
DTS
*3
2kanaler
*2
utan SA
eller
BCS
*1
DTS HD
Högupplöst
*3
DTS-HD
Master Audio
med SA eller
BCS
*1
DTS-HD
Master Audio
PCM upp till
7.1kanal
*2
DTS
*3
DTS
PCM
2kanaler
*2
DTS
*3
2kanaler
*2
utan SA
eller
BCS
*1
DTS-HD
Master
Audio
*3
Kommentarer
SACD Prioritet inställning
(s. 34)
HDMI COAXIAL / OPTICAL
MIXED 2CH
Multi-ch PCM upp till 5.1kanal Ingen utsignal 2-kanals
2-ch PCM upp till 2kanaler Ingen utsignal 2-kanals
36 Sv
SETUP meny
Om formaten för HDMI videoutmatning
När TVsystem är inställd på NTSC
När TVsystem är inställd på PAL
*1 Upplösningen ställs in på den högsta upplösningen som stöds av den anslutna TV:n. Ett exempel: när den maximala
upplösningen som stöds av den anslutna TV:n är 1080p, ställs upplösningen in på 1080p.
*2 Källskivans upplösning och frekvens kommer att användas.
*3 Om Auto är inställd för HDMI 1080p 24Hz och den anslutna TV: n stöder 1080p 24Hz innehåll, 1080p 24 Hz sänds i
stället för 1080p 50/60 Hz.
När TVsystem är inställd på Multi
När TVsystem är inställd på Multi, matas videosignalen ut med samma frekvens som källan. Se tabellerna ovan för mer
information om TV:ns frekvensinställning och videoutsignalens upplösning.
HDMI 1080p 24Hz inställning avaktiveras när upplösningen är annat än 1080p.
När TVsystem är inställd på NTSC och videokällan är inte 60 Hz, konverteras videons utmatningssignal till 60
Hz.
När TVsystem är inställd på PAL och videokällan inte är 50 Hz, konverteras videons utmatningssignal till 50 Hz.
Innehåll
HDMI Upplösning
Auto Läser skiva 1080p 1080i 720p 480p/576p 480i/576i
BD-Video med
1080p/24Hz innehåll
*
1
1080p 24Hz
1080p 24Hz/
60Hz
*3
1080i 60Hz 720p 60Hz 480p 480i
BD-Video utan 1080p/
24Hz innehåll
*
1
*
2
1080p 60Hz 1080i 60Hz 720p 60Hz 480p 480i
DVD-Video
*
1
*
2
1080p 60Hz 1080i 60Hz 720p 60Hz 480p 480i
Övrigt
*
1
*
1
1080p 60Hz 1080i 60Hz 720p 60Hz 480p 480i
Innehåll
HDMI Upplösning
Auto Läser skiva 1080p 1080i 720p 480p/576p 480i/576i
BD-Video med
1080p/24Hz innehåll
*
1
1080p 24Hz
1080p 24Hz/
50Hz
*3
1080i 50Hz 720p 50Hz 576p 576i
BD-Video utan 1080p/
24Hz innehåll
*
1
*
2
1080p 50Hz 1080i 50Hz 720p 50Hz 576p 576i
DVD-Video
*
1
*
2
1080p 50Hz 1080i 50Hz 720p 50Hz 576p 576i
Övrigt
*
1
*
1
1080p 50Hz 1080i 50Hz 720p 50Hz 576p 576i
Kommentarer
37 Sv
Inställningar
4
Svenska
Ny mjukvara som ger ytterligare funktioner och produktförbättringar kommer att släppas efter behov. Vi rekommenderar
att du uppgraderar programvaran för denna spelare till den senaste versionen regelbundet.
Kontrollera om det finns tillgängliga uppgraderingar genom att besöka
http://download.yamaha.com/
Ta inte bort USB-minnet. Ställ in den här spelaren i väntläge eller koppla ur strömkabeln/nätverkskabeln medan
uppgraderingen utförs.
Uppgradera programvaran
1. Förbered programvaru-
uppgradering.
När du uppgraderar programvaran från USB-minnet:
1 Spara uppgraderingsfilen i lämplig mapp på
USB-minnet. Mer information finns i
informationsdokumentet som medföljer
uppgraderingspaketet.
2 Anslut USB-minnet.
När du uppgraderar programvaran från nätverket:
Bekräfta att spelaren är ansluten till nätverket.
2. Välj uppgraderingsmetoden och
börja uppgradera från SETUP
menyn.
1 Tryck SETUP för att visa SETUP menyskärmen.
2 Välj Allmäna Inställningar = System =
Uppgradera.
3 Markera objektet som innehåller
uppgraderingsfilen från USB lagring/Nätverk.
Systemet söker efter uppgraderingspaketet.
3. Uppgradera programvaran genom
att följa meddelandena på
skärmen.
Uppgradering slutförs. Systemet kommer att
återställas.
Programvaruuppgradering
Kommentar
38 Sv
YTTERLIGARE INFORMATION
Vi hänvisar till tabellen nedan när spelaren inte fungerar korrekt. Om du upplever ett problem som inte finns beskrivet
nedan eller om instruktionerna nedan inte hjälper, stäng av spelaren, koppla ur strömkabeln och kontakta närmaste
auktoriserad Yamaha återförsäljare eller serviceverkstad.
Ström
Grundläggande funktioner
Skivuppspelning
Felsökning
Problem Tänkbara orsaker och lösningar
Ingen ström. Anslut nätkabeln ordentligt.
Tryck på p på frontpanelen för att slå på strömmen
Strömmen till spelaren slås av. Den här spelaren kommer att automatiskt stängas av efter 20 minuters inaktivitet (ingen
uppspelning) när automatiskt viloläge (s. 30) är påslaget.
Problem Tänkbara orsaker och lösningar
Fjärrkontrollen fungerar inte. Använd fjärrkontrollen inom angivet styromfång. (s. 10)
Byt batterierna i fjärrkontrollen. (s. 10)
Kontrollera ID-inställningarna för huvudenheten och fjärrkontrollen. Fjärrkontroll-ID
på huvudenheten kan ändras när huvudenheten har återställts. I så fall kontrollerar du
fjärrkontroll-ID på huvudenheten, och ställer in det igen om det behövs. (s. 10)
Knapparna fungerar inte.
Tryck och håll p på frontpanelen i mer än 5 sekunder för att återställa den här spelaren.
r att helt återställa den här spelaren, dra ur nätkabeln från vägguttaget i 30 sekunder
eller mer, anslut nätsladden till vägguttaget igen, och slå sedan på spelaren.
Glömt lösenord.
Tryck och håll , och på frontpanelen samtidigt när ingen skiva är isatt och
uppspelningen är stoppad för att ställa in alla inställningar, inklusive
säkerhetsinställningarna (s. 31) på denna spelare till standardinställningarna. När
strömmen stängs av automatiskt tryck på p för att slå på strömmen igen.
Problem Tänkbara orsaker och lösningar
Spelaren kan inte spela upp en skiva. Ta ur skivan och rengör den. (s. 5)
Se till att sätta i skivan på rätt sätt (mitt i skivfacket och med etikettsidan vänd uppåt).
(s. 5)
Använd en skivtyp som stöds av spelaren. (s. 3)
Ta ut skivan och kontrollera om spelaren stöder skivan eller inte. (s. 3)
Kontrollera regionskoden. (s. 3)
Kontrollera om det är fel på skivan genom att pröva med en annan skiva.
CD-R/RW, DVD+R/RW/R DL, och DVD-R/RW/R DL måste slutföras. (s. 3)
Video stoppas. Spelaren stoppas om den känner av stötar eller vibrationer.
Spelaren avger ett knäppande ljud när
avspelning startas eller vid isättning av
en skiva.
Dessa ljud tyder inte på något fel på spelaren utan är normala driftsbetingelser.
Det tar tid att starta uppspelningen av
Blu-ray-skivan.
Denna spelare söker efter ett USB-minne som används som lokal lagring för BD- Live-
funktionen (s. 26) när en Blu-ray skiva laddas. För att minska väntetiden, ha ett USB-
minne ansluten till en av USB-kontakterna (fram/bak) på denna spelare (s. 16).
39 Sv
Felsökning
Ytterligare information
5
Svenska
Bild
Ljud
Nätverk
Problem Tänkbara orsaker och lösningar
Ingen bild. Kontrollera att alla kablar anslutits på rätt sätt. (s. 11)
Kontrollera att den anslutna TV:n eller AV-mottagaren är inställd på rätt ingångskälla.
Om ingen skiva är isatt eller uppspelningen är stoppad, håller du ned och
frontpanelen samtidigt för att ställa in videoupplösningen på standardvärdet.
Om en bild är fortfarande inte visas, tryck och håll på frontpanelen i ungefär 5
sekunder för att växla NTSC/PAL.
När den är satt till Läser skiva, är en signal som inte är kompatibel med den anslutna
TV: n utgången. Ändra inställningen för att skicka ut en signal som är kompatibel med
den anslutna TV:n. (s. 33)
Se till att skivan eller filen du försöker spela upp är kompatibel med spelaren (s. 3).
Skärmen fryses och
funktionsknapparna fungerar inte.
Tryck på och starta sedan uppspelningen på nytt.
Slå av strömmen och slå sedan på den igen.
Tryck och håll p på frontpanelen i mer än 5 sekunder för att återställa den här spelaren.
Video matas inte ut med önskad
upplösning.
Ställ in på önskad upplösning. (s. 33)
Bredskärmsbilder ter sig utsträckta
vertikalt, eller det uppträder svarta band
överst och underst på skärmen. Eller
4:3-videon visas utsträckt vågrätt.
Ändra TV:ns bildformat. (s. 32)
Fyrkantiga störningar (mosaikmönster)
uppträder på skärmen.
dana störningar kan uppträda i scener med hastiga rörelser beroende av egenskaperna
för digital bildkomprimeringsteknik.
Problem Tänkbara orsaker och lösningar
Inget ljud eller förvrängt ljud. Kontrollera att Ijudkabeln är ansluten på rätt sätt. (s. 11)
Höj ljudet på TV:n eller AV-mottagaren.
Inget ljud hörs vid visning av en stillbild eller snabbspolning framåt/bakåt. (s. 9)
Ljudet matas kanske inte ut beroende på inspelningsstatus, t.ex. om skivan är inspelad
med ljud utöver rena ljudsignaler eller ljud som skiljer sig från normala ljudsignaler.
(s. 3)
Se till att skivan eller filen du försöker spela upp är kompatibel med spelaren (s. 3).
Vänster och höger ljudkanal är
omkastade, eller ljudet matas bara ut
från ena sidan.
Kontrollera ljudanslutningen. (s. 13)
Kan inte höra den önskade ljudtypen
och/eller antal kanaler.
Se inställningen för ljudutgång och ”Angående format för ljudutmatning”. (s. 34, s. 35)
Inget ljud hörs med PIP (bild-i-bild)
(sekundärt ljud).
Ställ in Koaxial / Optisk eller HDMI till PCM/Reencode. (s. 34)
För att höra sekundärt ljud, tryck på 2ND AUDIO. (s. 8)
Beroende på skivan kanske du måste ställa in sekundärt ljud i skivans översta meny.
(s. 9)
Problem Tänkbara orsaker och lösningar
Spelaren ansluter inte till Internet. När du ansluter till Internet genom att välja Kabelanslutning i Välj typ av anslutning,
anslut nätverkskabeln ordentligt. (s. 31)
Aktivera ansluten utrustning, som bredbandsrouter eller modem.
Anslut bredbandsroutern och/eller modemet ordentligt.
Om Trådlös är vald i Välj typ av anslutning, och när du vill ansluta till Internet via
Ethernet, välj Kabelanslutning ordentligt. (s. 31)
Korrekt val av Trådlös i Välj typ av anslutning när du vill ansluta till Internet via ett
trådlöst nätverk. (s. 31)
Kan inte hämta innehållet för BD- Live. Kontrollera att spelaren kan anslutna till Internet. Se ”Anslutningstest”. (s. 32)
Anslut USB-minnet korrekt. Kontrollera att USB- minnet är anslutet till USB-kontakten
på den här spelaren. (s. 16)
Kontrollera om Blu-ray-skivan stöder BD-Live.
Anslut USB-minnesenhet som är formaterad i FAT16, FAT32 eller NTFS.
Det rekommenderas att du ansluter USB-minnet med minst 2 GB ledigt utrymme. Om
det inte finns tillräckligt med ledigt utrymme, formatera USB-minnet. (s. 30)
Se den medföljande bruksanvisningen för skivan eller konsultera skivtillverkaren.
40 Sv
Felsökning
Meddelanden på skärmen
Följande meddelanden visas på TV-skärmen om du försökt spela upp en olämplig skiva eller utfört en felaktig
manöver.
Kan inte upptäcka DLNA-servern. Kontrollera att spelaren kan anslutna till nätverket. Se ”Anslutningstest”. (s. 32)
Aktivera ansluten utrustning, som bredbandsrouter eller server.
Bekräfta spelaren och servern är anslutna till samma router (eller åtkomstpunkt).
Beroende på DLNA-server, kan spelaren behöva medges från servern.
Beroende på DLNA-server, kanske måste du ändra inställningen för brandväggen.
Kan inte spela upp filen på DLNA-
servern.
Kontrollera att filen är spelbar. (s. 3)
Kontrollera DLNA-serverns inställningar.
Kvaliteten och funktionen av uppspelningen kan påverkas av ditt hemmanätverks
tillstånd.
Kan inte ansluta till Internet via trådlöst
LAN.
Kontrollera att den trådlösa LAN-routern är påslagen.
Beroende på den omgivande miljön, såsom väggmaterial, radiovågor
mottagningsförhållanden, eller hinder mellan spelaren och den trådlösa LAN- routern,
kan kommunikationsavståndet förkortas. Flytta spelaren och den trådlösa LAN-routern
närmare varandra.
Enheter som använder ett frekvensband på 2,4 GHz, t.ex. en mikrovågsugn, Bluetooth,
eller digital sladdlös enhet kan störa kommunikationen. Flytta spelaren bort från sådana
enheter eller stäng av dem.
Om Internet anslutningen via det trådlösa nätverket fortfarande inte lyckas ansluta sig
enligt ovanstående lösningar, försök använda Ethernet genom att välja Kabelanslutning
iVälj typ av anslutning. (s. 31)
Det trådlösa nätverket hittas inte eller
störs.
Kontrollera att den trådlösa LAN-routern är påslagen.
Flytta spelaren närmare routern eller ändra riktningen på denna spelare eller antennen
för den trådlösa LAN-routern.
Om den trådlösa anslutningen inte kan konfigureras med hjälp av WPS-funktionen, välj
ett annat alternativ (Sök trådlöst nätverk eller Manual) (s. 18).
Se till att det trådlösa nätverket inte störs av mikrovågsugnar, digitala sladdlösa
telefoner eller andra närbelägna WiFi-enheter.
Mikrovågsugnar, digitala trådlösa telefoner eller andra trådlösa enheter i närheten kan
störa det trådlösa nätverket. Stäng av de enheterna.
Se till att brandväggarna i nätverket tillåter åtkomst till spelarens trådlösa anslutning.
Om det trådlösa nätverket inte fungerar på rätt sätt, försök med en kabelanslutning.
Felmeddelande Tänkbara orsaker och lösningar
Saknar stöd för denna fil Filen stöds inte av denna spelare. Se ”Typer av skivor/filer som kan användas med denna spelare
(s. 3).
Fel regionskod! Skivan har en inkompatibel regionskod. Se ”Regional användningsinformation för Blu-ray Skiva/
DVD-video” (s. 3).
Nätverket är FELAKTIGT. Denna spelare kan inte anslutas till nätverket. Kontrollera anslutningen (s. 14) och Nätverk
inställningen (s. 31).
Nätverket är OK, proxy är
FELAKTIG.
Denna spelare kan inte anslutas till proxy-servern. Se ”Proxyinställning” (s. 32).
BD-Live anslutningen är
avaktiverad i SETUP menyn.
BD-Live anslutning är inte tillåtet. Se ”BD-Live anslutning” (s. 32).
Uppgraderingen
misslyckades av någon
anledning!
Uppgradering misslyckades. Kontrollera om uppgraderingsfilen är skadad eller oläsbar.
IP inställningen är felaktig.
Vänligen återställ…
IP-inställning du angav är inte giltig. Ange rätt information igen.
Problem Tänkbara orsaker och lösningar
41 Sv
Ytterligare information
5
Svenska
AVCHD
AVCHD är ett nytt format (standard) för videokameror
med hög upplösning som kan användas för att spela in
och spela upp HD-bilder i hög upplösning.
BD-Live™
BD-Live är en standard Blu-ray-skiva som använder en
nätverksanslutning, som gör att denna spelare kan
ansluta sig online för att ladda ner PR-videor och annan
data.
BDMV
BDMV (Blu-ray-skiva med film) refererar till en av de
tillämpningsformaten som används för BD-ROM, som
är en av specifikationerna för Blu-ray-skivan. BDMV är
ett inspelningsformat likvärdigt med DVD-Video av
DVD specifikation.
Blu-ray 3D™
Med Blu-ray 3D kan du se alla bilder med hög
upplösning i 3D.
BONUSVIEW™
BONUSVIEW kompatibla skivor låter dig samtidigt
njuta av video subkanal på två skärmar, subkanal med
ljud och textremsor. En liten skärm visas inom den
större skärmen under uppspelning (bild-i bild).
Textning
Skillnaden mellan undertexter och parentesundertexter
är att undertexter är avsedda för personer som kan höra
och parentesundertexter är avsedda för hörselskadade.
Undertexter visar sällan alla ord i ljudspåret.
Till exempel visar parentesundertexter ljudeffekter (t.ex.
”telefon ringer” och ”fotsteg”), medan undertexter inte
visar detta. Innan du väljer denna inställning ska du
kontrollera att skivan innehåller information för
parentesundertexter.
Färgutrymme (Color Space)
Color Space är en färgskala som kan representeras.
RGB är ett färgutrymme baserat på färgmodellen RGB
(röd, grön och blå) och används normalt för PC-
skärmar. YCbCr är ett färgschema som är baserat på en
luminanssignal (Y) och två färgskillnadssignaler (Cb
och Cr).
Deep Color
Deep Color hänvisar till användningen av olika färgdjup
vid visning, ett steg upp från 24-bitars färgdjup som
förekommer i tidigare versioner med HDMI-
specifikation. Detta extra bitdjup gör det möjligt för
HDTV och andra displayer att gå från miljoner färger
till miljarder färger och eliminera färgband på skärmen
för att ge jämna färgtonsövergångar och subtila
graderingar mellan färger. Det ökade
kontrastförhållandet kan representera många gånger fler
grå färgtoner mellan svart och vitt. Deep Color ökar
även antalet tillgängliga färger inom gränserna som
definieras av färgutrymmet RGB eller YCbCr.
DLNA
DLNA (Digital Living Network Alliance) ger enkel
distribution av digital media via nätverket i hemmet, och
du kan njuta av digitalt innehåll lagrat på din DLNA-
server programvara installerad i datorn eller annan
DLNA-kompatibel enhet med din TV via denna spelare.
För att ansluta spelaren till DLNA-servrar, krävs vissa
inställningar för DLNA-server eller enheten. För mer
information, se programvaran för din DLNA server eller
DLNA-enhet.
DivX®
DivX® är ett digitalt videoformat skapat av DivX, LLC,
ett dotterbolag till Rovi Corporation. Detta är en
officiell DivX Certified ®-enhet som spelar upp DivX-
video. Besök divx.com för mer information och
programverktygen för att konvertera dina filer till DivX-
video.
Dolby Digital
Ett ljudsystem utvecklat av Dolby Laboratories Inc. och
som ger en biosalongs ljudutmatning när produkten är
ansluten till en Dolby Digital- processor eller
förstärkare.
Dolby Digital Plus
Ett ljudsystem utvecklat som en förlängning till Dolby
Digital. Denna ljudkodningsteknik stöder flerkanals 7.1-
surroundljud.
Dolby TrueHD
Dolby TrueHD är en förlustfri kodningsteknik som
stöder upp till 8 kanaler av flerkanaligt surroundljud för
nästa generations optiska skivor. Ljudet återger den
ursprungliga ljudkällan helt naturtroget.
DRC (Dynamiskt omfång kontroll)
DRC kan du justera omfånget mellan de kraftigaste och
mjukaste ljuden (dynamiskt omfång) för uppspelning på
en medelhög volym. Använd detta när det är svårt att
höra dialog eller när uppspelning kan störa grannarna.
DTS
Detta är ett digitalt ljudsystem utvecklat av DTS, Inc.
för användning i biografer.
DTS-HD High Resolution Audio
DTS-HD Högupplöst ljud är en ny teknik utvecklad för
nästa generations högupplösta optiska skivformat.
DTS-HD Master Audio
DTS-HD Master Audio är en förlustfri
ljudkomprimeringsteknik utvecklad för nästa
generations högupplösta optiska skivformat.
Ordlista
42 Sv
Ordlista
FLAC
FLAC (Free Lossless Audio Codec) är ett öppet
filformat för förlustfri ljuddatakompression. Även om
det har sämre komprimeringsgrad jämfört med andra
förlustgivande komprimerade ljudformat, kan det ofta
ge högre ljudkvalitet.
HDMI
HDMI ( High- Definition Multimedia Interface ) är ett
gränssnitt som stödjer både video och ljud via en enda
digital anslutning. HDMI-anslutningen överför standard
till högupplösta videosignaler och flerkanaliga
ljudsignaler till AV-komponenter såsom HDMI-utrustad
TV i digital form utan någon försämring.
Letter Box (LB 4:3)
Ett skärmformat med svarta band överst och underst på
bilden som medger visning av bredskärmsbilder (16:9)
på en TV av formatet 4:3.
Linjärt PCM-ljud
Linjär PCM är ett inspelningsformat med signal som
används för ljud-CD och vissa DVD -och Blu-ray-
skivor. Ljudet på ljud-CD spelas in vid 44,1 kHz med 16
bitars. (Ljudet spelas in mellan 48 kHz med 16 bitars
och 96 kHz med 24 bitars på DVD-skivor och mellan 48
kHz med 16 bitars och 192 kHz med 24 bitars på Blu-
ray-skivor.)
Mac-adress
Mac-adressen är en unik värdetilldelning för en
nätverksenhet som används för identifiering.
Pan Scan (PS 4:3)
Ett skärmformat som skär av sidorna på bilden för att
tillåta visning av bredskärmsbilder (16:9) på en TV av
formatet 4:3.
Undertexter
Dessa är textraderna på undersidan av skärmen som
översätter eller skriver ut dialogen. De är inspelade
många DVD- och Blu-ray-skivor.
x.v.Color
xvColor återger ett större omfång färger än tidigare, och
visar nästan alla färger som det mänskliga ögat kan
uppfatta.
43 Sv
Ytterligare information
5
Svenska
Allmänt
Strömförsörjning
[Modeller för Storbritannien, Europa, Ryssland och Australien]
................................................................................AC 110–240 V, 50 Hz
[Modeller för Asien och Central- och Sydamerika]
...........................................................................AC 110–240 V, 50/60 Hz
[Andra modeller]....................................................AC 110–240 V, 60 Hz
Strömförbrukning ................................................................................. 17 W
Strömförbrukning i vänteläge
HDMI Control Av, Network Standby Av................0,2 W (typiskt värde)
HDMI Control På, Network Standby Av.................0,3 W (typiskt värde)
HDMI Control Av, Network Standby.................5,5 W (typiskt värde)
HDMI Control På, Network Standby På..................5,5 W (typiskt värde)
Måtten (B × H × D,inklusive utsprång) ........................ 435 × 86 × 257 mm
Vikt...................................................................................................... 2,7 kg
Ljudprestanda
Ljudutnivå (1 kHz, 0 dB)
Blu-ray-skiva/DVD/CD-DA .......................................................2 ± 0.3 V
Signal/brusförhållande
Blu-ray-skiva/DVD/CD-DA .......................................................... 115 dB
Dynamikomfång
Blu-ray-skiva/DVD ........................................................................ 105 dB
CD-DA ........................................................................................... 100 dB
Harmonisk distorsion (1 kHz)
Blu-ray-skiva/DVD/CD-DA ..........................................................0,003%
Frekvensomfång
Blu-ray-skiva/DVD ...........................4 Hz till 22 kHz (48 kHz Sampling)
4 Hz till 44 kHz (96 kHz sampling)
CD-DA ............................................................................. 4 Hz till 20 kHz
ln-/Utgångar
HDMI-utgång .................................................................. Typ A-kontakt × 1
480i/576i/480p/576p/720p/1080i/1080p/1080p@24Hz,
Deep Color, x.v. Färgstöd
Digital utgång.......................................................... Optisk × 1, koaxial × 1
Analog ljudutmatning .................................................Blandat 2 kanaler × 1
USB .............................................................................Typ A anslutning × 2
Trådlös LAN....................................................Standard: IEEE 802.11 b/g/n
Frekvensomfång: 2,4 GHz-bandet
Annan utrustning ..........................................................Remote IN/OUT × 1
Ethernet × 1
Rätten till ändring av tekniska data förbehålles.
Upphovsrätt
Audiovisuellt material kan bestå av
upphovsrättsskyddade verk som ej får spelas in utan
upphovsrättsinnehavarens tillstånd. Upplys dig om
gällande lagar i detta avseende.
”Blu-ray Disc™”, ”Blu-ray™”, ”Blu-ray 3D™”,
”BD-Live™”, ”BONUSVIEW™”, och logotyper är
varumärken som tillhör Blu-ray Disc Association.
är ett varumärke för DVD Format/Logotyp
Licensing Corporation.
Tillverkad under licens från Dolby Laboratorierna. Dolby
och dubbel-D symbolen är varumärken som tillhör Dolby
Laboratories.
Tillverkat under licens under amerikanaska patent med
nummer: 5,956,674; 5,974,380; 6,226,616; 6,487,535;
7,212,872; 7,333,929; 7,392,195; 7,272,567 och andra
utfärdade eller ansökta patent i USA och resten av
världen. DTS-HD, symbolen, och DTS-HD och symbolen
tillsammans är registrerade varumärken och DTS-HD
Master Audio är ett varumärke som tillhör DTS, Inc.
Produkten inkluderar mjukvara. © DTS, Inc. Alla
rättigheter reserverade.
”HDMI”, ”HDMI”-logotypen och High-Definition
Multimedia Interface är varumärken eller registrerade
varumärken som tillhör HDMI Licensiering LLC i USA
och andra länder.
x.v.Color™
”XvColor” och ”xvColor”-logotypen är varumärken som
tillhör Sony Corporation.
”AVCHD” och ”AVCHD”-logotypen är varumärken som
tillhör Panasonic Corporation och Sony Corporation.
Specifikationer
Kommentar
Fortsättning på nästa sida. \
44 Sv
Specifikationer
Java är ett registrerat varumärke som tillhör Oracle och/
eller dess dotterbolag.
DLNA ™ och DLNA CERTIFIED ™ är varumärken eller
registrerade varumärken som tillhör Digital Living
Network Alliance. Med ensamrätt. Obehörig användning
är strängt förbjuden.
Wi-Fi CERTIFIED-logotypen är ett certifieringsmärke
som tillhör Wi-Fi Alliance.
Wi-Fi Protected Setup Identifier Mark är en ikon som
tillhör Wi-Fi Alliance.
”Wi-Fi”, ”Wi-Fi Protected Setup”, ”Wi-Fi Direct” och
”Miracast” är varumärken eller registrerade varumärken
som tillhör Wi-Fi Alliance.
Denna produkt är licensierad enligt patentportföljen för
AVC och VC-1 för personligt och icke kommersiellt bruk
där en användare får (i) koda video i enlighet med AVC-
standarden och VC-1- standarden (AVC/VC-1 Video)
och/eller (ii) koda AVC/VC-1 Video kodad av en
användare som medverkat i en personlig och icke
kommersiell aktivitet och/eller erhållits från en
videoleverantör med licens att tillhandahålla AVC/VC-1
Video. Ingen licens ges eller skall anges för något annat
bruk. Ytterligare information kan erhållas från MPEG LA,
LLC. Se http://www.mpegla.com.
Denna produkt är licensierad under MVC patentportfölj
licens för personligt bruk för en konsument eller andra
användningsområden där man inte får ersättning för att (i)
koda video i enlighet med MVC Standard (”MVC Video”)
och / eller (ii ) avkoda MVC-video som kodats av en
konsument i samband med personlig aktivitet och/eller
erhölls från en videohandlare med licens att leverera MVC
Video. Ingen licens ges eller skall anges för något annat
bruk. Ytterligare information kan erhållas från MPEG LA,
LLC. Se http://www.mpegla.com
Windows Media Player är ett registrerat varumärke eller
varumärke som tillhör Microsoft Corporation i USA och/
eller andra länder
Copyright 2004-2012 Verance Corporation. Cinavia ® är
ett Verance Corporation varumärke. Skyddat av US Patent
7.369.677 och sökta världsomspännande patent och
beviljade patent under licens från Verance Corporation.
Med ensamrätt.
DivX ®, DivX Certified ®, DivX Plus ® HD och
tillhörande logotyper är varumärken som tillhör Rovi
Corporation eller dess dotterbolag och används under licens.
DivX Certified ® för att spela DivX ® och DivX Plus ®
HD (H.264/.MKV) video upp till 1080p HD inklusive
premiuminnehåll.
OM DIVX VIDEO: DivX ® är ett digitalt videoformat
som skapats av DivX, LLC, ett dotterbolag till Rovi
Corporation. Detta är en officiell DivX Certified ®-enhet
som har klarat rigorösa tester för att kontrollera att den
spelar upp DivX-video. Besök divx.com för mer
information och programverktygen för att konvertera dina
filer till DivX-video.
OM DIVX VIDEO-ON-DEMAND: Den här DivX
Certified ®-enheten måste registreras för att kunna spela
upp köpta DivX Video-on-Demand (VOD)-filmer. För att
få din registreringskod, leta upp DivX VOD-avsnittet i
enhetens inställningsmeny. Gå till vod.divx.com för mer
information om hur du gör klar din registrering.
45 Sv
Ytterligare information
5
Svenska
YTTERLIGARE INFORMATION
Siffror
2ND AUDIO, fjärrkontroll ....................8
3D uppspelning, SETUP-menyn ..........32
A
A/B, fjärrkontroll ...................................9
Allmäna Inställningar,
SETUP-menyn .................................30
Andra anslutningar ...............................17
Ändra lösenord, SETUP-menyn ..........31
ANGLE, fjärrkontroll ............................9
Anslutningsinställning,
SETUP-menyn .................................31
Anslutningstest, SETUP-menyn ..........32
Användning av SETUP-menyn ...........29
AUDIO, fjärrkontroll .............................9
Automatisk skivuppspelning,
SETUP-menyn .................................31
Automatiskt viloläge, Setup-meny ......30
AV KONTROLLER ............................22
B
BD-Live ...............................................26
BD-Live anslutning, SETUP-menyn ...32
Bild i Bild, SETUP-menyn ..................31
Bild-i-bild-funktionen ..........................26
Bildspel, Skärmmeny ...........................23
Bitrate, Skärmmeny .............................23
Brusreducering, SETUP-menyn ..........33
C
CLEAR, fjärrkontroll .............................8
Codepage, Skärmmeny ........................23
D
De-interlacing läge, SETUP-menyn ....33
Digital Media Controller (DMC) .........15
Display inställningar,
SETUP-menyn .................................32
DivX (R) VOD DRM,
SETUP-menyn .................................31
DLNA ..................................................15
Downsampling, SETUP-menyn ...........34
DRC, SETUP-menyn ...........................34
Dropbox ...............................................21
E
ENTER, fjärrkontroll .............................9
F
Färgknappar, fjärrkontroll ......................8
Färgrymd, SETUP-menyn ...................33
Fjärrkontroll ...........................................8
Föräldrakontroll, SETUP-menyn .........31
H
HDMI 1080p 24Hz, SETUP-menyn ....33
HDMI Control, SETUP-menyn ...........30
HDMI Control-funktionen ...................30
HDMI Deep Color, SETUP-menyn .....33
HDMI, SETUP-menyn ........................34
Högtalarinställning, SETUP-menyn ....34
HOME, fjärrkontroll ..............................8
I
Information, SETUP-menyn ................31
Ins återuppspelning, Skärmmeny .........23
Ins Sök, Skärmmeny ............................23
IP inställningar, SETUP-menyn ...........32
K
Kameravinkel, SETUP-menyn .............31
Kapitel, Skärmmeny .............................23
Koaxial / Optisk, SETUP-menyn .........34
Kontrollknappar, fjärrkontroll ................9
L
Ladda Default, SETUP-menyn ............30
Lagringsplats, SETUP-menyn ..............30
Landskod, SETUP-menyn ....................31
Last Memory, SETUP-menyn ..............31
Ljud, SETUP-menyn ............................31
Ljud, Skärmmeny .................................23
Ljudinställning, SETUP-menyn ...........34
Ljudutgång, SETUP-menyn .................34
Ljudutmatningsformat ..........................35
M
Markörknappar, fjärrkontroll .................9
Meddelande om uppgraderingen ..........30
Meddelande vid 3D uppspelning,
SETUP-menyn .................................30
Meny, SETUP-menyn ..........................31
Miracast ................................................22
Mode/Spelläge, Skärmmeny ................23
N
Nätverk, SETUP-menyn ......................31
Nätverkskontroll, SETUP-menyn ........32
Nedmixning till 2-kanals,
SETUP-menyn .................................34
Nummerknappar, fjärrkontroll ...............8
O
ON SCREEN, fjärrkontroll ....................9
OSD, SETUP-menyn ...........................30
Övergång, Skärmmeny .........................23
P
Parentestextning, SETUP-menyn .........33
PBC (Tryckknapp konfiguration) ........31
Picasa webbalbum ................................21
PIN kod (WPS) ....................................31
PIP, fjärrkontroll ....................................8
POP UP/MENU, fjärrkontroll ................9
Post Process, SETUP-menyn ...............34
PROGRAM, fjärrkontroll ......................8
Programmerad uppspelning .................25
Programvaruuppgradering ....................37
Proxyinställning, SETUP-menyn .........32
R
REPEAT, fjärrkontroll .......................... 8
RETURN, fjärrkontroll .......................... 9
S
SACD Utgång, SETUP-menyn ........... 34
Säkerhet, SETUP-menyn ..................... 31
SEARCH, fjärrkontroll .......................... 9
Second Audio, Skärmmeny ................. 23
Second Video, Skärmmeny ................. 23
Secondary Audio, SETUP-menyn ....... 31
SETUP, fjärrkontroll ............................. 9
SETUP-menyn ..................................... 27
SHUFFLE, fjärrkontroll ........................ 8
Skärmmeny .......................................... 23
Snabbinstallation, SETUP-menyn ....... 30
Sökfunktion ......................................... 25
Spår/Fil, Skärmmeny ........................... 23
Spela upp, SETUP-menyn ................... 31
Språk, SETUP-menyn ......................... 30
STATUS, fjärrkontroll .......................... 9
Statusmeny .......................................... 24
Subtitle Style, Skärmmeny .................. 23
SUBTITLE, fjärrkontroll ....................... 9
System information, SETUP-menyn ... 34
System, SETUP-menyn ....................... 30
T
Textning, SETUP-menyn .................... 31
Textning, Skärmmeny ......................... 23
Tid, Skärmmeny .................................. 23
Titel, Skärmmeny ................................ 23
TOP MENU, fjärrkontroll ..................... 9
TV Screen, SETUP-menyn ................. 32
TV, SETUP-menyn ............................. 32
TVsystem, SETUP-menyn .................. 33
U
Uppgradera, SETUP-menyn ................ 30
Uppgradering av programvara ............. 37
Uppmixningsfunktion,
SETUP-menyn ................................ 34
Uppspelning av dataskiva .................... 19
Uppspelning av USB-innehåll ............. 19
V
Video Process, SETUP-menyn ............ 33
Videoutmatningsformat ....................... 36
Vinkel, Skärmmeny ............................. 23
W
WPS (Wi-Fi skyddad inställning) ....... 31
Y
YouTube .............................................. 21
Z
ZOOM, fjärrkontroll .............................. 8
Index
Attenzione-i It
1 Per assicurarsi le migliori prestazioni dell’unità, leggere
questo manuale per intero. Conservarlo poi in un luogo sicuro
per poterlo riutilizzare al momento del bisogno.
2 Installare l’unità in una posizione ben ventilata, fresco
asciutta e pulita - lontano da luce solare diretta, sorgenti di
calore, vibrazioni, polvere, umidità e/o freddo. Per
un’adeguata entilazione mantenere le seguenti distanze.
Sopra: 10 cm
Retro: 10 cm
Ai lati: 10 cm
3 Installare quest’unità lontano da elettrodomestici, motori o
trasformatori, perché possono causare ronzi.
4 Non esporre quest’unità a variazioni repentine della
temperatura ambiente e non installarle in stanze molto umide
(ad esempio dove è in uso un umidificatore) per evitare che in
essa si formi condensa, che a sua volta può causare
folgorazioni, incendi, guasti e/o ferite.
5 Evitare di installare l’unità in una posizione dove possano su
di essa cadere oggetti o liquidi. Inoltre, non posare su di essa:
Altri componenti, dato che possono causare danni e/o
lo scolorimento della superficie dell’apparecchio.
Candele o altri oggetti che bruciano, dato che possono
causare incendi, danni all’unità e/o ferite a persone.
Contenitori di liquidi, dato che possono cadere e
causare folgorazioni all’utente e guasti a quest’unità.
6 Non coprire quest’unità con giornali, tovaglie, tende o altro
per non impedirne la dispersione del calore. Se la temperatura
al suo interno dovesse salire, può causare incendi, guasti e/o
ferite.
7 Non collegare quest’unità ad una presa di corrente sino a che
tutti i suoi collegamenti sono completi.
8 Non usare l’unità capovolta. Potrebbe surriscaldarsi e
guastarsi.
9 Non agire con forza eccessiva su interruttori, manopole e/o
cavi.
10 Per scollegare un cavo, tirare la spina e mai il cavo stesso.
11 Non pulire mai quest’unità con solventi ed altre sostanze
chimiche. Essi possono danneggiarne le finiture. Usare
semplicemente un panno soffice e pulito.
12 Usare solo corrente elettrica del voltaggio indicato. L’uso di
voltaggi superiori è pericoloso e può causare incendi, guasti
e/o ferite. Yamaha non può venire considerata responsabile di
danni risultanti dall’uso di quest’unità con un voltaggio
superiore a quello prescritto.
13 Per evitare danni dovuti a fulmini, scollegare il cavo di
alimentazione dalla presa durante temporali.
14 Non tentare di modificare o riparare quest’unità. Affidare
qualsiasi riparazione a personale qualificato Yamaha. In
particolare, non aprirla mai per alcun motivo.
15 Se si prevede di non dover fare uso di quest’unità per qualche
tempo, ad esempio per andare in vacanza, scollegarne la spina
di alimentazione dalla presa di corrente.
16 Prima di concludere che l’unità è guasta, non mancate di
leggere la sezione di questo manuale dedicata alla
“Risoluzione dei problemi”.
17 Prima di spostare quest’unità, premere il pulsante p
portandolo nella modalità di attesa e scollegare la spina di
alimentazione di CA dalla presa di corrente.
18 Quando la temperatura ambiente cambia improvvisamente, si
forma condensa. Scollegare il cavo di alimentazione dalla
presa di corrente e lasciare riposare l’apparecchio.
19 Se viene usata a lungo, quest’unità si può surriscaldare.
Spegnerla e lasciarla riposare perché si raffreddi.
20 Installare quest’unità vicino ad una presa di corrente alternata
dove la spina del cavo di alimentazione possa venire
facilmente raggiunta.
21 Le batterie vanno protette da calore eccessivo, ad esempio
luce solare diretta, fiamme, e così via.
SICUREZZA DEL LASER
Quest’unità impiega un laser. Poiché è possibile causare
lesioni agli occhi, solo personale qualificato di assistenza
tecnica deve aprire la copertura o cercare di riparare
questo dispositivo.
PERICOLO
Radiazioni laser visibili emitte quando aperto. Evitare
l’esposizione agli occhi diretta al raggio laser. Quando
quest’unità è collegata ad una presa a muro, non
avvicinare gli occhi all’apertura del cassetto del disco o ad
altre aperture per guardare all’interno.
Attenzione: prima di usare quest’unità.
Non utilizzare questa unità entro un raggio di 22 cm da
persone a cui è stato impiantato un pacemaker cardiaco
o un defibrillatore impiantabile.
Le onde radio possono influire sui dispositivi medicali.
Non utilizzare quest’unità in prossimità di dispositivi
medicali o di strutture sanitarie.
Questa unità non viene scollegata dalla fonte di
alimentazione CA fintanto che essa rimane collegata
alla presa di rete, ciò anche se l’unità viene spenta col
comando p. Questo stato viene chiamato modo di
standby. In questo stato l’unità consuma una quantità
minima di corrente.
Quando si utilizza uno spinotto o un accoppiatore sul
dispositivo scollegato, questo rimarrà pronto al
funzionamento.
AVVERTENZA
PER RIDURRE IL RISCHIO DI INCENDI E
FOLGORAZIONI, NON ESPORRE QUEST’UNITÀ
A PIOGGIA O UMIDITÀ.
1 It
1
2
3
4
5
Italiano
Cosa è possibile fare con questo lettore ......... 2
Ampia varietà di dischi e formati di file supportati........ 2
Funzioni di rete avanzate................................................ 2
Facile impostazione e funzionamento ............................ 2
Dotazione ............................................................ 2
Informazioni su dischi e file .............................. 3
Tipi di dischi/file utilizzabili con questo lettore............. 3
Caricamento di un disco ................................................. 4
Precauzioni per i dischi................................................... 5
Avviso sulla visione di immagini video 3D ................... 5
Tecnologia Cinavia......................................................... 5
Comandi e funzioni ............................................ 6
Pannello anteriore........................................................... 6
Pannello posteriore ......................................................... 7
Telecomando .................................................................. 8
Collegamenti audio/video................................ 11
Collegamento a un TV via ricevitore AV..................... 12
Collegamento diretto a un TV ...................................... 12
Collegamento a un TV e ad apparecchiature audio...... 13
Collegamento di rete........................................ 14
Collegamento wireless.................................................. 14
Collegamento cablato ................................................... 14
Impostazione del server DLNA.................................... 15
Collegamento USB........................................... 16
Altri collegamenti ............................................. 17
Collegamento alle prese audio REMOTE CONTROL
... 17
Collegamento del cavo di alimentazione...................... 17
Impostazioni iniziali ......................................... 18
Impostazione mediante Installazione rapida................. 18
Impostazione connessione wireless.............................. 18
Menu HOME ...................................................... 19
Riproduzione di foto/musica/video .............................. 19
Uso dei servizi di rete ...................................... 21
Informazioni su Dropbox™.......................................... 21
Informazioni su Picasa™ Web Album......................... 21
Informazioni su YouTube™......................................... 21
Visualizzare foto e video dello smartphone
sullo schermo TV (Miracast™)................... 22
Controllo remoto del lettore da dispositivi
mobili (AV CONTROLLER) .......................... 22
Funzionamento di riproduzione avanzata...... 23
Menu a schermo (On Screen) ....................................... 23
Menu di stato ................................................................ 24
Riproduzione programmata ......................................... 25
Uso della ricerca .......................................................... 25
Riproduzione di BONUSVIEW™ e BD-Live™ ......... 25
Uso della funzione Picture in Picture
(riproduzione audio/video secondario) .................... 26
Uso della funzione BD-Live™..................................... 26
Menu SETUP..................................................... 27
Esempio di funzionamento del menu SETUP .............. 29
Impostazione Generale ................................................. 30
Impostazione Display ................................................... 32
Impostazione Audio...................................................... 34
Informazioni di sistema ................................................ 34
Informazioni sui formati di uscita audio....................... 35
Informazioni sui formati di uscita video HDMI........... 36
Aggiornamento del software........................... 37
Aggiornamento del software ........................................ 37
Risoluzione dei problemi ................................. 38
Alimentazione ............................................................... 38
Funzionamento di base.................................................. 38
Riproduzione disco ....................................................... 38
Immagine ...................................................................... 39
Suono ............................................................................ 39
Rete ............................................................................... 39
Messaggi su schermo .................................................... 40
Glossario........................................................... 41
Dati tecnici ........................................................ 43
Dati generali.................................................................. 43
Prestazioni audio ........................................................... 43
Ingresso/uscita............................................................... 43
Copyright ...................................................................... 43
Indice analitico.................................................. 45
(alla fine di questo manuale)
Informazioni su questo manuale
Il presente manuale descrive il funzionamento di
questo lettore mediante l’uso di un telecomando,
tranne nel caso in cui questo non sia disponibile.
Alcune di queste funzioni sono anche disponibili
mediante l’uso dei tasti del pannello anteriore.
Le note contengono importanti informazioni sulle
istruzioni di sicurezza e di funzionamento. I
suggerimenti indicano consigli sul funzionamento.
Questo manuale è stampato prima della produzione.
Design e specifiche sono soggetti a modifica in parte
come risultato di miglioramenti ecc. In caso di
differenze tra il manuale e il prodotto, il prodotto ha
la priorità.
Le icone utilizzate in questo manuale
Le icone sono utilizzate per indicare i tasti e le funzioni
disponibili per un particolare formato. Per dettagli sui
dischi e formati riproducibili, consultare pagina 3.
: BD-Video
: DVD-Video, DVD-VR, DVD+VR
: Audio CD, Super Audio CD
: file video
: file audio
: file di foto
Sommario
1. Introduzione
2. Collegamenti
3. Riproduzione
4. Impostazioni
5. Informazioni aggiuntive
Information about third party software licenses...i
Quando necessario, verrà rilasciato nuovo software
con ulteriori funzioni o miglioramenti al prodotto.
Consigliamo di aggiornare periodicamente il software
del lettore all’ultima versione. Per dettagli
sull’aggiornamento del software, consultare la sezione
“Aggiornamento del software” (p. 37).
BD
DVD
CD
VIDEO
MUSIC
PHOTO
2 It
INTRODUZIONE
Ampia varietà di dischi e formati di file supportati
Blu-ray Disc™, DVD, SA-CD e CD (p. 23)
Blu-ray 3D™ (p. 11), BONUSVIEW™ e BD-Live™ (p. 25)
File video, file musicali e foto su DVD-R/RW, CD-R/RW e dispositivi di memorizzazione USB (p. 19)
Funzioni di rete avanzate
Riproduzione dei contenuti DLNA (PC o NAS) (p. 19)
Riproduzione in streaming di contenuti sui servizi di rete (p. 21)
Controllo remoto del lettore da dispositivi mobili (AV CONTROLLER) via rete (p. 22)
Visualizzare foto e video dello smartphone sullo schermo TV (Miracast™) (p. 22)
Facile impostazione e funzionamento
Impostazione iniziale facile e rapida (p. 18)
Impostazione automatica della connessione wireless con WPS (Impostazione Wi-Fi protetta) (p. 18)
Aggiornamento del software via rete o USB (p. 37)
Riproduzione sequenziale di TV, ricevitore AV e lettore (Controllo HDMI) (p. 30)
Accertarsi che i seguenti accessori siano in dotazione con il prodotto.
Cosa è possibile fare con questo lettore
Dotazione
5#%&
5#%&
Contenuti su USB
Rete wireless
(supporto WPS)
Vari dischi
Contenuti su smartphone
(Miracast)
Streaming di contenuti in
rete
Contenuti su PC/NAS
(DLNA)
Batterie (×2)
(AAA, R03, UM-4)
Telecomando Cavo di alimentazione
3 It
Introduzione
1
Italiano
Tipi di dischi/file utilizzabili con
questo lettore
In questo lettore è possibile riprodurre dischi da 12
cm e da 8 cm. Non utilizzare un adattatore da 8 cm a
12 cm.
Utilizzare dischi che rispettano gli standard di
compatibilità come indicato dalla presenza dei loghi
ufficiali sull’etichetta del disco. La riproduzione dei
dischi non conformi a tali standard non è garantita.
Inoltre non è garantita la qualità dell’immagine o del
suono anche se fosse possibile riprodurre i dischi.
* Questo lettore è compatibile con un dispositivo di
archiviazione USB formattato in FAT 16/32 e NTFS.
*1 Frequenza di campionamento entro 32-48 kHz (stereo)
e bitrate entro 8-320 kbps
*2 Frequenza di campionamento entro 32-48 kHz (stereo)
e bitrate entro 32-192 kbps
*3 Frequenza di campionamento fino a 192 kHz/24 bit
(LPCM/stereo)
*4 WMV9 (risoluzione massima: 1920 x 1080)
A seconda dei codec o dei metodi utilizzati per la
creazione di un file, non è garantita la riproduzione
di tale file anche se è elencato nella tabella riportata
sopra.
Non è garantita la riproduzione di tutti i file presenti
su disco, dispositivo di archiviazione USB e rete.
Non è possibile riprodurre un file protetto da
copyright.
Quando si utilizza DLNA, è necessario che il file
rispetti i requisiti del server DLNA.
Informazioni sulla gestione della
regione per video Blu-ray Disc/DVD.
I lettori video e i dischi Blu-ray/DVD sono muniti di
codici regionali che impongono le regioni in cui un
disco può essere riprodotto. Verificare il codice
regionale sul pannello posteriore del lettore.
Per un Blu-ray Disc, il disco può essere riprodotto su
questo lettore con lo stesso codice regionale o con il
codice regionale “ABC”.
Per un disco DVD, il disco può essere riprodotto su
questo lettore con lo stesso codice regionale o con il
codice regionale “ALL”.
Informazioni su dischi e file
Tipo di
supporto
Formato di registrazione
BD-ROM/BD-R/
BD-RE
BD-Video/file di dati
DVD-ROM DVD-Video
DVD-R/DVD-R
DL/DVD-RW
DVD-Video/DVD-VR/AVCHD/file di dati
DVD+R/DVD+R
DL/DVD+RW
DVD-Video/DVD+VR/AVCHD/file di dati
CD-ROM CDDA/HDCD
CD-R/CD-RW CDDA/file di dati
SA-CD SA-CD
USB* File di dati
DLNA File di dati
Formati di file
audio
riproducibili
Formati di file
video
riproducibili
Formati di file di
foto riproducibili
MP3 (.mp3)
*1
WMA (.wma)
*2
AAC (.aac/.m4a)
WAV (.wav)
*3
FLAC (.flac)
*3
ALAC (.m4a)
*3
DivX (.divx)
MKV con formato
DivX (.mkv)
MKV con H.264
(.mkv)
MPEG PS (.mpeg/
.mpg)
MPEG TS (.ts)
MPEG-4 (.mp4)
VOB (.vob)
AVI (.avi)
ASF (.asf)
WMV (.wmv)
*4
JPEG (.jpeg/.jpg)
GIF (.gif)
PNG (.png)
MUSIC
PHOTO
Note
Informazioni sulla gestione della regione
Destinazione BD video DVD-Video
Stati Uniti e Canada Codice regionale
“A” o “ABC”
Codice regionale “1
o “ALL”
Europa Codice regionale
“B” o “ABC”
Codice regionale “2
o “ALL”
Asia, Taiwan e
Corea
Codice regionale
“A” o “ABC”
Codice regionale “3
o “ALL”
Centro e Sud
America
Codice regionale
“A” o “ABC”
Codice regionale “4
o “ALL”
1
ALL
2
ALL
3
ALL
4
ALL
4 It
Informazioni su dischi e file
Le operazioni e le funzioni relative a Blu-ray Disc/
DVD video possono essere diverse dalle spiegazioni
riportate in questo manuale e alcune di esse possono
essere vietate a causa delle impostazioni del
produttore del disco.
Se durante la riproduzione di un disco vengono
visualizzate una schermata di menu o istruzioni
operative, seguire la procedura di funzionamento
visualizzata.
A seconda del disco, la riproduzione di alcuni dischi
potrebbe non essere possibile.
Finalizzare tutti i supporti di registrazione che
vengono riprodotti in questo lettore.
Per “Finalizzazione” si intende il processo di
registrazione di un disco registrato in modo tale da
essere riproducibile anche in altri lettori/registratori
oltre che in questo lettore. Solo i dischi finalizzati
possono essere riprodotti in questo lettore. (Il lettore
non ha una propria funzione per finalizzare dischi).
Disco Super Audio CD (SA-CD)
Formato audio basato sugli standard CD correnti, ma
che comprende una quantità maggiore di
informazioni, offrendo co una qualità dell’audio
più elevata. Esistono tre tipi di dischi: single layer (a
strato singolo), dual layer (a doppio strato) e ibridi. I
dischi ibridi possono essere riprodotti sia su lettori
CD esistenti sia su lettori Super Audio perché
contengono informazioni audio CD standard e
informazioni Super Audio CD.
La presente unità non visualizza i dati di testo inclusi
nei dischi sul display del pannello anteriore.
Caricamento di un disco
Inserire il disco con l’etichetta rivolta verso l’alto.
Nel caso di un disco registrato su entrambi i lati,
girare verso il basso il lato da riprodurre.
La riproduzione può cominciare automaticamente a
seconda del disco e delle impostazioni del lettore.
A seconda del disco, potrebbe apparire prima il menu.
Il tempo necessario per caricare il disco può variare a
seconda del disco.
Australia Codice regionale
“B” o “ABC”
Codice regionale “4”
o “ALL”
Russia Codice regionale
“C” o “ABC”
Codice regionale “5”
o “ALL”
Note
Informazioni sulla gestione della regione
Destinazione BD video DVD-Video
4
ALL
5
ALL
Nota
Note
1
2
3
Tipi di dischi Super Audio CD
Disco single layer
Strato HD
Disco dual layer
Disco ibrido
Strato HD
Strato CD
Strato HD
Disco ibrido Super Audio CD
Strato CD riproducibile
mediante qualsiasi lettore
CD
- Audio stereo DSD ad alta
qualità
- Audio multicanale DSD ad alta
qualità
Strato ad alta densità (High Density)
contenente:
5 It
Informazioni su dischi e file
Introduzione
1
Italiano
Precauzioni per i dischi
Fare attenzione ai graffi e alla polvere
I dischi Blu-ray, DVD e CD sono sensibili alla
polvere, alle impronte digitali e soprattutto ai graffi.
Un disco graffiato potrebbe non essere riproducibile.
Maneggiare i dischi con cura e conservarli in un luogo
sicuro.
Conservazione appropriata dei dischi
Precauzioni di utilizzo
Pulizia della lente del pickup
Non utilizzare mai i dischi di pulizia disponibili in
commercio. L’uso di questi dischi può danneggiare
la lente.
Rivolgersi al più vicino centro di assistenza Yamaha
autorizzato per la pulizia della lente.
Avviso sulla visione di immagini
video 3D
Alcune persone potrebbero avvertire disturbi (come
per esempio affaticamento della vista, stanchezza o
nausea) durante la visione di immagini video 3D. Si
consiglia agli spettatori di prendersi pause
periodiche durante la visione di immagini video 3D.
In caso di disturbi, interrompere la visione fino a
quando il disturbo non scompare. Rivolgersi a un
medico in caso di disturbi gravi.
Leggere attentamente i manuali di istruzioni (Blu-
ray Disc e TV) e/o i messaggi di avviso che
appaiono sul TV.
La vista dei bambini piccoli (specialmente di quelli
al di sotto dei sei anni di età) è ancora in fase di
sviluppo. Rivolgersi al proprio medico (pediatra od
oculista) prima di consentire la visione di immagini
video 3D a bambini piccoli.
I bambini devono essere sorvegliati dagli adulti
affinché seguano le raccomandazioni sopra descritte.
Tecnologia Cinavia
La tecnologia Cinavia fa parte del sistema di
protezione dei contenuti di cui è dotato questo lettore
Blu-ray Disc.
È possibile che la riproduzione venga interrotta o che
l’audio sia temporaneamente disattivato e che il lettore
Blu-ray Disc visualizzi i seguenti messaggi, qualora si
cerchi di riprodurre una copia non autorizzata di
contenuti protetti dalla tecnologia Cinavia.
Questi messaggi sono visualizzati soltanto in inglese.
Avviso Cinavia
Questo prodotto utilizza la tecnologia Cinavia per limitare
l’uso di copie non autorizzate di video e film in
commercio e relative colonne sonore. Quando si identifica
un uso vietato di una copia non autorizzata, un messaggio
appare e la riproduzione o masterizzazione si interrompe.
Per ulteriori informazioni sulla tecnologia Cinavia
consultare il Centro informazioni consumatori online
all’indirizzo
http://www.cinavia.com
. Per richiedere ulteriori
informazioni su Cinavia per posta, inviare una cartolina
con il proprio indirizzo a: Consumer Information Center,
P.O. Box 86851, San Diego, CA, 92138, USA.
Collocare il disco al centro della sua
custodia e conservare la custodia e il disco
in posizione verticale.
Evitare di conservare i dischi in luoghi
esposti alla luce solare diretta, vicino ad
apparecchiature di riscaldamento o in
luoghi molto umidi.
Non fare cadere i dischi, né sottoporli a
forti vibrazioni o colpi.
Evitare di conservare i dischi in luoghi
molto polverosi o molto umidi.
Se la superficie è sporca, pulirla
delicatamente con un panno morbido e
inumidito (solo con acqua). Quando si
puliscono i dischi, muovere il panno
sempre dal foro centrale verso il bordo
esterno.
Non utilizzare spray detergenti per dischi,
benzene, solvente, liquidi di prevenzione
per l’elettricità statica o altri solventi.
Non toccare la superficie.
Non attaccare carta o etichette adesive al disco.
Se la superficie di riproduzione di un disco è sporca
o graffiata, il lettore può ritenere il disco
incompatibile e quindi espellerlo oppure può non
riprodurre correttamente il disco. Eliminare qualsiasi
traccia di sporco dalla superficie di riproduzione con
un panno morbido.
Nota
Riproduzione bloccata. Il contenuto eseguito è
protetto da Cinavia® e se ne vieta la
riproduzione su questo dispositivo.
Per ulteriori informazioni, recarsi all’indirizzo
http://www.cinavia.com. Codice messaggio 1.
Uscita audio temporaneamente disattivata.
Non regolare il volume di riproduzione. Il
contenuto eseguito è protetto da Cinavia® e
se ne vieta la riproduzione su questo
dispositivo.
Per ulteriori informazioni, recarsi all’indirizzo
http://www.cinavia.com
. Codice messaggio 3.
6 It
Pannello anteriore
1 p (On/Standby)
Attiva il lettore/lo imposta in modalità Standby.
Tenere premuto p sul pannello anteriore per più di
5 secondi per ripristinare il lettore (ripristino sistema).
2 Connettore USB (p. 16)
3 Indicatore SA-CD
Si illumina quando viene caricato un SA-CD e viene
selezionato lo strato SA-CD (p. 4).
4 Display del pannello anteriore
visualizza diverse informazioni sullo stato di
funzionamento del lettore.
5 Coperchio del vassoio del disco
6 (Estrai)
Apre/chiude il vassoio del disco.
7 (Ricerca all’indietro/Precedente):
Premere per passare alla traccia precedente e tenere
premuto per la ricerca all’indietro.
8 (Ricerca in avanti/Successivo):
Premere per passare alla traccia successiva e tenere
premuto per la ricerca in avanti.
9 (Riproduzione)
Avvia la riproduzione.
0 (Pausa)
Mette in pausa la riproduzione.
A (Arresto)
Arresta la riproduzione.
Rimuovere la pellicola protettiva dal pannello anteriore prima di utilizzare il lettore.
Comandi e funzioni
USB
5#%&
2 5 61 43 7 8 9 0 A
Nota
7 It
Comandi e funzioni
Introduzione
1
Italiano
Pannello posteriore
1 AUDIO OUT (L/R) (p. 13)
2 HDMI (p. 11)
3 DIGITAL OUT (COAXIAL/OPTICAL) (p. 13)
4 USB (p. 16)
5 NETWORK (p. 14)
6 REMOTE CONTROL (OUT/IN) (p. 17)
7 AC IN (p. 17)
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT
NETWORK
USB
HDMI
REMOTE CONTROL
OUT IN
AC IN
1 6 72 3 45
8 It
Comandi e funzioni
Telecomando
viene visualizzato nell’angolo in alto a sinistra
dello schermo quando il tasto premuto non è
disponibile.
1 Trasmettitore a infrarossi: Fa uscire il segnale a
infrarossi. Puntare questa finestra verso il sensore del
telecomando (p. 10).
2 p: Attiva il lettore o lo imposta in modalità Standby.
3 : Apre/chiude il vassoio del disco.
4 Tasti colore : Utilizzare questi tasti in base alle
istruzioni a schermo.
ZOOM : Ingrandisce/
rimpicciolisce. A ogni pressione del tasto le dimensioni
dello schermo cambiano (ingrandimento/
rimpicciolimento: 3 fasi ognuna).
PROGRAM :
Imposta l’ordine di
riproduzione (p. 25). È possibile impostare fino a 15
tracce (per un disco audio) o titoli/capitoli (DVD video).
SHUFFLE :
Seleziona la modalità di riproduzione shuffle (p. 23).
REPEAT
:
Modifica
la modalità di ripetizione. Ad ogni pressione del tasto la
modalità di ripetizione cambia, come indicato qui di seguito.
:Ripete il titolo attualmente riprodotto.
:Ripete il capitolo attualmente riprodotto.
:Ripete la cartella attualmente riprodotta.
:Ripete tutte le tracce/i file nel disco.
: Ripete la traccia/il file attualmente riprodotti.
5 Tasti numerici: Immettono numeri oppure, durante
la riproduzione, consentono il salto alla traccia/capitolo
corrispondente al numero indicato. I tasti potrebbero
non essere disponibili a seconda del tipo di disco e
delle condizioni di riproduzione.
6 CLEAR:
Cancella il numero immesso o la voce impostata.
7 PIP :
Attiva/disattiva la funzione Picture in Picture
(p. 26). Quando questa funzione è disponibile, viene
visualizzato il Segno PIP ( ) sullo schermo. È inoltre
possibile selezionare questa voce dal menu a schermo (p. 23).
Il Segno PIP è disponibile solo se Segno PIP è
impostato su Acceso (p. 31).
8 MIRACAST: Avvia Miracast (p. 22).
9 2ND AUDIO :
Seleziona l’audio secondario di
Picture in Picture (p. 26) o commenti sonori. Quando questa
funzione è disponibile, viene visualizzato il Simbolo audio
secondario ( ) sullo schermo (p. 34). È inoltre possibile
selezionare questa voce dal menu a schermo (p. 23).
Il Simbolo audio secondario è disponibile solo se
Simbolo audio secondario è impostato su Acceso (p. 31).
0
HOME:
Visualizza la schermata del menu HOME (p. 19).
Nota
PROGRAM SHUFFLE REPEAT
REPEAT A/B
ZOOM
AUDIO
SUBTITTLE
ANGLE
SEARCH
MIRACAST
CLEAR
PIP
HOME
2ND
AUDIO
ENTER
TOP MENU
RETURN ON SCREEN
POP-UP MENU
SETUP
STATUSSETUP
RED
GREEN BLUE
YELLOW
L
N
J
K
H
E
M
I
0
7
6
5
D
4
3
8
A
9
C
B
E
F
2
1
G
Nota
Nota
BD
DVD
PHOTO
DVD CD
DVD
CD
MUSIC PHOTO
BD
DVD
CD
PHOTO
BD
BD
9 It
Comandi e funzioni
Introduzione
1
Italiano
A TOP MENU : Visualizza la schermata del
menu principale, se il disco contiene un menu.
Selezionare la voce desiderata con 5/a/2/3 e
ENTER.
A seconda del disco le operazioni specifiche
potrebbero essere diverse. Seguire le istruzioni di
ogni schermata di menu.
B Tasti cursore (5/a/2/3): Spostano la selezione
nella schermata del menu.
ENTER: Seleziona il menu/la voce selezionata.
C RETURN: Torna al menu o alla schermata precedente
ecc.
D Tasti di comando
: Arresta la riproduzione.
:Mette in pausa la riproduzione.
: Riproduce i contenuti.
/: Salta all’indietro/in avanti.
/
:
Ricerca all’indietro/in avanti. A ogni pressione del
tasto la velocità di ricerca cambia (ricerca all’indietro/
in avanti: 5 fasi ognuna). Premere per riprendere
la riproduzione normale.
: Modifica la velocità di uno slide show (più
lento/più veloce: 3 fasi).
/
:
Premere per la ricerca/ripetizione istantanea. La
ricerca istantanea salta il contenuto di 30 secondi. La
ripetizione istantanea ripete il contenuto degli ultimi
10 secondi riprodotti.
E SETUP: Visualizza la schermata del menu SETUP
(p. 27).
F STATUS: Visualizza le informazioni di riproduzione
(p. 24).
G REPEAT A/B :
Riproduce una parte specifica che si desidera ripetere.
1 Premere REPEAT A/B sulla scena che si desidera
impostare come inizio. Sullo schermo viene
visualizzato “A”.
2 Premere nuovamente REPEAT A/B sulla scena
che si desidera impostare come fine. Sullo schermo
viene visualizzato “A-B”. Ha inizio la sequenza
ripetuta.
3 Per annullare la sequenza ripetuta,
premere
REPEAT A/B. “A-B” scompare e la sequenza
ripetuta termina.
A seconda delle caratteristiche del disco, potrebbe
non essere possibile eseguire questa funzione.
H SUBTITLE : Modifica le lingue
dei sottotitoli (p. 42), se disponibili È inoltre possibile
selezionare questa voce dal menu a schermo (p. 23).
I ANGLE : Modifica l’angolo della
videocamera se il video è registrato con angolazioni
multiple. Quando questa funzione è disponibile viene
visualizzato il Segno Angolo ( ) sullo schermo. È
inoltre possibile selezionare questa voce dal menu a
schermo (p. 23).
Il Segno Angolo è disponibile solo se Segno Angolo
è impostato su Acceso (p. 31).
J AUDIO : Modifica la lingua o il formato
dell’audio. È inoltre possibile selezionare questa voce
dal menu a schermo (p. 23).
K SEARCH : Salta a
un punto specifico durante la riproduzione. Per
dettagli su questa funzione, consultare la sezione “Uso
della ricerca” (p. 25). È inoltre possibile selezionare
questa voce dal menu di stato (p. 24).
L YouTube: Avvia YouTube (p. 21).
M POP-UP/MENU : Visualizza il menu pop-
up. I contenuti del menu visualizzato variano a
seconda del disco. Per dettagli sul metodo di
visualizzazione del menu pop-up e sul suo
funzionamento, consultare il manuale del disco.
La schermata del menu principale potrebbe essere
visualizzata premendo POP-UP/MENU a seconda
del DVD.
N ON SCREEN: Visualizza il menu a schermo (p. 23).
Nota
BD DVD
BD
DVD
CD
VIDEO MUSIC PHOTO
BD
DVD
CD
MUSIC
PHOTO
BD
DVD
CD
MUSIC
Nota
Nota
BD DVD CD
MUSIC
BD
DVD
BD
DVD
BD
DVD
BD
DVD
CD
MUSIC
BD
DVD
10 It
Comandi e funzioni
Caricamento delle batterie nel
telecomando
Sostituire entrambe le batterie quando il campo
operativo del telecomando diminuisce.
Utilizzare batterie AAA, R03, UM-4.
Assicurarsi che la polarità sia corretta. Vedere
l’illustrazione all’interno del vano batterie.
Se il telecomando non verrà utilizzato per lungo
tempo, rimuovere le batterie.
Non usare batterie vecchie insieme a batterie nuove.
Non usare assieme tipi differenti di batterie (per
esempio batterie alcaline e batterie al manganese).
Leggere attentamente la confezione, dato che le
batterie suddette, benché differenti, possono avere
forme e colori identici.
In caso di perdita dalle batterie, gettarle
immediatamente. Evitare di toccare il materiale
fuoriuscito e non lasciarlo venire a contatto con gli
indumenti ecc. Pulire accuratamente il vano prima di
installare delle batterie nuove.
Non gettare le batterie tra i normali rifiuti domestici;
smaltire le batterie in accordo con le
regolamentazioni locali.
Tenere le batterie fuori dalla portata dei bambini. Se
la batteria viene ingerita, consultare immediatamente
un medico.
Se si prevede di non utilizzare il telecomando per
lunghi periodi di tempo, rimuovere le batterie dal
telecomando.
Non ricaricare o smontare le batterie in dotazione.
Campo operativo approssimativo del
telecomando
Funzione ID
Se si utilizzano più prodotti Yamaha, il telecomando
potrebbe azionare altri prodotti oppure i telecomandi di
altri prodotti potrebbero azione questo lettore. In questo
caso, cambiare l’ID del telecomando per evitare
azionamenti indesiderati. Se l’ID del telecomando è stato
cambiato, verificare di aver selezionato lo stesso ID
dell’unità principale.
L’impostazione predefinita è ID1.
1 Impostazione del telecomando
Per cambiare ID da ID1 a ID2, tenere premuti
simultaneamente il tasto rosso e il tasto numerico 2
per 7 secondi. Per cambiare ID da ID2 a ID1, tenere
premuti simultaneamente il tasto rosso e il tasto
numerico 1 per 7 secondi.
2 Impostazione dell’unità principale
Tenere premuti simultaneamente i tasti
e sul pannello anteriore per 2 secondi
per visualizzare l’ID corrente quando:
Non sono caricati dischi nel lettore.
Il vassoio del disco è chiuso.
La riproduzione è in arresto.
“NO DISC” è visualizzato sul display del
pannello anteriore.
Tenere premuti i tasti per altri 2 secondi per
cambiare l’ID tra ID1 e ID2.
Se il telecomando resta privo di batterie per qualche
minuto o se contiene batterie esaurite, l’ID del
telecomando viene impostato automaticamente su
ID1. Per utilizzare il telecomando con
l’impostazione ID2, inserire batterie nuove e
impostare nuovamente l’ID del telecomando.
Quando il lettore è ripristinato, l’ID del telecomando
diventa ID1.
Note
1
3
22
Note
USB
SA-CD
30°30°
Sensore del telecomando
6 m
11 It
Collegamenti
2
Italiano
COLLEGAMENTI
Effettuare i collegamenti audio/video a seconda dell’apparecchiatura che si desidera utilizzare.
Vedere pagina 35 per informazioni sui formati di uscita audio/video.
Preparare per i collegamenti i cavi disponibili in commercio. Il tipo e il numero di cavi necessari variano a seconda
dell’apparecchiatura da collegare.
Riproduzione audio/video mediante TV e ricevitore AV
Consultare “Collegamento a un TV via ricevitore AV” (p. 12)
Riproduzione audio/video utilizzando solo il TV
Consultare “Collegamento diretto a un TV” (p. 12)
Riproduzione audio/video mediante TV e apparecchiature audio
Consultare “Collegamento a un TV e ad apparecchiature audio” (p. 13)
Informazioni su HDMI
È possibile apprezzare immagini e suoni digitali di elevata
qualità tramite il terminale HDMI utilizzando cavi HIGH
SPEED HDMI (disponibili in commercio) con il logo
HDMI (come mostrato sul retro della confezione).
Per informazioni sulla funzione Controllo HDMI,
consultare la sezione “Controllo HDMI” (p. 30).
Per modificare la modalità di uscita del terminale
HDMI, configurare “HDMI” (p. 34) in Impostazione
Audio.
Collegamento per la riproduzione di
dischi Blu-ray 3D
Per riprodurre dischi Blu-ray 3D su questo lettore, il
sistema deve rispettare le seguenti condizioni.
Il TV e il ricevitore AV (se disponibile) devono
supportare la funzione 3D.
Uscita 3D in Impostazione Display (p. 32) è
impostato su “Auto”.
Collegamenti audio/video
Suggerimenti
USB
5#%&
Questo lettore
Ricevitore AV
TV
Video (HDMI)Video/audio
(HDMI)
Diffusori
Audio
USB
5#%&
Questo lettore
TV
Video/audio
(HDMI)
USB
5#%&
Questo lettore
TV
Video (HDMI)
Audio
(coassiale, ottico o analogico)
Apparecchiature audio
(p.es. soundbar)
Suggerimenti
12 It
Collegamenti audio/video
Collegamento a un TV via
ricevitore AV
Collegare il lettore al ricevitore AV e quest’ultimo al TV
tramite cavi HDMI.
Per dettagli relativi al collegamento dei diffusori
consultare i manuali di istruzioni in dotazione con il
ricevitore AV e i diffusori.
Attenzione!
Non collegare il cavo di alimentazione di
questo lettore fino a quando non sono stati
completati tutti gli altri collegamenti.
Collegamento diretto a un TV
Collegare il lettore al TV con un cavo HDMI.
Attenzione!
Non collegare il cavo di alimentazione di
questo lettore fino a quando non sono stati
completati tutti gli altri collegamenti.
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT
NETWORK
USB
HDMI
HDMI IN
HDMI OUT
HDMI IN
HDMI
Questo lettore
Ricevitore AV
TV
Terminale HDMI
Diffusori
Cavo HDMI
Ingresso HDMI
Cavo HDMI
Uscita HDMI
Ingresso HDMI
Collegamenti
diffusori
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT
NETWORK
USB
HDMI
HDMI
HDMI IN
Questo lettore
TV
Terminale HDMI
Cavo HDMI
Ingresso HDMI
13 It
Collegamenti audio/video
Collegamenti
2
Italiano
Collegamento a un TV e ad apparecchiature audio
Collegare il lettore al TV con un cavo HDMI e all’apparecchiatura audio con un cavo audio (digitale ottico, digitale
coassiale o cavo stereo).
Attenzione!
Non collegare il cavo di alimentazione di questo lettore fino a quando non sono stati
completati tutti gli altri collegamenti.
Per modificare la modalità di uscita delle prese COAXIAL/OPTICAL, configurare “Coassiale / Ottico” (p. 34) in
“Impostazione Audio”.
Se l’uscita per la riproduzione audio avviene sia dai diffusori del TV sia dalle apparecchiature audio, impostare
HDMI su Spento in Impostazione Audio per disabilitare l’uscita audio al TV.
Non è possibile inviare in uscita i segnali audio dei SACD dalla presa COAXIAL o OPTICAL (p. 35).
Suggerimenti
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT
NETWORK
USB
HDMI
HDMI
HDMI IN
COAXIAL
OPTICAL
AUDIO OUT
COAXIAL OPTICALAUDIO
Questo lettore
TV
Prese OPTICAL, COAXIAL o
AUDIO OUT L/R
Cavo audio
(digitale ottico, digitale coassiale
o cavo stereo).
Ingresso audio
(digitale ottico, digitale coassiale
o stereo analogico).
Apparecchiature audio
(p.es. soundbar)
Ingresso HDMI
Cavo HDMI
Uscita HDMI
14 It
Collegando il lettore alla rete (wireless o cablata), è possibile utilizzare le seguenti funzioni:
Riproduzione dei contenuti da server DLNA (PC o NAS) (p. 19)
Riproduzione di contenuti da vari servizi di rete (p. 21)
Riproduzione di dischi compatibili BD-Live (p. 25)
Controllo remoto del lettore da dispositivi mobili (AV CONTROLLER) (p. 22)
Per utilizzare i servizi di rete o la funzione BD-Live, è necessaria una connessione Internet a banda larga.
Consultare il manuale d’istruzioni del dispositivo dal momento che l’apparecchio collegato e il metodo di
connessione possono differire a seconda del proprio ambiente di rete.
Utilizzare un cavo/router di rete che supporti 10BASE-T/100BASE-TX.
Se si utilizza un router che supporta DHCP, non è necessario configurare alcuna impostazione di rete per questo
lettore in quanto i parametri di rete (come l’indirizzo IP) verranno assegnati automaticamente. È necessario
configurare le impostazioni di rete soltanto se il router non supporta DHCP o se si desidera configurare
manualmente le impostazioni (p. 32).
Collegamento wireless
Utilizzando la funzione wireless del lettore è possibile
connetterlo alla rete senza fili (router). Per utilizzare la
funzione Wi-Fi, consultare “Impostazione connessione
wireless” (p. 18) e configurare le relative impostazioni.
Collegamento cablato
Collegare il lettore alla rete (router) mediante un cavo di
rete schermato STP (Shielded Twisted Pair).
Collegamento di rete
Note
Suggerimento
USB
5#%&
Questo lettore
Internet Modem Router PC
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT
NETWORK
USB
HDMI
REMOTE
C
OUT
LAN
NETWORK
Questo lettore
Internet Modem Router PC
Terminale
NETWORK
Cavo di rete
Terminale LAN
15 It
Collegamento di rete
Collegamenti
2
Italiano
Impostazione del server DLNA
DLNA consente di condividere contenuti multimediali (come video, musica e foto) memorizzati sul server DLNA (PC o
NAS) connesso alla rete e di riprodurli sul lettore.
Inoltre, è possibile utilizzare un dispositivo mobile come uno smartphone o un tablet come controller wireless per
comandare il lettore via rete.
Per utilizzare le funzioni DLNA, configurare il server DLNA in modo seguente una volta effettuati i collegamenti di rete
(p. 14).
Per utilizzare le funzioni DLNA, tutti i dispositivi devono essere collegati alla stessa rete.
Per utilizzare un NAS come server DLNA, il NAS deve essere compatibile.
Impostazione della condivisione di
contenuti su server DLNA
Per riprodurre contenuti multimediali presenti sul server
DLNA (PC o NAS), è prima necessario configurare le
impostazioni di condivisione multimediale sul software
installato sul server DLNA.
Per informazioni su come impostare il server DLNA
o sui formati di file supportati dal server, consultare
il manuale d’istruzioni del server e del relativo
software.
1 Accendere il server DLNA (PC o NAS) e il lettore.
2 Se si utilizza il PC come server DLNA, assicurarsi che
vi sia installato un software di server DLNA come per
esempio Windows Media Player 12.
3 Sul server DLNA, abilitare la condivisione
multimediale e consentirla verso questo lettore.
Ora l’impostazione del server DLNA è stata
completata. Per apprezzare i contenuti del server
DLNA su questo lettore, selezionare un server DLNA e
il file multimediale dal menu HOME (p. 19).
Utilizzare un dispositivo mobile come
controller multimediale
Se si possiede un dispositivo mobile (come uno
smartphone o un tablet) che supporta la funzione Digital
Media Controller (DMC), è possibile controllare il lettore
via rete dallo smartphone o tablet.
Per consentire al dispositivo mobile di controllare
questo lettore, impostare Controllo DMC (p. 32) nel
menu SETUP su Attivare (opzione predefinita).
Per verificare se il proprio dispositivo mobile
supporta la funzione DMC, consultare il manuale
d’istruzioni del dispositivo e del relativo software.
Note
USB
5#%&
DLNA
Questo lettore
Server DLNA
(PC o NAS)
Telecomando Controller
(dispositivo mobile)
Suggerimento Suggerimenti
16 It
Collegando un dispositivo di archiviazione USB al connettore USB sul pannello anteriore o posteriore del lettore, è
possibile riprodurre i file multimediali memorizzati sul dispositivo di archiviazione USB (p. 19).
Yamaha non può garantire che tutte le marche di dispositivi di archiviazione USB funzionino correttamente con il
lettore.
Collegare un dispositivo di archiviazione USB a uno dei connettori USB (fronte/retro) del lettore quando si utilizza
la funzione BD-Live (p. 26).
Collegamento USB
Note
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT
NETWORK
USB
HDMI
USB
USB
USB
Questo lettore
Connettore USB (fronte)
Questo lettore
Dispositivo di
archiviazione USB
Connettore USB (retro)
Dispositivo di
archiviazione USB
17 It
Collegamenti
2
Italiano
Collegamento alle prese audio
REMOTE CONTROL
È possibile trasmettere e ricevere i segnali del
comando a distanza collegandosi alle prese
REMOTE CONTROL (OUT/IN).
Collegare saldamente cavi mini RCA da 3,5 mm
monoaurali (disponibili in commercio) ai terminali
REMOTE CONTROL (OUT/IN).
Se il ricevitore AV è un prodotto Yamaha ed è in
grado di trasmettere segnali di comando SCENE, è
possibile controllare il lettore con la funzione
SCENE.
Attenzione!
Non collegare il cavo di alimentazione di
questo lettore fino a quando non sono stati
completati tutti gli altri collegamenti.
Per dettagli relativi alla funzione SCENE, consultare
il manuale di istruzioni in dotazione con il ricevitore
AV Yamaha.
È possibile collegare un componente Yamaha (quale
un lettore CD) che supporta la funzione SCENE alla
presa REMOTE CONTROL (OUT) di questo
lettore.
Collegamento del cavo di
alimentazione
Una volta completati tutti i collegamenti, inserire il
cavo di alimentazione in dotazione nell’ingresso AC
IN sul lato posteriore del lettore, quindi inserirlo
nella presa CA esterna.
Altri collegamenti
NETWORK
USB
REMOTE CONTROL
OUT IN
REMOTE CONTROL IN
REMOTE CONTROL OUT
Questo lettore
Alla presa
REMOTE
CONTROL (IN)
Cavo mini RCA da 3,5
mm monoaurale
Alla presa
remote
control out
Componente Yamaha
Alla presa
remote
control in
Cavo mini RCA
da 3,5 mm
monoaurale
Ricevitore a segnali infrarossi
o componente Yamaha
(es., un ricevitore AV)
Alla presa
REMOTE
CONTROL (OUT)
Suggerimenti
AC IN
Alla presa CA
18 It
RIPRODUZIONE
Impostazione mediante
Installazione rapida
Installazione rapida consente l’agevole impostazione di
lingua, risoluzione e rapporto di aspetto dello schermo. La
schermata di Installazione rapida viene visualizzata
quando il lettore viene attivato per la prima volta dopo
l’acquisto. È possibile eseguire la stessa impostazione dal
menu SETUP menu = Sistema = Installazione rapida.
1
Quando viene visualizzata la schermata Installazione
rapida, premere
ENTER
per avviare Installazione rapida.
2 Impostare la lingua, la risoluzione e il rapporto di
aspetto dello schermo attenendosi ai messaggi
visualizzati sullo schermo.
Se non appare alcuna immagine dopo il
completamento dell’Installazione rapida, consultare
la sezione “Risoluzione dei problemi” (p. 39).
Quando il lettore viene acceso, appare un messaggio
di avviso riguardante la riproduzione di video 3D.
Premere ENTER per ignorare il messaggio o
CLEAR per disabilitarlo (p. 30).
Impostazione connessione wireless
Per collegare il lettore alla rete (router) senza fili, seguire
la procedura indicata di seguito.
Se il router (punto di accesso) supporta la funzione WPS
(Impostazione Wi-Fi protetta), è possibile utilizzare il
metodo d’impostazione automatica per collegare il router
senza dover immettere manualmente le informazioni di
rete come per esempio l’SSID.
1 Premere SETUP per visualizzare la schermata del
menu SETUP.
2 Selezionare Impostazione Generale = Rete =
Impostazione connessione = Wireless.
3 Premere 2/3 per selezionare Sì, quindi premere
ENTER.
4 Premere 2/3 per selezionare uno dei seguenti metodi
d’impostazione, quindi premere ENTER.
Ricerca: Selezionare questa opzione per cercare le reti
wireless disponibili. Una volta apparso l’elenco delle reti,
selezionare l’SSID a cui si desidera connettersi e
immettere la password.
Manuale: Selezionare questa opzione per immettere
manualmente le informazioni di rete come per esempio
l’SSID.
Auto: Selezionare questa opzione per utilizzare la
funzione WPS. Selezionare il metodo PBC (Push Button
Configuration) oppure PIN code e seguire i messaggi a
schermo.
Per dettagli su come utilizzare il router (punto di
accesso), consultare il relativo manuale di istruzioni.
Se WPS non funziona, selezionare “Ricerca” o
“Manuale” per configurare le impostazioni di
collegamento wireless.
I dispositivi che utilizzano una banda di frequenza
2,4 GHz, come forni a microonde, dispositivi
Bluetooth o dispositivi cordless digitali, possono
interrompere la comunicazione. Allontanare il
lettore da tali dispositivi oppure spegnerli.
La velocità di connessione della rete wireless
dipende dall’ambiente di rete (tipo di router, distanza
tra il router e il lettore, luogo d’installazione ecc.).
Nel caso la riproduzione audio o video venga
interrotta, spostare il lettore più vicino al router o
cambiare l’orientamento del lettore o dell’antenna
del router.
Impostazioni iniziali
Note
Note
19 It
Riproduzione
3
Italiano
Il menu HOME consente di eseguire le seguenti operazioni di base con il lettore.
Sfogliare e riprodurre file multimediali su vari dischi, dispositivi di archiviazione USB e server DLNA (PC o
NAS).
Accedere a vari dispositivi di rete (p. 21)
Visualizzare il menu SETUP. (p. 27)
Per dettagli sui dischi e formati riproducibili, consultare pagina 3.
Per riprodurre sul lettore contenuti i contenuti multimediali del lettore, l’impostazione di condivisione multimediale
(p. 15) sul server deve essere configurata.
Riproduzione di foto/musica/video
Funzionamento di base
2/3/5/a: Sposta la selezione.
2: Torna alla cartella precedente.
HOME: Passa alla/esce dalla schermata del menu HOME.
ENTER: Conferma la cartella/file.
Operazioni comuni per la riproduzione
dei file in una cartella selezionata
Esempio: Selezione del file di un filmato su un
dispositivo di archiviazione USB
Arrestare la riproduzione del video prima di portarsi
alla schermata del menu HOME.
1 Premere HOME per passare alla schermata del menu
HOME.
2 Premere 5/a per selezionare la voce che contiene il
file che si desidera riprodurre, quindi premere ENTER.
Se il server DLNA non appare in elenco, verificare
che il server sia acceso e selezionare Ricerca DLNA
per aggiornare l’elenco.
3 Selezionare la cartella Foto, Musica, Video o AVCHD
che si desidera riprodurre, quindi premere ENTER.
Per tornare alla cartella precedente, premere RETURN
o selezionare .
Menu HOME
Suggerimenti
Nota
MIRACAST
PIP
HOME
2ND
AUDIO
ENTER
TOP MENU
RETURN ON SCREEN
POP-UP MENU
SETUP
Nota
Continua alla pagina successiva. \
20 It
Menu HOME
Tenere presente che nella fase successiva verrà
visualizzato solo il tipo di file selezionato in questa
fase. Ad esempio, se in questa fase si seleziona la
cartella Foto, da ora in poi verranno visualizzati solo
file di foto.
4 Selezionare la cartella contenente il file che si desidera
riprodurre.
5 Selezionare il file che si desidera riprodurre, quindi
premere ENTER.
Quando viene selezionato un file video, parte la
riproduzione.
Quando viene selezionato un file musicale, viene
visualizzata la schermata di stato e quindi parte la
riproduzione.
Quando viene selezionato un file di foto, parte uno
slide show (presentazione tipo diapositive).
Per godersi lo slide show con una base musicale,
premere HOME per tornare alla schermata del menu
HOME mentre viene riprodotta la musica e
selezionare il file di foto.
Il file visualizzato potrebbe non essere riprodotto a
seconda del contenuto.
Operazioni per la visualizzazione delle
foto
Durante la visualizzazione delle foto, i tasti sul
telecomando funzionano come indicato qui di seguito.
: Arresta lo slide show e torna al browser dei file.
: Mette in pausa lo slide show.
: Riproduce uno slide show.
: Passa alla foto successiva.
: Passa alla foto precedente.
: Accelera lo slide show in 3 fasi.
: Rallenta lo slide show in 3 fasi.
5: Capovolge una foto.
a: Riflette una foto.
2: Ruota una foto in senso antiorario.
3: Ruota una foto in senso orario.
ZOOM: Ingrandisce/rimpicciolisce una foto
(ingrandimento/rimpicciolimento: 3 fasi ognuna).
5/a/2/3: Esegue una panoramica in modalità zoom
quando una foto è più grande dello schermo.
Nota
Suggerimento
Nota
21 It
Riproduzione
3
Italiano
È possibile riprodurre contenuti multimediali quali foto e video utilizzando i seguenti servizi di rete.
Dropbox
Picasa Web Albums
YouTube
L’accesso ai contenuti offerti da terzi richiede una connessione Internet ad alta velocità ed eventualmente la
registrazione di un account e di un abbonamento a pagamento.
I servizi di contenuti di terzi possono subire modifiche, sospensioni, interruzioni o dismissioni in qualsiasi
momento senza preavviso. Yamaha non si assume alcuna responsabilità in merito.
Alcuni contenuti potrebbero essere disponibili solamente per determinati paesi e presentati in determinate lingue.
Yamaha non dichiara né garantisce che i servizi di contenuti continueranno a essere forniti o disponibili per un
determinato periodo di tempo e nega qualunque garanzia, esplicita o implicita, in tal senso.
1 Premere HOME per passare alla schermata del menu
HOME.
Per passare direttamente al menu YouTube, premere
YouTube.
2 Premere 5/a per selezionare Servizi di rete, quindi
premere ENTER.
3 Premere 2/3/5/a per selezionare il servizio di rete
desiderato, quindi premere ENTER.
4 Premere 2/3/5/a per selezionare una voce, quindi
premere ENTER per confermare la selezione (o
avviare la riproduzione).
Per uscire da un servizio di rete, premere HOME.
Le procedure di funzionamento successive al
passaggio 4 variano a seconda delle voci di menu
offerte da ciascun servizio.
Informazioni su Dropbox™
Dropbox è un servizio di rete che consente di
memorizzare i propri file su Dropbox e poi accedervi da
computer, telefono o tablet. Aggiungere automaticamente
foto e mostrare video ovunque ci si trovi.
Per ulteriori informazioni visitare il sito
www.dropbox.com.
Informazioni su Picasa™ Web
Album
Picasa Web Album è un servizio di rete che consente di
condividere foto con amici e parenti o di esplorare foto
pubbliche.
Per ulteriori informazioni visitare il sito
picasaweb.google.com.
Informazioni su YouTube™
YouTube è un servizio di rete che consente di scoprire,
guardare e condividere video originali via Internet.
Per ulteriori informazioni visitare il sito
www.youtube.com.
Uso dei servizi di rete
Note
Suggerimento
Suggerimento
Nota
Dropbox è un marchio di fabbrica di Dropbox Inc.
Picasa e il logo Picasa sono marchi di fabbrica di Google.
Inc.
YouTube e il logo YouTube sono marchi di fabbrica di
Google. Inc.
22 It
Miracast è una soluzione per visualizzare in maniera fluida video tra dispositivi senza bisogno di cavi o connessione di
rete tramite un punto di accesso (Wi-Fi Direct). È possibile visualizzare immagini da un dispositivo compatibile Miracast
(smartphone ecc.) sullo schermo del TV collegato al lettore.
Per verificare se il proprio dispositivo è conforme Miracast, consultare il relativo manuale.
Quando Miracast è abilitato sul lettore, le altre funzioni di rete (come per esempio DLNA) non sono disponibili.
1 Premere MIRACAST.
2 Utilizzare lo smartphone entro 60 secondi per abilitare
Miracast e selezionare questo lettore come il
dispositivo a cui connettersi.
Per dettagli su come utilizzare lo smartphone,
consultare il relativo manuale di istruzioni.
3 Per uscire da Miracast, premere MIRACAST.
Per uscire da Miracast è anche possibile premere
HOME oppure RETURN.
L’applicazione “AV CONTROLLER” consente a un dispositivo mobile di comandare da remoto il lettore.
È possibile controllare le funzioni base di un lettore Yamaha Blu-ray Disc™ come riproduzione, pausa, salto,
alimentazione e navigazione con il cursore.
L’applicazione “AV CONTROLLER” è disponibile in varie lingue.
Per maggiori informazioni su “AV CONTROLLER”, visitare il sito web Yamaha.
Visualizzare foto e video dello smartphone
sullo schermo TV (Miracast™)
Note
USB
5#%&
Dispositivo
compatibile Miracast
(smartphone ecc.)
Questo lettore
TV
Suggerimento
A seconda dell’ambiente, si possono verificare interruzioni audio/video o è possibile che appaiano disturbi sullo
schermo TV. In tal caso, attenersi alle seguenti istruzioni.
Avvicinare il dispositivo Miracast a questo lettore.
Spegnere altri dispositivi wireless non in uso.
Allontanare il dispositivo Miracast e questo lettore da forni microonde, dispositivi Bluetooth o altri dispositivi
wireless.
Controllo remoto del lettore da dispositivi mobili
(AV CONTROLLER)
AV CONTROLLER
23 It
Riproduzione
3
Italiano
Questo capitolo spiega la modalità di riproduzione dei
dischi Blu-ray Disc disponibili in commercio, dei DVD,
dei SA-CD e dei CD, nonché dei dischi registrati DVD-
RW/R.
Per il funzionamento della riproduzione di base,
vedere pagina 8.
Menu a schermo (On Screen)
Per visualizzare il menu a schermo, premere ON
SCREEN. Successivamente, premere 5/a/2/3 per
selezionare una voce, quindi premere ENTER per attivare
la funzione desiderata.
Il menu a schermo contiene le seguenti voci.
Titolo :Mostra il numero del titolo
attualmente riprodotto. È possibile passare al titolo
desiderato selezionandolo da questa voce.
Capitolo : Mostra il numero del
capitolo attualmente riprodotto. È possibile passare al
capitolo desiderato selezionandolo da questa voce.
Brano/File : Mostra il
numero di traccia/file attualmente riprodotto. È possibile
passare alla traccia/al file desiderato selezionandolo da
questa voce.
Tempo : Mostra il
tempo di riproduzione. Selezionare il tipo di
visualizzazione desiderata scegliendo tra le opzioni
seguenti:
Tempo di riproduzione trascorso del titolo, capitolo,
disco, traccia o file
Tempo di riproduzione rimanente del titolo, capitolo,
disco, traccia o file
Modalità/Modalità di riproduzione
: Mostra la
riproduzione attuale. È possibile selezionare la modalità di
riproduzione scegliendo tra le opzioni seguenti:
Normale: Riproduzione normale.
Shuffle: Riproduzione casuale senza ripetizione.
Casuale: Riproduzione casuale con ripetizione.
Normale
Shuffle CH (capitolo)
Shuffle TT (titolo)
Shuffle All
Random CH (capitolo)
Random TT (titolo)
Random All
Normale
Shuffle F (cartella)
Casuale F (cartella)
Audio : Mostra la lingua/segnale
audio del Blu-ray Disc/DVD attualmente selezionato. È
possibile selezionare il tipo di audio desiderato.
Angolo : Mostra il numero di angolazione
attualmente selezionato. Se il video è registrato in più
angolazioni, è possibile modificare l’angolazione.
Sottotitolo : Mostra la lingua dei
sottotitoli attualmente selezionata quando sono disponibili
i sottotitoli.
Stile sottotitolo : Mostra lo stile dei sottotitoli
attualmente selezionato. Questa funzione è disponibile
solo per sottotitoli di file video esterni. È possibile
selezionare lo stile di testo dei sottotitoli desiderato.
Bitrate : Mostra il
bitrate del segnale audio/video.
Secondo Video : At
tiva
/disattiva il PIP (p. 8).
Secondo Audio :Attiva/disattiva l’audio
secondario (p. 8).
Ricerca Instantanea
: Salta 30 secondi.
Replay Instantaneo
: Ripete il contenuto
degli ultimi 10 secondi riprodotti.
Selezione CC
: Imposta i sottotitoli visualizzati.
Slide Show :
Mostra la velocità dello slide show. È possibile
selezionare la velocità dello slide show tra Lento/Medio/
Veloce.
Transizione : Mostra il modo in cui una foto
viene visualizzata sullo schermo. È possibile selezionare il
tipo di transizione.
Code Page : Seleziona il codice carattere del
sottotitolo aggiunto al video (p. 41).
Funzionamento di riproduzione avanzata
Nota
BD
DVD
BD
DVD
CD
PHOTO
BD
DVD
CD
VIDEO MUSIC
DVD
CD
PHOTO
CD
DVD
VIDEO MUSIC PHOTO
BD DVD
BD
DVD
BD
DVD
VIDEO
BD
BD DVD CD VIDEO MUSIC
BD
BD
BD DVD CD VIDEO MUSIC
BD DVD
CD
VIDEO MUSIC
BD DVD
PHOTO
PHOTO
VIDEO
24 It
Funzionamento di riproduzione avanzata
Menu di stato
Mostra varie impostazioni, quali l’impostazione dei
sottotitoli, dell’angolazione e il numero di titolo/capitolo/
traccia in corso di riproduzione. Per visualizzare il menu
di stato, premere STATUS. Il menu di stato contiene i
seguenti menu.
Esempio: Le icone durante la riproduzione di un Blu-ray
Disc
1 (Stato di riproduzione)
2 (Icona tipo disco/file video)
3 (Numero titolo in riproduzione): È possibile
saltare a un titolo specifico con il tasto SEARCH
(p. 9).
4 (Numero capitolo in riproduzione): È
possibile saltare a un capitolo specifico con il tasto
SEARCH (p. 9).
5 (Tempo di riproduzione trascorso): È
possibile saltare a un punto specifico con il tasto
SEARCH (p. 9).
6
(Modalità di ripetizione):
Mostra la modalità di
ripetizione attuale (p. 8).
7 (Audio attualmente selezionato): È possibile
modificare la lingua o il formato dell’audio con il tasto
AUDIO.
8 (Sottotitoli attualmente selezionati): È
possibile modificare la lingua dei sottotitoli con il tasto
SUBTITLE.
Esempio: Le icone durante la riproduzione di file
musicali
1 (Stato di riproduzione)
2
(Modalità di ripetizione):
Mostra la modalità di
ripetizione attuale (p. 8).
3 (Icona tipo disco/file musicale)
4 (Immagine) : Visualizza l’eventuale
immagine contenuta nel file.
5 (Numero brano/file in riproduzione): È
possibile saltare a una traccia specifica con il tasto
SEARCH (p. 9).
6 (Informazioni) : Visualizza le eventuali
informazioni musicali contenute nel file.
7 (Tempo di riproduzione trascorso): È
possibile saltare a un punto specifico con il tasto
SEARCH (p. 9).
8 (Barra di avanzamento) : Mostra lo stato
di avanzamento della canzone corrente.
1 (Stato di riproduzione)
2 (Icona file di foto)
3 (Numero di file in visualizzazione)
4
(Modalità di ripetizione):
Mostra la modalità di
ripetizione attuale (p. 8).
5 (Velocità slide show)
BD
DVD
VIDEO
1 2 3 4 5
6 7 8
DVD
CD
MUSIC
MUSIC
MUSIC
PHOTO
1 2 3 4 5
25 It
Funzionamento di riproduzione avanzata
Riproduzione
3
Italiano
Riproduzione programmata
Questa funzione consente di programmare l’ordine di
riproduzione delle tracce di un disco audio o dei capitoli di
un DVD.
Premere PROGRAM durante la riproduzione per
visualizzare la finestra PROGRAMMA per programmare
l’ordine di riproduzione.
È possibile programmare fino a 15 tracce/capitoli.
Esempio: Programmazione dell’ordine di riproduzione
delle tracce di un CD
1 Premere PROGRAM durante la riproduzione.
2 Premere ENTER per programmare l’ordine di
riproduzione.
Per i dischi audio, premere 5/a per selezionare la
traccia desiderata, quindi premere ENTER.
Per i dischi DVD-VIDEO, selezionare il titolo
(indicato con TT) e il capitolo (indicato con CH)
desiderato invece della traccia.
Per cancellare una traccia impostata, selezionare la
traccia da cancellare, quindi premere CLEAR.
Premere RETURN per annullare la riproduzione
programmata.
3 Terminata la programmazione, premere per
impostare e avviare la riproduzione programmata.
4 Per annullare la riproduzione programmata, arrestare
completamente la riproduzione premendo il tasto .
Uso della ricerca
Questa funzione consente il salto a uno specifico punto
durante la riproduzione.
1 Premere SEARCH durante la riproduzione. Viene
visualizzata la barra di stato.
2 Premere 5/a/2/3 per selezionare una delle voci qui
di seguito, quindi premere ENTER.
:
Numero titolo (indicato con )
Numero capitolo (indicato con )
Tempo trascorso del titolo (indicato con )
Tempo trascorso del capitolo (indicato con )
:
Numero brano (indicato con )
Tempo trascorso della traccia (indicato con )
Tempo trascorso del disco (indicato con )
:
Numero file (indicato con )
Tempo trascorso del file (indicato con )
:
Numero file (indicato con )
3 Premere 5/a o i tasti numerici per impostare/regolare
il valore della voce selezionata, quindi premere
ENTER per saltare al punto specifico.
4 Per chiudere la barra di stato, premere STATUS.
Riproduzione di BONUSVIEW™ e
BD-Live™
Questo lettore supporta le funzioni di riproduzione
BONUSVIEW (p. 41) (BD-ROM Profilo 1 Versione 1.1)
e (p. 41) (BD-ROM Profilo 2).
Le funzioni e il metodo di riproduzione variano a
seconda del disco. Consultare la guida del disco o il
manuale d’uso in dotazione.
DVD
CD
Nota
BD
DVD
CD
MUSIC
PHOTO
BD DVD
CD
VIDEO MUSIC
PHOTO
26 It
Funzionamento di riproduzione avanzata
Uso della funzione Picture in
Picture (riproduzione audio/video
secondario)
Un BD video che comprende audio e video secondari
compatibili con la funzione Picture in Picture può essere
riprodotto simultaneamente con audio e video secondario
come video in miniatura nell’angolo.
Quando viene visualizzato il Segno PIP
( ) o il Simbolo audio secondario
( ), premere PIP per attivare o
disattivare la funzione Picture in
Picture.
Per ascoltare l’audio secondario, accertarsi che
l’impostazione Uscita audio (Coassiale / Ottico o
HDMI) sia PCM o Ricodifica (p. 34).
A seconda del disco, per ascoltare l’audio
secondario, potrebbe essere necessario impostare
l’audio secondario su Acceso nel menu principale
del disco (p. 9).
L’audio e il video secondario per la funzione Picture
In Picture potrebbero essere riprodotti
automaticamente ed essere rimossi a seconda del
contenuto. Quindi le aree riproducibili potrebbero
essere limitate.
Uso della funzione BD-Live™
1. Impostare la rete (p. 31).
2. Collegare il dispositivo di
archiviazione USB a questo lettore
(p. 16).
I dati BD-Live sono salvati in un dispositivo di
archiviazione USB collegato a questo lettore. Per
utilizzare queste funzioni, collegare un dispositivo di
archiviazione USB che supporti USB 2.0 High
Speed (480 Mbit/s) a uno dei connettori USB
(fronte/retro) del lettore per utilizzare il dispositivo
di archiviazione come Archivio locale.
L’Archivio locale viene utilizzato come memoria
ausiliaria durante la riproduzione del Blu-ray Disc.
Utilizzare un dispositivo di archiviazione USB con
almeno 2GB di spazio libero.
Quando necessario, la cartella BUDA viene creata
automaticamente nel dispositivo di archiviazione
USB.
Se lo spazio di memoria è insufficiente i dati non
verranno copiati/scaricati. Cancellare i dati non
necessari o utilizzare un nuovo dispositivo di
archiviazione USB.
Per il caricamento dei dati (lettura/scrittura) potrebbe
essere necessario del tempo.
Yamaha non può garantire che tutte le marche di
dispositivi di archiviazione USB funzionino
correttamente con il lettore.
Non utilizzare un cavo di prolunga USB quando si
collega un dispositivo di archiviazione USB al
connettore del lettore. L’utilizzo di un cavo di
prolunga USB potrebbe impedire il corretto
funzionamento del lettore.
3. Riprodurre il disco.
4. Eseguire BD-Live in base alle
istruzioni presenti sul disco.
Non rimuovere il dispositivo di archiviazione USB o
scollegare il cavo di alimentazione durante il
funzionamento di BD-Live.
Per quanto riguarda il metodo di riproduzione dei
contenuti di BD-Live ecc., eseguire le operazioni in
base alle istruzioni presenti nel manuale del Blu-ray
Disc.
Per usufruire delle funzioni di BD-Live, eseguire la
connessione di rete (p. 14) e le impostazioni di rete
(p. 31).
Consultare la sezione “Connessione BD-Live”
(p. 32) per l’impostazione dell’accesso limitato ai
contenuti BD-Live.
Il tempo richiesto per scaricare i programmi forniti
nel dispositivo di archiviazione USB connesso al
lettore varia a seconda della velocità di connessione a
Internet e al volume dati dei programmi.
I programmi BD-Live forniti tramite Internet
potrebbero non essere in grado di visualizzare la
connessione a seconda dello stato (aggiornamento)
del provider. In tali casi, espellere il disco e
riprovare.
Se la schermata BD-Live non appare dopo aver
selezionato la funzione BD-Live nel menu del Blu-
ray Disc, il dispositivo di archiviazione USB
potrebbe non avere spazio sufficiente. In tali casi,
espellere il disco dal lettore, quindi cancellare i dati
contenuti nel dispositivo di archiviazione USB
utilizzando il menu “Formato” nell’“Archivio
locale” (p. 30).
Note
Video principale Video secondario
Note
Note
27 It
Impostazioni
4
Italiano
IMPOSTAZIONI
Il Menu SETUP abilita varie impostazioni e regolazioni audio/visive per le funzioni utilizzando il telecomando.
Menu SETUP
Menu/Menu secondario Voce Funzione Pagina
Impostazione
Generale
Sistema Standby automatico Attiva/disattiva la funzione di risparmio energetico. 30
Controllo HDMI Imposta la ricezione del segnale di comando del lettore dal
telecomando del proprio TV o del proprio ricevitore AV.
30
Caricare le
impostazioni
predefinite
Ripristina tutte le impostazioni ai valori di fabbrica ad
eccezione dell’impostazione Sicurezza 30
Aggiornamento Esegue l’aggiornamento del lettore. 30
Notifica
aggiornamento
Seleziona se visualizzare o meno il messaggio a schermo
quanto il lettore rileva nuovo software su Internet.
30
Messaggio di
riproduzione in 3D
Quando il lettore viene acceso, visualizza un messaggio di
avviso riguardante la riproduzione di video 3D.
30
Archivio locale Visualizza lo spazio libero sul dispositivo di archiviazione
USB collegato al lettore oppure formatta la cartella “BUDA”
sul dispositivo di archiviazione.
30
Installazione rapida Imposta lingua, risoluzione, rapporto di aspetto dello
schermo.
30
Lingua OSD Seleziona la lingua per l’On Screen Display. 30
Menu Imposta la lingua prioritaria per il menu disco. 31
Audio Imposta la lingua prioritaria per l’audio. 31
Sottotitolo Imposta la lingua prioritaria per i sottotitoli. 31
Riproduzione Auto Riproduzione
disco
Imposta la riproduzione automatica del disco al momento del
suo inserimento nel lettore.
31
Segno Angolo Imposta la visualizzazione del Segno Angolo quando viene
riprodotto un Blu-ray Disc/DVD con angolazioni multiple.
31
Segno PIP Imposta la visualizzazione del Segno PIP quando viene
riprodotto un Blu-ray Disc/DVD con Picture in Picture.
31
Simbolo audio
secondario
Imposta la visualizzazione del Simbolo audio secondario
quando viene riprodotto un Blu-ray Disc/DVD con audio
secondario.
31
Ultimo salvataggio
Imposta il lettore in modo da memorizzare la posizione dell’ultima
riproduzione di un disco (Blu-ray o DVD-Video) quando è
impostato in modalità Standby o si apre il vassoio del disco.
31
DivX(R) VOD DRM
Visualizza il codice di registrazione per i video DivX(R). 31
Sottotitoli Divx®
Seleziona se visualizzare o meno i sottotitoli per un video DivX(R).
31
Sicurezza Cambiare password Cambia la password per Parental Control e Codice del paese. 31
Parental Control Imposta il Parental Control a seconda dei contenuti del disco. 31
Codice del paese Imposta il proprio Codice del paese. 31
Rete Impostazione
connessione
Imposta un metodo di connessione alla rete.
31
Informazioni Visualizza la schermata delle informazioni sulla rete. 32
Prova connessione Esegue la prova di connessione alla rete. 32
Impostazioni IP Regola l’impostazione IP su Auto/Manuale. 32
Impostazione Proxy Regola l’impostazione Proxy. 32
Controllo Network Imposta il controllo dei dispositivi collegati tramite Ethernet
su Acceso/Spento.
32
Network Standby
Seleziona se il lettore può essere acceso da altri dispositivi di rete.
32
Controllo DMC Seleziona se consentire a DMC (Digital Media Controller)
compatibili DLNA (p. 15) di controllare il lettore.
32
Connessione
BD-Live
Imposta la connessione Internet su Permesso
parzialePermesso/Vietato.
32
28 It
Menu SETUP
Impostazione
Display
TV Uscita 3D Seleziona i video 3D o 2D. 32
Teleschermo Imposta il rapporto di aspetto dello schermo del TV collegato
e regola l’uscita video.
32
Risoluzione HDMI Seleziona la risoluzione di uscita video HDMI. 33
Sistema TV Seleziona il Sistema TV tra NTSC/PAL/Multi. 33
Spazio colorato Seleziona lo Spazio colore YCbCr 4:4:4/YCbCr 4:2:2/Full
RGB/RGB.
33
HDMI Deep Color Seleziona l’HDMI Deep Color tra 30 bit/36 bit/48 bit/spento. 33
HDMI 1080p 24Hz Attiva/disattiva HDMI 1080p 24Hz. 33
Video Process Riduzione del
rumore
Imposta il livello di Riduzione del rumore.
33
Modalità
deinterlacciamento
Imposta il metodo di rilevamento del segnale video.
33
Closed Caption Attributo CC Imposta l’aspetto dei sottotitoli per non udenti. 33
Colore Font
Dimensione Font
Stile Font
Opacità Font
Font edge
Colore Font edge
Colore BG
Opacità BG
Colore finestra
Opacità finestra
Personalizza carattere, sfondo e finestra utilizzati per i
sottotitoli per non udenti quando Attributo CC è impostato su
Custom.
33
Impostazione
Audio
Uscita audio Coassiale / Ottico Seleziona la modalità di uscita della presa COAXIAL/del
terminale OPTICAL tra BitstreamPCM/Ricodifica/Spento.
34
HDMI Seleziona la modalità di uscita del terminale HDMI tra
Bitstream/PCM/Ricodifica/Spento.
34
Downsampling Seleziona la frequenza di sotto-campionamento (Down
Sampling) del segnale audio digitale tra 48K/96K/192K.
34
DRC Imposta DRC (Dynamic Range Compression, Compressione
di gamma dinamica).
34
Uscita SACD SACD Priority Seleziona la priorità di riproduzione per i contenuti a 2 canali
o multi-canale quando il disco contiene entrambi i tipi di
contenuto.
34
SACD/CD Seleziona lo strato da riprodurre di un disco ibrido SA-CD/
CD.
34
Impostazione
diffusori
Downmix 2 canali Imposta l’uscita audio dalla presa AUDIO OUT L/R.
34
Post Process Upmix Trasmettere in modalità multicanale il segnale audio a 2
canali.
34
Informazioni di
sistema
Visualizza la versione del software e l’indirizzo MAC
(p. 42).
34
Menu/Menu secondario Voce Funzione Pagina
29 It
Menu SETUP
Impostazioni
4
Italiano
Esempio di funzionamento del
menu SETUP
È necessario richiamare la schermata del menu SETUP
per eseguire le regolazioni sul lettore. Quella che segue è
la spiegazione per il funzionamento di base del menu
SETUP.
Esempio: Impostazione Auto Riproduzione disco
Non è possibile impostare alcune voci durante la
riproduzione. In questo caso, premere per
arrestare completamente la riproduzione prima di
iniziare le impostazioni.
1. Visualizzare la schermata del
menu SETUP.
Premere SETUP per visualizzare la schermata del
menu SETUP.
Premere 2/3 per selezionare Impostazione
Generale, quindi premere ENTER o a.
2. Selezionare un sottomenu.
Premere 5/a per selezionare Riproduzione, quindi
premere ENTER o il tasto cursore 3.
3. Selezionare una voce del menu.
Premere 5/a per selezionare Auto Riproduzione
disco, quindi premere ENTER o il tasto cursore 3.
4. Selezionare un’impostazione
desiderata.
Premere 5/a per selezionare Acceso o Spento,
quindi premere ENTER.
Per immettere i numeri per alcune voci di menu
(p.es. le password), utilizzare i tasti numerici.
5. Uscire dalla schermata del menu.
Premere 2 per tornare al menu precedente.
Nota
REPEAT A/B
AUDIO
SUBTITTLE
ANGLE
SEARCH
MIRACAST
CLEAR
PIP
HOME
2ND
AUDIO
ENTER
TOP MENU
RETURN ON SCREEN
POP-UP MENU
SETUP
STATUSSETUP
Suggerimento
30 It
Menu SETUP
Impostazione Generale
Le impostazioni predefinite sono contrassegnate con “
*
”.
Sistema
Standby automatico
Attiva/disattiva la funzione di risparmio energetico.
Se è impostato su Acceso, il lettore passerà alla modalità
screen saver se non avverranno operazioni per 5 minuti.
Dopodiché, il lettore passerà alla modalità Standby se non
avverranno operazioni per 15 minuti.
Acceso
*
, Spento
Controllo HDMI
È possibile impostare il lettore per ricevere il segnale di
comando proveniente da un TV o da un ricevitore AV
compatibile con la funzione di Controllo HDMI attraverso
un cavo HDMI (p. 11).
Acceso, Spento
*
Caricare le impostazioni predefinite
È possibile azzerare tutte le impostazioni del lettore ai
valori di fabbrica ad eccezione dell’impostazione
Sicurezza (p. 31). Per dettagli sulle impostazioni
predefinite, vedere le pagine 27–34.
Aggiornamento
È possibile aggiornare il software manualmente tramite
Archiviazione su chiave USB o Rete. Per dettagli
sull’aggiornamento del software, consultare la sezione
“Aggiornamento del software” (p. 37).
Notifica aggiornamento
È possibile selezionare se visualizzare o meno il
messaggio a schermo quanto il lettore rileva nuovo
software su Internet.
Acceso
*
, Spento
Messaggio di riproduzione in 3D
È possibile attivare o disattivare il messaggio di avviso
riguardante la riproduzione 3D che appare sul TV quando
si accende il lettore.
Acceso
*
, Spento
Archivio locale
È possibile visualizzare lo spazio libero sul dispositivo di
archiviazione USB collegato al lettore oppure formattare
(svuotare) la cartella “BUDA” sul dispositivo di
archiviazione selezionando Formato.
Per utilizzare la funzione BD-Live (p. 26), collegare
un dispositivo di archiviazione USB con almeno
2GB di spazio libero a uno dei connettori USB
(fronte/retro) del lettore per utilizzare il dispositivo
di archiviazione come Archivio locale.
Installazione rapida
L’utente può eseguire l’Installazione rapida (p. 18).
Lingua
OSD
È possibile selezionare la lingua dell’On Screen Display
che rappresenta i messaggi o il menu visualizzati sullo
schermo quali il menu SETUP.
English, Français, Español, Deutsch, Italiano, Svenska,
Nederlandse, Polski, Русский, 中文
Utilizzare la funzione Controllo HDMI
Utilizzando la funzione Controllo HDMI, è possibile far
funzionare il lettore in modo interattivo con il proprio
TV (con il supporto della funzione Controllo HDMI).
Se si collega il lettore a un TV compatibile con la funzione
Controllo HDMI utilizzando un cavo HDMI e impostando
Controllo HDMI nel menu SETUP su Acceso (p. 30), è
possibile eseguire le funzioni elencate qui di seguito.
Funzione di selezione automatica dell’ingresso
Quando si inizia la riproduzione del lettore, il selettore
d’ingresso del TV (e di un ricevitore AV se il lettore è
collegato al TV tramite ricevitore AV) verrà commutato
automaticamente al lettore. L’accensione del TV avviene
automaticamente a seconda del tipo di apparecchio TV.
Funzione di disattivazione automatica
Se si spegne il TV mentre il lettore è in modalità di arresto
e la schermata del menu SETUP non è visualizzata, anche
il lettore verrà automaticamente spento.
La funzione Controllo HDMI potrebbe non
funzionare correttamente a seconda del tipo di TV.
Funzioni diverse rispetto a quelle elencate in
precedenza potrebbero funzionare a seconda del
tipo di TV o di ricevitore AV.
Per poter rendere disponibile la funzione
Controllo HDMI, regolare le impostazioni della
funzione Controllo HDMI su TUTTI i componenti
(il lettore, il TV e il ricevitore AV). Potrebbero
essere necessarie anche altre operazioni.
È possibile attivare e disattivare ogni funzione in
modo indipendente a seconda del tipo di TV.
Consultare il manuale di istruzioni in dotazione
con il TV e/o il ricevitore AV per ulteriori dettagli
riguardanti le impostazioni.
Se attivato, il consumo energetico durante la
modalità Standby aumenta a causa della funzione
Controllo HDMI.
Note
Suggerimento
31 It
Menu SETUP
Impostazioni
4
Italiano
Menu
È possibile impostare la lingua prioritaria per il menu disco.
English, Français, 中文 , Español, Deutsch, Italiano,
Nederlandse, Portoghese, Danese, Svenska, Finlandese,
Norvegese, Polski, Русский, Coreano, Giapponese, Altro
Audio
È possibile impostare la lingua prioritaria dell’audio per la
riproduzione del Blu-ray Disc/DVD. Per dettagli sulle
voci di impostazione, vedere “Menu” (p. 31).
Sottotitolo
È possibile impostare la lingua prioritaria per i sottotitoli.
English, Français,
中文
, Español, Deutsch, Italiano,
Nederlandse, Portoghese, Danese, Svenska, Finlandese,
Norvegese, Polski,
Русский
, Coreano, Giapponese, Altro, Spento
(Le impostazioni predefinite in [Lingua] differiscono a
seconda del modello.)
Riproduzione
Auto Riproduzione disco
È possibile attivare/disattivare l’Auto Riproduzione disco.
Se è impostato su Acceso, dopo il caricamento avverrà la
riproduzione automatica del disco.
Acceso
*
, Spento
Segno Angolo
Imposta la visualizzazione del Segno Angolo ( )
quando viene riprodotto un Blu-ray Disc/DVD con
angolazioni multiple.
Acceso
*
, Spento
Segno PIP
È possibile impostare la visualizzazione del Segno PIP
( ) quando viene riprodotto un Blu-ray Disc con la
funzione Picture in Picture (p. 26).
Acceso
*
, Spento
Simbolo audio secondario
È possibile impostare la visualizzazione del Simbolo
audio secondario ( ) quando viene riprodotto un Blu-
ray Disc con audio secondario.
Acceso
*
, Spento
Ultimo salvataggio
È possibile impostare il lettore in modo da memorizzare la
posizione dell’ultima riproduzione di un disco (Blu-ray
Disc o DVD Video) quando è impostato in modalità
Standby o si apre il vassoio del disco.
Acceso
*
, Spento
Alcuni dischi non sono compatibili con questa
funzione.
DivX(R) VOD DRM
È possibile visualizzare il codice di registrazione per i
video DivX(R).
Sottotitoli Divx®
È possibile selezionare se visualizzare o meno i sottotitoli
per un video DivX(R).
Acceso, Spento
*
Sicurezza
Cambiare password
È possibile impostare la password per modificare il livello
di Parental Control e il Codice del paese . Consultare la
sezione “Parental Control” (p. 31) e “Codice del paese”
(p. 31).
La password predefinita è 0000.
Se si dimentica la password, consultare “Risoluzione
dei problemi” (p. 38) e portare tutte le impostazioni
di Sicurezza sui valori predefiniti.
Parental Control
In alcuni dischi Blu-ray Disc/DVD, è impostato un livello
di controllo per la visione del disco in base all’età dello
spettatore. È possibile impostare il Parental Control
mostrato sullo schermo a seconda dei contenuti del disco.
La password (vedere “Cambiare password” a p. 31) va
immessa prima di impostare i livelli del Parental Control.
Dopo aver impostato il Parental Control, se viene
riprodotto un disco che presenta un livello di Parental
Control maggiore rispetto al livello corrente, oppure se si
desidera modificare il livello del Parental Control, verrà
visualizzata una finestra di dialogo a comparsa che
richiederà l’immissione della password.
Spento*, 1–8
Codice del paese
È possibile impostare il Codice del paese in cui si vive. La
password (vedere “Cambiare password” a p. 31) va
immessa prima di impostare il Codice del paese. Questa
impostazione è utilizzabile per classificare il Parental
Control e la riproduzione del disco.
Rete
Impostazione connessione
È possibile selezionare un metodo di connessione alla rete.
Nota
Note
Collegato via
cavo*
Collega la rete tramite Ethernet.
Wireless Collega la rete tramite una LAN wireless.
È possibile selezionare le impostazioni per una
connessione LAN wireless. Attenersi alle istruzioni a
schermo per procedere.
Ricerca
Cerca un punto di accesso. È possibile collegare il
punto di accesso trovato.
Manuale
È possibile impostare manualmente un punto di
accesso.
Auto
Se il router (punto di accesso) supporta la funzione
WPS (Impostazione Wi-Fi protetta), è possibile
utilizzare il metodo d’impostazione automatica per
collegare il lettore al punto di accesso senza dover
immettere manualmente le informazioni di rete.
Selezionare il metodo PBC (Push Button
Configuration) oppure PIN code e seguire i messaggi
a schermo.
32 It
Menu SETUP
Informazioni
È possibile visualizzare la schermata delle informazioni
sulla rete. In questa schermata, è possibile visualizzare le
informazioni di Interfaccia (Ethernet), Tipo di indirizzo,
Indirizzo IP, Subnet Mask, Gateway predefinito e DNS.
Prova connessione
È possibile eseguire un test della connessione Internet. Se
la prova non va a buon fine, verificare le “Impostazioni
IP” (p. 32) e quindi eseguire nuovamente la prova.
Impostazioni IP
È possibile configurare le impostazioni di rete.
Numeric keys Inseriscono i caratteri.
2/3 Sposta la selezione.
CLEAR Cancella un carattere.
ENTER
Salva le impostazioni ed esce dal menu.
Impostazione Proxy
È possibile regolare l’Impostazione Proxy. Impostare su
Disattivare per l’uso normale. Impostare su Attivare per
attivare l’impostazione proxy.
Controllo Network
Imposta il controllo dei dispositivi collegati tramite Ethernet
su Acceso/Spento. Se Attivo con filtro è selezionato, è
possibile specificare gli indirizzi MAC dei dispositivi di rete
che avranno diritto d’accesso al lettore. Questo lettore
utilizza il Yamaha Network Control protocol (YNC).
Acceso
*
, Attivo con filtro, Spento
Se è attivato Controllo Network, il consumo
energetico durante la modalità Standby aumenta a
causa della funzione di controllo di rete.
Se impostato su Acceso, il tempo di avvio del
sistema diminuisce.
Network Standby
È possibile selezionare se il lettore può essere acceso da
altri dispositivi di rete come per esempio un “AV
CONTROLLER” (p. 22).
Acceso, Spento
*
Questa impostazione è disponibile solo quando
Controllo Network è attivato.
Controllo DMC
È possibile selezionare se consentire a DMC compatibili
DLNA (p. 15) di controllare il lettore.
Attivare
*
, Disattivare
Connessione BD-Live
È possibile impostare le restrizioni di accesso ai contenuti
BD-Live.
Impostazione Display
Le impostazioni predefinite sono contrassegnate con “
*
”.
TV
Uscita 3D
È possibile selezionare l’uscita video 3D o 2D per il lettore.
Pur impostando “Uscita 3D” su “Auto” e
riproducendo un disco Blu-ray 3D, il lettore
seleziona le immagini 2D a seconda delle
impostazioni del TV ecc.
Teleschermo
È possibile impostare il rapporto di aspetto del TV
collegato e regolare l’uscita video.
Se si cambia il TV (ad es. per l’acquisto di uno nuovo) e il
rapporto di aspetto dello schermo del TV collegato cambia,
sarà necessario cambiare l’impostazione Teleschermo.
Auto*
Selezionare per configurare automaticamente le
impostazioni di rete di questo lettore con il server DHCP.
Manuale Selezionare per configurare manualmente le
impostazioni di rete (Indirizzo IP, Subnet Mask,
Gateway predefinito, e DNS).
Suggerimenti
Disattivare
*
Imposta il server Proxy su Disattivato. Selezionare
questa voce quando il server Proxy non viene utilizzato.
Attivare Attiva le impostazioni Proxy Host e Proxy Port.
Proxy Host Imposta il Proxy Host.
Proxy Port Imposta la Proxy Port.
Note
Nota
Permesso
Consente la connessione alla rete a tutti i dischi BD-Live.
Permesso
parziale
*
Consente l’accesso solo ai dischi con la
certificazione del produttore.
Vietato Vieta la connessione alla rete a tutti i dischi BD-Live.
Auto*
Questo lettore seleziona automaticamente i video 3D o 2D.
Spento Questo lettore seleziona sempre i video 2D.
Nota
16:9 Intero Selezionare questa impostazione quando il lettore
viene collegato a un TV con schermo 16:9. Quando
viene riprodotto un video con rapporto di aspetto 4:3,
viene visualizzato come illustrato qui di seguito.
16:9 Normale
*
Selezionare questa impostazione quando il lettore
viene collegato a un TV con schermo 16:9. Quando
viene riprodotto un video con rapporto di aspetto 4:3,
viene visualizzato come illustrato qui di seguito.
4:3 Pan Scan Selezionare questa impostazione quando il lettore
viene collegato a un TV con schermo 4:3. Quando
viene riprodotto un video con rapporto di aspetto 16:9,
viene visualizzato come illustrato qui di seguito.
4:3 Letter BoxSelezionare questa impostazione quando il lettore
viene collegato a un TV con schermo 4:3. Quando
viene riprodotto un video con rapporto di aspetto 16:9,
viene visualizzato come illustrato qui di seguito.
Dimensioni originali
dell’immagine
Su TV 16:9 (wide screen)
16:9 Intero 16:9 Normale
4:3
Dimensioni originali
dell’immagine
Su TV 4:3
4:3 Pan Scan 4:3 Letter Box
16:9
33 It
Menu SETUP
Impostazioni
4
Italiano
Risoluzione HDMI
È possibile selezionare la risoluzione di uscita video
HDMI. Per ulteriori dettagli sui formati di uscita,
consultare la sezione “Informazioni sui formati di uscita
video HDMI” (p. 36).
Se impostata su Auto, la risoluzione viene impostata
automaticamente alla risoluzione massima del TV
collegato.
Se è impostato Disco nativo, vengono utilizzate la
risoluzione originale e la frequenza video registrate nel
Blu-ray Disc o DVD in riproduzione. È possibile
utilizzare la funzione di conversione up video di un
dispositivo esterno.
Quando viene riprodotta una sorgente diversa da un Blu-
ray Disc o un DVD, la risoluzione e la frequenza video
funzioneranno come Auto.
Se si cerca di riprodurre un Blu-ray Disc o un DVD la cui
risoluzione e la cui frequenza video non sono compatibili
con il TV collegato, non verrà trasmessa alcuna
immagine. In tal caso, interrompere la riproduzione e
selezionare un’opzione diversa da Disco nativo.
Auto
*
, Disco nativo, 480i/576i, 480p/576p, 720p, 1080i,
1080p
Per emettere audio in alta definizione (per esempio
Dolby TrueHD o DTS-HD Master Audio) dal
terminale , impostare Risoluzione HDMI su Auto o
su un valore superiore a 720p.
Sistema TV
È possibile selezionare Sistema TV tra PAL, NTSC e
Multi. Impostare lo stesso Sistema TV che è impostato nel
TV. Per ulteriori dettagli sui formati di uscita, consultare
la sezione “Informazioni sui formati di uscita video
HDMI” (p. 36).
Spazio colorato
È possibile selezionare l’uscita Spazio colore (p. 41) da
HDMI Questa funzione è disponibile quando il lettore è
collegato con un cavo HDMI.
Questa funzione è disponibile solo su TV che
supportano tale funzione.
HDMI Deep Color
Se il proprio TV e/o il ricevitore AV è compatibile con
Deep Color (p. 41), impostare questa voce in base al
proprio TV/ricevitore AV. Questa funzione è disponibile
quando il lettore è collegato con un cavo HDMI.
30 bits, 36 bits, 48 bits, Spento
*
HDMI 1080p 24Hz
Questa impostazione trasmette il BD video codificato in
frame rate 24Hz in HDMI 1080p 24Hz. Con questa
funzione potrebbe essere disponibile una riproduzione
video più scorrevole. Questa funzione è disponibile solo
su TV/ricevitori AV che supportano tale funzione. Per
ulteriori dettagli sui formati di uscita, consultare la sezione
“Informazioni sui formati di uscita video HDMI” (p. 36).
Auto
*
, Spento
Questa impostazione è disattivata se la risoluzione di
uscita è diversa da 1080p.
Video Process
Riduzione del rumore
È possibile impostare Riduzione del rumore su un livello
da 0 a 3. 0 disattiva l’impostazione, mentre 3 è il livello
massimo.
0, 1, 2
*
, 3
Modalità deinterlacciamento
È possibile impostare il metodo di rilevamento del segnale
video. Impostare su Auto per l’uso normale. Se sullo
schermo compaiono disturbi a strisce orizzontali,
impostare su Film/Video per eliminare i disturbi.
Auto
*
, Film, Video
Closed Caption
Attributo CC
È possibile impostare l’aspetto dei sottotitoli per non
udenti. Se Auto è selezionato, i sottotitoli digitali per non
udenti appariranno nelle impostazioni predefinite. Se
Custom è selezionato, è possibile personalizzare l’aspetto
dei sottotitoli (Colore Font, Dimensione Font ecc.)
manualmente.
Auto, Custom
Colore Font, Dimensione Font, Stile Font,
Opacità Font, Font edge, Colore Font edge,
Colore BG, Opacità BG, Colore finestra,
Opacità finestra
Personalizza carattere, sfondo e finestra utilizzati per i
sottotitoli per non udenti quando Attributo CC è impostato
su Custom.
Nota
NTSC, PAL, Multi
(L’impostazione predefinita differisce a seconda del modello.)
YCbCr 4:4:4
*
Imposta lo Spazio colore su YCbCr 4:4:4.
YCbCr 4:2:2 Imposta lo Spazio colore su YCbCr 4:2:2.
Full RGB Se è impostata l’opzione RGB e i colori bianco e
nero a schermo sono troppo tenui, selezionare questa
voce. Questa impostazione è effettiva quando un
componente collegato supporta la gamma RGB 0–
255.
RGB Emette il segnale video alla gamma di segnale
normale.
Nota
Nota
34 It
Menu SETUP
Impostazione Audio
Le impostazioni predefinite sono contrassegnate con “
*
”.
Uscita audio
Coassiale / Ottico
È possibile selezionare la modalità di uscita della presa
COAXIAL e del terminale OPTICAL. Per ulteriori
dettagli sui formati di uscita, consultare la sezione
“Informazioni sui formati di uscita audio” (p. 35).
HDMI
È possibile selezionare la modalità di uscita del terminale
HDMI. Per dettagli sulle voci di impostazione, vedere
“Coassiale / Ottico” (p. 34). Per ulteriori dettagli sui formati
di uscita, consultare la sezione “Informazioni sui formati di
uscita audio” (p. 35).
Bitstream
*
, PCM, Ricodifica, Spento
Per emettere audio in alta definizione (per esempio
Dolby TrueHD o DTS-HD Master Audio) dal
terminale HDMI, impostare Risoluzione HDMI su
Auto o su un valore superiore a 720p (p. 33).
Downsampling
È possibile selezionare la frequenza di sotto-
campionamento (Down Sampling) del segnale audio
digitale. Questa funzione è efficace per l’uscita del
segnale audio dalla presa COAXIAL/dal terminale
OPTICAL.
DRC
È possibile impostare DRC (Dynamic Range
Compression, Compressione di gamma dinamica)
(p. 41) su Acceso/Spento/Auto. Se impostato su Auto,
DRC viene attivato automaticamente per una sorgente con
informazioni in formato Dolby TrueHD. DRC ottimizza
la qualità del suono, rendendo più chiare le conversazioni.
È utile principalmente quando si guardano film di notte.
Spento, Acceso, Auto
*
Uscita SACD
SACD Priority
Seleziona la priorità di riproduzione per i contenuti a 2
canali o multi-canale quando il disco contiene entrambi i
tipi di contenuto.
Multi-ch
*
, 2-ch
SACD/CD
Seleziona lo strato da riprodurre di un disco ibrido SA-
CD/CD.
SACD
*
, CD
L’indicatore SA-CD sul pannello anteriore si
illumina quando viene caricato un SA-CD e viene
selezionato lo strato SA-CD.
Questa impostazione è disponibile solo quando non è
caricato alcun disco.
I segnali audio non vengono emessi dalle prese di
uscita digitale COAXIAL o OPTICAL (p. 13)
quando è selezionato lo strato SA-CD.
Impostazione diffusori
Downmix 2 canali
È possibile selezionare il metodo di downmix analogico a
2 canali tra Stereo o Lt/Rt.
Post Process
Upmix
È possibile trasmettere il segnale audio a 2 canali in
modalità multicanale. Per trasmettere in modalità
multicanale, selezionare DTS NEO:6, quindi selezionare
la modalità Cinema o Musica.
Spento
*
, DTS NEO:6
Informazioni di sistema
Sono visualizzate la versione del software e l’indirizzo
MAC (p. 42).
Bitstream Fa uscire il segnale digitale senza alcuna
elaborazione. Non avviene l’uscita dell’Audio
secondario.
PCM Emette il PCM a 2 canali.
Ricodifica
*
Emette Bitstream con Audio secondario.
Spento Silenzia il suono.
Nota
48K
*
La frequenza di campionamento più alta dell’uscita
PCM digitale è 48 kHz.
96K La frequenza di campionamento più alta dell’uscita
PCM digitale è 96 kHz.
192K La frequenza di campionamento più alta dell’uscita
PCM digitale è 192 kHz.
Suggerimento
Note
Stereo
*
Imposta l’uscita sui canali stereo, trasmettendo
l’audio solo dai due altoparlanti anteriori.
Lt/Rt Selezionare questa voce se l’unità è collegata a un
decoder Dolby Pro Logic. L’audio emesso dagli
altoparlanti posteriori viene miscelato all’audio
stereo a 2 canali.
35 It
Menu SETUP
Impostazioni
4
Italiano
Informazioni sui formati di uscita audio
*1 “SA” sta per Audio secondario (Secondary Audio). “BCS” sta per suono di clic del tasto (Button Click Sound),
l’effetto sonoro per i menu a comparsa ecc.
*2 Per USB, DLNA e servizi di rete, PCM e 2 canali mixati non sono disponibili (audio disattivato).
*3 Per USB, DLNA e servizi di rete, Ricodifica non è disponibile (l’audio in uscita avrà lo stesso formato del bitstream).
Se Coassiale / Ottico o HDMI sono impostati su Bitstream, l’audio secondario non viene emesso. (p. 34)
Per emettere audio in alta definizione (per esempio Dolby TrueHD o DTS Master Audio) dal terminale HDMI,
impostare Risoluzione HDMI su Auto o su un valore superiore a 720p (p. 33).
Formati di uscita SA-CD
Formato sorgente
HDMI COAXIAL / OPTICAL MIXED 2CH
Bitstream PCM Ricodifica Bitstream PCM Ricodifica
PCM a 2
canali
con SA* o
BCS
*1
PCM a 2 canali Dolby Digital PCM a 2 canali Dolby Digital 2ch
senza SA* o
BCS
*1
PCM a 2 canali PCM a 2 canali 2ch
PCM a 2
canali
con SA* o
BCS
*1
PCM a 5.1 canali Dolby Digital PCM a 2 canali Dolby Digital 2ch
senza SA* o
BCS
*1
PCM a 5.1 canali PCM a 2 canali 2ch
PCM a 7.1
canali
con SA* o
BCS
*1
PCM a 7.1 canali Dolby Digital PCM a 2 canali Dolby Digital 2ch
senza SA* o
BCS
*1
PCM a 7.1 canali PCM a 2 canali 2ch
Dolby Digital
con SA* o
BCS
*1
Dolby Digital
PCM fino a
5.1 canali
Dolby Digital Dolby Digital
PCM a 2
canali
Dolby Digital 2ch
senza SA
o
BCS
*1
Dolby Digital
Plus
con SA* o
BCS
*1
Dolby Digital
Plus
PCM fino a
7.1 canali
Dolby Digital
Dolby Digital
PCM a 2
canali
Dolby Digital 2ch
senza SA
o
BCS
*1
Dolby Digital
Plus
Dolby
TrueHD
con SA* o
BCS
*1
Dolby
TrueHD
PCM fino a
7.1 canali
Dolby Digital
Dolby Digital
PCM a 2
canali
Dolby Digital 2ch
senza SA
o
BCS
*1
Dolby
TrueHD
DTS
con SA* o
BCS
*1
DTS
PCM fino a
5.1 canali
*2
DTS
*3
DTS
PCM a 2
canali
*2
DTS
*3
2 canali
*2
senza SA
o
BCS
*1
DTS HD High
Resolution
con SA* o
BCS
*1
DTS-HD High
Resolution
PCM fino a
7.1 canali
*2
DTS
*3
DTS
PCM a 2
canali
*2
DTS
*3
2 canali
*2
senza SA
o
BCS
*1
DTS HD High
Resolution
*3
DTS-HD
Master Audio
con SA* o
BCS
*1
DTS-HD
Master Audio
PCM fino a
7.1 canali
*2
DTS
*3
DTS
PCM a 2
canali
*2
DTS
*3
2 canali
*2
senza SA
o
BCS
*1
DTS-HD
Master
Audio
*3
Note
Impostazione SACD Priority
(p. 34)
HDMI COAXIAL / OPTICAL
MIXED 2CH
Multi-ch PCM fino a 5.1 canali Nessuna uscita 2ch
2-ch PCM fino a 2 canali Nessuna uscita 2ch
36 It
Menu SETUP
Informazioni sui formati di uscita video HDMI
Se Sistema TV è impostato su NTSC
Se Sistema TV è impostato su PAL
*1 L’impostazione della risoluzione sarà quella massima supportata dal TV collegato. Per esempio, se la risoluzione
massima supportata dal TV collegato è 1080p, la risoluzione sarà impostata su 1080p.
*2 La risoluzione e la frequenza saranno quelle del disco sorgente.
*3 Se Auto è impostato per HDMI 1080p 24Hz e il TV collegato supporta la risoluzione 1080p 24Hz, la risoluzione sarà
impostata su 1080p 24 Hz invece che su 1080p 50/60 Hz.
Se Sistema TV è impostato su Multi
Se Sistema TV è impostato su Multi, il segnale video viene emesso alla stessa frequenza della sorgente. Vedere le tabelle
sopra per dettagli sull’impostazione di frequenza del TV e sulla risoluzione del segnale video in uscita.
L’impostazione HDMI 1080p 24Hz è disattivata se la risoluzione di uscita è diversa da 1080p.
Se Sistema TV è impostato su NTSC e la sorgente video non è 60 Hz, il segnale video in uscita viene convertito a
60 Hz.
Se Sistema TV è impostato su PAL e la sorgente video non è 50 Hz, il segnale video in uscita viene convertito a
50 Hz.
Sommario
Risoluzione HDMI
Auto Disco nativo 1080p 1080i 720p 480p/576p 480i/576i
BD-Video con
contenuto 1080p/24Hz
*
1
1080p 24Hz
1080p 24Hz/
60Hz
*3
1080i 60Hz 720p 60Hz 480p 480i
BD-Video senza
contenuto 1080p/24Hz
*
1
*
2
1080p 60Hz 1080i 60Hz 720p 60Hz 480p 480i
DVD-Video
*
1
*
2
1080p 60Hz 1080i 60Hz 720p 60Hz 480p 480i
Altri
*
1
*
1
1080p 60Hz 1080i 60Hz 720p 60Hz 480p 480i
Sommario
Risoluzione HDMI
Auto Disco nativo 1080p 1080i 720p 480p/576p 480i/576i
BD-Video con
contenuto 1080p/24Hz
*
1
1080p 24Hz
1080p 24Hz/
50Hz
*3
1080i 50Hz 720p 50Hz 576p 576i
BD-Video senza
contenuto 1080p/24Hz
*
1
*
2
1080p 50Hz 1080i 50Hz 720p 50Hz 576p 576i
DVD-Video
*
1
*
2
1080p 50Hz 1080i 50Hz 720p 50Hz 576p 576i
Altri
*
1
*
1
1080p 50Hz 1080i 50Hz 720p 50Hz 576p 576i
Note
37 It
Impostazioni
4
Italiano
Quando necessario, verrà rilasciato nuovo software con ulteriori funzioni o miglioramenti al prodotto. Consigliamo di
aggiornare periodicamente il software del lettore all’ultima versione.
Per verificare la disponibilità di aggiornamenti per il software, visitare
http://download.yamaha.com/
Durante l’esecuzione dell’aggiornamento del software, non rimuovere il dispositivo di archiviazione USB, non
impostare il lettore in modalità Standby e non scollegare il cavo di alimentazione/cavo LAN.
Aggiornamento del software
1. Preparazione per l’aggiornamento
del software.
Se si aggiorna il software tramite Archiviazione su
chiave USB:
1 Salvare il pacchetto dei file di aggiornamento
nella apposita cartella presente sul dispositivo di
archiviazione USB. Per maggiori dettagli,
consultare la documentazione sulla procedura
allegata al pacchetto dei file di aggiornamento.
2 Collegare il dispositivo di archiviazione USB.
Se si aggiorna il software via rete.
accertarsi che il lettore sia collegato alla rete.
2. Selezionare il metodo di
aggiornamento, quindi avviare
l’aggiornamento dal menu SETUP.
1 Premere SETUP per visualizzare la schermata
del menu SETUP.
2 Selezionare Impostazione Generale = Sistema
= Aggiornamento.
3 Selezionare la voce contenente il pacchetto dei
file di aggiornamento dall’Archiviazione su
chiave USB/Rete.
Il sistema cercherà il pacchetto dei file di
aggiornamento.
3. Aggiornare il software attenendosi
ai messaggi visualizzati sullo
schermo.
L’aggiornamento è completato. Il sistema sarà
ripristinato.
Aggiornamento del software
Nota
38 It
INFORMAZIONI AGGIUNTIVE
Consultare la tabella qui di seguito nel caso il lettore non funzioni correttamente. Se il problema riscontrato non risultasse
elencato qui di seguito o se le istruzioni fornite non fossero d’aiuto, spegnere il lettore, scollegare il cavo di
alimentazione e contattare il più vicino rivenditore o centro di assistenza Yamaha autorizzato.
Alimentazione
Funzionamento di base
Riproduzione disco
Risoluzione dei problemi
Problema Possibili cause e soluzioni
Nessuna alimentazione. Collegare correttamente il cavo di alimentazione CA.
Premere p sul pannello anteriore per attivare l’alimentazione.
L’alimentazione del lettore si spegne. Il lettore si spegnerà automaticamente dopo 20 minuti d’inattività (assenza di
riproduzione) quando è attivo lo Standby automatico (p. 30).
Problema Possibili cause e soluzioni
Il telecomando non funziona. Usare il telecomando nei limiti del suo campo d’azione. (p. 10)
Sostituire le batterie. (p. 10)
Controllare gli ID impostati per l’unità principale e il telecomando. L’ID del
telecomando sull’unità principale potrebbe cambiare dopo il ripristino dell’unità
principale. In questo caso, controllare l’ID del telecomando sull’unità principale e, se
necessario, impostarlo nuovamente. (p. 10)
I tasti non funzionano.
Tenere premuto p sul pannello anteriore per più di 5 secondi e rilasciarlo per
ripristinare il lettore.
Per azzerare completamente il lettore, scollegare il cavo di alimentazione dalla presa
CA per almeno 30 secondi, collegare nuovamente il cavo di alimentazione alla presa
CA e quindi riaccendere il lettore.
La password è stata dimenticata.
Tenere premuti simultaneamente , e sul pannello anteriore quando non è
inserito alcun disco e la riproduzione è arrestata per riportare tutte le impostazioni,
comprese le impostazioni di Sicurezza (p. 31) del lettore, ai loro valori predefiniti. Una
volta disattivata automaticamente l’alimentazione, premere p per riaccendere
nuovamente il lettore.
Problema Possibili cause e soluzioni
Il lettore non riesce a riprodurre il disco. Estrarre il disco e pulirlo. (p. 5)
Accertarsi che il disco sia stato caricato correttamente (allineato nel vassoio del disco
con l’etichetta rivolta verso l’alto). (p. 5)
Utilizzare un disco supportato dal lettore. (p. 3)
Rimuovere il disco e quindi controllare se il lettore lo supporta o meno. (p. 3)
Controllare il codice regionale. (p. 3)
Controllare se il disco è difettoso tentando con un altro disco.
Il CD-R/RW, DVD+R/RW/R DL e il DVD-R/RW/R DL devono essere finalizzati.
(p. 3)
Il video si interrompe. Il lettore si arresta se rileva scosse o vibrazioni.
Il lettore emette un suono di scatto
quando si inizia la riproduzione o il
caricamento del disco.
Questi suoni non indicano un malfunzionamento del lettore, ma sono normali
condizioni di funzionamento.
Per avviare la riproduzione di un Blu-ray
Disc sono necessari alcuni istanti.
Quando viene caricato un Blu-ray Disc, questo lettore cerca un dispositivo di
archiviazione USB utilizzato come Archivio locale per la funzione BD-Live (p. 26). Per
ridurre il tempo di attesa, mantenere connesso un dispositivo di archiviazione USB a
uno dei connettori USB (fronte/retro) del lettore (p. 16).
39 It
Risoluzione dei problemi
Informazioni aggiuntive
5
Italiano
Immagine
Suono
Rete
Problema Possibili cause e soluzioni
Nessuna immagine. Accertarsi che i cavi siano stati collegati correttamente. (p. 11)
Accertarsi che il TV o il ricevitore AV collegato sia impostato sull’ingresso corretto.
Senza nessun disco inserito, o con la riproduzione interrotta, tenere premuto
contemporaneamente e sul pannello anteriore per impostare la risoluzione
video sui valori predefiniti.
Se ciononostante non viene visualizzata alcuna immagine, tenere premuto per circa
5 secondi sul pannello anteriore per passare da NTSC a PAL e viceversa.
Se è impostato Disco nativo, viene emesso un segnale non compatibile con il TV
collegato. Modificare l’impostazione per emettere un segnale compatibile con il TV
collegato. (p. 33)
Accertarsi che il disco o il file che si sta tentando di riprodurre sia compatibile con
questo lettore (p. 3).
Lo schermo si blocca e i tasti operativi
non funzionano.
Premere , quindi riavviare la riproduzione.
Spegnere il lettore e quindi riaccenderlo.
Tenere premuto p sul pannello anteriore per più di 5 secondi e rilasciarlo per
ripristinare il lettore.
Il video non viene emesso con la
risoluzione desiderata.
Impostare la risoluzione desiderata. (p. 33)
Il video wide-screen appare allungato
verticalmente o appaiono delle bande
nere sopra o sotto lo schermo. Oppure il
video 4:3 appare allungato
orizzontalmente.
Modificare il rapporto di aspetto del proprio TV. (p. 32)
Sullo schermo appaiono immagini di
disturbo quadrate (mosaici).
Immagini in blocchi possono essere visibili nelle scene con movimento rapido a causa
delle caratteristiche della tecnologia di compressione dell’immagine digitale.
Problema Possibili cause e soluzioni
Non viene emesso alcun suono o
vengono emessi suoni distorti.
Controllare che il cavo audio sia collegato correttamente. (p. 11)
Aumentare il volume del TV o del ricevitore AV.
Non c’è suono durante un fermo immagine, durante l’avanzamento rapido e la
riproduzione rapida al contrario. (p. 9)
L’audio potrebbe non essere emesso a seconda dello stato di registrazione dell’audio,
come quando viene registrato come contenuto audio un tipo di audio diverso da un
segnale audio oppure audio non in formato standard. (p. 3)
Accertarsi che il disco o il file che si sta tentando di riprodurre sia compatibile con
questo lettore (p. 3).
I canali sinistro e destro dell’audio sono
invertiti o il suono proviene solo da un
lato.
Verificare i collegamenti audio. (p. 13)
Non si riesce a sentire il tipo di audio e/o
il numero dei canali desiderati.
Consultare l’impostazione Uscita audio e “Informazioni sui formati di uscita audio”.
(p. 34, p. 35)
Impossibile sentire il suono del PIP
(audio secondario).
Impostare Coassiale / Ottico o HDMI su PCM/ricodifica. (p. 34)
Per ascoltare l’audio secondario, premere 2ND AUDIO. (p. 8)
A seconda del disco, potrebbe essere necessario impostare l’audio secondario nel menu
superiore del disco (p. 9).
Problema Possibili cause e soluzioni
Impossibile collegarsi a Internet. Per collegarsi a Internet selezionando Collegato via cavo in Impostazione connessione,
collegare correttamente il cavo di rete. (p. 31)
Accendere il dispositivo collegato, quale un router o un modem a banda larga.
Collegare correttamente il router e/o il modem a banda larga.
Se è selezionato Wireless in Impostazione connessione e se si desidera collegarsi a
Internet tramite Ethernet, selezionare Collegato via cavo. (p. 31)
Selezionare Wireless in Impostazione connessione se si desidera collegarsi a Internet
tramite una LAN wireless. (p. 31)
40 It
Risoluzione dei problemi
Messaggi su schermo
Nel caso in cui il disco che si tenta di riprodurre non sia idoneo oppure l’operazione non sia corretta, sul
teleschermo vengono visualizzati i seguenti messaggi.
Impossibile scaricare i contenuti BD-
Live.
Verificare che questo lettore possa collegarsi a Internet normalmente. Consultare
“Prova connessione”. (p. 32)
Collegare correttamente il dispositivo di archiviazione USB Controllare che il
dispositivo di archiviazione USB sia collegato al connettore USB del lettore. (p. 16)
Controllare che il Blu-ray Disc supporti BD-Live.
Collegare un dispositivo di archiviazione USB formattato in FAT16, FAT32 o NTFS.
Si raccomanda di collegare un dispositivo di archiviazione USB con almeno 2 GB di
spazio libero. Se non è presente spazio sufficiente, formattare il dispositivo di
archiviazione USB. (p. 30)
Consultare il manuale di istruzioni in dotazione con il disco o rivolgersi al produttore
del disco.
Impossibile rilevare il server DLNA. Verificare che questo lettore possa collegarsi alla rete normalmente. Consultare “Prova
connessione”. (p. 32)
Accendere il dispositivo collegato, quale un router a banda larga o il server.
Accertarsi che il lettore e il server siano collegati allo stesso router (punto di accesso).
A seconda del server DLNA, il lettore potrebbe necessitare dell’autorizzazione da parte
del server.
A seconda del server DLNA, è necessario modificare l’impostazione del firewall.
Impossibile riprodurre il file sul server
DLNA.
Accertarsi che il file sia riproducibile. (p. 3)
Verificare le impostazioni del server DLNA.
La riproduzione e la qualità del funzionamento potrebbero essere influenzate dalle
condizioni della propria rete domestica.
Impossibile collegarsi a Internet tramite
una LAN wireless.
Accertarsi che il router della LAN wireless sia acceso.
A seconda dell’ambiente circostante, per esempio del materiale che compone le pareti,
delle condizioni di ricezione delle onde radio o degli ostacoli che si frappongono tra il
lettore e il router della LAN wireless, è possibile che la distanza di comunicazione
risulti ridotta. Avvicinare maggiormente il lettore al router della LAN wireless.
I dispositivi che utilizzano una banda di frequenza 2,4 GHz, come forni a microonde,
dispositivi Bluetooth o dispositivi cordless digitali, possono interrompere la
comunicazione. Allontanare il lettore da tali dispositivi oppure spegnerli.
Se la connessione a Internet tramite una LAN wireless continua a non funzionare
nonostante le due soluzioni proposte sopra, provare a connettersi tramite Ethernet
selezionando Collegato via cavo in Impostazione connessione. (p. 31)
La rete wireless non è stata trovata o
risulta distorta.
Accertarsi che il router della LAN wireless sia acceso.
Spostare il lettore più vicino al router o cambiare l’orientamento del lettore o
dell’antenna del router della LAN wireless.
Se non è possibile configurare la connessione wireless tramite la funzione WPS,
selezionare un’altra opzione (Ricerca o Manuale) (p. 18).
Accertarsi che la rete wireless non sia disturbata da forni a microonde, telefoni cordless
digitali o altri dispositivi Wi-Fi nelle vicinanze.
I forni a microonde, i telefoni cordless digitali o gli altri dispositivi wireless nelle
vicinanze possono disturbare la rete wireless. Spegnere questi dispositivi.
Accertarsi che i firewall presenti nella rete consentano l’accesso alla connessione
wireless del presente lettore.
Se la rete wireless non funziona correttamente all’interno dell’abitazione, provare a
utilizzare la connessione di rete cablata (wired).
Messaggio di errore Possibili cause e soluzioni
File non supportato
Il file non è supportato da questo lettore. Vedere “Tipi di dischi/file utilizzabili con questo lettore” (p. 3).
Codice regione errato! Il disco presenta un codice regionale incompatibile. Vedere “Informazioni sulla gestione della
regione per video Blu-ray Disc/DVD.” (p. 3).
Rete è fallita. Il lettore non può essere collegato alla rete. Verificare la connessione (p. 14) e le impostazioni Rete
(p. 31).
Rete è OK, proxy è fallito. Il lettore non può essere collegato al server Proxy. Vedere “Impostazione Proxy” (p. 32).
Nel menu SETUP non è autorizzata
la connessione BD-Live.
Non è autorizzata la connessione BD-Live. Vedere “Connessione BD-Live” (p. 32).
L’aggiornamento non è
riuscito per qualche ragione!
L’aggiornamento non è riuscito. Verificare se il file di aggiornamento è corrotto o illeggibile.
L’impostazione IP non è
valida! Cancellare ...
L’impostazione IP inserita non è valida. Immettere nuovamente le informazioni corrette.
Problema Possibili cause e soluzioni
41 It
Informazioni aggiuntive
5
Italiano
AVCHD
AVCHD è un nuovo formato (standard) per le
videocamere ad alta definizione utilizzabile per
registrare e riprodurre immagini HD ad alta risoluzione.
BD-Live™
BD-Live è uno standard che utilizza la connessione di
rete, consentendo al lettore di accedere online per
scaricare video promozionali e altri dati.
BDMV
BDMV (Blu-ray Disc Movie) si riferisce a uno dei
formati applicativi utilizzati per BD-ROM che
rappresenta una delle specifiche del Blu-ray Disc.
BDMV è un formato di registrazione equivalente al
DVD Video della specifica DVD.
Blu-ray 3D™
Blu-ray 3D consente di visualizzare le immagini 3D in
alta definizione.
BONUSVIEW™
I dischi compatibili con BONUSVIEW consentono di
apprezzare contemporaneamente sub-canale video per due
schermate, sub-canale audio e sottotitoli. Viene visualizzata
una piccola schermata all’interno della schermata principale
durante la riproduzione (Picture in Picture).
Closed Caption
Le Closed Caption sono un particolare genere di
sottotitoli, la cui differenza con i normali sottotitoli sta
nel fatto che i sottotitoli sono previsti per persone normo-
udenti mentre le Caption sono previste per persone non-
udenti. I sottotitoli raramente riportano l’audio completo.
A titolo di esempio, le Caption riportano gli effetti
sonori (es., “lo squillo di un telefono” e “il rumore dei
passi”), mentre i sottotitoli no. Prima di selezionare
questa impostazione, accertarsi che il disco contenga le
informazioni Closed Caption.
Spazio colore
Lo Spazio colore è una gamma di colori che possono
essere rappresentati. RGB è uno spazio colorato basato
sul modello di colore RGB (Red, Green and Blue, vale a
dire rosso, verde e blu) e viene tipicamente utilizzato per
i monitor PC. YCbCr è uno spazio colorato basato su un
segnale di luminanza (Y) e due segnali di differenza di
colore (Cb e Cr).
Deep Color
Deep Color si riferisce all’uso di varie profondità di
colore nelle visualizzazioni, a partire dalle profondità a
24-bit nelle precedenti versioni delle specifiche HDMI.
Questa profondità di bit extra consente agli HDTV e ad
altre visualizzazioni di passare da milioni di colori a
miliardi di colori, eliminando così il banding del colore
on screen per transizioni tonali uniformi e sottili
gradazioni tra i colori. L’aumentato rapporto di
contrasto può rappresentare più volte un maggior
numero di gradazioni di grigio tra il nero e il bianco.
Deep Color aumenta inoltre il numero dei colori
disponibili all’interno dei limiti definiti dallo spazio
colorato RGB o YCbCr.
DLNA
DLNA fornisce un’agevole condivisione dei supporti
digitali attraverso la rete domestica e quindi è possibile
riprodurre sul TV attraverso questo lettore i contenuti
digitali archiviati sul proprio PC su cui è installato un
software del server DLNA o altro dispositivo
compatibile DLNA. Per connettere il lettore ai propri
server DLNA, sono necessarie alcune impostazioni per
il server o il dispositivo. Per dettagli, consultare il
software del server o del dispositivo DLNA.
DivX®
DivX®: è un formato video digitale creato da DivX,
LLC, un’affiliata di Rovi Corporation. Questo è un
dispositivo DivX Certified® ufficiale che riproduce
video DivX. Visitare divx.com per maggiori
informazioni e per gli strumenti software per convertire
i propri file in video DivX.
Dolby Digital
Un sistema sonoro sviluppato dai Dolby Laboratories
che fornisce qualità da sala cinematografica all’uscita
audio quando il prodotto è collegato a un processore o
amplificatore Dolby Digital.
Dolby Digital Plus
Un sistema sonoro sviluppato come estensione di Dolby
Digital. Questa tecnologia di codificazione audio
supporta audio surround 7.1 multicanale.
Dolby TrueHD
Dolby TrueHD è una tecnologia di codifica senza
perdita di qualità che supporta fino a 8 canali di suono
surround multicanale per i dischi ottici di ultima
generazione. Il suono riprodotto è fedele alla fonte
originale bit per bit.
DRC (Dynamic Range Control, Gamma di controllo
dinamica)
DRC consente di regolare la gamma tra i suoni a volumi
più alti e quelli più bassi (gamma dinamica) per la
riproduzione a un volume medio. Utilizzare questa
funzione quando è difficile sentire i dialoghi, oppure nel
caso la riproduzione disturbi i vicini.
DTS
Questo è un sistema sonoro digitale sviluppato da DTS
per l’uso nei cinema.
DTS-HD High Resolution Audio
DTS-HD High Resolution Audio è una nuova
tecnologia sviluppata per la nuova generazione di dischi
ottici ad alta definizione.
DTS-HD Master Audio
DTS-HD Master Audio è una nuova tecnologia di
compressione audio lossless sviluppata per la nuova
generazione di dischi ottici ad alta definizione.
Glossario
42 It
Glossario
FLAC
FLAC (Free Lossless Audio Codec) è un formato libero
per la compressione di dati audio lossless. Benché
inferiore a livello di tasso di compressione rispetto agli
altri formati audio lossless, spesso è in grado di fornire
una qualità audio superiore.
HDMI
HDMI (High-Definition Multimedia Interface =
Interfaccia multimediale ad alta definizione) è
un’interfaccia che supporta sia video che audio in un
singolo collegamento digitale. Il collegamento HDMI
porta il segnale standard a segnali video ad alta
definizione e segnali audio multicanale a componenti
AV, quali TV muniti di HDMI, in formato digitale senza
degradazione.
Letter Box (LB 4:3)
Dimensione dello schermo che taglia la parte superiore e
inferiore dell’immagine per consentire la visione ad
ampio schermo (16:9) su un TV 4:3 collegato.
Suono lineare PCM
Il PCM lineare è un formato di registrazione del segnale
utilizzato per i CD audio e per alcuni DVD e dischi Blu-
ray. Il suono sui CD audio è registrato a 44,1 kHz con 16
bit. (Sui dischi DVD il suono è registrato tra 48 kHz con
16 bit e 96 kHz con 24 bit mentre sui dischi Blu-ray è tra
48 kHz con 16 bit e 192 kHz con 24 bit.)
Indirizzo Mac
L’indirizzo Mac è un valore unico assegnato a un
dispositivo in rete per scopi di identificazione.
Pan Scan (PS 4:3)
Dimensione dello schermo che taglia i lati
dell’immagine per consentire la visione ad ampio
schermo (16:9) su un TV 4:3 collegato.
Sottotitoli
Righe di testo che appaiono sul fondo dello schermo che
traducono o trascrivono il dialogo. Sono registrate su
molti dischi DVD e Blu-ray.
x.v.Color
x.v. Color riproduce una gamma di colori maggiore di
prima, mostrando pressoché tutti i colori che l’occhio
umano può percepire.
43 It
Informazioni aggiuntive
5
Italiano
Dati generali
Alimentazione
[Modello per Regno Unito, Europa e Russia]
............................................................................... CA 110–240 V, 50 Hz
[Modello per Centro e Sud America]
.......................................................................... CA 110–240 V, 50/60 Hz
[Altri modelli] ........................................................CA 110–240 V, 60 Hz
Consumo energetico .............................................................................. 17W
Consumo energetico in standby
Controllo HDMI Spento, Network Standby Spento ........... 0,2 W (tipico)
Controllo HDMI Acceso, Network Standby Spento........... 0,3 W (tipico)
Controllo HDMI Spento, Network Standby Acceso........... 5,5 W (tipico)
Controllo HDMI Acceso, Network Standby Acceso .......... 5,5 W (tipico)
Dimensioni (L × A × P, incluse le parti sporgenti) ...... 435 × 86 × 257 mm
Peso .....................................................................................................2,7 kg
Prestazioni audio
Livello di uscita audio (1 kHz, 0 dB)
Blu-ray Disc/DVD/CD-DA.........................................................2 ± 0,3 V
Rapporto segnale rumore
Blu-ray Disc/DVD/CD-DA............................................................ 115 dB
Gamma dinamica
Blu-ray Disc/DVD ......................................................................... 105 dB
CD-DA ........................................................................................... 100 dB
Distorsione armonica (1 kHz)
Blu-ray Disc/DVD/CD-DA............................................................0,003%
Risposta in frequenza
Blu-ray Disc/DVD
........................Da 4 Hz a 22 kHz (48 kHz, frequenza di campionamento)
Da 4 Hz a 44 kHz (96 kHz, frequenza di campionamento)
CD-DA .......................................................................... Da 4 Hz a 20 kHz
Ingresso/uscita
Uscita HDMI ..........................................................Connettore di tipo A × 1
480i/576i/480p/576p/720p/1080i/1080p/1080p@24Hz,
Deep Color, x.v. Supporto Color
Uscita digitale......................................................... Ottica × 1, coassiale × 1
Uscita audio analogica...........................................................Mixed 2 ch × 1
USB ........................................................................Connettore di tipo A × 2
LAN Wireless..................................................Standard: IEEE 802.11 b/g/n
Gamma di frequenza: banda 2,4GHz
Altri apparecchi ............................................................Remote IN/OUT × 1
Ethernet × 1
I dati tecnici sono soggetti a modifiche senza preavviso.
Copyright
Il materiale audiovisivo potrebbe consistere di lavori
soggetti a copyright che non devono essere registrati
senza l’autorizzazione del proprietario del copyright.
Si prega di fare riferimento alle leggi specifiche del
paese di appartenenza.
“Blu-ray Disc™”, “Blu-ray™”, “Blu-ray 3D™”, “BD-
Live™”, “BONUSVIEW™” e i loghi sono marchi di
fabbrica della Blu-ray Disc Association.
è un marchio di fabbrica della DVD Format/Logo
Licensing Corporation.
Prodotto con licenza dai Dolby Laboratories. Il logo
Dolby e il simbolo della doppia D sono marchi di fabbrica
dei Dolby Laboratories.
Prodotto con licenza ai sensi dei brevetti USA n.:
5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,212,872;
7,333,929; 7,392,195; 7,272,567 e altri brevetti
statunitensi e mondiali registrati o in corso di
registrazione. DTS-HD, il relativo simbolo e DTS-HD e il
simbolo insieme sono marchi di fabbrica registrati e DTS-
HD Master Audio è un marchio di fabbrica di DTS Inc.
Il prodotto comprende software. © DTS, Inc. Tutti i diritti
riservati.
“HDMI”, il logo “HDMI” e High-Definition Multimedia
Interface sono marchi di fabbrica o marchi di fabbrica
registrati di HDMI Licensing LLC negli Stati Uniti e/o in
altri paesi.
x.v.Color™
“x.v. Color” e il logo “x.v. Color” sono marchi di fabbrica
di Sony Corporation.
“AVCHD” e il logo “AVCHD” sono marchi di fabbrica di
Panasonic Corporation e Sony Corporation.
Dati tecnici
Nota
Continua alla pagina successiva. \
44 It
Dati tecnici
Java è un marchio di fabbrica registrato di Oracle e/o delle
sue affiliate.
DLNA™ e DLNA CERTIFIED™ sono marchi di
fabbrica registrati di Digital Living Network Alliance.
Tutti i diritti riservati. L’uso non autorizzato è
severamente vietato.
Il logo Wi-Fi CERTIFIED è un marchio di certificazione
della Wi-Fi Alliance.
Il marchio Wi-Fi Protected Setup Identifier è un marchio
della Wi-Fi Alliance.
“Wi-Fi”, “Wi-Fi Protected Setup”, “Wi-Fi Direct” e
“Miracast” sono marchi o marchi registrati della Wi-Fi
Alliance.
Questo prodotto è concesso in licenza in base ai termini
della licenza d’uso del portafoglio di brevetti AVC e della
licenza d’uso del portafoglio di brevetti VC-1 per uso
personale e non commerciale del consumatore per (i) la
codifica video in conformità con lo standard AVC e con lo
standard VC-1 (“AVC/VC-1 Video”) e/o (ii) la decodifica
video AVC/VC-1 decodificata dal consumatore attuata in
attività personale e non commerciale e/o è stata ottenuta da
un fornitore video provvisto di licenza per la fornitura
video AVC/VC-1. Non si concede alcuna licenza o non sarà
implicita per altri usi. Ulteriori informazioni sono ottenibili
da MPEG LA, LLC. Consultare http://www.mpegla.com.
Questo prodotto è concesso in licenza in base ai termini
della licenza d’uso del portafoglio di brevetti MVC per uso
personale e non commerciale del consumatore per (i) la
codifica video in conformità con lo standard MVC (“MVC
Video”) e/o (ii) la decodifica di video MVC codificati dal
consumatore attuata in attività personale e/o ottenuti da un
fornitore video provvisto di licenza per la fornitura di
video MVC. Non si concede alcuna licenza o non sarà
implicita per altri usi. Ulteriori informazioni sono ottenibili
da MPEG LA, LLC. Consultare http://www.mpegla.com
Windows Media Player è un marchio di fabbrica registrato o un
marchio di fabbrica di Microsoft negli Stati Uniti e/o altri paesi.
Copyright 2004-2012 Verance Corporation. Cinavia® è un
marchio di fabbrica di Verance Corporation. Protetto dal
brevetto statunitense n. 7,369,677 e da brevetti mondiali
registrati o in corso di registrazione con licenza di Verance
Corporation. Tutti i diritti riservati.
DivX®, DivX Certified®, DivX Plus® HD e i loghi
associati sono marchi di fabbrica di Rovi Corporation o
delle sue affiliate e sono utilizzati con licenza.
DivX Certified® per riprodurre video DivX® e DivX
Plus® HD (H.264/.MKV) fino a 1080p HD, inclusi
contenuti premium.
INFORMAZIONI SUI VIDEO DIVX: DivX® è un
formato video digitale creato da DivX, LLC, un’affiliata di
Rovi Corporation. Questo è un dispositivo DivX Certified®
ufficiale che ha superato test rigorosi per la riproduzione di
video DivX. Visitare divx.com per maggiori informazioni e
per gli strumenti software per convertire i propri file in
video DivX.
INFORMAZIONI SUL SERVIZIO DIVX VIDEO-ON-
DEMAND: il dispositivo DivX Certified® deve essere
registrato per riprodurre contenuti DivX Video-on-Demand
(VOD). Per generare il codice di registrazione, individuare
la sezione DivX VOD nel menu di impostazione del
dispositivo. Visitare vod.divx.com per maggiori
informazioni su come completare la registrazione.
45 It
Informazioni aggiuntive
5
Italiano
INFORMAZIONI AGGIUNTIVE
Numerics
2ND AUDIO, telecomando ...................8
A
A/B, telecomando ..................................9
Aggiornamento del software ................37
Aggiornamento, menu SETUP ............30
Altri collegamenti ................................17
ANGLE, telecomando ...........................9
Angolo,
menu a schermo (On Screen) ...........23
Archivio locale, menu SETUP .............30
Audio, formati di uscita .......................35
Audio, menu a schermo (On Screen) ...23
Audio, menu SETUP ...........................31
AUDIO, telecomando ............................9
Auto Riproduzione disco,
menu SETUP ...................................31
AV CONTROLLER ............................22
B
BD-Live ...............................................26
Bitrate,
menu a schermo (On Screen) ...........23
Brano/File,
menu a schermo (On Screen) ...........23
C
Cambiare password, menu SETUP ......31
Capitolo,
menu a schermo (On Screen) ...........23
Caricare le impostazioni predefinite,
menu SETUP ...................................30
CLEAR, telecomando ............................8
Closed Caption, menu SETUP .............33
Coassiale / Ottico, menu SETUP .........34
Code Page,
menu a schermo (On Screen) ...........23
Codice del paese, menu SETUP ..........31
Connessione BD-Live,
menu SETUP ...................................32
Contenuti USB, riproduzione ..............19
Controllo HDMI, menu SETUP ..........30
Controllo Network, SETUP menu .......32
D
Data disc, riproduzione ........................19
Digital Media Controller (DMC) .........15
DivX (R) VOD DRM,
menu SETUP ...................................31
DLNA ..................................................15
Downmix 2 canali, menu SETUP ........34
Downsampling, menu SETUP .............34
DRC, menu SETUP .............................34
Dropbox ...............................................21
E
ENTER, telecomando ............................9
F
Funzionamento del menu SETUP ........29
Funzione Controllo HDMI ...................30
Funzione di ricerca ...............................25
Funzione Picture in Picture ..................26
H
HDMI 1080p 24Hz, menu SETUP ......33
HDMI Deep Color, menu SETUP .......33
HDMI, menu SETUP ...........................34
HOME, telecomando ..............................8
I
Impostazione Audio, menu SETUP .....34
Impostazione connessione,
menu SETUP ...................................31
Impostazione diffusori,
menu SETUP ...................................34
Impostazione Display, menu SETUP ...32
Impostazione Generale,
menu SETUP ...................................30
Impostazione Proxy, menu SETUP ......32
Impostazioni IP, menu SETUP ............32
Informazioni di sistema,
menu SETUP ...................................34
Informazioni su Web Album ................21
Informazioni, menu SETUP .................32
Installazione rapida, menu SETUP ......30
L
Lingua, menu SETUP ..........................30
M
Menu a schermo (On Screen) ...............23
Menu di stato ........................................24
Menu, menu SETUP ............................31
Messaggio di riproduzione in 3D,
menu SETUP ...................................30
Miracast ................................................22
Modalità deinterlacciamento,
menu SETUP ...................................33
Modalità/Modalità di riproduzione,
menu a schermo (On Screen) ...........23
N
Notifica aggiornamento ........................30
O
ON SCREEN, telecomando ...................9
OSD, menu SETUP ..............................30
P
Parental Control, menu SETUP ...........31
PBC (Push Button Configuration) .......31
PIN code (WPS) ...................................31
PIP, telecomando ....................................8
POP UP/MENU, telecomando ...............9
Post Process, menu SETUP ..................34
PROGRAM, telecomando ......................8
Prova connessione, menu SETUP ........32
R
REPEAT, telecomando ..........................8
Replay istantaneo,
menu a schermo (On Screen) ...........23
Rete, menu SETUP ..............................31
RETURN, telecomando .........................9
Ricerca Instantanea,
menu a schermo (On Screen) ...........23
Riduzione del rumore, menu SETUP ...33
Riproduzione programmata ..................25
Riproduzione, menu SETUP ................31
S
SEARCH, telecomando ......................... 9
Secondo Audio,
menu a schermo (On Screen) .......... 23
Secondo Video,
menu a schermo (On Screen) .......... 23
Segno Angolo, menu SETUP .............. 31
Segno PIP, menu SETUP .................... 31
SETUP, menu ...................................... 27
SETUP, telecomando ............................ 9
SHUFFLE, telecomando ....................... 8
Sicurezza, menu SETUP ..................... 31
Simbolo audio secondario,
menu SETUP ................................... 31
Sistema TV, menu SETUP .................. 33
Sistema, menu SETUP ........................ 30
Slide Show,
menu a schermo (On Screen) .......... 23
Sottotitolo,
menu a schermo (On Screen) .......... 23
Sottotitolo, menu SETUP .................... 31
Spazio colorato, menu SETUP ............ 33
Standby automatico, menu SETUP ..... 30
STATUS, telecomando .......................... 9
Stile sottotitolo,
menu a schermo (On Screen) .......... 23
SUBTITLE, telecomando ...................... 9
T
Tasti colore, telecomando ...................... 8
Tasti cursore, telecomando .................... 9
Tasti di comando, telecomando ............. 9
Tasti numerici, telecomando ................. 8
Telecomando ......................................... 8
Teleschermo, menu SETUP ................ 32
Tempo,
menu a schermo (On Screen) .......... 23
Titolo, menu a schermo (On Screen) ... 23
TOP MENU, telecomando .................... 9
Transizione,
menu a schermo (On Screen) .......... 23
TV, menu SETUP ................................ 32
U
Ultimo salvataggio, menu SETUP ...... 31
UpMix, menu SETUP ......................... 34
Uscita 3D, menu SETUP ..................... 32
Uscita audio, menu SETUP ................. 34
Uscita SACD, menu SETUP ............... 34
V
Video Process, menu SETUP .............. 33
Video, formati di uscita ....................... 36
W
WPS (Impostazione Wi-Fi protetta) .... 31
Y
YouTube .............................................. 21
Z
ZOOM, telecomando ............................. 8
Indice analitico
Precaución-i Es
1 Para asegurar el mejor rendimiento de este aparato, lea
atentamente este manual. Y luego guárdelo en un lugar
seguro para poder consultarlo en el futuro en caso de ser
necesario.
2 Instale esta unidad en un lugar bien ventilado, fresco, seco y
limpio, alejado de la luz directa del sol, fuentes de calor,
vibración, polvo, humedad y/o frío. Para una adecuada
ventilación, permita que el equipo tenga el siguiente espacio
libre mínimo:
Superior: 10 cm
Posterior: 10 cm
Laterales: 10 cm
3 Coloque este aparato lejos de otros aparatos eléctricos,
motores o transformadores, para evitar así los ruidos de
zumbido.
4 No exponga este aparato a cambios bruscos de temperaturas,
del frío al calor, ni lo coloque en lugares muy húmedos (una
habitación con deshumidificador, por ejemplo), para impedir
así que se forme condensación en su interior, lo que podría
causar una descarga eléctrica, un incendio, daños en el
aparato y/o lesiones a las personas.
5 Evite instalar este aparato en un lugar donde puedan caerle
encima objetos extraños y/o donde quede expuesto al goteo o
a la salpicadura de líquidos. Encima de este aparato no ponga:
Otros componentes, porque pueden causar daños y/o
decoloración en la superficie de este aparato.
Objetos con fuego (velas, por ejemplo), porque
pueden causar un incendio, daños en el aparato y/o
lesiones a las personas.
Recipientes con líquidos, porque pueden caerse y
derramar el líquido, causando descargas eléctricas al
usuario y/o dañando el aparato.
6 No tape este aparato con un periódico, mantel, cortina, etc.
para no impedir el escape del calor. Si aumenta la
temperatura en el interior del aparato, esto puede causar un
incendio, daños en el aparato y/o lesiones a las personas.
7 No enchufe este aparato a una toma de corriente hasta
después de haber terminado todas las conexiones.
8 No ponga el aparato al revés. Podría recalentarse y
posiblemente causar daños.
9 No utilice una fuerza excesiva con los conmutadores, los
controles y/o los cables.
10 Cuando desconecte el cable de alimentación de la toma de
corriente, sujete la clavija y tire de ella; no tire del propio
cable.
11 No limpie este aparato con disolventes químicos porque
podría estropear el acabado. Utilice un paño limpio y seco
para limpiar el aparato.
12 Utilice solamente la tensión especificada en este aparato.
Utilizar el aparato con una tensión superior a la especificada
resulta peligroso y puede producir un incendio, daños en el
aparato y/o lesiones a las personas. Yamaha no se hará
responsable de ningún daño debido al uso de este aparato con
una tensión diferente de la especificada.
13 Para impedir daños debidos a relámpagos, desconecte el
cable de alimentación de la toma de corriente durante una
tormenta eléctrica.
14 No intente modificar ni arreglar este aparato. Póngase en
contacto con el personal de servicio Yamaha cualificado
cuando necesite realizar alguna reparación. La caja no deberá
abrirse nunca por ninguna razón.
15 Cuando no piense utilizar este aparato durante mucho tiempo
(cuando se ausente de casa por vacaciones, por ejemplo)
desconecte el cable de alimentación de la toma de corriente.
16 Asegúrese de leer la sección “Resolución de problemas”
antes de dar por concluido que su aparato está averiado.
17 Antes de trasladar este aparato, pulse p para ponerlo en el
modo de espera, y luego desconecte el cable de alimentación
de CA de la toma de corriente.
18 La condensación se formará cuando cambie de repente la
temperatura ambiental. Desconecte en este caso el cable de
alimentación de la toma de corriente y no utilice el aparato.
19 El aparato se calentará cuando la utilice durante mucho
tiempo. Desconecte en este caso la alimentación y luego no
utilice el aparato para permitir que se enfríe.
20 Instale este aparato cerca de la toma de CA y donde se pueda
alcanzar fácilmente la clavija de alimentación.
21 Las baterías no deberán exponerse a un calor excesivo como,
por ejemplo, el que producen los rayos del sol, el fuego y
similares.
SEGURIDAD CONTRA LA RADIACIÓN LÁSER
Este aparato utiliza rayos láser. Debido a la posibilidad de
que se produzcan daños en los ojos, la extracción de la
cubierta del aparato o las reparaciones solamente deberán
ser realizadas por un cnico cualificado.
PELIGRO
Este aparato emite radiación láser visible cuando se abre.
Evite la exposición directa a los rayos láser. Cuando se
conecte este aparato a una toma de corriente no acerque
sus ojos a la abertura de la bandeja del disco ni a otras
aberturas para mirar al interior.
Precaución: lea las indicaciones siguientes antes de
utilizar este aparato.
No utilice esta unidad a menos de 22 cm de personas
con marcapasos o implantes de desfibrilador.
Las ondas de radio pueden afectar a los dispositivos
electromédicos. No utilice este aparato cerca de
dispositivos médicos ni en el interior de instalaciones
médicas.
Este aparato no se desconecta de la fuente de
alimentación de CA si está conectada a una toma de
corriente, aunque la propia aparato esté apagada con p.
A este estado se le llama modo de espera. En este
estado, este aparato ha sido diseñada para que consuma
un cantidad de corriente muy pequeña.
Si se utiliza el enchufe de conexión a la red o un
acoplador del aparato como el dispositivo de
desconexión, dicho dispositivo deberá permanecer
operativo en todo momento.
ADVERTENCIA
PARA REDUCIR EL RIESGO DE INCENDIO O
DESCARGA ELÉCTRICA, NO EXPONGA ESTE
APARATO A LA LLUVIA NI A LA HUMEDAD.
1 Es
1
2
3
4
5
Español
Qué puede hacer con este reproductor ........... 2
Amplia variedad de discos y formatos de archivo admitidos
... 2
Características de red mejoradas .................................... 2
Configuración y operaciones sencillas ........................... 2
Piezas incluidas ................................................. 2
Información sobre discos y archivos............... 3
Tipos de discos/archivos que pueden utilizarse con este
reproductor ................................................................. 3
Para cargar un disco........................................................ 4
Precauciones con los discos............................................ 5
Aviso para ver imágenes de vídeo en 3D ....................... 5
Tecnología Cinavia......................................................... 5
Controles y funciones ....................................... 6
Panel delantero ............................................................... 6
Panel trasero ................................................................... 7
Mando a distancia........................................................... 8
Conexiones de vídeo/audio............................. 11
Conexión con un televisor a través de un receptor de A/V
... 12
Conexión directa con un televisor ................................ 12
Conexión con un televisor y un equipo de audio.......... 13
Conexión de red ............................................... 14
Conexión inalámbrica................................................... 14
Conexión con cable ...................................................... 14
Configuración de servidor DLNA ................................ 15
Conexión USB .................................................. 16
Otras conexiones ............................................. 17
Conexión con las tomas REMOTE CONTROL........... 17
Conexión del cable de alimentación............................. 17
Ajustes iniciales ............................................... 18
Configuración con la Configuración Sencilla .............. 18
Configuración de conexión inalámbrica....................... 18
Menú HOME ...................................................... 19
Reproducción de fotos/música/vídeo............................ 19
Uso de servicios de red................................... 21
Acerca de Dropbox™ ................................................... 21
Acerca de álbumes Web de Picasa™ ........................... 21
Acerca de YouTube .................................................. 21
Uso de imágenes y vídeos de teléfonos
inteligentes en la pantalla del televisor
(Miracast™)................................................... 22
Uso de este reproductor desde dispositivos
móviles (AV CONTROLLER)........................ 22
Funciones avanzadas de reproducción......... 23
Menú en pantalla .......................................................... 23
Menú de estado............................................................. 24
Programación de la reproducción................................. 25
Uso de la búsqueda ...................................................... 25
Uso de BONUSVIEW™ y BD-Live........................ 25
Utilización de la función Imagen en Imagen
(reproducción de audio/vídeo secundario) ............... 26
Utilización de la función BD-Live™ ........................... 26
Menú SETUP..................................................... 27
Ejemplo de funcionamiento del menú SETUP............. 29
Configuración General ................................................. 30
Configuración de pantalla............................................. 32
Configuración de audio ................................................ 34
Sistema de Información ................................................ 34
Acerca de los formatos de salida de audio ................... 35
Acerca de los formatos de salida de vídeo HDMI........ 36
Actualización de software ............................... 37
Actualización del software ........................................... 37
Resolución de problemas................................ 38
Alimentación................................................................. 38
Funcionamiento básico ................................................. 38
Reproducción de disco.................................................. 38
Imagen........................................................................... 39
Sonido ........................................................................... 39
Red ................................................................................ 39
Mensajes en pantalla ..................................................... 40
Glosario............................................................. 41
Especificaciones .............................................. 43
Información general ...................................................... 43
Rendimiento de audio ................................................... 43
Entrada/salida................................................................ 43
Propiedad intelectual..................................................... 43
Índice ................................................................. 45
(al final de este manual)
Acerca de este manual
Este manual describe cómo utilizar este reproductor
con un mando a distancia, excepto cuando no esté
disponible. También se puede acceder a algunas de
estas operaciones mediante los botones del panel
delantero.
Las notas contienen información importante sobre
seguridad e instrucciones de funcionamiento. Las
indicaciones señalan consejos de funcionamiento.
Este manual se ha impreso antes de la fabricación. El
diseño y las especificaciones están sujetos a cambios
en parte como resultado de mejoras, etc. En caso de
diferencias entre el manual y el producto, este último
tiene prioridad.
Iconos utilizados en este manual
Los iconos se utilizan para indicar botones/funciones
disponibles para un formato particular. Para obtener
información sobre los discos y formatos que se pueden
reproducir, consulte página 3.
: BD-Video
: DVD-Video, DVD-VR, DVD+VR
: CD de audio, Super Audio CD
: archivos de vídeo
: archivos de audio
: archivos de fotos
Índice
1. Introducción
2. Conexiones
3. Reproducción
4. Ajustes
5. Información adicional
Information about third party software licenses...i
El nuevo software que proporciona características
adicionales o mejoras del producto se comercializará
según sea necesario. Se recomienda actualizar
periódicamente el software de este reproductor a la
versión más reciente. Para ver información detallada,
consulte “Actualización de software” (pág. 37).
BD
DVD
CD
VIDEO
MUSIC
PHOTO
2 Es
INTRODUCCIÓN
Amplia variedad de discos y formatos de archivo admitidos
Blu-ray Disc™, DVD, SA-CD y CD (pág. 23)
Blu-ray 3D™ (pág. 11), BONUSVIEW™ y BD-Live™ (pág. 25)
Archivos de vídeo, música y fotos en discos DVD-R/RW, discos CD-R/RW y dispositivos de memoria USB
(pág. 19)
Características de red mejoradas
Uso de contenido del servidor DLNA (PC o NAS) (pág. 19)
Uso de contenido de transferencia en los servicios de red (pág. 21)
Uso de este reproductor desde dispositivos móviles (AV CONTROLLER) a través de la red (pág. 22)
Uso de imágenes y vídeos de teléfonos inteligentes en la pantalla del televisor (Miracast™) (pág. 22)
Configuración y operaciones sencillas
Configuración inicial rápida y sencilla (pág. 18)
Configuración inalámbrica automática con el WPS (Wi-Fi Protected Setup) (pág. 18)
Actualización de software a través de red o USB (pág. 37)
Operaciones secuenciales del televisor, el receptor de A/V y este reproductor (control HDMI) (pág. 30)
Asegúrese de que con el producto se han suministrado los siguientes accesorios.
Qué puede hacer con este reproductor
Piezas incluidas
5#%&
5#%&
Contenido USB
Red inalámbrica
(compatible con WPS)
Diversos discos
Contenido de teléfonos
inteligentes (Miracast)
Contenido de
transferencia de red
Contenido PC/NAS
(DLNA)
Pilas (×2)
(AAA, R03, UM-4)
Mando a
distancia
Cable de alimentación
3 Es
Introducción
1
Español
Tipos de discos/archivos que
pueden utilizarse con este
reproductor
En este reproductor se pueden reproducir discos de
12 cm y 8 cm. No utilice un adaptador de 8 cm a
12 cm.
Utilice discos que sean compatibles con los
estándares que se indican con la presencia de
logotipos oficiales en la etiqueta del disco. La
reproducción de discos que no cumplan con estos
estándares no está garantizada. Además, la calidad
de imagen o sonido no está garantizada aunque
puedan reproducirse estos discos.
* Este reproductor es compatible con un dispositivo de
memoria USB con formato FAT 16/32 y NTFS.
*1 Frecuencia de muestreo entre 32-48 kHz (estéreo) y
bitrate entre 8-320 kbps
*2 Frecuencia de muestreo entre 32-48 kHz (estéreo) y
bitrate entre 32-192 kbps
*3 Frecuencia de muestreo de hasta 192 kHz/24 bits
(LPCM/estéreo)
*4 WMV9 (resolución máxima: 1.920 x 1.080)
No se garantiza la reproducción de los archivos
incluidos en la tabla anterior en función del método
utilizado para la creación del archivo o del códec
empleado.
No se garantiza la reproducción de todos los
archivos de un disco, dispositivo de memoria USB y
de la red.
No pueden reproducirse los archivos con protección
de los derechos de autor.
Al utilizar DLNA, el archivo debe cumplir los
requisitos del servidor DLNA.
Información sobre la gestión de la
región en los vídeos Blu-ray Disc/DVD
Los discos y los reproductores de vídeo Blu-ray
Disc/DVD tienen códigos de región, que dictan las
regiones en las que se puede reproducir un disco.
Consulte la marca de código de región que aparece
en el panel trasero de este reproductor.
En el caso de un Blu-ray Disc, el disco puede
reproducirse en este reproductor si tiene la misma
marca de código de región o bien la marca “ABC”
de código de región.
En el caso de un disco DVD, el disco puede
reproducirse en este reproductor si tiene la misma
marca de código de región o bien la marca “ALL” de
código de región.
Información sobre discos y archivos
Tipo de soporte Formato de grabación
BD-ROM/BD-R/
BD-RE
BD-Video/archivos de datos
DVD-ROM DVD-Video
DVD-R/DVD-R
DL/DVD-RW
DVD-Video/DVD-VR/AVCHD/archivos de
datos
DVD+R/DVD+R
DL/DVD+RW
DVD-Video/DVD+VR/AVCHD/archivos de
datos
CD-ROM CDDA/HDCD
CD-R/CD-RW CDDA/archivos de datos
SA-CD SA-CD
USB* Archivos de datos
DLNA Archivos de datos
Formatos de
archivo de
audio
reproducibles
Formatos de
archivo de vídeo
reproducibles
Formatos de
archivo de foto
reproducibles
MP3 (.mp3)
*1
WMA (.wma)
*2
AAC (.aac/.m4a)
WAV (.wav)
*3
FLAC (.flac)
*3
ALAC (.m4a)
*3
DivX (.divx)
MKV con formato
DivX (.mkv)
MKV con H.264
(.mkv)
MPEG PS (.mpeg/
.mpg)
MPEG TS (.ts)
MPEG-4 (.mp4)
VOB (.vob)
AVI (.avi)
ASF (.asf)
WMV (.wmv)
*4
JPEG (.jpeg/.jpg)
GIF (.gif)
PNG (.png)
MUSIC
PHOTO
Notas
Información sobre la gestión de la región
Destino BD-Video DVD-Video
EE. UU. y Canadá Código de región
“A” o “ABC”
Número de región
“1” o “ALL”
Europa Código de región
“B” o “ABC”
Número de región
“2” o “ALL”
Asia, Taiwán y
Corea
Código de región
“A” o “ABC”
Número de región
“3” o “ALL”
Centroamérica y
América del Sur
Código de región
“A” o “ABC”
Número de región
“4” o “ALL”
1
ALL
2
ALL
3
ALL
4
ALL
4 Es
Información sobre discos y archivos
Las operaciones y funciones de vídeo Blu-ray Disc/
DVD pueden ser diferentes de las explicaciones que
aparecen en este manual y algunas operaciones
pueden estar prohibidas debido a las configuraciones
del fabricante del disco.
Si aparece una pantalla de menú o instrucciones de
funcionamiento durante la reproducción de un disco,
siga el procedimiento de funcionamiento indicado.
Según el disco, puede que no sea posible su
reproducción.
Finalice todos los soportes de grabación que desee
reproducir en este reproductor.
Finalizar” hace referencia a un procesamiento al
que se somete un disco grabado para que se pueda
reproducir en otros reproductores/grabadores, así
como en este reproductor. Solo pueden reproducirse
en el reproductor los discos que se hayan finalizado.
(Este reproductor no dispone de una función para
finalizar discos.)
Acerca de Super Audio CD (SA-CD)
Formato de audio basado en los estándares de CD
actuales, pero con un mayor volumen de
información y, por tanto, una mayor calidad del
sonido. Hay tres tipos de discos: de una capa, de
doble capa e híbridos. El disco híbrido puede
reproducirse en los reproductores de CD
convencionales y también en reproductores de Super
Audio CD, ya que contiene información de CD de
audio estándar y también de Super Audio CD.
Esta unidad no muestra los datos de texto de los
discos en el visor del panel delantero.
Para cargar un disco
Inserte el disco con la etiqueta hacia arriba.
En el caso de un disco grabado por ambos lados,
ponga boca abajo el lado que va a reproducir.
La reproducción podría iniciarse automáticamente,
dependiendo del disco y la configuración del
reproductor.
Es posible que el menú aparezca primero, según el disco.
El tiempo para cargar el disco puede variar
dependiendo del disco.
Australia Código de región
“B” o “ABC”
Número de región
“4” o “ALL”
Rusia Código de región
“C” o “ABC”
Número de región
“5” o “ALL”
Notas
Información sobre la gestión de la región
Destino BD-Video DVD-Video
4
ALL
5
ALL
Nota
Notas
1
2
3
Tipo de disco Super Audio CD
Disco de una capa
Capa HD
Disco de doble capa
Disco de capa híbrida
Capa HD
Capa CD
Capa HD
Disco Super Audio CD híbrido
Capa del CD reproducible
en cualquier reproductor
de CD
- DSD estéreo de alta calidad
- DSD multicanal de alta calidad
Capa de alta densidad, con:
5 Es
Información sobre discos y archivos
Introducción
1
Español
Precauciones con los discos
Tenga cuidado con los arañazos y el
polvo
Los discos Blu-ray Disc, DVD y CD son sensibles al
polvo, a las huellas dactilares y especialmente a los
arañazos. Es posible que no se pueda reproducir un
disco con arañazos. Maneje los discos con cuidado y
guárdelos en un lugar seguro.
Almacenamiento apropiado de los
discos
Precauciones de manipulación
Limpieza de la lente lectora
No utilice nunca discos de limpieza de venta en el
mercado. La utilización de estos discos podría dañar
la lente.
Solicite la limpieza de la lente en el centro de
atención al cliente aprobado por Yamaha más
cercano.
Aviso para ver imágenes de vídeo
en 3D
Algunas personas pueden sufrir molestias (como
vista cansada, fatiga o náuseas) al ver imágenes de
vídeo en 3D. Se recomienda a todos los espectadores
realizar pausas periódicas durante la visualización de
imágenes de vídeo en 3D.
Si sufre alguna molestia, deje de ver las imágenes de
vídeo en 3D hasta que ésta desaparezca. Consulte
con un médico si sufre molestias agudas.
Lea atentamente los manuales de instrucciones (del
Blu-ray Disc y del televisor) y los mensajes de
precaución que aparecen en el televisor.
La vista de los niños pequeños (especialmente de
menos de seis años) todavía está en proceso de
desarrollo. Consulte con su médico (como un
pediatra o un oftalmólogo) antes de permitir a niños
pequeños ver imágenes de vídeo en 3D.
Los niños pequeños deben estar bajo la supervisión
de un adulto para garantizar que siguen las
recomendaciones descritas anteriormente.
Tecnología Cinavia
La tecnología Cinavia forma parte del sistema de
protección de los contenidos incluido en este
reproductor de Blu-ray Disc.
Es posible que aparezcan los siguientes mensajes y
que su reproductor de Blu-ray Disc detenga la
reproducción o silencie temporalmente la salida de
audio si reproduce una copia no autorizada de un
contenido protegido mediante la tecnología Cinavia.
Estos mensajes aparecen solo en inglés.
Aviso sobre Cinavia
Este producto utiliza la tecnología Cinavia para limitar el
uso de copias no autorizadas de algunas películas y vídeos
comerciales y de sus bandas sonoras. Al detectar el uso
prohibido de una copia no autorizada, aparecerá un
mensaje y se detendrá la reproducción o la copia.
Para obtener más información sobre la tecnología Cinavia,
consulte el Centro de información al consumidor de
Cinavia, que encontrará en el sitio web
http://www.cinavia.com
. Para solicitar más información
sobre Cinavia por correo, envíe una carta con su dirección
de correo a: Cinavia Consumer Information Center, P.O.
Box 86851, San Diego, CA, 92138, Estados Unidos
Ponga el disco en el centro de la caja y
almacene la caja y el disco en posición
vertical.
Evite guardar los discos en lugares con luz
solar directa, cerca de equipos de
calefacción o en lugares con una humedad
alta.
No deje caer los discos ni los someta a
vibraciones o impactos fuertes.
Evite almacenar los discos en lugares
donde haya mucha cantidad de polvo o
humedad.
Si la superficie está sucia, límpiela con
cuidado con un paño suave humedecido
(con agua solamente). Cuando limpie los
discos, mueva siempre el paño desde el
orificio central hacia el borde exterior.
No utilice pulverizadores de limpieza de
discos de vinilo, benceno, diluyente,
líquidos para prevenir la electricidad
estática ni otros disolventes.
No toque la superficie.
No pegue papel ni etiquetas adhesivas en el disco.
Si la superficie de reproducción de un disco está
sucia o rayada, el reproductor puede decidir que el
disco es incompatible y expulsar la bandeja
portadiscos o es posible que el disco no se
reproduzca correctamente. Limpie cualquier mancha
de la superficie de reproducción con un paño suave.
Nota
Reproducción detenida. Los contenidos que se
están reproduciendo están protegidos por
Cinavia® y su reproducción en este dispositivo
no está autorizada.
Para más información, visite http://www.cinavia.com.
Código de Mensaje 1.
Salida de audio temporalmente detenida. No
ajuste el volumen de reproducción. Los
contenidos que se están reproduciendo están
protegidos por Cinavia® y su reproducción en
este dispositivo no está autorizada.
Para más información, visite http://www.cinavia.com.
Código de Mensaje 3.
6 Es
Panel delantero
1 p (Encendido/en espera)
Pone en marcha el reproductor/activa el modo en
espera.
Mantenga pulsado p en el panel delantero durante más
de 5 segundos para reiniciar el reproductor (se
reiniciará el sistema).
2 Conector USB (pág. 16)
3 Indicador SA-CD
Se enciende cuando se carga un SA-CD y se selecciona
la capa SA-CD (pág. 4).
4 Visor del panel delantero
Muestra distintos tipos de información sobre el estado
del dispositivo.
5 Puerta de la bandeja portadiscos
6 (Expulsar)
Abre/cierra la bandeja portadiscos.
7 (Búsqueda hacia atrás/Salto hacia
atrás)
Pulse para saltar hacia atrás y mantenga pulsado para
buscar hacia atrás.
8 (Búsqueda hacia adelante/Salto
hacia adelante)
Pulse para saltar hacia adelante y mantenga pulsado
para buscar hacia adelante.
9 (Reproducción)
Inicia la reproducción.
0 (Pausa)
Pone la reproducción en pausa.
A (Detener)
Detiene la reproducción.
Retire la película protectora del panel delantero antes de empezar a utilizar el reproductor.
Controles y funciones
USB
5#%&
2 5 61 43 7 8 9 0 A
Nota
7 Es
Controles y funciones
Introducción
1
Español
Panel trasero
1 AUDIO OUT (L/R) (pág. 13)
2 HDMI (pág. 11)
3 DIGITAL OUT (COAXIAL/OPTICAL) (pág. 13)
4 USB (pág. 16)
5 NETWORK (pág. 14)
6 REMOTE CONTROL (OUT/IN) (pág. 17)
7 AC IN (pág. 17)
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT
NETWORK
USB
HDMI
REMOTE CONTROL
OUT IN
AC IN
1 6 72 3 45
8 Es
Controles y funciones
Mando a distancia
aparecerá en la esquina superior izquierda de la
pantalla cuando la tecla pulsada no esté disponible.
1 Transmisor de señales infrarrojas: Emite la
señal infrarroja. Oriente esta ventana al sensor del
mando a distancia (pág. 10).
2 p:
Enciende el reproductor o lo pone en modo de espera.
3 : Abre/cierra la bandeja portadiscos.
4 Teclas de colores : Utilice estas teclas según
las instrucciones en pantalla.
ZOOM :
Acerca/aleja la
imagen. El tamaño de la pantalla cambiará cada vez que
pulse la tecla (ampliar/reducir zoom: 3 pasos cada uno).
PROGRAM :
Establece el orden de
reproducción (pág. 25). Puede configurar hasta 15 pistas
(para discos de audio) o títulos/capítulos (DVD-Video).
SHUFFLE :
Selecciona el modo de reproducción aleatoria
(pág. 23).
REPEAT
: Permite cambiar el modo de repetición. El
modo de repetición mostrado a continuación cambiará
cada vez que se pulse el botón.
:Repite el título que se está reproduciendo.
:Repite el capítulo que se está reproduciendo.
:Repite la carpeta que se está reproduciendo.
: Repite todas las pistas/archivos del disco.
:
Repite la pista/archivo que se está reproduciendo.
5 Teclas numéricas: Permiten introducir números, o
durante la reproducción, saltar a la pista/capítulo
correspondiente al número introducido. Es posible que
estos botones no estén disponibles en función del tipo
de disco y la situación de reproducción.
6 CLEAR: Borra el número introducido o elemento
establecido.
7 PIP : Permite encender/apagar la función Imagen
en imagen (pág. 26). La Marca PIP ( ) se muestra
en pantalla cuando esta función está disponible.
También puede seleccionar esta opción desde el menú
en pantalla (pág. 23).
La Marca PIP se muestra solo cuando la Marca PIP
está activada (pág. 31).
8 MIRACAST: Inicia Miracast (pág. 22).
9 2ND AUDIO : Selecciona el audio secundario de
la función Imagen en imagen (pág. 26) o los
comentarios de audio. La Marca Audio Secundario
( ) se muestra en pantalla cuando esta función está
disponible (pág. 34). También puede seleccionar esta
opción desde el menú en pantalla (pág. 23).
La Marca Audio Secundario se muestra solo cuando
la Marca Audio Secundario está activada (pág. 31).
0 HOME: Muestra la pantalla de menú HOME
(pág. 19).
Nota
PROGRAM SHUFFLE REPEAT
REPEAT A/B
ZOOM
AUDIO
SUBTITTLE
ANGLE
SEARCH
MIRACAST
CLEAR
PIP
HOME
2ND
AUDIO
ENTER
TOP MENU
RETURN ON SCREEN
POP-UP MENU
SETUP
STATUSSETUP
RED
GREEN BLUE
YELLOW
L
N
J
K
H
E
M
I
0
7
6
5
D
4
3
8
A
9
C
B
E
F
2
1
G
Nota
Nota
BD
DVD
VIDEO PHOTO
DVD
CD
DVD
CD
VIDEO
PHOTO
BD
DVD
CD
PHOTO
BD
BD
9 Es
Controles y funciones
Introducción
1
Español
A TOP MENU : Muestra la pantalla de
menú principal si el disco contiene un menú.
Seleccione la opción deseada mediante 5/a/2/3 y
ENTER.
Las operaciones concretas pueden diferir
dependiendo del disco. Siga las instrucciones de
cada pantalla de menú.
B Teclas de cursor (5/a/2/3): Permiten mover la
selección en la pantalla de menú.
ENTER: Selecciona el menú/opción resaltado.
C RETURN: Permite volver al menú o pantalla anterior,
etc.
D Teclas de control
: Detiene la reproducción.
: Pone la reproducción en pausa.
: Reproduce el contenido.
/: Permite saltar hacia atrás/hacia adelante.
/
:
Permite buscar hacia atrás/hacia adelante. La
velocidad de búsqueda cambiará cada vez que pulse la
techa (buscar hacia atrás/adelante: 5 pasos cada una).
Pulse para reanudar la reproducción normal.
: Permite cambiar la velocidad de un pase de
diapositivas (más lento/más rápido: 3 pasos).
/
:
Púlselo para realizar una búsqueda o una repetición
instantánea. La búsqueda instantánea salta 30
segundos en el contenido. La repetición instantánea
reproduce el contenido desde 10 segundos antes.
E SETUP: Muestra la pantalla de menú SETUP
(pág. 27).
F STATUS: Muestra la información de reproducción
(pág. 24).
G REPEAT A/B :
Permite reproducir una parte específica que desee
repetir.
1 Pulse REPEAT A/B en la escena donde desee
establecer el punto inicial. Aparecerá “A-” en la
pantalla.
2 Vuelva a pulsar REPEAT A/B en la escena donde
desee establecer el punto final. Aparecerá “A-B” en
la pantalla. Se inicia la reproducció
n
de la
repetición.
3 Para cancelar la reproducción de la repetición, pulse
REPEAT A/B. Desaparecerá “A-B” y terminará la
reproducción de la repetición.
Es posible que esta función no se pueda realizar
dependiendo de las especificaciones del disco.
H SUBTITLE : Permite cambiar
el idioma de los subtítulos (pág. 42) si está disponible.
También puede seleccionar esta opción desde el menú
en pantalla (pág. 23).
I ANGLE : Permite cambiar el ángulo de
la cámara si el vídeo se ha grabado con varios ángulos.
La Marca de Angulo ( ) se muestra en pantalla
cuando esta función está disponible. También puede
seleccionar esta opción desde el menú en pantalla
(pág. 23).
La Marca de Angulo se muestra solo cuando la
Marca de Angulo está activada (pág. 31).
J AUDIO : Permite cambiar el idioma o
formato de audio. También puede seleccionar esta
opción desde el menú en pantalla (pág. 23).
K SEARCH :
Permite ir a un punto especificado durante la
reproducción. Para conocer los detalles sobre esta
función, consulte “Uso de la búsqueda” (pág. 25).
También puede seleccionar esta opción desde el menú
de estado (pág. 24).
L YouTube: Inicia YouTube (pág. 21).
M POP-UP/MENU : Muestra el menú
emergente. Los contenidos del menú que aparecen
varían en función del disco. Encontrará más
información sobre cómo ver y controlar el menú
emergente en el manual del disco.
La pantalla del menú principal aparece a veces al
pulsar POP-UP/MENU dependiendo del DVD.
N ON SCREEN: Muestra el menú en pantalla (pág. 23).
Nota
BD
DVD
BD
DVD
CD
VIDEO MUSIC PHOTO
BD
DVD
CD
VIDEO MUSIC
PHOTO
BD
DVD
CD
VIDEO MUSIC
Nota
Nota
BD DVD
CD
VIDEO
BD DVD
BD DVD
BD
DVD
BD
DVD
CD
BD
DVD
10 Es
Controles y funciones
Instalación de las pilas en el mando a
distancia
Cambie las dos pilas cuando note que disminuye el
alcance del mando a distancia.
Utilice pilas AAA, R03, UM-4.
Asegúrese de que las polaridades son las correctas.
Consulte la ilustración que encontrará en el interior
del compartimento de las pilas.
Extraiga las pilas si no va a utilizar el mando a
distancia durante un periodo de tiempo prolongado.
No mezcle pilas viejas con pilas nuevas.
No utilice juntas pilas de diferentes tipos (como pilas
alcalinas y pilas de manganeso). Lea con atención la
información del paquete, ya que diferentes tipos de
pilas pueden tener la misma forma y color.
Si observa fugas en las pilas, deséchelas
inmediatamente. Evite tocar el material derramado y
no deje que entre en contacto con ropa, etc. Limpie
con cuidado el compartimento antes de colocar pilas
nuevas.
No mezcle las pilas con los residuos domésticos;
deséchelas siguiendo la normativa local.
Mantenga las pilas fuera del alcance de los niños. En
caso de que se traguen una por accidente, acuda
inmediatamente a un médico.
Si tiene previsto no utilizar el mando a distancia
durante un periodo de tiempo prolongado, extraiga
las pilas del mando a distancia.
No cargue ni desmonte las pilas suministradas.
Alcance aproximado de
funcionamiento del mando a distancia
Función ID
Si se utilizan varios productos Yamaha, es posible que el
mando a distancia funcione en otro producto Yamaha o
bien que otro mando a distancia funcione en este
reproductor. En tal caso, cambie el ID del mando a
distancia para evitar un funcionamiento no deseado. Si
modifica el ID del mando a distancia, seleccione el mismo
ID para la unidad principal.
La configuración predeterminada es ID1.
1 Configuración del mando a distancia
Para modificar el ID de ID1 a ID2, mantenga
pulsado el botón de color rojo y el botón 2 de los
botones numéricos simultáneamente durante 7
segundos. Para modificar el ID de ID2 a ID1,
mantenga pulsado el botón de color rojo y el botón
1 de los botones numéricos simultáneamente
durante 7 segundos.
2 Configuración de la unidad principal
Mantenga pulsado y en el
panel delantero simultáneamente durante 2
segundos para mostrar el ID actual si:
No hay ningún disco en el reproductor.
La bandeja portadiscos está cerrada.
Se detiene la reproducción.
“NO DISC” aparece en el visor del panel
delantero.
Mantenga pulsadas las teclas durante 2 segundos
más para cambiar el ID entre ID1 y ID2.
Si el mando a distancia está sin pilas durante unos
minutos o si se dejan pilas agotadas en el mando a
distancia, el ID del mando a distancia se ajusta
automáticamente en ID1. Si desea utilizar el mando
a distancia con el ajuste ID2, coloque pilas nuevas y
vuelva a configurar el ID del mando a distancia.
Cuando se reinicia este reproductor, su ID del mando
a distancia será ID1.
Notas
1
3
22
USB
SA-CD
30°30°
Sensor del mando a distancia
6 m
Notas
11 Es
Conexiones
2
Español
CONEXIONES
Realice las conexiones de los cables de vídeo/audio correspondientes en el equipo que desee usar.
Consulte la página 35 para obtener información sobre los formatos de salida de audio/vídeo.
Prepare los cables de venta en el mercado necesarios para las conexiones. El tipo y el número de cables que necesita
varían en función del equipo que se va a conectar.
Uso de vídeo/audio con un televisor y un receptor de A/V
Consulte “Conexión con un televisor a través de un receptor de A/V” (pág. 12).
Uso de vídeo/audio solo con un televisor
Consulte “Conexión directa con un televisor” (pág. 12).
Uso de vídeo/audio con un televisor y un equipo de audio
Consulte “Conexión con un televisor y un equipo de audio” (pág. 13).
Acerca de HDMI
Para disfrutar de vídeo de alta calidad y sonido digital a
través del terminal HDMI, utilice cables HIGH SPEED
HDMI de venta en el mercado que tenga el logotipo
HDMI (tal como se muestra en la contraportada).
Para obtener información sobre la función Control
HDMI, consulte “Control HDMI” (pág. 30).
Para cambiar el modo de salida del terminal HDMI,
configure “HDMI” (pág. 34) en Configuración de
audio.
Conexión para la reproducción de
discos Blu-ray 3D
Para utilizar discos Blu-ray 3D en este reproductor, su
sistema debe cumplir las condiciones siguientes.
Su televisor y receptor de A/V (si está disponible)
deben admitir la función 3D.
Salida 3D en Configuración de pantalla (pág. 32) se
define en “Auto”.
Conexiones de vídeo/audio
Consejos
USB
5#%&
Este reproductor
Receptor de A/V
TV
Vídeo (HDMI)Vídeo/audio
(HDMI)
Altavoces
Audio
USB
5#%&
Este reproductor
TV
Vídeo/audio
(HDMI)
USB
5#%&
Este reproductor
TV
Vídeo (HDMI)
Audio
(coaxial, óptico o analógico)
Equipo de audio
(como una barra de sonido)
Consejos
12 Es
Conexiones de vídeo/audio
Conexión con un televisor a
través de un receptor de A/V
Conecte este reproductor al receptor de A/V y el receptor
de A/V al televisor con cables HDMI.
Para más detalles sobre las conexiones de los altavoces,
consulte los manuales de instrucciones del receptor de A/V
y de los altavoces.
¡Precaución!
No conecte el cable de alimentación del
reproductor hasta haber realizado todas
las conexiones.
Conexión directa con un televisor
Conecte este reproductor al televisor con un cable HDMI.
¡Precaución!
No conecte el cable de alimentación del
reproductor hasta haber realizado todas
las conexiones.
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT
NETWORK
USB
HDMI
HDMI IN
HDMI OUT
HDMI IN
HDMI
Este reproductor
Receptor
de A/V
TV
Terminal HDMI
Altavoces
Cable HDMI
Entrada HDMI
Cable HDMI
Salida HDMI
Entrada HDMI
Conexiones de
los altavoces
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT
NETWORK
USB
HDMI
HDMI
HDMI IN
Este reproductor
TV
Terminal HDMI
Cable HDMI
Entrada HDMI
13 Es
Conexiones de vídeo/audio
Conexiones
2
Español
Conexión con un televisor y un equipo de audio
Conecte este reproductor al televisor con un cable HDMI, y este reproductor al equipo de audio con un cable de audio
(cable óptico digital, coaxial digital o de clavijas estéreo).
¡Precaución!
No conecte el cable de alimentación del reproductor hasta haber realizado todas las
conexiones.
Para cambiar el modo de salida de las tomas COAXIAL/OPTICAL, configure “Coaxial / Optica” (pág. 34) en
Configuración de audio.
Si el audio de reproducción se emite desde los altavoces del televisor y desde el equipo de audio, defina HDMI en
Configuración de audio en desactivado para desactivar la salida de audio al televisor.
Las señales de audio de SACD no se pueden emitir desde la toma COAXIAL o OPTICAL (pág. 35).
Consejos
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT
NETWORK
USB
HDMI
HDMI
HDMI IN
COAXIAL
OPTICAL
AUDIO OUT
COAXIAL OPTICALAUDIO
Este reproductor
TV
Tomas OPTICAL, COAXIAL o
AUDIO OUT L/R
Cable de audio
(cable óptico digital, coaxial
digital o de clavijas estéreo).
Entrada de audio
(óptica digital, coaxial digital o
estéreo analógica).
Equipo de audio
(como una barra de sonido)
Entrada HDMI
Cable HDMI
Salida HDMI
14 Es
Si conecta este reproductor a la red (inalámbrica o con cable), puede utilizar las funciones siguientes.
Reproducción de contenido de un servidor DLNA (PC o NAS) (pág. 19)
Reproducción de distintos contenidos del servicio de red (pág. 21)
Reproducción de discos compatibles con BD-Live (pág. 25)
Uso de este reproductor desde dispositivos móviles (AV CONTROLLER) (pág. 22)
Para utilizar los servicios de red o la función BD-Live, se necesita una conexión a Internet de banda ancha.
Consulte el manual de instrucciones de su equipo, ya que el equipo conectado y el método de conexión pueden
variar dependiendo de su entorno de red.
Emplee un cable de red/enrutador compatible con 10BASE-T/100BASE-TX.
Si utiliza un router que admite DHCP, no necesita configurar los ajustes de red para este reproductor, ya que los
parámetros de red (tales como la dirección IP) se asignarán automáticamente. Solo necesita configurar los ajustes
de red si el router no admite DHCP o si desea configurar los parámetros de red manualmente (pág. 32).
Conexión inalámbrica
Mediante el uso de la función Wi-Fi de este reproductor,
puede conectarlo a la red (router) de forma inalámbrica.
Para utilizar la función Wi-Fi, consulte “Configuración de
conexión inalámbrica” (pág. 18) y realice la configuración
de conexión inalámbrica.
Conexión con cable
Conecte este reproductor a la red (router) con un cable de
red de par trenzado blindado (STP) disponible en el
mercado.
Conexión de red
Notas
Consejo
USB
5#%&
Este reproductor
Internet Módem Router PC
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT
NETWORK
USB
HDMI
REMOTE
C
OUT
LAN
NETWORK
Este reproductor
Internet Módem Router PC
Terminal
NETWORK
Cable de red
Terminal LAN
15 Es
Conexión de red
Conexiones
2
Español
Configuración de servidor DLNA
Mediante el uso de DLNA, puede compartir contenido multimedia (como vídeos, música y fotos) almacenado en su
servidor DLNA (PC o NAS) conectado a su red, y disfrutar de ese contenido con el reproductor.
Además, puede utilizar su dispositivo móvil (como un teléfono inteligente y una tableta) como un controlador
inalámbrico para controlar este reproductor a través de la red.
Para utilizar las funciones DLNA, realice la siguiente configuración del servidor DLNA una vez realizada la conexión de
red (pág. 14).
Para utilizar funciones DLNA, todos los dispositivos deben estar conectados a la misma red.
Para utilizar un NAS como un servidor DLNA, el NAS debe ser compatible con DLNA.
Configuración de uso compartido de
medios en servidor DLNA
Para reproducir contenido multimedia almacenado en su
servidor DLNA (PC o NAS), primero debe realizar la
configuración de uso compartido de medios en el software
del servidor DLNA instalado en el servidor DLNA.
Para obtener información sobre la configuración del
servidor DLNA o los formatos de archivo admitidos
por el servidor DLNA, consulte los manuales de
instrucciones de su servidor DLNA y de su software.
1 Encienda el servidor DLNA (PC o NAS) y este
reproductor.
2 Si utiliza un PC como servidor DLNA, compruebe que
el software del servidor DLNA (como Windows Media
Player 12) está instalado en su PC.
3 En el servidor DLNA, active el uso compartido de
medios y permita que se compartan con este
reproductor.
Con esto finaliza la configuración del servidor DLNA.
Para disfrutar del contenido del servidor DLNA en este
reproductor, seleccione un servidor DLNA y un
archivo multimedia en el menú HOME (pág. 19).
Uso de un dispositivo móvil como
controlador de medios
Si tiene un dispositivo móvil (como un teléfono
inteligente y una tableta) que admite la función
Controlador multimedia digital (DMC), puede utilizar este
reproductor desde su teléfono inteligente o tableta a través
de la red.
Para permitir que el dispositivo móvil controle este
reproductor, defina Control DMC (pág. 32) en el
menú SETUP en Permitir (predeterminado).
Para comprobar si su dispositivo móvil admite la
función DMC, consulte los manuales de
instrucciones del dispositivo móvil y de su software.
Notas
USB
5#%&
DLNA
Este reproductor
Servidor DLNA
(PC o NAS)
Mando a distancia Controlador
(dispositivo móvil)
Consejo
Consejos
16 Es
Si conecta un dispositivo de memoria USB al conector USB en el panel delantero o trasero de este reproductor, puede
reproducir archivos multimedia almacenados en el dispositivo de memoria USB (pág. 19).
Yamaha no puede garantizar que los dispositivos de memoria USB de todas las marcas funcionen con este
reproductor.
Conecte un dispositivo de memoria USB a uno de los conectores USB (delantero/trasero) de este reproductor
cuando utilice la función BD-Live (pág. 26).
Conexión USB
Notas
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT
NETWORK
USB
HDMI
USB
USB
USB
Este reproductor
Conector USB
(delantero)
Este reproductor
Dispositivo de memoria
USB
Conector USB (trasero)
Dispositivo de memoria
USB
17 Es
Conexiones
2
Español
Conexión con las tomas REMOTE
CONTROL
Puede transmitir y recibir las señales del mando a
distancia conectando a las tomas REMOTE
CONTROL (OUT/IN).
Conecte con firmeza cables con mini clavija mono
de 3,5 mm (de venta en el mercado) en las tomas
REMOTE CONTROL (OUT/IN).
Si su receptor de A/V es un producto Yamaha y tiene
la capacidad de transmitir señales de control SCENE
desde la toma REMOTE OUT, puede controlar el
reproductor con la función SCENE.
¡Precaución!
No conecte el cable de alimentación del
reproductor hasta haber realizado todas
las conexiones.
Para ver más detalles sobre la función SCENE,
consulte el manual de instrucciones suministrado
con su receptor de A/V Yamaha.
Puede conectar un componente Yamaha (como por
ejemplo un reproductor de CD) que sea compatible
con la función SCENE a la toma REMOTE
CONTROL (OUT) de este reproductor.
Conexión del cable de
alimentación
Después de realizar todas las conexiones, enchufe el
cable de alimentación suministrado a la toma AC IN
de la parte trasera del reproductor. A continuación
enchúfelo en una toma de CA.
Otras conexiones
NETWORK
USB
REMOTE CONTROL
OUT IN
REMOTE CONTROL IN
REMOTE CONTROL OUT
Este reproductor
A la toma
REMOTE
CONTROL (IN)
Cable con mini clavija
mono de 3,5 mm (de
venta en el mercado)
Componente Yamaha
A la toma
de entrada
del mando
a distancia
Cable con mini
clavija mono de
3,5 mm (de venta
en el mercado)
Receptor de señales
infrarrojas o componente
Yamaha (por ejemplo, un
receptor de A/V)
A la toma
REMOTE
CONTROL
(OUT)
A la toma
de salida
del mando
a distancia
Consejos
AC IN
A la toma de CA
18 Es
REPRODUCCIÓN
Configuración con la
Configuración Sencilla
La Configuración Sencilla le permite definir fácilmente el
idioma, la resolución y la relación de aspecto de la pantalla.
La pantalla de la Configuración Sencilla aparece la primera
vez que enciende este reproductor después de comprarlo.
La misma configuración se puede realizar desde el menú
SETUP
=
Sistema
=
Configuración Sencilla.
1
Cuando aparezca la pantalla Configuración Sencilla, pulse
ENTER
para empezar con la Configuración Sencilla.
2 Defina el idioma, la resolución y la relación de aspecto
de la pantalla siguiendo los mensajes que aparecen en
pantalla.
Si no aparece la imagen tras completar la
Configuración Sencilla, consulte “Resolución de
problemas” (pág. 39).
Aparecerá un mensaje de advertencia acerca de la
reproducción de vídeo en 3D al encender este
reproductor. Pulse ENTER para descartar el mensaje
o CLEAR para desactivarlo (pág. 30).
Configuración de conexión
inalámbrica
Para conectar este reproductor a su red (router) de forma
inalámbrica, siga el procedimiento siguiente para realizar
la configuración de conexión inalámbrica.
Si su router (punto de acceso) admite la función WPS
(Wi-Fi Protected Setup), puede utilizar el método de
configuración automática para conectar este reproductor
al router sin necesidad de introducir información de red
(como SSID) manualmente.
1
Pulse
SETUP
para mostrar la pantalla del menú SETUP.
2 Seleccione Configuración General = Red =
Configuración de conexión = Inalámbrico.
3 Pulse 2/3 para seleccionar Sí y, a continuación, pulse
ENTER.
4
Pulse
2/3
para seleccionar uno de los siguientes métodos
de configuración y, a continuación, pulse
ENTER
.
Buscar Redes: Seleccione esta opción para buscar
redes inalámbricas disponibles. Cuando se muestre la lista
de redes, seleccione el SSID que se va a conectar e
introduzca la contraseña.
Manual: Seleccione esta opción para introducir la
información de red (como el SSID) manualmente.
Auto: Seleccione esta opción para utilizar la función
WPS. Seleccione PBC (configuración de botón de
comando) o el método de código PIN y siga los mensajes
que aparecen en la pantalla.
Para ver información detallada sobre el
funcionamiento de su router (punto de acceso),
consulte el manual de instrucciones correspondiente.
Si la función WPS no funciona, seleccione “Buscar
Redes” o “Manual” para realizar la configuración de
conexión inalámbrica.
Los dispositivos que funcionan en la banda de
frecuencias de 2,4 GHz, como los hornos
microondas, dispositivos Bluetooth o dispositivos
digitales inalámbricos, pueden llegar a interrumpir la
comunicación. Aleje el reproductor de estos
dispositivos o apáguelos.
La velocidad de una conexión de red inalámbrica
depende de su entorno de red (tipo de router,
distancia entre el router y este reproductor,
ubicaciones de instalación, etc.). En caso de que el
sonido o el vídeo se interrumpa durante la
reproducción, acerque este reproductor al router o
cambie la orientación de este reproductor o de la
antena del router.
Ajustes iniciales
Notas
Notas
19 Es
Reproducción
3
Español
El menú HOME le permite realizar las siguientes operaciones básicas de este reproductor.
Búsqueda y reproducción de archivos multimedia en distintos discos, dispositivos de memoria USB y sus
servidores DLNA (PC o NAS)
Acceso a diversos servicios de red (pág. 21)
Visualización del menú SETUP (pág. 27)
Para obtener información sobre los discos y formatos que se pueden reproducir, consulte la página 3.
Para reproducir contenido del servidor DLNA en este reproductor, también se debe realizar la configuración de uso
compartido de medios (pág. 15) en el servidor DLNA.
Reproducción de fotos/música/vídeo
Funcionamiento básico
2/3/5/a: Permite mover la selección.
2: Permite volver a la carpeta principal.
HOME: Permite entrar/salir de la pantalla del menú
HOME.
ENTER: Confirma la carpeta/archivo.
Operaciones comunes para la
reproducción de archivos en una
carpeta seleccionada
Ejemplo: Selección de un archivo de película en un
dispositivo de memoria USB
Detenga la reproducción del vídeo antes de
desplazarse a la pantalla del menú HOME.
1 Pulse HOME para ir a la pantalla del menú HOME.
2 Pulse 5/a para seleccionar el elemento que contiene
el archivo que desea reproducir y, a continuación, pulse
ENTER.
Si su servidor DLNA no aparece en la lista,
compruebe que el servidor DLNA está activado y
seleccione Buscar DLNA para actualizar la lista.
3 Seleccione la carpeta de Foto, Música, Vídeo o
AVCHD que desea reproducir y, a continuación, pulse
ENTER.
Para volver a la carpeta principal, pulse RETURN o
seleccione .
Menú HOME
Consejos
Nota
MIRACAST
PIP
HOME
2ND
AUDIO
ENTER
TOP MENU
RETURN ON SCREEN
POP-UP MENU
SETUP
Nota
Continúa en la página siguiente. \
20 Es
Menú HOME
Tenga en cuenta que en el siguiente paso solo se
mostrarán los archivos del tipo que seleccione en
este paso. Por ejemplo, si selecciona la carpeta Foto
en este paso, solo se mostrarán archivos de fotos
después de este paso.
4 Seleccione la carpeta que contiene el archivo que desea
reproducir.
5 Seleccione el archivo que desea reproducir y, a
continuación, pulse ENTER.
Si selecciona un archivo de vídeo, se inicia la
reproducción.
Si selecciona un archivo de música, se muestra la
pantalla de estado y se inicia la reproducción.
Si selecciona un archivo de fotos, se inicia el pase de
diapositivas.
Para disfrutar del pase de diapositivas con música,
pulse HOME para volver a la pantalla del menú
HOME mientras se reproduce la música y seleccione
un archivo de fotos.
Es posible que el archivo mostrado no se reproduzca
dependiendo del contenido.
Operaciones para la visualización de
fotos
Durante la visualización de fotos, los botones del mando a
distancia funcionan como se indica a continuación.
: Detiene el pase de diapositivas y vuelve al explorador
de archivos.
: Establece una pausa en un pase de diapositivas.
: Reproduce un pase de diapositivas.
: Pasa a la fotografía siguiente.
: Pasa a la fotografía anterior.
: Aumenta la velocidad de un pase de diapositivas en
3 pasos.
: Reduce la velocidad de un pase de diapositivas en 3
pasos.
5: Invierte una foto.
a: Muestra la foto reflejada.
2: Gira una foto en sentido contrario a las agujas del
reloj.
3: Gira una foto en el sentido de las agujas del reloj.
ZOOM: Amplía/reduce una foto (ampliar/reducir zoom: 3
pasos cada uno).
5/a/2/3: Permite desplazarse en modo de zoom
cuando la foto es mayor que la pantalla.
Nota
Consejo
Nota
21 Es
Reproducción
3
Español
Puede disfrutar de contenido multimedia (como fotos y vídeos) utilizando los siguientes servicios de red.
Dropbox
Álbumes Web de Picasa
YouTube
El acceso a contenidos suministrados por terceros requiere una conexión a Internet de alta velocidad y, a veces,
también un registro de cuenta y una suscripción de pago.
Los servicios de contenidos de terceros pueden modificarse, suspenderse, interrumpirse o dejar de proporcionarse
en cualquier momento sin previo aviso, y Yamaha no asume ninguna responsabilidad en este sentido.
Es posible que parte de los contenidos solo estén disponibles en algunos países y que se presenten en idiomas
específicos.
Yamaha no garantiza que los servicios de contenidos se seguirán proporcionando ni estarán disponibles durante un
periodo de tiempo concreto y rechaza cualquier garantía de este tipo, ya sea expresa o implícita.
1 Pulse HOME para ir a la pantalla del menú HOME.
Para ir directamente a la pantalla del menú
YouTube, pulse YouTube.
2 Pulse 5/a para seleccionar Servicios de red y, a
continuación, pulse ENTER.
3 Pulse 2/3/5/a para seleccionar el servicio de red
deseado y, a continuación, pulse ENTER.
4 Pulse 2/3/5/a para seleccionar un elemento y, a
continuación, pulse ENTER para confirmar la
selección (o iniciar la reproducción).
Para salir de cada servicio de red, pulse HOME.
Los procedimientos de funcionamiento después del
paso 4 varían en función de los elementos de menú
proporcionados por cada servicio.
Acerca de Dropbox™
Dropbox es un servicio de red que le permite poner su
contenido en Dropbox y obtenerlo de sus ordenadores,
teléfonos o tabletas. Agrega automáticamente fotos y
muestra vídeo desde cualquier lugar.
Más información en www.dropbox.com
Acerca de álbumes Web de
Picasa™
Álbumes Web de Picasa es un servicio de red que permite
a los usuarios compartir fotos con amigos y familia o
explorar fotos públicas.
Más información en picasaweb.google.com
Acerca de YouTube™
YouTube es un servicio de red que permite a los usuarios
descubrir, ver y compartir vídeos de creación original a
través de Internet.
Más información en www.youtube.com
Uso de servicios de red
Notas
Consejo
Consejo
Nota
Dropbox es una marca comercial de Dropbox Inc.
Picasa y el logotipo de Picasa son marcas comerciales de
Google. Inc.
YouTube y el logotipo de YouTube son marcas
comerciales de Google. Inc.
22 Es
Miracast es una solución para una perfecta visualización de vídeo entre dispositivos, sin cables ni una conexión de red a
través de un punto de acceso (Wi-Fi Direct). Puede realizar distintas acciones, como ver imágenes desde un dispositivo
compatible con Miracast (teléfono inteligente, etc.) en la pantalla del televisor conectado a este reproductor.
Para comprobar si su dispositivo es compatible con Miracast, consulte el manual de instrucciones del dispositivo.
Cuando Miracast está activado en este reproductor, otras funciones de red (como DLNA) no están disponibles.
1 Pulse MIRACAST.
2 Utilice su teléfono inteligente en los 60 segundos
siguientes para activar Miracast y seleccione este
reproductor como el dispositivo que se va a conectar.
Para ver información detallada sobre el funcionamiento
de su teléfono inteligente, consulte el manual de
instrucciones correspondiente.
3 Para salir de Miracast, pulse MIRACAST.
También puede salir de Miracast pulsando HOME o
RETURN.
Mediante la aplicación “AV CONTROLLER” de su dispositivo móvil, puede utilizar dicho dispositivo como mando a
distancia para manejar este reproductor.
Puede controlar las funciones básicas de reproductores Blu-ray Disc™ Yamaha como la reproducción, la pausa, el
salto, el encendido y la navegación de los cursores.
La aplicación “AV CONTROLLER” está disponible en distintos idiomas.
Para obtener más información sobre “AV CONTROLLER”, visite el sitio web de Yamaha.
Uso de imágenes y vídeos de teléfonos inteligentes
en la pantalla del televisor (Miracast™)
Notas
USB
5#%&
Dispositivo compatible
con Miracast
(teléfono inteligente, etc.)
Este reproductor
TV
Consejo
En función del entorno, es posible que el audio/vídeo se interrumpa o que se produzcan interferencias en la pantalla
del televisor. En tal caso, pruebe las soluciones siguientes.
Acerque el dispositivo Miracast a este reproductor.
Apague los demás dispositivos inalámbricos que no esté utilizando.
Aleje el dispositivo Miracast y este reproductor de hornos microondas, dispositivos Bluetooth u otros
dispositivos inalámbricos.
Uso de este reproductor desde dispositivos móviles
(AV CONTROLLER)
AV CONTROLLER
23 Es
Reproducción
3
Español
En este capítulo se explica la reproducción de discos
Blu-ray Disc, DVD, SA-CD y CD de venta en el mercado,
así como de discos DVD-RW/R grabados.
Para conocer las funciones básicas de reproducción,
consulte la página 8.
Menú en pantalla
Para mostrar el menú en pantalla, pulse ON SCREEN. A
continuación, pulse 5/a/2/3 para seleccionar una
opción y, después, pulse ENTER para utilizar la función
deseada.
El menú en pantalla consta de las siguientes opciones.
Título : Muestra el número del
título que se está reproduciendo. Puede ir al título deseado
seleccionándolo desde esta opción.
Capítulo : Muestra el número del
capítulo que se está reproduciendo. Puede ir al capítulo
deseado seleccionándolo desde esta opción.
Pista/Archivo :
Muestra el número de la pista o archivo que se está
reproduciendo. Puede ir a la pista o al archivo deseado
seleccionándolo desde esta opción.
Hora : Muestra el
tiempo de reproducción. Seleccione el tipo de
visualización entre las siguientes posibilidades:
Tiempo de reproducción transcurrido del título,
capítulo, disco, pista o archivo
Tiempo de reproducción restante del título, capítulo,
disco, pista o archivo
Modo/Modo de reproducción
: Muestra el
modo de reproducción actual. Puede seleccionar uno de
los modos de reproducción siguientes:
Normal: Reproducción normal.
Shuffle: Reproducción aleatoria sin repetición.
Aleatorio: Reproducción aleatoria con repetición.
Normal
Shuffle CH (capítulo)
Shuffle TT (título)
Shuffle All
Aleatorio CH (capítulo)
Aleatorio TT (título)
Aleatorio All
Normal
Shuffle F (carpeta)
Aleatorio F(carpeta)
Audio : Muestra el idioma/señal de
audio del Blu-ray Disc/DVD seleccionado. Puede
seleccionar el tipo de audio deseado.
Ángulo : Muestra el número del ángulo
seleccionado en ese momento. Si el vídeo se ha grabado
con varios ángulos, puede cambiar el ángulo.
Subtítulo : Muestra el idioma de
los subtítulos seleccionados actualmente si hay subtítulos.
Estilo subtítulos : Muestra el estilo de los
subtítulos seleccionados. Esta función solo está disponible
para subtítulos externos de archivo de vídeo. Puede
seleccionar el estilo de texto deseado de los subtítulos.
Bitrate : Muestra el
bitrate de la señal de audio/vídeo.
Video secundario : Activa o desactiva PIP
(pág. 8).
Audio Secundario : Activa o
desactiva el audio
secundario (pág. 8).
Búsqueda Ins
: Salta 30 segundos.
Repetición Ins
: Reproduce el
contenido desde 10 segundos antes.
Seleccionar CC
: Define los subtítulos mostrados.
Pase de diapositivas :
Muestra la velocidad del pase de diapositivas. Puede
seleccionar la velocidad del pase de diapositivas entre
Lento/Medio/Rápido.
Transición : Muestra cómo aparece la foto en
la pantalla. Puede seleccionar el tipo de transición.
Code Page : Permite seleccionar el código de
caracteres de los subtítulos que ha agregado al vídeo DivX
(pág. 41).
Funciones avanzadas de reproducción
Nota
BD
DVD
BD
DVD
CD
MUSIC
PHOTO
BD
DVD
CD
DVD
CD
PHOTO
CD
DVD
VIDEO MUSIC PHOTO
BD DVD
BD
DVD
BD
DVD
VIDEO
BD
BD
DVD
CD
BD
BD
BD DVD CD VIDEO MUSIC
BD DVD CD VIDEO MUSIC
BD DVD
PHOTO
PHOTO
VIDEO
24 Es
Funciones avanzadas de reproducción
Menú de estado
Muestra varios ajustes, cómo los subtítulos, el ángulo y el
número de título/capítulo/pista reproducido. Para mostrar
el menú de estado, pulse STATUS. El menú de estado
consta de los siguientes menús.
Ejemplo: Iconos cuando se reproduce un Blu-ray Disc
1 (Estado de reproducción)
2 (Icono de tipo de disco/archivo de vídeo)
3 (Número de título que se reproduce): Puede
saltar al título especificado con la tecla SEARCH
(pág. 9).
4 (Número de capítulo que se reproduce):
Puede saltar al capítulo especificado con la tecla
SEARCH (pág. 9).
5 (Tiempo de reproducción transcurrido):
Puede saltar al punto especificado con la tecla
SEARCH (pág. 9).
6
(Modo repetición):
Muestra el modo repetición
actual (pág. 8).
7 (Audio seleccionado actualmente): Puede
cambiar el formato o idioma de audio con la tecla
AUDIO.
8 (Subtítulos seleccionados actualmente):
Puede cambiar el idioma de los subtítulos con la tecla
SUBTITLE.
Ejemplo: Iconos cuando se reproduce un archivo de
música
1 (Estado de reproducción)
2
(Modo repetición):
Muestra el modo repetición
actual (pág. 8).
3 (Icono de tipo de disco/archivo de música)
4 (Gráficos) : Muestra gráficos si están
contenidos en el archivo.
5 (Número de pista/archivo que se
reproduce): Puede saltar a la pista especificada con
la tecla SEARCH (pág. 9).
6 (Información) : Muestra información
musical si está contenida en el archivo.
7 (Tiempo de reproducción transcurrido):
Puede saltar al punto especificado con la tecla
SEARCH (pág. 9).
8 (Barra de progreso) : Muestra el estado de
progreso de la canción actual.
1 (Estado de reproducción)
2 (Icono de archivo de fotos)
3 (Número del archivo mostrado)
4
(Modo repetición):
Muestra el modo repetición
actual (pág. 8).
5 (Velocidad de pase de diapositivas)
BD
DVD
VIDEO
1 2 3 4 5
6 7 8
DVD
CD
MUSIC
MUSIC
PHOTO
1 2 3 4 5
25 Es
Funciones avanzadas de reproducción
Reproducción
3
Español
Programación de la
reproducción
Esta opción le permite programar el orden de
reproducción de las pistas de un disco de audio o de los
capítulos de un DVD.
Pulse PROGRAM durante la reproducción para mostrar
la ventana PROGRAMA para programar el orden de
reproducción.
Puede programar hasta 15 pistas/capítulos.
Ejemplo: Programación del orden de reproducción de
pistas de CD
1 Pulse PROGRAM durante la reproducción.
2 Pulse ENTER para programar el orden de
reproducción.
En un disco de audio, pulse 5/a para seleccionar una
pista y, a continuación, pulse ENTER.
En un disco DVD-Video, seleccione un título (indicado
como TT) y un capítulo (indicado como CH) en lugar
de una pista.
Para borrar una pista configurada, seleccione la pista
que desea borrar y, a continuación, pulse CLEAR.
Pulse RETURN para cancelar la reproducción del
programa.
3 Una vez finalizada la programación, pulse para
definir e iniciar la reproducción del programa.
4 Para cancelar la reproducción del programa, detenga la
reproducción por completo pulsando .
Uso de la búsqueda
Esta opción le permite ir a un punto específico durante la
reproducción.
1 Pulse SEARCH durante la reproducción. Aparece la
barra de estado.
2 Pulse 5/a/2/3 para seleccionar una de las opciones
siguientes y, a continuación, pulse ENTER.
:
Número de título (indicado con )
Número de capítulo (indicado con )
Tiempo de título transcurrido (indicado con )
Tiempo de capítulo transcurrido (indicado con )
:
Número de pista (indicado con )
Tiempo de pista transcurrido (indicado con )
Tiempo de disco transcurrido (indicado con )
:
Número de archivo (indicado con )
Tiempo de archivo transcurrido (indicado con )
:
Número de archivo (indicado con )
3 Pulse 5/a o los botones numéricos para definir o
ajustar el valor de la opción seleccionada y pulse
ENTER para ir al punto especificado.
4 Para cerrar la barra de estado, pulse STATUS.
Uso de BONUSVIEW™ y BD-
Live™
Este reproductor admite las funciones de reproducción de
BONUSVIEW (pág. 41) (BD-ROM Perfil 1 versión 1.1) y
BD-Live (pág. 41) (BD-ROM Perfil 2).
Las funciones y el método de reproducción varían
según el disco. Siga las indicaciones del disco o del
manual de usuario suministrado.
DVD CD
Nota
BD
DVD
CD
MUSIC
PHOTO
BD DVD
CD
VIDEO MUSIC
PHOTO
26 Es
Funciones avanzadas de reproducción
Utilización de la función Imagen
en Imagen (reproducción de
audio/vídeo secundario)
El Vídeo BD que incluye audio y vídeo secundario
compatible con Imagen en Imagen se puede reproducir
con audio y vídeo secundario simultáneamente como un
vídeo pequeño en la esquina.
Mientras se muestra Marca PIP ( ) o
Marca Audio Secundario ( ), pulse
PIP para activar o desactivar la
función Imagen en imagen.
Para escuchar audio secundario, asegúrese de que el
ajuste Salida de audio (Coaxial / Optica o HDMI) se
ha definido en PCM o Recodificar (pág. 34).
Dependiendo del disco, para escuchar audio
secundario, es posible que tenga que activar el audio
secundario desde el menú principal del disco
(pág. 9).
Dependiendo del contenido, el audio y el vídeo
secundario para Imagen en Imagen pueden
reproducirse y desaparecer automáticamente.
Además, puede haber restricciones con respecto a las
áreas que pueden reproducirse.
Utilización de la función BD-
Live™
1. Ajuste la configuración de red
(pág. 31).
2. Conecte el dispositivo de memoria
USB al reproductor (pág. 16).
Los datos de BD-Live se guardan en un dispositivo de
memoria USB conectado a este reproductor. Para
utilizar estas funciones, conecte un dispositivo de
memoria USB que admita USB 2.0 de alta velocidad
(480 Mbit/s) a uno de los conectores USB (delantero/
trasero) de este reproductor para utilizar el dispositivo
de memoria USB como Almacenamiento Local.
Almacenamiento Local se utiliza como memoria
auxiliar cuando se reproduce un Blu-ray Disc.
Utilice un dispositivo de memoria USB con, por lo
menos, 2 GB de espacio libre.
La carpeta BUDA se crea automáticamente en el
dispositivo de memoria USB cuando es necesario.
Si el espacio de almacenamiento es insuficiente, los
datos no se copiarán/descargarán. Elimine datos
innecesarios o utilice un dispositivo de memoria
USB nuevo.
La carga de los datos (lectura/escritura) puede llevar
un tiempo.
Yamaha no puede garantizar que los dispositivos de
memoria USB de todas las marcas funcionen con
este reproductor.
No utilice un cable de extensión USB cuando
conecte un dispositivo de memoria USB al conector
USB del reproductor. El uso de un cable de
extensión USB puede impedir que el reproductor
funcione correctamente.
3. Reproduzca el disco.
4. Ejecute BD-Live siguiendo las
instrucciones del disco.
No retire el dispositivo de memoria USB ni
desconecte el cable de alimentación durante el
funcionamiento de BD-Live.
En relación con el método de reproducción de
contenido BD-Live, etc., lleve a cabo las
operaciones de acuerdo con las instrucciones del
manual del Blu-ray Disc.
Para utilizar las funciones de BD-Live, realice la
conexión de red (pág. 14) y la configuración de red
(pág. 31).
Consulte “Conexión BD-Live” (pág. 32) para
obtener información sobre la configuración para
restringir el acceso a contenido BD-Live.
El tiempo que se necesita para descargar los
programas ofrecidos al dispositivo de memoria USB
conectado a este reproductor depende de las
velocidades de conexión a Internet y del volumen de
datos de los programas.
Es posible que los programas BD-Live
suministrados a través de Internet no puedan mostrar
la conexión dependiendo del estado (actualización)
del proveedor. En este caso, extraiga el disco y
vuelva a intentarlo.
Si la pantalla BD-Live no aparece durante un rato
después de seleccionar la función BD-Live en el
menú del Blu-ray Disc, es posible que el dispositivo
de memoria USB no tenga suficiente espacio libre.
En este caso, expulse el disco del reproductor y, a
continuación, borre los datos del dispositivo de
memoria USB utilizando el menú “Formato” de
“Almacenamiento Local” (pág. 30).
Notas
Vídeo principal Vídeo secundario
Notas
Notas
27 Es
Ajustes
4
Español
AJUSTES
El menú SETUP permite realizar diversos ajustes y configuraciones audiovisuales en las funciones utilizando el mando a
distancia.
Menú SETUP
Menú/submenú Opción Función
Página
Configuración
General
Sistema Standby Automático Activa o desactiva la función de ahorro de energía. 30
Control HDMI Configura el reproductor para que reciba la señal de control
desde el mando a distancia de su televisor/receptor de A/V.
30
Cargar configuracion
por defecto
Restablece todos los ajustes a los valores predeterminados,
excepto el ajuste Seguridad.
30
Actualizar Aplica la actualización del reproductor. 30
Notificacion de
actualización
Permite seleccionar si mostrar el mensaje en la pantalla
cuando este reproductor detecta software más reciente a
través de Internet.
30
Mensaje
Reproducción 3D
Muestra un mensaje de advertencia acerca de la
reproducción de vídeo en 3D al encender este reproductor.
30
Almacenamiento
Local
Muestra el espacio libre del dispositivo de memoria USB
conectado a este reproductor, o formatea la carpeta
“BUDA” en el dispositivo de memoria USB.
30
Configuración
Sencilla
Ajusta el idioma, la resolución y la relación de aspecto de la
pantalla.
30
Idioma OSD Selecciona el idioma del menú en pantalla. 30
Menú Permite dar prioridad al idioma del menú del disco. 31
Audio Permite dar prioridad al idioma del audio. 31
Subtítulo Permite dar prioridad al idioma de los subtítulos. 31
Reproducción Reproducción
Automática Disco
Ajusta el reproductor para que inicie automáticamente la
reproducción del disco.
31
Marca de Angulo Permite mostrar la Marca de Angulo cuando se reproduce
Blu-ray Disc/DVD con varios ángulos.
31
Marca PIP Permite mostrar la Marca PIP cuando se reproduce Blu-ray
Disc/DVD con Imagen en Imagen.
31
Marca Audio
Secundario
Permite mostrar la Marca Audio Secundario cuando se
reproduce Blu-ray Disc/DVD con audio secundario.
31
Memoria última
Configura este reproductor para que recuerde la última posición
de reproducción de un disco (vídeo Blu-ray o DVD) cuando se
pone en modo de espera o si se abre la bandeja portadiscos.
31
DivX (R) VOD DRM Muestra el código de registro del vídeo DivX(R). 31
Subtítulo DivX® Permite seleccionar si mostrar un subtítulo para el vídeo
DivX(R).
31
Seguridad Cambiar Contraseña Permite cambiar la contraseña de Control Paterno y Código
de país.
31
Control Paterno
Establece el Control Paterno en función del contenido del disco.
31
Código de país Establece el Código de país. 31
Red Configuración de
conexión
Permite definir un método de conexión de red.
31
Información Muestra la pantalla de información de red. 31
Prueba de conexión Realiza la prueba de conexión de red. 32
Configuración IP Permite definir la configuración IP en Auto/Manual. 32
Configuración Proxy Permite definir la configuración proxy. 32
Control de Red Permite definir el control de los dispositivos conectados a
través de Ethernet entre Activar/Desactivar.
32
Standby de red Permite seleccionar si este reproductor se puede activar
desde otros dispositivos de red.
32
Control DMC Permite seleccionar si permitir que el Controlador
multimedia digital (DMC) compatible con DLNA (pág. 15)
controle este reproductor.
32
Conexión BD-Live Permite definir la conexión BD-Live en Autorizada/
Permitida Parcialmente/Prohibido.
32
28 Es
Menú SETUP
Configuración de
pantalla
TV Salida 3D Selecciona vídeos en 3D o 2D. 32
Pantalla de TV Ajusta la relación de aspecto de la pantalla del televisor
conectado y ajusta la salida de vídeo.
32
Resolución HDMI Permite seleccionar la resolución de salida de vídeo HDMI. 33
Sistema de TV Permite seleccionar el sistema de TV entre NTSC/PAL/
Multi.
33
Color Space Permite seleccionar Color Space entre YCbCr 4:4:4/YCbCr
4:2:2/Full RGB/RGB.
33
HDMI Deep Color Permite seleccionar HDMI Deep Color entre 30 bits/36 bits/
48 bits/Desactivar.
33
HDMI 1080p 24Hz Activa o desactiva HDMI 1080p 24Hz. 33
Procesamiento
de Video
Reducción de ruido Ajusta el nivel de Reducción de ruido. 33
Modo desentrelazado Ajusta cómo detectar la señal de vídeo. 33
Subtítulos Atributo CC Ajusta el aspecto de los subtítulos. 33
Color Fuente
Tamaño fuente
Estilo fuente
Opacidad fuente
Borde fuente
Color borde fuente
Color BG
Opacidad BG
Color ventana
Opacidad ventana
Personaliza la fuente, el fondo y la ventana utilizados para
los subtítulos cuando Atributo CC se define en
Personalizado.
33
Configuración de
audio
Salida de audio Coaxial / Optica Permite seleccionar el modo de salida de la toma
COAXIAL/terminal OPTICAL
entre Bitstream/PCM/Recodificar/Desactivar.
34
HDMI Permite seleccionar el modo de salida del terminal HDMI
entre Bitstream/PCM/Recodificar/Desactivar.
34
Downsampling Permite seleccionar la frecuencia de submuestreo de la señal
de audio digital entre 48K/96K/192K.
34
DRC Define el valor de DRC (Compresión de gama dinámica). 34
Salida SACD Prioridad SACD Selecciona la prioridad de reproducción de los contenidos de
2 canales o multicanal, si el disco contiene los dos tipos de
contenidos.
34
Capa SACD/CD Permite seleccionar la capa que se va a reproducir cuando se
reproduce un disco híbrido SA-CD/CD.
34
Ajuste de altavoz Mezcla descendente 2
Canales
Establece la salida de audio de la toma AUDIO OUT L/R.
34
Post-
procesamiento
Mezcla ascendente Convierte la señal de audio de 2 canales en multicanal.
34
Sistema de
Información
Muestra la versión de software y la dirección MAC
(pág. 42).
34
Menú/submenú Opción Función
Página
29 Es
Menú SETUP
Ajustes
4
Español
Ejemplo de funcionamiento del
menú SETUP
Debe acceder a la pantalla del menú SETUP para realizar
ajustes en el reproductor. A continuación se explican las
operaciones básicas del menú SETUP.
Ejemplo: Configuración de Reproducción Automática
Disco
Algunas opciones no se pueden ajustar durante la
reproducción. En este caso, pulse para detener la
reproducción completamente antes de realizar el
ajuste.
1. Muestre la pantalla del menú
SETUP.
Pulse SETUP para mostrar la pantalla del menú
SETUP.
Pulse 2/3 para seleccionar Configuración General
y, a continuación, pulse ENTER o a.
2. Seleccione un submenú.
Pulse 5/a para seleccionar Reproducción y, a
continuación, pulse ENTER o el cursor 3.
3. Seleccione una opción del menú.
Pulse 5/a para seleccionar Reproducción
Automática Disco y, a continuación, pulse ENTER
o el cursor 3.
4. Seleccione el ajuste deseado.
Pulse 5/a para seleccionar Activar o Desactivar y, a
continuación, pulse ENTER.
Debe utilizar los botones numéricos para introducir
números (como una contraseña) para algunas
opciones del menú.
5. Salga de la pantalla del menú.
Pulse 2 para volver al menú anterior.
Nota
REPEAT A/B
AUDIO
SUBTITTLE
ANGLE
SEARCH
MIRACAST
CLEAR
PIP
HOME
2ND
AUDIO
ENTER
TOP MENU
RETURN ON SCREEN
POP-UP MENU
SETUP
STATUSSETUP
Consejo
30 Es
Menú SETUP
Configuración General
Los ajustes predeterminados están marcados con “
*
”.
Sistema
Standby Automático
Activa o desactiva la función de ahorro de energía.
Cuando se activa, el reproductor pasará al modo de
protector de pantalla si no se utiliza durante 5 minutos.
Posteriormente, el reproductor pasará al modo de espera
cuando no se utilice durante 15 minutos.
Activar
*
, Desactivar
Control HDMI
Puede ajustar el reproductor para que reciba una señal de
control desde un televisor/receptor de A/V compatible con la
función Control HDMI a través de un cable HDMI (pág. 11).
Activar, Desactivar
*
Cargar configuracion por defecto
Puede restablecer todos los ajustes de este reproductor al
ajuste predefinido, excepto el ajuste Seguridad (pág. 31).
Para obtener información sobre los ajustes
predeterminados, consulte las páginas 27–34.
Actualizar
Puede actualizar el software manualmente desde
Almacenamiento USB o Red. Para obtener información
sobre la actualización de software, consulte
“Actualización de software” (pág. 37).
Notificacion de actualización
Puede seleccionar si mostrar el mensaje en la pantalla
cuando este reproductor detecta software más reciente a
través de Internet.
Activar
*
, Desactivar
Mensaje Reproducción 3D
Puede activar o desactivar la visualización de un mensaje
de advertencia acerca de la reproducción de vídeo en 3D
en el televisor al encender este reproductor.
Activar
*
, Desactivar
Almacenamiento Local
Puede comprobar el espacio libre del dispositivo de
memoria USB conectado a este reproductor, o formatear
(vacía) la carpeta “BUDA” en el dispositivo de memoria
USB conectado a este reproductor seleccionando Formato.
Para utilizar la función BD-Live (pág. 26), necesita
conectar un dispositivo de memoria USB (con, por
lo menos 2 GB de espacio libre) a uno de los
conectores USB (delantero/trasero) de este
reproductor para utilizar el dispositivo de memoria
USB como Almacenamiento Local.
Configuración Sencilla
Puede realizar la Configuración Sencilla (pág. 18).
Idioma
OSD
Puede seleccionar el idioma de pantalla, es decir, del
menú o los mensajes mostrados en pantalla como, por
ejemplo, el menú SETUP.
English, Français, Español, Deutsch, Italiano, Svenska,
Nederlandse, Polski, Русский, 中文
Uso de la función Control HDMI
Con la función Control HDMI, puede controlar de
forma interactiva este reproductor con su televisor (si es
compatible con la función Control HDMI).
Cuando se conecta el reproductor a un televisor compatible
con la función Control HDMI mediante un cable HDMI y
se activa el Control HDMI en el menú SETUP (pág. 30),
pueden realizarse las funciones indicadas a continuación.
Función de selección de entrada automática
Cuando inicie la reproducción en este reproductor, el
selector de entrada del televisor (y de un receptor A/V
si este reproductor está conectado con el televisor
mediante un receptor A/V) pasará automáticamente a
este reproductor. La alimentación del televisor se
enciende automáticamente dependiendo del televisor.
Función de apagado automático
Si apaga el televisor cuando este reproductor está en
modo de parada y no se visualiza la pantalla del menú
SETUP, este reproductor también se apagará
automáticamente.
Es posible que la función Control HDMI no
funcione correctamente dependiendo del televisor.
Otras funciones, aparte de las que se han
mencionado anteriormente, pueden funcionar
según el televisor o receptor A/V.
Para poder utilizar la función Control HDMI,
configure los ajustes de la función Control HDMI
en TODOS los componentes (este reproductor, el
televisor y el receptor de A/V). Es posible que
también sean necesarias determinadas operaciones.
Cada función se puede configurar de forma
independiente para que se active o desactive según
el televisor.
Consulte los detalles relacionados con la
configuración en los manuales de funcionamiento que
se proporcionan con el televisor y/o el receptor A/V.
Cuando está activado, el consumo de energía
durante el modo de espera aumenta por la función
Control HDMI.
Notas
Consejo
31 Es
Menú SETUP
Ajustes
4
Español
Menú
Puede dar prioridad al idioma del menú del disco.
English, Français, 中文 , Español, Deutsch, Italiano,
Nederlandse, Portugués, Danés, Svenska, Finlandés,
Noruego, Polski, Русский, Corea, Japonés, Más
Audio
Puede dar prioridad al idioma del audio para la
reproducción de Blu-ray Disc/DVD. Para obtener
información sobre la configuración de las opciones,
consulte “Menú” (pág. 31).
Subtítulo
Puede dar prioridad al idioma de los subtítulos.
English, Français, 中文 , Español, Deutsch, Italiano,
Nederlandse, Portugués, Danés, Svenska, Finlandés,
Noruego, Polski, Русский, Corea, Japonés, Más, Desactivar
(Los ajustes predeterminados de [Idioma] varían en
función del modelo).
Reproducción
Reproducción Automática Disco
Puede activar o desactivar la Reproducción Automática
Disco. Cuando se activa, el disco se reproducirá
automáticamente después de cargarlo.
Activar
*
, Desactivar
Marca de Angulo
Puede mostrar la Marca de Angulo ( ) cuando se
reproduce Blu-ray Disc/DVD con varios ángulos.
Activar
*
, Desactivar
Marca PIP
Puede definir la visualización de la Marca PIP ( )
cuando se reproducen Blu-ray Disc con Imagen en Imagen
(pág. 26).
Activar
*
, Desactivar
Marca Audio Secundario
Puede definir la visualización de la Marca Audio
Secundario ( ) cuando se reproducen Blu-ray Disc con
audio secundario.
Activar
*
, Desactivar
Memoria última
Puede configurar este reproductor para que recuerde la
última posición de reproducción de un disco (vídeo Blu-
ray o DVD) cuando se pone en modo de espera o se abre
la bandeja portadiscos.
Activar
*
, Desactivar
Algunos discos no son compatibles con esta función.
DivX (R) VOD DRM
Puede mostrar el código de registro del vídeo DivX(R).
Subtítulo DivX®
Puede seleccionar si mostrar un subtítulo para el vídeo
DivX(R).
Activar, Desactivar
*
Seguridad
Cambiar Contraseña
Puede definir la contraseña para cambiar el nivel de
Control Paterno y el Código de país. Consulte “Control
Paterno” (pág. 31) y “Código de país” (pág. 31).
La contraseña predeterminada es 0000.
Si olvida la contraseña, consulte “Resolución de
problemas” (pág. 38) y restaure todos los ajustes
predeterminados de Seguridad.
Control Paterno
En algunos Blu-ray Disc/DVD, existe un nivel de control
para la visualización del disco en función de la edad del
espectador. Puede definir el Control Paterno mostrado en
pantalla en función del contenido del disco.
Es necesario introducir la contraseña (consulte “Cambiar
Contraseña” en pág. 31) antes de ajustar los niveles de
Control Paterno.
Después de ajustar el Control Paterno, si reproduce un
disco con un nivel más alto del nivel de Control Paterno
actual o si desea cambiar el nivel de Control Paterno,
aparecerá un cuadro de diálogo solicitando que introduzca
la contraseña.
Desactivar*, 1–8
Código de país
Puede ajustar el Código de país del estado en el que vive.
Es necesario introducir la contraseña (consulte “Cambiar
Contraseña” en pág. 31) antes de ajustar el Código de país.
Este parámetro puede utilizarse para la calificación de
Control Paterno y reproducción de discos.
Red
Configuración de conexión
Permite seleccionar un método de conexión de red.
Información
Puede mostrar la pantalla de información de red. En esta
pantalla puede ver la información de Interfaz (Ethernet),
Tipo de dirección, Dirección IP, Máscara de subred,
Default Gateway y DNS.
Nota
Notas
Cableado* Se conecta a la red mediante Ethernet.
Inalámbrico Se conecta a la red mediante una conexión LAN
inalámbrica.
Permite seleccionar la configuración para una
conexión LAN inalámbrica. Siga las instrucciones en
pantalla para llevar a cabo la operación.
Buscar Redes
Busca un punto de acceso. Permite conectarse al
punto de acceso encontrado.
Manual
Permite configurar la información manualmente para
un punto de acceso.
Auto
Si su punto de acceso admite la función WPS (Wi-Fi
Protected Setup), puede utilizar el método de
configuración automática para conectar este
reproductor al punto de acceso sin necesidad de
introducir información manualmente. Seleccione
PBC (configuración de botón de comando) o el
método de código PIN.
32 Es
Menú SETUP
Prueba de conexión
Puede realizar una prueba de conexión a Internet. Si la
prueba falla, compruebe la “Configuración IP” (pág. 32) y
vuelva a realizar la prueba.
Configuración IP
Puede configurar los ajustes de red.
Numeric keys
Permiten introducir caracteres.
2/3
Permiten cambiar la opción resaltada.
CLEAR Permite eliminar un carácter.
ENTER Permite guardar los ajustes y salir
del menú.
Configuración Proxy
Puede definir Configuración Proxy. Ajuste la opción en
Desactivar para un uso normal. Seleccione Permitir para
definir la configuración del proxy.
Control de Red
Permite definir el control de los dispositivos conectados a
través de Ethernet entre Activar/Desactivar. Cuando se
selecciona Activo con Filtro, puede especificar las
direcciones MAC de los dispositivos de red que podrán
acceder a este reproductor. Este reproductor utiliza
Yamaha Network Control protocol (YNC).
Activar
*
, Activo con Filtro, Desactivar
Cuando Control de Red está activado, el consumo de
energía durante el modo de espera aumenta por la
función de control de red.
Cuando está activado en Activar, se reduce el tiempo
de inicio del sistema.
Standby de red
Puede seleccionar si este reproductor se puede activar
desde otros dispositivos de red como “AV
CONTROLLER” (pág. 22).
Activar, Desactivar
*
Este ajuste solo está disponible si Control de Red
está activado.
Control DMC
Puede seleccionar si permitir que el Controlador
multimedia digital (DMC) compatible con DLNA
(pág. 15) controle este reproductor.
Permitir
*
, Desactivar
Conexión BD-Live
Puede definir la restricción de acceso al contenido de BD-Live.
Configuración de pantalla
Los ajustes predeterminados están marcados con “
*
”.
TV
Salida 3D
Puede seleccionar la salida de vídeo en 3D o 2D desde
este reproductor.
Aunque ajuste “Salida 3D” en “Auto” y reproduzca un
disco Blu-ray 3D, este reproductor selecciona
imágenes en 2D en función del ajuste del televisor, etc.
Pantalla de TV
Puede ajustar la relación de aspecto de la pantalla del
televisor conectado y configurar la salida de vídeo.
Si cambia de televisor (por ejemplo, porque ha adquirido
uno nuevo), y la relación de aspecto de la pantalla del
televisor conectado cambia, también tendrá que cambiar el
ajuste de Pantalla de TV.
Auto* Seleccione este valor para configurar
automáticamente los ajustes de red de este
reproductor con el servidor DHCP.
Manual Seleccione este valor para realizar la configuración
de red (Dirección IP, Máscara de subred, Default
Gateway y DNS) manualmente.
Consejos
Desactivar
*
Desactiva el servidor proxy. Seleccione esta opción
cuando no utilice el servidor proxy.
Permitir Activa los ajustes del host y el puerto proxy.
Host Proxy Define el host proxy.
Puerto proxy Define el puerto proxy.
Notas
Nota
Autorizada
Permite que todos los discos de BD-Live se conecten a la red.
Permitida
Parcialmente
*
Permite utilizar únicamente los discos con certificación
de propietario.
Prohibido
Prohíbe que todos los discos de BD-Live se conecten a la red.
Auto*
Este reproductor selecciona automáticamente vídeos en 3D o 2D.
Desactivar
Este reproductor siempre selecciona vídeos en 2D.
Nota
16:9 Lleno Selecciónelo cuando conecte el reproductor a un
televisor con pantalla 16:9. Cuando se reproduce
vídeo con una relación de aspecto 4:3, el vídeo se
muestra como aparece en la ilustración.
16:9 Normal
*
Selecciónelo cuando conecte el reproductor a un
televisor con pantalla 16:9. Cuando se reproduce
vídeo con una relación de aspecto 4:3, el vídeo se
muestra como aparece en la ilustración.
4:3
Panorámico
Selecciónelo cuando conecte el reproductor a un
televisor con pantalla 4:3. Cuando se reproduce
vídeo con una relación de aspecto 16:9, el vídeo se
muestra como aparece en la ilustración.
4:3 Buzón Selecciónelo cuando conecte el reproductor a un
televisor con pantalla 4:3. Cuando se reproduce
vídeo con una relación de aspecto 16:9, el vídeo se
muestra como aparece en la ilustración.
Tamaño de
imagen original
En un televisor 16:9 (pantalla panorámica)
16:9 Lleno 16:9 Normal
4:3
Tamaño de
imagen original
En un televisor 4:3
4:3 Panorámico 4:3 Buzón
16:9
33 Es
Menú SETUP
Ajustes
4
Español
Resolución HDMI
Puede seleccionar la resolución de salida de vídeo HDMI.
Para obtener más información sobre los formatos de
salida, consulte “Acerca de los formatos de salida de vídeo
HDMI” (pág. 36).
Cuando se define en Auto, la resolución se ajusta a la
resolución máxima según el televisor conectado.
Cuando se define en Disco Original, se utiliza la
resolución y frecuencia de vídeo original grabada en el
Blu-ray Disc o DVD que se reproduce. Puede utilizar la
función de conversión de vídeo de un dispositivo externo.
Si se reproduce un disco que no sea Blu-ray Disc ni DVD,
la resolución y la frecuencia de vídeo funcionarán como
Auto.
Si se reproduce un Blu-ray Disc o DVD cuya resolución y
frecuencia de vídeo no son compatibles con el televisor
conectado, no se verá ninguna imagen. En este caso,
detenga la reproducción y seleccione una opción que no
sea Disco Original.
Auto
*
, Disco Original, 480i/576i, 480p/576p, 720p, 1080i,
1080p
Para emitir audio HD (Dolby TrueHD o DTS-HD
Master Audio) desde un terminal HDMI, configure
Resolución HDMI en Auto o un ajuste superior a
720p.
Sistema de TV
Puede seleccionar el valor de Sistema de TV entre PAL,
NTSC y Multi. Ajuste el mismo valor de Sistema de TV
que su televisor. Para obtener más información sobre los
formatos de salida, consulte “Acerca de los formatos de
salida de vídeo HDMI” (pág. 36).
Color Space
Puede seleccionar la salida Color Space (pág. 41) desde
HDMI. Esta función está disponible cuando el reproductor
se conecta con un cable HDMI.
Esta función solo está disponible en televisores que
admitan dicha función.
HDMI Deep Color
Si su televisor y/o receptor de A/V es compatible con
Deep Color (pág. 41), ajuste esta opción según su televisor
o receptor de A/V. Esta función está disponible cuando el
reproductor se conecta con un cable HDMI.
30 bits, 36 bits, 48 bits, Desactivar
*
HDMI 1080p 24Hz
Permite la salida de vídeo BD codificado con una relación
de cuadro de 24 Hz en HDMI 1080p 24Hz. Con esta
función es posible que disfrute de una reproducción de
vídeo más fluida. Esta función está disponible si su
televisor o receptor de A/V admite dicha función. Para
obtener más información sobre los formatos de salida,
consulte “Acerca de los formatos de salida de vídeo
HDMI” (pág. 36).
Auto
*
, Desactivar
Este parámetro se desactiva cuando la resolución de
salida es diferente de 1080p.
Procesamiento de Video
Reducción de ruido
Puede configurar la Reducción de ruido en un nivel entre
0 y 3. 0 equivale a desactivado y 3 es el nivel máximo.
0, 1, 2
*
, 3
Modo desentrelazado
Puede seleccionar cómo detectar la señal de vídeo. Ajuste
la opción en Auto para un uso normal. Cuando aparece en
la pantalla un ruido de desgarro horizontal, configure esta
opción en Película/Vídeo para eliminar el ruido.
Auto
*
, Película, Vídeo
Subtítulos
Atributo CC
Puede ajustar el aspecto de los subtítulos. Cuando se ha
seleccionado Auto, los subtítulos digitales se mostrarán en
la configuración predeterminada. Cuando se ha
seleccionado Personalizado, puede personalizar el aspecto
de los subtítulos (Color Fuente, Tamaño fuente, etc.)
manualmente.
Auto, Personalizado
Color Fuente, Tamaño fuente, Estilo
fuente,
Opacidad fuente, Borde fuente, Color
borde fuente, Color BG, Opacidad BG,
Color ventana, Opacidad ventana
Personaliza la fuente, el fondo y la ventana utilizados para
los subtítulos cuando Atributo CC se define en
Personalizado.
Nota
NTSC, PAL, Multi
(El ajuste predeterminado varía en función del modelo.)
YCbCr 4:4:4
*
Define Color Space en YCbCr 4:4:4.
YCbCr 4:2:2 Define Color Space en YCbCr 4:2:2.
Full RGB Si ha configurado RGB y el blanco y negro de la
pantalla están demasiado difuminados, seleccione
esta opción. Esta opción se aplica si un componente
conectado admite el intervalo RGB 0–255.
RGB Permite la salida de la señal de vídeo con el rango
normal de señal.
Nota
Nota
34 Es
Menú SETUP
Configuración de audio
Los ajustes predeterminados están marcados con “
*
”.
Salida de audio
Coaxial / Optica
Puede seleccionar el modo de salida de la toma
COAXIAL y del terminal OPTICAL. Para obtener más
información sobre los formatos de salida, consulte
“Acerca de los formatos de salida de audio” (pág. 35).
HDMI
Puede seleccionar el modo de salida del terminal HDMI.
Para obtener información sobre la configuración de las
opciones, consulte “Coaxial / Optica” (pág. 34). Para
obtener más información sobre los formatos de salida,
consulte “Acerca de los formatos de salida de audio”
(pág. 35).
Bitstream
*
, PCM, Recodificar, Desactivar
Para emitir audio HD (Dolby TrueHD o DTS-HD
Master Audio) desde un terminal HDMI, configure
Resolución HDMI en Auto o un ajuste superior a
720p (pág. 33).
Downsampling
Puede seleccionar la frecuencia de submuestreo de la
señal de audio digital. Esta función está activa para la
salida de señal de audio desde la toma COAXIAL/
terminalOPTICAL.
DRC
Puede activar o desactivar el valor de DRC (Compresión
de gama dinámica) (pág. 41) o definirlo en Auto. Al
seleccionar Auto, DRC se activa automáticamente en una
fuente con información de DRC en formato Dolby
TrueHD. DRC hace que los sonidos fuertes como los
sonidos oclusivos se escuchen menos y que las
conversaciones sean más audibles. Resulta útil cuando se
ven películas de noche.
Desactivar, Activar, Auto
*
Salida SACD
Prioridad SACD
Selecciona la prioridad de reproducción de los contenidos
de 2 canales o multicanal, si el disco contiene los dos tipos
de contenidos.
Multi-ch
*
, 2-ch
Capa SACD/CD
Permite seleccionar la capa que se va a reproducir cuando
se reproduce un disco híbrido SA-CD/CD.
SACD
*
, CD
El indicador SA-CD del panel delantero se ilumina
cuando se carga un SA-CD y se selecciona la capa
SA-CD.
Este ajuste solo está disponible si no hay ningún
disco cargado.
No se emiten señales de audio desde la toma
COAXIAL o OPTICAL (pág. 13) si se selecciona la
capa SA-CD.
Ajuste de altavoz
Mezcla descendente 2 Canales
Puede seleccionar 2 canales analógicos como método de
mezcla descendente desde Estéreo o It/Dt.
Post-procesamiento
Mezcla ascendente
Permite convertir la señal de audio de 2 canales en
multicanal. Para realizar esta conversión, seleccione DTS
NEO:6 y, a continuación, seleccione el modo Cine o
Música.
Desactivar
*
, DTS NEO:6
Sistema de Información
Se muestran la versión del software y la dirección MAC
(pág. 42).
Bitstream Permite la salida de la señal digital sin ningún
procesamiento. No se produce la salida del audio
secundario.
PCM Permite la salida de PCM de 2 canales.
Recodificar
*
Permite la salida de Bitstream con audio secundario.
Desactivar Silencia el sonido.
Nota
48K
*
La tasa de muestreo más alta de la salida PCM
digital es 48 kHz.
96K La tasa de muestreo más alta de la salida PCM
digital es 96 kHz.
192K La tasa de muestreo más alta de la salida PCM
digital es 192 kHz.
Consejo
Notas
Estéreo
*
Cambia la salida del canal a estéreo, con lo que
solamente se emite sonido desde los dos altavoces
frontales.
It/Dt Seleccione esta opción si la unidad está conectada a
un descodificador Dolby Pro Logic. El sonido de los
altavoces posteriores se mezcla con el sonido estéreo
de 2 canales.
35 Es
Menú SETUP
Ajustes
4
Español
Acerca de los formatos de salida de audio
*1 “SA” es audio secundario. “BCS” es el sonido de clic del botón, el efecto de sonido de los menús emergentes, etc.
*2 Para USB, DLNA y servicios de red, PCM y la mezcla de 2 canales no están disponibles (silenciados).
*3 Para USB, DLNA y servicios de red, Recodificar no está disponible (el audio de salida tendrá el mismo formato que
bitstream).
Si Coaxial / Optica o HDMI se define en Bitstream, no se emite el audio secundario. (pág. 34)
Para emitir audio HD (Dolby TrueHD o DTS-HD Master Audio) desde un terminal HDMI, configure Resolución
HDMI en Auto o un ajuste superior a 720p (pág. 33).
Formatos de salida SA-CD
Formato de origen
HDMI COAXIAL / OPTICAL MIXED 2CH
Bitstream PCM Recodificar Bitstream PCM Recodificar
PCM 2
canales
con SA o
BCS
*1
PCM 2 canales Dolby Digital PCM 2 canales Dolby Digital 2 canales
sin SA o
BCS
*1
PCM 2 canales PCM 2 canales 2 canales
PCM 5.1
canales
con SA o
BCS
*1
PCM 5.1 canales Dolby Digital PCM 2 canales Dolby Digital 2 canales
sin SA o
BCS
*1
PCM 5.1 canales PCM 2 canales 2 canales
PCM 7.1
canales
con SA o
BCS
*1
PCM 7.1 canales Dolby Digital PCM 2 canales Dolby Digital 2 canales
sin SA o
BCS
*1
PCM 7.1 canales PCM 2 canales 2 canales
Dolby Digital
con SA o
BCS
*1
Dolby Digital
PCM hasta 5.1
canales
Dolby Digital Dolby Digital
PCM 2
canales
Dolby Digital 2 canales
sin SA
o
BCS
*1
Dolby Digital
Plus
con SA o
BCS
*1
Dolby Digital
Plus
PCM hasta 7.1
canales
Dolby Digital
Dolby Digital
PCM 2
canales
Dolby Digital 2 canales
sin SA
o
BCS
*1
Dolby Digital
Plus
Dolby
TrueHD
con SA o
BCS
*1
Dolby
TrueHD
PCM hasta 7.1
canales
Dolby Digital
Dolby Digital
PCM 2
canales
Dolby Digital 2 canales
sin SA
o
BCS
*1
Dolby
TrueHD
DTS
con SA o
BCS
*1
DTS
PCM hasta 5.1
canales
*2
DTS
*3
DTS
PCM 2
canales
*2
DTS
*3
2 canales
*2
sin SA
o
BCS
*1
DTS HD High
Resolution
con SA o
BCS
*1
DTS-HD High
Resolution
PCM hasta 7.1
canales
*2
DTS
*3
DTS
PCM 2
canales
*2
DTS
*3
2 canales
*2
sin SA
o
BCS
*1
DTS HD High
Resolution
*3
DTS-HD
Master Audio
con SA o
BCS
*1
DTS-HD
Master Audio
PCM hasta 7.1
canales
*2
DTS
*3
DTS
PCM 2
canales
*2
DTS
*3
2 canales
*2
sin SA
o
BCS
*1
DTS-HD
Master
Audio
*3
Notas
Ajuste Prioridad SACD (pág. 34)
HDMI COAXIAL / OPTICAL
MIXED 2CH
Multi-ch PCM hasta 5.1 canales Sin salida 2 canales
2-ch PCM hasta 2 canales Sin salida 2 canales
36 Es
Menú SETUP
Acerca de los formatos de salida de vídeo HDMI
Si Sistema de TV se define en NTSC
Si Sistema de TV se define en PAL
*1 La resolución se ajustará en la resolución máxima admitida por el televisor conectado. Por ejemplo, si la resolución
máxima admitida por el televisor conectado es de 1080p, se ajustará la resolución 1080p.
*2 La resolución y la frecuencia serán las del disco de origen.
*3 Si Auto está ajustado en HDMI 1080p 24Hz y el televisor conectado admite el contenido 1080p 24 Hz, se emitirá
1080p 24 Hz en lugar de 1080p 50/60 Hz.
Si Sistema de TV se define en Multi
Si Sistema de TV está configurado como Multi, la salida de la señal de vídeo tiene la misma frecuencia que la fuente.
Consulte las tablas anteriores para obtener información sobre la configuración de frecuencia del televisor y la resolución
de la señal de vídeo de salida.
El ajuste HDMI 1080p 24Hz se desactiva cuando la resolución de salida es diferente de 1080p.
Cuando Sistema de TV se define en NTSC y la fuente de vídeo no es 60 Hz, la señal de salida de vídeo se
convierte a 60 Hz.
Cuando Sistema de TV se define en PAL y la fuente de vídeo no es 50 Hz, la señal de salida de vídeo se convierte
a 50 Hz.
Índice
Resolución HDMI
Auto Disco Original 1080p 1080i 720p 480p/576p 480i/576i
BD-Video con
contenido 1080p/24 Hz
*
1
1080p 24 Hz
1080p 24 Hz/
60 Hz
*3
1080i 60 Hz 720p 60 Hz 480p 480i
BD-Video sin
contenido 1080p/24 Hz
*
1
*
2
1080p 60 Hz 1080i 60 Hz 720p 60 Hz 480p 480i
DVD-Video
*
1
*
2
1080p 60 Hz 1080i 60 Hz 720p 60 Hz 480p 480i
Otros
*
1
*
1
1080p 60 Hz 1080i 60 Hz 720p 60 Hz 480p 480i
Índice
Resolución HDMI
Auto Disco Original 1080p 1080i 720p 480p/576p 480i/576i
BD-Video con
contenido 1080p/24 Hz
*
1
1080p 24 Hz
1080p 24 Hz/
50 Hz
*3
1080i 50 Hz 720p 50 Hz 576p 576i
BD-Video sin
contenido 1080p/24 Hz
*
1
*
2
1080p 50 Hz 1080i 50 Hz 720p 50 Hz 576p 576i
DVD-Video
*
1
*
2
1080p 50 Hz 1080i 50 Hz 720p 50 Hz 576p 576i
Otros
*
1
*
1
1080p 50 Hz 1080i 50 Hz 720p 50 Hz 576p 576i
Notas
37 Es
Ajustes
4
Español
El nuevo software que proporciona características adicionales o mejoras del producto se comercializará según sea
necesario. Se recomienda actualizar periódicamente el software de este reproductor a la versión más reciente.
Para comprobar la disponibilidad de una actualización de software, visite
http://download.yamaha.com/
No extraiga el dispositivo de memoria USB, no ponga el reproductor en modo de espera ni desenchufe el cable de
alimentación o el cable de red mientras se lleva a cabo la actualización de software.
Actualización del software
1. Prepárese para la actualización de
software.
Si actualiza el software desde Almacenamiento
USB:
1 Guarde el paquete de archivos de actualización en
la carpeta correspondiente del dispositivo de
memoria USB. Para obtener más información,
consulte el documento de procedimientos adjunto
con el paquete de archivos de actualización.
2 Conecte el dispositivo de memoria USB.
Si actualiza el software desde la red:
Compruebe que el reproductor está conectado a la
red.
2. Seleccione el método de
actualización e inicie la
actualización desde el menú
SETUP.
1 Pulse SETUP para mostrar la pantalla del menú
SETUP.
2 Seleccione Configuración General = Sistema =
Actualizar.
3 Seleccione el elemento que contiene el paquete
de archivos de actualización desde
Almacenamiento USB/Red.
El sistema buscará el paquete de archivos de
actualización.
3. Actualice el software siguiendo
las indicaciones de los mensajes
que aparecen en pantalla.
La actualización se ha completado. El sistema se
reiniciará.
Actualización de software
Nota
38 Es
INFORMACIÓN ADICIONAL
Consulte la tabla que aparece a continuación cuando el reproductor no funcione correctamente. Si el problema que tiene
no aparece en la lista siguiente o las instrucciones no le sirven de ayuda, apague este reproductor, desenchufe el cable de
alimentación y póngase en contacto con el centro de servicio o concesionario Yamaha autorizado más cercano.
Alimentación
Funcionamiento básico
Reproducción de disco
Resolución de problemas
Problema Posibles causas y soluciones
No hay alimentación. Conecte correctamente el cable de alimentación de CA.
–Pulse p en el panel delantero para encender la alimentación.
La alimentación del reproductor está
apagada.
Este reproductor se apagará automáticamente después de 20 minutos de inactividad (sin
reproducción) si se ha activado el Standby Automático (pág. 30).
Problema Posibles causas y soluciones
El mando a distancia no funciona. Utilice el mando a distancia dentro de su alcance operativo. (pág. 10)
Cambie las pilas. (pág. 10)
Compruebe la configuración de ID de la unidad principal y el mando a distancia. El ID
del mando a distancia de la unidad principal se puede cambiar después de reiniciar la
unidad principal. En ese caso, compruebe el ID del mando a distancia de la unidad
principal y vuelva a ajustarlo si es necesario. (pág. 10)
Los botones no funcionan.
Mantenga pulsado p en el panel delantero durante más de 5 segundos para reiniciar este
reproductor.
Para reiniciar completamente el reproductor, desenchufe el cable de alimentación de la
toma de CA durante 30 segundos o más, vuelva a enchufarlo y, a continuación,
encienda el reproductor.
He olvidado la contraseña.
Mantenga pulsado , y en el panel delantero simultáneamente sin ningún
disco insertado y con la reproducción parada para restaurar los valores predeterminados
de todos los ajustes, incluidos los ajustes de Seguridad (pág. 31). Una vez que la
alimentación se desconecte automáticamente, pulse p para volver a activarla.
Problema Posibles causas y soluciones
El reproductor no puede reproducir un
disco.
Extraiga el disco y límpielo. (pág. 5)
Asegúrese de que se ha cargado correctamente el disco (alineado en la bandeja
portadiscos y con la cara de la etiqueta hacia arriba). (pág. 5)
Utilice un disco admitido por el reproductor. (pág. 3)
Extraiga el disco y compruebe si es un disco admitido por el reproductor o no. (pág. 3)
Compruebe el código de región. (pág. 3)
Compruebe si el disco es defectuoso probando con otro disco.
Los discos CD-R/RW, DVD+R/RW/R DL y DVD-R/RW/R DL deben estar finalizados.
(pág. 3)
El vídeo se para. El reproductor se parará si detecta golpes o vibraciones.
El reproductor hace un sonido de
chasquido cuando comienza la
reproducción o al cargar un disco.
Estos sonidos no son síntoma de avería sino parte del funcionamiento normal del
reproductor.
La reproducción del Blu-ray Disc tarda
en iniciarse.
Este reproductor busca un dispositivo de memoria USB utilizado como
Almacenamiento Local para la función BD-Live (pág. 26) cuando se carga un Blu-ray
Disc. Para reducir el tiempo de espera, mantenga un dispositivo de memoria USB
conectado a uno de los conectores USB (delantero/trasero) de este reproductor
(pág. 16).
39 Es
Resolución de problemas
Información adicional
5
Español
Imagen
Sonido
Red
Problema Posibles causas y soluciones
No hay imagen. Asegúrese de que los cables están correctamente conectados. (pág. 11)
Asegúrese de que el televisor o receptor de A/V conectado está ajustado a la entrada
correcta.
Sin ningún disco cargado o con la reproducción parada, mantenga pulsados los botones
y del panel delantero simultáneamente para restaurar el valor predeterminado
de la resolución del vídeo.
Si sigue sin aparecer la imagen, mantenga pulsado el botón del panel delantero
durante unos 5 segundos para activar NTSC/PAL.
Si está ajustado en Disco Original, se emite una señal no compatible con el televisor
conectado. Cambie el ajuste para emitir una señal compatible con el televisor
conectado. (pág. 33)
Asegúrese de que el disco o archivo que está intentando reproducir es compatible con
este reproductor (pág. 3).
La pantalla se congela y los botones de
control no funcionan.
Pulse y, después, reinicie la reproducción.
Desconecte la alimentación y conéctela de nuevo.
Mantenga pulsado p en el panel delantero durante más de 5 segundos para reiniciar este
reproductor.
La salida de vídeo no tiene la resolución
deseada.
Ajuste la resolución deseada. (pág. 33)
El vídeo de pantalla ancha aparece
estirado verticalmente o aparecen
bandas negras en las partes superior e
inferior de la pantalla. O el vídeo 4:3
aparece estirado horizontalmente.
Cambie la relación de aspecto del televisor. (pág. 32)
Aparece ruido cuadrado (mosaicos) en
la pantalla.
Es posible que aparezcan bloques en las imágenes en escenas con movimientos rápidos
debido a las características de la tecnología de compresión de imagen digital.
Problema Posibles causas y soluciones
No se escucha el sonido o está
distorsionado.
Compruebe que el cable de audio está correctamente conectado. (pág. 11)
Suba el volumen del televisor o del receptor de A/V.
No se escucha sonido durante el modo de reproducción fija, avance rápido y retroceso
rápido. (pág. 9)
Es posible que el audio no se escuche dependiendo del estado de grabación del audio,
por ejemplo, si el contenido de audio grabado no es de señal de audio o es audio no
estándar. (pág. 3)
Asegúrese de que el disco o archivo que está intentando reproducir es compatible con
este reproductor (pág. 3).
Los canales de audio izquierdo y
derecho están invertidos o el sonido
solo sale por uno de ellos.
Compruebe la conexión de audio. (pág. 13)
No se puede escuchar el tipo de audio
que se desea y/o el número de canales.
Consulte el ajuste Salida de audio y “Acerca de los formatos de salida de audio”.
(pág. 34, pág. 35)
No se escucha el sonido de PIP (audio
secundario).
Defina Coaxial / Optica o HDMI en PCM/Recodificar. (pág. 34)
Para escuchar el audio secundario, pulse 2ND AUDIO. (pág. 8)
Dependiendo del disco, es posible que tenga que activar el audio secundario en el me
principal del disco (pág. 9).
Problema Posibles causas y soluciones
No se puede conectar a Internet. Cuando se conecte a Internet seleccionando Cableado en Configuración de conexión,
conecte el cable de red correctamente. (pág. 31)
Encienda el equipo conectado como, por ejemplo, un módem o router de banda ancha.
Conecte correctamente el módem y/o el enrutador de banda ancha.
Si Inalámbrico está seleccionado en Configuración de conexión y se conecta a Internet
mediante Ethernet, seleccione Cableado correctamente. (pág. 31)
Seleccione correctamente Inalámbrico en Configuración de conexión si quiere
conectarse a Internet mediante una LAN inalámbrica. (pág. 31)
40 Es
Resolución de problemas
Mensajes en pantalla
Los mensajes siguientes aparecerán en la pantalla del televisor si el disco que intenta reproducir no es apropiado o
la operación no es correcta.
No se pueden descargar contenidos BD-
Live.
Verifique que este reproductor se puede conectar a Internet normalmente. Consulte
“Prueba de conexión”. (pág. 32)
Conecte el dispositivo de memoria USB correctamente. Compruebe que el dispositivo
de memoria USB está conectado al conector USB del reproductor. (pág. 16)
Compruebe si el Blu-ray Disc admite BD-Live.
Conecte el dispositivo de memoria USB con formato FAT16, FAT32 o NTFS.
Se recomienda conectar el dispositivo de memoria USB con, por lo menos, 2 GB de
espacio libre. Si no hay suficiente espacio libre, formatee el dispositivo de memoria
USB. (pág. 30)
Consulte el manual del usuario suministrado con el disco o póngase en contacto con el
fabricante del disco.
No se puede detectar el servidor DLNA. Verifique que este reproductor se puede conectar a la red normalmente. Consulte
“Prueba de conexión”. (pág. 32)
Encienda el equipo conectado como, por ejemplo un router de banda ancha o el servidor.
Asegúrese de que el reproductor y el servidor están conectados al mismo router (o punto
de acceso).
Dependiendo del servidor DLNA, es posible que sea necesario autorizar al reproductor
desde el servidor.
En función del servidor DLNA, es necesario modificar el ajuste del cortafuego.
No se puede reproducir el archivo del
servidor DLNA.
Asegúrese de que el archivo se puede reproducir. (pág. 3)
Compruebe la configuración del servidor DLNA.
La calidad de funcionamiento y reproducción podría verse afectada por las condiciones
de la red doméstica.
No se puede conectar a Internet a través
de la LAN inalámbrica.
Asegúrese de que el router LAN inalámbrico está encendido.
En función de los elementos circundantes, como el material de las paredes, el estado de
recepción de ondas de radio o los obstáculos entre el reproductor y el router LAN
inalámbrico, es posible que la distancia de comunicación se acorte. Mueva el
reproductor y el router LAN inalámbrico para acercarlos entre sí.
Los dispositivos que funcionan en la banda de frecuencias de 2,4 GHz, como los hornos
microondas, dispositivos Bluetooth o dispositivos digitales inalámbricos, pueden llegar
a interrumpir la comunicación. Aleje el reproductor de estos dispositivos o apáguelos.
Si la conexión a Internet a través de una LAN inalámbrica sigue sin funcionar después
de probar las soluciones anteriores, intente conectarse a través de Ethernet
seleccionando Cableado en Configuración de conexión. (pág. 31)
La red inalámbrica no se encuentra o
está distorsionada.
Asegúrese de que el router LAN inalámbrico está encendido.
Acerque este reproductor al router o cambie la orientación de este reproductor o de la
antena del router LAN inalámbrico.
Si la conexión inalámbrica no se puede configurar con la función WPS, seleccione otra
opción (Buscar Redes o Manual) (pág. 18).
Asegúrese de que la red inalámbrica no se distorsiona por la presencia de hornos
microondas, teléfonos digitales inalámbricos u otros dispositivos Wi-Fi cercanos.
Los hornos microondas, teléfonos digitales inalámbricos u otros dispositivos inalámbricos
cercanos pueden interferir en la red inalámbrica. Apague estos dispositivos.
Asegúrese de que los firewall de la red permiten el acceso de este reproductor a la
conexión inalámbrica.
Si la red inalámbrica no funciona correctamente en su casa, intente realizar una
conexión de red con cable.
Mensaje de error Posibles causas y soluciones
Fichero no compatible El reproductor no admite el archivo. Consulte “Tipos de discos/archivos que pueden
utilizarse con este reproductor” (pág. 3).
¡Código de región erróneo! El disco tiene un código de región incompatible. Consulte “Información sobre la gestión
de la región en los vídeos Blu-ray Disc/DVD” (pág. 3).
La red ha fallado. El reproductor no se puede conectar a la red. Compruebe la conexión (pág. 14) y la
configuración de Red (pág. 31).
Red está bien, proxy ha fallado.
El reproductor no se puede conectar al servidor proxy. Consulte “Configuración Proxy
(pág. 32).
La conexión BD-Live está prohibida en el
menú de SETUP
La conexión BD-Live está prohibida. Consulte “Conexión BD-Live” (pág. 32).
¡La actualización ha fallado por alguna
razón!
La actualización ha fallado. Compruebe si el archivo de actualización está dañado o es
ilegible.
¡ La configuración de IP no es válida !
Por favor modificar..
La configuración IP introducida no es válida. Vuelva a introducir la información
correcta.
Problema Posibles causas y soluciones
41 Es
Información adicional
5
Español
AVCHD
AVCHD es un nuevo formato (estándar) para cámaras
de vídeo de alta definición que se puede utilizar para
grabar y reproducir imágenes de alta resolución HD.
BD-Live™
BD-Live es un estándar de Blu-ray Disc que utiliza una
conexión de red y permite al reproductor conectarse a
Internet para descargar vídeos promocionales y otros
datos.
BDMV
BDMV (película Blu-ray Disc) es uno de los formatos
de aplicación utilizados en BD-ROM, que es una de las
especificaciones de Blu-ray Disc. BDMV es un formato
de grabación equivalente a DVD-Video en la
especificación DVD.
Blu-ray 3D™
Blu-ray 3D le permite ver imágenes 3D de alta
definición completa.
BONUSVIEW™
Los discos compatibles con BONUSVIEW le permiten
disfrutar simultáneamente de subcanal de vídeo para dos
pantallas, subcanal de audio y subtítulos. Aparece una
pequeña pantalla dentro de la pantalla principal durante
la reproducción (Imagen en imagen).
Subtítulos
La audiodescripción es un tipo de subtítulos, la
diferencia entre los subtítulos y la audiodescripción es
que los primeros están diseñados para personas sin
problemas auditivos, mientras que los segundos lo están
para personas que no oyen. Los subtítulos no suelen
mostrar todo el audio.
La audiodescripción muestra efectos de sonido (por
ejemplo, “suena el teléfono” y “ruido de pasos”),
mientras que los subtítulos no lo hacen. Antes de
seleccionar este ajuste, asegúrese de que el disco
contiene información de audiodescripción.
Color Space
Color Space es una gama de colores que se puede
representar. RGB es un espacio de color basado en el
modelo de color RGB (rojo, verde y azul) y se utiliza
normalmente en monitores de PC. YCbCr es un espacio
de color basado en una señal de luminancia (Y) y dos
señales de diferencia de color (Cb y Cr).
Deep Color
Deep Color hace referencia al uso de varias
profundidades de color en pantallas, a partir de
profundidades de 24 bits en versiones anteriores de la
especificación HDMI. Esta profundidad de bits
adicional permite que las pantallas HDTV y otros tipos
de pantallas pasen de millones a miles de millones de
colores y eliminen la aparición de bandas de color en
pantalla para disfrutar de unas transiciones tonales
fluidas y una gradación sutil entre colores. La mayor
relación de contraste permite representar muchos más
tonos de gris entre blanco y negro. Además, Deep Color
aumenta el número de colores disponibles dentro de los
límites definidos por el espacio de color RGB o YCbCr.
DLNA
DLNA (Digital Living Network Alliance) permite
compartir de forma sencilla contenidos digitales a través
de una red doméstica, para que pueda disfrutar de
contenidos digitales almacenados en un PC con el
software del servidor DLNA instalado u otro dispositivo
compatible con DLNA con su televisor a través de este
reproductor. Para conectar este reproductor a sus
servidores DLNA se requieren algunos ajustes del
dispositivo o del servidor DLNA. Para ver más detalles,
consulte el software del servidor DLNA o el dispositivo
DLNA.
DivX®
DivX® es un formato de vídeo digital creado por DivX,
LLC, una división de Rovi Corporation. Este es un
dispositivo DivX Certified® oficial capaz de reproducir
vídeo DivX. Visite divx.com para obtener más
información y herramientas de software para convertir
sus archivos en vídeos DivX.
Dolby Digital
Un sistema de sonido desarrollado por Dolby
Laboratories Inc. que da un ambiente de sala de cine a la
salida de audio cuando el producto está conectado a un
amplificador o procesador Dolby Digital.
Dolby Digital Plus
Un sistema de sonido desarrollado como una extensión
de Dolby Digital. Esta tecnología de codificación de
audio es compatible con sonido envolvente de 7.1
canales.
Dolby TrueHD
Dolby TrueHD es una tecnología de codificación sin
pérdidas que admite hasta 8 canales de sonido
envolvente multicanal para los discos ópticos de la
próxima generación. El sonido reproducido refleja
fielmente, bit a bit, la fuente original.
DRC (Control de gama dinámica)
DRC le permite ajustar la gama entre los sonidos más
alto y más bajo (gama dinámica) para reproducir los
contenidos a un volumen intermedio. Utilícela cuando
sea difícil escuchar los diálogos o durante las horas en
que la reproducción pueda molestar a los vecinos.
DTS
Un sistema de sonido digital desarrollado por DTS, Inc.
para su uso en salas de cine.
DTS-HD High Resolution Audio
DTS-HD High Resolution Audio es una nueva
tecnología desarrollada para el formato de disco óptico
de alta definición de la próxima generación.
DTS-HD Master Audio
DTS-HD Master Audio es una tecnología de
compresión de audio sin pérdidas desarrollada para el
formato de disco óptico de alta definición de la próxima
generación.
Glosario
42 Es
Glosario
FLAC
FLAC (Free Lossless Audio Codec, Códec libre de
comprensión de audio sin pérdida) es un formato de
archivo abierto para la compresión de datos de audio sin
pérdida. Aunque el grado de compresión es inferior al
de otros formatos de audio comprimido con pérdida,
normalmente el audio es de mayor calidad.
HDMI
HDMI (High-Definition Multimedia Interface, Interfaz
Multimedia de Alta Definición) es una interfaz que
admite vídeo y audio en una sola conexión digital. La
conexión HDMI lleva señales de vídeo (estándar y de
alta definición) y señales de audio multicanal a
componentes A/V como, por ejemplo, televisores
equipados con HDMI en forma digital y sin
degradación.
Buzón (LB 4:3)
Un tamaño de pantalla con barras negras en las partes
superior e inferior de la imagen para permitir la
visualización de material en pantalla ancha (16:9) en un
televisor 4:3 conectado.
Sonido PCM lineal
PCM lineal es un formato de grabación de señales
utilizado para CD de audio y en algunos DVD y Blu-ray
Disc. El sonido de los CD de audio se graba a 44,1 kHz
con 16 bits. (El sonido se graba entre 48 kHz con 16 bits
y 96 kHz con 24 bits en discos DVD y entre 48 kHz con
16 bits y 192 kHz con 24 bits en Blu-ray Disc).
Dirección Mac
La dirección Mac es un valor único asignado a un
dispositivo de red para su identificación.
Panorámico (PS 4:3)
Un tamaño de pantalla que recorta los lados de la
imagen para permitir la visualización de material de
pantalla ancha (16:9) en un televisor 4:3 conectado.
Subtítulos
Son las líneas de texto que aparecen en la parte inferior
de la pantalla y que traducen o transcriben el diálogo.
Están grabadas en muchos DVD y Blu-ray Disc.
x.v.Color
x.v.Color reproduce una gama de colores más amplia
que antes, mostrando casi todos los colores que puede
detectar el ojo humano.
43 Es
Información adicional
5
Español
Información general
Alimentación
[Modelo para Reino Unido, Europa, Rusia y Australia]
................................................................................110–240 V CA, 50 Hz
[Modelo para Asia, América Central y del Sur]
...........................................................................110–240 V CA, 50/60 Hz
[Otros modelos]......................................................110–240 V CA, 60 Hz
Consumo............................................................................................... 17 W
Consumo en modo de espera
Control HDMI Desactivar, Standby de red Desactivar....... 0,2 W (típico)
Control HDMI Activar, Standby de red Desactivar............ 0,3 W (típico)
Control HDMI Desactivar, Standby de red Activar............ 5,5 W (típico)
Control HDMI Activar, Standby de red Activar................. 5,5 W (típico)
Dimensiones (An. × Al. × Pr., incluidos salientes) ...... 435 × 86 × 257 mm
Peso .....................................................................................................2,7 kg
Rendimiento de audio
Nivel de salida de audio (1 kHz, 0 dB)
Blu-ray Disc/DVD/CD-DA.........................................................2 ± 0,3 V
Relación señal/ruido
Blu-ray Disc/DVD/CD-DA............................................................ 115 dB
Rango dinámico
Blu-ray Disc/DVD ......................................................................... 105 dB
CD-DA ........................................................................................... 100 dB
Distorsión armónica (1 kHz)
Blu-ray Disc/DVD/CD-DA............................................................0,003%
Respuesta de frecuencia
Blu-ray Disc/DVD ............................ 4 Hz a 22 kHz (muestreo a 48 kHz)
De 4 Hz a 44 kHz (muestreo a 96 kHz)
CD-DA ................................................................................4 Hz a 20 kHz
Entrada/salida
Salida HDMI ................................................................. Conector tipo A × 1
480i/576i/480p/576p/720p/1080i/1080p/1080p@24Hz,
Compatibilidad con Deep Color, x.v. Color
Salida digital............................................................ Óptica × 1, Coaxial × 1
Salida de audio analógica .............................................Mezcla 2 canales × 1
USB ............................................................................... Conector tipo A × 2
LAN inalámbrica............................................. Estándar: IEEE 802.11 b/g/n
Rango de frecuencias: banda de 2,4 GHz
Otros equipos................................................................Remote IN/OUT × 1
Ethernet × 1
Las especificaciones están sujetas a cambio sin previo aviso.
Propiedad intelectual
El material audio-visual puede consistir de productos
con propiedad intelectual que no se deben grabar sin
la autorización del poseedor de dicha propiedad
intelectual. Remítase a las leyes aplicables en su
país.
“Blu-ray Disc™”, “Blu-ray™”, “Blu-ray 3D™”, “BD-
Live™”, “BONUSVIEW™” y los logotipos son marcas
comerciales de Blu-ray Disc Association.
es una marca comercial de DVD Format/Logo
Licensing Corporation.
Fabricado con la licencia de Dolby Laboratories. Dolby y
el símbolo de la doble D son marcas comerciales de Dolby
Laboratories.
Fabricado con licencia en aplicación de las patentes de
EE. UU.: 5,956,674; 5,974,380; 6,226,616; 6,487,535;
7,212,872; 7,333,929; 7,392,195; 7,272,567 y otras
patentes de los EE. UU. e internacionales registradas o
pendientes. DTS-HD, el símbolo y DTS-HD y el símbolo
juntos son marcas comerciales registradas, y DTS-HD
Master Audio es una marca comercial de DTS, Inc.
El producto incluye software. © DTS, Inc. Todos los
derechos reservados.
“HDMI,” el logotipo de “HDMI” y High-Definition
Multimedia Interface son marcas comerciales o marcas
comerciales registradas de HDMI Licensing LLC en los
Estados Unidos y/o otros países.
x.v.Color™
“x.v.Color” y el logotipo de “x.v.Color” son marcas
comerciales de Sony Corporation.
“AVCHD” y el logotipo de “AVCHD” son marcas
comerciales de Panasonic Corporation y Sony
Corporation.
Especificaciones
Nota
Continúa en la página siguiente. \
44 Es
Especificaciones
Java es una marca comercial registrada de Oracle y/o sus
filiales.
DLNA™ y DLNA CERTIFIED™ son marcas
comerciales o marcas comerciales registradas de Digital
Living Network Alliance. Todos los derechos reservados.
Se prohíbe terminantemente el uso no autorizado.
El logotipo Wi-Fi CERTIFIED es una marca de
certificación de Wi-Fi Alliance.
La marca de identificación Wi-Fi Protected Setup es una
marca de Wi-Fi Alliance.
“Wi-Fi”, “Wi-Fi Protected Setup”, “Wi-Fi Direct” y
“Miracast” son marcas o marcas registradas de Wi-Fi Alliance.
Este producto se otorga con licencia en aplicación de la
licencia de cartera de patentes AVC y la licencia de cartera
de patentes VC-1 para su uso personal y no comercial por
parte de un consumidor para (i) codificar vídeo que cumpla
con las normas AVC y VC-1 (“vídeo AVC/VC-1”) y/o (ii)
descodificar vídeo AVC/VC-1 codificado por un
consumidor dedicado a una actividad personal y no
comercial y/o suministrado por un proveedor de vídeo con
licencia para proporcionar vídeo AVC/VC-1. No se otorga
ni se da por supuesta licencia alguna para cualquier otro
uso. Se puede obtener información adicional de MPEG
LA, LLC. Consulte http://www.mpegla.com.
Este producto se otorga con licencia en aplicación de la
licencia de cartera de patentes MVC para su uso personal
de un consumidor u otros usos que no impliquen
remuneración para (i) codificar vídeo que cumpla con la
norma MVC (“vídeo MVC”) y/o (ii) descodificar vídeo
MVC codificado por un consumidor dedicado a una
actividad personal y/o suministrado por un proveedor de
vídeo con licencia para proporcionar vídeo MVC. No se
otorga ni se da por supuesta licencia alguna para cualquier
otro uso. Se puede obtener información adicional de
MPEG LA, LLC. Consulte http://www.mpegla.com
Windows Media Player es una marca comercial o una
marca comercial registrada de Microsoft Corporation en
los Estados Unidos y/o en otros países.
Copyright 2004-2012 Verance Corporation. Cinavia® es una
marca comercial de Verance Corporation. Protegida por la
patente estadounidense 7,369,677 y patentes internacionales
registradas y pendientes de aprobación en virtud de la licencia
de Verance Corporation. Todos los derechos reservados.
DivX®, DivX Certified®, DivX Plus® HD y los
logotipos asociados son marcas comerciales de Rovi
Corporation o sus filiales y se utilizan con licencia.
DivX Certified® para reproducir vídeo DivX® y DivX
Plus® HD (H.264/.MKV) hasta 1080p HD incluido
contenido de calidad.
ACERCA DEL VÍDEO DIVX: DivX® es un formato de
vídeo digital creado por DivX, LLC, una división de Rovi
Corporation. Este es un dispositivo DivX Certified®
oficial que ha superado pruebas rigurosas para verificar
que es capaz de reproducir vídeo DivX. Visite divx.com
para obtener más información y herramientas de software
para convertir sus archivos en vídeos DivX.
ACERCA DIVX VIDEO-ON-DEMAND: este dispositivo
DivX Certified® debe registrarse para reproducir películas
DivX Video-on-Demand (VOD) adquiridas. Para obtener
su código de registro, localice la sección DivX VOD en el
menú de configuración de su dispositivo. Acceda a
vod.divx.com para obtener más información sobre cómo
realizar el registro.
45 Es
Español
Información adicional
5
INFORMACIÓN ADICIONAL
Numerics
2ND AUDIO, mando a distancia ...........8
A
A/B, mando a distancia ..........................9
Actualización de software ....................37
Actualizar, menú SETUP .....................30
Ajuste de altavoz, menú SETUP ..........34
Álbumes Web de Picasa ......................21
Almacenamiento Local,
menú SETUP ...................................30
ANGLE, mando a distancia ...................9
Ángulo, menú en pantalla ....................23
Audio Secundario, menú en pantalla ...23
Audio, formatos de salida ....................35
AUDIO, mando a distancia ....................9
Audio, menú en pantalla ......................23
Audio, menú SETUP ...........................31
AV CONTROLLER ............................22
B
BD-Live ...............................................26
Bitrate, menú en pantalla .....................23
Botones de colores, mando a distancia ...8
Botones de control, mando a distancia ...9
Botones de cursor, mando a distancia ....9
Botones numéricos, mando a distancia
...8
Búsqueda Ins, menú en pantalla ..........23
C
Cambiar Contraseña, menú SETUP .....31
Capítulo, menú en pantalla ..................23
Cargar configuración por defecto,
menú SETUP ...................................30
CLEAR, mando a distancia ...................8
Coaxial / Óptica, menú SETUP ...........34
Code Page, menú en pantalla ...............23
Código de país, menú SETUP .............31
Código PIN (WPS) ..............................31
Color Space, menú SETUP ..................33
Conexión BD-Live, menú SETUP .......32
Configuración de audio,
menú SETUP ...................................34
Configuración de conexión,
menú SETUP ...................................31
Configuración de pantalla,
menú SETUP ...................................32
Configuración General,
menú SETUP ...................................30
Configuración IP, menú SETUP ..........32
Configuración Proxy, menú SETUP ....32
Configuración Sencilla,
menú SETUP ...................................30
Contenido USB, reproducción .............19
Control de Red, menú SETUP .............32
Control HDMI, menú SETUP .............30
Control Paterno, menú SETUP ............31
Controlador multimedia digital
(DMC) .............................................15
D
Disco de datos, reproducción ...............19
DivX (R) VOD DRM,
menú SETUP ...................................31
DLNA ..................................................15
Downsampling, menú SETUP .............34
DRC, menú SETUP .............................34
Dropbox ................................................21
E
ENTER, mando a distancia ....................9
Estilo subtítulos, menú en pantalla .......23
F
Función Control HDMI ........................30
Función de búsqueda ............................25
Función Imagen en Imagen ..................26
Funcionamiento del menú SETUP .......29
H
HDMI 1080p 24Hz, menú SETUP ......33
HDMI Deep Color, menú SETUP .......33
HDMI, menú SETUP ...........................34
HOME, mando a distancia .....................8
Hora, menú en pantalla ........................23
I
Idioma, menú SETUP ..........................30
Información, menú SETUP ..................31
M
Mando a distancia ..................................8
Marca Audio Secundario,
menú SETUP ...................................31
Marca de Angulo, menú SETUP ..........31
Marca PIP, menú SETUP .....................31
Memoria última, menú SETUP ............31
Mensaje Reproducción 3D,
menú SETUP ...................................30
Menú de estado ....................................24
Menú en pantalla ..................................23
Menú, menú SETUP ............................31
Mezcla ascendente, menú SETUP .......34
Mezcla descendente 2 Canales,
menú SETUP ...................................34
Miracast ................................................22
Modo desentrelazado, menú SETUP ...33
Modo/Modo de reproducción,
menú en pantalla ..............................23
N
Notificación de actualización ...............30
O
ON SCREEN, mando a distancia ...........9
OSD, menú SETUP ..............................30
Otras conexiones ..................................17
P
Pantalla de TV, menú SETUP ..............32
Pase de diapositivas,
menú en pantalla ..............................23
PBC
(configuración de botón de comando)
...31
PIP, mando a distancia ...........................8
Pista/Archivo, menú en pantalla ..........23
POP UP/MENU, mando a distancia .......9
Post-procesamiento, menú SETUP ......34
Procesamiento de Video,
menú SETUP ...................................33
PROGRAM, mando a distancia .............8
Programación de la reproducción .........25
Prueba de conexión, menú SETUP ......32
R
Red, menú SETUP ............................... 31
Reducción de ruido, menú SETUP ...... 33
REPEAT, mando a distancia ................. 8
Repetición Ins, menú en pantalla ......... 23
Reproducción Automática Disco,
menú SETUP ................................... 31
Reproducción, menú SETUP ............... 31
RETURN, mando a distancia ................ 9
S
Salida 3D, menú SETUP ..................... 32
Salida de audio, menú SETUP ............ 34
Salida SACD, menú SETUP ............... 34
SEARCH, mando a distancia ................ 9
Seguridad, menú SETUP ..................... 31
SETUP, mando a distancia .................... 9
SETUP, menú ...................................... 27
SHUFFLE, mando a distancia ............... 8
Sistema de Información,
menú SETUP ................................... 34
Sistema de TV, menú SETUP ............. 33
Sistema, menú SETUP ........................ 30
Software, actualización ........................ 37
Standby Automático, menú SETUP .... 30
STATUS, mando a distancia ................. 9
SUBTITLE, mando a distancia ............. 9
Subtítulo, menú en pantalla ................. 23
Subtítulo, menú SETUP ...................... 31
Subtítulos, menú SETUP ..................... 33
T
Título, menú en pantalla ...................... 23
TOP MENU, mando a distancia ............ 9
Transición, menú en pantalla ............... 23
TV, menú SETUP ................................ 32
V
Video secundario, menú en pantalla .... 23
Vídeo, formatos de salida .................... 36
W
WPS (Wi-Fi Protected Setup) ............. 31
Y
YouTube .............................................. 21
Z
ZOOM, mando a distancia .................... 8
Índice
LET OP-i Nl
1 Om er zeker van te kunnen zijn dat u de optimale prestaties
uit uw toestel haalt, dient u deze handleiding zorgvuldig door
te lezen. Bewaar de handleiding op een veilige plek zodat u er
later nog eens iets in kunt opzoeken.
2 Installeer dit toestel op een goed geventileerde, koele, droge
en schone plek — uit de buurt van direct zonlicht,
warmtebronnen, trillingen, stof, vocht, en/of kou. Zorg, ten
behoeve van voldoende ventilatie, minimaal voor de
volgende vrije ruimte.
Boven: 10 cm
Achter: 10 cm
Zijkanten: 10 cm
3 Plaats dit toestel uit de buurt van andere elektrische
apparatuur, motoren of transformatoren om storend gebrom
te voorkomen.
4 Stel dit toestel niet bloot aan plotselinge
temperatuurswisselingen van koud naar warm en plaats het
toestel niet in een omgeving met een hoge vochtigheidsgraad
(bijv. in een ruimte met een luchtbevochtiger) om te
voorkomen dat zich binnenin het toestel condens vormt, wat
zou kunnen leiden tot elektrische schokken, brand, schade
aan dit toestel en/of persoonlijk letsel.
5 Vermijd plekken waar andere voorwerpen op het toestel
kunnen vallen, of waar het toestel blootstaat aan druppelende
of spattende vloeistoffen. Plaats de volgende dingen niet
bovenop dit toestel:
Andere componenten, daar deze schade kunnen
veroorzaken en/of de afwerking van dit toestel kunnen
doen verkleuren.
Brandende voorwerpen (bijv. kaarsen), daar deze
brand, schade aan dit toestel en/of persoonlijk letsel
kunnen veroorzaken.
Voorwerpen met vloeistoffen, daar deze elektrische
schokken voor de gebruiker en/of schade aan dit
toestel kunnen veroorzaken wanneer de vloeistof
daaruit in het toestel terecht komt.
6 Dek het toestel niet af met een krant, tafellaken, gordijn enz.
zodat de koeling niet belemmerd wordt. Als de temperatuur
binnenin het toestel te hoog wordt, kan dit leiden tot brand,
schade aan het toestel en/of persoonlijk letsel.
7 Steek de stekker van dit toestel pas in het stopcontact als alle
aansluitingen gemaakt zijn.
8 Gebruik het toestel niet wanneer het ondersteboven is
geplaatst. Het kan hierdoor oververhit raken, wat kan leiden
tot schade.
9 Gebruik geen overdreven kracht op de schakelaars, knoppen
en/of snoeren.
10 Wanneer u de stekker uit het stopcontact haalt, moet u aan de
stekker zelf trekken, niet aan het snoer.
11 Maak dit toestel niet schoon met chemische oplosmiddelen;
dit kan de afwerking beschadigen. Gebruik alleen een schone,
droge doek.
12 Gebruik alleen het op dit toestel aangegeven voltage. Gebruik
van dit toestel bij een hoger voltage dan aangegeven is
gevaarlijk en kan leiden tot brand, schade aan het toestel en/
of persoonlijk letsel. Yamaha aanvaardt geen
aansprakelijkheid voor enige schade veroorzaakt door
gebruik van dit toestel met een ander voltage dan aangegeven
staat.
13 Om schade door blikseminslag te voorkomen, dient u de
stekker uit het stopcontact te halen wanneer het onweert.
14 Probeer niet zelf wijzigingen in dit toestel aan te brengen of
het te repareren. Neem contact op met erkend Yamaha
servicepersoneel wanneer u vermoedt dat het toestel reparatie
behoeft. Probeer in geen geval de behuizing open te maken.
15 Wanneer u dit toestel voor langere tijd niet zult gebruiken
(bijv. vakantie), dient u de stekker uit het stopcontact te
halen.
16 Lees het hoofdstuk “Problemen oplossen” over veel
voorkomende vergissingen bij de bediening voor u de
conclusie trekt dat het toestel een storing of defect vertoont.
17 Voor u dit toestel verplaatst, dient u op p te drukken om dit
toestel uit (standby) te schakelen en de stekker uit het
stopcontact te halen.
18 Er zal zich condens vormen wanneer de
omgevingstemperatuur plotseling verandert. Haal de stekker
uit het stopcontact en laat het toestel met rust.
19 Wanneer het toestel langere tijd achter elkaar gebruikt wordt,
kan het warm worden. Schakel de stroom uit en laat het
toestel afkoelen.
20 Installeer dit toestel in de buurt van een stopcontact op een
plek waar u de stekker gemakkelijk kunt bereiken.
21 De batterijen mogen niet worden blootgesteld aan hitte, zoals
door direct zonlicht, vuur of iets dergelijks.
VEILIGHEIDSINFORMATIE BETREFFENDE DE
LASER
Dit apparaat is voorzien van een laser. Om oogletsel te
voorkomen, mag u het verwijderen van de afdekking en
het uitvoeren van reparaties aan deze inrichting uitsluitend
door een bevoegde servicemonteur laten uitvoeren.
GEVAAR
Zichtbare laserstraling indien geopend. Voorkom
rechtstreekse blootstelling van de ogen aan de laserstraal.
Als dit toestel is aangesloten op een stopcontact, houdt u
uw ogen niet dicht bij de opening van de disclade en
andere openingen om naar binnen te kijken.
Let op: lees het volgende voor u dit toestel in gebruik neemt.
Gebruik dit apparaat niet op een afstand van minder dan
22 cm van een persoon met een pacemaker of een
defibrillatorimplantaat.
Radiogolven kunnen invloed hebben op
elektromedische apparaten. Gebruik dit toestel niet in de
buurt van medische apparaten of in medische
faciliteiten.
De stroomvoorziening van dit toestel is niet afgesloten
zolang de stekker in het stopcontact zit, ook al is het
toestel zelf uitgeschakeld met p. Dit is de zogenaamde
standby-stand. In deze toestand is het toestel ontworpen
een zeer kleine hoeveelheid stroom te verbruiken.
Het ontkoppelingsapparaat dient actief te blijven
wanneer de stekker of apparaatkoppeling gebruikt wordt
als ontkoppelingsapparaat.
WAARSCHUWING
OM DE RISICO’S VOOR BRAND OF
ELEKTRISCHE SCHOKKEN TE VERMINDEREN,
MAG U DIT TOESTEL IN GEEN GEVAL
BLOOTSTELLEN AAN VOCHT OF REGEN.
1 Nl
1
2
3
4
5
Nederlands
Wat kunt u doen met deze speler ..................... 2
Breed scala aan ondersteunde schijf- en bestandsformaten...... 2
Uitgebreide netwerkfuncties..................................................... 2
Snelinstelling en bediening....................................................... 2
Bijgeleverde onderdelen ................................... 2
Over schijven en bestanden ............................. 3
Schijf-/bestandstypes die u met deze speler kunt gebruiken .... 3
Een schijf laden......................................................................... 4
Voorzorgsmaatregelen voor schijven ....................................... 5
Melding voor het bekijken van 3D-videobeelden..................... 5
Cinavia-technologie.................................................................. 5
Bediening en functies........................................ 6
Voorpaneel................................................................................ 6
Achterpaneel ............................................................................. 7
Afstandsbediening .................................................................... 8
Video-/audioaansluitingen .............................. 11
Verbinding maken met een tv via een AV-ontvanger ............ 12
Rechtstreeks verbinding maken met een tv ............................ 12
Verbinding maken met een tv en audioapparatuur ................. 13
Netwerkaansluiting .......................................... 14
Draadloze verbinding.............................................................. 14
Bekabelde verbinding ............................................................. 14
Instellingen DLNA-server ...................................................... 15
USB-aansluiting ............................................... 16
Overige aansluitingen...................................... 17
Gebruik van de REMOTE CONTROL-aansluitingen............ 17
Aansluiten van het netsnoer.................................................... 17
Initiële instellingen........................................... 18
Instellingen doorvoeren met de Snelinstelling........................ 18
Draadloze verbinding instellen ............................................... 18
HOME-menu...................................................... 19
Foto/muziek/video afspelen.................................................... 19
Netwerkservices gebruiken............................. 21
Over Dropbox™ ..................................................................... 21
Over Picasa™-webalbums...................................................... 21
Over YouTube™ .................................................................... 21
Genieten van smartphoneafbeeldingen en -
video’s op het tv-scherm (Miracast™) ....... 22
Deze speler vanaf andere mobiele apparaten
bedienen (AV CONTROLLER) ..................... 22
Geavanceerd afspelen ..................................... 23
Schermmenu ........................................................................... 23
Statusmenu.............................................................................. 24
Programma afspelen ............................................................... 25
De zoekfunctie gebruiken ...................................................... 25
Genieten van BONUSVIEW™ en BD-Live™ ...................... 25
De beeld-in-beeldfunctie gebruiken
(afspelen van secundaire audio/video)............................... 26
De functie BD-Live™ gebruiken............................................ 26
SETUP-menu .................................................... 27
Voorbeeld van de werking van het SETUP-menu.................. 29
Instellingen Algemeen ............................................................ 30
Display Setting........................................................................ 32
Audio Setting .......................................................................... 34
System Information................................................................. 34
Over de audio-uitgangsformaten ............................................ 35
Over de HDMI-video-uitgangsformaten ................................ 36
Software-upgrade............................................. 37
De software upgraden ............................................................. 37
Problemen oplossen ........................................ 38
Stroom..................................................................................... 38
Basisbediening........................................................................ 38
Afspelen van schijven............................................................. 38
Beeld....................................................................................... 39
Geluid ..................................................................................... 39
Netwerk................................................................................... 39
Meldingen op het scherm........................................................ 40
Woordenlijst...................................................... 41
Specificaties...................................................... 43
Algemeen................................................................................ 43
Audioprestaties ....................................................................... 43
Ingangen/uitgangen................................................................. 43
Auteursrechten........................................................................ 43
Index .................................................................. 45
(aan het einde van deze handleiding)
Over deze handleiding
Deze handleiding beschrijft hoe u de speler met een
afstandsbediening kunt bedienen, tenzij deze niet
beschikbaar is. Sommige handelingen kunnen ook
worden uitgevoerd met de knoppen op het
voorpaneel.
Opmerkingen bevatten belangrijke informatie over
de veiligheids- en bedieningsinstructies. Tips geven
een bedieningstip aan.
Deze handleiding wordt voorafgaand aan de
productie gedrukt. Het ontwerp en de specificaties
zijn onderhevig aan wijzigingen die deels
voortvloeien uit verbeteringen enz. In geval van
verschillen tussen de handleiding en het product
heeft het product prioriteit.
Pictogrammen in deze handleiding
Er worden pictogrammen gebruikt om beschikbare
knoppen/functies voor een bepaalde indeling aan te geven.
Meer informatie over afspeelbare schijven en indelingen
vindt u op pagina pagina 3.
: BD-Video
: DVD-Video, DVD-VR, DVD+VR
: Audio CD, Super Audio CD
: videobestanden
: audiobestanden
: fotobestanden
Inhoudsopgave
1. Inleiding
2. Aansluitingen
3. Afspelen
4. Instellingen
5. Aanvullende informatie
Information about third party software licenses...i
Indien nodig wordt er nieuwe software uitgebracht die
extra functies of productverbeteringen levert. We
raden aan om de software van deze speler regelmatig
te upgraden naar de nieuwste versie. Meer informatie
vindt u bij “Software-upgrade” (p. 37).
BD
DVD
CD
VIDEO
MUSIC
PHOTO
2 Nl
INLEIDING
Breed scala aan ondersteunde schijf- en bestandsformaten
Blu-ray Disc™, DVD’s, SA-CD’s en CD’s (p. 23)
Blu-ray 3D™ (p. 11), BONUSVIEW™ en BD-Live™ (p. 25)
Video-, muziek- en fotobestanden op DVD-R/RW-schijven, CD-R/RW-schijven en USB-geheugenapparaten
(p. 19)
Uitgebreide netwerkfuncties
Geniet van DLNA-serverinhoud (pc of NAS) (p. 19)
Geniet van streaminginhoud via de netwerkservices (p. 21)
Bedien deze speler vanaf andere mobiele apparaten (AV-controller) via een netwerk (p. 22)
Geniet van smartphoneafbeeldingen en -video’s op het tv-scherm (Miracast™) (p. 22)
Snelinstelling en bediening
Snelle en simpele initiële instellingen (p. 18)
Automatische draadloze instellingen met de WPS (Wi-Fi Protected Setup) (p. 18)
Software-upgrade via netwerk of USB (p. 37)
Sequentiële bediening van de tv, AV-ontvanger en deze speler (HDMI Control) (p. 30)
Controleer of de volgende accessoires bij het product geleverd zijn.
Wat kunt u doen met deze speler
Bijgeleverde onderdelen
5#%&
5#%&
USB-inhoud
Draadloos netwerk
(WPS wordt ondersteund)
Diverse schijven
Smartphone-inhoud (Miracast)
Netwerkstreaminginhoud
Pc/NAS-inhoud
(DLNA)
Batterijen (×2)
(AAA, R03, UM-4)
Afstandsbediening Netsnoer
3 Nl
Inleiding
1
Nederlands
Schijf-/bestandstypes die u met
deze speler kunt gebruiken
Schijven van 12 cm en 8 cm kunnen met deze speler
worden afgespeeld. Gebruik geen 8 naar 12 cm-
adapter.
Gebruik schijven waarvan de compatibiliteit
herkenbaar is aan het officiële logo op de schijf. Wij
garanderen niet dat schijven die niet aan deze
normen voldoen door deze speler kunnen worden
afgespeeld. Bovendien kunnen wij voor dergelijke
schijven geen goede beeld- en geluidskwaliteit
garanderen.
* Deze speler is compatibel met USB-geheugenapparaten
die geformatteerd zijn met FAT 16/32 en NTFS.
*1 Bemonsteringsfrequentie tussen 32-48 kHz (stereo) en
bitrate tussen 8-320 kbps
*2 Bemonsteringsfrequentie tussen 32-48 kHz (stereo) en
bitrate tussen 32-192 kbps
*3 Bemonsteringsfrequentie tot 192 kHz/24 bit (LPCM/
stereo)
*4 WMV9 (maximale resolutie: 1.920 x 1.080)
Het afspelen van bestanden die vermeld worden in
de bovenstaande tabel kan niet gegarandeerd
worden. Dit is afhankelijk van de gebruikte
methodes voor het aanmaken van de bestanden of
van de gebruikte codecs.
Het afspelen van alle bestanden op een schijf, USB-
geheugenapparaat en netwerk kan niet gegarandeerd
worden.
Bestanden die beschermd worden door
auteursrechten kunnen niet worden afgespeeld.
Als u DLNA gebruikt, moeten de bestanden voldoen
aan de vereisten van de DLNA -server.
Regiobeheerinformatie voor Blu-ray
Disc-/DVD-video’s
Blu-ray Disc-/DVD-videospelers en schijven hebben
een regiocode die aangeeft in welke regio’s de schijf
kan worden afgespeeld. Controleer de regiocode op
de achterzijde van deze speler.
Een Blu-ray Disc die dezelfde regiocode als de
speler of de regiocode “ABC” draagt, kan afgespeeld
worden op deze speler.
Een DVD-schijf die dezelfde regiocode als de speler
of de regiocode “ALL” draagt, kan afgespeeld
worden op deze speler.
Over schijven en bestanden
Mediatype Opnameformaat
BD-ROM/BD-R/
BD-RE
BD-Video/gegevensbestanden
DVD-ROM DVD-Video
DVD-R/DVD-R
DL/DVD-RW
DVD-Video/DVD-VR/AVCHD/
gegevensbestanden
DVD+R/DVD+R
DL/DVD+RW
DVD-Video/DVD+VR/AVCHD/
gegevensbestanden
CD-ROM CDDA/HDCD
CD-R/CD-RW CDDA/gegevensbestanden
SA-CD SA-CD
USB* Gegevensbestanden
DLNA Gegevensbestanden
Afspeelbare
audiobestands-
formaten
Afspeelbare
videobestands-
formaten
Afspeelbare
fotobestands-
formaten
MP3 (.mp3)
*1
WMA (.wma)
*2
AAC (.aac/.m4a)
WAV (.wav)
*3
FLAC (.flac)
*3
ALAC (.m4a)
*3
DivX (.divx)
MKV met DivX-
indeling (.mkv)
MKV met H.264
(.mkv)
MPEG PS (.mpeg/
.mpg)
MPEG TS (.ts)
MPEG-4 (.mp4)
VOB (.vob)
AVI (.avi)
ASF (.asf)
WMV (.wmv)
*4
JPEG (.jpeg/.jpg)
GIF (.gif)
PNG (.png)
MUSIC
PHOTO
Opmerkingen
Regiobeheerinformatie
Bestemming BD-Video DVD-Video
VS en Canada Regiocode “A” of
“ABC”
Regionummer “1” of
“ALL”
Europa Regiocode “B” of
“ABC”
Regionummer “2” of
“ALL”
Azië, Taiwan en
Korea
Regiocode “A” of
“ABC”
Regionummer “3” of
“ALL”
Centraal- en Zuid-
Amerika
Regiocode “A” of
“ABC”
Regionummer “4” of
“ALL”
1
ALL
2
ALL
3
ALL
4
ALL
4 Nl
Over schijven en bestanden
De bediening en de beschikbare functies van Blu-ray
Disc/DVD-video’s kunnen verschillen van de uitleg
in deze gebruiksaanwijzing en het kan voorkomen
dat bepaalde bedieningshandelingen niet toegestaan
zijn wegens de fabrieksinstellingen van de schijf.
Als er tijdens het afspelen van een schijf een
menuscherm of bedieningsinstructies worden
getoond, dient u de aangegeven bedieningsprocedure
te volgen.
Afhankelijk van de schijf is het mogelijk dat
sommige schijven niet kunnen worden afgespeeld.
Finaliseer alle opnamemedia die met deze speler
worden afgespeeld.
Finaliseren” verwijst naar het proces waarbij een
opgenomen schijf in een recorder wordt bewerkt
zodat de schijf in andere spelers/recorders en ook in
deze speler kan worden afgespeeld. Met deze speler
kunnen alleen gefinaliseerde schijven worden
afgespeeld. (Deze speler kan schijven niet zelf
finaliseren.)
Over Super Audio CD (SA-CD)
Audio-indeling gebaseerd op de huidige CD-
normen, maar die een grotere hoeveelheid informatie
bevat en dus een betere geluidskwaliteit biedt. Er
zijn drie soorten schijven: schijven met één laag,
schijven met twee lagen en hybride schijven. Een
hybride schijf kan afgespeeld worden op bestaande
CD-spelers en op Super Audio CD-spelers aangezien
deze schijf zowel standaardaudio-CD- als Super
Audio CD-informatie bevat.
Dit apparaat toont de tekstgegevens die opgenomen
zijn op een schijf niet in het uitleesvenster op het
voorpaneel.
Een schijf laden
Plaats de schijf met het label naar boven.
Bij schijven die aan beide zijden kunnen worden
afgespeeld, legt u de zijde die u wilt afspelen
omlaag.
Afhankelijk van de schijf en de instellingen van de
speler is het mogelijk dat het afspelen automatisch
begint.
Bij sommige schijven wordt eerst het menu
weergegeven.
De tijd voor het laden van de schijf varieert
afhankelijk van de schijf.
Australië Regiocode “B” of
“ABC”
Regionummer “4” of
“ALL”
Rusland Regiocode “C” of
“ABC”
Regionummer “5” of
“ALL”
Opmerkingen
Regiobeheerinformatie
Bestemming BD-Video DVD-Video
4
ALL
5
ALL
Opmerking
Opmerkingen
1
2
3
Soorten Super Audio CD-schijven
Schijf met één laag
HD-laag
Schijf met twee
lagen
Schijf met een
hybride laag
HD-laag
CD-laag
HD-laag
Hybride Super Audio CD-schijf
CD-laag die kan worden
afgespeeld op alle CD-
spelers
- Kwaliteitsvolle stereo-DSD
- Kwaliteitsvolle meerkanaals-
DSD
Hogedensiteitlaag met:
5 Nl
Over schijven en bestanden
Inleiding
1
Nederlands
Voorzorgsmaatregelen voor
schijven
Vermijd krassen en stof
Blu-ray Disc-, DVD- en CD-schijven zijn gevoelig
voor stof, vingerafdrukken en vooral krassen. Een
schijf met krassen kan onbruikbaar zijn voor afspelen.
Wees voorzichtig met schijven en bewaar ze op een
veilige plaats.
Juiste opslag van schijven
Voorzorgsmaatregelen voor het
hanteren van schijven
Schoonmaken van de pick-uplens
Gebruik nooit in de handel verkrijgbare
reinigingsschijven. Bij gebruik van deze schijven
kan de lens worden beschadigd.
Neem contact op met het dichtstbijzijnde
servicecentrum goedgekeurd door Yamaha om de
lens te laten schoonmaken.
Melding voor het bekijken van 3D-
videobeelden
Sommige mensen ondervinden ongemak (zoals
vermoeide ogen, vermoeidheid of misselijkheid)
terwijl zij 3D-videobeelden bekijken. Wij raden aan
dat alle kijkers tijdens het bekijken van 3D-
videobeelden regelmatig pauzes nemen.
Als u enig ongemak ondervindt, dient u te stoppen met
naar 3D-videobeelden te kijken tot het ongemak verdwijnt.
Raadpleeg een arts als u ernstige ongemakken ondervindt.
Lees aandachtig de gebruikershandleidingen
(Blu-ray Disc en tv) en/of de
waarschuwingsberichten die op de tv verschijnen.
Het zicht van jonge kinderen (vooral die jonger dan
zes jaar zijn) bevindt zich nog steeds in de
ontwikkelingsfase. Raadpleeg uw arts (bijvoorbeeld
een kinderarts of oogarts) voordat u jonge kinderen
naar 3D-videobeelden laat kijken.
Jonge kinderen moeten onder toezicht van
volwassenen zijn om te verzekeren dat zij de
hierboven beschreven aanbevelingen opvolgen.
Cinavia-technologie
De Cinavia-technologie is een onderdeel van het
kopieerbeveiligingssysteem dat ingebouwd is in uw
Blu-ray Disc-speler.
De volgende meldingen kunnen weergegeven
worden en het afspelen wordt mogelijk gestopt of de
audio-uitgangen kunnen tijdelijk gedempt worden
door uw Blu-ray Disc-speler als u een verboden
kopie van inhoud die beschermd is door Cinavia-
technologie probeert af te spelen.
Deze meldingen worden uitsluitend in het Engels weergegeven.
Opmerking over Cinavia
Dit product maakt gebruik van Cinavia-technologie om
het gebruik van verboden kopieën van bepaald
commercieel geproduceerd beeldmateriaal en de
bijbehorende soundtracks te beperken. Wanneer het
gebruik van een verboden kopie wordt geregistreerd,
wordt er een melding weergegeven en wordt het afspelen
of kopiëren onderbroken.
Meer informatie over de Cinavia-technologie vindt u
online in het Klanteninformatiecentrum van Cinavia op
http://www.cinavia.com.. Als u meer informatie over
Cinavia per post wenst te ontvangen, stuurt u een brief met
vermelding van uw postadres naar: Cinavia Consumer
Information Center, P.O. Box 86851, San Diego, CA,
92138, Verenigde Staten.
Plaats de schijf in het midden van het
doosje en berg het doosje en de schijf
verticaal op.
Bewaar schijven niet op plaatsen in direct
zonlicht, vlakbij verwarmingsapparatuur
of in een zeer vochtige omgeving.
Laat schijven niet vallen en stel ze niet aan
sterke trillingen of schokken bloot.
Plaats schijven niet in een omgeving met
veel stof of waar snel schimmelvorming
kan optreden.
Als het oppervlak vuil is geworden, kunt
u dit voorzichtig met een zachte, vochtige
(alleen water) doek afnemen. Veeg
daarmee vanaf het midden naar de rand.
Gebruik geen sprays die bedoeld zijn
voor grammofoonplaten, wasbenzine,
verfverdunner, antistatische vloeistoffen
of andere oplosmiddelen.
Raak het oppervlak niet met uw vingers aan.
Plak geen papier of stickers op de schijf.
Als de afspeelzijde van de schijf vuil of krassen
bevat, kan de speler aannemen dat de schijf niet
geschikt is en de schijflade openen of zal de speler
niet in staat zijn om de schijf op de juiste wijze af te
spelen. Verwijder eventueel vuil met een zachte
doek van de afspeelzijde van de schijf.
Opmerking
Afspelen stopgezet. De inhoud die afgespeeld
wordt, is beschermd door Cinavia® en mag niet
afgespeeld worden op deze apparatuur.
Voor meer informatie, zie http://www.cinavia.com
.
Berichtcode 1.
Audio-uitgangen tijdelijk gedempt. Probeer niet
om het afspeelvolume te regelen. De inhoud die
afgespeeld wordt, is beschermd door Cinavia®
en mag niet afgespeeld worden op deze
apparatuur.
Voor meer informatie, zie http://www.cinavia.com
.
Berichtcode 3.
6 Nl
Voorpaneel
1 p (aan/stand-by)
Hiermee kunt u de speler inschakelen / de
stand-bymodus activeren.
Houd p op het voorpaneel langer dan 5 seconden
ingedrukt om de speler te resetten (systeemherstel).
2 USB-poort (p. 16)
3 SA-CD-aanduiding
Licht op wanneer er een SA-CD geplaatst is en de SA-
CD-laag (p. 4) geselecteerd is.
4 Uitleesvenster op het voorpaneel
Hier wordt informatie betreffende de operationele
status weergegeven.
5 Schijfladeklep
6 (uitwerpen)
Hiermee kunt u de schijflade openen/sluiten.
7 (achterwaarts zoeken/achterwaarts
overslaan)
Druk op deze knop om achterwaarts over te slaan en
houd deze ingedrukt om achterwaarts te zoeken.
8 (voorwaarts zoeken/voorwaarts
overslaan)
Druk op deze knop om voorwaarts over te slaan en
houd deze ingedrukt om voorwaarts te zoeken.
9 (afspelen)
Hiermee kunt u het afspelen starten.
0 (pauzeren)
Hiermee kunt u het afspelen pauzeren.
A (stoppen)
Hiermee kunt u het afspelen stoppen.
Verwijder de beschermende folie van het voorpaneel voor u de speler in gebruik neemt.
Bediening en functies
USB
5#%&
2 5 61 43 7 8 9 0 A
Opmerking
7 Nl
Bediening en functies
Inleiding
1
Nederlands
Achterpaneel
1 AUDIO OUT (L/R) (p. 13)
2 HDMI (p. 11)
3 DIGITAL OUT (COAXIAL/OPTICAL) (p. 13)
4 USB (p. 16)
5 NETWORK (p. 14)
6 REMOTE CONTROL (OUT/IN) (p. 17)
7 AC IN (p. 17)
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT
NETWORK
USB
HDMI
REMOTE CONTROL
OUT IN
AC IN
1 6 72 3 45
8 Nl
Bediening en functies
Afstandsbediening
wordt in de linkerbovenhoek van het scherm
weergegeven als de ingedrukte knop niet
beschikbaar is.
1 Infraroodsignaalzender: verstuurt
infraroodsignalen. Richt dit venster op de
afstandsbedieningssensor (p. 10).
2 p: hiermee kunt u deze speler inschakelen of de stand-
bymodus activeren.
3 : hiermee kunt u de schijflade openen/sluiten.
4 Kleurtoetsen : gebruik deze toetsen in
overeenstemming met de instructies op het scherm.
ZOOM : hiermee kunt u in-
en uitzoomen. Elke keer dat u de toets indrukt,
verandert het formaat van het scherm (inzoomen/
uitzoomen: elk met 3 stappen).
PROGRAM : hiermee kunt u de
afspeelvolgorde instellen (p. 25). U kunt tot 15 sporen
(voor een audioschijf) of titels/hoofdstukken (DVD-
video) instellen.
SHUFFLE :
hiermee kunt u de modus voor willekeurig afspelen
instellen (p. 23).
REPEAT
: hiermee kunt u de herhalingsmodus
wijzigen. Elke keer dat u de toets indrukt, wordt de
herhalingsmodus als volgt gewijzigd.
:
hiermee kunt u de titel die wordt afgespeeld herhalen.
:
hiermee kunt u het hoofdstuk dat wordt afgespeeld herhalen.
:
hiermee kunt u de map die wordt afgespeeld herhalen.
:
hiermee kunt u alle sporen/bestanden op de schijf herhalen.
:
hiermee kunt u het spoor/bestand dat wordt afgespeeld herhalen.
5 Cijfertoetsen: voor het invoeren van cijfers of om
tijdens het afspelen over te schakelen naar het spoor/
hoofdstuk dat overeenstemt met het ingevoerde cijfer.
Afhankelijk van het schijftype en de
afspeelomstandigheden zijn deze knoppen mogelijk
niet beschikbaar.
6 CLEAR: hiermee kunt u het ingevoerde cijfer /
ingestelde item wissen.
7 PIP : hiermee kunt u beeld-in-beeld in-/
uitschakelen (p. 26). PIP Mark ( ) wordt
weergegeven op het scherm wanneer deze functie
beschikbaar is. U kunt dit item ook via het
schermmenu (p. 23) selecteren.
PIP Mark wordt alleen weergegeven wanneer PIP
Mark is ingeschakeld (p. 31).
8 MIRACAST: Hiermee kunt u Miracast starten (p. 22).
9 2ND AUDIO : hiermee kunt u de secundaire
audio van beeld-in-beeld (p. 26) of audiocommentaren
selecteren. Secundaire Audio Mark ( ) wordt
weergegeven op het scherm wanneer deze functie
beschikbaar is (p. 34). U kunt dit item ook via het
schermmenu (p. 23) selecteren.
Secundaire Audio Mark wordt alleen weergegeven
wanneer Secundaire Audio Mark is ingeschakeld (p. 31).
Opmerking
PROGRAM SHUFFLE REPEAT
REPEAT A/B
ZOOM
AUDIO
SUBTITTLE
ANGLE
SEARCH
MIRACAST
CLEAR
PIP
HOME
2ND
AUDIO
ENTER
TOP MENU
RETURN ON SCREEN
POP-UP MENU
SETUP
STATUSSETUP
RED
GREEN BLUE
YELLOW
L
N
J
K
H
E
M
I
0
7
6
5
D
4
3
8
A
9
C
B
E
F
2
1
G
Opmerking
Opmerking
BD
DVD
VIDEO PHOTO
DVD
CD
DVD
CD
VIDEO
PHOTO
BD
DVD
CD
PHOTO
BD
BD
9 Nl
Bediening en functies
Inleiding
1
Nederlands
0 HOME: geeft het HOME-menuscherm weer (p. 19).
A TOP MENU : hiermee kunt u het
hoofdmenuscherm weergeven als de schijf een menu
bevat. Selecteer het gewenste item met 5/a/2/3 en
ENTER.
Afhankelijk van de schijf kunnen specifieke
handelingen verschillend zijn. Volg de instructies op
elk menuscherm.
B Cursortoetsen (5/a/2/3): hiermee kunt u de
markering op het menuscherm verplaatsen.
ENTER: hiermee kunt u het gemarkeerde menu/item
selecteren.
C RETURN: hiermee kunt u terugkeren naar het vorige
menu of scherm enz.
D Bedieningstoetsen
: hiermee kunt u het afspelen stoppen.
: hiermee kunt u het afspelen pauzeren.
: hiermee kunt u inhoud afspelen.
/: hiermee kunt u voorwaarts/achterwaarts
overslaan.
/
:
hiermee kunt u achterwaarts/voorwaarts zoeken. Elke
keer dat u de toets indrukt, verandert de zoeksnelheid
(achterwaarts/voorwaarts zoeken: elk met 5 stappen).
Druk op om het normaal afspelen te hervatten.
: hiermee kunt u de snelheid van een
diavoorstelling wijzigen (langzamer/sneller: 3
stappen).
/
:
druk op deze knop om onmiddellijk te zoeken /
opnieuw af te spelen. Met onmiddellijk zoeken wordt
de inhoud 30 seconden overgeslagen. Met
onmiddellijk herhalen wordt de inhoud van de vorige
10 seconden herhaald.
E SETUP: hiermee kunt u het SETUP-menuscherm
weergeven (p. 27).
F STATUS: hiermee kunt u de afspeelinformatie
weergeven (p. 24).
G REPEAT A/B :
hiermee kunt u een bepaald deel dat u wilt herhalen
opnieuw afspelen.
1 Druk op REPEAT A/B bij de scène waar u het
beginpunt wilt instellen. Op het scherm wordt “A-”
weergegeven.
2 Druk op REPEAT A/B bij
de scène
waar u het
eindpunt wilt instellen. Op het scherm wordt “A-B”
weergegeven. De herhaling start.
3 Druk op REPEAT A/B om het herhaald afspelen te
annuleren. “A-B” verdwijnt en het herhaald
afspelen wordt gestopt.
Afhankelijk van de specificaties van de schijf, kan
deze functie niet worden uitgevoerd.
H SUBTITLE : hiermee kunt u de
taal van de ondertiteling (p. 42) indien beschikbaar
wijzigen. U kunt dit item ook via het schermmenu
(p. 23) selecteren.
I ANGLE : hiermee kunt u de camerahoek
wijzigen als de video vanuit meerdere hoeken is
opgenomen. Angle Mark ( ) wordt op het scherm
weergegeven wanneer deze functie beschikbaar is. U
kunt dit item ook via het schermmenu (p. 23)
selecteren.
Angle Mark wordt alleen weergegeven wanneer
Angle Mark is ingeschakeld (p. 31).
J AUDIO : hiermee kunt u de audiotaal of
de indeling wijzigen. U kunt dit item ook via het
schermmenu (p. 23) selecteren.
K SEARCH :
hiermee kunt u tijdens het afspelen overschakelen naar
een specifiek punt. Raadpleeg voor meer informatie
over deze functie “De zoekfunctie gebruiken” (p. 25).
U kunt dit item ook via het statusmenu (p. 24)
selecteren.
L YouTube: hiermee kunt u YouTube starten (p. 21).
M POP-UP/MENU : hiermee kunt u het
pop-upmenu weergeven. De weergegeven menu-
inhoud verschilt afhankelijk van de schijf. Voor meer
informatie over het bekijken en bedienen van het pop-
upmenu, raadpleegt u de handleiding voor de schijf.
Het hoofdmenuscherm kan worden weergegeven door,
afhankelijk van de DVD, op POP-UP/MENU te
drukken.
N ON SCREEN: hiermee kunt u het schermmenu
weergeven (p. 23).
Opmerking
BD
DVD
BD
DVD
CD
VIDEO MUSIC PHOTO
BD
DVD
CD
VIDEO MUSIC
PHOTO
BD
DVD
CD
VIDEO MUSIC
Opmerking
Opmerking
BD DVD
CD
VIDEO
BD
DVD
VIDEO
BD DVD
BD
DVD
BD
DVD
CD
BD
DVD
10 Nl
Bediening en functies
De batterijen in de afstandsbediening
plaatsen
Vervang beide batterijen als de bedieningsafstand
van de afstandsbediening verkleint.
Gebruik AAA-, R03-, UM-4-batterijen.
Houd bij het plaatsen van de batterijen rekening met
de polariteit. Raadpleeg hiervoor de afbeelding in
het batterijvak.
Verwijder de batterijen als u de afstandsbediening
geruime tijd niet denkt te gebruiken.
Gebruik oude batterijen nooit samen met nieuwe
batterijen.
Combineer geen verschillende types batterijen (bv.
alkalinebatterijen en mangaanbatterijen). Lees de
verpakking zorgvuldig; deze verschillende batterijen
kunnen immers dezelfde vorm en kleur hebben.
Als de batterijen gelekt hebben, dient u deze
onmiddellijk te verwijderen. Raak de gelekte
vloeistof niet aan en zorg ervoor dat deze niet in
contact komt met uw kledij enz. Reinig het
batterijvak grondig voor u nieuwe batterijen plaatst.
Gooi batterijen nooit bij het huishoudelijk afval;
verwijder deze in overeenstemming met de lokale
wetgeving.
Houd batterijen uit de buurt van kinderen. Raadpleeg
meteen een arts als er een batterij per ongeluk wordt
ingeslikt.
Verwijder de batterijen uit de afstandsbediening als
u deze gedurende een lange tijd niet zult gebruiken.
Laad de bijgeleverde batterijen niet op en demonteer
deze niet.
Bedieningsbereik van de
afstandsbediening
ID-functie
Wanneer u meerdere Yamaha-producten gebruikt, kan de
afstandsbediening andere Yamaha-producten bedienen of
een andere afstandsbediening kan deze speler bedienen.
Wijzig in dat geval het ID van de afstandbediening om
ongewenste bediening te voorkomen. Als u het ID van de
afstandsbediening gewijzigd hebt, dient u ervoor te zorgen
dat u hetzelfde ID selecteert voor het hoofdapparaat.
De standaardinstelling is ID1.
1 Instelling afstandsbediening
Om het ID te wijzigen van ID1 naar ID2, houdt u de
rode knop en cijfertoets 2 gedurende 7 seconden
tegelijk ingedrukt. Om het ID te wijzigen van ID2
naar ID1, houdt u de rode knop en cijfertoets 1
gedurende 7 seconden tegelijk ingedrukt.
2 Instelling hoofdapparaat
Houd en op het voorpaneel
gedurende 2 seconden tegelijk ingedrukt om het
huidige ID weer te geven wanneer:
geen schijf in de speler is geplaatst.
de schijflade gesloten is.
het afspelen gestopt is.
“NO DISC” wordt weergegeven op het display
op het voorpaneel.
Houd de knoppen gedurende 2 seconden ingedrukt
om het ID te wijzigen tussen ID1 en ID2.
Als er gedurende een paar minuten geen batterijen of
als er lege batterijen in de afstandsbediening
geplaatst zijn, wordt het ID van de afstandsbediening
automatisch ingesteld op ID1. Als u de
afstandsbediening wilt gebruiken met de instelling
ID2, moet u nieuwe batterijen plaatsen en het ID van
de afstandsbediening opnieuw instellen.
–Als u de speler reset, is het ID van de
afstandsbediening ID1.
Opmerkingen
1
3
22
Opmerkingen
USB
SA-CD
30°30°
Afstandsbedieningssensor
6 m
11 Nl
Aansluitingen
2
Nederlands
AANSLUITINGEN
Sluit afhankelijk van de apparatuur die u wilt gebruiken de corresponderende video-/audiokabels aan.
Raadpleeg pagina 35 voor informatie over audio/video-uitgangsformaten.
Haal de los verkrijgbare kabels die voor de aansluitingen nodig zijn. Het type en aantal kabels dat u nodig heeft ,
verschillen afhankelijk van de apparatuur die aangesloten moet worden.
Genieten van video/audio door een tv en een AV-ontvanger te gebruiken
Raadpleeg “Verbinding maken met een tv via een AV-ontvanger” (p. 12).
Genieten van video/audio door alleen een tv te gebruiken
Raadpleeg “Rechtstreeks verbinding maken met een tv” (p. 12).
Genieten van video/audio door een tv en audioapparatuur te gebruiken
Raadpleeg “Verbinding maken met een tv en audioapparatuur” (p. 13).
Over HDMI
Gebruik los verkrijgbare HIGH SPEED HDMI-kabels met
het HDMI-logo (zoals weergegeven op de achterflap) om
via de HDMI-aansluiting te genieten van video en digitaal
geluid van hoge kwaliteit.
Raadpleeg voor meer informatie over de functie
HDMI Control “HDMI Control” (p. 30).
Configureer “HDMI” (p. 34) in Audio Setting om de
uitvoermodus van de HDMI-aansluiting te wijzigen.
Verbinding voor het afspelen van
Blu-ray 3D-schijven
Uw systeem moet aan de volgende voorwaarden voldoen
om op deze speler te genieten van Blu-ray 3D-schijven.
Uw tv en AV-ontvanger (indien beschikbaar)
moeten de 3D-functie ondersteunen.
3D Uitgang in Display Setting (p. 32) is ingesteld op
“Auto”.
Video-/audioaansluitingen
Tips
USB
5#%&
Deze speler
AV-ontvanger
TV
Video (HDMI)Video/audio
(HDMI)
Luidsprekers
Audio
USB
5#%&
Deze speler
TV
Video/audio
(HDMI)
USB
5#%&
Deze speler
TV
Video (HDMI)
Audio
(coaxiaal, optisch of analoog)
Audioapparatuur
(zoals een soundbar)
Tips
12 Nl
Video-/audioaansluitingen
Verbinding maken met een tv via
een AV-ontvanger
Verbind met HDMI-kabels deze speler met de AV-
ontvanger en de AV-ontvanger met de tv.
Raadpleeg de gebruiksaanwijzing van uw AV-ontvanger
en luidsprekers voor meer informatie over de
luidsprekeraansluitingen.
Opgelet!
Verbind het netsnoer van deze speler pas
als alle aansluitingen gemaakt zijn.
Rechtstreeks verbinding maken
met een tv
Sluit deze speler aan op de tv met een HDMI-kabel.
Opgelet!
Verbind het netsnoer van deze speler pas
als alle aansluitingen gemaakt zijn.
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT
NETWORK
USB
HDMI
HDMI IN
HDMI OUT
HDMI IN
HDMI
Deze speler
AV-ontvanger
TV
HDMI-aansluiting
Luidsprekers
HDMI-kabel
HDMI-ingang
HDMI-kabel
HDMI-uitgang
HDMI-ingang
Luidsprekeraan-
sluitingen
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT
NETWORK
USB
HDMI
HDMI
HDMI IN
Deze speler
TV
HDMI-aansluiting
HDMI-kabel
HDMI-ingang
13 Nl
Video-/audioaansluitingen
Aansluitingen
2
Nederlands
Verbinding maken met een tv en audioapparatuur
Sluit deze speler aan op de tv met een HDMI-kabel en sluit deze speler aan op audioapparatuur met een audiokabel
(digitale optische kabel, digitale coaxiale kabel of stereokabel).
Opgelet!
Verbind het netsnoer van deze speler pas als alle aansluitingen gemaakt zijn.
Configureer “Coaxial / Optical” (p. 34) in Audio Setting om de uitvoermodus van COAXIAL-/OPTICAL-
aansluitingen te wijzigen.
Schakel HDMI in Audio Setting uit om de audio-uitvoer naar de tv uit te schakelen als de afspeelaudio wordt
uitgevoerd via zowel de tv-luidsprekers als de audioapparatuur.
Audiosignalen of SACD’s kunnen niet worden uitgevoerd via de COAXIAL- of OPTICAL-aansluiting (p. 35).
Tips
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT
NETWORK
USB
HDMI
HDMI
HDMI IN
COAXIAL
OPTICAL
AUDIO OUT
COAXIAL OPTICALAUDIO
Deze speler
TV
OPTICAL-, COAXIAL- of
AUDIO OUT L/R-aansluitingen
Audiokabel
(digitale optische kabel, digitale
coaxiale kabel of stereokabel).
Audio-ingang
(digitale optische, digitale
coaxiale of analoge stereo)
Audioapparatuur
(zoals een soundbar)
HDMI-ingang
HDMI-kabel
HDMI-uitgang
14 Nl
Door deze speler op het netwerk (draadloos of bekabeld) aan te sluiten, kunt u de volgende functies gebruiken.
DLNA-serverinhoud (pc of NAS) afspelen (p. 19)
Diverse netwerkserviceinhoud afspelen (p. 21)
Schijven afspelen die compatibel zijn met BD-Live (p. 25)
Deze speler vanaf andere mobiele apparaten bedienen (AV-controller) (p. 22)
Een breedbandinternetverbinding is vereist om de netwerkservices of BD-Live-functie te gebruiken.
Raadpleeg tevens de handleidingen van de aangesloten apparatuur, want de aansluitmethode kan verschillen
afhankelijk van uw netwerkomgeving.
Gebruik een netwerkkabel/router die 10BASE-T/100BASE-TX ondersteunt.
Als u een router gebruikt die DHCP ondersteunt, hoeft u geen netwerkinstellingen voor deze speler te
configureren omdat de netwerkparameters (zoals IP-adres) er automatisch aan worden toegekend. U hoeft alleen
maar de netwerkinstellingen te configureren als uw router DHCP niet ondersteunt of als u de netwerkparameters
handmatig wilt instellen (p. 32).
Draadloze verbinding
U kunt deze speler draadloos op uw netwerk (router)
aansluiten door gebruik te maken van de Wi-Fi-functie
van deze speler. Raadpleeg “Draadloze verbinding
instellen” (p. 18) om deze Wi-Fi-functie te gebruiken en
configureer de instellingen van de draadloze verbinding.
Bekabelde verbinding
Sluit deze speler op uw netwerk (router) aan met een los
verkrijgbare STP-netwerkkabel (Shielded Twisted Pair).
Netwerkaansluiting
Opmerkingen
Tip
USB
5#%&
Deze speler
Internet Modem Router Pc
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT
NETWORK
USB
HDMI
REMOTE
C
OUT
LAN
NETWORK
Deze speler
Internet Modem Router Pc
NETWORK-
uitgang
Netwerkkabel
LAN-uitgang
15 Nl
Netwerkaansluiting
Aansluitingen
2
Nederlands
Instellingen DLNA-server
U kunt door DLNA multimedia-inhoud (zoals video’s, muziek en foto’s) delen die is opgeslagen op uw DLNA-server
(pc of NAS) die verbonden is met uw netwerk en van deze inhoud genieten met deze speler.
Bovendien kunt u uw mobiele apparaat (bijvoorbeeld een smartphone en een tablet) gebruiken als een draadloze
controller om de speler via het netwerk te bedienen.
Configureer nadat u een netwerkverbinding heeft gemaakt de volgende DLNA-serverinstellingen om de DLNA-functies
te gebruiken (p. 14).
Alle apparaten moeten met hetzelfde netwerk verbonden zijn om DLNA-functies te gebruiken.
De NAS moet met DLNA compatibel zijn om een NAS als een DLNA-server te gebruiken.
Media delen-instelling op DLNA-server
Om multimedia-inhoud die is opgeslagen op uw DLNA-
server (pc of NAS) af te spelen, moet u eerst de Media
delen-instelling configureren in de DLNA-serversoftware
die is geïnstalleerd op de DLNA-server.
Raadpleeg de gebruiksaanwijzingen van uw DLNA-
server en zijn software voor meer informatie over de
DLNA-serverinstelling of de door de DLNA-server
ondersteunde bestandsformaten.
1 Zet uw DLNA-server (pc of NAS) en deze speler aan.
2 Controleer of de DLNA-serversoftware (zoals
Windows Media Player 12) op uw pc is geïnstalleerd
als u een pc als DLNA-server gebruikt.
3 Schakel Media delen op uw DLNA-server in om media
met deze speler te kunnen delen.
Nu is de DLNA-serverinstelling voltooid. Selecteer
een DLNA-server en een multimediabestand in het
HOME-menu om op deze speler te genieten van de
DLNA-serverinhoud (p. 19).
Een mobiel apparaat als een
mediacontroller gebruiken
Als u een mobiel apparaat (zoals een smartphone en een
tablet) heeft dat de DMC-functie (Digital Media
Controller) ondersteunt, kunt u deze speler via het netwerk
vanaf uw smartphone of tablet bedienen.
Stel DMC Control (p. 32) in het SETUP-menu in op
In staat stellen (standaard) om met een mobiel
apparaat deze speler te kunnen bedienen.
Raadpleeg de handleiding van uw mobiele apparaat
en zijn software om te kijken of uw mobiele apparaat
de DMC-functie ondersteunt.
Opmerkingen
USB
5#%&
DLNA
Deze speler
DLNA-server
(pc of NAS)
Afstandsbediening Controller
(mobiel apparaat)
Tip
Tips
16 Nl
U kunt op uw USB-geheugenapparaat opgeslagen multimediabestanden afspelen door een USB-geheugenapparaat aan te
sluiten op een USB-poort op het voor- of het achterpaneel van deze speler (p. 19).
Yamaha kan niet garanderen dat de USB-geheugenapparaten van alle merken functioneren op deze speler.
Sluit een USB-geheugenapparaat aan op een van de USB-poorten (voorkant/achterkant) van deze speler als u de
BD-Live-functie gebruikt (p. 26).
USB-aansluiting
Opmerkingen
COAXIAL
OPTICAL
DIGITAL OUT
AUDIO OUT
NETWORK
USB
HDMI
USB
USB
USB
Deze speler
USB-poort (voorkant)
Deze speler
USB-geheugenapparaat
USB-poort (achterkant)
USB-geheugenapparaat
17 Nl
Aansluitingen
2
Nederlands
Gebruik van de REMOTE
CONTROL-aansluitingen
U kunt de afstandsbedieningssignalen doorgeven en
ontvangen door aan te sluiten op de REMOTE
CONTROL (OUT/IN)-aansluitingen.
Sluit monaurale 3,5mm-ministekkerkabels (los
verkrijgbaar) stevig aan op de REMOTE CONTROL
(OUT/IN)-aansluitingen.
Als uw AV-ontvanger een Yamaha-product is en
over de mogelijkheid beschikt om SCENE-
bedieningssignalen te versturen, kunt u de speler
bedienen met de SCENE-functie.
Opgelet!
Verbind het netsnoer van deze speler pas
als alle aansluitingen gemaakt zijn.
Raadpleeg de gebruiksaanwijzing van uw Yamaha-
AV-ontvanger voor meer informatie over de
SCENE-functie.
U kunt een Yamaha-component (zoals een CD-
speler) die de SCENE-functie ondersteunt,
aansluiten op de REMOTE CONTROL (OUT)-
aansluiting van deze speler.
Aansluiten van het netsnoer
Wanneer alle aansluitingen doorgevoerd zijn, sluit u
het bijgeleverde netsnoer aan op de AC IN-ingang
aan de achterkant van de speler. Steek daarna de
stekker in het stopcontact.
Overige aansluitingen
NETWORK
USB
REMOTE CONTROL
OUT IN
REMOTE CONTROL IN
REMOTE CONTROL OUT
Deze speler
Naar REMOTE
CONTROL
(IN)-aansluiting
Monaurale 3,5mm-
ministekkerkabel
Naar de
ingangsaansluiting
voor de
afstandsbediening
Yamaha-component
Naar de
uitgangsaansluiting
voor de
afstandsbediening
Monaurale
3,5mm-
ministekkerkabel
Infraroodontvanger of
Yamaha-component
(zoals een AV-ontvanger)
Naar REMOTE
CONTROL
(OUT)-aansluiting
Tips
AC IN
Naar het AC-stopcontact
18 Nl
AFSPELEN
Instellingen doorvoeren met de
Snelinstelling
Met Snelinstelling kunt u eenvoudig de taal, resolutie en
beeldverhouding instellen. Wanneer u deze speler voor het
eerst gebruikt na de aankoop, wordt het scherm Snelinstelling
weergegeven. U kunt dezelfde instelling uitvoeren via het
menu SETUP
=
Systeem
=
Snelinstelling.
1
Wanneer het scherm Snelinstelling wordt weergegeven,
drukt u op
ENTER
om Snelinstelling te starten.
2 Stel de taal, resolutie en beeldverhouding in door de
instructies op het scherm te volgen.
Wanneer er geen beeld wordt weergegeven nadat
Snelinstelling voltooid is, raadpleegt u “Problemen
oplossen” (p. 39).
Als deze speler wordt ingeschakeld, verschijnt een
waarschuwingsbericht betreffende het afspelen van een
3D-video. Druk op
ENTER
om het bericht te verwijderen
of op
CLEAR
om het uit te schakelen (p. 30).
Draadloze verbinding instellen
Volg de procedure hieronder om de instellingen voor de
draadloze verbinding te configureren om deze speler
draadloos met uw netwerk (router) te verbinden.
Als uw router (toegangspunt) de WPS-functie (Wi-Fi
Protected Setup) ondersteunt, kunt u de automatische
instelmethode gebruiken om deze speler aan te sluiten op
de router zonder de netwerkinformatie (zoals SSID)
handmatig in te voeren.
1
Druk op
SETUP
om het SETUP-menuscherm weer te geven.
2 Selecteer Instellingen Algemeen = Netwerk =
Verbindingsinstelling = Wireless.
3 Druk op 2/3 omJa te selecteren, druk daarna op
ENTER.
4 Druk op 2/3 om een van de volgende instelmethoden
te selecteren, druk daarna op ENTER.
Scannen: selecteer deze optie om te zoeken naar
beschikbare draadloze netwerken. Selecteer wanneer de
netwerklijst wordt weergegeven de SSID om verbinding
te maken en voer het wachtwoord in.
Handm.: selecteer deze optie om de netwerkinformatie
(zoals SSID) handmatig in te voeren.
Auto: selecteer deze optie om de WPS-functie te
gebruiken. Selecteer PBC (Push Button Configuration) of
de PIN-codemethode, volg daarna de instructies op het
scherm.
Raadpleeg de gebruiksaanwijzing van uw router
voor meer informatie over de bediening van uw
router (toegangspunt).
Selecteer “Scannen” of “Handm.” om de instellingen
van de draadloze verbinding te configureren als de
WPS-functie niet werkt.
Apparaten die gebruik maken van een
frequentieband van 2,4 GHz, zoals een magnetron,
Bluetooth-apparaat of een digitaal draadloos
apparaat, kunnen de draadloze communicatie
verstoren. Plaats de speler uit de buurt van dergelijke
apparaten of schakel deze uit.
De snelheid van de verbinding van het draadloze
netwerk hangt af van uw netwerkomgeving (type
router, afstand tussen de router en deze speler,
installatielocatie enz.). Plaats de speler dichter bij de
router of verander de oriëntatie van deze speler of de
antenne van de router als het geluid of de video
tijdens het afspelen wordt onderbroken.
Initiële instellingen
Opmerkingen
Opmerkingen
19 Nl
Afspelen
3
Nederlands
Het HOME-menu stelt u in staat om de volgende basisbedieningen van deze speler uit te voeren.
Het bekijken en afspelen van multimediabestanden op diverse schijven, USB-geheugenapparaten en uw DLNA-
servers (pc of NAS)
Toegang krijgen tot diverse netwerkservices (p. 21)
Het SETUP-menu weergeven (p. 27)
Meer informatie over afspeelbare schijven en indelingen vindt u op pagina 3.
De instelling Media delen (p. 15) op de DLNA-server moet geconfigureerd worden om DLNA-serverinhoud op de
speler af te spelen.
Foto/muziek/video afspelen
Basisbediening
2/3/5/a: hiermee kunt u de markering verplaatsen.
2: terugkeren naar de hoofdmap.
HOME: het HOME-menuscherm openen/sluiten.
ENTER: de map/het bestand bevestigen.
Basishandelingen voor het afspelen
van bestanden in een gekozen map
Voorbeeld: een filmbestand selecteren op een USB-
geheugenapparaat
Stop het afspelen van de video voor u overschakelt
naar het HOME-menuscherm.
1 Druk op HOME om over te schakelen naar het HOME-
menuscherm.
2 Druk op 5/a om het item te selecteren dat het bestand
bevat dat u wilt afspelen en druk vervolgens op
ENTER.
Controleer of de DLNA-server aanstaat en selecteer
DLNA Search om de lijst bij te werken als uw
DLNA-server niet wordt vermeld.
3 Selecteer de Foto-, Muziek-, Video- of AVCHD-map
die u wilt afspelen en druk vervolgens op ENTER.
Druk op RETURN of selecteer om terug te keren
naar de hoofdmap.
HOME-menu
Tips
Opmerking
MIRACAST
PIP
HOME
2ND
AUDIO
ENTER
TOP MENU
RETURN ON SCREEN
POP-UP MENU
SETUP
Opmerking
Vervolg op de volgende pagina. \
20 Nl
HOME-menu
Merk op dat alleen het type bestanden dat u in deze
stap hebt geselecteerd, wordt weergegeven in de
volgende stap. Als u bijvoorbeeld de Foto-map hebt
geselecteerd in deze stap, worden in de volgende
stap alleen fotobestanden weergegeven.
4 Selecteer de map met het bestand dat u wilt afspelen.
5 Selecteer het bestand dat u wilt afspelen en druk
vervolgens op ENTER.
Wanneer er een videobestand geselecteerd is, wordt het
afspelen gestart.
Wanneer er een muziekbestand geselecteerd is, wordt
het statusscherm weergegeven en wordt het afspelen
gestart.
Wanneer er een fotobestand geselecteerd is, wordt er
een diavoorstelling gestart.
Om te genieten van een diavoorstelling met muziek,
drukt u op HOME om terug te keren naar het
HOME-menuscherm terwijl er muziek wordt
afgespeeld en selecteert u een fotobestand.
Het weergegeven bestand wordt mogelijk niet
afgespeeld, afhankelijk van de inhoud.
Handelingen bij het bekijken van
foto’s
Bij het bekijken van foto’s kunt u de knoppen op de
afstandsbediening als volgt gebruiken.
: hiermee kunt u een diavoorstelling stoppen en
terugkeren naar de bestandbrowser.
: hiermee kunt u een diavoorstelling pauzeren.
: hiermee kunt u een diavoorstelling afspelen.
: hiermee kunt u doorgaan naar een volgende foto.
: hiermee kunt u terugkeren naar een vorige foto.
: hiermee kunt u een diavoorstelling versnellen (3
stappen).
: hiermee kunt u een diavoorstelling vertragen (3
stappen).
5: een foto omkeren.
a: een foto spiegelen.
2: een foto linksom draaien.
3: een foto linksom draaien.
ZOOM: inzoomen/uitzoomen op een foto (inzoomen/
uitzoomen: elk 3 stappen).
5/a/2/3: in de zoommodus verschuiven wanneer
een foto groter is dan het scherm.
Opmerking
Tip
Opmerking
21 Nl
Afspelen
3
Nederlands
U kunt genieten van multimedia-inhoud (zoals foto’s en video’s) door gebruik te maken van de volgende netwerkservices.
Dropbox
Picasa-webalbums
YouTube
Toegang tot inhoud van derde partijen vereist een internetverbinding van hoge snelheid en kan ook
accountregistratie en een betaald abonnement vereisen.
Deze inhoudsservices van derde partijen kunnen op elk moment zonder enige mededeling worden gewijzigd, uitgesteld,
onderbroken of uitgeschakeld en Yamaha kan betreffende dergelijke zaken niet aansprakelijk worden gesteld.
Sommige inhoud is mogelijk alleen voor specifieke landen beschikbaar en wordt mogelijk in specifieke talen
gepresenteerd.
Yamaha verklaart of garandeert niet dat inhoudservices gedurende een bepaalde tijdsperiode geleverd of
beschikbaar zijn en op een dergelijke garantie, nadrukkelijk of geïmpliceerd, kan geen aanspraak worden gemaakt.
1 Druk op HOME om over te schakelen naar het HOME-
menuscherm.
Om naar het YouTube-menuscherm terug te keren,
drukt u op YouTube.
2 Druk op 5/a om netwerkservices te selecteren en druk
vervolgens op ENTER.
3 Druk op 2/3/5/a om de gewenste netwerkservice te
selecteren en druk vervolgens op ENTER.
4 Druk op 2/3/5/a om een item te selecteren en druk
vervolgens op ENTER om de selectie te bevestigen (of
af te spelen).
Druk op HOME om iedere netwerkservice af te
sluiten.
De bedieningsprocedures na stap 4 variëren
afhankelijk van de menu-items die door iedere
service geleverd worden.
Over Dropbox™
Dropbox is een netwerkservice waarmee u uw bestanden
in Dropbox kunt zetten en deze kunt bereiken vanaf uw
computers, telefoons of tablets. Voeg automatisch foto’s
toe en laat overal uw video zien.
Meer informatie vindt u op www.dropbox.com
Over Picasa™-webalbums
Picasa-webalbums is een netwerkservice waarmee
gebruikers foto’s kunnen delen met vrienden en familie of
openbare foto’s kunnen bekijken.
Meer informatie vindt u op picasaweb.google.com
Over YouTube™
YouTube is een netwerkservice waarmee gebruikers
zelfgemaakte video’s op het internet kunnen ontdekken,
bekijken en delen.
Meer informatie vindt u op www.youtube.com
Netwerkservices gebruiken
Opmerkingen
Tip
Tip
Opmerking
Dropbox is een handelsmerk van Dropbox Inc.
Picasa en het Picasa-logo zijn handelsmerken van Google.
Inc.
YouTube en het YouTube-logo zijn handelsmerken
van Google. Inc.
22 Nl
Miracast is een oplossing om video’s naadloos tussen twee apparaten weer te kunnen geven, zonder kabels of een
netwerkverbinding via een toegangspunt (Wi-Fi Direct). U kunt bijvoorbeeld afbeeldingen bekijken van een Miracast-
compatibel apparaat (smartphone enz.) op het scherm van de tv die verbonden is met deze speler.
Kijk in de gebruiksaanwijzing van het apparaat om te controleren of uw apparaat Miracast-compatibel is.
Andere netwerkfuncties (zoals DLNA) zijn niet beschikbaar wanneer Miracast is ingeschakeld op de speler.
1 Druk op MIRACAST.
2 Bedien binnen 60 seconden uw smartphone om
Miracast in te schakelen en selecteer deze speler als het
apparaat dat verbonden moet worden.
Raadpleeg de gebruiksaanwijzing van uw smartphone
voor meer informatie over de bediening van uw
smartphone.
3 Druk op MIRACAST om Miracast te sluiten.
U kunt Miracast ook sluiten door op HOME of
RETURN te drukken.
Door de toepassing “AV CONTROLLER” op uw mobiele apparaat te gebruiken, kunt u het mobiele apparaat als een
afstandsbediening gebruiken en vanaf dit apparaat de speler bedienen.
U kunt de basisfuncties van Blu-ray Disc™-spelers van Yahama bedienen zoals Afspelen, Pauze, Overslaan,
Stroom en cursornavigaties.
De toepassing “AV CONTROLLER” is in veel talen beschikbaar.
Ga naar de website van Yamaha voor meer informatie over “AV CONTROLLER”.
Genieten van smartphoneafbeeldingen en -video’s
op het tv-scherm (Miracast™)
Opmerkingen
USB
5#%&
Miracast-compatibel
apparaat
(smartphone enz.)
Deze speler
TV
Tip
Afhankelijk van de omgeving, kan audio/video worden onderbroken of kan ruis op het tv-scherm verschijnen.
Probeer in dat geval de volgende oplossingen uit.
Plaats het Miracast-apparaat dichter bij de speler.
Schakel andere draadloze apparaten uit die niet gebruikt worden.
Verplaats het Miracast-apparaat en de speler uit de buurt van magnetrons, Bluetooth-apparaten of andere
draadloze apparaten.
Deze speler vanaf andere mobiele apparaten bedienen
(AV CONTROLLER)
AV CONTROLLER
23 Nl
Afspelen
3
Nederlands
In dit hoofdstuk vindt u meer informatie over het afspelen
van in de handel verkrijgbare Blu-ray-schijven, DVD’s,
SA-CD’s, CD’s en opgenomen DVD-RW/R-schijven.
Zie pagina 8 voor de basishandelingen voor het
afspelen.
Schermmenu
Om het schermmenu weer te geven, drukt u op ON
SCREEN. Druk daarna op 5/a/2/3 om een item te
selecteren en druk vervolgens op ENTER om de gewenste
functie te bedienen.
Het schermmenu bevat de volgende items.
Titel : hiermee kunt u het nummer
tonen van de titel die wordt afgespeeld. U kunt
overschakelen naar de gewenste titel door deze via dit
item te selecteren.
Hoofdstuk : hiermee kunt u het
nummer tonen van het hoofdstuk dat wordt afgespeeld. U
kunt overschakelen naar het gewenste hoofdstuk door het
hoofdstuk via dit item te selecteren.
Spoor/Bestand :
hiermee kunt u het nummer tonen van het spoor/bestand
dat wordt afgespeeld. U kunt overschakelen naar het
gewenste spoor/bestand door het via dit item te selecteren.
Tijd : hiermee kunt u
de speelduur weergeven. Selecteer het weergavetype uit
de volgende types:
Verstreken speelduur van de titel, het hoofdstuk, de
schijf, het spoor of het bestand
Resterende speelduur van de titel, het hoofdstuk, de
schijf, het spoor of het bestand
Mode/Afspeelmodus
: hiermee kunt u
de huidige afspeelmodus weergeven. U kunt de
afspeelmodus selecteren uit de volgende opties:
Normaal: normaal afspelen.
Shuffle: willekeurig afspelen zonder herhaling.
Random: willekeurig afspelen met herhaling.
–Normaal
Shuffle CH (hoofdstuk)
Shuffle TT (titel)
Shuffle All
Random CH (hoofdstuk)
Random TT (titel)
Random All
–Normaal
Shuffle F (map)
Random F (map)
Audio : hiermee kunt u de
audiotaal/het signaal van de geselecteerde Blu-ray Disc/
DVD weergeven. U kunt het gewenste type audio instellen.
Hoek :
hiermee kunt u het geselecteerde
camerahoeknummer weergeven. Als de scène vanuit meerdere
camerahoeken is opgenomen, kunt u van camerahoek wisselen.
Ondertitel : hiermee kunt u de
geselecteerde ondertitelingstaal weergeven als er
ondertitels beschikbaar zijn.
Ondertitel Style :
hiermee kunt u de geselecteerde
ondertitelingsstijl weergeven. Deze functie is alleen
beschikbaar voor externe ondertiteling voor videobestanden.
U kunt de gewenste tekststijl voor de ondertiteling instellen.
Bitrate : hiermee
kunt u de bitrate van het audio-/videosignaal weergeven.
Tweede Video : hiermee kunt u PIP in-/
uitschakelen (p. 8).
Tweede Audio : hiermee kunt u de secundaire
audio in-/uitschakelen (p. 8).
Ins Zoeken
: hiermee kunt u 30
seconden overslaan.
Ins Spelen
: hiermee kunt u de
inhoud van de voorbije 10 seconden herhalen.
CC Select
: hiermee kunt u de ondertiteling
voor gehoorgestoorden instellen.
Slide Show :
hiermee kunt u de snelheid van de diavoorstelling
weergeven. U kunt Lngz/Midden/Snel selecteren als
snelheid voor de diavoorstelling.
Overgang : hiermee kunt u tonen hoe foto’s
worden weergegeven op het scherm. U kunt het
overgangstype selecteren.
Code Page : hiermee kunt u de tekencode
selecteren voor de ondertiteling die u hebt toegevoegd aan
een DivX-video (p. 41).
Geavanceerd afspelen
Opmerking
BD
DVD
BD
DVD VIDEO
CD
MUSIC
PHOTO
BD
DVD
CD
DVD CD
PHOTO
CD
DVD
VIDEO MUSIC PHOTO
BD DVD
BD
DVD
BD DVD
BD
BD DVD CD VIDEO MUSIC
BD
BD
BD DVD CD VIDEO MUSIC
BD DVD CD VIDEO MUSIC
BD DVD
PHOTO
PHOTO
VIDEO
24 Nl
Geavanceerd afspelen
Statusmenu
Hier worden verschillende instellingen weergegeven,
zoals ondertiteling, camerahoek en het nummer van de
titel/het hoofdstuk/het spoor dat wordt afgespeeld. Om het
statusmenu weer te geven, drukt u op STATUS. Het
statusmenu bevat de volgende menu’s.
Voorbeeld: pictogrammen bij het afspelen van een
Blu-ray Disc
1 (afspeelstatus)
2 (pictogram voor schijftype/videobestand)
3 (nummer van de titel die wordt afgespeeld):
u kunt overschakelen naar een bepaalde titel met de
knop SEARCH (p. 9).
4 (nummer van het hoofdstuk dat wordt
afgespeeld): u kunt overschakelen naar een bepaald
hoofdstuk met de knop SEARCH (p. 9).
5 (verstreken speelduur): u kunt overschakelen
naar een bepaald punt met de knop SEARCH (p. 9).
6
(herhalingsmodus):
hiermee kunt u de huidige
herhalingsmodus weergeven (p. 8).
7 (geselecteerde audio): u kunt de audiotaal of de
indeling wijzigen met de knop AUDIO.
8 (geselecteerde ondertiteling): u kunt de
ondertitelingstaal wijzigen met de knop SUBTITLE.
Voorbeeld: pictogrammen bij het afspelen van een
muziekbestand
1 (afspeelstatus)
2
(herhalingsmodus):
hiermee kunt u de huidige
herhalingsmodus weergeven (p. 8).
3 (pictogram voor schijftype/muziekbestand)
4 (illustratie) : geeft een illustratie weer als het
bestand hiermee is uitgerust.
5 (nummer van het spoor/bestand dat wordt
afgespeeld): u kunt overschakelen naar een bepaald
spoor met de knop SEARCH (p. 9).
6 (informatie) : geeft muziekinformatie weer
als het bestand hierover beschikt.
7 (verstreken speelduur): u kunt overschakelen
naar een bepaald punt met de knop SEARCH (p. 9).
8 (vooruitgangsbalk) : toont de vooruitgang
van het huidige nummer.
1 (afspeelstatus)
2 (pictogram fotobestand)
3 (nummer van het bestand dat wordt
weergegeven)
4
(herhalingsmodus):
hiermee kunt u de huidige
herhalingsmodus weergeven (p. 8).
5 (snelheid diavoorstelling)
BD
DVD
VIDEO
1 2 3 4 5
6 7 8
DVD
CD
MUSIC
MUSIC
MUSIC
PHOTO
1 2 3 4 5
25 Nl
Geavanceerd afspelen
Afspelen
3
Nederlands
Programma afspelen
Hiermee kunt u de afspeelvolgorde van audioschijftracks
of DVD-hoofdstukken programmeren.
Druk op PROGRAM tijdens het afspelen om het venster
PROGRAMMA weer te geven voor het programmeren
van de afspeelvolgorde.
U kunt tot 15 tracks/hoofdstukken programmeren.
Voorbeeld: de afspeelvolgorde van CD-tracks
programmeren
1 Druk op PROGRAM tijdens het afspelen.
2 Druk op ENTER om de afspeelvolgorde te
programmeren.
Druk voor een audioschijf op 5/a om een gewenst
spoor te selecteren en druk vervolgens op ENTER.
Selecteer voor een DVD-videoschijf een gewenste titel
(weergegeven als TT) en een gewenst hoofdstuk
(weergegeven als CH) in plaats van een spoor.
Om een ingesteld spoor te verwijderen, selecteert u het
spoor dat u wilt verwijderen en drukt u vervolgens op
CLEAR.
Druk op RETURN om Programma afspelen te
annuleren.
3 Druk na het programmeren op om de instellingen
door te voeren en het geprogrammeerde afspelen te
starten.
4 Om het geprogrammeerde afspelen te annuleren, stopt
u het afspelen volledig door op te drukken.
De zoekfunctie gebruiken
Hiermee kunt u tijdens het afspelen overschakelen naar
een gespecificeerd punt.
1 Druk op SEARCH tijdens het afspelen. De statusbalk
wordt weergegeven.
2 Druk op 5/a/2/3 om een van de onderstaande items
te selecteren en druk vervolgens op ENTER.
:
Titelnummer (weergegeven als )
Hoofdstuknummer (weergegeven als )
Verstreken tijd titel (weergegeven als )
Verstreken tijd hoofdstuk (weergegeven als )
:
Spoornummer (weergegeven als )
Verstreken tijd spoor (weergegeven als )
Verstreken tijd schijf (weergegeven als )
:
Bestandsnummer (weergegeven als )
Verstreken tijd bestand (weergegeven als )
:
Bestandsnummer (weergegeven als )
3 Druk op 5/a of een cijfertoets om de waarde van het
gemarkeerde item in te stellen / aan te passen en druk
op ENTER om over te schakelen naar het
gespecificeerde punt.
4 Druk op STATUS om de statusbalk te sluiten.
Genieten van BONUSVIEW™ en
BD-Live™
Deze speler ondersteunt afspeelfuncties voor
BONUSVIEW (p. 41) (BD-ROM profiel 1 versie 1.1) en
BD-Live (p. 41) (BD-ROM profiel 2).
De functies en de afspeelmethode variëren
afhankelijk van de schijf. Raadpleeg de richtlijnen
bij de schijf of de bijgeleverde gebruiksaanwijzing.
DVD CD
Opmerking
BD
DVD
CD
MUSIC
PHOTO
BD DVD
CD
VIDEO MUSIC
PHOTO
26 Nl
Geavanceerd afspelen
De beeld-in-beeldfunctie
gebruiken (afspelen van
secundaire audio/video)
Een BD-Video die secundaire audio en video bevat die
compatibel is met beeld-in-beeld, kan gelijktijdig worden
afgespeeld met de secundaire audio en video in een klein
venster in de hoek van het beeldscherm.
Druk op PIP terwijl PIP Mark ( ) of
Secundaire Audio Mark ( ) wordt
weergegeven om de beeld-in-
beeldfunctie in/uit te schakelen.
Om naar de secundaire audio te luisteren, moet
Audio Output (Coaxial / Optical of HDMI) op PCM
of Reencode (p. 34) staan.
Afhankelijk van de schijf moet u om te kunnen
luisteren naar secundaire audio de secundaire audio
inschakelen via het hoofdmenu van de schijf (p. 9).
De secundaire audio en video voor beeld-in-beeld
kan soms automatisch worden afgespeeld of
verdwijnen afhankelijk van de inhoud van de schijf.
Ook is het mogelijk dat er beperkingen zijn voor de
afspeelbare gedeelten.
De functie BD-Live™ gebruiken
1. Voer de netwerkinstellingen door
(p. 31).
2. Sluit het USB-geheugenapparaat
aan op deze speler (p. 16).
BD-Live-gegevens worden op een USB -
geheugenapparaat opgeslagen dat op deze speler is
aangesloten. Om van deze functies te kunnen
genieten, sluit u een USB-geheugenapparaat dat
USB 2.0 High Speed (480 Mbit/s) ondersteunt aan
op een van de USB-poorten (voorkant/achterkant)
van deze speler om het USB-geheugenapparaat als
Externe opslag te gebruiken.
Externe opslag wordt als een hulpgeheugen gebruikt
wanneer er een Blu-ray-schijf wordt afgespeeld.
Gebruik een USB-geheugenapparaat met minimaal 2
GB vrije ruimte.
De map BUDA wordt indien nodig automatisch
aangemaakt op het USB-geheugenapparaat.
Als er onvoldoende geheugenruimte is, zullen de
gegevens niet worden gekopieerd/gedownload. Wis
onnodige gegevens of gebruik een nieuw USB-
geheugenapparaat.
Het kan enige tijd duren voordat de gegevens zijn
geladen (lezen/schrijven).
Yamaha kan niet garanderen dat de USB-
geheugenapparaten van alle merken functioneren op
deze speler.
Gebruik geen USB-verlengkabel bij het aansluiten
van een USB-geheugenapparaat op de USB-poort
van de speler. Bij gebruik van een USB-
verlengkabel is het mogelijk dat de speler niet juist
functioneert.
3. Speel de schijf af.
4. Gebruik BD-Live volgens de
instructies op de schijf.
Tijdens de BD-Live-bediening mag u het USB-
geheugenapparaat niet verwijderen en het netsnoer
niet loskoppelen.
Voor de afspeelmethode van BD-Live-inhoud enz.
wordt u verwezen naar de instructies in de
handleiding van de Blu-ray Disc.
Om te genieten van BD-Live-functies, voert u de
netwerkverbinding (p. 14) en de netwerkinstellingen
(p. 31) door.
Zie “BD-Live-verbinding” (p. 32) voor het
doorvoeren van de instellingen voor het beperken
van toegang tot BD-Live-inhoud.
De tijd die nodig is om de verstrekte programma’s op
het met deze speler verbonden USB -
geheugenapparaat te downloaden naar deze speler,
varieert afhankelijk van de snelheden van de
internetverbinding en het gegevensvolume van de
programma’s.
Het is mogelijk dat via internet verstrekte BD-Live-
programma’s niet in staat zijn de verbinding weer te
geven afhankelijk van de status (upgraden) van de
provider. In dergelijke gevallen haalt u de schijf eruit
en probeert u het nogmaals.
Als het BD-Live-scherm niet even wordt
weergegeven nadat u de BD-Live-functie in het
Blu-ray Disc-menu geselecteerd hebt, is het
mogelijk dat het USB-geheugenapparaat
onvoldoende vrije ruimte heeft. In dergelijke
gevallen laat u de speler de schijf uitwerpen en wist
u de gegevens op het USB-geheugenapparaat door
het “Formaat”-menu in de “Externe opslag” (p. 30)
te gebruiken.
Opmerkingen
Primaire video Secundaire video
Opmerkingen
Opmerkingen
27 Nl
Instellingen
4
Nederlands
INSTELLINGEN
Met het SETUP-menu kunt u met behulp van de afstandsbediening diverse geluids-/beeldinstellingen doorvoeren voor de functies.
SETUP-menu
Menu/Submenu Item Functie Pagina
Instellingen
Algemeen
Systeem
Automatische Satndby
Energiebesparende functie in-/uitschakelen. 30
HDMI Control Stelt deze speler in om het bedieningssignaal van de
afstandsbediening van uw TV/AV-ontvanger te ontvangen.
30
Ladingsfout Voor het terugzetten van alle instellingen op de
standaardinstellingen, behalve de Veiligheid-instelling.
30
Bijwerken Voor het uitvoeren van upgrades voor de speler. 30
Upgrade
aankondiging
Het weergeven van berichten op het beeldscherm in-/uitschakelen
als deze speler nieuwe software via het internet vindt.
30
3D Playback bericht
Als deze speler wordt ingeschakeld, verschijnt een
waarschuwingsbericht betreffende het afspelen van een 3D-video.
30
Externe opslag Toont de beschikbare ruimte op het USB-geheugenapparaat
dat is verbonden met deze speler of formatteert de “BUDA”-
map op het USB-geheugenapparaat.
30
Snelinstelling Voor het instellen van taal, resolutie, beeldverhouding. 30
Taal OSD Voor het selecteren van de taal voor weergave op het scherm. 30
Menu Geeft prioriteit aan de taal van het schijfmenu. 31
Audio Geeft prioriteit aan de taal van de audio. 31
Ondertitel Geeft prioriteit aan de taal van de ondertiteling. 31
Afspelen Schijf Automatisch
afspelen
Instellen dat de speler schijven automatisch begint af te
spelen.
31
Angle Mark Hiermee wordt de weergave van de Angle Mark ingesteld
wanneer er een Blu-ray Disc/DVD wordt afgespeeld met
meerdere camerahoeken.
31
PIP Mark
Hiermee wordt de weergave van de PIP Mark ingesteld wanneer
er een Blu-ray Disc/DVD wordt afgespeeld met beeld-in-beeld.
31
Secundaire Audio
Mark
Hiermee wordt de weergave van de Secundaire Audio Mark
ingesteld wanneer er een Blu-ray Disc/DVD wordt
afgespeeld met secundaire audio.
31
Last Memory Hiermee kunt u instellen dat de speler de laatste
afspeelpositie van een schijf (Blu-ray of DVD-video)
herinnert als de stand-bymodus geactiveerd wordt of als de
schijflade wordt geopend.
31
DivX (R) VOD DRM Geeft de registratiecode weer voor DivX(R)-video. 31
DivX(R)
Ondertiteling
Hiermee wordt ingesteld of een ondertiteling moet worden
weergegeven voor DivX(R)-video.
31
Veiligheid Wachtwoord
wijzigen
Hiermee kunt u het wachtwoord wijzigen voor
Kinderbeveiliging en Landcode.
31
Kinderbeveiliging Hiermee kunt u de Kinderbeveiliging instellen afhankelijk
van de schijfinhoud.
31
Landcode Hiermee kunt u uw Landcode instellen. 31
Netwerk Verbindingsinstelling Hiermee kunt u een netwerkverbindingsmethode instellen. 31
Informatie Hiermee kunt u het netwerkinformatiescherm weergeven. 31
Verbindingstest Hiermee kunt u de netwerkverbindingstest uitvoeren. 32
IP Setting Hiermee kunt u de IP-instelling instellen op Auto/Handm. 32
Proxy instellen Hiermee kunt u de proxy-instellingen doorvoeren. 32
Netwerk
Instellingen
Voor het instellen van de bediening van apparaten die
verbonden zijn via ethernet op Aan/Uit.
32
Netwerk Standby Hiermee kunt u instellen of de speler vanaf andere
netwerkapparaten aangezet kan worden.
32
DMC Control Hiermee kunt u instellen of DLNA-compatibele Digital
Media Controller (DMC) (p. 15) deze speler mag bedienen.
32
BD-Live-verbinding Hiermee kunt u de BD-Live-verbinding instellen op
Toegestaan/Gedeeltelijke Toegestaan/Verboden.
32
28 Nl
SETUP-menu
Display Setting
TV 3D Uitgang Hiermee kunt u 3D- of 2D-video’s selecteren. 32
TV Scherm Hiermee kunt u de beeldverhouding van de aangesloten tv
instellen en de video-uitgang regelen.
32
HDMI Resolutie Hiermee kunt u de uitgevoerde HDMI-videoresolutie
instellen.
33
TV-systeem Hiermee kunt u het tv-systeem instellen op NTSC/PAL/
Multi.
33
Kleurruimte Hiermee kunt u de kleurruimte instellen op YCbCr 4:4:4/
YCbCr 4:2:2/Full RGB/RGB.
33
HDMI Deep Color Hiermee kunt u de HDMI Deep Color instellen op 30 bits/36
bits/48 bits/Uit.
33
HDMI 1080p 24Hz Hiermee kunt u de HDMI 1080p 24Hz instellen op Auto/Uit. 33
Video Process Ruisonderdrukking Hiermee kunt u het niveau van Ruisonderdrukking instellen. 33
De-interlacing
Mode
Hiermee kunt u de manier instellen waarop het videosignaal
gedetecteerd wordt.
33
Closed Caption CC Attribute Hiermee kunt u de weergave van Closed Captions instellen. 33
Font color
Font size
Font style
Font opacity
Font edge
Font edge color
BG color
BG opacity
Window color
Window opacity
Hiermee kunt u het lettertype, de achtergrond en het venster
aanpassen voor Closed Captions als CC Attribute ingesteld
staat op Custom.
33
Audio Setting
Audio Output Coaxial / Optical Hiermee kunt u de uitvoermodus voor de COAXIAL-/
OPTICAL-
aansluiting instellen op Bitstream/PCM/Reencode/Uit.
34
HDMI Hiermee kunt u de uitvoermodus voor de HDMI-aansluiting
instellen op Bitstream/PCM/Reencode/Uit.
34
Downsampling De neerwaartse bemonsteringsfrequentie voor het digitale
audiosignaal selecteren uit 48K/96K/192K.
34
DRC Hiermee kunt u de DRC (Dynamic Range Compression)
instellen.
34
SACD Output SACD Priority Hiermee kunt u de afspeelprioriteit selecteren voor
tweekanaalsinhoud of meerkanaalsinhoud wanneer een schijf
beide types inhoud bevat.
34
SACD/CD Layer Hiermee kunt u de laag instellen die moet worden afgespeeld
als een hybride SA-CD-/CD-schijf wordt afgespeeld.
34
Luidsprekerin-
stellingen
2ch Downmix Stelt de audio-uitvoer van de AUDIO OUT L/R-bus in.
34
Post Process UpMix Zet het 2-kanaalsaudiosignaal om naar meer kanalen. 34
System
Information
Hiermee kunt u de softwareversie en het MAC-adres
weergeven (p. 42).
34
Menu/Submenu Item Functie Pagina
29 Nl
SETUP-menu
Instellingen
4
Nederlands
Voorbeeld van de werking van het
SETUP-menu
U moet het SETUP-menuscherm oproepen om de
instellingen voor deze speler door te voeren. Hieronder
volgt de uitleg voor de basisbediening van het SETUP-
menu.
Voorbeeld: Schijf Automatisch afspelen instellen
Sommige items kunnen niet worden ingesteld tijdens
het afspelen. Druk in dat geval op om het
afspelen volledig te stoppen voor u de instelling
doorvoert.
1. Geef het SETUP-menuscherm
weer.
Druk op SETUP om het SETUP-menuscherm weer
te geven.
Druk op 2/3 om Instellingen Algemeen te
selecteren en druk vervolgens op ENTER of a.
2. Selecteer een submenu.
Druk op 5/a om Afspelen te selecteren en druk
vervolgens op ENTER of 3.
3. Selecteer een menu-item.
Druk op 5/a om Schijf Automatisch afspelen te
selecteren en druk vervolgens op ENTER of 3.
4. Selecteer een gewenste instelling.
Druk op 5/a om Aan of Uit te selecteren en druk
vervolgens op ENTER.
U moet de cijfertoetsen gebruiken om bij sommige
menu-items cijfers in te voeren (bijvoorbeeld een
wachtwoord).
5. Sluit het menuscherm.
Druk op 2 om terug te keren naar het vorige menu.
Opmerking
REPEAT A/B
AUDIO
SUBTITTLE
ANGLE
SEARCH
MIRACAST
CLEAR
PIP
HOME
2ND
AUDIO
ENTER
TOP MENU
RETURN ON SCREEN
POP-UP MENU
SETUP
STATUSSETUP
Tip
30 Nl
SETUP-menu
Instellingen Algemeen
De standaardinstellingen zijn aangegeven met “
*
”.
Systeem
Automatische Satndby
Energiebesparende functie in-/uitschakelen.
Wanneer u deze inschakelt, zal de speler overschakelen
naar de screensaver als er gedurende 5 minuten geen
handelingen worden uitgevoerd. Daarna schakelt de speler
over naar de stand-bymodus als er gedurende 15 minuten
geen handelingen worden uitgevoerd.
Aan
*
, Uit
HDMI Control
U kunt instellen dat de speler een bedieningssignaal
ontvangt van een TV/AV-ontvanger die compatibel is met
de functie HDMI Control via een HDMI-kabel (p. 11).
Aan, Uit
*
Ladingsfout
U kunt alle instellingen van de speler terugzetten op de
standaardinstellingen, behalve de Veiligheid-instelling
(p. 31). Raadpleeg pagina’s 27–34 voor meer informatie
over de standaardinstellingen.
Bijwerken
U kunt de software handmatig bijwerken via USB Storage
of Netwerk. Meer informatie over het bijwerken van
software vindt u bij “Software-upgrade” (p. 37).
Upgrade aankondiging
U kunt de weergave van berichten op het beeldscherm
wanneer deze speler nieuwere software via het internet
vindt, in-/uitschakelen .
Aan
*
, Uit
3D Playback bericht
U kunt een waarschuwingsbericht betreffende het afspelen
van 3D-video’s die op de tv verschijnt als deze speler
wordt ingeschakeld, in- of uitschakelen.
Aan
*
, Uit
Externe opslag
U kunt de beschikbare ruimte controleren op het USB-
geheugenapparaat dat is verbonden met deze speler of de
“BUDA”-map formatteren (leeg) op het USB-
geheugenapparaat dat is verbonden met deze speler door
Formaat te selecteren.
Om van de functie BD-Live (p. 26) te genieten, moet
u een USB-geheugenapparaat (met minimaal 2 GB
vrije ruimte) aansluiten op een van de USB-poorten
(voorkant/achterkant) van deze speler om het USB-
geheugenapparaat als Externe opslag te gebruiken.
Snelinstelling
U kunt Snelinstelling uitvoeren (p. 18).
Taal
OSD
U kunt de schermtaal selecteren die wordt gebruikt voor
de meldingen of menu’s die worden weergegeven op het
scherm, zoals het SETUP-menu.
English, Français, Español, Deutsch, Italiano, Svenska,
Nederlandse, Polski, Pyccкий, 中文
De functie HDMI Control gebruiken
U kunt met de functie HDMI Control deze speler interactief
bedienen via uw tv (die HDMI Control ondersteunt).
Wanneer u deze speler via een HDMI-kabel aansluit op
een tv die compatibel is met de functie HDMI Control en
HDMI Control in het SETUP-menu inschakelt (p. 30),
kunt u de onderstaande functies uitvoeren.
• Automatische ingangsselectiefunctie
Wanneer u het afspelen op deze speler start, wordt de
ingangsschakelaar van de tv (en een AV-ontvanger als
deze speler is aangesloten op de tv via de AV-ontvanger)
automatisch ingesteld op deze speler. De tv wordt daarbij
automatisch ingeschakeld, afhankelijk van de tv.
• Automatische uitschakelfunctie
Wanneer u de tv uitschakelt terwijl deze speler in de stopstand
staat en het SETUP-menuscherm niet wordt weergegeven,
wordt deze speler ook automatisch uitgeschakeld.
Het is mogelijk dat de functie HDMI Control niet
goed werkt, afhankelijk van de tv.
Andere dan de hierboven vermelde functies
kunnen afhankelijk van de tv of AV-ontvanger
geactiveerd zijn.
Om de functie HDMI Control beschikbaar te
maken, activeert u de functie HDMI Control op
ALLE componenten (speler, tv en AV-ontvanger).
Het is mogelijk dat er hierbij bepaalde
handelingen vereist zijn.
Elke functie kan, afhankelijk van de tv,
onafhankelijk ingesteld worden om aan- of
uitgezet te worden.
Zie de bij de tv en/of AV-ontvanger geleverde
gebruikshandleiding voor details met betrekking
tot de instellingen.
Wanneer de functie HDMI Control geactiveerd is,
neemt het stroomverbruik tijdens de stand-
bymodus toe.
Opmerkingen
Tip
31 Nl
SETUP-menu
Instellingen
4
Nederlands
Menu
U kunt prioriteit geven aan de taal van het schijfmenu.
English, Français, 中文 , Español, Deutsch, Italiano,
Nederlandse, Portugees, Deens, Svenska, Fins, Noors,
Polski, Pyccкий, Koreaans, Japans, Meer
Audio
U kunt prioriteit geven aan de audiotaal voor het afspelen
van een Blu-ray Disc/DVD. Zie “Menu” (p. 31) voor meer
informatie over instelitems.
Ondertitel
U kunt prioriteit geven aan de taal voor Ondertitel.
English, Français, 中文 , Español, Deutsch, Italiano,
Nederlandse, Portugees, Deens, Svenska, Fins, Noors,
Polski, Pyccкий, Koreaans, Japans, Meer, Uit
(De standaardinstellingen bij [Taal] verschillen naargelang
het model.)
Afspelen
Schijf Automatisch afspelen
U kunt Schijf Automatisch afspelen in- of uitschakelen.
Wanneer deze functie ingeschakeld is, wordt een schijf na
het laden automatisch afgespeeld.
Aan
*
, Uit
Angle Mark
U kunt instellen dat de Angle Mark ( ) wordt
weergegeven wanneer er een Blu-ray Disc/DVD wordt
afgespeeld met meerdere camerahoeken.
Aan
*
, Uit
PIP Mark
U kunt instellen dat de PIP Mark ( ) wordt
weergegeven wanneer er een Blu-ray Disc wordt
afgespeeld met beeld-in-beeld (p. 26).
Aan
*
, Uit
Secundaire Audio Mark
U kunt instellen dat de Secundaire Audio Mark ( )
wordt weergegeven wanneer er een Blu-ray Disc wordt
afgespeeld met secundaire audio.
Aan
*
, Uit
Last Memory
U kunt instellen dat de speler de laatste afspeelpositie van
een schijf (Blu-ray of DVD-video) herinnert als de stand-
bymodus geactiveerd wordt of als de schijflade wordt
geopend.
Aan
*
, Uit
Sommige schijven zijn niet compatibel met deze
functie.
DivX (R) VOD DRM
U kunt de registratiecode voor DivX(R)-video weergeven.
DivX(R) Ondertiteling
U kunt selecteren of een ondertiteling moet worden
weergegeven voor DivX(R)-video.
Aan, Uit
*
Veiligheid
Wachtwoord wijzigen
U kunt het wachtwoord instellen voor het wijzigen van het
niveau voor Kinderbeveiliging en de Landcode. Raadpleeg
“Kinderbeveiliging” (p. 31) en “Landcode” (p. 31).
Het standaardwachtwoord is 0000.
Als u het wachtwoord vergeten bent, raadpleegt u
“Problemen oplossen” (p. 38) en stelt u alle instellingen
van Veiligheid in op de standaardinstellingen.
Kinderbeveiliging
Bij sommige Blu-ray-schijven/DVD’s is er een
censuurinstelling mogelijk voor weergave van de schijf
afhankelijk van de leeftijd van de kijker. U kunt de
Kinderbeveiliging voor weergave op het scherm instellen,
afhankelijk van de inhoud van de schijf.
Het wachtwoord (zie “Wachtwoord wijzigen” op p. 31) moet
worden ingevoerd vóór het niveau voor Kinderbeveiliging
wordt ingesteld.
Wanneer u na het instellen van de Kinderbeveiliging een schijf
afspeelt met een niveau dat hoger ligt dan het huidige niveau
van de Kinderbeveiliging of wanneer u het niveau van de
Kinderbeveiliging wilt wijzigen, wordt er een dialoogvenster
weergegeven met de vraag uw wachtwoord in te voeren.
Uit*, 1–8
Landcode
U kunt de Landcode instellen van het land waar u woont.
Het wachtwoord (zie "Wachtwoord wijzigen" op p. 31)
moet worden ingevoerd vóór de Landcode wordt ingesteld.
Deze instelling kan worden gebruikt voor het classificeren
van de Kinderbeveiliging en de schijfweergave.
Netwerk
Verbindingsinstelling
Hiermee kunt u een netwerkverbindingsmethode selecteren.
Informatie
U kunt het netwerkinformatiescherm weergeven. Op dit
scherm ziet u informatie over interface (ethernet), Adrestype,
Ipadres, Subnetmasker, Standaardgateway en DNS.
Opmerking
Opmerkingen
Bedraad*
Hiermee maakt u via ethernet verbinding met het netwerk.
Wireless Hiermee maakt u via een draadloos LAN verbinding
met het netwerk.
U kunt de instellingen voor verbinding via een
draadloos LAN configureren. Volg de instructies op
het scherm om verder te gaan.
Scannen
Hiermee kunt u zoeken naar een toegangspunt. U kunt
verbinding maken met een gevonden toegangspunt.
Handm.
U kunt ook handmatig informatie invoeren voor een
toegangspunt.
Auto
Als uw toegangspunt de WPS-functie (Wi-Fi
Protected Setup) ondersteunt, kunt u de automatische
instelmethode gebruiken om deze speler aan te
sluiten op het toegangspunt zonder de informatie
handmatig in te voeren. Selecteer PBC (Push Button
Configuration) of PIN-codemethode.
32 Nl
SETUP-menu
Verbindingstest
U kunt een internetverbindingstest uitvoeren. Als de test
mislukt, controleert u “IP Setting” (p. 32) en voert u de
test opnieuw uit.
IP Setting
U kunt de netwerkinstellingen configureren.
Numeric keys Hiermee kunt u tekens invoeren.
2/3
Hiermee kunt u de markering verplaatsen.
CLEAR
Hiermee kunt u een teken verwijderen.
ENTER Hiermee kunt u de instellingen
opslaan en het menu afsluiten.
Proxy instellen
U kunt Proxy instellen instellen. Kies Uitschakelen voor
normaal gebruik. Stel dit in op In staat stellen om de
proxy-instellingen door te voeren.
Netwerk Instellingen
Hiermee kunt u de bediening van apparaten die verbonden
zijn via ethernet, instellen op Aan/Uit. Wanneer Aan met
filter is geselecteerd, kunt u de MAC-adressen opgeven
van de netwerkapparaten die toestemming hebben om
verbinding te maken met deze speler. Deze speler maakt
gebruik van Yamaha Network Control protocol (YNC).
Aan
*
, Aan met filter, Uit
Wanneer Netwerk Instellingen ingeschakeld is,
neemt het energieverbruik tijdens de stand-bystand
toe.
Wanneer deze functie ingesteld is op Aan, gaat het
opstarten van het systeem sneller.
Netwerk Standby
U kunt instellen of de speler vanaf andere
netwerkapparaten kan worden aangezet zoals “AV
CONTROLLER” (p. 22).
Aan, Uit
*
Deze instelling is alleen beschikbaar wanneer
Netwerk Instellingen is ingeschakeld.
DMC Control
U kunt instellen of DLNA-compatibele Digital Media
Controller (DMC) (p. 15) deze speler mag bedienen.
In staat stellen
*
, Uitschakelen
BD-Live-verbinding
U kunt de toegang tot BD-Live-inhoud beperken.
Display Setting
De standaardinstellingen zijn aangegeven met
*
”.
TV
3D Uitgang
U kunt voor deze speler 3D- of 2D-video-uitvoer selecteren.
Zelfs als u “3D Uitgang” op “Auto” instelt en een
Blu-ray 3D-schijf afspeelt, selecteert deze speler 2D-
beelden afhankelijk van de instelling van de tv enz.
TV Scherm
Hier kunt u de beeldverhouding van de aangesloten tv
instellen en de video-uitgang regelen.
Als u een andere tv hebt (omdat u bijvoorbeeld een
nieuwe hebt gekocht) en de beeldverhouding van de
aangesloten tv niet meer juist is, moet u de instelling voor
het TV Scherm veranderen.
Auto* Selecteer dit om de netwerkinstellingen van deze
speler met de DHCP-server automatisch te
configureren.
Handm. Selecteer dit om de netwerkinstellingen (Ipadres,
Subnetmasker, Standaardgateway en DNS)
handmatig te configureren.
Tips
Uitschakelen
*
Hiermee kunt u de proxyserver uitschakelen.
Selecteer dit item wanneer de proxyserver niet wordt
gebruikt.
In staat
stellen
Hiermee kunt u de instellingen voor proxyhost en
proxypoort inschakelen.
Proxy Host Hiermee kunt u de proxyhost instellen.
Proxypoort Hiermee kunt u de proxypoort instellen.
Opmerkingen
Opmerking
Toegestaan Alle BD-Live-schijven kunnen verbinding maken
met het netwerk.
Gedeeltelijke
Toegestaan
*
Alleen toegang tot schijven met eigenaarcertificatie.
Verboden Geen enkele BD-Live-schijf kan verbinding maken
met het netwerk.
Auto*
Deze speler selecteert automatisch 3D- of 2D-video’s.
Uit Deze speler selecteert altijd 2D-video’s.
Opmerking
16:9 Vol Selecteer deze instelling wanneer de speler
aangesloten is op een tv met een beeldverhouding
van 16:9. Wanneer er een video met een
beeldverhouding van 4:3 wordt afgespeeld, wordt de
video zoals hieronder weergegeven.
16:9 Normaal
*
Selecteer deze instelling wanneer de speler
aangesloten is op een tv met een beeldverhouding
van 16:9. Wanneer er een video met een
beeldverhouding van 4:3 wordt afgespeeld, wordt de
video zoals hieronder weergegeven.
4:3 Pan Scan Selecteer deze instelling wanneer de speler
aangesloten is op een tv met een beeldverhouding
van 4:3. Wanneer er een video met een
beeldverhouding van 16:9 wordt afgespeeld, wordt
de video zoals hieronder weergegeven.
4:3 Letter BoxSelecteer deze instelling wanneer de speler
aangesloten is op een tv met een beeldverhouding
van 4:3. Wanneer er een video met een
beeldverhouding van 16:9 wordt afgespeeld, wordt
de video zoals hieronder weergegeven.
Formaat
oorspronkelijk beeld
Op 16:9-tv (breedbeeld)
16:9 Vol 16:9 Normaal
4:3
Formaat
oorspronkelijk beeld
Op 4:3-tv
4:3 Pan Scan 4:3 Letter Box
16:9
33 Nl
SETUP-menu
Instellingen
4
Nederlands
HDMI Resolutie
U kunt de uitgevoerde HDMI-videoresolutie selecteren.
Raadpleeg voor meer informatie over uitgangsformaten
“Over de HDMI-video-uitgangsformaten” (p. 36).
Wanneer Auto ingesteld is, wordt de resolutie ingesteld op
de maximale resolutie voor de aangesloten tv.
Wanneer Instelling van disk ingesteld is, worden de
originele resolutie en videofrequentie gebruikt van de Blu-
ray Disc of DVD die wordt afgespeeld. U kunt de functie
voor het verbeteren van video’s van een extern apparaat
gebruiken.
Wanneer u een ander medium dan een Blu-ray Disc of
DVD afspeelt, wordt Auto gebruikt voor de resolutie en
videofrequentie.
Als u een Blu-ray Disc of DVD afspeelt met een resolutie
en videofrequentie die niet worden ondersteund door de
aangesloten tv, wordt er geen beeld weergegeven.
Beëindig in dat geval het afspelen en selecteer een andere
optie dan Instelling van disk.
Auto
*
, Instelling van disk, 480i/576i, 480p/576p, 720p, 1080i,
1080p
Om HD-audio (Dolby TrueHD of DTS-HD Master
Audio) uit te voeren via de HDMI-aansluiting, stelt u
HDMI Resolutie in op Auto of op meer dan 720p.
TV-systeem
U kunt het TV-systeem instellen op PAL, NTSC of Multi.
Kies hetzelfde TV-systeem als voor uw tv. Raadpleeg
voor meer informatie over uitgangsformaten “Over de
HDMI-video-uitgangsformaten” (p. 36).
Kleurruimte
U kunt de Kleurruimte (p. 41) kiezen die wordt gebruikt
voor HDMI. Deze functie is beschikbaar wanneer de
speler aangesloten is via een HDMI-kabel.
Deze functie is alleen beschikbaar op tv’s die deze
functie ondersteunen.
HDMI Deep Color
Wanneer uw tv en/of AV-ontvanger compatibel is met
Deep Color (p. 41), stelt u dit item in overeenstemming
met uw tv/AV-ontvanger in. Deze functie is beschikbaar
wanneer de speler aangesloten is via een HDMI-kabel.
30 bits, 36 bits, 48 bits, Uit
*
HDMI 1080p 24Hz
BD-Video gecodeerd met een framesnelheid van 24 Hz
wordt uitgevoerd in HDMI 1080p 24Hz. Met deze functie
kan een vloeiendere beeldweergave worden bereikt. Deze
functie is beschikbaar wanneer uw tv/AV-ontvanger deze
functie ondersteunt. Raadpleeg voor meer informatie over
uitgangsformaten “Over de HDMI-video-
uitgangsformaten” (p. 36).
Auto
*
, Uit
Deze instelling is uitgeschakeld wanneer de
uitgevoerde resolutie niet 1080p is.
Video Process
Ruisonderdrukking
U kunt de Ruisonderdrukking instellen op een niveau van
0 tot 3. 0 is uit en 3 is het maximumniveau.
0, 1, 2
*
, 3
De-interlacing Mode
U kunt instellen hoe het videosignaal gedetecteerd wordt.
Kies Auto voor normaal gebruik. Wanneer er horizontale
ruis verschijnt op het scherm, stelt u deze functie in op
Film/Video om de ruis te onderdrukken.
Auto
*
, Film, Video
Closed Caption
CC Attribute
U kunt de weergave van Closed Captions instellen.
Wanneer Auto is geselecteerd, worden digitale Closed
Captions weergegeven in standaardinstellingen. Wanneer
Custom is geselecteerd, kunt u de weergave van Closed
Captions (Font color, Font size enz.) handmatig
aanpassen.
Auto, Custom
Font color, Font size, Font style,
Font opacity, Font edge, Font edge color,
BG color, BG opacity, Window color,
Window opacity
Hiermee kunt u het lettertype, de achtergrond en het
venster aanpassen voor Closed Captions als CC Attribute
ingesteld staat op Custom.
Opmerking
NTSC, PAL, Multi
(De standaardinstellingen verschillen naargelang het model.)
YCbCr 4:4:4
*
Hiermee kunt u Kleurruimte instellen op YCbCr
4:4:4.
YCbCr 4:2:2 Hiermee kunt u Kleurruimte instellen op YCbCr
4:2:2.
Full RGB Wanneer RGB ingesteld is en de wit- en zwarttinten
op het scherm te flets zijn, selecteert u dit item. Deze
instelling werkt als een aangesloten component het
bereik RGB 0-255 ondersteunt.
RGB Hiermee wordt het videosignaal uitgevoerd met een
normaal signaalbereik.
Opmerking
Opmerking
34 Nl
SETUP-menu
Audio Setting
De standaardinstellingen zijn aangegeven met “
*
”.
Audio Output
Coaxial / Optical
U kunt de uitvoermodus voor de COAXIAL-aansluiting
en de OPTICAL-aansluiting selecteren. Raadpleeg voor
meer informatie over uitgangsformaten "Over de audio-
uitgangsformaten" (p. 35).
HDMI
U kunt de uitvoermodus voor de HDMI-aansluiting
selecteren. Zie “Coaxial / Optical” (p. 34) voor meer
informatie over instelitems. Raadpleeg voor meer informatie
over uitgangsformaten “Over de audio-uitgangsformaten”
(p. 35).
Bitstream
*
, PCM, Reencode, Uit
Om HD-audio (Dolby TrueHD of DTS-HD Master
Audio) uit te voeren via de HDMI-aansluiting, stelt u
HDMI Resolution in op Auto of op meer dan 720p
(p. 33).
Downsampling
U kunt de neerwaartse bemonsteringsfrequentie voor
digitale audiosignalen selecteren. Deze functie is
beschikbaar voor het audiosignaal dat wordt uitgevoerd
via de COAXIAL-aansluiting/OPTICAL-aansluiting.
DRC
U kunt DRC (Dynamic Range Compression)
(p. 41) inschakelen/uitschakelen/instellen op Auto.
Wanneer Auto ingesteld is, wordt DRC automatisch
ingeschakeld voor een bron met DRC-informatie in Dolby
TrueHD-indeling. DRC zorgt ervoor dat lage tonen nog
dieper klinken en conversaties verstaanbaarder worden.
Dit is nuttig wanneer u ’s avonds films bekijkt.
Uit, Aan, Auto
*
SACD Output
SACD Priority
Hiermee kunt u de afspeelprioriteit selecteren voor
tweekanaalsinhoud of meerkanaalsinhoud wanneer een
schijf beide types inhoud bevat.
Multi-ch
*
, 2-ch
SACD/CD Layer
Hiermee kunt u de laag instellen die moet worden
afgespeeld als een hybride SA-CD-/CD-schijf wordt
afgespeeld.
SACD
*
, CD
De SA-CD-aanduiding op het voorpaneel licht op
wanneer er een SA-CD geplaatst is en de SA-CD-
laag geselecteerd is.
Deze instelling is alleen beschikbaar wanneer er
geen schijf geplaatst is.
Er worden geen audiosignalen uitgevoerd via de
COAXIAL- of OPTICAL-uitgang (p. 13) wanneer
de SA-CD-laag geselecteerd is.
Luidsprekerinstellingen
2ch Downmix
U kunt de down-mixmethode instellen op 2-kanaals
analoog met Stereo of Lt/Rt.
Post Process
UpMix
U kunt het 2-kanaalsaudiosignaal omzetten naar meer
kanalen. Voor het omzetten naar meer kanalen selecteert u
DTS NEO:6 en daarna de modus Cinema of Muziek.
Uit
*
, DTS NEO:6
System Information
Hiermee kunt u de softwareversie en het MAC-adres
weergeven (p. 42).
Bitstream Voert digitale signalen uit zonder verwerking.
Secundaire audio wordt niet uitgevoerd.
PCM Voert 2-kanaals-PCM uit.
Reencode
*
Voert Bitstream uit met secundaire audio.
Uit Het geluid wordt gedempt.
Opmerking
48K
*
De hoogste bemonsteringsfrequentie voor digitale
PCM-uitvoer is 48 kHz.
96K De hoogste bemonsteringsfrequentie voor digitale
PCM-uitvoer is 96 kHz.
192K De hoogste bemonsteringsfrequentie voor digitale
PCM-uitvoer is 192 kHz.
Tip
Opmerkingen
Stereo
*
Wijzigt de kanaaluitvoer naar stereo, wat betekent
dat er alleen geluid wordt uitgevoerd door de twee
voorluidsprekers.
Lt/Rt Selecteer dit item als dit toestel aangesloten is op een
Dolby Pro Logic-decoder. Het geluid van de
achterluidsprekers wordt in het
2-kanaalsstereogeluid gemixt.
35 Nl
SETUP-menu
Instellingen
4
Nederlands
Over de audio-uitgangsformaten
*1 “SA” staat voor secundaire audio. “KKG” staat voor een knopklikgeluid, het geluidseffect voor pop-upmenu’s enz.
*2 Voor USB, DLNA en netwerkservices zijn PCM en gemixte 2-k niet beschikbaar (gedempt).
*3 Voor USB, DLNA en netwerkservices is Reencode niet beschikbaar (uitgevoerde audio zal hetzelfde formaat hebben
als bitstream).
Wanneer Coaxial / Optical of HDMI is ingesteld op Bitstream, wordt er geen secundaire audio uitgevoerd. (p. 34)
Om HD-audio (Dolby TrueHD of DTS-HD Master Audio) uit te voeren via de HDMI-aansluiting, stelt u HDMI
Resolutie in op Auto of op meer dan 720p (p. 33).
SA-CD-uitgangsformaten
Bronformaat
HDMI COAXIAL / OPTICAL MIXED 2CH
Bitstream PCM Reencode Bitstream PCM Reencode
PCM 2-k
met SA of
KKG
*1
PCM 2-k Dolby Digital PCM 2-k Dolby Digital 2-k
zonder SA of
KKG
*1
PCM 2-k PCM 2-k 2-k
PCM 5.1-k
met SA of
KKG
*1
PCM 5.1-k Dolby Digital PCM 2-k Dolby Digital 2-k
zonder SA of
KKG
*1
PCM 5.1-k PCM 2-k 2-k
PCM 7.1-k
met SA of
KKG
*1
PCM 7.1-k Dolby Digital PCM 2-k Dolby Digital 2-k
zonder SA of
KKG
*1
PCM 7.1-k PCM 2-k 2-k
Dolby Digital
met SA of
KKG
*1
Dolby Digital PCM tot 5.1-k Dolby Digital Dolby Digital PCM 2-k Dolby Digital 2-k
zonder SA
of
KKG
*1
Dolby Digital
Plus
met SA of
KKG
*1
Dolby Digital
Plus
PCM tot 7.1-k
Dolby Digital
Dolby Digital PCM 2-k Dolby Digital 2-k
zonder SA
of
KKG
*1
Dolby Digital
Plus
Dolby
TrueHD
met SA of
KKG
*1
Dolby
TrueHD
PCM tot 7.1-k
Dolby Digital
Dolby Digital PCM 2-k Dolby Digital 2-k
zonder SA
of
KKG
*1
Dolby
TrueHD
DTS
met SA of
KKG
*1
DTS
PCM tot
5.1-k
*2
DTS
*3
DTS
PCM 2-k
*2
DTS
*3
2-k
*2
zonder SA
of
KKG
*1
DTS HD High
Resolution
met SA of
KKG
*1
DTS-HD High
Resolution
PCM tot
7.1-k
*2
DTS
*3
DTS
PCM 2-k
*2
DTS
*3
2-k
*2
zonder SA
of
KKG
*1
DTS HD High
Resolution
*3
DTS-HD
Master Audio
met SA of
KKG
*1
DTS-HD
Master Audio
PCM tot
7.1-k
*2
DTS
*3
DTS
PCM 2-k
*2
DTS
*3
2-k
*2
zonder SA
of
KKG
*1
DTS-HD
Master
Audio
*3
Opmerkingen
SACD Priority-instelling (p. 34)
HDMI COAXIAL / OPTICAL
MIXED 2CH
Multi-ch PCM tot 5.1-k Geen uitvoer 2-k
2-ch PCM tot 2-k Geen uitvoer 2-k
36 Nl
SETUP-menu
Over de HDMI-video-uitgangsformaten
Wanneer TV-systeem ingesteld is op NTSC
Wanneer TV-systeem ingesteld is op PAL
*1 De resolutie wordt ingesteld op de maximale resolutie die wordt ondersteund door de aangesloten tv. Als de maximale
resolutie die wordt ondersteund door de aangesloten tv bijvoorbeeld 1080p is, wordt de resolutie ingesteld op 1080p.
*2 De resolutie en frequentie van de bronschijf wordt gebruikt.
*3 Als Auto ingesteld is voor HDMI 1080p 24Hz en de aangesloten tv ondersteuning biedt voor 1080p 24Hz-inhoud, zal
1080p 24 Hz uitgevoerd worden in plaats van 1080p 50/60 Hz.
Wanneer TV-systeem ingesteld is op Multi
Wanneer TV-systeem ingesteld is op Multi, wordt het videosignaal uitgevoerd met dezelfde frequentie als de bron.
Raadpleeg de bovenstaande tabellen voor meer informatie over de frequentie-instelling van de tv en de resolutie van het
uitgevoerde videosignaal.
De instelling HDMI 1080p 24Hz is uitgeschakeld wanneer de uitgevoerde resolutie niet 1080p is.
Wanneer TV-systeem ingesteld is op NTSC en de videobron geen 60 Hz is, wordt het uitgevoerde videosignaal
omgezet naar 60 Hz.
Wanneer TV-systeem ingesteld is op PAL en de videobron geen 50 Hz is, wordt het uitgevoerde videosignaal
omgezet naar 50 Hz.
Inhoudsopgave
HDMI Resolutie
Auto
Instelling van
disk
1080p 1080i 720p 480p/576p 480i/576i
BD-Video met
1080p/24Hz-inhoud
*
1
1080p 24Hz
1080p 24Hz/
60Hz
*3
1080i 60Hz 720p 60Hz 480p 480i
BD-Video zonder
1080p/24Hz-inhoud
*
1
*
2
1080p 60Hz 1080i 60Hz 720p 60Hz 480p 480i
DVD-Video
*
1
*
2
1080p 60Hz 1080i 60Hz 720p 60Hz 480p 480i
Overige
*
1
*
1
1080p 60Hz 1080i 60Hz 720p 60Hz 480p 480i
Inhoudsopgave
HDMI Resolutie
Auto
Instelling van
disk
1080p 1080i 720p 480p/576p 480i/576i
BD-Video met
1080p/24Hz-inhoud
*
1
1080p 24Hz
1080p 24Hz/
50Hz
*3
1080i 50Hz 720p 50Hz 576p 576i
BD-Video zonder
1080p/24Hz-inhoud
*
1
*
2
1080p 50Hz 1080i 50Hz 720p 50Hz 576p 576i
DVD-Video
*
1
*
2
1080p 50Hz 1080i 50Hz 720p 50Hz 576p 576i
Overige
*
1
*
1
1080p 50Hz 1080i 50Hz 720p 50Hz 576p 576i
Opmerkingen
37 Nl
Instellingen
4
Nederlands
Indien nodig wordt er nieuwe software uitgebracht die extra functies of productverbeteringen levert. We raden aan om de
software van deze speler regelmatig te upgraden naar de nieuwste versie.
Om na te gaan of er een software-upgrade beschikbaar is, gaat u naar
http://download.yamaha.com/
Terwijl de software-upgrade wordt uitgevoerd, mag u het USB-geheugenapparaat niet verwijderen, de speler niet
in de stand-bystand zetten en het netsnoer/de netwerkkabel niet loskoppelen.
De software upgraden
1. Maak de nodige voorbereidingen
voor de software-upgrade.
Wanneer u de software upgradet via USB Storage:
1 Bewaar het pakket met upgradebestanden in de
juiste map op het USB-geheugenapparaat.
Raadpleeg het proceduredocument dat
bijgevoegd is bij het pakket met
upgradebestanden voor meer informatie.
2 Sluit het USB-geheugenapparaat aan.
Wanneer u de software upgradet via Netwerk:
Controleer of de speler aangesloten is op het
netwerk.
2. Selecteer de upgrademethode en
start de upgrade via het SETUP-
menu.
1 Druk op SETUP om het SETUP-menuscherm
weer te geven.
2 Selecteer Instellingen Algemeen = Systeem =
Bijwerken.
3 Selecteer het item dat het pakket met
upgradebestanden bevat uit USB Storage/
Netwerk.
Het systeem gaat op zoek naar het pakket met
upgradebestanden.
3. Upgrade de software door de
instructies op het scherm te
volgen.
De upgrade is voltooid. Het systeem wordt gereset.
Software-upgrade
Opmerking
38 Nl
AANVULLENDE INFORMATIE
Raadpleeg de tabel hieronder wanneer de speler niet naar behoren functioneert. Als het probleem niet hieronder vermeld
staat of als de aanwijzingen het probleem niet verhelpen, schakelt u de speler uit, haalt u de stekker uit het stopcontact en
neemt u contact op met uw dichtstbijzijnde Yamaha-dealer of -servicecentrum.
Stroom
Basisbediening
Afspelen van schijven
Problemen oplossen
Probleem Mogelijke oorzaken en oplossingen
Geen stroom. Sluit het netsnoer correct aan.
–Druk op p op het voorpaneel om de speler in te schakelen.
De speler wordt vanzelf uitgeschakeld. De speler wordt automatisch uitgeschakeld wanneer er gedurende 20 minuten geen
activiteiten worden uitgevoerd (geen afspelen) wanneer de Auto Power Standby (p. 30)
is ingeschakeld.
Probleem Mogelijke oorzaken en oplossingen
De afstandsbediening werkt niet. Gebruik de afstandsbediening binnen het opgegeven werkzame bereik. (p. 10)
Vervang de batterijen. (p. 10)
Controleer de ID-instellingen van het hoofdapparaat en de afstandsbediening. Het ID
van de afstandsbediening op het hoofdapparaat is mogelijk gewijzigd na het resetten
van het hoofdapparaat. Controleer in dat geval het ID van de afstandsbediening op het
hoofdapparaat en stel het indien nodig opnieuw in. (p. 10)
De knoppen werken niet.
Houd p op het voorpaneel langer dan 5 seconden ingedrukt om de speler te resetten.
Om de speler volledig te resetten, verwijdert u gedurende 30 seconden of langer het
netsnoer uit het stopcontact, sluit u het netsnoer opnieuw aan en schakelt u vervolgens
de speler in.
Wachtwoord vergeten.
Houd op het voorpaneel , en gelijktijdig ingedrukt als er geen schijf is
geplaatst en het afspelen is gestopt. Zo kunt u alle instellingen, inclusief de Veiligheid-
instellingen (p. 31), van deze speler op hun standaardinstellingen instellen. Nadat de
netvoeding automatisch is uitgeschakeld, drukt u op p om de netvoeding weer in te
schakelen.
Probleem Mogelijke oorzaken en oplossingen
De speler kan geen schijf afspelen. Haal de schijf eruit en maak deze schoon. (p. 5)
Controleer of de schijf juist geplaatst is (in de uitsparing van de schijflade en met de
labelkant naar boven). (p. 5)
Gebruik een schijf die wordt ondersteund door de speler. (p. 3)
Verwijder de schijf en controleer of deze wordt ondersteund door de speler. (p. 3)
Controleer de regiocode. (p. 3)
Controleer of de schijf defect is door een andere schijf te testen.
Een CD-R/RW, DVD+R/RW/R DL en DVD-R/RW/R DL moet gefinaliseerd zijn.
(p. 3)
De video stopt. De speler stopt als deze schokken of trillingen vaststelt.
De speler maakt een klikkend geluid
wanneer deze met het afspelen begint of
bij het laden van een schijf.
Deze geluiden duiden niet op een defect van de speler, maar zijn normale
werkingsgeluiden.
Het kost tijd om met het afspelen van
een Blu-ray Disc te beginnen.
De speler zoekt naar een USB-geheugenapparaat dat wordt gebruikt als Externe opslag
voor de BD-Live-functie (p. 26) wanneer een Blu-ray Disc is geplaatst. Zorg ervoor dat
een USB-geheugenapparaat op een van de USB-poorten (voorkant/achterkant) van deze
speler (p. 16) aangesloten blijft om de wachttijd te verminderen.
39 Nl
Problemen oplossen
Aanvullende informatie
5
Nederlands
Beeld
Geluid
Netwerk
Probleem Mogelijke oorzaken en oplossingen
Geen beeld. Controleer of de kabels juist zijn aangesloten. (p. 11)
Controleer of de juiste ingang op de aangesloten tv of de AV-ontvanger is gekozen.
Houd op het voorpaneel en gelijktijdig ingedrukt als er geen schijf is geplaatst
of het afspelen is gestopt om de standaardwaarde in te stellen voor de videoresolutie.
Als er nog steeds geen beeld wordt weergegeven, houdt u op het voorpaneel
gedurende ongeveer 5 seconden ingedrukt om de instelling voor NTSC/PAL te
wijzigen.
Wanneer Instelling van disk ingesteld is, wordt er een signaal uitgevoerd dat niet
ondersteund wordt door de aangesloten tv. Wijzig de instelling zodat er een signaal
wordt uitgevoerd dat ondersteund wordt door de aangesloten tv. (p. 33)
Controleer of de schijf die of het bestand dat u probeert af te spelen compatibel is met
deze speler (p. 3).
Het beeld bevriest en de
bedieningstoetsen werken niet.
Druk op en start het afspelen opnieuw.
Schakel de speler uit en dan weer in.
Houd p op het voorpaneel langer dan 5 seconden ingedrukt om de speler te resetten.
Video wordt niet uitgevoerd met de
gewenste resolutie.
Stel de gewenste resolutie in. (p. 33)
Breedbeeldvideo’s worden verticaal
uitgerekt of er zijn zwarte banden
zichtbaar aan de boven- en onderrand
van het tv-scherm. Of 4:3-video wordt
horizontaal uitgerekt.
Wijzig de beeldverhouding van uw tv. (p. 32)
Het beeld bevat blokruis
(mozaïekpatroon).
Scènes met snelle bewegingen kunnen blokruis vertonen als gevolg van de
eigenschappen van de digitale beeldcompressietechnologie.
Probleem Mogelijke oorzaken en oplossingen
Geen geluid of het geluid is vervormd. Controleer of de audiokabel juist is aangesloten. (p. 11)
Draai het volume van de tv of AV-ontvanger omhoog.
Er is geen geluid tijdens weergave van een stilstaand beeld of versnelde weergave in
voor- of achterwaartse richting. (p. 9)
Het is mogelijk dat het geluid niet wordt uitgevoerd afhankelijk van de toestand van de
audio-opname, bijvoorbeeld wanneer er andere audio dan een audiosignaal of niet-
standaardaudio is opgenomen als audiomateriaal. (p. 3)
Controleer of de schijf die of het bestand dat u probeert af te spelen compatibel is met
deze speler (p. 3).
Het linker- en rechterkanaal van het
geluidssignaal is omgekeerd of er komt
slechts van één kant geluid.
Controleer de audioverbinding. (p. 13)
Het gewenste type audio en/of aantal
kanalen kan niet gehoord worden.
Raadpleeg de Audio Output-instelling en “Over de audio-uitgangsformaten”.
(p. 34, p. 35)
Het geluid van PIP (secundaire audio) is
niet hoorbaar.
Stel Coaxial / Optical of HDMI in op PCM/Reencode. (p. 34)
Druk op 2ND AUDIO om secundaire audio te beluisteren. (p. 8)
Afhankelijk van de schijf moet u de secundaire audio inschakelen via het hoofdmenu
van de schijf (p. 9).
Probleem Mogelijke oorzaken en oplossingen
Kan geen verbinding met het internet
maken.
Zorg ervoor dat de netwerkkabel goed aangesloten is als u verbinding maakt met het
internet door Bedraad bij Verbindingsinstelling te selecteren. (p. 31)
Schakel de aangesloten apparatuur zoals een breedbandrouter of modem in.
Sluit de breedbandrouter en/of modem juist aan.
Als Wireless geselecteerd is bij Verbindingsinstelling en u via ethernet verbinding wilt
maken met het internet, selecteert u Bedraad. (p. 31)
Selecteer Wireless bij Verbindingsinstelling als u via een draadloos LAN verbinding
wilt maken met het internet. (p. 31)
40 Nl
Problemen oplossen
Meldingen op het scherm
De volgende meldingen verschijnen op het tv-scherm wanneer de schijf die u probeert af te spelen niet geschikt is
of als de uitgevoerde bediening niet juist is.
Kan geen BD-Live-inhoud downloaden. Controleer of de internetverbinding werkt op de speler. Raadpleeg “Verbindingstest”.
(p. 32)
Sluit het USB-geheugenapparaat correct aan. Controleer of het USB-geheugenapparaat
op de USB-poort van deze speler is aangesloten. (p. 16)
Controleer of de Blu-ray Disc BD-Live ondersteunt.
Sluit een USB-geheugenapparaat aan dat geformatteerd is in FAT16, FAT32 of NTFS.
Wij raden u aan om een USB-geheugenapparaat met minstens 2 GB vrije ruimte aan te
sluiten. Als er onvoldoende vrije ruimte is, formatteert u het USB-geheugenapparaat.
(p. 30)
Raadpleeg de bijgeleverde gebruikershandleiding van de schijf of raadpleeg de
schijffabrikant.
Kan de DLNA-server niet vinden. Controleer of de netwerkverbinding werkt op de speler. Raadpleeg “Verbindingstest”.
(p. 32)
Schakel de aangesloten apparatuur zoals een breedbandrouter of server in.
Controleer of de speler en server aangesloten zijn op dezelfde router (of toegangspunt).
Afhankelijk van de DLNA-server, is het mogelijk dat u de speler moet machtigen bij de
server.
Afhankelijk van de DLNA-server moet er een firewallinstelling gewijzigd worden.
Kan een bestand niet afspelen op de
DLNA-server.
Controleer of het bestand kan worden afgespeeld. (p. 3)
Controleer de instellingen van uw DLNA-server.
De afspeel- en bedieningskwaliteit kunnen beïnvloed worden door de status van uw thuisnetwerk.
Kan geen verbinding met het internet
maken via draadloos LAN.
Zorg ervoor dat de router voor draadloos LAN ingeschakeld is.
Afhankelijk van omgevingsfactoren (bv. het materiaal van de muren, de
ontvangstomstandigheden voor radiogolven of obstakels tussen de speler en de router
voor draadloos LAN) kan de communicatieafstand korter zijn. Plaats de speler en de
router voor draadloos LAN dichter bij elkaar.
Apparaten die gebruik maken van een frequentieband van 2,4 GHz, zoals een magnetron,
Bluetooth-apparaat of een digitaal draadloos apparaat, kunnen de communicatie
verstoren. Plaats de speler uit de buurt van dergelijke apparaten of schakel deze uit.
Als u na het uitvoeren van de bovenstaande oplossingen nog steeds geen verbinding met
het internet kunt maken via een draadloos LAN, kunt u er beter voor kiezen verbinding
te maken via ethernet door Bedraad te selecteren bij Verbindingsinstelling. (p. 31)
Draadloos netwerk werd niet gevonden
of wordt gestoord.
Zorg ervoor dat de router voor draadloos LAN ingeschakeld is.
Plaats de speler dichter bij de router of verander de oriëntatie van deze speler of de
antenne van de router.
Als de draadloze verbinding niet geconfigureerd kan worden met behulp van de WPS-
functie, selecteer dan een andere optie (Scannen of Handm.) (p. 18).
Zorg ervoor dat het draadloze netwerk niet gestoord wordt door magnetrons, digitale
draadloze telefoons of andere Wi-Fi-apparaten.
Magnetrons, digitale draadloze telefoons en andere draadloze apparaten in de nabije
omgeving kunnen het draadloze netwerk storen. Schakel deze apparaten uit.
Zorg ervoor dat de firewalls in uw netwerk de draadloze toegang tot uw speler niet
blokkeren.
Als het draadloze netwerk niet goed functioneert bij u thuis, kunt u beter kiezen voor
netwerkverbinding via een ethernetkabel.
Foutmelding Mogelijke oorzaken en oplossingen
Niet ondersteund bestand Dit bestand wordt niet ondersteund door de speler. Zie “Schijf-/bestandstypes die u met deze speler
kunt gebruiken” (p. 3).
Verkeerde regiocode! De schijf heeft een niet-ondersteunde regiocode. Zie “Regiobeheerinformatie voor Blu-ray Disc-/
DVD-video’s” (p. 3).
Netwerk is MISLUKT. De speler kan niet worden aangesloten op het netwerk. Controleer de verbinding (p. 14) en de
Netwerk-instelling (p. 31).
Netwerk is OK, proxy is
MISLUKT.
De speler kan niet worden aangesloten op de proxyserver. Zie “Proxy instellen” (p. 32).
BD-live connectie is niet
ondersteund in SETUP menu
BD-live-verbinding is niet toegestaan. Zie “BD-Live-verbinding” (p. 32).
Upgrade is mislukt om een
aantal redenen!
De upgrade is mislukt. Controleer of het upgradebestand corrupt of onleesbaar is.
IP-instelling is niet geldig!
Reset deze
De ingevoerde IP Setting is niet geldig. Voer de correcte informatie opnieuw in.
Probleem Mogelijke oorzaken en oplossingen
41 Nl
Aanvullende informatie
5
Nederlands
AVCHD
AVCHD is een nieuw formaat (standaard) voor HD-
videocamera’s dat gebruikt kan worden voor het
opnemen en afspelen van HD-beelden met een hoge
resolutie.
BD-Live™
BD-Live is een Blu-ray Disc-standaard die gebruik
maakt van een netwerkverbinding waarmee deze speler
online kan gaan en promotionele video’s en andere
gegevens kan downloaden.
BDMV
BDMV (Blu-ray Disc Movie) verwijst naar een van de
toepassingsformaten die gebruikt worden voor BD-
ROM, wat een van de Blu-ray Disc-specificaties is.
BDMV is een opnameformaat zoals DVD-Video van de
DVD-specificatie.
Blu-ray 3D™
Met Blu-ray 3D kunt u 3D-beelden volledig in HD
weergeven.
BONUSVIEW™
Bij schijven die compatibel zijn met BONUSVIEW
kunt u tegelijk van een videosubkanaal voor twee
schermen, een audiosubkanaal en ondertiteling genieten.
Een klein scherm wordt weergegeven op het
hoofdscherm tijdens het afspelen (beeld-in-beeld).
Closed Caption
“Closed Captions” zijn een soort ondertitels; het
verschil tussen gewone ondertitels en “captions” is dat
ondertitels bedoeld zijn voor mensen zonder
gehoorproblemen en “captions” voor gehoorgestoorden.
Ondertitels geven zelden alle geluiden weer.
Bijschriften tonen bijvoorbeeld ook geluidseffecten (bv.
telefoon rinkelt en voetstappen), wat niet het geval is bij
ondertitels. Voor u deze instelling selecteert, controleert
u of de disc ondertiteling voor gehoorgestoorden bevat.
Kleurruimte
Kleurruimte is een kleurbereik dat kan worden
voorgesteld. RGB is een kleurruimte gebaseerd op het
RGB-kleurenmodel (rood, groen en blauw) en wordt
vooral gebruikt voor pc-schermen. YCbCr is een
kleurruimte gebaseerd op een luminantiesignaal (Y) en
twee kleurverschilsignalen (Cb en Cr).
Deep Color
Deep Color verwijst naar het gebruik van verschillende
kleurdieptes in schermen vanaf de 24 bitdieptes van
vorige versies van de HDMI-specificatie. Deze extra
bitdiepte zorgt ervoor dat HD-tv’s en andere schermen
kunnen overschakelen van miljoenen kleuren naar
miljarden kleuren en elimineert kleurverloop op het
scherm zodat er vloeiende toonovergangen en subtiele
gradaties tussen kleuren worden bekomen. De
verhoogde contrastverhouding kan veel meer grijstinten
weergeven tussen zwart en wit. Deep Color verhoogt
eveneens het aantal beschikbare kleuren binnen de
grenzen afgebakend door de RGB- of YCbCr-
kleurruimte.
DLNA
Met DLNA (Digital Living Network Alliance) kunnen
digitale media eenvoudig worden gedeeld via een
thuisnetwerk en kunt u met uw tv via deze speler
genieten van digitale inhoud opgeslagen op uw pc
waarop DLNA-serversoftware is geïnstalleerd of een
ander apparaat dat DLNA ondersteunt. Om deze speler
te verbinden met uw DLNA-servers, moeten bepaalde
instellingen voor de DLNA-server of het DLNA-
apparaat worden doorgevoerd. Meer informatie vindt u
in uw DLNA-serversoftware of uw DLNA-apparaat.
DivX®
DivX® is een digitale video-indeling die ontwikkeld is
door DivX, LLC, een dochteronderneming van Rovi
Corporation. Dit is een officieel DivX Certified®-
apparaat dat DivX-video afspeelt. Ga naar divx.com
voor meer informatie en softwareprogramma’s om uw
bestanden naar DivX-video’s om te zetten.
Dolby Digital
Een geluidssysteem ontwikkeld door Dolby
Laboratories Inc. dat een geluidssignaal met de sfeer
van een bioscoopzaal genereert wanneer het apparaat op
een Dolby Digital-processor of -versterker is
aangesloten.
Dolby Digital Plus
Een geluidssysteem ontwikkeld als uitbreiding van
Dolby Digital. Deze audiocoderingstechnologie
ondersteunt 7.1-meerkanaalssurroundgeluid.
Dolby TrueHD
Dolby TrueHD is een verliesvrije coderingstechnologie
die meerkanaalssurroundgeluid bestaande uit maximaal
8 kanalen ondersteunt voor gebruik met optische
schijven van de volgende generatie. Het weergegeven
geluid is bit voor bit getrouw aan het oorspronkelijke
brongeluid.
DRC (Dynamic Range Control)
Met DRC kunt u het bereik tussen de luidste en de
zachtste geluiden (dynamisch bereik) instellen bij het
afspelen met een gemiddeld volume. Gebruik deze optie
wanneer dialogen moeilijk hoorbaar zijn of wanneer het
afspelen de buren kan storen.
DTS
Dit is een digitaal geluidssysteem ontwikkeld door DTS,
Inc. voor gebruik in bioscopen.
DTS-HD High Resolution Audio
DTS-HD High Resolution Audio is een nieuwe
technologie die ontwikkeld is voor het optische HD-
schijfformaat van de volgende generatie.
DTS-HD Master Audio
DTS-HD Master Audio is een verliesvrije
audiocompressietechnologie die ontwikkeld is voor het
optische HD-schijfformaat van de volgende generatie.
Woordenlijst
42 Nl
Woordenlijst
FLAC
FLAC (Free Lossless Audio Codec) is een open
bestandsformaat voor een verliesvrije compressie van
audiogegevens. Dit formaat heeft een lagere
compressieverhouding dan andere gecomprimeerde
audioformaten waarbij wel gegevens verloren gaan,
maar biedt vaak een betere audiokwaliteit.
HDMI
HDMI (High-Definition Multimedia Interface) is een
interface die zowel video als audio ondersteunt via een
enkele digitale verbinding. De HDMI-verbinding brengt
standaard- tot hogedefinitievideosignalen en
meerkanaalsaudiosignalen in digitale vorm, dus zonder
kwaliteitsverlies, over naar AV-apparatuur zoals tv’s
uitgerust met HDMI.
Letter Box (LB 4:3)
Een beeldformaat met zwarte banden boven en onder
aan het scherm om breedbeeldmateriaal (16:9) op een
aangesloten normale 4:3-tv te kunnen weergeven.
Lineair PCM-geluid
Lineaire PCM is een signaalopnameformaat dat gebruikt
wordt voor Audio-CD’s en voor sommige DVD-
schijven en Blu-ray-schijven. Het geluid op Audio-CD’s
wordt opgenomen bij een bemonsteringsfrequentie van
44,1 kHz en met 16 bits. (Het geluid wordt opgenomen
tussen 48 kHz met 16 bits en 96 kHz met 24 bits op
DVD-schijven en tussen 48 kHz met 16 bits en 192 kHz
met 24 bits op Blu-ray-schijven.)
Mac-adres
Het Mac-adres is een unieke waarde die wordt
toegekend aan een netwerkapparaat voor
identificatiedoeleinden.
Pan Scan (PS 4:3)
Een beeldformaat waarbij de zijkanten van het beeld
zijn afgesneden om breedbeeldmateriaal (16:9) op een
aangesloten normale 4:3-tv te kunnen weergeven.
Ondertitels
Dit zijn de tekstregels die onderaan op het scherm
worden getoond en die de dialoog vertalen of
beschrijven. Ondertiteling is opgenomen op de meeste
DVD- en Blu-ray-schijven.
x.v.Color
x.v.Color produceert een groter bereik aan kleuren dan
voorheen, waarbij praktisch alle kleuren kunnen worden
weergegeven die het menselijke oog kan waarnemen.
43 Nl
Aanvullende informatie
5
Nederlands
Algemeen
Stroomvoorziening
[Modellen voor het VK, Europa, Rusland en Australië]
................................................................................AC 110–240 V, 50 Hz
[Modellen voor Azië en Centraal- en Zuid-Amerika]
...........................................................................AC 110–240 V, 50/60 Hz
[Andere modellen] .................................................AC 110–240 V, 60 Hz
Stroomverbruik..................................................................................... 17 W
Stroomverbruik (stand-by)
HDMI Control Uit, Netwerk Standby Uit......................... 0,2 W (typisch)
HDMI Control Aan, Netwerk Standby Uit ....................... 0,3 W (typisch)
HDMI Control Uit, Netwerk Standby Aan .......................5,5 W (typisch)
HDMI Control Aan, Netwerk Standby Aan......................5,5 W (typisch)
Afmetingen (B × H × D, inclusief uitstekende delen)... 435 × 86 × 257 mm
Gewicht ............................................................................................... 2,7 kg
Audioprestaties
Audio-uitgangsniveau (1 kHz, 0 dB)
Blu-ray Disc/DVD/CD-DA.........................................................2 ± 0,3 V
Signaal-ruisverhouding
Blu-ray Disc/DVD/CD-DA............................................................ 115 dB
Dynamisch bereik
Blu-ray Disc/DVD ......................................................................... 105 dB
CD-DA ........................................................................................... 100 dB
Harmonische vervorming (1 kHz)
Blu-ray Disc/DVD/CD-DA............................................................0,003%
Frequentierespons
Blu-ray Disc/DVD ...................... 4 Hz tot 22 kHz (48kHz-bemonstering)
4 Hz tot 44 kHz (96kHz-bemonstering)
CD-DA ............................................................................. 4 Hz tot 20 kHz
Ingangen/uitgangen
HDMI-uitgang ..........................................................Type A-aansluiting × 1
480i/576i/480p/576p/720p/1080i/1080p/1080p@24Hz,
Deep Color-, x.v. Color-ondersteuning
Digitale uitgang ....................................................Optisch × 1, Coaxiaal × 1
Analoge audio-uitgang ................................................. Gemengd 2-kan. × 1
USB ..........................................................................Type A-aansluiting × 2
Draadloos LAN ............................................. Standaard: IEEE 802.11 b/g/n
Frequentiebereik: 2,4GHz-band
Overige apparatuur .......................................................Remote IN/OUT × 1
Ethernet × 1
Wijzigingen in specificaties voorbehouden zonder voorafgaande
kennisgeving.
Auteursrechten
Audiovisueel materiaal kan bestaan uit materiaal met
auteursrecht dat niet mag worden opgenomen zonder
toestemming van de eigenaar van het auteursrecht.
Raadpleeg de relevante wetten in uw land.
“Blu-ray Disc™”, “Blu-ray™”, “Blu-ray 3D™”, “BD-
Live™”, “BONUSVIEW™” en de overeenstemmende
logo’s zijn handelsmerken van de Blu-ray Disc Association.
is een handelsmerk van DVD Format/Logo
Licensing Corporation.
Gefabriceerd onder licentie van Dolby Laboratories.
Dolby en het dubbele D-symbool zijn handelsmerken van
Dolby Laboratories.
Vervaardigd onder licentie onder de Amerikaanse
patentnummers: 5,956,674; 5,974,380; 6,226,616;
6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 en
andere reeds uitgegeven en aangevraagde patenten in de
VS en de rest van de wereld. DTS-HD, het
overeenkomstige symbool en DTS-HD gecombineerd met
het overeenkomstige symbool zijn gedeponeerde
handelsmerken en DTS-HD Master Audio is een
handelsmerk van DTS, Inc.
Product bevat software. © DTS, Inc. Alle rechten
voorbehouden.
“HDMI”, het “HDMI”-logo en High Definition
Multimedia Interface zijn handelsmerken of gedeponeerde
handelsmerken van HDMI Licensing LLC in de
Verenigde Staten en andere landen.
x.v.Color™
“x.v.Color” en het “x.v.Color”-logo zijn handelsmerken
van Sony Corporation.
“AVCHD” en het “AVCHD”-logo zijn handelsmerken
van Panasonic Corporation en Sony Corporation.
Specificaties
Opmerking
Vervolg op de volgende pagina. \
44 Nl
Specificaties
Java is een gedeponeerd handelsmerk van Oracle en/of
zijn dochterondernemingen.
DLNA™ en DLNA CERTIFIED™ zijn handelsmerken of
gedeponeerde handelsmerken van Digital Living Network
Alliance. Alle rechten voorbehouden. Ongeoorloofd
gebruik is strikt verboden.
Het Wi-Fi CERTIFIED-logo is een certificaatmerk van
Wi-Fi Alliance.
Wi-Fi Protected Setup Identifier Mark is een merk van
Wi-Fi Alliance.
“Wi-Fi”, “Wi-Fi Protected Setup”, “Wi-Fi Direct” en
“Miracast” zijn merken of gedeponeerde merken van
Wi-Fi Alliance.
Dit product is gelicentieerd onder de AVC-
patentportfoliolicentie en de VC-1-patentportfoliolicentie
voor het persoonlijk en niet-commerciële gebruik van een
consument om (i) video te coderen in overeenstemming
met de AVC-norm en VC-1-norm (“AVC/VC-1 Video”)
en/of (ii) AVC/VC-1 Video te decoderen die werd
gecodeerd door een consument in het kader van een
persoonlijke en niet-commerciële activiteit en/of die is
verkregen van een videoaanbieder die gelicentieerd is om
AVC/VC-1 Video aan te bieden. Er wordt geen licentie
toegekend of impliciet aangenomen voor enig ander
gebruik. Extra informatie kan worden verkregen van
MPEG LA, LLC. Zie http://www.mpegla.com.
Dit product is gelicentieerd onder de MVC-
patentportfoliolicentie voor het persoonlijk gebruik van
een consument of ander gebruik waarbij geen vergoeding
wordt ontvangen om (i) video te coderen in
overeenstemming met de MVC-norm (“MVC Video”) en/
of (ii) MVC Video te decoderen die werd gecodeerd door
een consument in het kader van een persoonlijke activiteit
en/of die is verkregen van een videoaanbieder die
gelicentieerd is om MVC Video aan te bieden. Er wordt
geen licentie toegekend of impliciet aangenomen voor enig
ander gebruik. Extra informatie kan worden verkregen van
MPEG LA, LLC. Zie http://www.mpegla.com
Windows Media Player is een gedeponeerd handelsmerk
of een handelsmerk van Microsoft corporation in de
Verenigde Staten en/of andere landen
Copyright 2004-2012 Verance Corporation. Cinavia® is een
handelsmerk van Verance Corporation. Beschermd door het
Amerikaanse patent 7,369,677 en andere reeds uitgegeven
en aangevraagde wereldwijde patenten onder licentie van
Verance Corporation. Alle rechten voorbehouden.
DivX®, DivX Certified®, DivX Plus® HD en verwante
logo’s zijn handelsmerken van Rovi Corporation of zijn
dochterondernemingen, en worden onder licentie gebruikt.
DivX Certified® voor het afspelen van DivX®- en DivX
Plus® HD-video (H.264/.MKV) tot 1080p HD, inclusief
hoogwaardige inhoud.
OVER DIVX VIDEO: DivX® is een digitale video-
indeling die ontwikkeld is door DivX, LLC, een
dochteronderneming van Rovi Corporation. Dit is een
officieel DivX Certified®-apparaat dat is geslaagd voor
uitgebreide onderzoeken om te verifiëren dat het DivX-
video afspeelt. Ga naar divx.com voor meer informatie en
softwareprogramma’s om uw bestanden naar DivX-video’s
om te zetten.
OVER DIVX VIDEO-ON-DEMAND: dit DivX
Certified®-apparaat moet geregistreerd zijn om gekochte
DivX Video-on-Demand (VOD)-films te kunnen afspelen.
Om de registratiecode aan te maken, gaat u naar het
onderdeel DivX VOD in het instellingenmenu van het
apparaat. Ga naar vod.divx.com voor meer informatie over
hoe uw registratie te voltooien.
45 Nl
Aanvullende informatie
5
Nederlands
AANVULLENDE INFORMATIE
Cijfers
2ch Downmix, SETUP-menu ..............34
2ND AUDIO, afstandsbediening ...........8
3D Playback bericht, SETUP-menu ....30
3D Uitgang, SETUP-menu ..................32
A
A/B, afstandsbediening ..........................9
Afspelen van een gegevensschijf .........19
Afspelen van USB-inhoud ...................19
Afspelen, SETUP-menu .......................31
Afstandsbediening .................................8
Angle Mark, SETUP-menu ..................31
ANGLE, afstandsbediening ...................9
Audio Output, SETUP-menu ...............34
Audio Setting, SETUP-menu ...............34
AUDIO, afstandsbediening ....................9
Audio, schermmenu .............................23
Audio, SETUP-menu ...........................31
Audio-uitgangsformaten ......................35
Auto Power Standby, SETUP-menu ....30
AV CONTROLLER ............................22
B
BD-Live ...............................................26
BD-Live-verbinding, SETUP-menu ....32
Bedieningstoetsen, afstandsbediening ...9
Beeld-in-beeldfunctie ...........................26
Bijwerken, SETUP-menu ....................30
Bitrate, schermmenu ............................23
C
Cijfertoetsen, afstandsbediening ............8
CLEAR, afstandsbediening ...................8
Closed Caption, SETUP-menu ............33
Coaxial / Optical, SETUP-menu ..........34
Code Page, schermmenu ......................23
Cursortoetsen, afstandsbediening ..........9
D
De-interlacing Mode, SETUP-menu ....33
Digital Media Controller (DMC) .........15
Display Setting, SETUP-menu ............32
DivX (R) VOD DRM,
SETUP-menu ...................................31
DLNA ..................................................15
Downsampling, SETUP-menu .............34
DRC, SETUP-menu .............................34
Dropbox ...............................................21
E
ENTER, afstandsbediening ....................9
Externe opslag, SETUP-menu .............30
F
Functie HDMI Control .........................30
H
HDMI 1080p 24Hz, SETUP-menu ......33
HDMI Control, SETUP-menu .............30
HDMI Deep Color, SETUP-menu .......33
HDMI, SETUP-menu ...........................34
Hoek, schermmenu ...............................23
HOME, afstandsbediening .....................9
Hoofdstuk, schermmenu ......................23
I
Informatie, SETUP-menu ....................31
Ins Spelen, schermmenu .......................23
Ins Zoeken, schermmenu .....................23
Instellingen Algemeen,
SETUP-menu ...................................30
IP Setting, SETUP-menu .....................32
K
Kinderbeveiliging, SETUP-menu ........31
Kleurruimte, SETUP-menu ..................33
Kleurtoetsen, afstandsbediening ............8
L
Ladingsfout, SETUP-menu ..................30
Landcode, SETUP-menu ......................31
Last Memory, SETUP-menu ................31
Luidsprekerinstellingen,
SETUP-menu ...................................34
M
Menu, SETUP-menu ............................31
Miracast ................................................22
Mode/Afspeelmodus, schermmenu ......23
N
Netwerk Instellingen, SETUP-menu ....32
Netwerk, SETUP-menu ........................31
O
ON SCREEN, afstandsbediening ...........9
Ondertitel Style, schermmenu ..............23
Ondertitel, schermmenu .......................23
Ondertitel, SETUP-menu .....................31
OSD, SETUP-menu .............................30
Overgang, schermmenu ........................23
Overige aansluitingen ...........................17
P
PBC (Push Button Configuration) .......31
Picasa-webalbums ................................21
PIN-code (WPS) ...................................31
PIP Mark, SETUP-menu ......................31
PIP, afstandsbediening ...........................8
POP-UP/MENU, afstandsbediening ......9
Post Process, SETUP menu ..................34
PROGRAM, afstandsbediening .............8
Programma afspelen .............................25
Proxy instellen, SETUP-menu .............32
R
REPEAT, afstandsbediening ..................8
RETURN, afstandsbediening .................9
Ruisonderdrukking, SETUP-menu ......33
S
SACD Output, SETUP-menu .............. 34
Schermmenu ........................................ 23
Schijf Automatisch afspelen,
SETUP-menu .................................. 31
SEARCH, afstandsbediening ................ 9
Secundaire Audio Mark,
SETUP-menu .................................. 31
SETUP, afstandsbediening .................... 9
SETUP-menu ....................................... 27
SHUFFLE, afstandsbediening ............... 8
Slide Show, schermmenu .................... 23
Snelinstelling, SETUP-menu ............... 30
Software upgraden ............................... 37
Software-upgrade ................................ 37
Spoor/Bestand, schermmenu ............... 23
STATUS, afstandsbediening ................. 9
Statusmenu .......................................... 24
SUBTITLE, afstandsbediening ............. 9
Systeem, SETUP-menu ....................... 30
System Information, SETUP-menu ..... 34
T
Taal, SETUP-menu .............................. 30
Tijd, schermmenu ................................ 23
Titel, schermmenu ............................... 23
TOP MENU, afstandsbediening ............ 9
TV Scherm, SETUP-menu .................. 32
TV, SETUP-menu ............................... 32
TV-systeem, SETUP-menu ................. 33
Tweede Audio, schermmenu ............... 23
Tweede Video, schermmenu ............... 23
U
Upgrade-aankondiging ........................ 30
UpMix, SETUP-menu ......................... 34
V
Veiligheid, SETUP-menu .................... 31
Verbindingsinstelling,
SETUP-menu .................................. 31
Verbindingstest, SETUP-menu ........... 32
Video Process, SETUP-menu .............. 33
Video-uitgangsformaten ...................... 36
W
Wachtwoord wijzigen,
SETUP-menu .................................. 31
Werking van het SETUP-menu ........... 29
WPS (Wi-Fi Protected Setup) ............. 31
Y
YouTube .............................................. 21
Z
Zoekfunctie .......................................... 25
ZOOM, afstandsbediening .................... 8
Index
i
Information about third party software licenses
This product incorporates the following third party software.
For information (copyright, etc) about each software, please read the terms and conditions stated below. By using this product, you will be deemed to have accepted the terms and
conditions.
About Linux kernel, D-Bus, cpio, samba, SquashFS,
iputils, udhcpc, net-tools, iproute2, dibbler,
sysvinit, module-init-tools, util-linux-ng, psmisc,
coreutils, gawk, grep, findutils, bash, tar, sed, gzip,
inetunitls, gdb (gdbserver), mtd-util, Wireless
Tools, Fusion, msdl, e2fsprogs, gconv, oprofile,
ntfsprogs, which, libnl
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright © 1989, 1991 Free Software Foundation, Inc.
51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of this license document,
but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and
change it. By contrast, the GNU General Public License is intended to guarantee your
freedom to share and change free software--to make sure the software is free for all its
users. This General Public License applies to most of the Free Software Foundation’s
software and to any other program whose authors commit to using it. (Some other Free
Software Foundation software is covered by the GNU Library General Public License
instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General
Public Licenses are designed to make sure that you have the freedom to distribute
copies of free software (and charge for this service if you wish), that you receive source
code or can get it if you want it, that you can change the software or use pieces of it in
new free programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you
these rights or to ask you to surrender the rights. These restrictions translate to certain
responsibilities for you if you distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you
must give the recipients all the rights that you have. You must make sure that they, too,
receive or can get the source code. And you must show them these terms so they know
their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this
license which gives you legal permission to copy, distribute and/or modify the software.
Also, for each author’s protection and ours, we want to make certain that everyone
understands that there is no warranty for this free software. If the software is modified
by someone else and passed on, we want its recipients to know that what they have is
not the original, so that any problems introduced by others will not reflect on the
original authors’ reputations.
Finally, any free program is threatened constantly by software patents. We wish to
avoid the danger that redistributors of a free program will individually obtain patent
licenses, in effect making the program proprietary. To prevent this, we have made it
clear that any patent must be licensed for everyone’s free use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND
MODIFICATION
0. This License applies to any program or other work which contains a notice placed
by the copyright holder saying it may be distributed under the terms of this General
Public License. The “Program”, below, refers to any such program or work, and a
“work based on the Program” means either the Program or any derivative work
under copyright law: that is to say, a work containing the Program or a portion of it,
either verbatim or with modifications and/or translated into another language.
(Hereinafter, translation is included without limitation in the term “modification”.)
Each licensee is addressed as “you”.
Activities other than copying, distribution and modification are not covered by this
License; they are outside its scope. The act of running the Program is not restricted,
and the output from the Program is covered only if its contents constitute a work
based on the Program (independent of having been made by running the Program).
Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program’s source code as you
receive it, in any medium, provided that you conspicuously and appropriately
publish on each copy an appropriate copyright notice and disclaimer of warranty;
keep intact all the notices that refer to this License and to the absence of any
warranty; and give any other recipients of the Program a copy of this License along
with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at
your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus
forming a work based on the Program, and copy and distribute such modifications
or work under the terms of Section 1 above, provided that you also meet all of these
conditions:
a) You must cause the modified files to carry prominent notices stating that you
changed the files and the date of any change.
b) You must cause any work that you distribute or publish, that in whole or in part
contains or is derived from the Program or any part thereof, to be licensed as a
whole at no charge to all third parties under the terms of this License.
c) If the modified program normally reads commands interactively when run, you
must cause it, when started running for such interactive use in the most
ordinary way, to print or display an announcement including an appropriate
copyright notice and a notice that there is no warranty (or else, saying that you
provide a warranty) and that users may redistribute the program under these
conditions, and telling the user how to view a copy of this License. (Exception:
if the Program itself is interactive but does not normally print such an
announcement, your work based on the Program is not required to print an
announcement.)
These requirements apply to the modified work as a whole. If identifiable sections of
that work are not derived from the Program, and can be reasonably considered
independent and separate works in themselves, then this License, and its terms, do not
apply to those sections when you distribute them as separate works. But when you
distribute the same sections as part of a whole which is a work based on the Program,
the distribution of the whole must be on the terms of this License, whose permissions
for other licensees extend to the entire whole, and thus to each and every part regardless
of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work
written entirely by you; rather, the intent is to exercise the right to control the
distribution of derivative or collective works based on the Program.
In addition, mere aggregation of another work not based on the Program with the
Program (or with a work based on the Program) on a volume of a storage or distribution
medium does not bring the other work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it, under Section 2)
in object code or executable form under the terms of Sections 1 and 2 above
provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source code,
which must be distributed under the terms of Sections 1 and 2 above on a
medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any
third party, for a charge no more than your cost of physically performing source
distribution, a complete machine-readable copy of the corresponding source
code, to be distributed under the terms of Sections 1 and 2 above on a medium
customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer to distribute
corresponding source code. (This alternative is allowed only for
noncommercial distribution and only if you received the program in object
code or executable form with such an offer, in accord with Subsection b
above.)
The source code for a work means the preferred form of the work for making
modifications to it. For an executable work, complete source code means all the source
code for all modules it contains, plus any associated interface definition files, plus the
scripts used to control compilation and installation of the executable. However, as a
special exception, the source code distributed need not include anything that is
normally distributed (in either source or binary form) with the major components
(compiler, kernel, and so on) of the operating system on which the executable runs,
unless that component itself accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a
designated place, then offering equivalent access to copy the source code from the same
place counts as distribution of the source code, even though third parties are not
compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program except as
expressly provided under this License. Any attempt otherwise to copy, modify,
sublicense or distribute the Program is void, and will automatically terminate your
rights under this License. However, parties who have received copies, or rights,
from you under this License will not have their licenses terminated so long as such
parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However,
nothing else grants you permission to modify or distribute the Program or its
derivative works. These actions are prohibited by law if you do not accept this
License. Therefore, by modifying or distributing the Program (or any work based
on the Program), you indicate your acceptance of this License to do so, and all its
terms and conditions for copying, distributing or modifying the Program or works
based on it.
6. Each time you redistribute the Program (or any work based on the Program), the
recipient automatically receives a license from the original licensor to copy,
distribute or modify the Program subject to these terms and conditions. You may
not impose any further restrictions on the recipients’ exercise of the rights granted
herein. You are not responsible for enforcing compliance by third parties to this
License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for
any other reason (not limited to patent issues), conditions are imposed on you
(whether by court order, agreement or otherwise) that contradict the conditions of
this License, they do not excuse you from the conditions of this License. If you
cannot distribute so as to satisfy simultaneously your obligations under this License
and any other pertinent obligations, then as a consequence you may not distribute
the Program at all. For example, if a patent license would not permit royalty-free
redistribution of the Program by all those who receive copies directly or indirectly
through you, then the only way you could satisfy both it and this License would be
to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular
circumstance, the balance of the section is intended to apply and the section as a whole
is intended to apply in other circumstances.
ii
It is not the purpose of this section to induce you to infringe any patents or other
property right claims or to contest validity of any such claims; this section has the sole
purpose of protecting the integrity of the free software distribution system, which is
implemented by public license practices. Many people have made generous
contributions to the wide range of software distributed through that system in reliance
on consistent application of that system; it is up to the author/donor to decide if he or
she is willing to distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence
of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either
by patents or by copyrighted interfaces, the original copyright holder who places
the Program under this License may add an explicit geographical distribution
limitation excluding those countries, so that distribution is permitted only in or
among countries not thus excluded. In such case, this License incorporates the
limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the
General Public License from time to time. Such new versions will be similar in
spirit to the present version, but may differ in detail to address new problems or
concerns.
Each version is given a distinguishing version number. If the Program specifies a
version number of this License which applies to it and “any later version”, you have the
option of following the terms and conditions either of that version or of any later
version published by the Free Software Foundation. If the Program does not specify a
version number of this License, you may choose any version ever published by the Free
Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose
distribution conditions are different, write to the author to ask for permission. For
software which is copyrighted by the Free Software Foundation, write to the Free
Software Foundation; we sometimes make exceptions for this. Our decision will be
guided by the two goals of preserving the free status of all derivatives of our free
software and of promoting the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO
WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING
THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE
PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND
PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL
NECESSARY SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED
TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER
PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS
PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING
ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA
BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR
THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH
ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest possible use to the
public, the best way to achieve this is to make it free software which everyone can
redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest to attach them to the
start of each source file to most effectively convey the exclusion of warranty; and each
file should have at least the “copyright” line and a pointer to where the full notice is
found.
<one line to give the program’s name and a brief idea of what it does.>
Copyright © <year> <name of author>
This program is free software; you can redistribute it and/or modify it under the
terms of the GNU General Public License as published by the Free Software
Foundation; either version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
License for more details.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc., 51 Franklin St,
Fifth Floor, Boston, MA 02110-1301 USA
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this
when it starts in an interactive mode:
Gnomovision version 69, Copyright © year name of author Gnomovi
sion comes
with ABSOLUTELY NO WARRANTY; for details type ‘show w’. This is free
software, and you are welcome to redistribute it under certain conditions; type
‘show c’ for details.
The hypothetical commands ‘show w’ and ‘show c’ should show the appropriate parts
of the General Public License. Of course, the commands you use may be called
something other than ‘show w’ and ‘show c’; they could even be mouse-clicks or menu
items--whatever suits your program.
You should also get your employer (if you work as a programmer) or your school, if
any, to sign a “copyright disclaimer” for the program, if necessary. Here is a sample;
alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program
‘Gnomovision’ (which makes passes at compilers) written by James Hacker.
<signature of Ty Coon>, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your program into
proprietary programs. If your program is a subroutine library, you may consider it more
useful to permit linking proprietary applications with the library. If this is what you
want to do, use the GNU Library General
Public License instead of this License..
About gcc libgcc, gcc libstdc++
GNU GENERAL PUBLIC LICENSE
Version 3, 29 June 2007
Copyright © 2007 Free Software Foundation, Inc. <http://fsf.org/>
Everyone is permitted to copy and distribute verbatim copies of this license document,
but changing it is not allowed.
Preamble
The GNU General Public License is a free, copyleft license for software and other
kinds of works.
The licenses for most software and other practical works are designed to take away
your freedom to share and change the works. By contrast, the GNU General Public
License is intended to guarantee your freedom to share and change all versions of a
program--to make sure it remains free software for all its users. We, the Free Software
Foundation, use the GNU General Public License for most of our software; it applies
also to any other work released this way by its authors. You can apply it to your
programs, too.
When we speak of free software, we are referring to freedom, not price. Our General
Public Licenses are designed to make sure that you have the freedom to distribute
copies of free software (and charge for them if you wish), that you receive source code
or can get it if you want it, that you can change the software or use pieces of it in new
free programs, and that you know you can do these things.
To protect your rights, we need to prevent others from denying you these rights or
asking you to surrender the rights. Therefore, you have certain responsibilities if you
distribute copies of the software, or if you modify it: responsibilities to respect the
freedom of others.
For example, if you distribute copies of such a program, whether gratis or for a fee,
you must pass on to the recipients the same freedoms that you received. You must
make sure that they, too, receive or can get the source code. And you must show them
these terms so they know their rights.
Developers that use the GNU GPL protect your rights with two steps:
(1) assert copyright on the software, and (2) offer you this License giving you legal
permission to copy, distribute and/or modify it.
For the developers’ and authors’ protection, the GPL clearly explains that there is no
warranty for this free software. For both users’ and authors’ sake, the GPL requires that
modified versions be marked as changed, so that their problems will not be attributed
erroneously to authors of previous versions.
Some devices are designed to deny users access to install or run modified versions of
the software inside them, although the manufacturer can do so. This is fundamentally
incompatible with the aim of protecting users’ freedom to change the software. The
systematic pattern of such abuse occurs in the area of products for individuals to use,
which is precisely where it is most unacceptable. Therefore, we have designed this
version of the GPL to prohibit the practice for those products. If such problems arise
substantially in other domains, we stand ready to extend this provision to those domains
in future versions of the GPL, as needed to protect the freedom of users.
Finally, every program is threatened constantly by software patents. States should not
allow patents to restrict development and use of software on general-purpose
computers, but in those that do, we wish to avoid the special danger that patents applied
to a free program could make it effectively proprietary. To prevent this, the GPL
assures that patents cannot be used to render the program non-free.
The precise terms and conditions for copying, distribution and modification follow.
TERMS AND CONDITIONS
0. Definitions.
“This License” refers to version 3 of the GNU General Public License.
“Copyright” also means copyright-like laws that apply to other kinds of works, such as
semiconductor masks.
“The Program” refers to any copyrightable work licensed under this License. Each
licensee is addressed as “you”. “Licensees” and “recipients” may be individuals or
organizations.
To “modify” a work means to copy from or adapt all or part of the work in a fashion
requiring copyright permission, other than the making of an exact copy. The resulting
work is called a “modified version” of the earlier work or a work “based on” the earlier
work.
A “covered work” means either the unmodified Program or a work based on the
Program.
To “propagate” a work means to do anything with it that, without permission, would
make you directly or secondarily liable for infringement under applicable copyright
law, except executing it on a computer or modifying a private copy. Propagation
includes copying, distribution (with or without modification), making available to the
public, and in some countries other activities as well.
iii
To “convey” a work means any kind of propagation that enables other parties to make
or receive copies. Mere interaction with a user through a computer network, with no
transfer of a copy, is not conveying.
An interactive user interface displays “Appropriate Legal Notices” to the extent that it
includes a convenient and prominently visible feature that (1) displays an appropriate
copyright notice, and (2) tells the user that there is no warranty for the work (except to
the extent that warranties are provided), that licensees may convey the work under this
License, and how to view a copy of this License. If the interface presents a list of user
commands or options, such as a menu, a prominent item in the list meets this criterion.
1. Source Code.
The “source code” for a work means the preferred form of the work for making
modifications to it. “Object code” means any non-source form of a work.
A “Standard Interface” means an interface that either is an official standard defined by
a recognized standards body, or, in the case of interfaces specified for a particular
programming language, one that is widely used among developers working in that
language.
The “System Libraries” of an executable work include anything, other than the work
as a whole, that (a) is included in the normal form of packaging a Major Component,
but which is not part of that Major Component, and (b) serves only to enable use of the
work with that Major Component, or to implement a Standard Interface for which an
implementation is available to the public in source code form. A “Major Component”,
in this context, means a major essential component (kernel, window system, and so on)
of the specific operating system (if any) on which the executable work runs, or a
compiler used to produce the work, or an object code interpreter used to run it.
The “Corresponding Source” for a work in object code form means all the source code
needed to generate, install, and (for an executable work) run the object code and to
modify the work, including scripts to control those activities. However, it does not
include the work’s System Libraries, or general-purpose tools or generally available
free programs which are used unmodified in performing those activities but which are
not part of the work. For example, Corresponding Source includes interface definition
files associated with source files for the work, and the source code for shared libraries
and dynamically linked subprograms that the work is specifically designed to require,
such as by intimate data communication or control flow between those subprograms
and other parts of the work.
The Corresponding Source need not include anything that users can regenerate
automatically from other parts of the Corresponding Source.
The Corresponding Source for a work in source code form is that same work.
2. Basic Permissions.
All rights granted under this License are granted for the term of copyright on the
Program, and are irrevocable provided the stated conditions are met. This License
explicitly affirms your unlimited permission to run the unmodified Program. The
output from running a covered work is covered by this License only if the output, given
its content, constitutes a covered work. This License acknowledges your rights of fair
use or other equivalent, as provided by copyright law.
You may make, run and propagate covered works that you do not convey, without
conditions so long as your license otherwise remains in force. You may convey covered
works to others for the sole purpose of having them make modifications exclusively for
you, or provide you with facilities for running those works, provided that you comply
with the terms of this License in conveying all material for which you do not control
copyright. Those thus making or running the covered works for you must do so
exclusively on your behalf, under your direction and control, on terms that prohibit
them from making any copies of your copyrighted material outside their relationship
with you.
Conveying under any other circumstances is permitted solely under the conditions
stated below. Sublicensing is not allowed; section 10 makes it unnecessary.
3. Protecting Users’ Legal Rights From Anti-Circumvention Law.
No covered work shall be deemed part of an effective technological measure under
any applicable law fulfilling obligations under article 11 of the WIPO copyright treaty
adopted on 20 December 1996, or similar laws prohibiting or restricting circumvention
of such measures.
When you convey a covered work, you waive any legal power to forbid circumvention
of technological measures to the extent such circumvention is effected by exercising
rights under this License with respect to the covered work, and you disclaim any
intention to limit operation or modification of the work as a means of enforcing, against
the work’s users, your or third parties’ legal rights to forbid circumvention of
technological measures.
4. Conveying Verbatim Copies.
You may convey verbatim copies of the Program’s source code as you receive it, in
any medium, provided that you conspicuously and appropriately publish on each copy
an appropriate copyright notice; keep intact all notic
es stating that this License and any
non-permissive terms added in accord with section 7 apply to the code; keep intact all
notices of the absence of any warranty; and give all recipients a copy of this License
along with the Program.
You may charge any price or no price for each copy that you convey, and you may
offer support or warranty protection for a fee.
5. Conveying Modified Source Versions.
You may convey a work based on the Program, or the modifications to produce it from
the Program, in the form of source code under the terms of section 4, provided that you
also meet all of these conditions:
a) The work must carry prominent notices stating that you modified it, and giving a
relevant date.
b) The work must carry prominent notices stating that it is released under this License
and any conditions added under section
7. This requirement modifies the requirement in section 4 to “keep intact all notices”.
c) You must license the entire work, as a whole, under this License to anyone who
comes into possession of a copy. This License will therefore apply, along with any
applicable section 7 additional terms, to the whole of the work, and all its parts,
regardless of how they are packaged. This License gives no permission to license the
work in any other way, but it does not invalidate such permission if you have separately
received it.
d) If the work has interactive user interfaces, each must display Appropriate Legal
Notices; however, if the Program has interactive interfaces that do not display
Appropriate Legal Notices, your work need not make them do so.
A compilation of a covered work with other separate and independent works, which
are not by their nature extensions of the covered work, and which are not combined
with it such as to form a larger program, in or on a volume of a storage or distribution
medium, is called an “aggregate” if the compilation and its resulting copyright are not
used to limit the access or legal rights of the compilation’s users beyond what the
individual works permit. Inclusion of a covered work in an aggregate does not cause
this License to apply to the other parts of the aggregate.
6. Conveying Non-Source Forms.
You may convey a covered work in object code form under the terms of sections 4 and
5, provided that you also convey the machine-readable Corresponding Source under the
terms of this License, in one of these ways:
a) Convey the object code in, or embodied in, a physical product (including a
physical distribution medium), accompanied by the Corresponding Source fixed on a
durable physical medium customarily used for software interchange.
b) Convey the object code in, or embodied in, a physical product (including a
physical distribution medium), accompanied by a written offer, valid for at least three
years and valid for as long as you offer spare parts or customer support for that product
model, to give anyone who possesses the object code either (1) a copy of the
Corresponding Source for all the software in the product that is covered by this License,
on a durable physical medium customarily used for software interchange, for a price no
more than your reasonable cost of physically performing this conveying of source, or
(2) access to copy the Corresponding Source from a network server at no charge.
c) Convey individual copies of the object code with a copy of the written offer to
provide the Corresponding Source. This alternative is allowed only occasionally and
noncommercially, and only if you received the object code with such an offer, in accord
with subsection 6b.
d) Convey the object code by offering access from a designated place (gratis or for a
charge), and offer equivalent access to the Corresponding Source in the same way
through the same place at no further charge. You need not require recipients to copy
the Corresponding Source along with the object code. If the place to copy the object
code is a network server, the Corresponding Source may be on a different server
(operated by you or a third party) that supports equivalent copying facilities, provided
you maintain clear directions next to the object code saying where to find the
Corresponding Source. Regardless of what server hosts the Corresponding Source, you
remain obligated to ensure that it is available for as long as needed to satisfy these
requirements.
e) Convey the object code using peer-to-peer transmission, provided you inform
other peers where the object code and Corresponding Source of the work are being
offered to the general public at no charge under subsection 6d.
A separable portion of the object code, whose source code is excluded from the
Corresponding Source as a System Library, need not be included in conveying the
object code work.
A “User Product” is either (1) a “consumer product”, which means any tangible
personal property which is normally used for personal, family, or household purposes,
or (2) anything designed or sold for incorporation into a dwelling. In determining
whether a product is a consumer product, doubtful cases shall be resolved in favor of
coverage. For a particular product received by a particular user, “normally used” refers
to a typical or common use of that class of product, regardless of the status of the
particular user or of the way in which the part
icular user actually uses, or expects or is
expected to use, the product. A product is a consumer product regardless of whether the
product has substantial commercial, industrial or non-consumer uses, unless such uses
represent the only significant mode of use of the product.
“Installation Information” for a User Product means any methods, procedures,
authorization keys, or other information required to install and execute modified
versions of a covered work in that User Product from a modified version of its
Corresponding Source. The information must suffice to ensure that the continued
functioning of the modified object code is in no case prevented or interfered with solely
because modification has been made.
If you convey an object code work under this section in, or with, or specifically for use
in, a User Product, and the conveying occurs as part of a transaction in which the right
of possession and use of the User Product is transferred to the recipient in perpetuity or
for a fixed term (regardless of how the transaction is characterized), the Corresponding
Source conveyed under this section must be accompanied by the Installation
Information. But this requirement does not apply if neither you nor any third party
retains the ability to install modified object code on the User Product (for example, the
work has been installed in ROM).
The requirement to provide Installation Information does not include a requirement to
continue to provide support service, warranty, or updates for a work that has been
modified or installed by the recipient, or for the User Product in which it has been
modified or installed. Access to a network may be denied when the modification itself
materially and adversely affects the operation of the network or violates the rules and
protocols for communication across the network.
Corresponding Source conveyed, and Installation Information provided, in accord
with this section must be in a format that is publicly documented (and with an
implementation available to the public in source code form), and must require no
special password or key for unpacking, reading or copying.
7. Additional Terms.
“Additional permissions” are terms that supplement the terms of thisLicense by
making exceptions from one or more of its conditions. Additional permissions that are
applicable to the entire Program shall be treated as though they were included in this
License, to the extent that they are valid under applicable law. If additional permissions
apply only to part of the Program, that part may be used separately under those
permissions, but the entire Program remains governed by this License without regard to
the additional permissions.
When you convey a copy of a covered work, you may at your option remove any
additional permissions from that copy, or from any part of it. (Additional permissions
may be written to require their own removal in certain cases when you modify the
work.) You may place additional permissions on material, added by you to a covered
work, for which you have or can give appropriate copyright permission.
Notwithstanding any other provision of this License, for material you add to a covered
work, you may (if authorized by the copyright holders of that material) supplement the
terms of this License with terms:
a) Disclaiming warranty or limiting liability differently from the terms of sections 15
and 16 of this License; or
b) Requiring preservation of specified reasonable legal notices or author attributions
in that material or in the Appropriate Legal Notices displayed by works containing it; or
iv
c) Prohibiting misrepresentation of the origin of that material, or requiring that
modified versions of such material be marked in reasonable ways as different from the
original version; or
d) Limiting the use for publicity purposes of names of licensors or authors of the
material; or
e) Declining to grant rights under trademark law for use of some trade names,
trademarks, or service marks; or
f) Requiring indemnification of licensors and authors of that material by anyone who
conveys the material (or modified versions of it) with contractual assumptions of
liability to the recipient, for any liability that these contractual assumptions directly
impose on those licensors and authors.
All other non-permissive additional terms are considered “further restrictions” within
the meaning of section 10. If the Program as you received it, or any part of it, contains
a notice stating that it is governed by this License along with a term that is a further
restriction, you may remove that term. If a license document contains a further
restriction but permits relicensing or conveying under this License, you may add to a
covered work material governed by the terms of that license document, provided that
the further restriction does not survive such relicensing or conveying.
If you add terms to a covered work in accord with this section, you must place, in the
relevant source files, a statement of the additional terms that apply to those files, or a
notice indicating where to find the applicable terms.
Additional terms, permissive or non-permissive, may be stated in the form of a
separately written license, or stated as exceptions; the above requirements apply either
way.
8. Termination.
You may not propagate or modify a covered work except as expressly provided under
this License. Any attempt otherwise to propagate or modify it is void, and will
automatically terminate your rights under this License (including any patent licenses
granted under the third paragraph of section 11).
However, if you cease all violation of this License, then your license from a particular
copyright holder is reinstated (a) provisionally, unless and until the copyright holder
explicitly and finally terminates your license, and (b) permanently, if the copyright
holder fails to notify you of the violation by some reasonable means prior to 60 days
after the cessation.
Moreover, your license from a particular copyright holder is reinstated permanently if
the copyright holder notifies you of the violation by some reasonable means, this is the
first time you have received notice of violation of this License (for any work) from that
copyright holder, and you cure the violation prior to 30 days after your receipt of the
notice.
Termination of your rights under this section does not terminate the licenses of parties
who have received copies or rights from you under this License. If your rights have
been terminated and not permanently reinstated, you do not qualify to receive new
licenses for the same material under section 10.
9. Acceptance Not Required for Having Copies.
You are not required to accept this License in order to receive or run a copy of the
Program. Ancillary propagation of a covered work occurring solely as a consequence
of using peer-to-peer transmission to receive a copy likewise does not require
acceptance. However, nothing other than this License grants you permission to
propagate or modify any covered work. These actions infringe copyright if you do not
accept this License. Therefore, by modifying or propagating a covered work, you
indicate your acceptance of this License to do so.
10. Automatic Licensing of Downstream Recipients.
Each time you convey a covered work, the recipient automatically receives a license
from the original licensors, to run, modify and propagate that work, subject to this
License. You are not responsible for enforcing compliance by third parties with this
License.
An “entity transaction” is a transaction transferring control of an organization, or
substantially all assets of one, or subdividing an organization, or merging organizations.
If propagation of a covered work results from an entity transaction, each party to that
transaction who receives a copy of the work also receives whatever licenses to the work
the party’s predecessor in interest had or could give under the previous paragraph, plus
a right to possession of the Corresponding Source of the work from the predecessor in
interest, if the predecessor has it or can get it with reasonable efforts.
You may not impose any further restrictions on the exercise of the rights granted or
affirmed under this License. For example, you may not impose a license fee, royalty, or
other charge for exercise of rights granted under this License, and you may not initiate
litigation (including a cross-claim or counterclaim in a lawsuit) alleging that any patent
claim is infringed by making, using, selling, offering for sale, or importing the Program
or any portion of it.
11. Pa
tents.
A “contributor” is a copyright holder who authorizes use under this License of the
Program or a work on which the Program is based. The work thus licensed is called the
contributor’s “contributor version”.
A contributor’s “essential patent claims” are all patent claims owned or controlled by
the contributor, whether already acquired or hereafter acquired, that would be infringed
by some manner, permitted by this License, of making, using, or selling its contributor
version, but do not include claims that would be infringed only as a consequence of
further modification of the contributor version. For purposes of this definition,
“control” includes the right to grant patent sublicenses in a manner consistent with the
requirements of this License.
Each contributor grants you a non-exclusive, worldwide, royalty-free patent license
under the contributor’s essential patent claims, to make, use, sell, offer for sale, import
and otherwise run, modify and propagate the contents of its contributor version.
In the following three paragraphs, a “patent license” is any express agreement or
commitment, however denominated, not to enforce a patent (such as an express
permission to practice a patent or covenant not to sue for patent infringement). To
“grant” such a patent license to a party means to make such an agreement or
commitment not to enforce a patent against the party.
If you convey a covered work, knowingly relying on a patent license, and the
Corresponding Source of the work is not available for anyone to copy, free of charge
and under the terms of this License, through a publicly available network server or
other readily accessible means, then you must either (1) cause the Corresponding
Source to be so available, or (2) arrange to deprive yourself of the benefit of the patent
license for this particular work, or (3) arrange, in a manner consistent with the
requirements of this License, to extend the patent license to downstream recipients.
“Knowingly relying” means you have actual knowledge that, but for the patent license,
your conveying the covered work in a country, or your recipient’s use of the covered
work in a country, would infringe one or more identifiable patents in that country that
you have reason to believe are valid.
If, pursuant to or in connection with a single transaction or arrangement, you convey,
or propagate by procuring conveyance of, a covered work, and grant a patent license to
some of the parties receiving the covered work authorizing them to use, propagate,
modify or convey a specific copy of the covered work, then the patent license you grant
is automatically extended to all recipients of the covered work and works based on it.
A patent license is “discriminatory” if it does not include within the scope of its
coverage, prohibits the exercise of, or is conditioned on the non-exercise of one or more
of the rights that are specifically granted under this License. You may not convey a
covered work if you are a party to an arrangement with a third party that is in the
business of distributing software, under which you make payment to the third party
based on the extent of your activity of conveying the work, and under which the third
party grants, to any of the parties who would receive the covered work from you, a
discriminatory patent license (a) in connection with copies of the covered work
conveyed by you (or copies made from those copies), or (b) primarily for and in
connection with specific products or compilations that contain the covered work, unless
you entered into that arrangement, or that patent license was granted, prior to 28 March
2007.
Nothing in this License shall be construed as excluding or limiting any implied license
or other defenses to infringement that may otherwise be available to you under
applicable patent law.
12. No Surrender of Others’ Freedom.
If conditions are imposed on you (whether by court order, agreement or otherwise)
that contradict the conditions of this License, they do not excuse you from the
conditions of this License. If you cannot convey a covered work so as to satisfy
simultaneously your obligations under this License and any other pertinent obligations,
then as a consequence you may not convey it at all. For example, if you agree to terms
that obligate you to collect a royalty for further conveying from those to whom you
convey the Program, the only way you could satisfy both those terms and this License
would be to refrain entirely from conveying the Program.
13. Use with the GNU Affero General Public License.
Notwithstanding any other provision of this License, you have permission to link or
combine any covered work with a work licensed under version 3 of the GNU Affero
General Public License into a single combined work, and to convey the resulting work.
The terms of this License will continue to apply to the part which is the covered work,
but the special requirements of the GNU Affero General Public License, section 13,
concerning interaction through a network will apply to the combination as such.
14. Revised Versions of this License.
The Free Software Foundation may publish revised and/or new versions of the GNU
General Public License from time to time. Such new versions will be similar in spirit to
the present version, but may differ in detail to a
ddress new problems or concerns.
Each version is given a distinguishing version number. If the Program specifies that a
certain numbered version of the GNU General Public License “or any later version”
applies to it, you have the option of following the terms and conditions either of that
numbered version or of any later version published by the Free Software Foundation. If
the Program does not specify a version number of the GNU General Public License,
you may choose any version ever published by the Free Software Foundation.
If the Program specifies that a proxy can decide which future versions of the GNU
General Public License can be used, that proxy’s public statement of acceptance of a
version permanently authorizes you to choose that version for the Program.
Later license versions may give you additional or different permissions. However, no
additional obligations are imposed on any author or copyright holder as a result of your
choosing to follow a later version.
15. Disclaimer of Warranty.
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT
PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED
IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND
PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM
PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY
SERVICING, REPAIR OR CORRECTION.
16. Limitation of Liability.
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO
IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO
MODIFIES AND/OR CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE
LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE
OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO
LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES
SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM
TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR
OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
17. Interpretation of Sections 15 and 16.
If the disclaimer of warranty and limitation of liability provided above cannot be given
local legal effect according to their terms, reviewing courts shall apply local law that
most closely approximates an absolute waiver of all civil liability in connection with the
Program, unless a warranty or assumption of liability accompanies a copy of the
Program in return for a fee.
v
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest possible use to the
public, the best way to achieve this is to make it free software which everyone can
redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest to attach them to the
start of each source file to most effectively state the exclusion of warranty; and each file
should have at least the “copyright” line and a pointer to where the full notice is found.
<one line to give the program’s name and a brief idea of what it does.>
Copyright © <year> <name of author>
This program is free software: you can redistribute it and/or modify it under the terms
of the GNU General Public License as published by the Free Software Foundation,
either version 3 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along with this
program. If not, see <http://www.gnu.org/licenses/>.
Also add information on how to contact you by electronic and paper mail.
If the program does terminal interaction, make it output a short notice like this when it
starts in an interactive mode:
<program> Copyright © <year> <name of author>
This program comes with ABSOLUTELY NO WARRANTY; for details type ‘show
w’.
This is free software, and you are welcome to redistribute it under certain conditions;
type ‘show c’ for details.
The hypothetical commands ‘show w’ and ‘show c’ should show the appropriate parts
of the General Public License. Of course, your program’s commands might be
different; for a GUI interface, you would use an “about box”.
You should also get your employer (if you work as a programmer) or school, if any, to
sign a “copyright disclaimer” for the program, if necessary.
For more information on this, and how to apply and follow the GNU GPL, see
<http://www.gnu.org/licenses/>.
The GNU General Public License does not permit incorporating your program into
proprietary programs. If your program is a subroutine library, you may consider it more
useful to permit linking proprietary applications with the library. If this is what you
want to do, use the GNU Lesser General Public License instead of this License. But
first, please read
<http://www.gnu.org/philosophy/why-not-lgpl.html>.
GCC RUNTIME LIBRARY EXCEPTION
Version 3.1, 31 March 2009
Copyright c 2009 Free Software Foundation, Inc. <http://fsf.org/>
Everyone is permitted to copy and distribute verbatim copies of this license document,
but changing it is not allowed.
This GCC Runtime Library Exception (“Exception”) is an additional permission under
section 7 of the GNU General Public License, version 3 (“GPLv3”). It applies to a
given file (the “Runtime Library”) that bears a notice placed by the copyright holder of
the file stating that the file is governed by GPLv3 along with this Exception.
When you use GCC to compile a program, GCC may combine portions of certain GCC
header files and runtime libraries with the compiled program. The purpose of this
Exception is to allow compilation of non-GPL (including proprietary) programs to use,
in this way, the header files and runtime libraries covered by this Exception.
0. Definitions.
A file is an “Independent Module” if it either requires the Runtime Library for
execution after a Compilation Process, or makes use of an interface provided by the
Runtime Library, but is not otherwise based on the Runtime Library.
“GCC” means a version of the GNU Compiler Collection, with or without
modifications, governed by version 3 (or a specified later version) of the GNU General
Public License (GPL) with the option of using any subsequent versions published by
the FSF.
“GPL-compatible Software” is software whose conditions of propagation, modification
and use would permit combination with GCC in accord with the license of GCC.
“Target Code” refers to output from any compiler for a real or virtual target processor
architecture, in executable form or suitable for input to an assembler, loader, linker and/
or execution phase.
Notwithstanding that, Target Code does not include data in any format that is used as a
compiler intermediate representation, or used for producing a compiler intermediate
representation.
The “Compilation Process” transforms code entirely represented in non-intermediate
languages designed for human-written code, and/or in Java Virtual Machine byte code,
into Target Code. Thus, for example, use of source code generators and preprocessors
need not be considered part of the Compilation Process, since the Compilation Process
can be understood as starting with the output of the generators or preprocessors.
A Compilation Process is “Eligible” if it is done using GCC, alone or with other GPL-
compatible software, or if it is done without using any work based on GCC. For
example, using non-GPL-compatible Software to optimize any GCC intermediate
representations would not qualify as an Eligible Compilation Process.
1. Grant of Additional Permission.
You have permission to propagate a work of Target Code formed by combining the
Runtime Library with Independent Modules, even if such propagation would otherwise
violate the terms of GPLv3, provided that all Target Code was generated by Eligible
Compilation Processes.
You may then convey such a combination under terms of your choice, consistent with
the licensing of the Independent Modules.
2. No Weakening of GCC Copyleft.
The availability of this Exception does not imply any general presumption that third-
party software is unaffected by the copyleft requirements of the license of GCC.
About glibc, libmtp, libusb, libusb-compat, DirectFB,
SaWMan, Qt
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
Copyright © 1991, 1999 Free Software Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Everyone is permitted to copy and distribute verbatim copies of this license document,
but changing it is not allowed.
[This is the first released version of the Lesser GPL. It also counts as the successor of
the GNU Library Public License, version 2, hence the version number 2.1.]
Preamble
The licenses for most software are designed to take away your freedom to share and
change it. By contrast, the GNU General Public Licenses are intended to guarantee
your freedom to share and change free software--to make sure the software is free for
all its users.
This license, the Lesser General Public License, applies to some specially designated
software packages--typically libraries--of the Free Software Foundation and other
authors who decide to use it. You can use it too, but we suggest you first think carefully
about whether this license or the ordinary General Public License is the better strategy
to use in any particular case, based on the explanations below.
When we speak of free software, we are referring to freedom of use, not price. Our
General Public Licenses are designed to make sure that you have the freedom to
distribute copies of free software (and charge for this service if you wish); that you
receive source code or can get it if you want it; that you can change the software and
use pieces of it in new free programs; and that you are informed that you can do these
things.
To protect your rights, we need to make restrictions that forbid distributors to deny you
these rights or to ask you to surrender these rights. These restrictions translate to
certain responsibilities for you if you distribute copies of the library or if you modify it.
For example, if you distribute copies of the library, whether gratis or for a fee, you must
give the recipients all the rights that we gave you. You must make sure that they, too,
receive or can get the source code. If you link other code with the library, you must
provide complete object files to the recipients, so that they can relink them with the
library after making changes to the library and recompiling it. And you must show
them these terms so they know their rights.
We protect your rights with a two-step method: (1) we copyright the library, and (2) we
offer you this license, which gives you legal permission to copy, distribute and/or
modify the library.
To protect each distributor, we want to make it very clear that there is no warranty for
the free library. Also, if the library is modified by someone else and passed on, the
recipients should know that what they have is not the original version, so that the
original author’s reputation will not be affected by problems that might be introduced
by others.
Finally, software patents pose a constant threat to the existence of any free program.
We wish to make sure that a company cannot effectively restrict the users of a free
program by obtaining a restrictive license from a patent holder. Therefore, we insist
that any patent license obtained for a version of the library must be consistent with the
full freedom of use specified in this license.
Most GNU software, including some libraries, is covered by the ordinary GNU General
Public License. This license, the GNU Lesser General Public License, applies to
certain designated libraries, and is quite different from the ordinary General Public
License. We use this license for certain libraries in order to permit linking those
libraries into non-free programs.
When a program is linked with a library, whether statically or using a shared library, the
combination of the two is legally speaking a combined work, a derivative of the original
library. The ordinary General Public License therefore permits such linking only if the
entire combination fits its criteria of freedom. The Lesser General Public License
permits more lax criteria for linking other code with the library.
We call this license the “Lesser” General Public License because it does Less to protect
the user’s freedom than the ordinary General Public License. It also provides other free
software developers Less of an advantage over competing non-free programs. These
disadvantages are the reason we use the ordinary General Public License for many
libraries. However, the Lesser license provides advantages in certain special
circumstances.
For example, on rare occasions, there may be a special need to encourage the widest
possible use of a certain library, so that it becomes a de-facto standard. To achieve this,
non-free programs must be allowed to use the library. A more frequent case is that a
free library does the same job as widely used non-free libraries. In this case, there is
little to gain by limiting the free library to free software only, so we use the Lesser
General Public License.
In other cases, permission to use a particular library in non-free programs enables a
greater number of people to use a large body of free software. For example, permission
to use the GNU C Library in non-free programs enables many more people to use the
whole GNU operating system, as well as its variant, the GNU/Linux operating system.
Although the Lesser General Public License is Less protective of the users’ freedom, it
does ensure that the user of a program that is linked with the Library has the freedom
and the wherewithal to run that program using a modified version of the Library.
The precise terms and conditions for copying, distribution and modification follow.
Pay close attention to the difference between a “work based on the library” and a “work
that uses the library”. The former contains code derived from the library, whereas the
latter must be combined with the library in order to run.
vi
GNU LESSER GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND
MODIFICATION
0. This License Agreement applies to any software library or other program which
contains a notice placed by the copyright holder or other authorized party saying it
may be distributed under the terms of this Lesser General Public License (also
called “this License”). Each licensee is addressed as “you”.
A “library” means a collection of software functions and/or data prepared so as to be
conveniently linked with application programs (which use some of those functions and
data) to form executables.
The “Library”, below, refers to any such software library or work which has been
distributed under these terms. A “work based on the Library” means either the Library
or any derivative work under copyright law: that is to say, a work containing the
Library or a portion of it, either verbatim or with modifications and/or translated
straightforwardly into another language. (Hereinafter, translation is included without
limitation in the term “modification”.)
“Source code” for a work means the preferred form of the work for making
modifications to it. For a library, complete source code means all the source code for
all modules it contains, plus any associated interface definition files, plus the scripts
used to control compilation and installation of the library.
Activities other than copying, distribution and modification are not covered by this
License; they are outside its scope. The act of running a program using the Library is
not restricted, and output from such a program is covered only if its contents constitute
a work based on the Library (independent of the use of the Library in a tool for writing
it). Whether that is true depends on what the Library does and what the program that
uses the Library does.
1. You may copy and distribute verbatim copies of the Library’s complete source
code as you receive it, in any medium, provided that you conspicuously and
appropriately publish on each copy an appropriate copyright notice and disclaimer
of warranty; keep intact all the notices that refer to this License and to the absence
of any warranty; and distribute a copy of this License along with the Library.
You may charge a fee for the physical act of transferring a copy, and you may at your
option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Library or any portion of it, thus
forming a work based on the Library, and copy and distribute such modifications or
work under the terms of Section 1 above, provided that you also meet all of these
conditions:
a) The modified work must itself be a software library.
b) You must cause the files modified to carry prominent notices stating that you
changed the files and the date of any change.
c) You must cause the whole of the work to be licensed at no charge to all third
parties under the terms of this License.
d) If a facility in the modified Library refers to a function or a table of data to be
supplied by an application program that uses the facility, other than as an
argument passed when the facility is invoked, then you must make a good faith
effort to ensure that, in the event an application does not supply such function
or table, the facility still operates, and performs whatever part of its purpose
remains meaningful.
(For example, a function in a library to compute square roots has a purpose that is
entirely well-defined independent of the application. Therefore, Subsection 2d
requires that any application-supplied function or table used by this function must
be optional: if the application does not supply it, the square root function must still
compute square roots.)
These requirements apply to the modified work as a whole. If identifiable sections of
that work are not derived from the Library, and can be reasonably considered
independent and separate works in themselves, then this License, and its terms, do not
apply to those sections when you distribute them as separate works. But when you
distribute the same sections as part of a whole which is a work based on the Library, the
distribution of the whole must be on the terms of this License, whose permissions for
other licensees extend to the entire whole, and thus to each and every part regardless of
who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work
written entirely by you; rather, the intent is to exercise the right to control the
distribution of derivative or collective works based on the Library.
In addition, mere aggregation of another work not based on the Library with the Library
(or with a work based on the Library) on a volume of a storage or distribution medium
does not bring the other work under the scope of this License.
3. You may opt to apply the terms of the ordinary GNU General Public License
instead of this License to a given copy of the Library. To do this, you must alter all
the
notices that refer to this License, so that they refer to the ordinary GNU General
Public License, version 2, instead of to this License. (If a newer version than
version 2 of the ordinary GNU General Public License has appeared, then you can
specify that version instead if you wish.) Do not make any other change in these
notices.
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary
GNU General Public License applies to all subsequent copies and derivative works
made from that copy.
This option is useful when you wish to copy part of the code of the Library into a
program that is not a library.
4. You may copy and distribute the Library (or a portion or derivative of it, under
Section 2) in object code or executable form under the terms of Sections 1 and 2
above provided that you accompany it with the complete corresponding machine-
readable source code, which must be distributed under the terms of Sections 1 and 2
above on a medium customarily used for software interchange.
If distribution of object code is made by offering access to copy from a designated
place, then offering equivalent access to copy the source code from the same place
satisfies the requirement to distribute the source code, even though third parties are not
compelled to copy the source along with the object code.
5. A program that contains no derivative of any portion of the Library, but is designed
to work with the Library by being compiled or linked with it, is called a “work that
uses the Library”. Such a work, in isolation, is not a derivative work of the Library,
and therefore falls outside the scope of this License.
However, linking a “work that uses the Library” with the Library creates an executable
that is a derivative of the Library (because it contains portions of the Library), rather
than a “work that uses the library”. The executable is therefore covered by this License.
Section 6 states terms for distribution of such executables.
When a “work that uses the Library” uses material from a header file that is part of the
Library, the object code for the work may be a derivative work of the Library even
though the source code is not. Whether this is true is especially significant if the work
can be linked without the Library, or if the work is itself a library. The threshold for
this to be true is not precisely defined by law.
If such an object file uses only numerical parameters, data structure layouts and
accessors, and small macros and small inline functions (ten lines or less in length), then
the use of the object file is unrestricted, regardless of whether it is legally a derivative
work. (Executables containing this object code plus portions of the Library will still
fall under Section 6.)
Otherwise, if the work is a derivative of the Library, you may distribute the object code
for the work under the terms of Section 6. Any executables containing that work also
fall under Section 6, whether or not they are linked directly with the Library itself.
6. As an exception to the Sections above, you may also combine or link a ‘work that
uses the Library” with the Library to produce a work containing portions of the
Library, and distribute that work under terms of your choice, provided that the
terms permit modification of the work for the customer’s own use and reverse
engineering for debugging such modifications.
You must give prominent notice with each copy of the work that the Library is used in
it and that the Library and its use are covered by this License. You must supply a copy
of this License. If the work during execution displays copyright notices, you must
include the copyright notice for the Library among them, as well as a reference
directing the user to the copy of this License. Also, you must do one of these things:
a) Accompany the work with the complete corresponding machine-readable
source code for the Library including whatever changes were used in the work
(which must be distributed under Sections 1 and 2 above); and, if the work is an
executable linked with the Library, with the complete machine-readable “work
that uses the Library”, as object code and/or source code, so that the user can
modify the Library and then relink to produce a modified executable containing
the modified Library. (It is understood that the user who changes the contents
of definitions files in the Library will not necessarily be able to recompile the
application to use the modified definitions.)
b) Use a suitable shared library mechanism for linking with the Library. A
suitable mechanism is one that (1) uses at run time a copy of the library already
present on the user’s computer system, rather than copying library functions
into the executable, and (2) will operate properly with a modified version of the
library, if the user installs one, as long as the modified version is interface-
compatible with the version that the work was made with.
c) Accompany the work with a written offer, valid for at least three years, to give
the same user the materials specified in Subsection 6a, above, for a charge no
more than the cost of performing this distribution.
d) If distribution of the work is made by offering access to copy from a designated
place, offer equivalent access to copy the above specified materials from the
same place.
e) Verify that the user has already received a copy of these materials or that you
have already sent this user a copy.
For an executable, the required form of the “w
ork that uses the Library” must include
any data and utility programs needed for reproducing the executable from it. However,
as a special exception, the materials to be distributed need not include anything that is
normally distributed (in either source or binary form) with the major components
(compiler, kernel, and so on) of the operating system on which the executable runs,
unless that component itself accompanies the executable.
It may happen that this requirement contradicts the license restrictions of other
proprietary libraries that do not normally accompany the operating system. Such a
contradiction means you cannot use both them and the Library together in an executable
that you distribute.
7. You may place library facilities that are a work based on the Library side-by-side in
a single library together with other library facilities not covered by this License,
and distribute such a combined library, provided that the separate distribution of the
work based on the Library and of the other library facilities is otherwise permitted,
and provided that you do these two things:
a) Accompany the combined library with a copy of the same work based on the
Library, uncombined with any other library facilities. This must be distributed
under the terms of the Sections above.
b) Give prominent notice with the combined library of the fact that part of it is a
work based on the Library, and explaining where to find the accompanying
uncombined form of the same work.
8. You may not copy, modify, sublicense, link with, or distribute the Library except as
expressly provided under this License. Any attempt otherwise to copy, modify,
sublicense, link with, or distribute the Library is void, and will automatically
terminate your rights under this License. However, parties who have received
copies, or rights, from you under this License will not have their licenses
terminated so long as such parties remain in full compliance.
9. You are not required to accept this License, since you have not signed it. However,
nothing else grants you permission to modify or distribute the Library or its
derivative works. These actions are prohibited by law if you do not accept this
License. Therefore, by modifying or distributing the Library (or any work based on
the Library), you indicate your acceptance of this License to do so, and all its terms
and conditions for copying, distributing or modifying the Library or works based
on it.
vii
10. Each time you redistribute the Library (or any work based on the Library), the
recipient automatically receives a license from the original licensor to copy,
distribute, link with or modify the Library subject to these terms and conditions.
You may not impose any further restrictions on the recipients’ exercise of the rights
granted herein. You are not responsible for enforcing compliance by third parties
with this License.
11. If, as a consequence of a court judgment or allegation of patent infringement or for
any other reason (not limited to patent issues), conditions are imposed on you
(whether by court order, agreement or otherwise) that contradict the conditions of
this License, they do not excuse you from the conditions of this License. If you
cannot distribute so as to satisfy simultaneously your obligations under this License
and any other pertinent obligations, then as a consequence you may not distribute
the Library at all. For example, if a patent license would not permit royalty-free
redistribution of the Library by all those who receive copies directly or indirectly
through you, then the only way you could satisfy both it and this License would be
to refrain entirely from distribution of the Library.
If any portion of this section is held invalid or unenforceable under any particular
circumstance, the balance of the section is intended to apply, and the section as a whole
is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other
property right claims or to contest validity of any such claims; this section has the sole
purpose of protecting the integrity of the free software distribution system which is
implemented by public license practices. Many people have made generous
contributions to the wide range of software distributed through that system in reliance
on consistent application of that system; it is up to the author/donor to decide if he or
she is willing to distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence
of the rest of this License.
12. If the distribution and/or use of the Library is restricted in certain countries either
by patents or by copyrighted interfaces, the original copyright holder who places
the Library under this License may add an explicit geographical distribution
limitation excluding those countries, so that distribution is permitted only in or
among countries not thus excluded. In such case, this License incorporates the
limitation as if written in the body of this License.
13. The Free Software Foundation may publish revised and/or new versions of the
Lesser General Public License from time to time. Such new versions will be similar
in spirit to the present version, but may differ in detail to address new problems or
concerns.
Each version is given a distinguishing version number. If the Library specifies a
version number of this License which applies to it and “any later version”, you have the
option of following the terms and conditions either of that version or of any later
version published by the Free Software Foundation. If the Library does not specify a
license version number, you may choose any version ever published by the Free
Software Foundation.
14. If you wish to incorporate parts of the Library into other free programs whose
distribution conditions are incompatible with these, write to the author to ask for
permission. For software which is copyrighted by the Free Software Foundation,
write to the Free Software Foundation; we sometimes make exceptions for this.
Our decision will be guided by the two goals of preserving the free status of all
derivatives of our free software and of promoting the sharing and reuse of software
generally.
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY
APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING
THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE
LIBRARY “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND
PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE
LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL
NECESSARY SERVICING, REPAIR OR CORRECTION.
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED
TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER
PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS
PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING
ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA
BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR
THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH
ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Libraries
If you develop a new library, and you want it to be of the greatest possible use to the
public, we recommend making it free software that everyone can redistribute and
change. You can do so by permitting redistribution under these terms (
or, alternatively,
under the terms of the ordinary General Public License).
To apply these terms, attach the following notices to the library. It is safest to attach
them to the start of each source file to most effectively convey the exclusion of
warranty; and each file should have at least the “copyright” line and a pointer to where
the full notice is found.
<one line to give the library’s name and a brief idea of what it does.> Copyright ©
<year> <name of author>
This library is free software; you can redistribute it and/or modify it under the terms
of the GNU Lesser General Public License as published by the Free Software
Foundation; either version 2 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public
License for more details.
You should have received a copy of the GNU Lesser General Public License along
with this library; if not, write to the Free Software Foundation, Inc., 59 Temple
Place, Suite 330, Boston, MA 02111-1307 USA
Also add information on how to contact you by electronic and paper mail.
You should also get your employer (if you work as a programmer) or your school, if
any, to sign a “copyright disclaimer” for the library, if necessary. Here is a sample;
alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the library ‘Frob’ (a
library for tweaking knobs) written by James Random Hacker.
<signature of Ty Coon>, 1 April 1990 Ty Coon, President of Vice
That’s all there is to it!
About Live555, procps (ps, top), libavformat,
libavutil, libavcodec, zziplib
GNU LIBRARY GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1991 Free Software Foundation, Inc.
51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA
Everyone is permitted to copy and distribute verbatim copies of this license document,
but changing it is not allowed.
[This is the first released version of the library GPL. It is numbered 2 because it goes
with version 2 of the ordinary GPL.]
Preamble
The licenses for most software are designed to take away your freedom to share and
change it. By contrast, the GNU General Public Licenses are intended to guarantee your
freedom to share and change free software--to make sure the software is free for all its
users.
This license, the Library General Public License, applies to some specially designated
Free Software Foundation software, and to any other libraries whose authors decide to
use it. You can use it for your libraries, too.
When we speak of free software, we are referring to freedom, not price. Our General
Public Licenses are designed to make sure that you have the freedom to distribute
copies of free software (and charge for this service if you wish), that you receive source
code or can get it if you want it, that you can change the software or use pieces of it in
new free programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you
these rights or to ask you to surrender the rights. These restrictions translate to certain
responsibilities for you if you distribute copies of the library, or if you modify it.
For example, if you distribute copies of the library, whether gratis or for a fee, you must
give the recipients all the rights that we gave you. You must make sure that they, too,
receive or can get the source code. If you link a program with the library, you must
provide complete object files to the recipients so that they can relink them with the
library, after making changes to the library and recompiling it. And you must show
them these terms so they know their rights.
Our method of protecting your rights has two steps: (1) copyright the library, and (2)
offer you this license which gives you legal permission to copy, distribute and/or
modify the library.
Also, for each distributor’s protection, we want to make certain that everyone
understands that there is no warranty for this free library. If the library is modified by
someone else and passed on, we want its recipients to know that what they have is not
the original version, so that any problems introduced by others will not reflect on the
original authors’ reputations.
Finally, any free program is threatened constantly by software patents. We wish to
avoid the danger that companies distributing free software will individually obtain
patent licenses, thus in effect transforming the program into proprietary software. To
prevent this, we have made it clear that any patent must be licensed for everyone’s free
use or not licensed at all.
Most GNU software, including some libraries, is covered by the ordinary GNU General
Public License, which was designed for utility programs. This license, the GNU Library
General Public License, applies to certain designated libraries. This license is quite
different from the ordinary one; be sure to read it in full, and don’t assume that anything
in it is the same as in the ordinary license.
The reason we have a separate public license for some libraries is that they blur the
distinction we usually make between modifying or adding to a program and simply
using it. Linking a program with a library, without changing the library, is in some
sense simply using the library, and is analogous to running a utility program or
application program. However, in a textual and legal sense, the linked executable is a
combined work, a derivative of the original library, and the ordinary General Public
License treats it as such.
Because of this blurred distinction, using the ordinary General Public License for
libraries did not effectively promote software sharing, because most developers did not
use the libraries. We concluded that weaker conditions might promote sharing better.
However, unrestricted linking of non-free programs would deprive the users of those
programs of all benefit from the free status of the libraries themselves. This Library
General Public License is intended to permit developers of non-free programs to use
free libraries, while preserving your freedom as a user of such programs to change the
free libraries that are incorporated in them. (We have not seen how to achieve this as
regards changes in header files, but we have achieved it as regards changes in the actual
functions of the Library.) The hope is that this will lead to faster development of free
libraries.
viii
The precise terms and conditions for copying, distribution and modification follow. Pay
close attention to the difference between a “work based on the library” and a “work that
uses the library”. The former contains code derived from the library, while the latter
only works together with the library.
Note that it is possible for a library to be covered by the ordinary General Public
License rather than by this special one.
GNU LIBRARY GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND
MODIFICATION
0. This License Agreement applies to any software library which contains a notice
placed by the copyright holder or other authorized party saying it may be distributed
under the terms of this Library General Public License (also called “this License”).
Each licensee is addressed as “you”.
A “library” means a collection of software functions and/or data prepared so as to be
conveniently linked with application programs (which use some of those functions and
data) to form executables.
The “Library”, below, refers to any such software library or work which has been
distributed under these terms. A “work based on the Library” means either the Library
or any derivative work under copyright law: that is to say, a work containing the
Library or a portion of it, either verbatim or with modifications and/or translated
straightforwardly into another language. (Hereinafter, translation is included without
limitation in the term “modification”.)
“Source code” for a work means the preferred form of the work for making
modifications to it. For a library, complete source code means all the source code for all
modules it contains, plus any associated interface definition files, plus the scripts used
to control compilation and installation of the library.
Activities other than copying, distribution and modification are not covered by this
License; they are outside its scope. The act of running a program using the Library is
not restricted, and output from such a program is covered only if its contents constitute
a work based on the Library (independent of the use of the Library in a tool for writing
it). Whether that is true depends on what the Library does and what the program that
uses the Library does.
1. You may copy and distribute verbatim copies of the Library’s complete source code
as you receive it, in any medium, provided that you conspicuously and appropriately
publish on each copy an appropriate copyright notice and disclaimer of warranty; keep
intact all the notices that refer to this License and to the absence of any warranty; and
distribute a copy of this License along with the Library.
You may charge a fee for the physical act of transferring a copy, and you may at your
option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Library or any portion of it, thus forming
a work based on the Library, and copy and distribute such modifications or work under
the terms of Section 1 above, provided that you also meet all of these conditions:
a) The modified work must itself be a software library.
b) You must cause the files modified to carry prominent notices stating that you
changed the files and the date of any change.
c) You must cause the whole of the work to be licensed at no charge to all third parties
under the terms of this License.
d) If a facility in the modified Library refers to a function or a table of data to be
supplied by an application program that uses the facility, other than as an argument
passed when the facility is invoked, then you must make a good faith effort to ensure
that, in the event an application does not supply such function or table, the facility still
operates, and performs whatever part of its purpose remains meaningful.
(For example, a function in a library to compute square roots has a purpose that is
entirely well-defined independent of the application. Therefore, Subsection 2d requires
that any application-supplied function or table used by this function must be optional: if
the application does not supply it, the square root function must still compute square
roots.)
These requirements apply to the modified work as a whole. If identifiable sections of
that work are not derived from the Library, and can be reasonably considered
independent and separate works in themselves, then this License, and its terms, do not
apply to those sections when you distribute them as separate works. But when you
distribute the same sections as part of a whole which is a work based on the Library, the
distribution of the whole must be on the terms of this License, whose permissions for
other licensees extend to the entire whole, and thus to each and every part regardless of
who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work
written entirely by you; rather, the intent is to exercise the right to control the
distribution of derivative or collective works based on the Library.
In addition, mere aggregation of another work not based on the Library with the Library
(or with a work based on the Library) on a volume of a storage or distribution medium
does not bring the other work under the scope of this License.
3. You may opt to apply the terms of the ordinary GNU General Public License instead
of this License to a given copy of the Library. To do this, you must alter all the notices
that refer to this License, so that they refer to the ordinary GNU General Public License,
version 2, instead of to this License. (If a newer version than version 2 of the ordinary
GNU General Public License has appeared, then you can specify that version instead if
you wish.) Do not make any other change in these notices.
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary
GNU General Public License applies to all subsequent copies and derivative works
made from that copy.
This option is useful when you wish to copy part of the code of the Library into a
program that is not a library.
4. You may copy and distribute the Library (or a portion or derivative of it, under
Section 2) in object code or executable form under the terms of Sections 1 and 2 above
provided that you accompany it with the complete corresponding machine-readable
source code, which must be distributed under the terms of Sections 1 and 2 above on a
medium customarily used for software interchange.
If distribution of object code is made by offering access to copy from a designated
place, then offering equivalent access to copy the source code from the same place
satisfies the requirement to distribute the source code, even though third parties are not
compelled to copy the source along with the object code.
5. A program that contains no derivative of any portion of the Library, but is designed
to work with the Library by being compiled or linked with it, is called a “work that uses
the Library”. Such a work, in isolation, is not a derivative work of the Library, and
therefore falls outside the scope of this License.
However, linking a “work that uses the Library” with the Library creates an executable
that is a derivative of the Library (because it contains portions of the Library), rather
than a “work that uses the library”. The executable is therefore covered by this License.
Section 6 states terms for distribution of such executables.
When a “work that uses the Library” uses material from a header file that is part of the
Library, the object code for the work may be a derivative work of the Library even
though the source code is not. Whether this is true is especially significant if the work
can be linked without the Library, or if the work is itself a library. The threshold for this
to be true is not precisely defined by law.
If such an object file uses only numerical parameters, data structure layouts and
accessors, and small macros and small inline functions (ten lines or less in length), then
the use of the object file is unrestricted, regardless of whether it is legally a derivative
work. (Executables containing this object code plus portions of the Library will still fall
under Section 6.)
Otherwise, if the work is a derivative of the Library, you may distribute the object code
for the work under the terms of Section 6. Any executables containing that work also
fall under Section 6, whether or not they are linked directly with the Library itself.
6. As an exception to the Sections above, you may also compile or link a “work that
uses the Library” with the Library to produce a work containing portions of the Library,
and distribute that work under terms of your choice, provided that the terms permit
modification of the work for the customer’s own use and reverse engineering for
debugging such modifications.
You must give prominent notice with each copy of the work that the Library is used in
it and that the Library and its use are covered by this License. You must supply a copy
of this License. If the work during execution displays copyright notices, you must
include the copyright notice for the Library among them, as well as a reference
directing the user to the copy of this License. Also, you must do one of these things:
a) Accompany the work with the complete corresponding machine-readable source
code for the Library including whatever changes were used in the work (which must be
distributed under Sections 1 and 2 above); and, if the work is an executable linked with
the Library, with the complete machine-readable “work that uses the Library”, as object
code and/or source code, so that the user can modify the Library and then relink to
produce a modified executable containing the modified Library. (It is understood that
the user who changes the contents of definitions files in the Library will not necessarily
be able to recompile the application to use the modified definitions.)
b) Accompany the work with a written offer, valid for at least three years, to give the
same user the materials specified in Subsection 6a, above, for a charge no more than the
cost of performing this distribution.
c) If distribution of the work is made by offering access to copy from a designated
place, offer equivalent access to copy the above specified materials from the same place
d) Verify that the user has already received a copy of these materials or that you have
already sent this user a copy.
For an executable, the required form of the “work that uses the Library” must include
any data and utility programs needed for reproducing the executable from it. However,
as a special exception, the source code distributed need not include anything that is
normally distributed (in either source or binary form) with the major components
(compiler, kernel, and so on) of the operating system on which the executable runs,
unless that component itself accompanies the executable.
It may happen that this requirement contradicts the license restrictions of other
proprietary libraries that do not normally accompany the operating system. Such a
contradiction means you cannot use both them and the Library together in an executable
that you distribute.
7. You may place library facilities that are a work based on the Library side-by-side in a
single library together with other library facilities not covered by this License, and
distribute such a combined library, provided that the separate distribution of the work
based on the Library and of the other library facilities is otherwise permitted, and
provided that you do these two things:
a) Accompany the combined library with a copy of the same work based on the Library,
uncombined with any other library facilities. This must be distributed under the terms
of the Sections above.
b) Give prominent notice with the combined library of the fact that part of it is a work
based on the Library, and explaining where to find the accompanying uncombined form
of the same work.
8. You may not copy, modify, sublicense, link with, or distribute the Library except as
expressly provided under this License. Any attempt otherwise to copy, modify,
sublicense, link with, or distribute the Library is void, and will automatically terminate
your rights under this License. However, parties who have received copies, or rights,
from you under this License will not have their licenses terminated so long as such
parties remain in full compliance.
9. You are not required to accept this License, since you have not signed it. However,
nothing else grants you permission to modify or distribute the Library or its derivative
works. These actions are prohibited by law if you do not accept this License. Therefore,
by modifying or distributing the Library (or any work based on the Library), you
indicate your acceptance of this License to do so, and all its terms and conditions for
copying, distributing or modifying the Library or works based on it.
10. Each time you redistribute the Library (or any work based on the Library), the
recipient automatically receives a license from the original licensor to copy, distribute,
link with or modify the Library subject to these terms and conditions. You may not
impose any further restrictions on the recipients’ exercise of the rights granted herein.
You are not responsible for enforcing compliance by third parties to this License.
11. If, as a consequence of a court judgment or allegation of patent infringement or for
any other reason (not limited to patent issues), conditions are imposed on you (whether
by court order, agreement or otherwise) that contradict the conditions of this License,
they do not excuse you from the conditions of this License. If you cannot distribute so
as to satisfy simultaneously your obligations under this License and any other pertinent
obligations, then as a consequence you may not distribute the Library at all. For
example, if a patent license would not permit royalty-free redistribution of the Library
by all those who receive copies directly or indirectly through you, then the only way
you could satisfy both it and this License would be to refrain entirely from distribution
of the Library.
If any portion of this section is held invalid or unenforceable under any particular
circumstance, the balance of the section is intended to apply, and the section as a whole
is intended to apply in other circumstances.
ix
It is not the purpose of this section to induce you to infringe any patents or other
property right claims or to contest validity of any such claims; this section has the sole
purpose of protecting the integrity of the free software distribution system which is
implemented by public license practices. Many people have made generous
contributions to the wide range of software distributed through that system in reliance
on consistent application of that system; it is up to the author/donor to decide if he or
she is willing to distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence
of the rest of this License.
12. If the distribution and/or use of the Library is restricted in certain countries either by
patents or by copyrighted interfaces, the original copyright holder who places the
Library under this License may add an explicit geographical distribution limitation
excluding those countries, so that distribution is permitted only in or among countries
not thus excluded. In such case, this License incorporates the limitation as if written in
the body of this License.
13. The Free Software Foundation may publish revised and/or new versions of the
Library General Public License from time to time. Such new versions will be similar in
spirit to the present version, but may differ in detail to address new problems or
concerns.
Each version is given a distinguishing version number. If the Library specifies a version
number of this License which applies to it and “any later version”, you have the option
of following the terms and conditions either of that version or of any later version
published by the Free Software Foundation. If the Library does not specify a license
version number, you may choose any version ever published by the Free Software
Foundation.
14. If you wish to incorporate parts of the Library into other free programs whose
distribution conditions are incompatible with these, write to the author to ask for
permission. For software which is copyrighted by the Free Software Foundation, write
to the Free Software Foundation; we sometimes make exceptions for this. Our decision
will be guided by the two goals of preserving the free status of all derivatives of our free
software and of promoting the sharing and reuse of software generally.
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY
APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE
COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY
“AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE
ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY
IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO
IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO
MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED
ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF
THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT
LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR
LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE
LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH
HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Libraries
If you develop a new library, and you want it to be of the greatest possible use to the
public, we recommend making it free software that everyone can redistribute and
change. You can do so by permitting redistribution under these terms (or, alternatively,
under the terms of the ordinary General Public License).
To apply these terms, attach the following notices to the library. It is safest to attach
them to the start of each source file to most effectively convey the exclusion of
warranty; and each file should have at least the “copyright” line and a pointer to where
the full notice is found.
<one line to give the library’s name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This library is free software; you can redistribute it and/or modify it under the terms of
the GNU Library General Public License as published by the Free Software
Foundation; either version 2 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public
License for more details.
You should have received a copy of the GNU Library General Public License along
with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin St,
Fifth Floor, Boston, MA 02110-1301, USA.
Also add information on how to contact you by electronic and paper mail.
You should also get your employer (if you work as a programmer) or your school, if
any, to sign a “copyright disclaimer” for the library, if necessary. Here is a sample; alter
the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the library ‘Frob’ (a library
for tweaking knobs) written by James Random Hacker.
<signature of Ty Coon>, 1 April 1990
Ty Coon, President of Vice
That’s all there is to it!
About bison_parser
Conditions for Using Bison
The distribution terms for Bison-generated parsers permit using the parsers in nonfree
programs. Before Bison version 2.2, these extra permissions applied only when Bison
was generating LALR(1) parsers in C. And before Bison version 1.24, Bison-generated
parsers could be used only in programs that were free software.
The other GNU programming tools, such as the GNU C compiler, have never had such
a requirement. They could always be used for nonfree software. The reason Bison was
different was not due to a special policy decision; it resulted from applying the usual
General Public License to all of the Bison source code.
The main output of the Bison utility?the Bison parser implementation file?contains a
verbatim copy of a sizable piece of Bison, which is the code for the parser’s
implementation. (The actions from your grammar are inserted into this implementation
at one point, but most of the rest of the implementation is not changed.) When we
applied the GPL terms to the skeleton code for the parser’s implementation, the effect
was to restrict the use of Bison output to free software.
We didn’t change the terms because of sympathy for people who want to make software
proprietary. Software should be free. But we concluded that limiting Bison’s use to free
software was doing little to encourage people to make other software free. So we
decided to make the practical conditions for using Bison match the practical conditions
for using the other GNU tools.
This exception applies when Bison is generating code for a parser. You can tell whether
the exception applies to a Bison output file by inspecting the file for text beginning with
“As a special exception...”. The text spells out the exact terms of the exception.
About cURL, libcurl
COPYRIGHT AND PERMISSION NOTICE
Copyright © 1996 - 2009, Daniel Stenberg, <daniel@haxx.se>.
All rights reserved.
Permission to use, copy, modify, and distribute this software for any purpose with or
without fee is hereby granted, provided that the above copyright notice and this
permission notice appear in all copies.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY
KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO
EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR
ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.
Except as contained in this notice, the name of a copyright holder shall not be used in
advertising or otherwise to promote the sale, use or other dealings in this Software
without prior written authorization of the copyright holder.
About c-ares
Copyright 1998 by the Massachusetts Institute of Technology.
Permission to use, copy, modify, and distribute this software and its documentation for
any purpose and without fee is hereby granted, provided that the above copyright notice
appear in all copies and that both that copyright notice and this permission notice
appear in supporting documentation, and that the name of M.I.T. not be used in
advertising or publicity pertaining to distribution of the software without specific,
written prior permission.
M.I.T. makes no representations about the suitability of this software for any purpose. It
is provided “as is” without express or implied warranty.
About Expat
Copyright © 1998, 1999, 2000 Thai Open Source Software Center Ltd
and Clark Cooper
Copyright © 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.
Permission is hereby granted, free of charge, to any person obtaining a copy of this
software and associated documentation files (the “Software”), to deal in the Software
without restriction, including without limitation the rights to use, copy, modify, merge,
publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons
to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or
substantial portions of the Software.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY
KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS
OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
About libxml2
Except where otherwise noted in the source code (e.g. the files hash.c, list.c and the trio
files, which are covered by a similar licence but with different Copyright notices) all the
files are:
Copyright © 1998-2003 Daniel Veillard. All Rights Reserved.
Permission is hereby granted, free of charge, to any person obtaining a copy of this
software and associated documentation files (the “Software”), to deal in the Software
without restriction, including without limitation the rights to use, copy, modify, merge,
publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons
to whom the Software is furnished to do so, subject to the following conditions:
x
The above copyright notice and this permission notice shall be included in all copies or
substantial portions of the Software.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY
KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE DANIEL
VEILLARD BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of Daniel Veillard shall not be used in
advertising or otherwise to promote the sale, use or other dealings in this Software
without prior written authorization from him.
About NTP
Copyright © University of Delaware 1992-2012
Permission to use, copy, modify, and distribute this software andits documentation for
any purpose with or without fee is hereby granted, provided that the above copyright
notice appears in all copies and that both the copyright notice and this permission notice
appear in supporting documentation, and that the name University of Delaware not be
used in advertising or publicity pertaining to distribution of the software without
specific, written prior permission. The University of Delaware makes no
representations about the suitability this software for any purpose. It is provided “as is”
without express or implied warranty.
About tcpdump
License: BSD
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list
of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
3. The names of the authors may not be used to endorse or promote products derived
from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED “AS IS” AND WITHOUT ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE.
About tinyxml
www.sourceforge.net/projects/tinyxml
Original code (2.0 and earlier )copyright © 2000-2006 Lee Thomason
(www.grinninglizard.com)
This software is provided ‘as-is’, without any express or implied warranty. In no event
will the authors be held liable for any damages arising from the use of this software.
Permission is granted to anyone to use this software for any purpose, including
commercial applications, and to alter it and redistribute it freely, subject to the
following restrictions:
1. The origin of this software must not be misrepresented; you must not claim that you
wrote the original software. If you use this software in a product, an
acknowledgment in the product documentation would be appreciated but is not
required.
2. Altered source versions must be plainly marked as such, and must not be
misrepresented as being the original software.
3. This notice may not be removed or altered from any source distribution.
About dmalloc
This is a version (aka dlmalloc) of malloc/free/realloc written by Doug Lea and released
to the public domain, as explained at http://creativecommons.org/licenses/
publicdomain. Send questions,comments, complaints, performance data, etc to
dl@cs.oswego.edu.
THIS SOFTWARE IS PROVIDED BY THE CRYPTIX FOUNDATION LIMITED
AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED.IN NO EVENT SHALL THE CRYPTIX
FOUNDATION LIMITED OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
About DMG’s dtoa and strtod
The author of this software is David M. Gay.
Copyright © 1991, 2000, 2001 by Lucent Technologies.
Permission to use, copy, modify, and distribute this software for any purpose without
fee is hereby granted, provided that this entire notice is included in all copies of any
software which is or includes a copy or modification of this software and in all copies
of the supporting documentation for such software.
THIS SOFTWARE IS BEING PROVIDED “AS IS”, WITHOUT ANY EXPRESS OR
IMPLIED WARRANTY. IN PARTICULAR, NEITHER THE AUTHOR NOR
LUCENT MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND
CONCERNING THE MERCHANTABILITY OF THIS SOFTWARE OR ITS
FITNESS FOR ANY PARTICULAR PURPOSE.
About EMX_sprintf_sscanf
The emx libraries are not distributed under the GPL. Linking an application with the
emx libraries does not cause the executable to be covered by the GNU General Public
License. You are allowed to change and copy the emx library sources if you keep the
copyright message intact. If you improve the emx libraries, please send your
enhancements to the emx author (you should copyright your enhancements similar to
the existing emx libraries).
About Lua
The MIT License (MIT)
Copyright ©1994-2013 Lua.org, PUC-Rio.
Permission is hereby granted, free of charge, to any person obtaining a copy of this
software and associated documentation files (the “Software”), to deal in the Software
without restriction, including without limitation the rights to use, copy, modify, merge,
publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons
to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or
substantial portions of the Software.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY
KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS
OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
About ncurses
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY
KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS
OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Copyright © 1998-2000,2006 Free Software Foundation, Inc.
Permission is hereby granted, free of charge, to any person obtaining acopy of this
software and associated documentation files (the”Software”), to deal in the Software
without restriction, including without limitation the rights to use, copy, modify, merge,
publish,-- distribute, distribute with modifications, sublicense, and/or sell copies of the
Software, and to permit persons to whom the Software is furnished to do so, subject to
the following conditions:
The above copyright notice and this permission notice shall be included in all copies or
substantial portions of the Software.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY
KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE ABOVE
COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name(s) of the above copyright holders shall not
be used in advertising or otherwise to promote the sale, use or other dealings in this
Software without prior written authorization.
About popt
Copyright © 1998 Red Hat Software
Permission is hereby granted, free of charge, to any person obtaining a copy of this
software and associated documentation files (the “Software”), to deal in the Software
without restriction, including without limitation the rights to use, copy, modify, merge,
publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons
to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or
substantial portions of the Software.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY
KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE X
CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of the X Consortium shall not be used in
advertising or otherwise to promote the sale, use or other dealings in this Software
without prior written authorization from the X Consortium.
xi
About protobuf
Copyright © 2008, Google Inc. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list
of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
3. Neither the name of Google Inc. nor the names of its contributors may be used to
endorse or promote products derived from this software without specific prior
written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Code generated by the Protocol Buffer compiler is owned by the owner of the input file
used when generating it. This code is not standalone and requires a support library to
be linked with it. This support library is itself covered by the above license.
About UnZip
Copyright © 1990-2009 Info-ZIP. All rights reserved.
For the purposes of this copyright and license, “Info-ZIP” is defined as the following
set of individuals:
Mark Adler, John Bush, Karl Davis, Harald Denker, Jean-Michel Dubois, Jean-loup
Gailly, Hunter Goatley, Ed Gordon, Ian Gorman, Chris Herborth, Dirk Haase, Greg
Hartwig, Robert Heath, Jonathan Hudson, Paul Kienitz, David Kirschbaum, Johnny
Lee, Onno van der Linden, Igor Mandrichenko, Steve P. Miller, Sergio Monesi, Keith
Owens, George Petrov, Greg Roelofs, Kai Uwe Rommel, Steve Salisbury, Dave Smith,
Steven M. Schweda, Christian Spieler, Cosmin Truta, Antoine Verheijen, Paul von
Behren, Rich Wales, Mike White.
This software is provided “as is,” without warranty of any kind, express or implied. In
no event shall Info-ZIP or its contributors be held liable for any direct, indirect,
incidental, special or consequential damages arising out of the use of or inability to use
this software.
Permission is granted to anyone to use this software for any purpose, including
commercial applications, and to alter it and redistribute it freely, subject to the above
disclaimer and the following restrictions:
1. Redistributions of source code (in whole or in part) must retain the above copyright
notice, definition, disclaimer, and this list of conditions.
2. Redistributions in binary form (compiled executables and libraries) must reproduce
the above copyright notice, definition, disclaimer, and this list of conditions in
documentation and/or other materials provided with the distribution. Additional
documentation is not needed for executables where a command line license option
provides these and a note regarding this option is in the executable’s startup banner.
The sole exception to this condition is redistribution of a standard UnZipSFX
binary (including SFXWiz) as part of a self-extracting archive; that is permitted
without inclusion of this license, as long as the normal SFX banner has not been
removed from the binary or disabled.
3. Altered versions--including, but not limited to, ports to new operating systems,
existing ports with new graphical interfaces, versions with modified or added
functionality, and dynamic, shared, or static library versions not from Info-ZIP--
must be plainly marked as such and must not be misrepresented as being the
original source or, if binaries, compiled from the original source. Such altered
versions also must not be misrepresented as being Info-ZIP releases--including, but
not limited to, labeling of the altered versions with the names “Info-ZIP” (or any
variation thereof, including, but not limited to, different capitalizations), “Pocket
UnZip,” “WiZ” or “MacZip” without the explicit permission of Info-ZIP. Such
altered versions are further prohibited from misrepresentative use of the Zip-Bugs
or Info-ZIP e-mail addresses or the Info-ZIP URL(s), such as to imply Info-ZIP
will provide support for the altered versions.
4. Info-ZIP retains the right to use the names “Info-ZIP,” “Zip,” “UnZip,”
“UnZipSFX,” “WiZ,” “Pocket UnZip,” “Pocket Zip,” and “MacZip” for its own
source and binary releases.
About zlib
Copyright notice:
© 1995-2004 Jean-loup Gailly and Mark Adler
This software is provided ‘as-is’, without any express or implied warranty. In no event
will the authors be held liable for any damages arising from the use of this software.
Permission is granted to anyone to use this software for any purpose, including
commercial applications, and to alter it and redistribute it freely, subject to the
following restrictions:
1. The origin of this software must not be misrepresented; you must not claim that you
wrote the original software. If you use this software in a product, an
acknowledgment in the product documentation would be appreciated but is not
required.
2. Altered source versions must be plainly marked as such, and must not be
misrepresented as being the original software.
3. This notice may not be removed or altered from any source distribution.
Jean-loup Gailly Mark Adler
jloup@gzip.org madler@alumni.caltech.edu
If you use the zlib library in a product, we would appreciate *not* receiving lengthy
legal documents to sign. The sources are provided for free but without warranty of any
kind. The library has been entirely written by Jean-loup Gailly and Mark Adler; it does
not include third-party code.
If you redistribute modified sources, we would appreciate that you include in the file
ChangeLog history information documenting your changes. Please read the FAQ for
more information on the distribution of modified source versions.
About 3DES
3DES
Des3Cipher - the triple-DES encryption method
Copyright © 1996 by Jef Poskanzer <jef@mail.acme.com>. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list
of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS “AS
IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
Visit the ACME Labs Java page for up-to-date versions of this and other fine Java
utilities: http:www.acme.com/java/
About AES
Cryptix General License
Copyright © 1995-2005 The Cryptix Foundation Limited. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
1. Redistributions of source code must retain the copyright notice, this list of
conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list
of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
About DES
DES
DesCipher - the DES encryption method
The meat of this code is by Dave Zimmerman <dzimm@widget.com>, and is:
Copyright © 1996 Widget Workshop, Inc. All Rights Reserved.
Permission to use, copy, modify, and distribute this software and its documentation for
NON-COMMERCIAL or COMMERCIAL purposes and without fee is hereby granted,
provided that this copyright notice is kept intact.
WIDGET WORKSHOP MAKES NO REPRESENTATIONS OR WARRANTIES
ABOUT THE SUITABILITY OF THE SOFTWARE, EITHER EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-
INFRINGEMENT. WIDGET WORKSHOP SHALL NOT BE LIABLE FOR ANY
DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.
THIS SOFTWARE IS NOT DESIGNED OR INTENDED FOR USE OR RESALE AS
ON-LINE CONTROL EQUIPMENT IN HAZARDOUS ENVIRONMENTS
REQUIRING FAIL-SAFE PERFORMANCE, SUCH AS IN THE OPERATION OF
NUCLEAR FACILITIES, AIRCRAFT NAVIGATION OR COMMUNICATION
SYSTEMS, AIR TRAFFIC CONTROL, DIRECT LIFE SUPPORT MACHINES, OR
WEAPONS SYSTEMS, IN WHICH THE FAILURE OF THE SOFTWARE COULD
LEAD DIRECTLY TO DEATH, PERSONAL INJURY, OR SEVERE PHYSICAL
OR ENVIRONMENTAL DAMAGE (“HIGH RISK ACTIVITIES”). WIDGET
WORKSHOP SPECIFICALLY DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY OF FITNESS FOR HIGH RISK ACTIVITIES.
The rest of the code is:
Copyright © 1996 by Jef Poskanzer <jef@mail.acme.com>. All rights reserved.
xii
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials
provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS “AS
IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
Visit the ACME Labs Java page for up-to-date versions of this and other fine Java
utilities: http:www.acme.com/java/
About OpenSSL
Copyright © 1998-2008 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
2. 2. Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display
the following acknowledgment:
“This product includes software developed by the OpenSSL Project for use in the
OpenSSL Toolkit. (http://www.openssl.org/)”
4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to
endorse or promote products derived from this software without prior written
permission. For written permission, please contact openssl-core@openssl.org.
5. Products derived from this software may not be called “OpenSSL” nor may
“OpenSSL” appear in their names without prior written permission of the OpenSSL
Project.
6. Redistributions of any form whatsoever must retain the following
acknowledgment:
‘This product includes software developed by the OpenSSL Project for use in the
OpenSSL Toolkit (http://www.openssl.org/)”
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS” AND ANY
EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
This product includes cryptographic software written by Eric Young
(eay@cryptsoft.com). This product includes software written by Tim Hudson
(tjh@cryptsoft.com).
Original SSLeay License
Copyright © 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved.
This package is an SSL implementation written by Eric Young (eay@cryptsoft.com).
The implementation was written so as to conform with Netscapes SSL.
This library is free for commercial and non-commercial use as long as the following
conditions are aheared to. The following conditions apply to all code found in this
distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The
SSL documentation included with this distribution is covered by the same copyright
terms except that the holder is Tim Hudson (tjh@cryptsoft.com).
Copyright remains Eric Young’s, and as such any Copyright notices in the code are not
to be removed. If this package is used in a product, Eric Young should be given
attribution as the author of the parts of the library used. This can be in the form of a
textual message at program startup or in documentation (online or textual) provided
with the package.
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
1. Redistributions of source code must retain the copyright notice, this list of
conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list
of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display
the following acknowledgement:
“This product includes cryptographic software written by Eric Young
(eay@cryptsoft.com)” The word ‘cryptographic’ can be left out if the rouines from
the library being used are not cryptographic related :-).
4. If you include any Windows specific code (or a derivative thereof) from the apps
directory (application code) you must include an acknowledgement:
“This product includes software written by Tim Hudson (tjh@cryptsoft.com)”
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EXPRESS
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
The licence and distribution terms for any publically available version or derivative of
this code cannot be changed. i.e. this code cannot simply be copied and put under
another distribution licence [including the GNU Public Licence.]
About WPA Supplicant, WPA Supplicant (WPS)
WPA Supplicant
Copyright © 2003-2012, Jouni Malinen <j@w1.fi> and contributors
All Rights Reserved.
This program is licensed under the BSD license (the one with advertisement clause
removed).
If you are submitting changes to the project, please see CONTRIBUTIONS file for
more instructions.
License
This software may be distributed, used, and modified under the terms of BSD license:
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials
provided with the distribution.
3. Neither the name(s) of the above-listed copyright holder(s) nor the names of its
contributors may be used to endorse or promote products derived from this software
without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
About FreeType
The FreeType Project LICENSE
2006-Jan-27
Copyright 1996-2002, 2006 by
David Turner, Robert Wilhelm, and Werner Lemberg
Introduction
The FreeType Project is distributed in several archive packages; some of them may
contain, in addition to the FreeType font engine, various tools and contributions which
rely on, or relate to, the FreeType Project.
This license applies to all files found in such packages, and which do not fall under their
own explicit license. The license affects thus the FreeType font engine, the test
programs, documentation and makefiles, at the very least.
This license was inspired by the BSD, Artistic, and IJG (Independent JPEG Group)
licenses, which all encourage inclusion and use of free software in commercial and
freeware products alike. As a consequence, its main points are that:
We don’t promise that this software works. However, we will be interested in any
kind of bug reports. (‘as is’ distribution)
You can use this software for whatever you want, in parts or full form, without
having to pay us. (‘royalty-free’ usage)
You may not pretend that you wrote this software. If you use it, or only parts of it, in
a program, you must acknowledge somewhere in your documentation that you have
used the FreeType code. (‘credits’)
We specifically permit and encourage the inclusion of this software, with or without
modifications, in commercial products. We disclaim all warranties covering The
FreeType Project and assume no liability related to The FreeType Project.
Finally, many people asked us for a preferred form for a credit/disclaimer to use in
compliance with this license. We thus encourage you to use the following text:
Portions of this software are copyright © <year> The FreeType Project
(www.freetype.org). All rights reserved.
xiii
Please replace <year> with the value from the FreeType version you actually use.
Legal Terms
0. Definitions
Throughout this license, the terms ‘package’, ‘FreeType Project’, and ‘FreeType
archive’ refer to the set of files originally distributed by the authors (David Turner,
Robert Wilhelm, and Werner Lemberg) as the ‘FreeType Project’, be they named as
alpha, beta or final release.
‘You’ refers to the licensee, or person using the project, where ‘using’ is a generic term
including compiling the project’s source code as well as linking it to form a ‘program’
or ‘executable’. This program is referred to as ‘a program using the FreeType engine’.
This license applies to all files distributed in the original FreeType Project, including
all source code, binaries and documentation, unless otherwise stated in the file in its
original, unmodified form as distributed in the original archive. If you are unsure
whether or not a particular file is covered by this license, you must contact us to verify
this.
The FreeType Project is copyright © 1996-2000 by David Turner, Robert Wilhelm, and
Werner Lemberg. All rights reserved except as specified below.
1. No Warranty
THE FREETYPE PROJECT IS PROVIDED ‘AS IS’ WITHOUT WARRANTY OF
ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED
TO, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. IN NO EVENT WILL ANY OF THE AUTHORS OR
COPYRIGHT HOLDERS BE LIABLE FOR ANY DAMAGES CAUSED BY THE
USE OR THE INABILITY TO USE, OF THE FREETYPE PROJECT.
2. Redistribution
This license grants a worldwide, royalty-free, perpetual and irrevocable right and
license to use, execute, perform, compile, display, copy, create derivative works of,
distribute and sublicense the FreeType Project (in both source and object code forms)
and derivative works thereof for any purpose; and to authorize others to exercise some
or all of the rights granted herein, subject to the following conditions:
Redistribution of source code must retain this license file (‘FTL.TXT’) unaltered;
any additions, deletions or changes to the original files must be clearly indicated in
accompanying documentation. The copyright notices of the unaltered, original files
must be preserved in all copies of source files.
Redistribution in binary form must provide a disclaimer that states that the software
is based in part of the work of the FreeType Team, in the distribution documentation.
We also encourage you to put an URL to the FreeType web page in your
documentation, though this isn’t mandatory.
These conditions apply to any software derived from or based on the FreeType Project,
not just the unmodified files. If you use our work, you must acknowledge us. However,
no fee need be paid to us.
3. Advertising
Neither the FreeType authors and contributors nor you shall use the name of the other
for commercial, advertising, or promotional purposes without specific prior written
permission.
We suggest, but do not require, that you use one or more of the following phrases to
refer to this software in your documentation or advertising materials: ‘FreeType
Project’, ‘FreeType Engine’, ‘FreeType library’, or ‘FreeType Distribution’.
As you have not signed this license, you are not required to accept it. However, as the
FreeType Project is copyrighted material, only this license, or another one contracted
with the authors, grants you the right to use, distribute, and modify it. Therefore, by
using, distributing, or modifying the FreeType Project, you indicate that you understand
and accept all the terms of this license.
4. Contacts
There are two mailing lists related to FreeType:
freetype@nongnu.org
Discusses general use and applications of FreeType, as well as future and wanted
additions to the library and distribution. If you are looking for support, start in this list if
you haven’t found anything to help you in the documentation.
o freetype-devel@nongnu.org
Discusses bugs, as well as engine internals, design issues, specific licenses, porting, etc.
Our home page can be found at
http://www.freetype.org
About fonts
Fonts are © Bitstream (see below). DejaVu changes are in public domain.
Glyphs imported from Arev fonts are © Tavmjong Bah (see below)
Bitstream Vera Fonts Copyright
Copyright © 2003 by Bitstream, Inc. All Rights Reserved. Bitstream Vera is a
trademark of Bitstream, Inc.
Permission is hereby granted, free of charge, to any person obtaining a copy of the fonts
accompanying this license (“Fonts”) and associated documentation files (the “Font
Software”), to reproduce and distribute the Font Software, including without limitation
the rights to use, copy, merge, publish, distribute, and/or sell copies of the Font
Software, and to permit persons to whom the Font Software is furnished to do so,
subject to the following conditions:
The above copyright and trademark notices and this permission notice shall be included
in all copies of one or more of the Font Software typefaces.
The Font Software may be modified, altered, or added to, and in particular the designs
of glyphs or characters in the Fonts may be modified and additional glyphs or
characters may be added to the Fonts, only if the fonts are renamed to names not
containing either the words “Bitstream” or the word “Vera”.
This License becomes null and void to the extent applicable to Fonts or Font Software
that has been modified and is distributed under the “Bitstream Vera” names.
The Font Software may be sold as part of a larger software package but no copy of one
or more of the Font Software typefaces may be sold by itself.
THE FONT SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF
ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT OF COPYRIGHT, PATENT,
TRADEMARK, OR OTHER RIGHT. IN NO EVENT SHALL BITSTREAM OR THE
GNOME FOUNDATION BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, INCLUDING ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL,
OR CONSEQUENTIAL DAMAGES, WHETHER IN AN ACTION OF CONTRACT,
TORT OR OTHERWISE, ARISING FROM, OUT OF THE USE OR INABILITY TO
USE THE FONT SOFTWARE OR FROM OTHER DEALINGS IN THE FONT
SOFTWARE.
Except as contained in this notice, the names of Gnome, the Gnome Foundation, and
Bitstream Inc., shall not be used in advertising or otherwise to promote the sale, use or
other dealings in this Font Software without prior written authorization from the Gnome
Foundation or Bitstream Inc., respectively. For further information, contact: fonts at
gnome dot org.
Arev Fonts Copyright
Copyright © 2006 by Tavmjong Bah. All Rights Reserved.
Permission is hereby granted, free of charge, to any person obtaining a copy of the fonts
accompanying this license (“Fonts”) and associated documentation files (the “Font
Software”), to reproduce and distribute the modifications to the Bitstream Vera Font
Software, including without limitation the rights to use, copy, merge, publish,
distribute, and/or sell copies of the Font Software, and to permit persons to whom the
Font Software is furnished to do so, subject to the following conditions:
The above copyright and trademark notices and this permission notice shall be included
in all copies of one or more of the Font Software typefaces.
The Font Software may be modified, altered, or added to, and in particular the designs
of glyphs or characters in the Fonts may be modified and additional glyphs or
characters may be added to the Fonts, only if the fonts are renamed to names not
containing either the words “Tavmjong Bah” or the word “Arev”.
This License becomes null and void to the extent applicable to Fonts or Font Software
that has been modified and is distributed under the “Tavmjong Bah Arev” names.
The Font Software may be sold as part of a larger software package but no copy of one
or more of the Font Software typefaces may be sold by itself.
THE FONT SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF
ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT OF COPYRIGHT, PATENT,
TRADEMARK, OR OTHER RIGHT. IN NO EVENT SHALL TAVMJONG BAH BE
LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, INCLUDING
ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR
OTHERWISE, ARISING FROM, OUT OF THE USE OR INABILITY TO USE THE
FONT SOFTWARE OR FROM OTHER DEALINGS IN THE FONT SOFTWARE.
Except as contained in this notice, the name of Tavmjong Bah shall not be used in
advertising or otherwise to promote the sale, use or other dealings in this Font Software
without prior written authorization from Tavmjong Bah. For further information,
contact: tavmjong@free. fr.
About International Components for Unicode
ICU License - ICU 1.8.1 and later
COPYRIGHT AND PERMISSION NOTICE
Copyright © 1995-2003 International Business Machines Corporation and others
All rights reserved.
Permission is hereby granted, free of charge, to any person obtaining a copy of this
software and associated documentation files (the “Software”), to deal in the Software
without restriction, including without limitation the rights to use, copy, modify, merge,
publish, distribute, and/or sell copies of the Software, and to permit persons to whom
the Software is furnished to do so, provided that the above copyright notice(s) and this
permission notice appear in all copies of the Software and that both the above copyright
notice(s) and this permission notice appear in supporting documentation.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY
KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO
EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN THIS
NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL INDIRECT OR
CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER
RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
OF THIS SOFTWARE.
Except as contained in this notice, the name of a copyright holder shall not be used in
advertising or otherwise to promote the sale, use or other dealings in this Software
without prior written authorization of the copyright holder.
All trademarks and registered trademarks mentioned herein are the property of their
respective owners.
About Independent JPEG Group’s software, libjpeg
In plain English:
1. We don’t promise that this software works. (But if you find any bugs, please let us
know!)
2. You can use this software for whatever you want. You don’t have to pay us.
3. You may not pretend that you wrote this software. If you use it in a program, you
must acknowledge somewhere in your documentation that you’ve used the IJG code.
In legalese:
The authors make NO WARRANTY or representation, either express or implied, with
respect to this software, its quality, accuracy, merchantability, or fitness for a particular
purpose. This software is provided “AS IS”, and you, its user, assume the entire risk as
to its quality and accuracy.
This software is copyright © 1991-2009, Thomas G. Lane, Guido Vollbeding.
xiv
All Rights Reserved except as specified below.
Permission is hereby granted to use, copy, modify, and distribute this software (or
portions thereof) for any purpose, without fee, subject to these conditions:
(1) If any part of the source code for this software is distributed, then this README file
must be included, with this copyright and no-warranty notice unaltered; and any
additions, deletions, or changes to the original files must be clearly indicated in
accompanying documentation.
(2) If only executable code is distributed, then the accompanying documentation must
state that “this software is based in part on the work of the Independent JPEG Group”.
(3) Permission for use of this software is granted only if the user accepts full
responsibility for any undesirable consequences; the authors accept NO LIABILITY for
damages of any kind.
These conditions apply to any software derived from or based on the IJG code, not just
to the unmodified library. If you use our work, you ought to acknowledge us.
Permission is NOT granted for the use of any IJG author’s name or company name in
advertising or publicity relating to this software or products derived from it. This
software may be referred to only as “the Independent JPEG Group’s software”.
We specifically permit and encourage the use of this software as the basis of
commercial products, provided that all warranty or liability claims are assumed by the
product vendor.
ansi2knr.c is included in this distribution by permission of L. Peter Deutsch, sole
proprietor of its copyright holder, Aladdin Enterprises of Menlo Park, CA. ansi2knr.c is
NOT covered by the above copyright and conditions, but instead by the usual
distribution terms of the Free Software Foundation; principally, that you must include
source code if you redistribute it. (See the file ansi2knr.c for full details.) However,
since ansi2knr.c is not needed as part of any program generated from the IJG code, this
does not limit you more than the foregoing paragraphs do.
The Unix configuration script “configure” was produced with GNU Autoconf. It is
copyright by the Free Software Foundation but is freely distributable. The same holds
for its supporting scripts (config.guess, config.sub, ltmain.sh). Another support script,
install-sh, is copyright by X Consortium but is also freely distributable.
The IJG distribution formerly included code to read and write GIF files. To avoid
entanglement with the Unisys LZW patent, GIF reading support has been removed
altogether, and the GIF writer has been simplified to produce “uncompressed GIFs”.
This technique does not use the LZW algorithm; the resulting GIF files are larger than
usual, but are readable by all standard GIF decoders.
We are required to state that
“The Graphics Interchange Format© is the Copyright property of
CompuServe Incorporated. GIF(sm) is a Service Mark property of
CompuServe Incorporated.”
About libpng
This copy of the libpng notices is provided for your convenience. In case of any
discrepancy between this copy and the notices in the file png.h that is included in the
libpng distribution, the latter shall prevail.
COPYRIGHT NOTICE, DISCLAIMER, and LICENSE:
If you modify libpng you may insert additional notices immediately following this
sentence. This code is released under the libpng license.
libpng versions 1.2.6, August 15, 2004, through 1.2.47, February 18, 2012, are
Copyright © 2004, 2006-2009 Glenn Randers-Pehrson, and are distributed according to
the same disclaimer and license as libpng-1.2.5 with the following individual added to
the list of Contributing Authors
Cosmin Truta
libpng versions 1.0.7, July 1, 2000, through 1.2.5 - October 3, 2002, are Copyright
© 2000-2002 Glenn Randers-Pehrson, and are distributed according to the same
disclaimer and license as libpng-1.0.6 with the following individuals added to the
list of Contributing Authors
Simon-Pierre Cadieux
Eric S. Raymond
Gilles Vollant
and with the following additions to the disclaimer:
There is no warranty against interference with your enjoyment of the library or
against infringement. There is no warranty that our efforts or the library will fulfill
any of your particular purposes or needs. This library is provided with all faults,
and the entire risk of satisfactory quality, performance, accuracy, and effort is with
the user.
libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are Copyright ©
1998, 1999 Glenn Randers-Pehrson, and are distributed according to the same
disclaimer and license as libpng-0.96, with the following individuals added to the list of
Contributing Authors:
Tom Lane
Glenn Randers-Pehrson
Willem van Schaik
libpng versions 0.89, June 1996, through 0.96, May 1997, are Copyright © 1996, 1997
Andreas Dilger Distributed according to the same disclaimer and license as libpng-0.88,
with the following individuals added to the list of Contributing Authors:
John Bowler
Kevin Bracey
Sam Bushell
Magnus Holmgren
Greg Roelofs
Tom Tanner
libpng versions 0.5, May 1995, through 0.88, January 1996, are Copyright © 1995,
1996 Guy Eric Schalnat, Group 42, Inc.
For the purposes of this copyright and license, “Contributing Authors” is defined as the
following set of individuals:
Andreas Dilger
Dave Martindale
Guy Eric Schalnat
Paul Schmidt
Tim Wegner
The PNG Reference Library is supplied “AS IS”. The Contributing Authors and Group
42, Inc. disclaim all warranties, expressed or implied, including, without limitation, the
warranties of merchantability and of fitness for any purpose. The Contributing Authors
and Group 42, Inc. assume no liability for direct, indirect, incidental, special,
exemplary, or consequential damages, which may result from the use of the PNG
Reference Library, even if advised of the possibility of such damage.
Permission is hereby granted to use, copy, modify, and distribute this source code, or
portions hereof, for any purpose, without fee, subject to the following restrictions:
1. The origin of this source code must not be misrepresented.
2. Altered versions must be plainly marked as such and must not be misrepresented
as being the original source.
3. This Copyright notice may not be removed or altered from any source or altered
source distribution.
The Contributing Authors and Group 42, Inc. specifically permit, without fee, and
encourage the use of this source code as a component to supporting the PNG file format
in commercial products. If you use this source code in a product, acknowledgment is
not required but would be appreciated.
A “png_get_copyright” function is available, for convenient use in “about” boxes and
the like:
printf(“%s”,png_get_copyright(NULL));
Also, the PNG logo (in PNG format, of course) is supplied in the files “pngbar.png” and
“pngbar.jpg (88x31) and “pngnow.png” (98x31).
Libpng is OSI Certified Open Source Software. OSI Certified Open Source is a
certification mark of the Open Source Initiative.
Glenn Randers-Pehrson
glennrp at users.sourceforge.net
February 18, 2012
About Apple Lossless Audio Codec
Copyright © 2011 Apple Inc. All rights reserved.
Licensed under the Apache License, Version 2.0 (the “License”); you may not use this
file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the
License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR
CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and limitations under
the License.
About FLAC codec library
Copyright © 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Josh Coalson
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials
provided with the distribution.
Neither the name of the Xiph.org Foundation nor the names of its contributors may
be used to endorse or promote products derived from this software without specific
prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
xv
Information for Users on Collection and
Disposal of Old Equipment and Used Batteries
These symbols on the products, packaging, and/or
accompanying documents mean that used electrical
and electronic products and batteries should not be
mixed with general household waste.
For proper treatment, recovery and recycling of old
products and used batteries, please take them to
applicable collection points, in accordance with your
national legislation and the Directives 2002/96/EC
and 2006/66/EC.
By disposing of these products and batteries
correctly, you will help to save valuable resources
and prevent any potential negative effects on human
health and the environment which could otherwise
arise from inappropriate waste handling.
For more information about collection and recycling
of old products and batteries, please contact your
local municipality, your waste disposal service or the
point of sale where you purchased the items.
[Information on Disposal in other Countries
outside the European Union]
These symbols are only valid in the European Union.
If you wish to discard these items, please contact
your local authorities or dealer and ask for the
correct method of disposal.
Note for the battery symbol (bottom two
symbol examples):
This symbol might be used in combination with a
chemical symbol. In this case it complies with the
requirement set by the Directive for the chemical
involved.
Information concernant la Collecte et le
Traitement des piles usagées et des déchets
d’équipements électriques et électroniques
Les symboles sur les produits, l’emballage et/ou les
documents joints signifient que les produits
électriques ou électroniques usagés ainsi que les
piles ne doivent pas être mélangés avec les déchets
domestiques habituels.
Pour un traitement, une récupération et un recyclage
appropriés des déchets d’équipements électriques et
électroniques et des piles usagées, veuillez les
déposer aux points de collecte prévus à cet effet,
conformément à la réglementation nationale et aux
Directives 2002/96/EC et 2006/66/EC.
En vous débarrassant correctement des déchets
d’équipements électriques et électroniques et des
piles usagées, vous contribuerez à la sauvegarde de
précieuses ressources et à la prévention de potentiels
effets négatifs sur la santé humaine qui pourraient
advenir lors d’un traitement inapproprié des déchets.
Pour plus d’informations à propos de la collecte et du
recyclage des déchets d’équipements électriques et
électroniques et des piles usagées, veuillez contacter
votre municipalité, votre service de traitement des
déchets ou le point de vente où vous avez acheté les
produits.
[Information sur le traitement dans d’autres
pays en dehors de l’Union Européenne]
Ces symboles sont seulement valables dans l’Union
Européenne. Si vous souhaitez vous débarrasser de
déchets d’équipements électriques et électroniques
ou de piles usagées, veuillez contacter les autorités
locales ou votre fournisseur et demander la méthode
de traitement appropriée.
Note pour le symbole “pile” (deux exemples
de symbole ci-dessous):
Ce symbole peut être utilisé en combinaison avec un
symbole chimique. Dans ce cas il respecte les
exigences établies par la Directive pour le produit
chimique en question.
Verbraucherinformation zur Sammlung und
Entsorgung alter Elektrogeräte und benutzter
Batterien
Befinden sich diese Symbole auf den Produkten, der
Verpackung und/oder beiliegenden Unterlagen, so
sollten benutzte elektrische Geräte und Batterien nicht
mit dem normalen Haushaltsabfall entsorgt werden.
In Übereinstimmung mit Ihren nationalen
Bestimmungen und den Richtlinien 2002/96/EC und
2006/66/EC, bringen Sie alte Geräte und benutzte
Batterien bitte zur fachgerechten Entsorgung,
Wiederaufbereitung und Wiederverwendung zu den
entsprechenden Sammelstellen.
Durch die fachgerechte Entsorgung der Elektrogeräte
und Batterien helfen Sie, wertvolle Ressourcen zu
schützen und verhindern mögliche negative
Auswirkungen auf die menschliche Gesundheit und
die Umwelt, die andernfalls durch unsachgerechte
Müllentsorgung auftreten könnten.
Für weitere Informationen zum Sammeln und
Wiederaufbereiten alter Elektrogeräte und Batterien,
kontaktieren Sie bitte Ihre örtliche Stadt- oder
Gemeindeverwaltung, Ihren Abfallentsorgungsdienst
oder die Verkaufsstelle der Artikel.
[Entsorgungsinformation für Länder
außerhalb der Europäischen Union]
Diese Symbole gelten nur innerhalb der
Europäischen Union. Wenn Sie solche Artikel
ausrangieren möchten, kontaktieren Sie bitte Ihre
örtlichen Behörden oder Ihren Händler und fragen
Sie nach der sachgerechten Entsorgungsmethode.
Anmerkung zum Batteriesymbol (untere
zwei Symbolbeispiele):
Dieses Symbol kann auch in Kombination mit einem
chemischen Symbol verwendet werden. In diesem
Fall entspricht dies den Anforderungen der Direktive
zur Verwendung chemischer Stoffe.
Användarinformation, beträffande insamling
och dumpning av gammal utrustning och
använda batterier
De symboler, som finns på produkterna, emballaget
och/eller bifogade dokument talar om att de använda
elektriska och elektroniska produkterna, samt
batterierna, inte ska blandas med allmänt
hushållsavfall.
För rätt handhavande, återställande och återvinning
av gamla produkter och gamla batterier, vänligen
medtag dessa till lämpliga insamlingsplatser, i
enlighet med din nationella lagstiftning och
direktiven 2002/96/EC samt 2006/66/EC.
Genom att slänga dessa produkter och batterier på
rätt sätt, kommer du att hjälpa till att rädda värdefulla
resurser och förhindra möjliga negativa effekter på
mänsklig hälsa och miljö, vilka i annat fall skulle
kunna uppstå, p.g.a. felaktig sophantering.
För mer information om insamling och återvinning
av gamla produkter och batterier, vänligen kontakta
din lokala kommun, ditt sophanteringsföretag eller
inköpsstället för dina varor.
[Information om sophantering i andra länder
utanför EU]
Dessa symboler gäller endast inom EU. Om du vill
slänga dessa föremål, vänligen kontakta dina lokala
myndigheter eller försäljare och fråga efter det
korrekta sättet att slänga dem.
Kommentar ang. batterisymbolen (de två
nedersta symbolexemplen):
Denna symbol kan komma att användas i
kombination med en kemisk symbol. I detta fall
överensstämmer den med de krav, som har ställts
genom direktiven för den aktuella kemikalien.
xvi
Informazioni per gli utenti sulla raccolta e lo
smaltimento di vecchia attrezzatura e batterie
usate
Questi simboli sui prodotti, sull’imballaggio, e/o sui
documenti che li accompagnano significano che i
prodotti e le batterie elettriche e elettroniche non
dovrebbero essere mischiati con i rifiuti domestici
generici.
Per il trattamento, recupero e riciclaggio appropriati
di vecchi prodotti e batterie usate, li porti, prego, ai
punti di raccolta appropriati, in accordo con la Sua
legislazione nazionale e le direttive 2002/96/CE e
2006/66/CE.
Smaltendo correttamente questi prodotti e batterie,
Lei aiuterà a salvare risorse preziose e a prevenire
alcuni potenziali effetti negativi sulla salute umana e
l’ambiente, che altrimenti potrebbero sorgere dal
trattamento improprio dei rifiuti.
Per ulteriori informazioni sulla raccolta e il
riciclaggio di vecchi prodotti e batterie, prego
contatti la Sua amministrazione comunale locale, il
Suo servizio di smaltimento dei rifiuti o il punto
vendita dove Lei ha acquistato gli articoli.
[Informazioni sullo smaltimento negli altri
Paesi al di fuori dell’Unione europea]
Questi simboli sono validi solamente nell’Unione
europea. Se Lei desidera disfarsi di questi articoli,
prego contatti le Sue autorità locali o il rivenditore e
richieda la corretta modalità di smaltimento.
Noti per il simbolo della batteria (sul fondo
due esempi di simbolo):
È probabile che questo simbolo sia usato in
combinazione con un simbolo chimico. In questo
caso è conforme al requisito stabilito dalla direttiva
per gli elementi chimici contenuti.
Información para Usuarios sobre Recolección y
Disposición de Equipamiento Viejo y Baterías
usadas
Estos símbolos en los productos, embalaje, y/o
documentación que se acompañe significan que los
productos electrónicos y eléctricos usados y las
baterías usadas no deben ser mezclados con desechos
hogareños corrientes.
Para el tratamiento, recuperación y reciclado
apropiado de los productos viejos y las baterías
usadas, por favor llévelos a puntos de recolección
aplicables, de acuerdo a su legislación nacional y las
directivas 2002/96/EC y 2006/66/EC.
Al disponer de estos productos y baterías
correctamente, ayudará a ahorrar recursos valiosos y
a prevenir cualquier potencial efecto negativo sobre
la salud humana y el medio ambiente, el cual podría
surgir de un inapropiado manejo de los desechos.
Para mayor información sobre recolección y
reciclado de productos viejos y baterías, por favor
contacte a su municipio local, su servicio de gestión
de residuos o el punto de venta en el cual usted
adquirió los artículos.
[Información sobre la Disposición en otros
países fuera de la Unión Europea]
Estos símbolos sólo son válidos en la Unión
Europea. Si desea deshacerse de estos artículos, por
favor contacte a sus autoridades locales y pregunte
por el método correcto de disposición.
Nota sobre el símbolo de la batería
(ejemplos de dos símbolos de la parte
inferior)
Este símbolo podría ser utilizado en combinación
con un símbolo químico. En este caso el mismo
obedece a un requerimiento dispuesto por la
Directiva para el elemento químico involucrado.
Informatie voor gebruikers van inzameling en
verwijdering van oude apparaten en gebruikte
batterijen
Deze tekens op de producten, verpakkingen en/of
bijgaande documenten betekent dat gebruikte
elektrische en elektronische producten en batterijen
niet mogen worden gemengd met algemeen
huishoudelijk afval.
Breng alstublieft voor de juiste behandeling,
herwinning en hergebruik van oude producten en
gebruikte batterijen deze naar daarvoor bestemde
verzamelpunten, in overeenstemming met uw
nationale wetgeving en de instructies 2002/96/EC en
2006/66/EC.
Door deze producten en batterijen juist te
rangschikken, helpt u het redden van waardevolle
rijkdommen en voorkomt u mogelijke negatieve
effecten op de menselijke gezondheid en de
omgeving, welke zich zou kunnen voordoen door
ongepaste afvalverwerking.
Voor meer informatie over het inzamelen en
hergebruik van oude producten en batterijen kunt u
contact opnemen met uw plaatselijke gemeente, uw
afvalverwerkingsbedrijf of het verkooppunt waar u
de artikelen heeft gekocht.
[Informatie over verwijdering in ander
landen buiten de Europese Unie]
Deze symbolen zijn alleen geldig in de Europese
Unie. Mocht u artikelen weg willen gooien, neem
dan alstublieft contact op met uw plaatselijke
overheidsinstantie of dealer en vraag naar de juiste
manier van verwijderen.
Opmerking bij het batterij teken (onderkant
twee tekens voorbeelden):
Dit teken wordt mogelijk gebruikt in combinatie met
een chemisch teken. In dat geval voldoet het aan de
eis en de richtlijn, welke is opgesteld voor het
betreffende chemisch product.
xvii
The laser component in this product is capable of
emitting radiation exceeding the limit for Class 1.
LASER Specification:
Class 1 LASER Product
Wave length: 790 nm (CDs)/658 nm (DVDs)/405 nm
(BDs)
Laser output: max. 1 mW
Le laser de cet appareil peut émettre un rayonnement
dépassant les limites de la classe 1.
Caractéristiques du LASER:
Produit LASER de Classe 1
Longueur d’onde: 790 nm (pour les CD)/658 nm (pour
les DVD)/405 nm (pour les Blu-ray)
Puissance du laser: max. 1 mW
Die Laser-Komponente in diesem Produkt kann eine
Strahlung abgeben, die den Grenzwert der Klasse 1
übersteigt.
LASER-Spezifikation:
LASER-Produkt der Klasse 1
Wellenlänge: 790 nm (CD)/658 nm (DVD)/405 nm
(BD)
Laser-Ausgang: max. 1 mW
Laserkomponenten i denna apparat kan avge en
strålning som överskrider gränsvärdet för klass 1.
LASER-specifikationer:
Klass 1 LASER-produkt
Våglängd: 790 nm (CD)/658 nm (DVD)/405 nm (BD)
Laseruteffekt: max. 1 mW
Il laser contenuto in questo prodotto è in grado di
emettere radiazioni eccedenti i limiti fissati per la
Classe 1.
Specifiche LASER:
Prodotto con LASER classe 1
Lunghezza d’onda: 790 nm (CDs)/658 nm (DVDs)/405
nm (BDs)
Emissione laser: max. 1 mW
El componente láser de este producto es capaz de emitir
radiación que sobrepasa el límite establecido para la
clase 1.
Especificaciones LÁSER:
Producto LÁSER de Clase 1
Longitud de onda: 790 nm (CD)/658 nm (DVD)/405
nm (BD)
Salida de láser: máxima de 1 mW
De lasercomponent in dit product is in staat stralen te
produceren die de limiet voor Klasse 1 overstijgen.
LASER specificatie:
Klasse 1 LASER product
Golflengte: 790 nm (CD’s)/658 nm (DVD’s)/405 nm
(BD’s)
Laservermogen: max. 1 mW
VARNING
Om apparaten används på annat sätt än i denna
bruksanvisning specificerats, kan användaren utsättas
för osynlig laserstrålning, som överskrider gränsen för
laserklass 1.
ADVARSEL
Usynlig laserstråling ved åbning. Undgå udsaettelse for
stråling.
VAROITUS
Laitteen käyttäminen muulla kuin tässä käyttöohjeesa
mainitulla tavalla saattaa altistaa käyttäjän
turvallisuusluokan 1 ylittävälle näkymättömälle
lasersäteilylle.
xviii
CAUTION:
INVISIBLE LASER RADIATION WHEN OPEN.
DO NOT STARE INTO BEAM.
INVISIBLE LASER RADIATION WHEN OPEN.
AVOID DIRECT EXPOSURE TO THE BEAM.
DANGER:
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may result
in hazardous radiation exposure.
AVERTISSEMENT
L’utilisation de commandes et l’emploi de réglages ou
de méthodes autres que ceux décrits ci-dessous,
peuvent entraîner une exposition à un rayonnement
dangereux.
VORSICHT
Die Verwendung von Bedienelementen oder die
Einstellung bzw. die Ausführung von anderen als in
dieser Anleitung beschriebenen Vorgängen kann zu
Gefährdung durch gefährliche Strahlung führen.
OBSERVERA
Användning av reglage eller justeringar eller utförande
av åtgärder på annat sätt än så som beskrivs häri kan
resultera i farlig strålning.
ATTENZIONE
L’uso di controlli, regolazioni, operazioni o procedure
non specificati in questo manuale possono risultare in
esposizione a radiazioni pericolose.
PRECAUCIÓN
El uso de los controles, los ajustes o los procedimientos
que no se especifican enste manual pueden causar una
exposición peligrosa a la radiación.
LET OP
Gebruik van bedieningsorganen, instellingen of
procedures anders dan beschreven in dit document kan
leiden tot blootstelling aan gevaarlijke stralen.
VAROITUS
Muiden kuin tässä esitettyjen toimintojen säädön tai
asetusten muutto saattaa altistaa vaaralliselle säteilylle
tai muille vaarallisille toiminnoille.
VARO!
AVATTAESSA JA SUOJALUKITUS
OHITETTAESSA OLET ALTTIINA
NÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE.
ÄLÄ KATSO SÄ TEESEEN.
VARNING!
OSYNLIG LASERSTRÅLNING NÄR DENNA DEL
ÄR ÖPPNAD OCH SPÄRREN ÄR URKOPPLAD.
BETRAKTA EJ STRÅLEN.
© 2013 Yamaha Corporation
Printed in China BD-S677/G
BD-S677
USB
5#%&
Blu-ray Disc Player
Lecteur Blu-ray Disc
BD-S677
Owner’s Manual
Mode d’emploi
Bedienungsanleitung
Bruksanvisning
Manuale di istruzioni
Manual de Instrucciones
Gebruiksaanwijzing
G
English Français Deutsch Svenska Italiano Español
Nederlands
00_BD-S677_G_cv.fm Page 1 Thursday, December 5, 2013 3:26 PM
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yamaha BD-S677 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yamaha BD-S677 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Zweeds als bijlage per email.

De handleiding is 12,51 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info