9
English
OPERATIONS
TO PLAY A SOURCE
1
Set to the “
∞
” position.
2
Turn the power on.
3
Select a desired input source.
*
If you select turntable as an input source (PHONO
position), you should confirm that the PHONO (MM/MC)
switch is set to the position corresponding to the type of
cartridge being used by the turntable. (Refer to page 12.)
4
Select the speakers to be used.
*
If you use two speaker systems, press both the A and B
switches.
5
Play the source.
6
Adjust to the desired output level.
7
If desired, adjust the BASS, TREBLE, BALANCE and
LOUDNESS controls, etc. (Refer to page 11–12.)
To turn off the power
Press the POWER switch again.
Caution
If you will press the PURE DIRECT switch to turn it on when
the LOUDNESS control is set at a position other than “FLAT”,
be sure to decrease the volume by turning the VOLUME
control counterclockwise before pressing the PURE DIRECT
switch, otherwise the volume may become extremely high
suddenly causing harm to your ears and damage to the
speakers.
1, 6
7
2
4
7
3
