517061
27
Verklein
Vergroot
Pagina terug
1/89
Pagina verder
22 02R Applications
Yamaha 02R & 03D Applications Guide
6
Two 02Rs with Four ADATs & BRC
This application shows how two 02Rs can be used with four Alesis ADATs and a BRC Master
Remote Control to create a 48-input, 32-track digital recording system. The 32 digital tape
returns and 48 Mic/Line inputs provide up to 80 inputs at mixdown. In addition, the 02Rs
built-in automation and scene memory systems provide both dynamic and static mix
automation referenced to timecode.
The two 02Rs are cascaded together using a 25-pin straight cable and two Cascade
(CD8-CS) cards, which are installed in Slot [3] of each 02R (could be Slot [4]). The
cascade connection carries the eight buses, any four of the eight AUX buses, Stereo bus, and
Solo bus. This allows both consoles to work together as one large 80-input mixing console.
The master section of 02R–B is used for monitoring and two-track operations. The studio
monitors and two-track recording equipment are also connected to this 02R.
Connections
The ADAT (CD8-AT) and Cascade (CD8-CS) cards must be screwed securely in place.
Do not leave the screws out after installation as the cards will not be grounded correctly.
The Digital In/Out connectors on the 02R and ADAT are connected together using the
Optical Cable. Press the DIGITAL IN buttons on the ADATs to use the DIGITAL IN.
ADAT–A is connected to Slot [1] of 02R–A and the tape inputs correspond to tracks one
through eight. ADAT–B is connected to Slot [2] of 02R–A and the tape inputs
correspond to tracks nine through sixteen. ADAT–C is connected to Slot [1] of 02R–B
and the tape inputs correspond to tracks 17 through 24. ADAT–D is connected to Slot
[2] of 02R–B and the tape inputs correspond to tracks 25 through 32.
The Alesis BRC Master Remote Control can control up to 16 ADATs (i.e. 128 tracks).
The BRC provides ADAT timecode to SMPTE timecode conversion. In addition, a
timecode offset can be specified, so the automix start time can be adjusted.
The 75 ohm wordclock termination switches on both 02Rs is set to ON.
02R Wordclock Setup
On the DIGITAL I/O menu, the wordclock source should be set to W.CLK.
ADAT & BRC Wordclock Setup
The BRC works as wordclock master and the four ADATs follows it automatically via the
9-pin sync cables. The sampling rate can be set to either 48 kHz or 44.1 kHz. Use Fixed
mode for 48 kHz and Variable mode for 44.1 kHz (using the PITCH DOWN button, set to
–147 cents. At which point “–146, 44.1, –148” appears on the display). The newer ADAT-XT
has dedicated switches for selecting these two sampling rates.
Notes
The ADATs must be powered up before the BRC and in the following order: D, C, B, A.
This is because when the BRC is powered up it checks how many ADATs are connected,
allocates them device numbers, and automatically sets the system clock.
The rear of the Cascade (CD8-CS) cards have an IN/OUT switch. On 02R–A is set to
OUT. On 02R–B it is set to IN.
To generate timecode on the BRC, press the GEN SYNC button.
The optional CD8-CS kit contains two CD8-CS cards and one 25-pin straight cable.
27

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yamaha 03D bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yamaha 03D in de taal/talen: Engels als bijlage per email.

De handleiding is 2,46 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Yamaha 03D

Yamaha 03D Gebruiksaanwijzing - Nederlands - 302 pagina's

Yamaha 03D Gebruiksaanwijzing - Deutsch - 307 pagina's

Yamaha 03D Gebruiksaanwijzing - Français - 300 pagina's

Yamaha 03D Gebruiksaanwijzing - Italiano - 301 pagina's

Yamaha 03D Gebruiksaanwijzing - Português - 141 pagina's

Yamaha 03D Gebruiksaanwijzing - Espanõl - 315 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info