517061
19
Verklein
Vergroot
Pagina terug
1/89
Pagina verder
14 02R Applications
Yamaha 02R & 03D Applications Guide
2
02R with ADAT & JL Cooper Datasync-2
This application shows how the 02R can be used with a JL Cooper Datasync-2 Synchronizer
to create a 24-input, 8-track digital recording system. The JL Cooper Datasync-2
Synchronizer is a cost-effective device for setting up a synchronized 02R and ADAT system.
The eight digital tape returns and 24 Mic/Line inputs provide up to 32 inputs at mixdown.
In addition, the 02Rs built-in automation and scene memory systems provide both
dynamic and static mix automation referenced to MIDI timecode.
Connections
The ADAT (CD8-AT) card must be screwed securely in place. Do not leave the screws out
after installation as the card will not be grounded correctly.
The Digital In/Out connectors on the 02R and ADAT are connected together using
Optical Cables. Press the DIGITAL IN button on the ADAT to use the DIGITAL IN.
The ADAT’s eight tracks connect to 02R slot [1], tape inputs one through eight.
The JL Cooper Datasync-2 Synchronizer converts the ADAT’s internal timecode to MIDI
timecode or SMPTE timecode.
A 9-pin Sync cable for connecting the ADAT and Datasync-2 is available from Alesis.
02R Wordclock Setup
The ADAT (CD8-AT) card is installed in Slot [1], so any pair of the first eight tape inputs
can be selected as the wordclock source on the DIGITAL I/O menu.
ADAT Wordclock Setup
The ADAT should be set as wordclock master. To confirm this, press the SET LOCATE and
DIGITAL IN buttons together. The display should show “int”, meaning internal wordclock.
The ADAT sampling rate can be set to either 48 kHz or 44.1 kHz. Use Fixed mode for
48 kHz and Variable mode for 44.1 kHz (using the PITCH DOWN button, set to –147 cents.
At which point “–146, 44.1, –148” appears on the display). The newer ADAT-XT has
dedicated switches for selecting these two sampling rates.
In Figure 2 the ADAT is shown as wordclock master. However, it could alternatively be used
as wordclock slave with the 02R as master. In this case, the ADAT would be set to digi”. This
can be confirmed by pressing the DIGITAL IN and SET LOCATE buttons together. The
internal clock can then be set on the 02R.
Notes
Press the DIGITAL IN button on the ADAT to use the DIGITAL INPUT.
19

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yamaha 03D bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yamaha 03D in de taal/talen: Engels als bijlage per email.

De handleiding is 2,46 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Yamaha 03D

Yamaha 03D Gebruiksaanwijzing - Nederlands - 302 pagina's

Yamaha 03D Gebruiksaanwijzing - Deutsch - 307 pagina's

Yamaha 03D Gebruiksaanwijzing - Français - 300 pagina's

Yamaha 03D Gebruiksaanwijzing - Italiano - 301 pagina's

Yamaha 03D Gebruiksaanwijzing - Português - 141 pagina's

Yamaha 03D Gebruiksaanwijzing - Espanõl - 315 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info