48716
104
Verklein
Vergroot
Pagina terug
1/156
Pagina verder
104
Remote Function List
01X Owner’s Manual
Before Using Basics Section AppendixGetting Started Reference
Remote Function List
•For information and instructions on setting up the 01X for remote control, refer to the Getting Started and the section “Demo
Song Playback/Remote Control Setup” in the separate Installation Guide booklet.
•For information on the Remote functions of the Multi Part Editor, refer to the Multi Part Editor owner’s manual (PDF file).
If necessary, set the display language for the DAW software to English (especially if letters are not displayed correctly).
Refer to the owner’s manual of your particular DAW for details.
Depending on the specifications of the particular DAW, there may be a time lag in transmitting control data, and as a result,
the parameter value indications and LED indications on the 01X may not match the indications in the DAW. If this happens,
refresh the display by operating a knob or the BANK buttons. (Depending on the particular DAW, refreshing the indications
in this way may not be possible.)
SQ01 V2: (In the Track View window, select “Remote Control” from the Setup menu and set the Mode to “01X.”)
On the 01X, set Remote Select (page 87) in the Utility mode to “GENERAL.
Button Function LED
Notes
(page 114)
In all modes:
[SHIFT]+[INTERNAL]
Exits from Remote mode, then starts Studio Manager.
[NAME/VALUE]
Changes the indication of the parameter name and its value.
[SHIFT]+[NAME/VALUE]
Changes the meter display mode.
DISPLAY [ / ]
Changes the parameter to be edited.
[SEL] (when [SEL] lamp flashes)
Fader touch-out (page 15)
flashes
goes out
[SEL]
(when [AUTO EDIT] lamp is on)
Fader touch-in (page 15)
flashes
[ON] (in normal status)
Turns each channel off or on (mutes/unmutes the signal).
lights/goes out *1
[SHIFT]+ [ON] of the Master Channel
(in normal status)
This sets all channels to the same off/on (mute/unmute) status as the master channel.
Pressing it again turns all channels on or off simultaneously. (Applies to the Channel
Module and Software Synthesizer Module.)
lights/goes out
[SHIFT] + [ON] of each channel
(in normal status)
This sets all channels (excepting the master channel) to the same off/on (mute/unmute)
status as the channel whose button was pressed. Pressing it again turns all channels
(excepting the master channel) on or off simultaneously. (Applies to the Channel Mod-
ule and Software Synthesizer Module.)
lights/goes out *1
[ON] (when [SOLO] lamp is on)
Turns the Solo function of each channel on or off. (Applies to the Channel Module/Soft-
ware Synthesizer Module.)
lights/goes out *2
[SHIFT]+[ON]
(when [SOLO] lamp is on)
This sets all channels (excepting the master channel) to the same Solo status as the chan-
nel whose [ON] button was pressed. Pressing it again turns Solo for all channels
(excepting the master channel) on or off simultaneously. (Applies to the Channel Mod-
ule and Software Synthesizer Module.)
lights/goes out *2
[ON]
([AUTO R/W] lights)
This switches the automation status for each channel in order: Off (unlit), Read (green),
Touch (orange) and Latch (red).
lights/goes out
[SHIFT]+[ON]
([AUTO R/W] lights)
This sets all channels to the same automation status as the channel whose [ON] button
was pressed. The settings are changed in order: Off (unlit), Read (green), Touch (orange)
and Latch (red).
lights/goes out
[AUTO EDIT]
Changes the function of the [SEL] button to the touch-in function. This button flashes
during automation touch-in.
lights
[SOLO]
Changes the function of the [ON] button to the Solo function.
lights
[SHIFT]+[SOLO]
Determines the Solo/Mute settings of the selected tracks.
[SHIFT]+[REC RDY]
Determines the recording on or off settings of the selected tracks.
[AUTO R/W]
Changes the function of the [ON] button to the AUTO R/W function.
lights
[AUDIO]
Starts the Audio Mixer or moves the Audio Mixer Window to the front of the computer
screen. This button operation applies to the channel module.
lights
[INST]
Starts the Audio Mixer or moves the Audio Mixer Window to the front of the computer
screen. This button operation applies to the Software Synthesizer module.
lights
[MIDI]
Starts the MIDI Editor (such as the Multi Part Editor) or moves it to the front of the com-
puter screen.
lights *3
[BUS/AUX]
Displays the AUX/BUS window or brings it to the front of the computer screen (when
the Audio Mixer is active).
lights
[OTHER]
Starts the Audio Mixer or brings it to the front of the computer screen. This operation
applies to the Effect module.
lights *4
BANK [</ >]
Scrolls through the track indication every eight channels.
104

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yamaha 01X bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yamaha 01X in de taal/talen: Engels als bijlage per email.

De handleiding is 3,56 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info