48716
44
Verklein
Vergroot
Pagina terug
1/156
Pagina verder
44
Getting Started
01X Owner’s Manual
Before Using Basics Section AppendixGetting Started Reference
Clean up sounds
Garbage in usually means garbage out. So make sure your
source sounds are as clean and noise-free as possible. Use
quality cabling, check microphone placement, turn off the
air conditioner or anything else causing hum, patch in a
noise gate, or change the pickups in your guitar if neces-
sary.
Apply EQ (page 48)
If you can’t eliminate noise problems at the source, you
can use the EQ on the 01X at this stage to cut it or mini-
mize it. The EQ library (page 99) contains several preset
programs for reducing hum, hiss, and noise. If you’re after
a natural sound, go back to the last step—it’s always better
to try to correct the sound source itself rather than correct-
ing with EQ. You’ll probably need to readjust the EQ
when listening to all sounds in the mix, anyway.
Apply compression (page 52)
If your vocalist is alternately too loud and too soft, or the
bass fluctuates too wildly in level, or the guitar doesn’t
have enough presence—compression may be the answer.
The Dynamics library contains a wide variety of preset
programs for correcting, smoothing or enhancing the
sound during recording, or after.
After Recording:
Set up stereo pairs (page 54)
This links adjacent input channels (1 and 2, 3 and 4,
etc.)—making it easy to unify level settings for both chan-
nels, as well as EQ, Dynamics, and other settings (except
pan and phase).
Pan the sounds (page 55)
Not only does panning allow you to create a more interest-
ing stereo sound field, it lets you create more sonic space
for each instrument in the mix. There are no hard and fast
guidelines here, but generally pan to center the bass (which
is non-directional anyway) and the lead vocal. Anything
you’ve tracked in stereo should obviously be panned hard
left and right (such as keyboards, overhead mics on drums,
etc.).
Balance levels
Now you’re ready for the main task in mixdown—setting
levels for each channel and getting the optimum balance.
You may want to start with all faders at about 0 dB, and
work down from there. In other words, DECREASE the
level of backing instruments and backing vocals until they
blend well with the lead vocals and solo instruments. Start
loud and get softer—that’s better than engaging in an ever-
escalating battle of the faders.
Apply EQ—again (page 48)
Now that all instruments can be heard together, you may
need to redo some of your earlier EQ adjustments. EQ is
an effective way to clean up a mix and keep certain instru-
ments from clashing and muddying the sound. For exam-
ple, you may want to cut the bass of a keyboard to leave
more room for the bass guitar. On the other hand, you can
trim the high-end from the bass so that it doesn’t get in the
way of the drums and percussion. Also make sure that the
overall sound is tonally balanced— the low, mid, and high
bands of the audio spectrum should contain an equal
amount of sound energy.
44

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yamaha 01X bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yamaha 01X in de taal/talen: Engels als bijlage per email.

De handleiding is 3,56 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info