655217
8
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
8
Smart Hub 2.0 Mounting
The Smart Hub can be free standing, either vertically or
horizontally on a at surface with access to mains socket
and broadband internet router.
It is also suitable for wall mounting. Using the two holes on
the mounting back plate, mark the position of the holes.
Drill two holes and x with the screws and plugs provided.
Hook the Smart Hub onto the plate.
Check Accessories Range
Find a location where the device is to be mounted, see
section “Location Planning” for suggestions.
Before proceeding to mount the devices physically,
check that the Smart Hub will receive the system radio
transmissions by doing a simple radio range test.
Login to your Yale Home System App. Select
“Controller”, “Device List” then select “Walk Test”.
Hold the devices in the desired location and press the Test/
Learn button (see below) on the accessories.
• KEY PAD: Press button 8 + 9 together for 1 second.
• ALL OTHER DEVICES (Except for the SR-PC SR-PVC
& SR-PS): Hold the device in the desired location and
press the test button for 1 second, the Smart Hub should
respond with a chime.
For the SR-PC, SR-PVC & SR-PS hold the test button for
3 seconds.
If the sensor signal reached the Smart Hub, it will show up
on the last screen (see above).
The radio signal strength is shown by a number under the
device name. This number ranges from 1 to 9 (strongest).
Where possible please ensure devices show 3 or above for
optimal performance.
When you are happy that all your devices can
communicate with the Smart Hub, please proceed to
mounting the accessories
Mounting the PIR & PIR Image/
Video Camera
1. Open the PIR by loosening the bottom screw. Knock
out the relevant holes on the base where the plastic is
thinner. The center 2 knockout holes are for at wall
mounting while the 4 side holes are for corner mounting.
2. Drill holes into the wall using the knockout holes on the
base as a template.
3. Fit wall plugs and secure the PIR base with the screws
provided.
4. Fit the PIR back together and tighten bottom screw, the
PIR installation is complete.
Mounting the Key Pad
1. Knock out the xing holes. Drill holes into the wall using
the xing holes as a template.
2. Fit wall plugs into the wall and x back cover with the
screws provided. Fix front of the Key Pad onto the
back plate.
Mounting Devices
4
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yale SR310 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yale SR310 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,98 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info