674768
110
Verklein
Vergroot
Pagina terug
1/173
Pagina verder
110
Communicating with a Specific Remote Station
Using the Tone Squelch Function
Tips
The squelch type can be set for each frequency band on both A-band (Main) and B-band (Sub).
The CTCSS and DCS squelch settings are also active during scanning. If scanning is performed with
the CTCSS and DCS squelch function activated, scanning stops only when a signal containing the
specified CTCSS tone or DCS code is received.
Pressing the Monitor switch allows signals that do not contain a tone or DCS code, and signals with
different tones or DCS codes to all be heard.
Pressing and holding the
key for over one second to change the Set mode option allows you
to use this function more conveniently.
[SIGNALING][3 DCS INVERSION]: Allows you to receiving the DCS code of the inverted phase.
[SIGNALING] [10 SQL EXPANSION]: Allows specifying squelch types for transmit and receive
respectively.
Display Operation
OFF Deactivates transmit/ receive tone squelch function, etc.
TONE Activates CTCSS transmit tones ([TN] appears).
TONE SQL Activates the tone squelch receive function ([TSQ] appears).
DCS Activates the digital code squelch ([DCS] appears).
REV TONE
Activates the reverse tone ([RTN] appears).
Use to monitor communications based on the squelch control system in which
a tone signal is contained when communication is not performed and the tone
signal disappears when communication starts.
PR FREQ
Activates the no-communication squelch function for radios ([PR] appears).
You can specify no-communication signal tone frequencies within the range from
300 Hz to 3000 Hz in steps of 100 Hz.
PAGER (
see page
116)
Activates a new pager function ([PAG] appears).
When communicating via transceivers with your friends, specify personal codes
(each code is composed of two tones) so that you can call only specific stations.
D CD* Sends a DCS code only for transmission ([DC] appears).
TONE-DCS*
Sends a tone signal when transmitting, and waits for a DCS code when receiving
([T-D] appears).
D CD-TONE SQL*
Sends a DCS code when transmitting, and waits for a tone signal when receiving
([D-T] appears).
*: Press and hold the
key for over one second, then set [SIGNALING][10 SQL EXPANSION] to
ON. The setting options for D CD, TONE-DCS and D CD TONE SQL are added to the [SIGNALING] [11
SQL TYPE] in Set mode. This allows specifying the squelch types for transmit and receive respectively.
Setting the Tone Frequency
The tone frequency can be selected from 50 frequencies (from 67.0 Hz to 254.1 Hz).
1 Press and hold the key for over one second.
The transceiver enters Set mode.
2 Touch [SIGNALING].
3 Rotate the dial, then touch [12 TONE SQL FREQ].
110

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT2DR bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT2DR in de taal/talen: Engels als bijlage per email.

De handleiding is 40,87 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info