674745
136
Verklein
Vergroot
Pagina terug
1/154
Pagina verder
Page 134 FT-
991
OperaTing Manual
Menu MODe
107 SSB HCUT SLOPE
Function: Sets the slope of the high-frequency cutoff au-
dio lter in SSB mode.
Available Values: 6dB/oct / 18dB/oct
Default Setting: 6dB/oct
Description: Selects the slope setting of the high-fre-
quency cutoff audio lter in SSB mode.
108 SSB MIC SELECT
Function: Selects the microphone input jack for SSB
mode.
Available Values: MIC/REAR
Default Setting: MIC
Description: Selects the microphone input jack to be
used in SSB mode.
FRONT: Inputs from the
MIC
jack on the front
panel.
DATA: Disables the microphone circuit on the
front panel and inputs from the
USB
jack or
RTTY/DATA
jack on the rear
panel.
109 SSB OUT LEVEL
Function: Sets the level of the SSB receiving signal out-
put from the
RTTY/DATA
jack.
Available Values: 0 - 100
Default Setting: 50
110 SSB PTT SELECT
Function: Sets the PTT transmit control for the SSB sig-
nal.
Available Values: DAKY/RTS/DTR
Default Setting: DAKY
Description: Selects the PTT transmit control method for
the SSB signal.
DAKY: Controls the transmit signal from the
RTTY/DATA
jack
(
pin 3
)
on the rear
panel.
DTR: Controls the transmit signal from the USB
virtual COM/DTR ports.
RTS: Controls the transmit signal from the USB
virtual COM/RTS ports.
111 SSB PORT SELECT
Function: Sets the input jack of the SSB signal.
Available Values: DATA/USB
Default Setting: DATA
Description: Selects the input jack of the SSB signal
when
108 SSB MIC SELECT
is set to
DATA
”.
DATA: Inputs from the
RTTY/DATA
jack on the
rear panel.
USB: Inputs from the
USB
jack on the rear pan-
el.
112 SSB TX BPF
Function: Sets the frequency characteristics of the DSP
band-pass lter for transmitting in SSB mode.
Available Values: 100-3000/100-2900/200-2800/300-
2700/400-2600
Default Setting: 300-2700Hz
Description: Selects the frequency characteristics setting
of the DSP band-pass lter when transmit-
ting in SSB mode.
113 APF WIDTH
Function: Sets the bandwidth of the audio peak lter.
Available Values: NARROW/MEDIUM/WIDE
Default Setting: MEDIUM
Description: In CW mode the APF peak center fre-
quency is set according to the CW PITCH
frequency and the chosen APF bandwidth
value. In order to listen to the desired signal
comfortably, select one of the three band-
widths of the peak lter.
114 CONTOUR LEVEL
Function: Adjusts the GAIN of the CONTOUR circuit.
Available Values: −40 - 0 - 20
Default Setting: −15
Description: Sets level of the attenuation or the gain of
the CONTOUR circuit.
115 CONTOUR WIDTH
Function: Sets the bandwidth
(
“Q”
)
of the CONTOUR
circuit.
Available Values: 1 - 11
Default Setting: 10
Description: Sets the bandwidth
(
WIDTH
)
of the CON-
TOUR circuit.
116 IF NOTCH WIDTH
Function: Sets the attenuation bandwidth characteristic
of the DSP IF notch lter on the VFO-A.
Available Values: NARROW/WIDE
Default Setting: WIDE
Description: Selects the attenuation bandwidth charac-
teristic setting of the DSP IF notch lter to
NARROW
” or “
WIDE
”.
117 SCP DISPLAY MODE
Function: Sets the scope for either the spectrum or the
waterfall display.
Available Values: SPECTRUM/WATER FALL
Default Setting: SPECTRUM
Description: Selects the type of display when the scope
feature activates.
SPECTRUM: Enables the spectrum display.
WATER FALL: Enables the water-
fall display.
136

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Yaesu-FT-991A

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-991A bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-991A in de taal/talen: Engels als bijlage per email.

De handleiding is 36,17 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info