478504
71
Verklein
Vergroot
Pagina terug
1/132
Pagina verder
Page 69FT-950 OPERATING MANUAL
TRANSMITTER CONVENIENCE FEATURES
SPLIT-FREQUENCY OPERATION
A powerful capability of the FT-950 is its flexibility in Split Frequency operation using the VFO-A and VFO-B frequency
registers. This makes the FT-950 especially useful for high-level DX-peditions. The Split operation capability is very
advanced and easy to use.
1. Press the
[
VFO-B
(
RX
)]
Indicator/Switch, then rotate
the
[
CLAR/VFO-B
]
knob to set the desired VFO-B
frequency.
2. Press the
[
VFO-A
(
RX
)]
Indicator/Switch, then rotate
the Main Tuning Dial knob to set the desired VFO-A
frequency.
3. Now press the
[
SPLIT
]
button. The front panel Indi-
cator/Switch LEDs will look like this:
[
VFO-A
(
RX
)]
Indicator/Switch: “ON”
(LED glows Green)
[
VFO-A
(
TX
)]
Indicator/Switch: “OFF”
(LED Off)
[
VFO-B
(
RX
)]
Indicator/Switch: “OFF”
(LED Off)
[
VFO-B
(
TX
)]
Indicator/Switch: “ON”
(LED glows Red)
During Split operation, the VFO-A register will be used
for reception, while the VFO-B register will be used for
transmission. If you press the
[
SPLIT
]
button once more,
Split operation will be cancelled.
You may also press the
[
VFO-A
(
TX
)]
Indicator/Switch to
return transmit frequency control to the VFO-A register,
thereby canceling Split operation.
ADVICE:
During normal (non-split) VFO-A operation, you may
simply press the
[
VFO-B
(
TX
)]
Indicator/Switch (lo-
cated on the upper right of the
[
CLAR/VFO-B
]
knob)
to engage Split operation. The
[
VFO-B
(
TX
)]
Indica-
tor/Switch will glow Red when you press the
[
VFO-
B
(
TX
)]
Indicator/Switch.
During Split operation, pressing the
[
A
B
]
button will
reverse the contents of the VFO-A and VFO-B. Press
the
[
A
B
]
button once more to return to the original
frequency alignment.
During Split operation you may listen to the TX fre-
quency temporarily while pressing the
[
TXW
]
button
located on the bottom left of the Main Tuning Dial
knob.
It is possible to set different operating modes (for ex-
ample, LSB and USB) on the two VFOs used during
Split operation.
During Split operation it is also possible to set the VFO-
A and VFO-B to different Amateur bands if you use a
multi band antenna.
[
VFO-A
(
RX
)]
Button
[
VFO-B
(
RX
)]
Button
Quick Split Operation
The Quick Split feature allows you to set a one-touch off-
set of +5 kHz to be applied to your radio’s VFO-B (trans-
mit) frequency, compared to the VFO-A frequency.
1. Start with regular transceiver operation on the VFO-
A.
[
VFO-A
(
RX
)]
Indicator/Switch: “ON”
(LED glows Green)
[
VFO-A
(
TX
)]
Indicator/Switch: “ON”
(LED glows Red)
[
VFO-B
(
RX
)]
Indicator/Switch: “OFF”
(LED Off)
[
VFO-B
(
TX
)]
Indicator/Switch: “OFF”
(LED Off)
2. Press and hold in the
[
SPLIT
]
button for one second
to engage the Quick Split feature, and apply a frequency
5 kHz above the VFO-A frequency to the VFO-B fre-
quency register.
The VFO configuration will then be:
[
VFO-A
(
RX
)]
Indicator/Switch: “ON”
(LED glows Green)
[
VFO-A
(
TX
)]
Indicator/Switch: “OFF”
(LED Off)
[
VFO-B
(
RX
)]
Indicator/Switch: “OFF”
(LED Off)
[
VFO-B
(
TX
)]
Indicator/Switch: “ON”
(LED glows Red)
3. Press and hold in the
[
SPLIT
]
switch for two seconds
to increment the Sub (VFO-B) frequency another +5
kHz.
QUICK POINTS:
The operating mode applied to the VFO-B register will
be the same as that in use on the VFO-A register.
The offset of VFO-B from the VFO-A is programmed
via the Menu and is set to +5 kHz at the factory. How-
ever, other offsets may be selected using the following
procedure:
1. Press the
[
MENU
]
button to engage the Menu mode.
2. Rotate the
[
SELECT
]
knob to select Menu item “030
GENE Q SPLIT”.
ADVICE:
Press the
[
SELECT
]
knob momentarily to toggle the
Menu item display between “030 GENE” and “Q
SPLIT”.
3. Rotate the
[
CLAR/VFO-B
]
knob to select the desired
offset. The available selections are –20kHz ~ +20kHz
(factory default: +5 kHz).
4. Press and hold in the
[
MENU
]
button for one second
to save the new setting and exit to normal operation.
[
A
B
]
Button
[
VFO-B
(
TX
)]
Button
[
TXW
]
Button
[
SPLIT
]
Button
[
VFO-A
(
TX
)]
Button

[
CLAR/VFO-B
]
Knob
[
MENU
]
Button
[
SELECT
]
Knob
71

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Yaesu-FT-950

Zoeken resetten

  • Ft950 wil niet zenden met jtdx in ft8 ontvangt wel goed settings staan volgens Manuel ingesel, e weet raad? 73 PD4 PG Gesteld op 22-7-2024 om 22:04

    Reageer op deze vraag Misbruik melden
  • Bij het opstarten knippert TX. Ontvangst doet het, maar zenden niet. Wie heeft een oplossing? Gesteld op 15-4-2024 om 14:09

    Reageer op deze vraag Misbruik melden
  • Hoe sluit ik een digibox (MMSTV) aan op een FT950? Gebruikte voorheen een FT575GX2 . Deze had 3 tulpstekkertjes. Audio in audio uit en PTT ontvangst werkt goed en de zender schakelt ook in. Audio signaal klinkt niet zoals het hoort. Gesteld op 28-7-2023 om 19:00

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-950 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-950 in de taal/talen: Engels als bijlage per email.

De handleiding is 6,67 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info