478504
44
Verklein
Vergroot
Pagina terug
1/132
Pagina verder
Page 42 FT-950 OPERATING MANUAL
µ-TUNE FILTER
(
REQUIRES THE OPTIONAL RF µTUNING KIT
)
The RF µTuning Kit provides ultra-sharp RF selectivity for the front end of the transceiver. Very high Q is made possible
by the narrow-band design. Three RF µTuning Kits are available. The MTU-160 covers the 1.8 MHz band. The MTU-80/
40 covers the 3.5 and 7 MHz bands. The MTU-30/20 covers 10.1 and 14 MHz bands.
When any (or all) of the three optional units are connected, they will be automatically adjusted to center on your operating
frequency.
The narrow bandwidth is especially useful on the low bands, when many strong signals are being received via NVIS
propagation (Near Vertical-Incidence Signals) within a narrow bandwidth. The added protection for the RF stage is espe-
cially helpful in preventing IMD and blocking.
µ-Tune Operation
1. Press the
[
µ-TUNE
]
button to activate the µ-Tune fil-
ter. The LED inside the
[
µ-TUNE
]
button glows or-
ange. The
[
SELECT
]
knob works as the µ-TUNING
knob.
ADVICE:
The tuning position of the µ-Tune filter will appear
in the Tuning Offset Indicator on the display for
three seconds, and the “ ” icon will be indi-
cated in the FLT column of the Block Diagram Dis-
play on the display.
INTERFERENCE REJECTION
[
µ-TUNE
]
Button
[
SELECT
]
Knob
Tuning Offset Indicator
[
CLEAR
]
Button
BLOCK DIAGRAM DISPLAY
The µ-Tune circuit will automatically align itself
onto your operating frequency.
Remember that µ-Tune only operates on the 14
MHz and lower bands.
2. Rotate the
[
SELECT
]
knob to peak the response (back-
ground noise) or reduce interference.
ADVICE:
You may observe the relative peak point of the µ-
Tune filter in the Tuning Offset Indicator on the
display, while tuning the
[
SELECT
]
knob.
The amount of change in the center frequency of
the µ-Tune filter, when rotating the
[
SELECT
]
knob by one click, can be configured using Menu
item “032 GENE µT DIAL”.
If you have performed manual adjustment of the µ-
Tune filter center frequency, you may press the
[
CLEAR
]
button to re-center the filter response on
your current operating frequency.
3. Press the
[
µ-TUNE
]
button (or
[
SELECT
]
knob)
momentarily to disengage the µ-Tune filter; the “
icon will be changed to “ ” in the FLT column of
the Block Diagram Display on the display. In this mode,
only the fixed bandpass filter for the current band will
be engaged.
ADVICE:
Alternate presses of the
[
µ-TUNE
]
button or the
[
SE-
LECT
]
knob, will switch the µ-Tune filter between on
or off.
TUNING OFFSET INDICATOR
Block Diagram Display
ADVICE:
The µ-Tune Filter selection will be memorized inde-
pendently on each VFO stack of the VFO-A and VFO-
B.
You may change the indication of the Tuning Offset
Indicator to display the center frequency of the µ-Tune
filter continuously while the µ-Tune filter is activated.
This is Menu item “006 DISP BARSEL”. See Box on
the next page for details of the setting.
QUICK NOTE:
The permeability-tuning concept utilized in the µ-Tune cir-
cuit dates back many decades, as it was incorporated in
such classic transceivers as the FT-101, the FT-901 se-
ries, the FTDX400, and similar models. The µ-Tuning Kit
uses the same circuit as our flag ship model the FTDX9000,
which is the highest development of this circuit concept
ever employed in an Amateur transceiver.
44

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Yaesu-FT-950

Zoeken resetten

  • Ft950 wil niet zenden met jtdx in ft8 ontvangt wel goed settings staan volgens Manuel ingesel, e weet raad? 73 PD4 PG Gesteld op 22-7-2024 om 22:04

    Reageer op deze vraag Misbruik melden
  • Bij het opstarten knippert TX. Ontvangst doet het, maar zenden niet. Wie heeft een oplossing? Gesteld op 15-4-2024 om 14:09

    Reageer op deze vraag Misbruik melden
  • Hoe sluit ik een digibox (MMSTV) aan op een FT950? Gebruikte voorheen een FT575GX2 . Deze had 3 tulpstekkertjes. Audio in audio uit en PTT ontvangst werkt goed en de zender schakelt ook in. Audio signaal klinkt niet zoals het hoort. Gesteld op 28-7-2023 om 19:00

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-950 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-950 in de taal/talen: Engels als bijlage per email.

De handleiding is 6,67 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info