478504
41
Verklein
Vergroot
Pagina terug
1/132
Pagina verder
Page 39FT-950 OPERATING MANUAL
MORE FREQUENCY NAVIGATION TECHNIQUES
Keyboard Frequency Entry
You may enter operating frequencies directly into the cur-
rent VFO, using the front panel
[
BAND
]
key buttons.
Example: Enter 14.250.00 MHz
1. Press the
[
ENT
]
button to
engage the direct frequency
entry process. Now, begin-
ning with the first digit of
the frequency (the leftmost
digit), we will enter the required digits of the frequency.
2. Press, in order, the digits of the operating frequency,
using the
[
BAND
]
buttons (the frequency entry digit
or decimal point is printed on the right side of the but-
tons). In this example, enter
[
1.8
(
1
)]
[
10
(
4
)]
[
GEN
(
.
)]
[
3.5
(
2
)]
[
14
(
5
)]
[
50
(
0
)]
[
50
(
0
)]
[
50
(
0
)]
[
50
(
0
)]
The decimal point after the “MHz” portion of the fre-
quency must be entered, but no decimal point is re-
quired after the “kHz” portion.
3. Press the
[
ENT
]
button once more. A short “beep” will
confirm that the frequency entry was successful, and
the new operating frequency will appear on the dis-
play.
ADVICE:
If you attempt to enter a frequency outside the operat-
ing range of 30 kHz ~ 56 MHz, the microprocessor
will ignore the attempt, and you will be returned to
your previous operating frequency. If this happens,
please try again, taking care not to repeat the error in
the frequency entry process.
Using the
[
CLAR/VFO-B
]
knob
You may change the current VFO frequency in 1 MHz
steps. Press the
[
MHz
]
button
located at the bottom and left
of the
[
CLAR/VFO-B
]
knob.
The 1 MHz steps will be ap-
plied to the current VFO fre-
quency. The imbedded LED
in the
[
MHz
]
button will glow
orange in the latter case.
When tuning in 1 MHz steps,
clockwise rotation of the
[
CLAR/VFO-B
]
knob will increase the frequency, while
counter-clockwise rotation will decrease the frequency.
Using the
[
UP
]
/
[
DWN
]
buttons of the
supplied MH-31B8 Hand Microphone
The
[
UP
]
/
[
DWN
]
buttons on the
supplied MH-31
B8 Hand Micro-
phone may also be used to
manually scan the frequency up-
ward or downward.
The microphone’s
[
UP
]
/
[
DWN
]
buttons utilize the tuning steps of
the Main Tuning Dial knob. When
the microphone’s
[
FST
]
button is
pressed, the tuning rate increases by a
factor of ten, in a manner similar to the
transceiver front panel
[
FST
]
button.
ADVICE:
You may independently set the tuning
steps of the
[
UP
]
/
[
DWN
]
buttons in the AM and FM
modes. To set new tuning steps, use Menu items “087
TUN AM STEP” and “088 TUN FM STEP”.
CONVENIENCE FEATURES
DYNAMIC MICROPHONE
MH-31
DWN FST UP
[
DWN
]
Button
[
FST
]
Button
[
UP
]
Button
41

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Yaesu-FT-950

Zoeken resetten

  • Ft950 wil niet zenden met jtdx in ft8 ontvangt wel goed settings staan volgens Manuel ingesel, e weet raad? 73 PD4 PG Gesteld op 22-7-2024 om 22:04

    Reageer op deze vraag Misbruik melden
  • Bij het opstarten knippert TX. Ontvangst doet het, maar zenden niet. Wie heeft een oplossing? Gesteld op 15-4-2024 om 14:09

    Reageer op deze vraag Misbruik melden
  • Hoe sluit ik een digibox (MMSTV) aan op een FT950? Gebruikte voorheen een FT575GX2 . Deze had 3 tulpstekkertjes. Audio in audio uit en PTT ontvangst werkt goed en de zender schakelt ook in. Audio signaal klinkt niet zoals het hoort. Gesteld op 28-7-2023 om 19:00

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-950 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-950 in de taal/talen: Engels als bijlage per email.

De handleiding is 6,67 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info