478504
26
Verklein
Vergroot
Pagina terug
1/132
Pagina verder
Page 24 FT-950 OPERATING MANUAL
PROC
This indicator appears whenever the DSP Speech Pro-
cessor is activated.
MONI
This indicator appears whenever the transmit monitor
circuit is activated.
KEYER
This indicator appears whenever the internal CW keyer
is activated.
BK-IN
This indicator appears whenever CW break-in opera-
tion is activated.
NB
This indicator appears when the receivers “short-du-
ration” Noise Blanker is activated.
This indicator will blink for three seconds, and there-
after appears continuously, when the receiver’s “longer
pulse” Noise Blanker is activated.
NAR
This indicator appears whenever the receivers narrow
IF DSP filter is engaged.
S/PO
On receive, this indicates the received signal strength,
from S-0 to S-9+60dB on receiving.
On transmit, it indicates the RF Power Output, from 0
to 150 Watts on transmit.
ADVICE:
The S and PO meters can be set to the Peak-hold func-
tion via the Menu items “007 DISP PKH S” and “008
DISP PKH PO”.
Multi Function Meter
The five Transmit Multi-Meter functions are listed be-
low.
DISPLAY INDICATIONS
(
LEFT SIDE
)
Indicates the relative ALC voltage.
Indicates the Standing Wave Ratio
(Forward: Reflected), from 1.0 to 3.0.
Indicates the final amplifier drain current,
0 to 30 ampere.
Indicates the final amplifier drain voltage
(nominal value: 13.8 V).
Indicates the speech compressor level,
from 0 to 30 dB.
ALC
SWR
ID
VDD
COMP
The function displayed is selected by repeatedly press-
ing the
[
METER
]
switch, to step through the available
meter displays. (ALC
SWR
ID
VDD
COMP
ALC
....
)
ADVICE:
The ALC and ID meters can be set to the Peak-hold
function via the Menu items “009 DISP PKH ALC
and “010 DISP PKH ID”.
TUNER
This indicator appears when the internal Automatic An-
tenna Tuner is activated.
HI-SWR
This indicator appears if the directional coupler and
microprocessor detect an abnormally high SWR con-
dition (over 3.0:1) that cannot be resolved by the Au-
tomatic Antenna Tuner.
NOTE:
If this indicator appears, check to be sure that you have
the correct antenna selected for the current operating
band. Also check the condition of the antenna, the co-
axial cable, and/or the connectors on the cable, to lo-
cate and correct the fault.
MIC EQ
This indicator appears whenever the Three-Band Para-
metric Microphone Equalizer is activated via the Menu.
REC
This indicator appears while the optional Voice
Memory Unit is recording your voice message, or the
Contest Keyer is recording your CW keying.
PLAY
This indicator appears while the optional Voice
Memory Unit is playing back the recorded voice mes-
sage, or the recorded Contest CW keying.
26

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Yaesu-FT-950

Zoeken resetten

  • Ft950 wil niet zenden met jtdx in ft8 ontvangt wel goed settings staan volgens Manuel ingesel, e weet raad? 73 PD4 PG Gesteld op 22-7-2024 om 22:04

    Reageer op deze vraag Misbruik melden
  • Bij het opstarten knippert TX. Ontvangst doet het, maar zenden niet. Wie heeft een oplossing? Gesteld op 15-4-2024 om 14:09

    Reageer op deze vraag Misbruik melden
  • Hoe sluit ik een digibox (MMSTV) aan op een FT950? Gebruikte voorheen een FT575GX2 . Deze had 3 tulpstekkertjes. Audio in audio uit en PTT ontvangst werkt goed en de zender schakelt ook in. Audio signaal klinkt niet zoals het hoort. Gesteld op 28-7-2023 om 19:00

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-950 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-950 in de taal/talen: Engels als bijlage per email.

De handleiding is 6,67 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info