478504
23
Verklein
Vergroot
Pagina terug
1/132
Pagina verder
Page 21FT-950 OPERATING MANUAL
FRONT PANEL CONTROLS & SWITCHES
[
TXW
] (
TX Watch
)
Switch
Pressing this button lets you monitor the transmit fre-
quency when split frequency operation is engaged.
Release the button to return to normal split frequency
operation.
[
C.S
]
Switch
Press this button momentarily to directly recall a fa-
vorite Menu Selection.
To program a Menu selection to the
[
C.S
]
button: press
the
[
MENU
]
button to enter the Menu. Select the Menu
item you want to set as the short cut. Then press and
hold in the
[
C.S
]
button for one second; this will lock
in the selected Menu item as the short cut.
[
MENU
]
Switch
This button is used to access the Menu system. The
various transceiver characteristics may be configured.
Menu operation is described in detail, in this manual,
beginning on page 104.
IMPORTANT NOTE:
Pressing this button momentarily, activates the Menu.
The Menu items will appear on the display; once you
have changed the parameters, you must press and hold
in the
[
MENU
]
button for one second to save any con-
figuration changes (momentarily pressing the
[
MENU
]
button to exit will not save the changes).
Main Tuning Dial Knob
This large knob adjusts the operating frequency of the
VFO-A or a recalled memory. Clockwise rotation of
this knob increases the frequency. Default tuning in-
crements are 10 Hz (100 Hz in AM and FM modes);
when the
[
FAST
]
button is pressed, the tuning steps
increase. The available steps are:
ADVICE:
The tuning steps for the Main Tuning Dial knob are
set, at the factory, to 10 Hz per step. Via Menu item
084 TUN DIALSTP”, however, you may change this
setting from 10 Hz to 1 or 5 Hz instead.
[(
VFO-A
)
TX
]
Indicator/Switch
When this button is pushed, the LED inside the button
will glow red; and, when the PTT switch is pressed,
the transceiver will transmit on the VFO-A frequency
(subject to any Clarifier offset, of course).
ADVICE:
If this indicator is not illuminated, it means the
[(
VFO-
B
)
TX
]
Indicator/Switch has been selected (it will be
glowing red). In this case, transmission will be on the
frequency and mode programmed for VFO-B.
OPERATING MODE
LSB/USB/CW/RTTY/PKT
(
LSB
)
AM/FM/PKT
(
FM
)
Numbers in parentheses indicate steps when the
[
FAST
]
button is On.
1 STEP
10 Hz
(
100 Hz
)
100 Hz
(
1 kHz
)
1 DIAL ROTATION
10 kHz
(
100 kHz
)
100 kHz
(
1 MHz
)
[
FAST
]
Switch
Pressing this button will change the tuning rate of the
Main Tuning Dial knob (VFO-A) or the VFO-B Tun-
ing Knob
([
CLAR/VFO-B
]
knob
)
to 100 Hz/step.
When this function is activated, the “ ” icon ap-
pears in the display.
ADVICE:
This switch affects VFO-A and VFO-B independently.
[
LOCK
]
Switch
This button toggles locking on/off for the Main Tun-
ing Dial knob (VFO-A) or the VFO-B Tuning Knob
([
CLAR/VFO-B
]
knob
)
. With “Lcok” on, the Main
Tuning Dial knob or
[
CLAR/VFO-B
]
knob can still
be turned, but the frequency will not change, and the
” icon appears in the display.
ADVICE:
This switch locks VFO-A and VFO-B independently.
[
A
B
]
Switch
Press this button momentarily to transfer the frequency
or memory channel data, from VFO-A to VFO-B, over-
writing any previous contents in VFO-B. Use this key
to set both VFO-A and VFO-B to the same frequency
and mode.
[
A
B
]
Switch
Pressing this button momentarily, exchanges the fre-
quency or memory channel data, of VFO-A and VFO-B.
[
V/M
]
Switch
This button toggles frequency control between VFO-
A and the memory system. In memory mode, either
” or “ ” icon will be shown under the frequency
Display field to indicate the current selection. If you
have tuned the frequency off the Memory channel, the
” icon will be displayed. Pressing the
[
V/M
]
but-
ton returns the display to the original memory fre-
quency, and the “ ” icon will again be displayed.
Pressing it once more returns frequency operation to
the VFO-A, and the icon will no longer be displayed.
[
M
A
]
Switch
Pressing this button momentarily, will display the con-
tents of the currently-selected memory channel for 10
seconds.
Holding
[
M
A
]
button in for one second copies the
data from the selected memory to VFO-A, and two
beeps sound. Previous data in VFO-A will be over-
written.
[
A
M
]
Switch
Pressing this button momentarily, displays the contents
of the currently-selected memory channel for 10 seconds.
Pressing and holding in this key for one second (until
the double beep) copies the current operating data into
the currently selected memory channel, overwriting any
previous data stored there.
23

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Yaesu-FT-950

Zoeken resetten

  • Ft950 wil niet zenden met jtdx in ft8 ontvangt wel goed settings staan volgens Manuel ingesel, e weet raad? 73 PD4 PG Gesteld op 22-7-2024 om 22:04

    Reageer op deze vraag Misbruik melden
  • Bij het opstarten knippert TX. Ontvangst doet het, maar zenden niet. Wie heeft een oplossing? Gesteld op 15-4-2024 om 14:09

    Reageer op deze vraag Misbruik melden
  • Hoe sluit ik een digibox (MMSTV) aan op een FT950? Gebruikte voorheen een FT575GX2 . Deze had 3 tulpstekkertjes. Audio in audio uit en PTT ontvangst werkt goed en de zender schakelt ook in. Audio signaal klinkt niet zoals het hoort. Gesteld op 28-7-2023 om 19:00

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-950 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-950 in de taal/talen: Engels als bijlage per email.

De handleiding is 6,67 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info