574682
35
Verklein
Vergroot
Pagina terug
1/68
Pagina verder
Page 35
Camera Setting Options
[Brightness] The image brightness can be adjusted in the range 0-100, where a higher value produces a brighter image.
[Contrast] The image contrast can be adjusted in the range 1-5, where a higher value produces more difference in
brightness between adjacent areas.
[Hue] The image hue can be adjusted in the range 0-100, where a higher value produces more stimulus on the image.
[Saturation] The image saturation can be adjusted in the range 0-100, where a higher value produces more neutral
image.
[Mirror] Displays a mirrored view of the video.
[Flip] Display video upside down useful if you have installed the camera upside down.
[Enable white balance] Enable or disable white balance
[White balance mode]
This is used to compensate for the different colours present in different light sources, to make the
colours in the image appear in the same colour temperature. The Network Camera can be set to automatically identify the
light source and compensate for its colour. Alternatively, the type of light source can be manually selected from the drop-
down list.
[AE Mode]
The auto-exposure sense area for entire camera image can be set according to needs to configuration from the
drop-down list.
[Exposure]
Two options: 50Hz & 60Hz. This should be set according to the mains frequency of the country the camera is
being used in. For UK this would be 50Hz. For the USA this would be 60Khz.
[Max Exposure time]
Select the exposure time for the camera for the duration of the time that gets into the sensor. The
exposure time can be adjusted in the range 1/25 1/10000.
[Max Gain]
Select the level gain control for the camera. Max Gain can be adjusted in the range 0-100.
[Gamma] Configuration grayscale depth degree.
[WDR] Enable or disable Wide Dynamic Range
[ICR] IR is present naturally in day light, this can cause discolouration of images where the greens can look purplish. The
IR cut filter blocks these IR lights from coming back onto the lens of camera, and this gives a true day image.
However, if the IR cut filter is on during night, the night vision will not work. It is recommended to leave the IR cut filter
control to Auto Light Sensor at all times, to achieve best results from the camera.
[B/W Mode] By IR Type” switches the video from colour to monochrome when the IR LEDs are turned on. “B/W
switches the video to monochrome irrelevant of the status of the IR LEDs. “Colour” forces the Y-cam to stay in colour
mode even when the IR LEDs are on.
35

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Y-cam Bullet HD 1080 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Y-cam Bullet HD 1080 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,23 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info