571989
1
Verklein
Vergroot
Pagina terug
1/6
Pagina verder
(A) Safety Instructions
This product should not be disposed with other house hold wastes at the end of
its working life.Please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources. This will help
prevent harm to the environment or human health from uncontrolled waste disposal.
This product operates only in the range of AC 100V~250V and 50Hz/60Hz.
Please check first your power supply to see if it fits this range.
Please be noted that you need to disconnect from the mains before you start any
maintenance or installation procedures.
Make sure that the power cord is placed in a position where it is easy to unplug it from
the mains in an emergency.
Do not overload a wall outlet, extension cord or adapter as this may cause electrical
fire or shock.
This product is not water-proof and should not be exposed to dripping, splashing,
or any type of liquid.
No objects filled with liquid such as base shall be placed on the product.
Please do not clean the product with wet cloth, which may cause a short circuit.
No wet objects should be placed near the product.
Disconnect the power of the product before you connect the satellite cable
to the product. Otherwise, it may cause damage to the LNB.
The LNB must be earthed to the system earth for the satellite dish.
Unplug the product and disconnect the antenna cable during a thunderstorm
or lightening, especially when left unattended and unused for a long period of time.
This will prevent possible damages from power surges or lightening
Place the product indoor.
Do not expose the product to rain, sun or lightening.
Do not place the product near any heat appliances as a radiator.
Ensure that there is more than 10 cm distance from any electrical devices & wall.
02
Xtrend ET4000
(B) Packaging Contents
Please check all package contents before using your product.
ET4000
Remote Control
Batteries
HDMI cable (Optional)
A/C Adaptor
Power Code
User Manual
03
Xtrend ET4000
(C) Product Descriptions
Buttons : Standby/Channel+/Channel-
USB : Connects to the USB memory stick or external HDD
Smartcard reader slot : Two Smartcard slots are provided
Front Panel
04
Xtrend ET4000
1
2
3
05
Xtrend ET4000
LNB-IN : One satellite cable can be connected.
HDMI : Connects to TV using a HDMI cable for both audio and video signals.
Ethernet : Connects the PC or another set top box of ET4000.
USB : Connects the USB memory stick or external HDD.
S/PDIF : Connects to a digital audio system using S/PDIF cable.
Video output : Connects to TV using RCA cable
Audio output : Connects to TV using RCA cable.
DC-IN: Connects the detachable D/C power adapter.
On : Control power on and off.
Rear Panel
7
TV SCART : Connects to TV using aSCART cable for both audio and video signals.
3
8
10
9
6
4
5
2
1
(D) Remote Control
Power : To switch the receiver in and out of stand-by mode.
Numeric Keys : Enters a service number for service change or
to specify values for menu options.
< : Navigates left on the menu options.
> : Navigates right on the menu options.
Color Keys : Each key is assigned a specific function that may be
different in each menu.
• Red - mainly used for REC, Cancel, etc.
• Green - mainly used for OK
Yellow
• Blue
GUIDE : Displays the Electronic Program Guide (EPG) information
if provided.
MENU : Displays the main menu.
Information : Displays the service information box.
It is also used to display more information about a
program.
EXIT : Exits the current menu option into the live mode, or switches
one step back of the menu.
OK : Confirms the selected menu option.
Navigation Keys : Navigates Up/Down and Left/Right on the menu
options. Up/down keys are used to call up the
channel list.
Mute : Mutes the audio.
VOL +/- : Adjusts the audio volume.
P +/- : Navigates through the scanned channel list
Playlist : Displays channel list during viewing mode.
Filelist : Displays the list of recordings stored on the internal HDD if any.
06
Xtrend ET4000
1
3
4
5
17
6
8
7
9
10
11
2
12
13
14
15
Portal : Display the list of TV portal service.
16
1
5
13
9
11
15
17
7
2
3
4
8
6
10
14
16
12
07
Xtrend ET4000
ll : Play and Pause
<< : Fast Rewind
Fast rewinds at up to 128 times faster than the normal speed
(x2/4/8/16/32/64/128)
>> : Fast Forward
Fast forwards at up to 128 times faster than the normal speed
(x2/4/8/16/32/64/128)
Recording : Displays the recording menu.
(ET4000 does not support this function)
Radio : : Displays the Radio channel list.
Stop : Stops playing and goes to the live mode.
Timer : Sets sleep timer
TEXT : Displays the Teletext information of the current channel,
if the channel provides Teletext data.
Subtitle : Displays the subtitle of the current channel
if the channel provides subtitle.
18
21
22
19
29
23
20
24
TV : Displays the TV channel list.
25
Audio : Displays the audio track option to choose
(e.g. AC3, Stereo).
27
Help : Displays major important operation methods of STB.
This provides users with a quick guide using of STB.
28
26
19
21
24
25
18
20
22
23
27
29
28
26
(E) Main Features
800 DMIPS Processor
Linux Operating System
Media Player
Downloadable Plug-ins supported
2 x Smartcard Readers
MPEG2/H.264 Hardware Decoding
1 x DVB-S2 Tuner
Status Indicator
128MB NAND Flash/256MB*2 DDR Memory
10/100MB Ethernet Interface
2 x USB 2.0
RS-232
HDMI
S/PDIF for digital bit stream out
Automatic & Manual Service Scan supported
Multiple LNB control (DiSEqC) supported
Skin change supported
Power Supply by External SMPS and power switch
OSD 3D
RCA
Sleep timer
Composite VideoRGB
Quick and easy installation & user-friendly menu
Automatic and manual channel scan options
Low power consumption
08
Xtrend ET4000
(F) Installation of Xtrend-ET4000
1. Connecting Satellite Cables
ET4000 is integrated with one satellite tuner, and one of the first steps is to connect
satellite cable to ET4000 in order to gain optimal signal quality.
A. Connecting Satellite Cable
Connect satellite cable to LNB-IN.
This chapter will guide you through the whole installation process of ET4000.
Please read each section carefully to make sure that the system runs properly.
09
Xtrend ET4000
10
Xtrend ET4000
2. Connecting the TV
ET4000 provides a variety of audio/video connection methods.
A. Connecting TV via HDMI Cable
For the sake of the best picture quality, especially for digital TV, HDMI connection is
recommended. Most HDTVs have HDMI connectors to ensure the highest picture quality.
In the rear panel of STB one HDMI connector is available for this purpose. Connect your
TV to STB using a HDMI cable as follows.
11
Xtrend ET4000
B. Connecting TV via RCA (Video) Cable
STB provides Composite video connection as well. Composite cable has normally three
connectors at the both end; one Video (Yellow) and two Audio (White/Red). Connect your
TV to STB as follows:
12
Xtrend ET4000
3. Power ON/OFF
[ : Press or Press ‘Standby/Reset’]
There are several ways to turn your STB ON or OFF
Complete Power Shutdown
There is a Power Switch in the rear panel and once it is ON, you do not need to turn it on or
off each time.
It takes a longer time to boot the system if you turned it off by this switch.
Standby Mode
POWER key is normally used to turn the power of STB on or off. If you press POWER,
it instantly switches your STB off or on.
In this mode, the system is not completely shutdown and thus it takes a shorter time to
turn it on and off.
Deep Standby Mode
Deep Standby is used to reduce the standby power consumption.
STB is designed to be energy efficient and to guarantee the power consumption to be under
1W in the deep standby mode.
i
Menu
For ET4000
Before Operation, Please read entire Manual thoroughly and retain for future reference.
1

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Xtrend-ET4000

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Xtrend ET4000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Xtrend ET4000 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,35 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Xtrend ET4000

Xtrend ET4000 Snelstart handleiding - Deutsch - 1 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info