the unit in your vehicle.
WARNING! Please read the following manual carefully before you install the unit.
Damages caused due to an inappropriate installation will not be covered by warranty.
If you do not want to risk your warranty entitlement, please let the technician install the unit in
your vehicle.
To avoid a short circuit please disconnect the vehicle battery before the installation. To do it
properly please read the manual of your vehicle.
Make sure that your vehicle is equipped with a car radio slot of required size (1 or 2DIN)
As may be the case you will need a suitable faceplate, adapter or other accessories. These could be
provided from your local specialist supplier.
The connection cables may not be cutted or short-circuited. Otherwise the warranty becomes
invalid.
Before the installation please make sure that your vehicle has the 12 Volt on-board power supply.
The minus (-) should be connected with the ground (GND) (negative).
Please tag the polarity of the available speakers before you disconnect the vehicle battery.
A proper grounding of the unit's housing requires a clean ground connection. Thus the grounding
area should be rust-, stain- and dust-free.
Please ground the cable separately from other heavy current devices such as an amplifier etc.
Please ensure that the colored cables are connected according to the wiring diagram. The wrong
wiring may lead to malfunctions or even damages of the electric elements of the vehicle.
Please note that the connection cables of this unit and of the other devices may have the same
purpose but the different color. For this reason while connecting this unit with the other devices
please ensure that both of the cables in each case have the same purpose. To connect everything
correctly please refer to the manuals of the both devices.
Please ensure that the negative speaker cable is in each case connected with the negative speaker
terminal of the ISO port. Do not ever connect the negative speaker cables with the vehicle body.
This unit is designed and construed for connection with 4 speakers. Do not combine this unit with
devices that are designed and construed for connection with 2 speakers.
The speakers should feature the impedance of 4-8 Ohm and a sufficient wattage.
Please ensure that the speakers you are connecting with the unit are intact. Damaged speakers can
impair the unit.
To avoid a short circuit please isolate all cable junctions and endings of the unused cables with the
