644396
10
Verklein
Vergroot
Pagina terug
1/34
Pagina verder
User manual
ENGLISH
XM-2VRSU734BT
XOMAX
2
XM-2VRSU734BT
XOMAX
Thank you for purchasing one of our XOMAX products! We appreciate your
condence. Enjoy your brand new multimedia unit!
Please read the following manual carefully before you install and use the unit.
Please save this manual in case you will need to clarify further possible ques-
tions regarding installation and usage of our product.
We are constantly trying to keep our online-library of user's manuals for our
products up-to-date. In case you miss some information or if something should
be unclear, please visit our homepage www.xomax.de for a current version of
user's manual or contact our customer service.
i
Version 1.0
Last update 28.01.2016
Manual's version
We appreciate our environment, so to keep it safe and clean, we
do not print our manuals on paper but provide our products with
manuals in digital version created in *.pdf format.
You can nd and download them anytime on our homepage www.
xomax.de, view them on your mobile devices and print them for
yourself if needed.
Please note: Any alternations and changes of technical data or/and design
due to technical update of some models need no advertisement.
XOMAX
XM-2VRSU734BT
3
XM-2VRSU734BT
XOMAX
EN
Thema:
List of contents
List of contents
List of contents 3
Safety instructions and
precautions 4
Specications 6
Package content 7
Installation 8
Installation notes ............................ 8
Before the installation ..................... 8
Panel introduction 10
Remote control function 12
Connection schedule – Cinch
multicore 14
ISO cable connections 15
Connection schedule – ISO
plug 16
ISO plug conguration 17
Socket A (power supply) .................17
Socket B (loud speakers) ................17
ISO cable connections 18
ISO cable .....................................18
Please note ...................................18
Startup operations 19
Usage of the remote control ............19
Replacement of the battery .............19
Unit on/off ....................................20
Insert a micro SD card ...................20
Insert a USB ash drive ..................20
External input operation 20
Instructions 21
Entering the main interface .............21
Radio function operation .................21
EQ setting ....................................21
Turn on/off the Long/Short-range ....22
Loudness on/off ............................22
Stereo on/off ................................22
PTY (Programme Type) ...................22
TA (Receive trafc information) .......22
AF (Alternative Frequency) .............22
Band switching ..............................22
Search/Store/Scan stations .............22
Multimedia function 23
SD/USB storage device...................23
Music playing ................................23
Image playing ...............................24
Video playing ................................24
Bluetooth function operation 25
4
XM-2VRSU734BT
XOMAX
EN
Thema:
List of contents
Enter/exit .....................................25
Pair/link .......................................25
Dialing .........................................25
Call records ..................................25
Phonebook ...................................26
Pairing records ..............................26
Incoming call displaying .................26
Bluetooth music ............................27
Steering wheel setting 27
Calendar setting 27
Setup 28
General setting..............................28
Language setting ...........................28
Audio setting ................................28
Video setting.................................29
Touch calibration ...........................29
Rear view camera (optional) 30
Common information .....................30
Connection ...................................30
Start the rear view camera mode .....30
Common solutions 31
Recycling of an old unit 33
Recycling of the battery 33
5
XM-2VRSU734BT
XOMAX
EN
Thema:
Safety instructions and precautions
Safety instructions and
precautions
!
Handling by stop only
To avoid any accidents please don't
handle the unit while you driving.
Please stop and park the vehicle
at safety place and handle the unit
casually.
!
Installation
Please read the following manual
carefully before you install the
unit. We recommend you to let the
technician install the unit in your
vehicle.
!
Regular loudness
Please set the loudness of the unit
to the appropriate level so you were
still able to hear exterior noises
especially trafc warning signals.
Furthermore the higher loudness
level can damage your hearing
organs.
!
Repair of the unit
Do not open the unit. Do not try to
repair the unit by yourself due to
any emerging technical problems.
While opening the unit by yourself
exists the danger to be electrocuted.
Do not use the unit any further since
you detect any kind of technical
problems. Leave all the repair opera-
tions to professional technicians.
Due to awed warranty seal the
warranty becomes invalid.
!
Power supply
Use the unit connected only to 12 Volt
on-board power supply. The minus (-)
should be connected with the ground
(GND) (negative).
Due to the wrong grounding exists the
danger of re. In case of doubt please
consult with professional technicians.
!
Replacement of fuses
While replacing the fuse please make
sure that the new fuse has the same
properties as the old one, especially the
amperage.
!
Overheating
Do not occlude the vent holes to avoid
the heat generation and accumulation
in the unit. Otherwise exists the danger
of re.
!
Regular temperature
Please make sure that the temperature
inside the vehicle amounts to not more
than +60 C. If it's too hot inside the
vehicle, do not turn the unit on until
the inside temperature of the cabin
descends.
!
6
XM-2VRSU734BT
XOMAX
EN
Thema:
Safety instructions and precautions
!
Cleaning of the unit
Please keep the unit clean and remove
the dust from it regularly. Please use for
that a soft and dry cleaning rag.
Major soilings can be removed carefully
with the wet cleaning rag. Do not use
any chemical or alcohol-containing
detergents to avoid the damage of the
unit's varnish.
!
Handling the touchscreen
Do not press the touch keys or other
symbols too hard – it may lead to image
distortions, unit malfunctions and
touchscreen damages.
Do not use any sharp articles to use
the touchscreen. Please handle the
touchscreen with your nger or with the
appropriate stylus.
!
Moisture
To avoid the danger of re or the
electric shock do not put the unit in to
the moist environment (e.g. adverse
weather conditions, inappropriate wet
cleaning etc.)
7
XM-2VRSU734BT
XOMAX
EN
Thema:
Specifications
Specifications
Common data
Operating voltage ............................ 12V DC
Fuse ................................................... 15 A
Instalation size .............. 2DIN - (Double DIN)
Audio
Output power ............................. 4x 60 Watt
Loudspeaker impedance ............. 4 bis 8 Ohm
Frequency range ................... 20 Hz - 20 KHz
Display
Diagonal ....................... 6,2 Zoll (ca. 16 cm)
Resolution ........................... 800 x 480 Pixel
Aspect ratio (image) ............... 16:9 standard
Typ .................. TFT LCD Touchscreen Display
FM-tuner
Frequency range .................. 87.5 - 108 MHz
FM sensibility ..................................... 10 dB
S/N ratio .......................................... 60 dB
IF frequency .................................. 10.7 MHz
Stereo channel separation ........ 30 dB (1kHz)
AM-Radioempfänger
Frequency range .................. 522 - 1620 KHz
AM sensibility ..................................... 32 dB
IF frequency ................................... 465 KHz
USB1-port (front)
Plug type ................................... Typ A, USB
Max. supported volume ..................... 128 GB
File system ......................................... Fat32
USB2-port (back)
Plug type ................................... Typ A, USB
Max. supported volume ..................... 128 GB
File system ........................................ Fat32
SD-card slot
Slot typ ....... MicroSD, MicroSDHC, MicroSDXC
Max. supported volume ..................... 128 GB
File system ........................................ Fat32
Bluetooth
Version ..................................... 2.0 Class 2
Prole ............................ Freisprechen, A2DP
Frequency ........................ 2.4GHz Spektrum
Any alternations and changes of
technical data or/and design due
to technical update of some mo-
dels need no advertisement. Errors
expected.
8
XM-2VRSU734BT
XOMAX
EN
Thema:
Package content
Package content
Please check the accessories on
completeness.
The images serve as example. Optically the may vary from the original.
Please note: the package content
may vary due to technical updates.
A
car radio
B
Stylus
C
remote control with battery
D
installation manual
E
mounting material
F
2DIN cage
G
2DIN trim
H
ISO cable
A
C
F
E
D G
H
B
9
XM-2VRSU734BT
XOMAX
EN
Thema:
Installation
Installation
Installation notes
Here you can nd relevant installation
notes and common information.
Before the installation
WARNING!
Please read the following manual care-
fully before you install the unit.
Damages caused due to an inapprop-
riate installation will not be covered by
warranty.
If you do not want to risk your warranty
entitlement, please let the technician
install the unit in your vehicle.
» To avoid a short circuit please
disconnect the vehicle battery before
the installation. To do it properly please
The detailed installation manual
you can nd on our homepage www.
xomax.de.
The printed version of a common
installation manual you can nd in
the package.
i
!
read the manual of your vehicle.
» Make sure that your vehicle is
equipped with a car radio slot of
required size (2DIN)
» As may be the case you will need a
suitable faceplate, adapter or other
accessories. These could be provided
from your local specialist supplier.
» The connection cables may not be cutted
or short-circuited. Otherwise the warranty
becomes invalid.
» Before the installation please make
sure that your vehicle has the 12 Volt
on-board power supply.
» The minus (-) should be connected
with the ground (GND) (negative).
» Please tag the polarity of the avai-
lable speakers before you disconnect
the vehicle battery.
» A proper grounding of the unit's
housing requires a clean ground
connection. Thus the grounding area
should be rust-, stain- and dust-free.
» Please ground the cable separately
from other heavy current devices such
as an amplier etc.
» Please ensure that the colored cables
are connected according to the wiring
diagram. The wrong wiring may lead to
malfunctions or even damages of the
electric elements of the vehicle.
» Please note that the connection
cables of this unit and of the other
devices may have the same purpose
Wir empfehlen, die Installation
von einer fachkundigen Person oder
einer Fachwerkstatt durchführen zu
lassen.
!
10
XM-2VRSU734BT
XOMAX
EN
Thema:
Installation
but the different color. For this reason
while connecting this unit with the
other devices please ensure that both
of the cables in each case have the
same purpose. To connect everything
correctly please refer to the manuals of
the both devices.
» Please ensure that the negative
speaker cable is in each case connected
with the negative speaker terminal of
the ISO port. Do not ever connect the
negative speaker cables with the vehicle
body.
» This unit is designed and construed
for connection with 4 speakers. Do not
combine this unit with devices that are
designed and construed for connection
with 2 speakers.
» The speakers should feature the
impedance of 4-8 Ohm and a sufcient
wattage.
» Please ensure that the speakers you
are connecting with the unit are intact.
Damaged speakers can impair the unit.
» To avoid a short circuit please isolate
all cable junctions and endings of the
unused cables with the electrical tape.
» All the cables should be layed and
xated tidy and properly. The cables
should not contact any movable or hot
objects.
» If your vehicle doesn't have an "ACC"
ignition position, please connect the red
cable with the ignition switch. Other-
wise the unit will not turn off automati-
cally, causing the discharging of the
vehicle battery.
» To avoid a rogue and hazardous
short circuit do not lay the yellow cable
through the engine bay in order to
connect it with the vehicle battery.
» Do not ever connect speaker cables
among one another. In case you do not
want to connect all the 4 speakers with
the unit please isolate the endings of
unused cables with the electrical tape
to prevent a short circuit.
» Do not ever connect the negative
speaker cables with the vehicle body.
» To ensure a awless performance of
the unit the intergration angle should
amount to +/- 30.
11
XM-2VRSU734BT
XOMAX
EN
Thema:
Panel introduction
Panel introduction
1
? / MENU Power/Menu button
Press this button will turn on power, during
working longer press this button will turn
offpower,
on any mode, shortly press will return main
menu.
2
MODE Mode button
Press this button for a short moment to
turn on power, Every button-press acti-
vates mode change as follows: [Radio],
[SD], [AV-IN], [BT], [AUX], [U S B1].
Note: When the device without connection to
USB, SD the system will automatically skip
these related working mode.
3
SD CARD microSD-card slot
Insert SD card so as to read audio/
video les.
4
VOL/ MUTE Volume / mute on / off
VOL
Knopf drehen
Press this button to turn off volume
output, press it again to restore the
previous volume level.
Long press MUTE button to turn off TFT
screen, and short press it so that TFT
screen shall be re-lit.
Press this button to increase/reduce the
volume.
5
USB USB slot
Insert USB removable device so as to
read audio/video files.
Warning: You can only use either front
or rear USB at a time. Never connect
both front and rear USB at the same
time! This could cause malfunctions.
12
XM-2VRSU734BT
XOMAX
EN
Thema:
Panel introduction
6
AUX AUX input port
To input external audio.
Warning: You can only use either front
or rear AUX at a time. Never connect
both front and rear AUX at the same
time.
7
RST Reset to default
Press this hole with a pointed tool,
and the device shall restore to default
settings after restarting.
8
IR Infrared receiver
To receive infrared signal from the
remote control.
9
MIC Bluetooth microphone input port
13
XM-2VRSU734BT
XOMAX
EN
Thema:
Remote control function
Remote control function
1. PWR Press once to switch on, press
again to switch off.
2. MUTE Press once to turn off audio
output, press again to resume volume
level.
3. NAVI unsupported.
4. SOURCE Press this button change
mode.
5. EQ Press this button at the can switch
between different modes.
6. SEEK-/8 und SEEK+/7
In normal playing of MP3/USB/SD songs,
press this button to play previous song
or next song.
7. VOL- / VOL+
Press this button to increase or
decrease volume level.
8. SEL Press this button to choose sound
feature.
9. LOUD Press this button to startup
LOUD function.
10. BAND In radio mode, press this button
to choose band.
11. LOC/RDM
In radio mode, press this button to
switch between local and direction.
In USB/SD mode, press this key to
randomly play.
12. Press this button to stop playing,
press again to continue playing.
13. < Press this button to switch between
play and pause. In stop mode,press this
button to play.
14. FB / FF Press this button to fast
forward/fast backward.
15. 0-9 In Audio/Radio mode, press
number button + enter button to choose
desired song section/preset stations.
In Video mode, press GOTO button+
number button + enter button to choose
desired song section/preset stations.
16. AMS In radio mode, press this button
to browse stored stations.
17. TITLE unsupported.
14
XM-2VRSU734BT
XOMAX
EN
Thema:
Remote control function
18. AUDIO unsupported.
19. GOTO In playing mode, press this
button with number button + enter
button, you can choose songs/videos to
play.
20. SUB-T unsupported.
21. PBC unsupported.
22. Š > ‰ ‹ When playing MP3/USB/SD,
press these buttonsto choose playing
menu.
23. RPT In Audio mode, press this button
to play repeatedly.
24. ANGLE unsupported.
25. ST In radio mode, press this button to
choose stereo or mono station.
26. OSD Press this button to show screen
display, like playing time, title, etc.
27. ZOOM unsupported.
28. MENU Press button to back to the main
menu.
15
XM-2VRSU734BT
XOMAX
EN
Thema:
Connection schedule – Cinch multicore
Connection schedule – Cinch multicore
16
XM-2VRSU734BT
XOMAX
EN
Thema:
ISO cable connections
ISO cable connections
We recommend you to let a
professional technician install the
unit in your vehicle.
!
ISO plug
This plug connects the ISO cable with
the vehicle. The ISO cable as such
serves as an extension cable for an
eased connection of the unit to the
vehicle provided that the vehicle has a
standardized ISO plug with the approp-
riate pin assignment.
Terminal plug
This plug connects the ISO cable with
the unit.
17
XM-2VRSU734BT
XOMAX
EN
Thema:
Connection schedule – ISO plug
Connection schedule – ISO plug
18
XM-2VRSU734BT
XOMAX
EN
Thema:
ISO plug configuration
ISO plug configuration
2 1 2 1
4 3 4 3
6 5 6 5
8 7 8 7
A
B
Socket A (power supply)
On the A side you can nd the socket
for power supply.
A1 – spare
A2 – spare
A3 – spare
A4 - +12V battery / steady plus (yello)*
A5 – (+) electric antenna (blue)
A6 – spare
A7 - +12Volt ignition plus (red)*
A8 – (-) minus / ground (black)
* - Some vehicle manufacturers use
their own pin assignment. Especially
the terminals A7 (ignition plus) and A4
(steady plus) are often interchanged.
The incorrect connection in this case
leads to following problem: the unit
can not be turned on if the ignition is
off and all the saved settings are lost
as soon as the unit will be turned off. If
these problems appear the connections
A4 and A7 should be interchanged.
Socket B (loud speakers)
On the B side you can nd the speakers
terminals.
B1 – (+) rear right (violet)
B2 – (-) rear right (violet/black)
B3 – (+) front right (gray)
B4 – (-) front right (gray/black)
B5 – (+) front left (white)
B6 – (-) front left (white/black)
B7 – (+) rear left (green)
B8 – (-) rear left (green/black)
The terminals are coloured by pairs, in
each case one (+) and one (-).
Though the design of ISO plug is
standardized, it's pin assigment is not
and may vary. Thus in case of mis-
match of connections due to different
pin assignments a simple plug'n'play
connection may lead to grievous errors.
!
19
XM-2VRSU734BT
XOMAX
EN
Thema:
ISO cable connections
1
2
We recommend you to let a
professional technician install the
unit in your vehicle.
!
ISO cable connections
ISO cable
1. Terminal plug
This plug connects the ISO cable
with the unit.
2. ISO plug
This plug connects the ISO cable
with the vehicle. The ISO cable as
such serves as an extension cable
for an eased connection of the unit
to the vehicle provided that the
vehicle has a standardized ISO plug
with the appropriate pin assignment.
Please note
» The multicore cable may vary depen-
ding on the current model. Though the
conguration of the loud speakers- and
power supply- cables (steady plus,
ignition plus, ground) is consistent.
» Certain patches could be possibly
found not only on the ISO interface
(socket/plug), but immediately on the
device, e.g. ports for the handbrake,
rearview camera, steering wheel
remote control etc.
» The ISO port may be already inte-
grated in certain units. In this case
an additional ISO cable becomes
unnecessary.
illustration similar
20
XM-2VRSU734BT
XOMAX
EN
Thema:
Startup operations
Replacement instructions:
1. Remove the battery compartment:
push it to the left rst, then pull it out.
2. Remove the old battery and insert
the new one (CR-2025 Lithium).
3. Insert the battery compartment back
into the remote control till it clicks into
place.
Startup operations
Usage of the remote control
Before the rst usage please remove
the isolation plate.
Aim the remote control at the IR
receiver on the front operating panel.
The IR receiver should not be blocked.
As soon as the remote control does
not work proper the battery should be
replaced.
Do not expose the remote control to
direct sunlight or air heater.
Replacement of the battery
The remote control is operated by
CR-2025 Lithium battery.
As soon as the remote control does
not work proper the battery should be
replaced.
!
21
XM-2VRSU734BT
XOMAX
EN
Thema:
External input operation
Unit on/off
Press the ? button to turn the unit
on.
If the unit is already on, keep the ?
button pressed for a couple of seconds
to turn it down.
Insert a micro SD card
Insert a micro SD card into the slot with
the label side up and the pin side down.
Make sure that the card is intact and
dirt-free.
Insert a USB flash drive
Insert an USB ash drive proper into a
USB plug.
Do not insert any heavy or big USB
ash drives in order not to hit it
accidently - it could cause damages of
the USB plug or USB ash drive.
Micro SD cards and USB ash
drives should have following le-
system format: Fat32. Other types
will not be supported.
i
External input operation
The AUX and AV-IN input allows you
to connect an external device of your
choice and play the content stored there
via AUX mode on unit's sound system.
It could be an MP4-Player, Smartphone,
Cellphone, Tablet, Video-Player, DVB-T
Receiver etc.
The AV-IN port has 3 regular channel:
Video (yellow), Audio Left (white or
black) and Audio Right (red).
Respectively put video/audio input
plugs of the unit into video/audio input
jacks of external device, and then touch
the icon in main interface to enter
AUX input interface.
Click the icon to enter EQ setting
interface. For detail function inst-
ruction, please refer the section “EQ
setting”.
22
XM-2VRSU734BT
XOMAX
EN
Thema:
Instructions
Radio function operation
Touch icon in the main interface to
enter into the radio interface.
After touching the icon to enter
main interface, then touch any other
function icon, the radio mode will exit
automatically.
Touch the icon to return to the
upper interface.
Touch the icon to enter setting
interface.
Touch the icon to show the current
volume.
Touch the icon on radio interface to
enter the interface below:
EQ setting
Touch the icon to set sound effect
mode.
Entering the main interface
Under power-on status, press the
button MENU on the panel to switch to
the main interface.
Touch the icon or use the
touch pen/nger gently sliding around
the screen to switch to the main menu
page.
Touch the function icons so as to access
the corresponding function operations.
Instructions
23
XM-2VRSU734BT
XOMAX
EN
Thema:
Instructions
Turn on/off the Long/Short-range
Click icon, the search pattern in the
local search (LOC) and remote search
(DX) switch between.
LOC feature is turned on after the signal
is strong enough only to listen to those
in good condition and receiving radio
station; DX enabled, you can receive
remote weak radio signals.
Note: This function is available only
when FM band is selected.
Loudness on/off
Click icon so as to turn on/off
loudness function.
Stereo on/off
When receiving stereo signals, click
icon to turn on/off stereo.
PTY (Programme Type)
Touch the button the screen displays
program types, users can search
station according to program type.
TA (Receive traffic information)
ON: When the trafc station is turned
on, the radio will automatically search
for trafc stations.
After a station is searched, screen
displays “TP”. Only when trafc infor-
mation is broadcasted can it be
received, after trafc information is
completed, the radio will automatically
switch to the previous mode.
OFF: Repress [TA] button to close
TA function. In other modes, trafc
announcement will automatically switch
to radio mode, after the trafc announ-
cement is completed, it will automati-
cally switch to the previous mode.
AF (Alternative Frequency)
Touch the button to turn the AF function
on/off. AF function is turned on, when
the received station signals become
weak, the radio will automatically ne-
tune to other frequencies.
When receiving an emergency announ-
cing, the screen will display warning
message.
Note: If the unit does not have RDS
function, it has no PTY/TA/AF function.
Band switching
Touch the icon on radio interface
to switch the bands among AM1, AM2,
FM1, FM2 or FM3.
Search/Store/Scan stations
Short-press the icon on the radio
interface to browse the pre-stored
stations, long-press this button to
search stations and store the strongest
signal station on the screen.
Press the icon on the radio interface
to search the next station.
24
XM-2VRSU734BT
XOMAX
EN
Thema:
Multimedia function
Press the icon on the radio interface
to search the previous station.
Multimedia function
SD/USB storage device
When connected with an external SD/
USB storage device, the unit may play-
back the music/image/video les in it.
Click the icon in SD/USB main
menu to switch to current playing
interface quickly.
Music playing
Play the music les in SD/USB device;
Click the icon in SD/USB main
menu to return to the previous le list
page.
Click the icon to enter music playing
interface.
Touch the icon in SD/USB music
interface to enter the interface below:
25
XM-2VRSU734BT
XOMAX
EN
Thema:
Multimedia function
Touch this icon to switch special
effects.
Under image-playing status, touch this
icon to enable MP3 music playing
and retouch this icon to disable the
music playing.
Video playing
Tap the icon in SD/USB main menu
to enter video playing interface; for
video playing function instruction.
Touch the two icons / to preview
the les upwards/downwards; Click the
icon to play the current le.
Image playing
Click the icon in SD/USB main menu
to enter image playing interface:
Touch this icon to rotate the image.
26
XM-2VRSU734BT
XOMAX
EN
Thema:
Bluetooth function operation
Bluetooth function opera-
tion
Enter/exit
Touch icon in the main interface to
enter the BT interface.
Touch icon to exit BT interface.
Touch icon to exit BT interface and
enter the main interface.
Touch icon to exit BT interface and
enter setting interface.
Pair/link
To use BT hand-free function, make
connection rst, i.e. match the host
with the BT mobile phone.
Operation methods:
Set the host to be matching state, and
open the BT of your mobile phone and
use the mobile phone to search device,
the mobile phone shall prompt to match
password with the BT when it has
searched the BT device.
Input BT password 0000 to the mobile
phone and conrm. The mobile phone
shall prompt whether authorize to this
device, please select [Yes].
NOTE: Phone and BT shall automatically
connect within 20 seconds. Under any
working mode, the host shall convert to
BT state if there is an incoming call. And
the host shall restore to current mode
after hanging up.
When the BT device matches with this
device, the connection status shall
display [LINK OK], otherwise, it shall
display [NO LINK].
Dialing
You can dial on mobile phone directly
or input phone number through the
number buttons on the screen, click to
delete if there is input error.
After input the phone number, click to
make a call, and click to hang
up the phone.
During talking, click the icon
to switch voice output between car
speaker and mobile.
Call records
Touch the icon in BT interface to
enter calling records interface.
Touch the icon to check the
received phone numbers.
Touch the icon to check the dialed
phone numbers.
27
XM-2VRSU734BT
XOMAX
EN
Thema:
Bluetooth function operation
Touch the icon to check the calling
records upwards.
Touch the icon to check the calling
records downwards.
Touch the icon to check the missed
phone numbers.
Phonebook
Tap the icon in BT interface,
the dialogue box “Sure to download
records” will pop up on the screen.
Touch to download the phone
numbers in your mobile to the phone
book of the machine.
In BT phone book, touch the icon
/ to nd a phone number upwards
or downwards. Tap the rst letter of a
name via the keypadto search a phone
number in your phone book quickly.
Touch the icon to delete all phone
numbers downloaded in your phone
book.
Pairing records
Touch the icon in BT interface to
enter BT pairing interface and check all
pairing records.
Touch the button to check the
pairing records upwards.
Touch the button to check the
pairing records downwards.
Touch the icon to search a mobile
BT device.
Incoming call displaying
Under any mode, the system will switch
to BT hands-free interface automati-
cally when there is an incoming call,
together with incoming-call music and
incoming-call displaying to remind you
to answer the call.
28
XM-2VRSU734BT
XOMAX
EN
Thema:
Steering wheel setting
Bluetooth music
Touch the icon in Bluetooth inter-
face to enter Bluetooth-Music interface.
- Play/Pause
-Previous song
- Next song
Steering wheel setting
Touch the icon in main interface to
enter learning steering wheel setting
interface.
Touch the icon to resume the
initial setting.
After setting, touch the icon to
nish the setting.
Calendar setting
Touch the icon in main interface to
enter calendar setting interface.
Touch the icon or in calendar
interface to set Year, Month, Date.
Touch the numbers on calendar inter-
face to set the date or week informa-
tion.
29
XM-2VRSU734BT
XOMAX
EN
Thema:
Setup
Setup
Touch the icon in main interface to
enter setting interface.
Touch the icon under any mode to
switch to setting interface.
Touch the icon to enter general
setting interface.
Touch the icon to enter radio
setting interface.
Touch the icon to enter language
setting interface
Touch the icon to set play mode
switch.
Touch the icon to enter video
setting interface.
Touch the icon to set screen cali-
bration function.
General setting
Click icon on setup interface to
access general setting interface, as
shown in below :
In “General setting” interface, you are
able to set your favorable wallpaper.
Click the icon or to preview
upwards and downwards.
Language setting
During use, you can select your familiar
language to display menu by language
setup. Click icon on setup interface
to access language setting interface, as
shown in below:
In the languagebar you
need to set, touch the correspondin-
gicon or to select your familiar
language.
Audio setting
Click the icon in setting interface
to enter audio setting interface, click
30
XM-2VRSU734BT
XOMAX
EN
Thema:
Setup
the icon to enter equalizer setting
interface.
Drag the icon to implement relevant
settings.
Touch the icon to enter sound effect
relevant setting interface.
Touch the icon to return to the
initial setting.
Video setting
Click icon on setup interface to
access video setting interface, as shown
in below:
In video setting interface, you may set
the [ASPECT RATIO], [BRIGHTNESS],
[CONTRAST], [SATUR ATION], [HUE] for
the video.
Touch calibration
If touch calibration error occurs, you
can adjust the touch coordinate by
[Touch calibration].
Click the icon in setting interface to
enter “Calibrate” interface.
Use touch pen to click the center of “+
icon, and move along with center of “+
icon so as to calibrate the screen. It
shall automatically save data and exit
after screen calibration.
Please accurately click all positions
on screen, or the accuracy of touch
calibration shall be affected.
31
XM-2VRSU734BT
XOMAX
EN
Thema:
Rear view camera (optional)
Rear view camera
(optional)
Common information
A rear view camera is an optional
accessory. Please inform yourself by
your local specialist supplier about
current models and their options and
possibilities.
You can nd compatible cameras on the
homepage: www.carmediashop.de
All the cameras are equipped with video
cinch output.
Rear view cameras are to be installed at
the rear of the vehicle. They serve as a
parking assist element and an auxiliary
extension of the viewing angle while
reversing.
! Please do not rely on the ca-
mera's picture only while reversing.
A rear view camera serves as an
additional assistance, it can not sub-
stitude your full attention driving.
!
Connection
The camera port CAM is located on the
rear side of the unit.
The yellow cinch jack is the terminal
for the incoming video signal from the
camera. Plug the video cable of the
camera into it.
The unit's cable as well as the camera
itself has to be connected with the rear
lights of the vehicle 12V) to ensure
the correct functionality of the camera
mode.
Start the rear view camera mode
If the camera was connected properly
the unit switches automatically to the
camera mode as soon as you shift the
reverse gear. As soon as you shift any
other gear the unit switches back to the
previous mode.
32
XM-2VRSU734BT
XOMAX
EN
Thema:
Common solutions
The describtion of the
problem
The cause and the solution
The remote control is
without function.
Solution 1:
Please ensure that the battery lm is removed. By
delivery the battery is protected by a lm which should
be removed before usage.
Solution 2:
The battery could be empty. Please replace it if required.
Solution 3:
Please make sure that the infrared receiver (labelled with
IR) on the control panel is not blocked.
Note:
You can test the functionality of the remote control as
follows: please hold the IR transmitter towards a camera
(e.g. a cell phone camera) and press any button on the
remote control. If the remote control is operative you can
see the infrared signal on the display of the used camera
device.
The unit does not turn
on.
This problem is in most cases caused due to a wrong
connection of the ISO cable.
Please review the pin assignments of the ISO cable and
ISO plug. Pay attention to the proper connection of the
ignition- and steady plus and correct the discrepancy if
required.
Note:
Though the design of ISO plug is standardized, it's pin
assigment is not and may vary. Thus in case of mismatch
of connections due to different pin assignments a simple
plug'n'play connection may lead to grievous errors.
Common solutions
The following advices are generally valid and refer to diverse car radios models with
the similar characteristics. Please note that some articles may refer not to your
model exactly and contain the describtion of features and functions that your model
does not support.
33
XM-2VRSU734BT
XOMAX
EN
Thema:
Common solutions
Poor radio reception:
The radio tuner nds no
broadcaster or the recep-
tion is poor.
For problem-solving regarding the radio reception it
is important to know the type of the antenna of your
vehicle.
Here are the possible solutions for each type of the
antenna:
Type 1 – passive antenna:
We recommend you to substitude the existing antenna by
the larger and therefore more efcient one.
Shark n or rod antennas (under 5 cm) are denitely
insufcient.
Type 2 – active antenna:
The vehicle provides no current for the active antenna.
In this case a phantom power is required, which provides
the active antenna with the external power supply.
Type 3 – active antenna with diversity system:
The unit provides no current for the active antenna and
has no diversity support. For this type of antenna is
required the phantom power with an integrated diversity
system.
Note:
A phantom power is not to be confused with an antenna
amplier which is far less efcient.
Radio stations are lost:
As soon as the unit will be
turned off all the stored
stations and users settings
will be lost.
This problem is caused due to a wrong connection of the
ISO cable.
Please interchange the cables for ignition plus and for
steady plus.
Caution:
If these wires have fuses the latter should be interch-
anged as well.
34
XM-2VRSU734BT
XOMAX
EN
Thema:
Recycling of an old unit
Recycling of an old unit
User information regarding recycling of
electric and electronic devices (private
households)
This symbol on products or in their
manuals implies that electric and
electronic devices at the end of their
service life should be separated from
the domestic waist.
Please hand these products for recy-
cling at municipal collection points free
of charge.
The proper disposal of these products
contributes to environment protection.
To nd the nearest collection point
or recycling yard please consult your
municipal administration.
Recycling of the battery
According to the battery decree we
make you aware of your obligation to
dispose of empty batteries at municipal
collection points.
Batteries that contain pollutants
(e.g. Hg = mercury, Pb = lead, Cd =
cadmium) are labelled with the symbol
pictured above.
At our place you can free dispose of the
empty batteries purchased at our store.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Xomax XM-2VRSU734BT bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Xomax XM-2VRSU734BT in de taal/talen: Engels als bijlage per email.

De handleiding is 7,6 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Xomax XM-2VRSU734BT

Xomax XM-2VRSU734BT Installatiehandleiding - Deutsch - 21 pagina's

Xomax XM-2VRSU734BT Gebruiksaanwijzing - Deutsch - 53 pagina's

Xomax XM-2VRSU734BT Installatiehandleiding - English - 21 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info