INSTALLATION/OWNER’S MANUAL
DVD Navigation system with 6.2” Touch Screen Display
XM-2DTSBN6215
-4-
-5-
-6- -7-
-8-
Theunit can play the following discs only
Note: The unit is compatible with DVD, DVD+/-R, VCD 1.0/2.0/3.0, SVCD, CD, CD-R, CD-RW and JPEG
CLASS 1 LASER PRODUCT
Laser product symbol: located on the rear panel of the unit, indicate this player is a class laser product, only
use weak laser and on hazardous radiation outside of the unit.
● Read through this instruction manual before installation and use.
● Do not touch the power plug with wet hand.
● Switch off the main power when the unit is not in use. (Disconnect the power plug from the power outlet
when you do not intend to use the unit for a prolonged period of time). Before moving the unit, remove the
disc from the unit/tray first.
● Do not open the cover or touch any of the components exposed out of the unit, only for qualified
technicians.
● Do not expose the unit under direct sunlight or nearby objects that radiate heat to avoid damaging the unit.
● Do not place the unit in moist and humid conditions.
● Place the unit on a flat surface and ventilative condition, place ensure the ventilation holes are not covered
to avoid overheating and malfunction.
● Clear the panel and case with soft dry cloth only, do not use any kind of thinner, alcohol or sprays.
● The apparatus shall not exposed to dripping or splashing and that no objects filled with liquids, such as
vases shall be placed on the apparatus.
Precautions
Replace the Battery
When the operational range of the remote control becomes short or non-functional, replace battery with a
new CR2025 battery. Check the battery polarity before replacement.
Replace The Battery of IR Handset
Notes on installation
-3-
Control Panel Layout Remote Control Layout Wiring Diagram General Function
-9-
-10-
-12-
One is the CD DISC
Host after power on standby disc into the disc can be automatically switched on and into the state of play,
such as machine with disc; click the DVD icon in the main interface to play after boot state,
the disc playback classification
POWER ON/OFF
After making sure that the player is properly connected with original wires,
turn the key to ACC ON position, “POW/MUTE” button or “POWR” button
or “SRC” button become RED, press the power button to turn on the player.
MUTE
Press this key to make the audio silence, press again to resume the sound.
Automatically search and preset stations
When preset stations are more than one page,click to select next page stations or
click to select last page stations.Long press , it will search stations from low frequency
FM MODE
to higher frequency, stop at the station searched and start to play that station.
Long press , it will search stations from high frequency to lower frequency,
Install The Unit (DIN front mount)
DIN FRONT-MOUNT (method A)
DIN REAR MOUNT(method B)
Install and Remove the Front Panel
-2-
Note on installation -------------------------------------------------------- 3
Precautions ------------------------------------------------------------------ 4
Control Panel Layout ------------------------------------------------------ 5
Remote Control Layout --------------------------------------------------- 6
Wiring Diagram ------------------------------------------------------------- 7
Ganeral Function ---------------------------------------------------------- 8
Disc Playback Instruction 10
USB&SD --------------------------------------------------------------- 12
BLUETOOTH OPERATION ----------------------------------- 14
The unit detial
The unit is designed for 12V DC, negative ground operation systems only. Before installing the unit, make
sure your vehicle is connected to 12V DC negative grounded electrical system.
The negative battery terminal must be disconnected before making connections which can prevent damage
to the unit from short circuiting.
Be sure to connect the correct speaker to the correct terminal. Never connect the left and right channel
speaker cables to each other or to the vehicle body. Do not block vents or radiator panels. Doing so will
cause heat to build up and may result in fire.
After completion of installation and replacement of battery, press the reset button on the front panel with a
pointed object (such as a ball point pen) to set the unit to its initial status.
Installing the Unit
1. Dashboard
2. Holder
After inserting the holder into the dasrwhboard, select
the appropriate tab according to the thickness of the
dashboard material and bend them inwards to secure
the holder in place.
3. Screw
1. Dashboard
2. Nut (5mm)
3. Plan washer
4. Screw (5*25mm)
5. Screw
6. Starp be sure to use the starp to secure the back of
the unit in place.The starp can be bent by hand to the
desired angle.
7. Plain Washer
Remove the Unit
1. Frame
2. Insert fingers into the groove in the front of frame and
pull out to remove the frame. (When reattaching the
frame,point the side with a groove downwards and
attach it).
3. Lever
Insert the levers supplied with the unit into the grooves
at both sides of the unit as shown in figure until they
click. Pulling the levers makes it possible to remove the
unit from the dashboard.
Installation using the screw holes on the sides of the
Unit.
Fastening the unit to the factory radio mounting
bracket.
1. Select a position where the screw holes of the bracket
and the screw holes of the main unit become aligned
(are fitted) and tighten the screw at 2 places on each
side.Use either truss screws (5*5 mm) or flush surface
screw (4*5 mm).
2. Screw(“T”Position).
3. Dashboard or Console.
Note: The mounting box,outer trim ring,and half-sleeve
are not used for method B installation.
Pull out the battery holder while pressing the stopper 1.
Place battery whth (+) mark facing up into the battery
holder.
Insert the battery holder into the remote controller.
Remove the front panel
Press “REL” button in the panel , pull out the A, then
slightly pull out B
Please see picture on the left
Install the front panel
Put notch B (shown as picture) onto buckle B, and then
slightly press A into the left side.
Note: Please don’t insert finger in control panel. If
connector is dirty, use a clean soft cloth to wipe it clean.
1. Power ON/OFF
2. Disc OUT/IN
3. Switch Modes
4. LCD Panel IN/OUT
5. Screen angle adjustment
6. In disc mode,select next track;
In radio mode,seek higer frequencies.
7. Screen angle adjustment
8. Enter main menu
9.
10. Play/Pause
1
12. MUTE
13. In radio mode,select bands;
In other modes,stop playback
14. In disc mode,select previous chapter;
In radio mode,seek lower frequencies.
15. UP Keys
16.
17. Exit menu
18. Left keys
19. Enter keys
20. Right keys
21. Enter image setup menu.Set Brightness
Contrast/Color with up/Down key;
Increase/decrease with left/right arrow key
22. In Bluetooth mode,it is answer/dial/redial
button;In DVD mode,use it to enlarge image.
23.
24. In Bluetooth mode,hang up the calling;
In DVD mode,it is button to enter disc main menu.
25. Select current band,section or preset
stations; Input phone numbers,etc.
26. In VCD mode,enter PBC menu
27. Enter system setup menu
28. Search and play
29. In Bluetooth mode,input *;
In other modes,switch sound tracks.
30. In Bluetooth mode,input #
In other modes,switch sound tracks
31. Repeat key
1. Press HOME to enter Main Interface
2. Time & Date display bar
3. Click to enter EQ mode
4. Click to enter Bluetooth mode
5. Background change
6. Click to enter TV mode
7. Click to enter SD mode
8. Click to enter navigation
9. Click to enter USB mode
10.Click to enter Radio mode
11.Click to enter iPod mode
12.Click to enter SWC moder
13.Click to enter AUX IN mode
14.Click to enter Calendar mode
15.Click to enter Camera mode
16.Click to enter settings interface
17.Click to enter CLOCK mode
18.Click to enter Video Set mode
19.Click to enter Audio Set mode
20.Click to enter Calculator mode
②
③
①
④
⑤
⑥
⑦
⑧
⑨
⑩
1
12
Enter playlist, there are four playback types as following
A B
A B
XM-2DTSBN6215 XM-2DTSBN6215 XM-2DTSBN6215 XM-2DTSBN6215
XM-2DTSBN6215
XM-2DTSBN6215
XM-2DTSBN6215
-11-
XM-2DTSBN6215
-14-
XM-2DTSBN6215
-15-
XM-2DTSBN6215
-13-
XM-2DTSBN6215
XM-2DTSBN6215
-16-
XM-2DTSBN6214
XM-2DTSBN6215 XM-2DTSBN6215 XM-2DTSBN6215
DIAL
ON
ESC
OSD
UP
EJECT OPEN
MENU
1 2 3
4 5 6
7 8 9
0
REPEAT
MUTE
SEL
SRC
VOL-
VOL+
BAND
ENTER
PBC
SETUP
SEARCH
*
#
AUDIO
ANGLE
ZOOM
ROOT
① ② ③ ④
⑥
⑤
⑦
⑧
⑨
⑩
1
13
14
15
16
17
18
20
19
21
22
24
23
25 26
27
28
29 31
30
1
①
②
③
④
⑥
⑤
⑨
⑩
13
14
17
18
⑦
⑧
1
15
16
19
1
21
22
23
20
21.Click to enter 5 Stones mode
22.Click to enter Puzzle mode
23.Click to enter GPS path mode
Radio Operation Instruction
stop at the station searched and start to play that station.
Click to switch between LOC and DX. In DX state it displays and removes weak signal
stations when scanning and searching stations; in LOC state it displays DX and removes weak signal
stations when scanning and searching stations; Click to switch between Stereo and Mono.
Stereo displays ,Click to switch to AM mode, and / icons become grey because
AM mode doesn’t support these two functions, the other operation is same with FM operation.
Disc Playback Instruction
Disc Playback Instruction
①
②
③ ④
⑥
⑤
⑦
1. Stop function
2. Selects track function
3. Play function
4. Selects track function
5. Random playback function
6. Looping function
7. Enter the track list and audio, video,
images category selection function
Two is the VCD DISC
Three is the DVD DISC
①
③
④ ⑥
⑦
②
⑨
⑧
1. Channel selection function
2. VCD playback menu
3. Playback progress display and fast
fixed-point play
4. Next page function
5. Last page function
6. DVD play menu option
7. DVD video Angle Choose function
8. Video and photo enlarged with reduced function
9. Voice display icon
USB & SD Card Operation Instruction
Audio playback interface
Video playback interface
Picture playback interface
USB & SD Card Operation Instruction
Disc, USB & SD card playback operation is the same, and when the disc playback operation of some
function were the same the difference is as follows:
Click to swivel
Click to select subtitle
On the left column, from top to bottom it is folder playback, video playback, picture playback and
audio playback.Folder playback is comprehensive playback, includes video, audio, picture.
The default playback mode is audio playback.The right side icons are page up/page down buttons.
Between these two icons there are playlist page numbers and current page number display.
In center of the page there is program list. The program could be selected through right side
up/down buttons and confirmed by click on the program name in the center program list,
the player will play the selected program. If there is no operation on this page, it will restore to
playback interface in 30 seconds.
BLUETOOTH OPERATION
Use the mobile phone to search BT device, when found “ CAR_KIT” , connect and input PIN code.
After successful connection, the mobile phone model will be displayed on this interface.When it is set to
automatic connection, every time the player is turned on, it will automatically connect with mobile phone,
no need to search and connect manually. When it is set to automatic answer,it will automatically answer
the incoming calls (the default setting is non-automatic answer).It is possible to revise BT device name
and PIN code in accordance with customers’ need.Because there are many mobile phone brands in the
market, the system could not match all the phones. To use the BT device normally, it is suggested
to pair the mobile phone with the BT device. When you meet some phone models could not pair
successfully, please contact with the after-sale service center.
After connected successfully,click to enter BT main page. All the buttons are operational status,
input phone numbers and click to dial out.
④
⑤
①
③
②
1. Delete input number/signs
2. Dial out/Answer incoming calling
3. Hang up the phone
4. Successful BT dial display, when dial is
5. BT volume adjustment
successful, the icon displays a phone status.
SETTING INSTRUCTION
PHONE BOOK
Click “Synchronous”, the contacts from phone will be displayed on the player simultaneously.
Click to page up/down the phonebook. Click to make a speed dial.
A2DP
When play BT music, the connected mobile phone must have music with supported audio
format. In the process of playback, click to stop; click to play last track;
click to play next track; click to pause/play.
to select General
to select Factory Set
to select Sound.
XM-2DTSBN6215 XM-2DTSBN6215
NAVIGATION SETUP
Click on system setting interface. Select the map position and confirm it,return to
the main menu page to click Navigation or press NAVI on panel to enter navigation mode.
S.W.C
The player provides the user with eight steering wheel buttons’ function which match with
most car models on the market and the operation is simple.
Firstly, make sure the steering wheel control wires from this player (usually includes two
wires, one is KEY1, the other one is KEY2) are well connected with steering wheel
buttons’ A/D wire; secondly, one hand presses a button on steering wheel, the other hand
click correspondent button on the above interface; if the setup is successful, it shows
“setup successful” and the touch button color becomes grey, the other buttons could be
setup by this way and click to complete SWC setup ; if the setup is unsuccessful or
only some of the steering wheel buttons setup successful, the user must click and
select low resistance, then repeat the setup steps from beginning again.
-18-
-19-
-17-
XM-2DTSBN6215
-20-
-21-
Radio Operation Instruction
SETTING INSTRUCTION/GPS ----------------------------------- 17
S.W.C ----------------------------------- 18
XM-2DTSBN6215
12
1. GPS NAVIGATION
2. HOME MENU
3. VOLUME SETTING
4. SETTING MENU
5. FM RADIO
6. USB SLOT
7. EJECT
8. BLUETOOTH
9. NEXT/PREVIOUS
10. DVD
11. EQ SETTING
12. SD/GPS CARD SLOT
13. AUX IN JACK
