Handleiding Xiaomi Mi Electric Scooter 1S Pro 2 Lite (pagina 5 van 83) (Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools)

801237

Verklein

Vergroot

Pagina terug

1/83

Pagina verder

06 07

5. Improper disposal of used baeries can seriously pollute the environment. Observe local regulations when disposing

of this baery pack. Do not discard this baery pack at will, to protect the natural environment.

6. Fully charge aer every use, in order to extend its baery life.

Do not place the baery in an environment where the ambient temperature is higher than 50°C or lower than -20°C (e.g.,

do not leave the scooter or the baery pack in a car under direct sunlight for an extended time). Do not throw the

baery pack into ﬁre as it may lead to baery failure, baery overheating, and even another ﬁre. If the scooter is

expected to be le idle for more than 30 days, please fully charge the baery and place it in a dry and cool place. Keep in

mind to recharge it every 60 days to protect the baery from potential damage which is beyond limited warranty.

The scooter shall be only be used with original baeries and charging of the Scooter shall only be done by the original

charging adapter supplied with the scooter (or any baery model or charging adapter model approved by the

manufacturer as compatible).

Always charge before exhausting the baery to prolong the baery's lifespan. The baery pack performs beer at

normal temperature, and poor when it is below 0°C. For instance, when it is below -20°C, the riding range is only half or

less at normal state. When the temperature rises, the riding range restores. For detailed information, please refer to Mi

Home / Xiaomi Home App.

The external ﬂexible cable of this transformer cannot be replaced; If the supply cord is damaged, it must be replaced by

a special cord or assembly available from the manufacturer or its service agent. Should you have questions, you can

contact Xiaomi's customer service available at www.mi.com.

Note: fully charged scooter will last for 120-180 days. The built-in intelligent chip will keep a log of its charging and

discharging records. The damage caused by prolonged no charge is irreversible and is beyond limited warranty. Once the

damage is done, the baery cannot be recharged (non-professionals are forbidden to dismantle the baery pack, as it

may cause electric shock, short circuit or even major safety accidents).

In case of accident, blockage or breakdown, do not try to repair by yourself and contact an authorized repairer if the

product is still under guarantee. If not, you can contact any specialized repairer of your choice. You can ask for the list of

the authorized repairers to the customer service available at www.mi.com. For any question, please contact Xiaomi's

customer service available at www.mi.com.

Eﬀorts have been made to simplify wording in the user material for users. When an action appears too complicated for a

user, he is advised to contact an authorized or a specialized repairer or Xiaomi's customer service.

WARNING! As with any mechanical component, a vehicle is subject to high stresses and wear.

The various materials and components may react diﬀerently to wear or fatigue. If the expected service life for a

component has been exceeded, it may break suddenly, therefore risking causing injuries to the user. Cracks, scratches

and discoloration in the areas subject to high stresses indicate that the component has exceeded its service life and

please contact an authorized or a specialized repaired or Xiaomi's customer service.

Adjust the handlebar

Long-term use of the scooter may result in loose screws, causing the handlebar stem to get unstable. If you notice the

handlebar stem gets shaky when riding, follow the steps below.

Tools:

I: 8-10 mm wrench

II: 4 mm Allen key

Note: These tools are to be prepared by the user.

Steps:

1. When in the folded state, use tool I to loosen "c" (clockwise).

2. Use tool I to loosen "b" (clockwise).

3. Use tool II to adjust "a" (clockwise) to the appropriate position, and use tool I to tighten "b" (counterclockwise).

4. Fold the handlebar stem up, close the quick release lever and turn the handlebar stem clockwise to close the safety hook.

5. Shake the handlebar stem to see if the problem has been resolved.

If not, repeat step 2 and 3.

If it has, continue to step 6.

6. Return the scooter to the folded state and use tool I to tighten "c" (counterclockwise).

* Step 6 is mandatory.

a. Inner Hex Nut

b. Hex Stud

c. Hex Nut

Before adjustment, make sure the scooter is powered oﬀ and not charging.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Xiaomi Mi Electric Scooter 1S Pro 2 Lite Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info