607640
15
Verklein
Vergroot
Pagina terug
1/76
Pagina verder
15
Offset
If the temperature in an area of the room differs from
the set temperature, you can perform a temperature
offset. Press
MENU
. Select the menu item
using the setting wheel. Conrm with
OK
.
The degree setting ashes on the display.
Now set the desired temperature offset (from -5 to
+5 °C) using the setting wheel. Press
OK
. The
temperature shown on the display does not change.
Window function
If you open a window, causing the temperature to
drop rapidly, the Wireless Radiator Controller/ Timer
automatically closes the heating valve to save energy.
appears on the display. The Wireless Radiator
Controller/ Timer resumes normal operation
afterwards. To set up this function, select .
Conrm with
OK
. First select the sensitivity using
the setting wheel ( = high sensitivity, > =
moderate sensitivity (default setting) > = low
sensitivity). Conrm with
OK
.
Now select the time (10 min (factory setting) - 60
min) for which the valve should remain closed.
Conrm with
OK
.
Holiday function
You can specify a set temperature for the time
you are away. The schedule you have set resumes
after the holiday period. Press
MENU
. Select the
menu item using the setting wheel. Conrm
with
OK
. (The case symbol appears on the
display.) Use the setting wheel to set the end time for
the holiday function = date for regular heating times
to resume). Conrm with
OK
. Then enter the time
and conrm with
OK
. ashes on the display.
Now set the temperature and conrm with
OK
.
appears on the display. You can deactivate the
function with
MENU
.
Child protection
You can lock the Wireless Radiator Controller/ Timer
to prevent unauthorised operation. To do so, press
and hold
OK
+ simultaneously for approx.
2 sec. until the symbol ashes on the display.
Holding this combination again causes the symbol to
disappear and removes the lock.
Pause heating/close valve
Press
MENU
. Select the menu item using the
setting wheel. Conrm with
OK
. Use the setting
wheel to set the temperature on the display to
. The valve is now closed and operates without
a schedule. The once-weekly limescale prevention
function remains active. After the pause in heating,
switch to AUTO mode in the menu to resume the
schedule you have set.
All reset
Press
MENU
. Select the menu item using the
setting wheel. Conrm with
OK
. ashes;
conrm with
OK
.The Wireless Radiator
Controller/ Timer is now in back to the state in which
it was delivered. Proceed as though you were starting
up the device for the rst time.
The frost protection and limescale prevention
functions are automatically active:
Frost protection function
If the temperature falls below 6 °C, the Wireless
Radiator Controller/Timer opens the valve until the
temperature climbs above 8 °C. This prevents the
radiator from freezing.
Limescale prevention function
To prevent limescale from forming in the radiator
valves, the Wireless Radiator Controller / Timer
performs a limescale prevention run once per week
(Friday morning).
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Xavax 111971 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Xavax 111971 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Pools als bijlage per email.

De handleiding is 3,65 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info