575106
12
Verklein
Vergroot
Pagina terug
1/120
Pagina verder
Angle grinder EN
1312
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
INTENDED USE
The machine is intended for cutting,
roughing and brushing metal and stone
materials without using water. For cutting
metal, a special protection guard for cutting
(accessory) must be used.
1. INSTALLING THE AUXILIARY HANDLE
(See Fig. A)
You have the option of two working positions
to provide the safest and most comfortable
control of your angle grinder. The handle is
screwed clockwise into either hole on the sides
of the gear case.
Anti-vibration auxiliary handle
(WX707 WX707.1)
The anti-vibration auxiliary handle reduces
the vibrations, making operation more
comfortable and secure.
2. ADJUSTING WHEEL GUARD (See Fig. B)
Before any work on the machine itself,
pull the mains plug.
For work with grinding or cutting discs,
the wheel guard must be mounted.
Wheel Guard for Grinding
The coded projection on the wheel guard (10)
ensures that only a guard that fits the machine
type can be mounted.
Open the clamping lever (9). Place the wheel
guard (10) with coded projection into the
coded groove on the spindle of the machine
head and rotate to the required position
(working position).
To fasten the wheel guard (10), close the
clamping lever (9).
The closed side of the wheel guard (10)
must always point to the operator.
NOTE: With the clamping lever (9) open the
clamp adjusting nut (7) can be adjusted to
ensure the guard is securely clamped after the
clamping lever (9) is finally closed.
Wheel Guard for Cutting
W
ARNING! For cutting metal,always
work with the wheel guard for cutting(12).
The wheel guard for cutting (12) is mounted
in the same manner as the wheel guard for
grinding(10) .
3. SPINDLE LOCK BUTTON
Clean the grinder spindle and all parts to be
mounted. For clamping and loosening the
grinding tools, lock the grinder spindle with
the spindle lock button.
Actuate the spindle lock button only when the
grinder spindle is at a standstill!
4. FITTING THE DISCS (See Fig. C1, C2, C3)
Put the inner flange onto the tool spindle. Ensure it
is located on the two flats of spindle (See Fig. C1).
Place the disc on the tool spindle and inner
ange. Ensure it is correctly located. Fit the
threaded outer flange making sure it is facing in
the correct direction for the type of disc fitted.
For grinding discs, the flange is fitted with the
raised portion facing towards the disc. For
cutting discs, the flange is fitted with the raised
portion facing away from the disc (See Fig. C2).
Press in the spindle lock button and rotate the
spindle by hand until it is locked. Keeping the
lock button pressed in, tighten the outer flange
with the spanner provided. (See Fig. C3)
USING INSTALOCK
®
TOOL-LESS FLANGE
(WX701.2 WX702.1 WX707.1)
Lock the grinder spindle with the spindle lock
button. To tighten the INSTALOCK
®
tool-less
Flange (13) firmly turn the grinding disc in
clockwise direction.
A properly attached, undamaged INSTALOCK
®
tool-less Flange can be loosened by hand
when turning the knurled ring in anti-clockwise
direction. Never loosen a tight INSTALOCK
®
tool-less Flange with pliers. Always use the
two-pin spanner.
5. SLIDE ON/OFF SWITCH (See Fig. D)
To start the power tool, push the on/off switch
(2) forward.
To lock the on/off switch (2), press the on/off
switch (2) down at the front until it engages.
To switch off the power tool, release the on/
off switch (2) or, if it is locked, briefly push
down the back of the on/off switch (2) and then
release it.
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Worx WX700 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Worx WX700 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools als bijlage per email.

De handleiding is 2,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info