575128
11
Verklein
Vergroot
Pagina terug
1/128
Pagina verder
High frequency multi-function tool EN
11
of injury from the sharp edges of the
application tools. Application tools can
become very hot while working, presenting
danger of burns!
WARNING: To reduce the risk of
injury, do not let the Universal end
cut blades or any segment saw blades
face back toward the user’s hand.
Unscrew the fastening piece (8).
Clean the tool holder, the application tool and
the fastening piece (8).
Place the application tool exactly onto
the hex-shaped tool holder. Note that the
application tool has a flush fit.
Reposition the fastening piece (8) using the
supplied allen key.
2. ADAPTER (21) (See Fig.
B3
)
Accessories of other brands (Fein
®
, Bosch
®
)
can be fitted onto the Sonicrafter
®
brand tool
using the adapter.
NOTE: Fein is a registered trademark of
C. & E. Fein GmbH. Bosch is a registered
trademark of Robert Bosch GmbH.
1) Use the allen key (23) to unscrew the
fastening piece (8) and then remove it
from the tool holder.
2) Clean the tool holder, the adapter the
application tool and the fastening piece.
3) Fit the adapter onto the tool holder,
then place the application tool onto the
adapter. Make sure that the tool holder,
the adaptor, and the application tool share
a flush fit.
4)
Reposition the fastening piece onto the
application tool and tighten with the allen key.
NOTE: Make sure the adapter matches the
application tool. The adapter (I) is matched to
the application tool of Fein
®
. The adapter (II)
is matched to the application tool of Bosch
®
.
(See Fig. B3)
3. MOUNTING/CHANGING THE
SANDING SHEET (See Fig. C)
Align the sanding sheet and press it onto the
sanding pad by hand.
Firmly press the power tool with the sanding
sheet against a flat surface and briefly switch
the power tool on. This provides for good
adhesion and prevents premature wear.
If one point has become worn, pull off the
sanding sheet, turn it 120° and place it on
again.
4. OPERATING THE ON/OFF SWITCH
To start the machine, push the On/Off switch
(2) forward so that the “I” is indicated on the
switch.
To switch off the machine, push the On/Off
switch (2) toward the rear so that the “0” is
indicated on the switch.
5. USING THE VARIABLE SPEED
CONTROL
Select oscillation frequency (speed) while
the motor is running.
The variable speed control (5) can be used
to set the optimum oscillating frequency
according to the accessories used and the
respective application.
High oscillation frequency:
Sanding, sawing, rasping and polishing
stone and metal.
Low oscillation frequency:
Polishing varnishes.
6. MOUNTING THE SUCTION DEVICE
(See Fig. D1, D2)
When vacuuming, mount the suction device
as shown in D1-D2.
NOTE: Using the sanding pad perforated.
You can only do the vacuuming after fitting
the dust collector.
7. SANDING
Typical application: Wood, metal; small
areas, especially corners, edges and places
difficult to access.
Select high oscillation frequency.
Sand with a constant movement and light
pressure.
Heavy pressure does not increase the removal
– the sanding sheet merely wears faster.
8. SAWING WITH THE SEGMENT SAW
BLADE
Typical application: Wood, plastics, sheet metal.
Select high oscillation frequency.
The saw blade lasts longer if the wear
is distributed evenly. To ensure an even
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Worx WX673 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Worx WX673 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 1,94 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info