575092
9
Verklein
Vergroot
Pagina terug
1/84
Pagina verder
Random orbital sander EN
9
start the machine.
Depress “0” on the sliding on-off switch to
stop it.
2. VARIABLE SPEED CONTROL
(See Fig D)
With the variable speed control dial (7), the
required speed can be selected (also while
running).
The required speed is dependent on the
material and is to be determined by a practical
trial.
After longer periods of working at low speed,
allow the machine to cool down by running it
for approx. 3 minutes at maximum speed with
no load.
Sanding
work
Grain
Speed
setting(opm)
Coarse
sanding
Precision
sanding
Sanding
down
varnishes
180 400 8700~11000
Stripping
paint
40 120 9800~11000
Touching
up
paintwork
120 120 7600~10000
Sanding
wood
60 240 7600~11000
Machining
veneer
180 400 8700~11000
Sanding
aluminium
80 240 7600~11000
Derusting
metal
40 120 9800~11000
Sanding
metal and
steel
120 240 9800~11000
Sanding
plexiglass
180 400 6500~8700
3. DUST BOX (See Fig E, F)
A) Attach the dust box (See Fig E)
Your sander is equipped with a dust collection
box. To attach, slide the dust box onto the
outlet piece and take care that the dust box
locks in the grooves of the outlet.
CAUTION: To prevent the possibility
of sanding dust or foreign body being
thrown into your face or eyes, never attempt
to use your sander without the dust box
properly installed.
B) Empty dust box (See Fig F)
For more efficient operation, empty dust box
every 5-10mins. This will permit the air to flow
through the box better. To empty the dust box,
pull off the dust box out of the dust extraction
outlet directly and shake out dust.
4. USING THE DUST EXTRACTION
ADAPTER (See Fig G)
Your sander is equipped with two dust
extraction adapters, which are designed for
connecting the hose of a vacuum cleaner.
If the vacuum hose is 35mm, Insert the 35mm
dust adapter (a) directly into the rear dust
outlet of sander. If the vacuum hose is 32 mm,
insert the 32 mm adapter (b) into the back of
35mm adapter (a).
NOTE: Please pull the dust adapter to make
sure tightened securely on the dust outlet.
5. SANDING SURFACES
Place the machine with the complete Sand
paper on the surface to be worked. Ensure
uniform sanding pressure. Less sanding
pressure increases the sanding capacity and
protects the machine and the sanding tool.
The removal capacity and the sanding pattern
are determined mainly by the selection of
the Sand paper (grain size), the speed of the
sanding plate and the application pressure.
ROUGH SANDING
Attach a Sand paper with coarse grain.
Apply only light sanding pressure to achieve
increased material removal.
FINE SANDING
Attach a Sand paper with fine grain. With
moderate pressure, move the machine in a
circular pattern or alternately in lengthwise
and crosswise directions over the work piece.
Do not tilt the machine to avoid sanding
through the work piece (e.g. when sanding
veneer). After finishing the work, switch off the
machine and lift it from the work piece.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Worx WX653 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Worx WX653 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools als bijlage per email.

De handleiding is 1,43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info