575071
16
Verklein
Vergroot
Pagina terug
1/172
Pagina verder
Mini multi-function saw EN
16
produce a straight cut (See Fig. N2,N3).
g) Always let the blade reach full speed, then
carefully guide the saw into the work piece.
Do not bind the blade in the cut. Push the
saw forward at a speed where the blade is
not laboring.
10. PLUNGE OR POCKET CUTTING
(Fig. Oa, Ob, Oc)
Cutting into a solid base surface
One of the major benefits of this saw is its
ability to make plunge cuts directly into the
middle, or interior of a work piece, or plunge
cut directly into a solid base surface such as
sub-flooring, siding, paneling and hardwood
or laminate flooring that is mounted on top of
sub-flooring.
a) Mark the cut line on the surface to be cut.
b) Set the depth of cut to the thickness of
the material to be cut, (sub/floor, siding,
laminate flooring, etc.)
c) Align (position) the saw base on the work
piece to your mark, using the length of cut
guide (so that your starting point lines up
with the mark corresponding to the depth
of cut setting (See Fig. D).
d) Activate the trigger safety release and
paddle switches and turn the saw On.
e) Let the blade reach full speed.
f) Manually release the blade guard release
lever while holding the finger lift bracket on
the rear of the base (See Fig. Oa).
g) A. Slowly lower the blade into the work
piece.
B. Carefully guide the saw through the line
of cut until the forward depth marking on
the length of cut guide located on the saw’s
base aligns with the end of cut marking on
your work piece. (Do not bind the blade in
the cut; push the saw blade forward at a
rate where the blade is not laboring).
C. When the cut is complete, release the
trigger safety release and paddle switch
and let the blade come to a complete stop.
Do not remove the saw and blade from the
work piece while the blade is moving. This
could damage your cut, cause kickback and
loss of control, resulting in serious injury.
h) When the blade and saw are clear of and
removed from the work piece, the lower
blade guard and base will be able to
automatically drop down and the blade
guard release lever will engage the upper
blade guard, locking the blade above the
base.
11. SAWDUST REMOVAL (See Fig. Q)
Your saw includes a hose adapter tube that
attaches to the built-in dust extraction port (7)
on the saw (See Fig. Q). This adapter tube can
be attached to a wet/dry vacuum cleaner (sold
separately). This will help remove dust, chips
and cutting debris away from the cutting area.
12. NON-SCRATCH BASE COVER
(See Fig. R)
Your saw includes a non-scratch base cover
(19). Attach it to your saw’s base when you are
cutting work pieces that have delicate surfaces
(finishes) such as vinyls, plastics, fiberglass,
laminate flooring and tiles that could easily be
scratched or scraped with the steel base on
the saw.
WORKING HINTS FOR YOUR
TOOL
If your power tool becomes too hot, please
run your circular saw no load for 2-3 minutes
to cool the motor. Avoid prolonged usage at
very low speeds.
Protect saw blades against impact and shock.
Excessive feed significantly reduces the
performance capability of the machine and
reduces the service life of the saw blade.
Sawing performance and cutting quality
depend essentially on the condition and the
tooth form of the saw blade. Therefore, use
only sharp saw blades that are suited for the
material to be worked.
MAINTENANCE
Remove the plug from the socket before
carrying out any adjustment, servicing or
maintenance.
Your power tool requires no additional
lubrication or maintenance. There are no user
serviceable parts in your power tool. Never
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Worx WX424 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Worx WX424 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 4,28 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info