575073
10
Verklein
Vergroot
Pagina terug
1/172
Pagina verder
Mini multi-function saw EN
10
ADDITIONAL SAFETY
RULES FOR YOUR MINI
MULTI-FUNCTION SAW
1. Always wear a dust mask, hearing
protection and eye protection.
2. Only use saw blades recommended for use
with this model.
3. Always wear gloves when handling saw
blades and rough material. Saw blades
shall be carried in a holder whenever
practicable.
4. Fully unwind cable drum extension to
avoid potential overheating.
5. When an extension cable is required you
must ensure it has the correct ampere
rating for your power tool and is in a safe
electrical condition.
6. Ensure your mains supply voltage is the
same as indicated on the rating plate.
7. Your mini multi-function saw is a hand held
tool, do not clamp your mini multi-function
saw to a workbench.
8. Before cutting, ensure the work piece is
free of nails, screws, etc.
9. Do not cut small work pieces with a mini
multi-function saw. If possible, use a
jigsaw.
10. Only make cuts with the blade direction
downwards, never upwards or at the side.
11. Do not use a blade unless the rated blade
speed exceeds the saw no load speed.
12. Never remove the guard system. Never
use the saw if the guard system does not
function correctly. Never lock the moving
guard open. The guard must move freely.
13. Always check walls, floors and ceilings to
avoid hidden power cable and pipes.
14. After long working periods external metal
parts and accessories could be hot.
15. Do not cut material containing asbestos.
16. Do not use mini multi-function saw to cut
tree limbs or logs.
17. Do not use any abrasive wheels.
SAFETY INSTRUCTIONS FOR ALL SAWS
WARNING
1. Keep hands away from the cutting
area and the blade. Keep your second
hand on the motor housing. If both
hands are holding the saw, they can not be
cut by the blade.
2. Do not reach underneath the work-
piece. The guard cannot protect you from
the blade below the work-piece.
3. Adjust the cutting depth to the
thickness of the work-piece. Less than
a full tooth of the blade teeth should be
visible below the work-piece.
4. Never hold piece being cut in your
hands or across your leg. Secure the
work-piece to a stable platform. It is
important to support the work properly to
minimize body exposure, blade binding, or
loss of control.
5. Hold power tool by insulated gripping
surfaces when performing an
operation where the cutting tool may
contact hidden wiring or its own cord.
Contact with a “live” wire will lso make
exposed metal parts of the power tool
“live” and shock the operator.
6. When ripping always use a rip fence
or straight edge guide. This improves
the accuracy of cut and reduces the chance
of blade binding.
7. Always use blades with correct size
and shape of arbor holes. Blades that do
not match the mounting hardware of the
saw will run eccentrically, causing loss of
control.
8. Never use damaged or incorrect blade
washers or bolt. The blade washers and
bolt are specially designed for your saw,
for optimum performance and safety of
operation.
FURTHER SAFETY INSTRUCTIONS FOR
ALL SAWS.
CAUSES AND OPERATOR PREVENTION
OF KICKBACK:
- Kickback is a sudden reaction to pinched,
bound or misaligned saw blade, causing an
uncontrolled saw to lift up and out of the
work-piece toward the operator;
- When the blade is pinched or bound tightly
by the work piece being cut, the blade
stalls and the motor reaction drives the unit
rapidly back toward the operator;
- If the blade becomes twisted or misaligned
in the cut, the teeth at the back edge of the
blade can dig into the top surface of the
wood causing the blade to climb out of the
material being cut and jump back toward
the operator.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Worx WX424.2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Worx WX424.2 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 4,28 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info