724649
11
Verklein
Vergroot
Pagina terug
1/18
Pagina verder
AFTER SALES SUPPORTe-mail: help@powertoolsupport.com
1800 909 909 (toll free)MODEL No.: DBAF50/40 • 61420 • 07/2018
AFTER SALES SUPPORTe-mail: help@powertoolsupport.com
1800 909 909 (toll free)MODEL No.: DBAF50/40 • 61420 • 07/2018
20 21
Ensure the end of the staple cartridge engages inside the guide rails at
the end of the magazine (Fig H).
3. Push the magazine (11) closed by pushing it up towards the safety
striker pin (1) end of the magazine until it closes securely (Fig I). The
magazine release latch (14) will engage and a click will be heard when
secure (Fig J).
B. Loading Nails
NOTE: Do not install nails of dierent sizes at the same time. Only 1 x
cartridge of the same size nail should be installed at each use. Loading
various nail sizes at one time will cause malfunction and void your warranty.
1. Press on the magazine release latch (14), to open the magazine (11)
(Fig E), ensuring you extend it out as far as it will release (Fig F).
2. To load nails, insert the cartridge of nails with the heads of the nails
facing to the top rear of the open magazine with the nail points facing
away (Fig K). Ensure the end of the nail cartridge engages inside the
guide rails at the end of the magazine (Fig H).
3. Push the magazine (11) closed by pushing it up towards the safety striker
pin (1) end of the magazine until it closes securely (Fig I). The magazine
release latch (14) will engage and a click will be heard when secure
(Fig J).
Depth Adjustment Wheel
WARNING: Keep the tool pointed away from yourself and others
when setting the depth adjustment. Failure to do so could result in
possible serious personal injury.
WARNING: Ensure to remove battery pack from the tool during
initial depth adjustment setting.
The depth adjustment wheel (3) (Fig L) is used for setting the depth of the
nail or the staple from the workpiece contact (nail/staple release) (2).
On each side of the depth adjustment wheel (3) is a symbol indicating
whether turning the wheel in that direction will increase or decrease the
nail / staple depth (Fig M). The range of the depth adjustment wheel (3)
is approx. 3mm.
1. When viewing the depth adjustment wheel (3) per Fig M, turning the
depth adjustment wheel (3) to the left will increase the depth of the nail
/ staple into the contact surface. If pushing all the way to the left, the nail
will be ush on the contact surface.
2. Turning the depth adjustment wheel (3) to the right will decrease the
depth of the nail / staple into the contact surface.
3. It is recommended to test the depth of adjustment doing a few test
shots, and then adjusting the wheel accordingly to reach the desired
depth required for the contact surface. Proceed to the next page for
Operation to start your product and check the adjustment.
H. I. J.
K. L. M.
CLICK
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Workzone TG212T bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Workzone TG212T in de taal/talen: Engels als bijlage per email.

De handleiding is 1,26 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info