724654
12
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
2400W Wet & Dry Vacuum
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL No.: MWW706S-35L-1200WC • 06/2018 • 61406
(toll free)
AFTER SALES SUPPORT
(toll free)
2400W Wet & Dry Vacuum
e-mail: help@powertoolsupport.com1800 909 909
MODEL No.: MWW706S-35L-1200WC • 06/2018 • 61406
20 21
Operation Operation
Automatic Mode for Electric Power Tools
1. Connect the exible hose (17) to the exible
hose outlet – suction (7) by inserting into the
outlet and aligning the arrow and locking pin on
the end of the exible hose (17), with the arrow
and ridge on the top of the exible hose outlet
– suction (7). This should ensure the locking pin
on the exible hose (17) aligns with the ridge in
the exible hose outlet – suction (7). Rotate the
exible hose (17) to the left to secure the hose
into position (Fig Z).
2. Ensure the HEPA lter (16) is secured on the
appliance head (2) (Fig AA).
3. Connect the power cable of your AC / electric
power tool to the AC outlet socket (4) (Fig AB).
The automatic AC outlet socket (4) is ideal for
power tools up to 1200W. Check the rating label
of your power tool before connecting to the AC
socket outlet (4) (Fig Y).
4. Connect the opposite end of exible hose (17)
to the dust extractor connector on your AC /
electric power tool. Check that the connections
are secure and airtight (Fig AC).
Press the ON/OFF Switch (3) to position “II” -
Automatic Mode (Fig AD).
IMPORTANT: When you switch ON” the
connected AC / electric power tool, the
vacuum switches ON at the same time.
When you switch “OFF” the connected AC /
electric power tool, the vacuum switches
OFF also (after a pre-set delay).
5. When you have nished your task, press “O
on the ON/OFF switch (3) (Fig AE).
WARNING: Check the tank (10) regularly
and empty the waste collected when it is
about 2/3 full.
AA.
AB.
AC.
Z.
AD. AE. AF.
WARNING: Check the HEPA lter (16) regularly for any blockages
which may reduce the suction and overheat the motor. If the vacuum
noise changes, immediately switch o the appliance and check the
HEPA lter (16). Clean the HEPA lter (16) (instructions can be found on page
23) and empty the tank (10) if required.
* Dust bags (61406-DB) can also be used for dust extraction in Automatic
mode for electric power tools and can be purchased separately as an
accessory. Refer to page 25 for details.
NOTE: For automatic mode ,The Wet & Dry Vacuum is tted with a thermal
cut-out device, which will automatically turn o the vacuum if the power
of an AC / electric power tool or other device you connected is over
the maximum 1200W. When this happens, immediately switch o the
appliance by pressing on the “O” on the ON/OFF switch (3), disconnect the
power tool, leave the vacuum 5-10 minutes, then,connect the power tool
with rated power up to 1200W. Press the ON/OFF switch (3) to position “II”
-Automatic Mode to continue the job.
Blowing Function
WARNING: Wear a dust mask and eye protection if blowing
creates dust that might be inhaled.
WARNING: Keep bystanders clear from blowing debris.
CAUTION: Any material left in the tank (10) may be blown out, causing injury.
1. Make sure the tank (10) is empty and completely dry before using it as a
blower.
2. Connect the exible hose (17) to the exible hose outlet – blowing (8) by
inserting into the outlet and aligning the arrow and locking pin on the
end of the exible hose (17), with the ridge on the top of the exible hose
outlet – blowing (8).
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Workzone MWW706S-35L bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Workzone MWW706S-35L in de taal/talen: Engels als bijlage per email.

De handleiding is 0,89 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info