724601
25
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
Xfinity Li-ION 20V
Instruction Manual
IMPORTANT
Read carefully before use
Keep for future reference
MODEL NUMBER
CSJ18LDA.9
Version number: 002
Multi-PURPOSE saw
2
2
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
info.aldi@positecgroup.com
CSJ18LDA.9 • 11208 • 10/2019
Welcome
Congratulations in choosing to buy a Workzone® Titanium 20V Multi-
Purpose Saw (battery / charger not included).
All products bought to you by Workzone® Titanium are manufactured
to the highest standards of performance and safety and, as part of our
philosophy of customer service and satisfaction, are backed by our
comprehensive 5 Year Warranty. We hope you will enjoy your purchase
for many years to come.
When you open your packaging, rst remove all items and check there
are no parts damaged or missing. If you nd anything wrong, do not
operate the product until the parts have been replaced or the fault has
been rectied. Failure to do so could result in serious personal injury.
3
3
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
info.aldi@positecgroup.com
CSJ18LDA.9 • 11208 • 10/2019
The product is guaranteed to be free from defects in workmanship and parts for a period of 60 months from the
date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired,
replaced or refunded at our discretion. T
conferred by this warranty are in addition to all rights and
remedies in respect of the product that the consumer has under the Competition and Consumer Act 2010 and
similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled
to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality
and the failure does not amount to a major failure.
Warranty Details
REGISTER YOUR PURCHASE AT www.aldi.com.au/en/about-aldi/product-registration/ TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION
20V Multi-Purpose Saw
4
4
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
info.aldi@positecgroup.com
CSJ18LDA.9 • 11208 • 10/2019
Contents
Application 5
Package Content List 5
Parts description 6
Description of symbols 7
General safety warnings 8
Important information – Product care 13
Assembly 13
Operation 18
Maintenance 21
Warranty 22
Environmental protection 23
FAQ/Troubleshooting 23
Technical specications 25
5
5
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
info.aldi@positecgroup.com
CSJ18LDA.9 • 11208 • 10/2019
1. Application
20V Lithium-Ion Multi-Purpose Saw
2. Package Content List
First time users or inexperienced operators pay particular attention to the
operation of the 20V Lithium-Ion Multi-Purpose Saw, including details of
starting and stopping and correct use of the 20V Lithium-Ion Multi-Purpose
Saw on pages 18-20, as well as the maintenance instructions on pages 21.
Intended use of 20V Lithium-Ion Multi-Purpose Saw (battery / charger not included)
NOTE: This product is for private domestic DIY use only. It is not suitable for
commercial or trade use.
This 20V Lithium-Ion Multi-Purpose Saw is functioned as a combination of
jigsaw and reciprocating saw. It is intended for sawing wood, plastic, metal
and building materials while resting rmly on the workpiece. It is suitable
for straight and curved cuts.
The Lithium-Ion Multi-Purpose Saw is to be used only for its prescribed
purpose. Any other use is deemed to be a case of misuse.
• 1 x 20V Lithium-Ion Multi-Purpose Saw
• 1 x 120 mm Wood cutting blade
• 1 x 85 mm Metal cutting blade
• 1 x 85 mm Aluminium cutting blade
• 1 x Carry bag
• 1 x Instruction Manual
• 1 x Warranty Card
Remove all packing materials
Ensure all parts on the contents
list are present
Check the appliance, and all
accessories for transportation
damages
WARNING! Please read and understand this instruction manual
before use and keep it for your future reference. Your product
should only be passed on together with this instruction manual.
WARNING! To reduce risk of injury, only use ALDI 20V Li-Ion Xnity
Plus battery packs. Other type of battery packs may burst causing
personal injury and damage. The battery pack must be recharged
only with an ALDI 20V Li-Ion Xnity Plus battery charger.
6
6
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
info.aldi@positecgroup.com
CSJ18LDA.9 • 11208 • 10/2019
3. Parts description
1. Motor cover
2. Pivot release lever
3. Hand grip area
4. Lock-o button
5. Battery release button*
6. Battery pack*
7. On/o switch
8. Base plate
9. Foot plate
10. Blade
a. 120 mm Wood cutting blade
b.
85 mm Metal cutting blade
c.
85 mm Aluminium cutting blade
11. Blade holder
12. Protection nger
13. LED work light (See Fig. G)
* Battery and charger shown only for illustrative purposes. Battery and
Charger not included with this saw.
11
9
12
6
7
10c
10b
10a
8
1 2 3 54
10
7
7
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
info.aldi@positecgroup.com
CSJ18LDA.9 • 11208 • 10/2019
4. Description of symbols
The instruction manual, rating plate, or on the product itself, may
show these symbols. These represent important information about
the product or instructions on its use.
To reduce the risk of injury, user must read instruction manual
Warning
Wear ear protection
Wear eye protection
Wear breathing protection
Conforms to relevant standards for electrical safety and
electromagnetic compatibility.
60 Months Warranty
60
8
8
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
info.aldi@positecgroup.com
CSJ18LDA.9 • 11208 • 10/2019
5. General safety warning
General Power Tool Safety Warnings
WARNING Read all safety warnings, instructions,
illustrations and specifications provided with this power
tool.
Failure to follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless) power
tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
b) Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators. There
is an increased risk of electric shock if your body is earthed or
grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric
9
9
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
info.aldi@positecgroup.com
CSJ18LDA.9 • 11208 • 10/2019
shock.
d) Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away from
heat, oil, sharp edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension
cord suitable for outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD) protected
supply. Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while
operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source and/
or battery pack, picking up or carrying the tool. Carrying
power tools with your finger on the switch or energising power
tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the
power tool on. A wrench or a key left attached to a rotating
part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery.
10
10
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
info.aldi@positecgroup.com
CSJ18LDA.9 • 11208 • 10/2019
Keep your hair and clothing away from moving parts. Loose
clothes, jewellery or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection can
reduce dust-related hazards.
h) Do not let familiarity gained from frequent use of tools
allow you to become complacent and ignore tool safety
principles. A careless action can cause severe injury within a
fraction of a second.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool
for your application. The correct power tool will do the job
better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from the
power tool before making any adjustments, changing
accessories, or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power tools
are dangerous in the hands of untrained users.
e) Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the power
tool’s operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly maintained
power tools.
f) Keep cutting tools sharp and clean. Properly maintained
11
11
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
info.aldi@positecgroup.com
CSJ18LDA.9 • 11208 • 10/2019
cutting tools with sharp cutting edges are less likely to bind and
are easier to control.
g) Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into account
the working conditions and the work to be performed.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean and free
from oil and grease. Slippery handles and grasping surfaces
do not allow for safe handling and control of the tool in
unexpected situations.
5) Battery tool use and care
a) Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of battery
pack may create a risk of fire when used with another battery pack.
b) Use power tools only with specifically designated battery
packs. Use of any other battery packs may create a risk of injury
and fire.
c) When battery pack is not in use, keep it away from other
metal objects, like paper clips, coins, keys, nails, screws
or other small metal objects, that can make a connection
from one terminal to another. Shorting the battery terminals
together may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected from the
battery; avoid contact. If contact accidentally occurs, flush
with water. If liquid contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or burns.
e) Do not use a battery pack or tool that is damaged
or modified. Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire, explosion or risk of
injury.
f) Do not expose a battery pack or tool to fire or excessive
temperature. Exposure to fire or temperature above 130 °C
12
12
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
info.aldi@positecgroup.com
CSJ18LDA.9 • 11208 • 10/2019
may cause explosion.
g) Follow all charging instructions and do not charge the
battery pack or tool outside the temperature range
specified in the instructions. Charging improperly or at
temperatures outside the specified range may damage the
battery and increase the risk of fire.
6) Service
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
b) Never service damaged battery packs. Service of battery
packs should only be performed by the manufacturer or
authorized service providers.
Multi-purposed Saw Safety Warnings
1. Hold the multi-purposed saw by insulated gripping
surfaces, when performing an operation where the
cutting accessory may contact hidden wiring. Cutting
accessory contacting a “live” wire may make exposed metal
parts of the power tool “live” and could give the operator an
electric shock.
2. Use clamps or another practical way to secure and
support the workpiece to a stable platform. Holding the
work by hand or against your body leaves it unstable and may
lead to loss of control.
13
13
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
info.aldi@positecgroup.com
CSJ18LDA.9 • 11208 • 10/2019
6. Important information – Product care
NOTE: Xfinity Battery and Charger not included. For any issuses
related directly to your purchased ALDI Xfinity Battery / charger,
contact the Customer Service of the manufacturer as listed on the
battery / charger packaging, manual or on the label on the battery /
charger.
This Multi-purpose saw uses Lithium Ion Battery Cells. Care MUST be
taken to ensure both the safety and life of the pack is maintained.
Ensure you have read all of the safety notes in the previous pages
before using the Multi-purposed saw.
Treat the battery pack with care and within the guidelines of this
manual.
If the battery pack does become immersed in water or any fluids,
or is subject to a severe drop or it does not operate within the
guidelines of this manual or the supplied manual, immediately STOP
using the battery pack and have it checked.
Use only ALDI Xfinity Plus 20V range of batteries and chargers.
7. Assembly
7.1 Working mode adjustment
This multi purpose saw functions as a combination jigsaw and
reciprocating saw. You can use the pivot release lever (2) to change
the configuration.
1) Lift up the pivot release lever (2) fully until it cannot be lifted
further. (See Fig. A1)
2) Rotate the front portion of the saw into any of the 6 positions
(0°, 18°, 36°, 54°, 72° and 90°) (See Fig. A2). Restore the pivot release
lever (2). Be sure to lock the pivot release lever (2) in place.
In Position I (0°), this multi purpose saw can be used as a
reciprocating saw.
In Position VI (90°), this multi purpose saw can be used as a jigsaw.
14
14
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
info.aldi@positecgroup.com
CSJ18LDA.9 • 11208 • 10/2019
WARNING! When adjusting the multi purpose saw, you can
only hold the foot plate (9) as shown in Fig.B1. Never hold the
pivot head as shown in Fig. B2, B3.
WARNING!
To avoid being pinched, keep hands away from the hinge when
changing positions.
To avoid the multi purpose saw being turned on accidentally,
remove the battery pack (6) from the saw.
Before operation, make sure the pivot release lever (2) is locked
into position.
A1
0
o
90
o
A2
B1 B2 B3
15
15
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
info.aldi@positecgroup.com
CSJ18LDA.9 • 11208 • 10/2019
7.2 Inserting / removing the saw blade (10)
WARNING! Before undertaking any work or maintenance
on the saw itself, remove the battery pack (6).
The blade (10) should extend past both the foot plate (9) and the
thickness of the workpiece during the cut. Select the blade (10) best
suitable for the material to be cut and use the shortest blade (10)
suitable for the thickness of the material.
WARNING! Cut hazard. Blade (10) breakage may occur if
the blade (10) does not extend past the foot plate (9) and
the workpiece during the cut. Increased risk of personal injury,
as well as damage to the foot plate (9) and workpiece may
result.
CAUTION: Remove the battery pack (6) first to prevent switch
actuation before making any adjustments or removing or
installing attachments or accessories.
Jig saw mode
——Inserting the saw blade (10)
WARNING! Wear protective gloves when assembling the
saw blade (10). Contact with the saw blade (10) can lead
to injuries. You can only use the t-shank blade (10) type as
shown in Fig C1.
This multi-purposed saw is equipped with a tool-free blade holder (11).
This makes possible easy and quick changing of the saw blade (10)
without any additional tools.
1) Place the jig saw upside down, rotate the blade holder (11) anti-
clockwise and hold in position.
2) Fully insert the blade (10) into the blade holder (11) slot with blade
(10) teeth facing forward to the front of the saw.
3) Release the blade holder (11) and it will self-rotate back to clamp the
blade (10) tightly. Push the blade (10) to ensure it is locked in position.
(See Fig. C2)
16
16
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
info.aldi@positecgroup.com
CSJ18LDA.9 • 11208 • 10/2019
NOTE: When using JIGSAW MODE, the blade (10) teeth face forward
to the front of the saw as shown in Fig. C3.
——Removing the saw blade (10)
WARNING: The blade may be spring ejected so protect
your eyes.
To remove a blade (10), place the jigsaw upside down, hold the
blade (10) and rotate the blade holder (11) anti-clockwise, remove
the blade (10) from the blade holder (11) slot and then release the
blade holder (11). (See Fig. C4)
C4
1
2
Reciprocating saw mode
——Inserting the saw blade (10)
1) Lift up the pivot release lever (2) fully and rotate the front
portion of the saw into 0°positions to make this multi-purpose
saw to become a reciprocating saw. Restore the pivot release
lever (2) to lock (See Fig. D1).
2) Rotate the blade holder (11) anti-clockwise and hold in position.
C1 C2 C3
1
2
17
17
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
info.aldi@positecgroup.com
CSJ18LDA.9 • 11208 • 10/2019
Fully insert the blade into the blade holder (11) slot with blade
teeth facing downwards to the base plate (8) of the saw.
3) Release the blade holder (11), and it will self-rotate back to
clamp the blade (10) tightly. Push the blade (10) to ensure it is
locked in position. (See Fig. D2)
NOTE: When using RECIPROCATING SAW MODE, the blade (10)
teeth face downwards to the base plate (8) of the saw as shown in
Fig. D3.
D1 D2 D3
1
2
——Removing the saw blade (10)
WARNING! The blade (10) may be spring ejected so
protect your eyes.
To remove a blade (10), hold the blade (10) and rotate the blade
holder (11) anti-clockwise, remove the blade (10) from the blade
holder (11) slot and then release the blade holder (11). (See Fig. D4)
D4
1
2
18
18
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
info.aldi@positecgroup.com
CSJ18LDA.9 • 11208 • 10/2019
7.3 To remove or install the battery pack (6) (Battery pack not
supplied) (See Fig. E1, E2)
Depress the battery pack release button (5) firmly first and then
slide the battery pack out (6) from your multi purpose saw.
Slide the fully charged battery pack (6) onto the saw with sufficient
force until it clicks into position.
8. Operation
WARNING:
Always wear eye protection while operating the saw.
BURN HAZARD. Do not touch the blade (10) immediately
after use. Contact with the blade (10) may result in
personal injury.
Before you begin work, ensure the material to be cut is
rigid. Small workpieces should be securely clamped to a
work table.
8.1 Switching on and off (See Fig. F)
For starting operation, press the lock-off button (4) and hold in
position, then press and hold the on/off switch (7). To switch off the
machine, release the on/off switch (7).
E1 E2
2
1
19
19
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
info.aldi@positecgroup.com
CSJ18LDA.9 • 11208 • 10/2019
For safety reasons the on/off switch (7) of the machine
cannot be locked; it must remain pressed during the entire
operation.
8.2 LED work light (See Fig. G)
An LED work light (13) is built-in near the end of the protection
finger (12). The LED work light (13) will automatically come on each
time the on/off switch (7) is depressed.
F
G
1
2
13
20
20
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
info.aldi@positecgroup.com
CSJ18LDA.9 • 11208 • 10/2019
8.3 Cutting
WARNING:
Always wear eye protection while operating the saw.
Never hold the pivot head when operating the tool.
Before cutting any type of material, be sure it is firmly
anchored or clamped to prevent slipping. Holding the
work by hand or against your body leaves it unstable and
may lead to loss of control.
Place blade (10) lightly against work to be cut, depress the
on/off switch (7) and allow it to obtain maximum speed
before applying pressure.
Whenever possible, the saw foot plate (9) must be held
firmly against the material being cut. This will prevent
the saw from jumping or vibrating and minimize blade
breakage.
Any cut which puts pressure on the blade (10), such as
angle or scroll cuts, increases potential for vibration,
kickback and blade breakage.
Shock hazard. Use extra caution when cutting overhead
and pay particular attention to overhead wires which may
be hidden from view.
Use extra caution when cutting overhead and anticipate
the path of falling branches and debris ahead of time.
Inspect work site for hidden gas pipes, water pipes,
or electrical wires before making blind or plunge cuts.
Failure to do so may result in explosion, property damage,
electric shock, and/or serious personal injury.
21
21
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
info.aldi@positecgroup.com
CSJ18LDA.9 • 11208 • 10/2019
9. Maintenance
WARNING: Remove the battery pack from the saw
before carrying out any adjustment, servicing or
maintenance.
Your power tool requires no additional lubrication or maintenance.
There are no user serviceable parts in your power tool.
Never use water or chemical cleaners to clean your power tool.
Wipe clean with a dry cloth.
Always store your power tool in a dry place.
Keep the motor ventilation slots clean.
Keep all working controls free of dust.
Occasionally you may see sparks through the ventilation slots. This is
normal and will not damage your power tool.
For battery tools
The ambient temperature range for tool and battery use and
storage is 0
o
C-40
o
C.
The recommended ambient temperature range for the charging
system during charging is 0
o
C-40
o
C.
Storage and Transportation
Before storing, remove the battery pack and any cuttings from the
blade. If necessary, use a fine brush or paintbrush to remove dirt and
cuttings.
Store the saw, the battery pack and the accessories in a dry,
clean place which is protected from the effects of weather and
temperature and is out of the reach of children and animals.
For transportation in vehicles, remove the battery pack and the
blade, secure the product against movement or falling to prevent
injury to persons or damage to this multi-purpose saw.
22
22
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
info.aldi@positecgroup.com
CSJ18LDA.9 • 11208 • 10/2019
10.Warranty
Your new WORKZONE
®
TITANIUM 20V Lithium-Ion Multi Purpose Saw
will more than satisfy your expectations.
It has been manufactured under stringent WORKZONE
®
TITANIUM
Quality Standards to meet superior performance criteria.
You will find your new 20V Lithium-Ion Multi Purpose Saw easy and
safe to operate, and, with proper care, it will give you many years of
dependable service.
CAUTION. Carefully read through this entire instruction manual before
using your new WORKZONE
®
TITANIUM 20V Lithium-Ion Multi Purpose
Saw. Take special care to heed the Cautions and Warnings.
Your WORKZONE
®
TITANIUM 20V Lithium-Ion Multi Purpose Saw
has many features that will make your job faster and easier. Safety,
performance, and dependability have been given top priority in the
development of this 20V Lithium-Ion Multi Purpose Saw, making it easy
to maintain and operate.
Use only WORKZONE
®
TITANIUM replacement parts for your product. Non-
conforming parts or modifications made to parts will void your warranty.
What your 5 year warranty means
Great care has gone into the manufacture of this product and it should
therefore provide you with years of good service when used properly. In
the event of product failure within its intended use over the course of
the first 5 years after the date of purchase, we will remedy the problem
as quickly as possible once it has been brought to our attention. In the
unlikely event of such an occurrence, or if you require any information
about the product please contact us via our after sales support services,
details of which can be found in this manual and on the product itself.
After Sales Support TEL: 1300 889 028
Service Support
If you have any issues with the operation of your product, please call us
on 1300 889 028 for advice, or email us at info.aldi@positecgroup.com
23
23
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
info.aldi@positecgroup.com
CSJ18LDA.9 • 11208 • 10/2019
11. Environmental protection
Recycle unwanted materials instead of disposing of them
as waste. All tools, hoses and packaging should be sorted,
taken to the local recycling centre and disposed of in an
environmentally safe way.
12. FAQ/Troubleshooting
Working hints for your multi-purpose saw
General
1) Always use a blade suited to the material and material thickness
to be cut.
2) Always ensure the work–piece is firmly held or clamped to
prevent movement.
3) Any movement of the material may affect the quality of the cut.
The blade cuts on the upward stroke and may chip the uppermost
surface.
24
24
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
info.aldi@positecgroup.com
CSJ18LDA.9 • 11208 • 10/2019
Troubleshooting
Symptom Possible Causes Solution
The multi purpose
saw suddenly
stops during
operation.
Overload and battery
temperature too high
Relieve the load on the
machine immediately and
allow cooling for approx.
30 seconds by running the
machine on no-load.
Low battery capacity Charge the battery pack.
Significantly
reduced cutting
efficiency.
Worn blade Replace a new blade.
Poor cut quality
Blade is worn out.
Blade is assembled
incorrectly
Pushing rate is too
fast
Make sure the blade is
sharp and not broken.
Make sure the blade is
installed properly.
Push the machine slowly
Work efficiency is
low.
Blade is worn out Change to a new blade.
Blade is not
clamped tightly by
the Blade Holder.
Blade is not inserted
into place fully.
Dismantle the blade and
reinstall it correctly.
For further inquiries or issues associated with your tool, call our
Customer Service on 1300 889 028 or email us at
info.aldi@positecgroup.com
25
25
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
info.aldi@positecgroup.com
CSJ18LDA.9 • 11208 • 10/2019
13. Technical specifications
Rated Voltage
20V
No-load speed 2500/min
Stroke length 16 mm
Product Dimensions
240*130*145mm
Cutting
capacity
Wood 50 mm
PVC pipe 45 mm
Steel 4 mm
Machine weight 1.04 kg
Safety: IEC 62841-1
IEC 62841-2-11
AS/NZS 62841.1
AS/NZS 62841.2.11
EMC: EN 55014-1
EN 55014-2
This 20V Lithium-Ion Multi Purpose Saw complies with the
following Standards:
This is a blank page
This is a blank page
ALDI guarantees that our exclusive brand products are
developed to our stringent quality specifications. If you are
not entirely satisfied with this product, please return it to your
nearest ALDI store within 60 days from the date of purchase
for a full refund or replacement, or take advantage of our after
sales support by calling the supplier‘s Customer Service Hotline.
WORKZONE
®
TITANIUM is a registered trademark of ALDI Stores
Made in China
WORKZONE
®
TITANIUM is a registered trademark of ALDI Stores
DISTRIBUTED BY:
ALDI STORES
1 SARGENTS ROAD, MINCHINBURY NSW 2770
www.aldi.com.au
AUS
25

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Workzone CSJ18LDA.9 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Workzone CSJ18LDA.9 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,12 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info