724652
2
Verklein
Vergroot
Pagina terug
1/3
Pagina verder
1 x Gauge / Screw Guide
21 x Zinc Plated Masonry Drill Bits
3 x Zinc Plated Masonry Drill Bits
4 x 300mm Flat Wood Bits
5 x Flat Wood Bits
3 x Nail Punch, 1 x Centre Punch Black Finished
4 x Hole Saws Black Finished
1 x Hole Saw Adapter Black Finished
10 x Nut Drivers
1 x Countersink Bit
4 x Drill Stoppers Black Finished
50 x High Speed Steel
Titanium Coated Drill bits
33 x 50mm
Screwdriver Bits
55 x 25mm
Screwdriver Bits
1 x Chrome Plated
Magnetic Holder Bit
High quality moulding with each
accessory having its own, clearly
marked and precise location
Innovative, heavy duty
3 compartment storage
with 2 removable drawers
66 x High Speed
Steel Black Finished
Twist Drill bits
3 x Screw
Finders
1 x 2.5mm
Allen Key
Black Finished
33 x Wood Boring
Black Finished Drill Bits
Know your product
Drill Bit Usage Guide
1. Open/loosen chuck. 2. Insert required bit. 3. Tighten chuck 4. Drill.
Quantity Description Picture Material / Application
66 High Speed Steel Black Finished Twist Drill bits (4241#)
5 each of 1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.2mm, 3.5mm and 4mm
4 each of 4.5mm, 4.8mm, 5mm and 5.5mm
1 each of 6mm, 6.5mm, 7mm, 7.5mm, 8mm, 9mm, 10mm, 11mm, 12mm and 13mm
50 High Speed Steel Titanium Coated Drill bits (4241#, Edge Ground)
4 each of 1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.2mm, 3.5mm, and 4mm
2 each of 4.5mm, 4.8mm, 5mm and 5.5mm
1 each of 6mm, 6.5mm, 7mm, 7.5mm, 8mm, 9mm, 10mm, 11mm, 12mm and 13mm
55 25mm Screwdriver Bits (CRV-6150#, Sand Blasted)
2 each of Slotted: 3mm, 4mm, 5mm, 5.5mm, 6mm, 7mm and 8mm
2 each of Phillips: #0, #1, #2 and #3
2 each of Pozi: #0, #1, #2 and #3
1 each of Square: #1, #2 and #3
1 each of Star: T10, T15, T20, T25, T27, T30, T40 and T45
1 of each Inch Hex 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, ¼”, 9/32”
1 each of Metric Hex: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 7mm
33 50mm Screwdriver Bits (CRV-6150#, Sand Blasted)
1 each of Slotted: 3mm, 4mm, 5mm, 5.5mm, 6mm, 7mm and 8mm
1 each of Phillips: #0, #1, #2 and #3
1 each of Pozi: #0, #1, #2 and #3
1 each of Square: #1, #2 and #3
1 each of Star: T10, T15, T20, T25, T27, T30, T40 and T45
1 each of Metric Hex: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 7mm
33 Wood Boring Black Finished Drill Bits (Carbon, 45#)
4 each of 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm
1 each of 7mm, 7.5mm, 8mm, 8.5mm, 9mm, 10mm, 11mm, 12mm, 13mm
21 Zinc Plated Masonry Drill Bits (Carbon: 45#, Heat treated, YG8 Tip)
2 each of 4mm x 75mm, 4.5mm x 85mm, 5mm x 85mm, 5.5mm x 85mm,
6mm x 100mm, 6.5mm x 100mm
1 each of 7mm x 100mm, 7.5mm x 100mm, 8mm x 120mm, 8.5mm x 120mm,
9mm x 120mm, 10mm x 120mm, 11mm x 150mm, 12mm x 150mm, 13mm x 150mm
10 Nut Drivers (Carbon: 45#, Sand Blasted)
1 each of 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm
5 Flat Wood Bits (Carbon: 45#, Polish)
1 each of 13mm, 16mm, 19mm, 22mm, 32mm
4 300mm Flat Wood Bits (Carbon: 45#, Polish)
1 each of 8mm, 10mm, 12mm, 14mm
4 Drill Stoppers Black Finished (Carbon: 45#)
1 each of 3mm, 5mm, 6mm, 10mm
4 Hole Saws Black Finished (Carbon: 45#)
1 each of 45mm, 54mm, 60mm, 64mm
3 Zinc Plated Masonry Drill Bits (Carbon 45#, Heat treated, YG8 Tip)
1 each of 8mm x 300mm, 10mm x 300mm, 12mm x 300mm
3 Screw Finders (ABS)
3 Nail Punch Black Finished (Carbon: 45#)
1 each of 2/32”, 3/32”, 4/32
1 Centre Punch Black Finished (Carbon: 45#) 1/32”
1 2.5mm Allen Key Black Finished (Carbon 45#)
1 Chrome Plated Magnetic Holder Bit (Carbon 45#)
1 Counter Sink (Carbon 45#, Sand Blasted)
1 Gauge / Screw Guide (Carbon: Q295W, Plaint)
1 Hole Saw Adapter Black Finished (Carbon: 45#)
Application: Designed for drilling relatively small holes.
HSS (High Speed Steel) stands up to higher temperatures
Material: Suitable for use on timber, metal, plastics and
similar materials.
Application: Designed for drilling relatively small holes.
Titanium coating increases the hardness of the bit and
adds a self-lubricating property.
Material: Suitable for use on timber, metal, plastics and
similar materials.
Application: Used for driving / removing various types
of screws. Hexagonal shank for use with majority of
power drill/ driver, and screwdriver type tools.
NOTE: Not recommended for Impact Drivers.
Material: Suitable for use on timber.
Application: Used for driving / removing various types
of screws. Hexagonal shank for use with majority of
power drill/ driver, and screwdriver type tools.
NOTE: Not recommended for Impact Drivers.
Material: Suitable for use on timber.
Application: Features “brad point” tips (aka W-point
tip) allowing easy centering/positioning of the hole to
be drilled. Designed for boring smooth, accurate holes.
Suitable for using for dowelling.
Material: Suitable for drilling into timber.
Application: Brittle materials will require slower speeds
and light to moderate pressure as material is being
ground, not broken. The fast spiral ute design creates
less heat buildup when drilling.
Material: Suitable for use when rotary drilling into
brick, cinder block, tile, plaster, stone or concrete.
Used for tightening nuts and bolts. They feature a hollow
shaft that allow removal of nuts from protruding bolts.
NOTE: Not recommended for Impact Drivers.
Application: Used to drill fairly large holes leaving a at
bottomed hole (with a central point).
Material: Suitable for use where the head of a screw/
bolt needs to be recessed into the timber.
Application: Used to drill fairly large holes leaving a at
bottomed hole (with a central point).
Material: Suitable for use where the head of a screw/
bolt needs to be recessed into the timber.
Used to clamp around the drill bit by tightening a set
screw. Suitable for drilling several holes to exactly the
same depth.
Application: Used for cutting large, xed, diameter
holes in wood or plastic. Best used in a power drill/
driver at low speed as the blade saws its way through
the material.
Material: Suitable for use in timber or plastic
Application: Brittle materials will require slower speeds
and light to moderate pressure as material is being
ground, not broken. The fast spiral ute design creates
less heat buildup when drilling.
Material: Suitable for rotary drilling into brick, cinder
block, tile, plaster, stone or concrete.
Put the screw nder onto the shaft of your drill/driver,
with the slotted bit inside the screw nder. The sleeve
centres the bit onto the heads of slotted screws, preventing
the bit from slipping out of the slot and making driving
them easier.
Nail punches are metal rods that have a small blunt
edge placed on a nail while the back of the punch is hit
with a hammer to drive the nail below the timber surface.
A centre punch is a metal rod with a conical point for
making an indentation, to allow a drill to make a hole at
the same spot without slipping.
Allen Key - tool of hexagonal cross-section used to drive
bolts and screws that have a hexagonal socket in the head.
Magnetic Bit Holder - for holding magnetic bits in place.
Counter Sink - used in a power or hand drill to form
the conical recess for the heads of countersunk screws.
Designed for use on soft materials such as timber and
plastics, not metals.
Gauge / Screw Guide - used in conjunction with driver
bits and the screw to assist with the bit aligning with the
screw head.
Hole Saw Adapter - used in conjunction with hole
saw bits.
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Workzone 300PCE bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Workzone 300PCE in de taal/talen: Engels als bijlage per email.

De handleiding is 0,57 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info