809234
15
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
15
Fault Finding
Greenstar i System ErP - 6 720 813 281 (2014/09)
7Fault Finding
In the event that the appliance stops functioning or does not perform as expected, please see table below These problems are some
of the most common causes. Should the problem persist or if other fault codes are displayed, then it will be necessary to contact
Worcester, Bosch Group.
This table gives information on basic operating system problems.
Problem Cause Remedy
EA fault code
flashing on display
No gas supply/low gas supply pressure Contact your gas supplier.
Condensate outlet blocked If it is safe to do so, check your condensate pipe
outlet for blockages, such as ice or foreign objects.
Flue blocked If it is safe to do so, check your flue outlet for damage
or blockages.
Desired room
temperature is not
reached
Thermostatic radiator valve(s) set too low Increase thermostatic radiator valve setting(s).
Temperature control for central heating flow on
appliance set too low
Increase central heating flow temperature control
setting
Low temperature setting on the room thermostat Increase setting on the room thermostat.
Air trapped in heating system Bleed radiators and re-pressurise the heating system
Low system water pressure Re-pressurise the system, refer to page 12
Desired room
temperature too
high
Thermostatic radiator valves are set to high Turn down thermostatic radiator valves.
Room thermostat is set too high Turn down room thermostat.
Radiators are too
hot
Temperature control on appliance set too high Reduce central heating temperature by turning down
the Central Heating control on appliance.
Note: This could prevent your property reaching the
desired temperature during cold weather periods.
Heating stays on
for too long
Clock is incorrectly set Check clock setting and adjust
No blue
Operation/Fault
Indicator
Momentary power failure Disconnect boiler supply, wait a few seconds then
reconnect.
Energy saving feature is activated Ask your installer to reset the blue light
Hot water
temperature too
low
Temperature set too low:
Cylinder thermostat control.
Appliance hot water control (this feature is
only available if the option integral diverter
valve has been fitted)
Check setting and adjust
Air trapped in heating system Bleed radiators and re-pressurise the heating system
Low system water pressure Re-pressurise the system, refer to page 12
Hot water
temperature too
high
Temperature set too high:
Cylinder thermostat control.
Appliance hot water control (this feature is
only available if the option integral diverter
valve has been fitted)
Check setting and adjust
Table 2 Fault finding
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Worcester-Bosch Greenstar i System Compact bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Worcester-Bosch Greenstar i System Compact in de taal/talen: Engels als bijlage per email.

De handleiding is 2.88 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info