809346
7
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
7
Installation
Comfort I– 6720810964 (2014/07)
Fig. 3 Suggested Programmer wall plate mounting
Engage the four clips on the back of the Programmer [2]
with the four slots on the wall plate as shown in figure 4
Push the Programmer down into the wall plate to secure
Engage the tabs on the top retainer [3] into the slots on the
wall plate [1] and push down onto the Programmer
Fig. 4 Fitting Timer to wall plate assembly
3.3 Time and date set up
▶Turn the boiler ON
Fit the batteries into the Room thermostat, refer to
section 9.1 for instruction on how to fit the batteries
Before mounting the Room thermostat on the wall, it is good
practice to find a position that affords good signal strength.
To check the signal strength, refer to section 6.7 S2 RF Signal
strength on page 18.
The unit will initially display an error code A21 “No wireless
signal to EMS interface”, refer to chapter 7 for information on
fault codes.
When they have established RF communications with each
other, the Programmer/Receiver display will revert to a factory
default time and date with the control in “Auto” mode for both
heating and hot water.
The Room thermostat will display the current room
temperature.
3.4 Pairing/Unpairing the units
3.4.1 Programmer/Receiver - Installer menu -
Radio settings - Pair
The Room thermostat and Programmer/Receiver must be in
the same mode of pairing.
The Programmer/Receiver Pairing/Unpairing function is found
under the Installer menu, in Radio settings and Pair.
To enter the Installer menu, press the menu button and return
button for more than three seconds.
Six icons are shown across the top of the display:
1. Heating
2. Hot water
3. Holiday
4. Info
5. Settings
6. Installer setting
Turn the knob to select the Installer icon and press the
knob to enter the function.
The Programmer/Receiver and Room
Thermostat are factory set and “Paired” to
each other, so that they are fully operational.
6720810964-24.1Wo
6720810964-25.1Wo
1
2
3
Set the current time and date
Hold the menu button down for more than
3 seconds to enter the user menu, turn the
knob to select Settings and press to enter
Refer to section 5.1.5 Info - Time/Date
for setting the Time and Date, and clock
format
The Programmer/Receiver and Room
thermostat are delivered together and are
factory paired, they automatically connect
when the system is switched on. There is no
need to pair/unpair the units during
installation, unless there is a problem with
one or both of the units.
If a faulty unit is replaced with a new unit, then
the existing unit must be unpaired before the
two units can be paired.
If the units have to be paired/unpaired, all units
must be in the same pairing/unpairing mode.
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Worcester-Bosch Greenstar Comfort I RF - 2014-2022 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Worcester-Bosch Greenstar Comfort I RF - 2014-2022 in de taal/talen: Engels als bijlage per email.

De handleiding is 4.03 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info