809240
11
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
Operation
11
Greenstar 4000 – 6 720 891 170 (2020/09)
4.3 Symbols on the display
Table 4 Symbols on the display
The heating and hot water system has been set up by the installer to its
optimum settings.
It is advised to make a note of these settings before adjusting so that
you can return to these optimum settings in the future.
4.4 Adjusting the appliance flow temperature
4.4.1 Setting the flow temperature
With underfloor heating systems observe the maximum permissible flow
temperature.
The maximum flow temperature can be adjusted between 30 °C
and 82 °C 1).
Press the (key.
The set maximum flow temperature appears.
Press the or keys to set the desired maximum flow temperature.
Table 5 Maximum flow temperature
The setting is saved automatically after two seconds.
Then the symbol is briefly displayed.
WARNING
Risk of scalding!
This appliance is supplied with the CH control set at approximately
65 °C, a temperature that should be suitable for most installations
that comply with current Building Regulations. When the boiler
switches from CH to DHW, the temperature of the hot water may
briefly exceed the DHW set point if the CH temperature is set higher
than the DHW temperature. If the CH temperature is changed to
above 65 °C, it is advisable to fit a thermostatic mixing valve (TMV) at
the point of use (e.g. before the bath hot tap or shower) to protect
vulnerable people from scalding.
Heating On/Off
Press the ( key.
The set maximum flow temperature appears.
Where a Comfort+ or Comfort+ I RF timer key is fitted the Central
Heating can be turned on with the ok key during an off period
4.5 Setting the DHW heating
Hot water functions are only available when an optional integral diverter
valve kit is fitted.
Setting the DHW temperature
Press the * key.
The set DHW temperature appears.
To set the desired DHW temperature, press the or keys.
The setting is saved automatically after two seconds.
Then the symbol is briefly displayed.
WARNING
Risk of scalding!
This appliance is supplied with the CH control set at approximately
65 °C, a temperature that should be suitable for most installations
that comply with current Building Regulations. When the boiler
switches from CH to DHW, the temperature of the hot water may
briefly exceed the DHW set point if the CH temperature is set higher
than the DHW temperature. If the CH temperature is changed to
above 65 °C, it is advisable to fit a thermostatic mixing valve (TMV) at
the point of use (e.g. before the bath hot tap or shower) to protect
vulnerable people from scalding.
Symbol Explanation
Connection with the Wi-Fi network (only available with
accessories)
Connection with Radio Frequency (RF) transmitter, e.g.
Comfort+ I RF room thermostat (only available with Key
accessories)
Central heating adjustment 1)
On: Heating is on.
auto: Heating is switched on and off according to
programmed times for heating.
Once: Move to the next on or off time and directly switch on
or off heating.
Off: Heating is off.
1) This feature is available the timer Key accessories
Central heating off
Domestic Hot water adjustment
On: Hot water preheat is on
auto 1): Hot water is switched on and off according to
programmed times for hot water.
Once 1): Hot water heating on, from the first programmed
switched-on time to the last programmed switch-off time.
Off (eco): Hot water preheat off (boiler in eco mode)
Hot water off
Displays with the appliance status code and diagnostic
code during a fault condition.
Cleaning mode, locks the screen for 15 seconds to enable
cleaning.
Central heating or hot water can be switched either
permanently on or off.
Energy consumption 2)
- Gas consumption
2) The displayed energy values are estimated based on the internal data of the
appliance. Under real conditions many factors influence the energy consumption
and the displayed energy values differ from the energy values of an energy meter.
The energy values are for information and should not be used for billing
purposes. The energy values can be used to compare the energy consumption
between different days / weeks / months.
kWh
1) The maximum value can be reduced by the service technician.
Flow temperature Sample application
Approx. 50 °C Underfloor heating system
Approx. 65 °C 1)
1) In certain cases, for example, where radiators are undersized or homes are
poorly insulated higher flow temperatures may be required, however, please
refer to the relevant scalding risk advice in this manual.
Radiator heating system
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Worcester-Bosch Greenstar 4000 - GR4700i Combi bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Worcester-Bosch Greenstar 4000 - GR4700i Combi in de taal/talen: Engels als bijlage per email.

De handleiding is 4.46 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info