809240
8
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
Prepare for operation
Greenstar 4000 – 6 720 891 170 (2020/09)
8
3.2 Topping up the system pressure
Your installer should have informed you where to find the filling system
and instructed you in its use.
NOTICE
System fill method
You must remove the “filling key” or disconnect the external filling
loop after re-pressurisation, to comply with the Water Authority
regulations.
To aid in filling the system.
Ensure the Central Heating is on.
(optional accessory)
Automatic filling facility
The automatic filling device refills the water into the heating system as
required. Your installer programmes the filling device according to your
heating system. Have your installer explain the function of the automatic
filling device to you.
Automatic refilling keeps the pressure in the heating system at the
programmed value.
Fig. 4 Automatic filling facility
Removal and replacement of bottom panel
To gain access to the filling link, remove the bottom panel.
Press in the tabs [A] and pull the bottom panel down to remove.
Fig. 5 Bottom panel
To replace the bottom panel, ensure that the tabs [B] line up with the
edges of the boiler [C] and push into place until the tabs [A] click into
place.
(optional accessory)
Keyless filling link
Locate the filling link (underneath the appliance on the right hand side)
and follow the instructions for re-pressurising the system.
Re-pressurise the system.
To start the filling process, pull the lever [1] down.
The pressure menu indicator moves, the displayed message may
change.
To stop the filling process, Release the lever [1] when the:
Pressure menu [2] indicates the pressure is ok and the pressure
menu indicator is in the green zone.
Top up the system pressure, if as a result of the air bleeding, the
pressure drops off.
Fig. 6 Keyless filling link
(optional accessory)
Keyed filling link
Remove the bottom panel to locate the filling key and filling link
(underneath the appliance on the right hand side), follow the
instructions for re-pressurising the system.
Refer to figure 7.
Locating the filling key into position.
Push the filling key [3] firmly into the body of the filling link,
ensuring the arrow [4] on the key shaft lines up with the open
padlock [1] symbol.
Turn the filling key [3] to the right, to the stop, ensure the key is
locked and that it cannot still turn. The arrow [4] should line up
with the closed padlock [2] symbol.
Re-pressurise the system.
Do not over-tighten the white knob [6] when closing.
To start the filling process, turn the white knob [6] to the left.
The pressure menu indicator moves and the displayed message
may change [5].
To stop the filling process, turn the white knob [6] to the right to close
the valve when:
The pressure menu reads OK and the pressure menu indicator is
in the green zone [7].
Top up the system pressure, if as a result of the air bleeding, the
pressure drops off.
Once the pressure has settled between 0.8 and 1.7 bar.
Ensure the valve is closed.
Remove the filling key.
Turn the filling key [3] to the left, to the stop, so that the arrow {4]
lines up with the open padlock symbol [1].
Pull the key straight down to remove. Please remember to store
the key in a safe place.
0010023397-001
A
B
B
CC
0010036333-001
0010022968-001
11
2
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Worcester-Bosch Greenstar 4000 - GR4700i Combi bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Worcester-Bosch Greenstar 4000 - GR4700i Combi in de taal/talen: Engels als bijlage per email.

De handleiding is 4.46 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info