697438
47
Verklein
Vergroot
Pagina terug
1/64
Pagina verder
47
Commissioning
GREENSPRING CWi47 – 6 720 646 322 (2015/04)
Press and hold “Program” button and press ON/OFF
button to turn appliance ON ( Fig 61).
Fig. 61
As soon as '188' is displayed, release "Program" button
, and the display should read P2.
▶Press one time to access the program P2. In the LCD
display is visible the attributed value (factory value: 12).
▶Press or to choose the fan speed suitable with
your installation, see tab. 27 for concentric conducts Ø
80/125 mm.
▶Press and hold ( 5 sec.) “Program” button until the
display flashes.
Selected value is memorized.
Fan speed for concentric flue Ø80/125 mm
9.8 Registration of remote control
Only a qualified technician is allowed to install the additional
PCB that is supplied with the remote (part number: 7709 003
736). Registration can only be made after installation on the
PCB.
The registration of the remote control must be done near the
appliance.
Turn off the hot water tap.
Turn OFF the appliance (Fig. 8, [1]).
Press and hold the programming button (Fig. 8, [3]), press
ON/OFF button (Fig.
8, [1]) to connect the appliance.
Release programming button only when LCD displays
“188”.
The LCD displays the signal "P2".
▶Press button , until it displays the signal "P3".
Press programming button again for about 1 second.
LCD panel displays one number and one rotating digit.
The number represents the remote control which is to be
registered, the first remote control will be registered with
number “0”, the second with number “1” and so on.
Test the remote control in front of the electronic box by
simultaneously pressing the
and control
buttons.
Fig. 62 Activate new control
Press both buttons on the remote control until the LCD
panel stops flashing and shows the indication “00”.
Press ON/OFF button ( Fig. 8, [1]) to disconnect the
appliance.
Remote control is now activated.
Mode Flue length
1)
1) Total flue lengths of Table 25 do not count with the first
elbow and the horizontal flue kit.
Fan speed
P2 From 1 m until 3 m 12
from 3.1 m until 7 m 13
from 7.1m until 8 m 14
Table 27
Do not set P2 to greater then 14.
6720608920-19.1AL
+
NOTE: up to 6 remote controls can be
connected to a single water heater, each with
a range distance of 30m.
Press the ON/OFF button to turn ON the
remote control and it’s ready to work.
47

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Worcester-Bosch GREENSPRING CWi47 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Worcester-Bosch GREENSPRING CWi47 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,96 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info